diff options
Diffstat (limited to 'drivers')
50 files changed, 372 insertions, 183 deletions
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 69fac06..2eebd28b 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -86,10 +86,13 @@ static void dmi_table(u8 *buf, u32 len, int num, int i = 0; /* - * Stop when we see all the items the table claimed to have - * OR we run off the end of the table (also happens) + * Stop when we have seen all the items the table claimed to have + * (SMBIOS < 3.0 only) OR we reach an end-of-table marker OR we run + * off the end of the table (should never happen but sometimes does + * on bogus implementations.) */ - while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) { + while ((!num || i < num) && + (data - buf + sizeof(struct dmi_header)) <= len) { const struct dmi_header *dm = (const struct dmi_header *)data; /* @@ -529,21 +532,10 @@ static int __init dmi_smbios3_present(const u8 *buf) if (memcmp(buf, "_SM3_", 5) == 0 && buf[6] < 32 && dmi_checksum(buf, buf[6])) { dmi_ver = get_unaligned_be16(buf + 7); + dmi_num = 0; /* No longer specified */ dmi_len = get_unaligned_le32(buf + 12); dmi_base = get_unaligned_le64(buf + 16); - /* - * The 64-bit SMBIOS 3.0 entry point no longer has a field - * containing the number of structures present in the table. - * Instead, it defines the table size as a maximum size, and - * relies on the end-of-table structure type (#127) to be used - * to signal the end of the table. - * So let's define dmi_num as an upper bound as well: each - * structure has a 4 byte header, so dmi_len / 4 is an upper - * bound for the number of structures in the table. - */ - dmi_num = dmi_len / 4; - if (dmi_walk_early(dmi_decode) == 0) { pr_info("SMBIOS %d.%d present.\n", dmi_ver >> 8, dmi_ver & 0xFF); diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index 732cb6f..4c0aa97 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -287,6 +287,7 @@ int drm_load_edid_firmware(struct drm_connector *connector) drm_mode_connector_update_edid_property(connector, edid); ret = drm_add_edid_modes(connector, edid); + drm_edid_to_eld(connector, edid); kfree(edid); return ret; diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 6591d48..3fee587 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -174,6 +174,7 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect struct edid *edid = (struct edid *) connector->edid_blob_ptr->data; count = drm_add_edid_modes(connector, edid); + drm_edid_to_eld(connector, edid); } else count = (*connector_funcs->get_modes)(connector); } diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index c300e22..33a10ce 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -147,6 +147,7 @@ struct fimd_win_data { unsigned int ovl_height; unsigned int fb_width; unsigned int fb_height; + unsigned int fb_pitch; unsigned int bpp; unsigned int pixel_format; dma_addr_t dma_addr; @@ -532,13 +533,14 @@ static void fimd_win_mode_set(struct exynos_drm_crtc *crtc, win_data->offset_y = plane->crtc_y; win_data->ovl_width = plane->crtc_width; win_data->ovl_height = plane->crtc_height; + win_data->fb_pitch = plane->pitch; win_data->fb_width = plane->fb_width; win_data->fb_height = plane->fb_height; win_data->dma_addr = plane->dma_addr[0] + offset; win_data->bpp = plane->bpp; win_data->pixel_format = plane->pixel_format; - win_data->buf_offsize = (plane->fb_width - plane->crtc_width) * - (plane->bpp >> 3); + win_data->buf_offsize = + plane->pitch - (plane->crtc_width * (plane->bpp >> 3)); win_data->line_size = plane->crtc_width * (plane->bpp >> 3); DRM_DEBUG_KMS("offset_x = %d, offset_y = %d\n", @@ -704,7 +706,7 @@ static void fimd_win_commit(struct exynos_drm_crtc *crtc, int zpos) writel(val, ctx->regs + VIDWx_BUF_START(win, 0)); /* buffer end address */ - size = win_data->fb_width * win_data->ovl_height * (win_data->bpp >> 3); + size = win_data->fb_pitch * win_data->ovl_height * (win_data->bpp >> 3); val = (unsigned long)(win_data->dma_addr + size); writel(val, ctx->regs + VIDWx_BUF_END(win, 0)); diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 3518bc4..2e3bc57 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -55,6 +55,7 @@ struct hdmi_win_data { unsigned int fb_x; unsigned int fb_y; unsigned int fb_width; + unsigned int fb_pitch; unsigned int fb_height; unsigned int src_width; unsigned int src_height; @@ -438,7 +439,7 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) } else { luma_addr[0] = win_data->dma_addr; chroma_addr[0] = win_data->dma_addr - + (win_data->fb_width * win_data->fb_height); + + (win_data->fb_pitch * win_data->fb_height); } if (win_data->scan_flags & DRM_MODE_FLAG_INTERLACE) { @@ -447,8 +448,8 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) luma_addr[1] = luma_addr[0] + 0x40; chroma_addr[1] = chroma_addr[0] + 0x40; } else { - luma_addr[1] = luma_addr[0] + win_data->fb_width; - chroma_addr[1] = chroma_addr[0] + win_data->fb_width; + luma_addr[1] = luma_addr[0] + win_data->fb_pitch; + chroma_addr[1] = chroma_addr[0] + win_data->fb_pitch; } } else { ctx->interlace = false; @@ -469,10 +470,10 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) vp_reg_writemask(res, VP_MODE, val, VP_MODE_FMT_MASK); /* setting size of input image */ - vp_reg_write(res, VP_IMG_SIZE_Y, VP_IMG_HSIZE(win_data->fb_width) | + vp_reg_write(res, VP_IMG_SIZE_Y, VP_IMG_HSIZE(win_data->fb_pitch) | VP_IMG_VSIZE(win_data->fb_height)); /* chroma height has to reduced by 2 to avoid chroma distorions */ - vp_reg_write(res, VP_IMG_SIZE_C, VP_IMG_HSIZE(win_data->fb_width) | + vp_reg_write(res, VP_IMG_SIZE_C, VP_IMG_HSIZE(win_data->fb_pitch) | VP_IMG_VSIZE(win_data->fb_height / 2)); vp_reg_write(res, VP_SRC_WIDTH, win_data->src_width); @@ -559,7 +560,7 @@ static void mixer_graph_buffer(struct mixer_context *ctx, int win) /* converting dma address base and source offset */ dma_addr = win_data->dma_addr + (win_data->fb_x * win_data->bpp >> 3) - + (win_data->fb_y * win_data->fb_width * win_data->bpp >> 3); + + (win_data->fb_y * win_data->fb_pitch); src_x_offset = 0; src_y_offset = 0; @@ -576,7 +577,8 @@ static void mixer_graph_buffer(struct mixer_context *ctx, int win) MXR_GRP_CFG_FORMAT_VAL(fmt), MXR_GRP_CFG_FORMAT_MASK); /* setup geometry */ - mixer_reg_write(res, MXR_GRAPHIC_SPAN(win), win_data->fb_width); + mixer_reg_write(res, MXR_GRAPHIC_SPAN(win), + win_data->fb_pitch / (win_data->bpp >> 3)); /* setup display size */ if (ctx->mxr_ver == MXR_VER_128_0_0_184 && @@ -961,6 +963,7 @@ static void mixer_win_mode_set(struct exynos_drm_crtc *crtc, win_data->fb_y = plane->fb_y; win_data->fb_width = plane->fb_width; win_data->fb_height = plane->fb_height; + win_data->fb_pitch = plane->pitch; win_data->src_width = plane->src_width; win_data->src_height = plane->src_height; diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index b773368..38a7425 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1487,7 +1487,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, goto err; } - if (i915_needs_cmd_parser(ring)) { + if (i915_needs_cmd_parser(ring) && args->batch_len) { batch_obj = i915_gem_execbuffer_parse(ring, &shadow_exec_entry, eb, diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 0a52c44..9c5451c 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -1322,7 +1322,7 @@ int intel_sprite_set_colorkey(struct drm_device *dev, void *data, drm_modeset_lock_all(dev); plane = drm_plane_find(dev, set->plane_id); - if (!plane) { + if (!plane || plane->type != DRM_PLANE_TYPE_OVERLAY) { ret = -ENOENT; goto out_unlock; } @@ -1349,7 +1349,7 @@ int intel_sprite_get_colorkey(struct drm_device *dev, void *data, drm_modeset_lock_all(dev); plane = drm_plane_find(dev, get->plane_id); - if (!plane) { + if (!plane || plane->type != DRM_PLANE_TYPE_OVERLAY) { ret = -ENOENT; goto out_unlock; } diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h index c648e19..243a36c 100644 --- a/drivers/gpu/drm/radeon/cikd.h +++ b/drivers/gpu/drm/radeon/cikd.h @@ -2129,6 +2129,7 @@ #define VCE_UENC_REG_CLOCK_GATING 0x207c0 #define VCE_SYS_INT_EN 0x21300 # define VCE_SYS_INT_TRAP_INTERRUPT_EN (1 << 3) +#define VCE_LMI_VCPU_CACHE_40BIT_BAR 0x2145c #define VCE_LMI_CTRL2 0x21474 #define VCE_LMI_CTRL 0x21498 #define VCE_LMI_VM_CTRL 0x214a0 diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 5587603..33d5a4f 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1565,6 +1565,7 @@ struct radeon_dpm { int new_active_crtc_count; u32 current_active_crtcs; int current_active_crtc_count; + bool single_display; struct radeon_dpm_dynamic_state dyn_state; struct radeon_dpm_fan fan; u32 tdp_limit; diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 63ccb8f..d27e4cc 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -76,7 +76,7 @@ static bool igp_read_bios_from_vram(struct radeon_device *rdev) static bool radeon_read_bios(struct radeon_device *rdev) { - uint8_t __iomem *bios; + uint8_t __iomem *bios, val1, val2; size_t size; rdev->bios = NULL; @@ -86,15 +86,19 @@ static bool radeon_read_bios(struct radeon_device *rdev) return false; } - if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) { + val1 = readb(&bios[0]); + val2 = readb(&bios[1]); + + if (size == 0 || val1 != 0x55 || val2 != 0xaa) { pci_unmap_rom(rdev->pdev, bios); return false; } - rdev->bios = kmemdup(bios, size, GFP_KERNEL); + rdev->bios = kzalloc(size, GFP_KERNEL); if (rdev->bios == NULL) { pci_unmap_rom(rdev->pdev, bios); return false; } + memcpy_fromio(rdev->bios, bios, size); pci_unmap_rom(rdev->pdev, bios); return true; } diff --git a/drivers/gpu/drm/radeon/radeon_mn.c b/drivers/gpu/drm/radeon/radeon_mn.c index a69bd44..572b4db 100644 --- a/drivers/gpu/drm/radeon/radeon_mn.c +++ b/drivers/gpu/drm/radeon/radeon_mn.c @@ -122,7 +122,6 @@ static void radeon_mn_invalidate_range_start(struct mmu_notifier *mn, it = interval_tree_iter_first(&rmn->objects, start, end); while (it) { struct radeon_bo *bo; - struct fence *fence; int r; bo = container_of(it, struct radeon_bo, mn_it); @@ -134,12 +133,10 @@ static void radeon_mn_invalidate_range_start(struct mmu_notifier *mn, continue; } - fence = reservation_object_get_excl(bo->tbo.resv); - if (fence) { - r = radeon_fence_wait((struct radeon_fence *)fence, false); - if (r) - DRM_ERROR("(%d) failed to wait for user bo\n", r); - } + r = reservation_object_wait_timeout_rcu(bo->tbo.resv, true, + false, MAX_SCHEDULE_TIMEOUT); + if (r) + DRM_ERROR("(%d) failed to wait for user bo\n", r); radeon_ttm_placement_from_domain(bo, RADEON_GEM_DOMAIN_CPU); r = ttm_bo_validate(&bo->tbo, &bo->placement, false, false); diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 33cf410..c1ba83a 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -837,12 +837,8 @@ static void radeon_dpm_thermal_work_handler(struct work_struct *work) radeon_pm_compute_clocks(rdev); } -static struct radeon_ps *radeon_dpm_pick_power_state(struct radeon_device *rdev, - enum radeon_pm_state_type dpm_state) +static bool radeon_dpm_single_display(struct radeon_device *rdev) { - int i; - struct radeon_ps *ps; - u32 ui_class; bool single_display = (rdev->pm.dpm.new_active_crtc_count < 2) ? true : false; @@ -858,6 +854,17 @@ static struct radeon_ps *radeon_dpm_pick_power_state(struct radeon_device *rdev, if (single_display && (r600_dpm_get_vrefresh(rdev) >= 120)) single_display = false; + return single_display; +} + +static struct radeon_ps *radeon_dpm_pick_power_state(struct radeon_device *rdev, + enum radeon_pm_state_type dpm_state) +{ + int i; + struct radeon_ps *ps; + u32 ui_class; + bool single_display = radeon_dpm_single_display(rdev); + /* certain older asics have a separare 3D performance state, * so try that first if the user selected performance */ @@ -983,6 +990,7 @@ static void radeon_dpm_change_power_state_locked(struct radeon_device *rdev) struct radeon_ps *ps; enum radeon_pm_state_type dpm_state; int ret; + bool single_display = radeon_dpm_single_display(rdev); /* if dpm init failed */ if (!rdev->pm.dpm_enabled) @@ -1007,6 +1015,9 @@ static void radeon_dpm_change_power_state_locked(struct radeon_device *rdev) /* vce just modifies an existing state so force a change */ if (ps->vce_active != rdev->pm.dpm.vce_active) goto force; + /* user has made a display change (such as timing) */ + if (rdev->pm.dpm.single_display != single_display) + goto force; if ((rdev->family < CHIP_BARTS) || (rdev->flags & RADEON_IS_IGP)) { /* for pre-BTC and APUs if the num crtcs changed but state is the same, * all we need to do is update the display configuration. @@ -1069,6 +1080,7 @@ force: rdev->pm.dpm.current_active_crtcs = rdev->pm.dpm.new_active_crtcs; rdev->pm.dpm.current_active_crtc_count = rdev->pm.dpm.new_active_crtc_count; + rdev->pm.dpm.single_display = single_display; /* wait for the rings to drain */ for (i = 0; i < RADEON_NUM_RINGS; i++) { diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index 2456f69..8c78723 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -495,7 +495,7 @@ static int radeon_debugfs_ring_info(struct seq_file *m, void *data) seq_printf(m, "%u free dwords in ring\n", ring->ring_free_dw); seq_printf(m, "%u dwords in ring\n", count); - if (!ring->ready) + if (!ring->ring) return 0; /* print 8 dw before current rptr as often it's the last executed diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index d02aa1d..b292aca 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -598,6 +598,10 @@ static void radeon_ttm_tt_unpin_userptr(struct ttm_tt *ttm) enum dma_data_direction direction = write ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE; + /* double check that we don't free the table twice */ + if (!ttm->sg->sgl) + return; + /* free the sg table and pages again */ dma_unmap_sg(rdev->dev, ttm->sg->sgl, ttm->sg->nents, direction); diff --git a/drivers/gpu/drm/radeon/vce_v2_0.c b/drivers/gpu/drm/radeon/vce_v2_0.c index 1ac7bb8..fbbe78f 100644 --- a/drivers/gpu/drm/radeon/vce_v2_0.c +++ b/drivers/gpu/drm/radeon/vce_v2_0.c @@ -156,6 +156,9 @@ int vce_v2_0_resume(struct radeon_device *rdev) WREG32(VCE_LMI_SWAP_CNTL1, 0); WREG32(VCE_LMI_VM_CTRL, 0); + WREG32(VCE_LMI_VCPU_CACHE_40BIT_BAR, addr >> 8); + + addr &= 0xff; size = RADEON_GPU_PAGE_ALIGN(rdev->vce_fw->size); WREG32(VCE_VCPU_CACHE_OFFSET0, addr & 0x7fffffff); WREG32(VCE_VCPU_CACHE_SIZE0, size); diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index 1096da3..75c6d21 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -659,7 +659,7 @@ static irqreturn_t bma180_trigger_handler(int irq, void *p) mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = bma180_get_data_reg(data, bit); if (ret < 0) { diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index 066d0c0..75567fd 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -168,14 +168,14 @@ static const struct { int val; int val2; u8 bw_bits; -} bmc150_accel_samp_freq_table[] = { {7, 810000, 0x08}, - {15, 630000, 0x09}, - {31, 250000, 0x0A}, - {62, 500000, 0x0B}, - {125, 0, 0x0C}, - {250, 0, 0x0D}, - {500, 0, 0x0E}, - {1000, 0, 0x0F} }; +} bmc150_accel_samp_freq_table[] = { {15, 620000, 0x08}, + {31, 260000, 0x09}, + {62, 500000, 0x0A}, + {125, 0, 0x0B}, + {250, 0, 0x0C}, + {500, 0, 0x0D}, + {1000, 0, 0x0E}, + {2000, 0, 0x0F} }; static const struct { int bw_bits; @@ -840,7 +840,7 @@ static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev, } static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( - "7.810000 15.630000 31.250000 62.500000 125 250 500 1000"); + "15.620000 31.260000 62.50000 125 250 500 1000 2000"); static struct attribute *bmc150_accel_attributes[] = { &iio_const_attr_sampling_frequency_available.dev_attr.attr, @@ -986,7 +986,7 @@ static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p) int bit, ret, i = 0; mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = i2c_smbus_read_word_data(data->client, BMC150_ACCEL_AXIS_TO_REG(bit)); diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 567de26..1a63795 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -956,7 +956,7 @@ static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p) mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = kxcjk1013_get_acc_reg(data, bit); if (ret < 0) { diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 202daf8..46379b1 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -137,7 +137,8 @@ config AXP288_ADC config CC10001_ADC tristate "Cosmic Circuits 10001 ADC driver" - depends on HAS_IOMEM || HAVE_CLK || REGULATOR + depends on HAVE_CLK || REGULATOR + depends on HAS_IOMEM select IIO_BUFFER select IIO_TRIGGERED_BUFFER help diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index ff61ae5..8a0eb4a 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -544,7 +544,6 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) { struct iio_dev *idev = iio_trigger_get_drvdata(trig); struct at91_adc_state *st = iio_priv(idev); - struct iio_buffer *buffer = idev->buffer; struct at91_adc_reg_desc *reg = st->registers; u32 status = at91_adc_readl(st, reg->trigger_register); int value; @@ -564,7 +563,7 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) at91_adc_writel(st, reg->trigger_register, status | value); - for_each_set_bit(bit, buffer->scan_mask, + for_each_set_bit(bit, idev->active_scan_mask, st->num_channels) { struct iio_chan_spec const *chan = idev->channels + bit; at91_adc_writel(st, AT91_ADC_CHER, @@ -579,7 +578,7 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) at91_adc_writel(st, reg->trigger_register, status & ~value); - for_each_set_bit(bit, buffer->scan_mask, + for_each_set_bit(bit, idev->active_scan_mask, st->num_channels) { struct iio_chan_spec const *chan = idev->channels + bit; at91_adc_writel(st, AT91_ADC_CHDR, diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 2e5cc44..a0e7161 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -188,12 +188,11 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev) static int tiadc_buffer_postenable(struct iio_dev *indio_dev) { struct tiadc_device *adc_dev = iio_priv(indio_dev); - struct iio_buffer *buffer = indio_dev->buffer; unsigned int enb = 0; u8 bit; tiadc_step_config(indio_dev); - for_each_set_bit(bit, buffer->scan_mask, adc_dev->channels) + for_each_set_bit(bit, indio_dev->active_scan_mask, adc_dev->channels) enb |= (get_adc_step_bit(adc_dev, bit) << 1); adc_dev->buffer_en_ch_steps = enb; diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c index 8ec353c..e63b8e7 100644 --- a/drivers/iio/adc/vf610_adc.c +++ b/drivers/iio/adc/vf610_adc.c @@ -141,9 +141,13 @@ struct vf610_adc { struct regulator *vref; struct vf610_adc_feature adc_feature; + u32 sample_freq_avail[5]; + struct completion completion; }; +static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 }; + #define VF610_ADC_CHAN(_idx, _chan_type) { \ .type = (_chan_type), \ .indexed = 1, \ @@ -180,35 +184,47 @@ static const struct iio_chan_spec vf610_adc_iio_channels[] = { /* sentinel */ }; -/* - * ADC sample frequency, unit is ADCK cycles. - * ADC clk source is ipg clock, which is the same as bus clock. - * - * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder) - * SFCAdder: fixed to 6 ADCK cycles - * AverageNum: 1, 4, 8, 16, 32 samples for hardware average. - * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode - * LSTAdder(Long Sample Time): fixed to 3 ADCK cycles - * - * By default, enable 12 bit resolution mode, clock source - * set to ipg clock, So get below frequency group: - */ -static const u32 vf610_sample_freq_avail[5] = -{1941176, 559332, 286957, 145374, 73171}; +static inline void vf610_adc_calculate_rates(struct vf610_adc *info) +{ + unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk); + int i; + + /* + * Calculate ADC sample frequencies + * Sample time unit is ADCK cycles. ADCK clk source is ipg clock, + * which is the same as bus clock. + * + * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder) + * SFCAdder: fixed to 6 ADCK cycles + * AverageNum: 1, 4, 8, 16, 32 samples for hardware average. + * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode + * LSTAdder(Long Sample Time): fixed to 3 ADCK cycles + */ + adck_rate = ipg_rate / info->adc_feature.clk_div; + for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++) + info->sample_freq_avail[i] = + adck_rate / (6 + vf610_hw_avgs[i] * (25 + 3)); +} static inline void vf610_adc_cfg_init(struct vf610_adc *info) { + struct vf610_adc_feature *adc_feature = &info->adc_feature; + /* set default Configuration for ADC controller */ - info->adc_feature.clk_sel = VF610_ADCIOC_BUSCLK_SET; - info->adc_feature.vol_ref = VF610_ADCIOC_VR_VREF_SET; + adc_feature->clk_sel = VF610_ADCIOC_BUSCLK_SET; + adc_feature->vol_ref = VF610_ADCIOC_VR_VREF_SET; + + adc_feature->calibration = true; + adc_feature->ovwren = true; + + adc_feature->res_mode = 12; + adc_feature->sample_rate = 1; + adc_feature->lpm = true; - info->adc_feature.calibration = true; - info->adc_feature.ovwren = true; + /* Use a save ADCK which is below 20MHz on all devices */ + adc_feature->clk_div = 8; - info->adc_feature.clk_div = 1; - info->adc_feature.res_mode = 12; - info->adc_feature.sample_rate = 1; - info->adc_feature.lpm = true; + vf610_adc_calculate_rates(info); } static void vf610_adc_cfg_post_set(struct vf610_adc *info) @@ -290,12 +306,10 @@ static void vf610_adc_cfg_set(struct vf610_adc *info) cfg_data = readl(info->regs + VF610_REG_ADC_CFG); - /* low power configuration */ cfg_data &= ~VF610_ADC_ADLPC_EN; if (adc_feature->lpm) cfg_data |= VF610_ADC_ADLPC_EN; - /* disable high speed */ cfg_data &= ~VF610_ADC_ADHSC_EN; writel(cfg_data, info->regs + VF610_REG_ADC_CFG); @@ -435,10 +449,27 @@ static irqreturn_t vf610_adc_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1941176, 559332, 286957, 145374, 73171"); +static ssize_t vf610_show_samp_freq_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vf610_adc *info = iio_priv(dev_to_iio_dev(dev)); + size_t len = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(info->sample_freq_avail); i++) + len += scnprintf(buf + len, PAGE_SIZE - len, + "%u ", info->sample_freq_avail[i]); + + /* replace trailing space by newline */ + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(vf610_show_samp_freq_avail); static struct attribute *vf610_attributes[] = { - &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, NULL }; @@ -502,7 +533,7 @@ static int vf610_read_raw(struct iio_dev *indio_dev, return IIO_VAL_FRACTIONAL_LOG2; case IIO_CHAN_INFO_SAMP_FREQ: - *val = vf610_sample_freq_avail[info->adc_feature.sample_rate]; + *val = info->sample_freq_avail[info->adc_feature.sample_rate]; *val2 = 0; return IIO_VAL_INT; @@ -525,9 +556,9 @@ static int vf610_write_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: for (i = 0; - i < ARRAY_SIZE(vf610_sample_freq_avail); + i < ARRAY_SIZE(info->sample_freq_avail); i++) - if (val == vf610_sample_freq_avail[i]) { + if (val == info->sample_freq_avail[i]) { info->adc_feature.sample_rate = i; vf610_adc_sample_set(info); return 0; diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c index 60451b3..ccf3ea7 100644 --- a/drivers/iio/gyro/bmg160.c +++ b/drivers/iio/gyro/bmg160.c @@ -822,7 +822,7 @@ static irqreturn_t bmg160_trigger_handler(int irq, void *p) int bit, ret, i = 0; mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = i2c_smbus_read_word_data(data->client, BMG160_AXIS_TO_REG(bit)); diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c index e0017c2..f53e9a8 100644 --- a/drivers/iio/imu/adis_trigger.c +++ b/drivers/iio/imu/adis_trigger.c @@ -60,7 +60,7 @@ int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev) iio_trigger_set_drvdata(adis->trig, adis); ret = iio_trigger_register(adis->trig); - indio_dev->trig = adis->trig; + indio_dev->trig = iio_trigger_get(adis->trig); if (ret) goto error_free_irq; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index d8d5bed..ef76afe 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -410,42 +410,46 @@ error_read_raw: } } -static int inv_mpu6050_write_fsr(struct inv_mpu6050_state *st, int fsr) +static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val) { - int result; + int result, i; u8 d; - if (fsr < 0 || fsr > INV_MPU6050_MAX_GYRO_FS_PARAM) - return -EINVAL; - if (fsr == st->chip_config.fsr) - return 0; + for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) { + if (gyro_scale_6050[i] == val) { + d = (i << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, + st->reg->gyro_config, d); + if (result) + return result; - d = (fsr << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d); - if (result) - return result; - st->chip_config.fsr = fsr; + st->chip_config.fsr = i; + return 0; + } + } - return 0; + return -EINVAL; } -static int inv_mpu6050_write_accel_fs(struct inv_mpu6050_state *st, int fs) +static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val) { - int result; + int result, i; u8 d; - if (fs < 0 || fs > INV_MPU6050_MAX_ACCL_FS_PARAM) - return -EINVAL; - if (fs == st->chip_config.accl_fs) - return 0; + for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) { + if (accel_scale[i] == val) { + d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, + st->reg->accl_config, d); + if (result) + return result; - d = (fs << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, st->reg->accl_config, d); - if (result) - return result; - st->chip_config.accl_fs = fs; + st->chip_config.accl_fs = i; + return 0; + } + } - return 0; + return -EINVAL; } static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, @@ -471,10 +475,10 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_ANGL_VEL: - result = inv_mpu6050_write_fsr(st, val); + result = inv_mpu6050_write_gyro_scale(st, val2); break; case IIO_ACCEL: - result = inv_mpu6050_write_accel_fs(st, val); + result = inv_mpu6050_write_accel_scale(st, val2); break; default: result = -EINVAL; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index 0cd306a..ba27e27 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -24,6 +24,16 @@ #include <linux/poll.h> #include "inv_mpu_iio.h" +static void inv_clear_kfifo(struct inv_mpu6050_state *st) +{ + unsigned long flags; + + /* take the spin lock sem to avoid interrupt kick in */ + spin_lock_irqsave(&st->time_stamp_lock, flags); + kfifo_reset(&st->timestamps); + spin_unlock_irqrestore(&st->time_stamp_lock, flags); +} + int inv_reset_fifo(struct iio_dev *indio_dev) { int result; @@ -50,6 +60,10 @@ int inv_reset_fifo(struct iio_dev *indio_dev) INV_MPU6050_BIT_FIFO_RST); if (result) goto reset_fifo_fail; + + /* clear timestamps fifo */ + inv_clear_kfifo(st); + /* enable interrupt */ if (st->chip_config.accl_fifo_enable || st->chip_config.gyro_fifo_enable) { @@ -83,16 +97,6 @@ reset_fifo_fail: return result; } -static void inv_clear_kfifo(struct inv_mpu6050_state *st) -{ - unsigned long flags; - - /* take the spin lock sem to avoid interrupt kick in */ - spin_lock_irqsave(&st->time_stamp_lock, flags); - kfifo_reset(&st->timestamps); - spin_unlock_irqrestore(&st->time_stamp_lock, flags); -} - /** * inv_mpu6050_irq_handler() - Cache a timestamp at each data ready interrupt. */ @@ -184,7 +188,6 @@ end_session: flush_fifo: /* Flush HW and SW FIFOs. */ inv_reset_fifo(indio_dev); - inv_clear_kfifo(st); mutex_unlock(&indio_dev->mlock); iio_trigger_notify_done(indio_dev->trig); diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c index 5cc3692..b3a3637 100644 --- a/drivers/iio/imu/kmx61.c +++ b/drivers/iio/imu/kmx61.c @@ -1227,7 +1227,7 @@ static irqreturn_t kmx61_trigger_handler(int irq, void *p) base = KMX61_MAG_XOUT_L; mutex_lock(&data->lock); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = kmx61_read_measurement(data, base, bit); if (ret < 0) { diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index aaba9d3..4df97f6 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -847,8 +847,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev, * @attr_list: List of IIO device attributes * * This function frees the memory allocated for each of the IIO device - * attributes in the list. Note: if you want to reuse the list after calling - * this function you have to reinitialize it using INIT_LIST_HEAD(). + * attributes in the list. */ void iio_free_chan_devattr_list(struct list_head *attr_list) { @@ -856,6 +855,7 @@ void iio_free_chan_devattr_list(struct list_head *attr_list) list_for_each_entry_safe(p, n, attr_list, l) { kfree(p->dev_attr.attr.name); + list_del(&p->l); kfree(p); } } @@ -936,6 +936,7 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev) iio_free_chan_devattr_list(&indio_dev->channel_attr_list); kfree(indio_dev->chan_attr_group.attrs); + indio_dev->chan_attr_group.attrs = NULL; } static void iio_dev_release(struct device *device) diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c index a4b3970..a99692b 100644 --- a/drivers/iio/industrialio-event.c +++ b/drivers/iio/industrialio-event.c @@ -500,6 +500,7 @@ int iio_device_register_eventset(struct iio_dev *indio_dev) error_free_setup_event_lines: iio_free_chan_devattr_list(&indio_dev->event_interface->dev_attr_list); kfree(indio_dev->event_interface); + indio_dev->event_interface = NULL; return ret; } diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c index 74dff4e..89fca3a 100644 --- a/drivers/iio/proximity/sx9500.c +++ b/drivers/iio/proximity/sx9500.c @@ -494,7 +494,7 @@ static irqreturn_t sx9500_trigger_handler(int irq, void *private) mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = sx9500_read_proximity(data, &indio_dev->channels[bit], &val); diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c index aec7a6a..8c014b5 100644 --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -99,6 +99,14 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr, if (dmasync) dma_set_attr(DMA_ATTR_WRITE_BARRIER, &attrs); + /* + * If the combination of the addr and size requested for this memory + * region causes an integer overflow, return error. + */ + if ((PAGE_ALIGN(addr + size) <= size) || + (PAGE_ALIGN(addr + size) <= addr)) + return ERR_PTR(-EINVAL); + if (!can_do_mlock()) return ERR_PTR(-EPERM); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 1bd15eb..27bcdbc 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -1154,10 +1154,28 @@ out: mutex_unlock(&alps_mutex); } -static void alps_report_bare_ps2_packet(struct input_dev *dev, +static void alps_report_bare_ps2_packet(struct psmouse *psmouse, unsigned char packet[], bool report_buttons) { + struct alps_data *priv = psmouse->private; + struct input_dev *dev; + + /* Figure out which device to use to report the bare packet */ + if (priv->proto_version == ALPS_PROTO_V2 && + (priv->flags & ALPS_DUALPOINT)) { + /* On V2 devices the DualPoint Stick reports bare packets */ + dev = priv->dev2; + } else if (unlikely(IS_ERR_OR_NULL(priv->dev3))) { + /* Register dev3 mouse if we received PS/2 packet first time */ + if (!IS_ERR(priv->dev3)) + psmouse_queue_work(psmouse, &priv->dev3_register_work, + 0); + return; + } else { + dev = priv->dev3; + } + if (report_buttons) alps_report_buttons(dev, NULL, packet[0] & 1, packet[0] & 2, packet[0] & 4); @@ -1232,8 +1250,8 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) * de-synchronization. */ - alps_report_bare_ps2_packet(priv->dev2, - &psmouse->packet[3], false); + alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3], + false); /* * Continue with the standard ALPS protocol handling, @@ -1289,18 +1307,9 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) * properly we only do this if the device is fully synchronized. */ if (!psmouse->out_of_sync_cnt && (psmouse->packet[0] & 0xc8) == 0x08) { - - /* Register dev3 mouse if we received PS/2 packet first time */ - if (unlikely(!priv->dev3)) - psmouse_queue_work(psmouse, - &priv->dev3_register_work, 0); - if (psmouse->pktcnt == 3) { - /* Once dev3 mouse device is registered report data */ - if (likely(!IS_ERR_OR_NULL(priv->dev3))) - alps_report_bare_ps2_packet(priv->dev3, - psmouse->packet, - true); + alps_report_bare_ps2_packet(psmouse, psmouse->packet, + true); return PSMOUSE_FULL_PACKET; } return PSMOUSE_GOOD_DATA; @@ -2281,10 +2290,12 @@ static int alps_set_protocol(struct psmouse *psmouse, priv->set_abs_params = alps_set_abs_params_mt; priv->nibble_commands = alps_v3_nibble_commands; priv->addr_command = PSMOUSE_CMD_RESET_WRAP; - priv->x_max = 1360; - priv->y_max = 660; priv->x_bits = 23; priv->y_bits = 12; + + if (alps_dolphin_get_device_area(psmouse, priv)) + return -EIO; + break; case ALPS_PROTO_V6: @@ -2303,9 +2314,8 @@ static int alps_set_protocol(struct psmouse *psmouse, priv->set_abs_params = alps_set_abs_params_mt; priv->nibble_commands = alps_v3_nibble_commands; priv->addr_command = PSMOUSE_CMD_RESET_WRAP; - - if (alps_dolphin_get_device_area(psmouse, priv)) - return -EIO; + priv->x_max = 0xfff; + priv->y_max = 0x7ff; if (priv->fw_ver[1] != 0xba) priv->flags |= ALPS_BUTTONPAD; diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index dda6058..3b06c8a 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -154,6 +154,11 @@ static const struct min_max_quirk min_max_pnpid_table[] = { }, { (const char * const []){"LEN2006", NULL}, + {2691, 2691}, + 1024, 5045, 2457, 4832 + }, + { + (const char * const []){"LEN2006", NULL}, {ANY_BOARD_ID, ANY_BOARD_ID}, 1264, 5675, 1171, 4688 }, @@ -189,7 +194,7 @@ static const char * const topbuttonpad_pnp_ids[] = { "LEN2003", "LEN2004", /* L440 */ "LEN2005", - "LEN2006", + "LEN2006", /* Edge E440/E540 */ "LEN2007", "LEN2008", "LEN2009", diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 596b0a9..9687f8a 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -169,7 +169,7 @@ static void its_encode_cmd(struct its_cmd_block *cmd, u8 cmd_nr) static void its_encode_devid(struct its_cmd_block *cmd, u32 devid) { - cmd->raw_cmd[0] &= ~(0xffffUL << 32); + cmd->raw_cmd[0] &= BIT_ULL(32) - 1; cmd->raw_cmd[0] |= ((u64)devid) << 32; } @@ -802,6 +802,7 @@ static int its_alloc_tables(struct its_node *its) int i; int psz = SZ_64K; u64 shr = GITS_BASER_InnerShareable; + u64 cache = GITS_BASER_WaWb; for (i = 0; i < GITS_BASER_NR_REGS; i++) { u64 val = readq_relaxed(its->base + GITS_BASER + i * 8); @@ -848,7 +849,7 @@ retry_baser: val = (virt_to_phys(base) | (type << GITS_BASER_TYPE_SHIFT) | ((entry_size - 1) << GITS_BASER_ENTRY_SIZE_SHIFT) | - GITS_BASER_WaWb | + cache | shr | GITS_BASER_VALID); @@ -874,9 +875,12 @@ retry_baser: * Shareability didn't stick. Just use * whatever the read reported, which is likely * to be the only thing this redistributor - * supports. + * supports. If that's zero, make it + * non-cacheable as well. */ shr = tmp & GITS_BASER_SHAREABILITY_MASK; + if (!shr) + cache = GITS_BASER_nC; goto retry_baser; } @@ -980,16 +984,39 @@ static void its_cpu_init_lpis(void) tmp = readq_relaxed(rbase + GICR_PROPBASER); if ((tmp ^ val) & GICR_PROPBASER_SHAREABILITY_MASK) { + if (!(tmp & GICR_PROPBASER_SHAREABILITY_MASK)) { + /* + * The HW reports non-shareable, we must + * remove the cacheability attributes as + * well. + */ + val &= ~(GICR_PROPBASER_SHAREABILITY_MASK | + GICR_PROPBASER_CACHEABILITY_MASK); + val |= GICR_PROPBASER_nC; + writeq_relaxed(val, rbase + GICR_PROPBASER); + } pr_info_once("GIC: using cache flushing for LPI property table\n"); gic_rdists->flags |= RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING; } /* set PENDBASE */ val = (page_to_phys(pend_page) | - GICR_PROPBASER_InnerShareable | - GICR_PROPBASER_WaWb); + GICR_PENDBASER_InnerShareable | + GICR_PENDBASER_WaWb); writeq_relaxed(val, rbase + GICR_PENDBASER); + tmp = readq_relaxed(rbase + GICR_PENDBASER); + + if (!(tmp & GICR_PENDBASER_SHAREABILITY_MASK)) { + /* + * The HW reports non-shareable, we must remove the + * cacheability attributes as well. + */ + val &= ~(GICR_PENDBASER_SHAREABILITY_MASK | + GICR_PENDBASER_CACHEABILITY_MASK); + val |= GICR_PENDBASER_nC; + writeq_relaxed(val, rbase + GICR_PENDBASER); + } /* Enable LPIs */ val = readl_relaxed(rbase + GICR_CTLR); @@ -1026,7 +1053,7 @@ static void its_cpu_init_collection(void) * This ITS wants a linear CPU number. */ target = readq_relaxed(gic_data_rdist_rd_base() + GICR_TYPER); - target = GICR_TYPER_CPU_NUMBER(target); + target = GICR_TYPER_CPU_NUMBER(target) << 16; } /* Perform collection mapping */ @@ -1422,14 +1449,26 @@ static int its_probe(struct device_node *node, struct irq_domain *parent) writeq_relaxed(baser, its->base + GITS_CBASER); tmp = readq_relaxed(its->base + GITS_CBASER); - writeq_relaxed(0, its->base + GITS_CWRITER); - writel_relaxed(GITS_CTLR_ENABLE, its->base + GITS_CTLR); - if ((tmp ^ baser) & GITS_BASER_SHAREABILITY_MASK) { + if ((tmp ^ baser) & GITS_CBASER_SHAREABILITY_MASK) { + if (!(tmp & GITS_CBASER_SHAREABILITY_MASK)) { + /* + * The HW reports non-shareable, we must + * remove the cacheability attributes as + * well. + */ + baser &= ~(GITS_CBASER_SHAREABILITY_MASK | + GITS_CBASER_CACHEABILITY_MASK); + baser |= GITS_CBASER_nC; + writeq_relaxed(baser, its->base + GITS_CBASER); + } pr_info("ITS: using cache flushing for cmd queue\n"); its->flags |= ITS_FLAGS_CMDQ_NEEDS_FLUSHING; } + writeq_relaxed(0, its->base + GITS_CWRITER); + writel_relaxed(GITS_CTLR_ENABLE, its->base + GITS_CTLR); + if (of_property_read_bool(its->msi_chip.of_node, "msi-controller")) { its->domain = irq_domain_add_tree(NULL, &its_domain_ops, its); if (!its->domain) { diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index a7a9271..ce5f7f9 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -2729,16 +2729,11 @@ static int mvneta_stop(struct net_device *dev) static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mvneta_port *pp = netdev_priv(dev); - int ret; if (!pp->phy_dev) return -ENOTSUPP; - ret = phy_mii_ioctl(pp->phy_dev, ifr, cmd); - if (!ret) - mvneta_adjust_link(dev); - - return ret; + return phy_mii_ioctl(pp->phy_dev, ifr, cmd); } /* Ethtool methods */ diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 06993ea..f0fbb4a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -725,7 +725,8 @@ static int mlx4_cmd_wait(struct mlx4_dev *dev, u64 in_param, u64 *out_param, * on the host, we deprecate the error message for this * specific command/input_mod/opcode_mod/fw-status to be debug. */ - if (op == MLX4_CMD_SET_PORT && in_modifier == 1 && + if (op == MLX4_CMD_SET_PORT && + (in_modifier == 1 || in_modifier == 2) && op_modifier == MLX4_SET_PORT_IB_OPCODE && context->fw_status == CMD_STAT_BAD_SIZE) mlx4_dbg(dev, "command 0x%x failed: fw status = 0x%x\n", diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index e9b960f..720aaf6 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1008,8 +1008,7 @@ err: static int xennet_change_mtu(struct net_device *dev, int mtu) { - int max = xennet_can_sg(dev) ? - XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER : ETH_DATA_LEN; + int max = xennet_can_sg(dev) ? XEN_NETIF_MAX_TX_SIZE : ETH_DATA_LEN; if (mtu > max) return -EINVAL; @@ -1279,8 +1278,6 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev) netdev->ethtool_ops = &xennet_ethtool_ops; SET_NETDEV_DEV(netdev, &dev->dev); - netif_set_gso_max_size(netdev, XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER); - np->netdev = netdev; netif_carrier_off(netdev); diff --git a/drivers/of/address.c b/drivers/of/address.c index ad29069..78a7dcb 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -450,12 +450,17 @@ static struct of_bus *of_match_bus(struct device_node *np) return NULL; } -static int of_empty_ranges_quirk(void) +static int of_empty_ranges_quirk(struct device_node *np) { if (IS_ENABLED(CONFIG_PPC)) { - /* To save cycles, we cache the result */ + /* To save cycles, we cache the result for global "Mac" setting */ static int quirk_state = -1; + /* PA-SEMI sdc DT bug */ + if (of_device_is_compatible(np, "1682m-sdc")) + return true; + + /* Make quirk cached */ if (quirk_state < 0) quirk_state = of_machine_is_compatible("Power Macintosh") || @@ -490,7 +495,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus, * This code is only enabled on powerpc. --gcl */ ranges = of_get_property(parent, rprop, &rlen); - if (ranges == NULL && !of_empty_ranges_quirk()) { + if (ranges == NULL && !of_empty_ranges_quirk(parent)) { pr_debug("OF: no ranges; cannot translate\n"); return 1; } diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index 2418302..6d5b38d 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -38,6 +38,7 @@ config IIO_SIMPLE_DUMMY_EVENTS config IIO_SIMPLE_DUMMY_BUFFER bool "Buffered capture support" select IIO_BUFFER + select IIO_TRIGGER select IIO_KFIFO_BUF help Add buffered data capture to the simple dummy driver. diff --git a/drivers/staging/iio/magnetometer/hmc5843_core.c b/drivers/staging/iio/magnetometer/hmc5843_core.c index fd171d8..90cc18b 100644 --- a/drivers/staging/iio/magnetometer/hmc5843_core.c +++ b/drivers/staging/iio/magnetometer/hmc5843_core.c @@ -592,6 +592,7 @@ int hmc5843_common_probe(struct device *dev, struct regmap *regmap, mutex_init(&data->lock); indio_dev->dev.parent = dev; + indio_dev->name = dev->driver->name; indio_dev->info = &hmc5843_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = data->variant->channels; diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index b1893f3..3ad1458 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -921,6 +921,9 @@ static void lpuart_setup_watermark(struct lpuart_port *sport) writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE, sport->port.membase + UARTPFIFO); + /* explicitly clear RDRF */ + readb(sport->port.membase + UARTSR1); + /* flush Tx and Rx FIFO */ writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH, sport->port.membase + UARTCFIFO); @@ -1076,6 +1079,8 @@ static int lpuart_startup(struct uart_port *port) sport->txfifo_size = 0x1 << (((temp >> UARTPFIFO_TXSIZE_OFF) & UARTPFIFO_FIFOSIZE_MASK) + 1); + sport->port.fifosize = sport->txfifo_size; + sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) & UARTPFIFO_FIFOSIZE_MASK) + 1); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index af821a9..cf08876 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -963,6 +963,7 @@ static void s3c24xx_serial_shutdown(struct uart_port *port) free_irq(ourport->tx_irq, ourport); tx_enabled(port) = 0; ourport->tx_claimed = 0; + ourport->tx_mode = 0; } if (ourport->rx_claimed) { diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index a7865c4..0827d7c 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -387,6 +387,10 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, status = PORT_PLC; port_change_bit = "link state"; break; + case USB_PORT_FEAT_C_PORT_CONFIG_ERROR: + status = PORT_CEC; + port_change_bit = "config error"; + break; default: /* Should never happen */ return; @@ -588,6 +592,8 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_LINK_STATE << 16; if ((raw_port_status & PORT_WRC)) status |= USB_PORT_STAT_C_BH_RESET << 16; + if ((raw_port_status & PORT_CEC)) + status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; } if (hcd->speed != HCD_USB3) { @@ -1005,6 +1011,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_C_OVER_CURRENT: case USB_PORT_FEAT_C_ENABLE: case USB_PORT_FEAT_C_PORT_LINK_STATE: + case USB_PORT_FEAT_C_PORT_CONFIG_ERROR: xhci_clear_port_change_bit(xhci, wValue, wIndex, port_array[wIndex], temp); break; @@ -1069,7 +1076,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) */ status = bus_state->resuming_ports; - mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC; + mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC; spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index fd53c9e..2af32e2 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -115,6 +115,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_INTEL) { xhci->quirks |= XHCI_LPM_SUPPORT; xhci->quirks |= XHCI_INTEL_HOST; + xhci->quirks |= XHCI_AVOID_BEI; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { @@ -130,7 +131,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) * PPT chipsets. */ xhci->quirks |= XHCI_SPURIOUS_REBOOT; - xhci->quirks |= XHCI_AVOID_BEI; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) { diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c index f32c292..3fc4fe7 100644 --- a/drivers/usb/isp1760/isp1760-udc.c +++ b/drivers/usb/isp1760/isp1760-udc.c @@ -1203,7 +1203,7 @@ static int isp1760_udc_start(struct usb_gadget *gadget, if (udc->driver) { dev_err(udc->isp->dev, "UDC already has a gadget driver\n"); - spin_unlock(&udc->lock); + spin_unlock_irqrestore(&udc->lock, flags); return -EBUSY; } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 3086dec..8eb68a3 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -604,6 +604,7 @@ static const struct usb_device_id id_table_combined[] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) }, /* * ELV devices: */ @@ -1883,8 +1884,12 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial) { struct usb_device *udev = serial->dev; - if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) || - (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2"))) + if (udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) + return ftdi_jtag_probe(serial); + + if (udev->product && + (!strcmp(udev->product, "BeagleBone/XDS100V2") || + !strcmp(udev->product, "SNAP Connect E10"))) return ftdi_jtag_probe(serial); return 0; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 56b1b55..4e4f46f 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -561,6 +561,12 @@ */ #define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */ +/* + * Synapse Wireless product ids (FTDI_VID) + * http://www.synapse-wireless.com + */ +#define FTDI_SYNAPSE_SS200_PID 0x9090 /* SS200 - SNAP Stick 200 */ + /********************************/ /** third-party VID/PID combos **/ diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index dd97d8b..4f7e072 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -61,6 +61,7 @@ struct keyspan_pda_private { /* For Xircom PGSDB9 and older Entrega version of the same device */ #define XIRCOM_VENDOR_ID 0x085a #define XIRCOM_FAKE_ID 0x8027 +#define XIRCOM_FAKE_ID_2 0x8025 /* "PGMFHUB" serial */ #define ENTREGA_VENDOR_ID 0x1645 #define ENTREGA_FAKE_ID 0x8093 @@ -70,6 +71,7 @@ static const struct usb_device_id id_table_combined[] = { #endif #ifdef XIRCOM { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, + { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) }, { USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) }, #endif { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) }, @@ -93,6 +95,7 @@ static const struct usb_device_id id_table_fake[] = { #ifdef XIRCOM static const struct usb_device_id id_table_fake_xircom[] = { { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, + { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) }, { USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) }, { } }; diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index b812462..94d9680 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -55,6 +55,23 @@ config XEN_BALLOON_MEMORY_HOTPLUG In that case step 3 should be omitted. +config XEN_BALLOON_MEMORY_HOTPLUG_LIMIT + int "Hotplugged memory limit (in GiB) for a PV guest" + default 512 if X86_64 + default 4 if X86_32 + range 0 64 if X86_32 + depends on XEN_HAVE_PVMMU + depends on XEN_BALLOON_MEMORY_HOTPLUG + help + Maxmium amount of memory (in GiB) that a PV guest can be + expanded to when using memory hotplug. + + A PV guest can have more memory than this limit if is + started with a larger maximum. + + This value is used to allocate enough space in internal + tables needed for physical memory administration. + config XEN_SCRUB_PAGES bool "Scrub pages before returning them to system" depends on XEN_BALLOON diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 0b52d92..fd93369 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -229,6 +229,29 @@ static enum bp_state reserve_additional_memory(long credit) balloon_hotplug = round_up(balloon_hotplug, PAGES_PER_SECTION); nid = memory_add_physaddr_to_nid(hotplug_start_paddr); +#ifdef CONFIG_XEN_HAVE_PVMMU + /* + * add_memory() will build page tables for the new memory so + * the p2m must contain invalid entries so the correct + * non-present PTEs will be written. + * + * If a failure occurs, the original (identity) p2m entries + * are not restored since this region is now known not to + * conflict with any devices. + */ + if (!xen_feature(XENFEAT_auto_translated_physmap)) { + unsigned long pfn, i; + + pfn = PFN_DOWN(hotplug_start_paddr); + for (i = 0; i < balloon_hotplug; i++) { + if (!set_phys_to_machine(pfn + i, INVALID_P2M_ENTRY)) { + pr_warn("set_phys_to_machine() failed, no memory added\n"); + return BP_ECANCELED; + } + } + } +#endif + rc = add_memory(nid, hotplug_start_paddr, balloon_hotplug << PAGE_SHIFT); if (rc) { |
