summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/md/dm-stripe.c8
-rw-r--r--drivers/media/video/cx88/Kconfig28
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c3
-rw-r--r--drivers/net/chelsio/sge.c6
-rw-r--r--drivers/net/e100.c5
-rw-r--r--drivers/net/e1000/e1000_main.c8
-rw-r--r--drivers/net/tg3.c52
-rw-r--r--drivers/net/tg3.h1
8 files changed, 79 insertions, 32 deletions
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index ab89278..697aaca 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -103,9 +103,15 @@ static int stripe_ctr(struct dm_target *ti, unsigned int argc, char **argv)
return -EINVAL;
}
+ if (((uint32_t)ti->len) & (chunk_size - 1)) {
+ ti->error = "dm-stripe: Target length not divisible by "
+ "chunk size";
+ return -EINVAL;
+ }
+
width = ti->len;
if (sector_div(width, stripes)) {
- ti->error = "dm-stripe: Target length not divisable by "
+ ti->error = "dm-stripe: Target length not divisible by "
"number of stripes";
return -EINVAL;
}
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index e99dfbb..87d79df 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -15,20 +15,6 @@ config VIDEO_CX88
To compile this driver as a module, choose M here: the
module will be called cx8800
-config VIDEO_CX88_DVB
- tristate "DVB/ATSC Support for cx2388x based TV cards"
- depends on VIDEO_CX88 && DVB_CORE
- select VIDEO_BUF_DVB
- ---help---
- This adds support for DVB/ATSC cards based on the
- Connexant 2388x chip.
-
- To compile this driver as a module, choose M here: the
- module will be called cx88-dvb.
-
- You must also select one or more DVB/ATSC demodulators.
- If you are unsure which you need, choose all of them.
-
config VIDEO_CX88_ALSA
tristate "ALSA DMA audio support"
depends on VIDEO_CX88 && SND && EXPERIMENTAL
@@ -44,6 +30,20 @@ config VIDEO_CX88_ALSA
To compile this driver as a module, choose M here: the
module will be called cx88-alsa.
+config VIDEO_CX88_DVB
+ tristate "DVB/ATSC Support for cx2388x based TV cards"
+ depends on VIDEO_CX88 && DVB_CORE
+ select VIDEO_BUF_DVB
+ ---help---
+ This adds support for DVB/ATSC cards based on the
+ Connexant 2388x chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cx88-dvb.
+
+ You must also select one or more DVB/ATSC demodulators.
+ If you are unsure which you need, choose all of them.
+
config VIDEO_CX88_DVB_ALL_FRONTENDS
bool "Build all supported frontends for cx2388x based TV cards"
default y
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 94a14a2..5b26780 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -367,6 +367,9 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
em28xx_capture_start(dev, 1);
em28xx_resolution_set(dev);
+ /* device needs to be initialized before isoc transfer */
+ video_mux(dev, 0);
+
/* start the transfer */
errCode = em28xx_init_isoc(dev);
if (errCode)
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 2c5b849..30ff8ea 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1021,7 +1021,7 @@ static void restart_tx_queues(struct sge *sge)
if (test_and_clear_bit(nd->if_port,
&sge->stopped_tx_queues) &&
netif_running(nd)) {
- sge->stats.cmdQ_restarted[3]++;
+ sge->stats.cmdQ_restarted[2]++;
netif_wake_queue(nd);
}
}
@@ -1350,7 +1350,7 @@ static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
if (unlikely(credits < count)) {
netif_stop_queue(dev);
set_bit(dev->if_port, &sge->stopped_tx_queues);
- sge->stats.cmdQ_full[3]++;
+ sge->stats.cmdQ_full[2]++;
spin_unlock(&q->lock);
if (!netif_queue_stopped(dev))
CH_ERR("%s: Tx ring full while queue awake!\n",
@@ -1358,7 +1358,7 @@ static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
return NETDEV_TX_BUSY;
}
if (unlikely(credits - count < q->stop_thres)) {
- sge->stats.cmdQ_full[3]++;
+ sge->stats.cmdQ_full[2]++;
netif_stop_queue(dev);
set_bit(dev->if_port, &sge->stopped_tx_queues);
}
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index ed13f72..31ac001 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2154,6 +2154,9 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
msleep(10);
+ pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+
if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
skb->data, ETH_DATA_LEN))
err = -EAGAIN;
@@ -2161,8 +2164,8 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
err_loopback_none:
mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
nic->loopback = lb_none;
- e100_hw_init(nic);
e100_clean_cbs(nic);
+ e100_hw_reset(nic);
err_clean_rx:
e100_rx_clean_list(nic);
return err;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4400117..f39de16 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3600,7 +3600,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
e1000_rx_checksum(adapter,
(uint32_t)(status) |
((uint32_t)(rx_desc->errors) << 24),
- rx_desc->csum, skb);
+ le16_to_cpu(rx_desc->csum), skb);
skb->protocol = eth_type_trans(skb, netdev);
#ifdef CONFIG_E1000_NAPI
@@ -3773,11 +3773,11 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
copydone:
e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
skb->protocol = eth_type_trans(skb, netdev);
if (likely(rx_desc->wb.upper.header_status &
- E1000_RXDPS_HDRSTAT_HDRSP))
+ cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
adapter->rx_hdr_split++;
#ifdef CONFIG_E1000_NAPI
if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
@@ -3799,7 +3799,7 @@ copydone:
netdev->last_rx = jiffies;
next_desc:
- rx_desc->wb.middle.status_error &= ~0xFF;
+ rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
buffer_info->skb = NULL;
/* return some buffers to hardware, one at a time is too slow */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index c0878f3..bd49b25 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9552,12 +9552,36 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
}
}
- /* Find msi capability. */
+ /* The EPB bridge inside 5714, 5715, and 5780 cannot support
+ * DMA addresses > 40-bit. This bridge may have other additional
+ * 57xx devices behind it in some 4-port NIC designs for example.
+ * Any tg3 device found behind the bridge will also need the 40-bit
+ * DMA workaround.
+ */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
+ tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
}
+ else {
+ struct pci_dev *bridge = NULL;
+
+ do {
+ bridge = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_EPB,
+ bridge);
+ if (bridge && bridge->subordinate &&
+ (bridge->subordinate->number <=
+ tp->pdev->bus->number) &&
+ (bridge->subordinate->subordinate >=
+ tp->pdev->bus->number)) {
+ tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
+ pci_dev_put(bridge);
+ break;
+ }
+ } while (bridge);
+ }
/* Initialize misc host control in PCI block. */
tp->misc_host_ctrl |= (misc_ctrl_reg &
@@ -10303,7 +10327,14 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f);
- if (ccval == 0x6 || ccval == 0x7)
+ /* If the 5704 is behind the EPB bridge, we can
+ * do the less restrictive ONE_DMA workaround for
+ * better performance.
+ */
+ if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
+ tp->dma_rwctrl |= 0x8000;
+ else if (ccval == 0x6 || ccval == 0x7)
tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
/* Set bit 23 to enable PCIX hw bug fix */
@@ -10759,19 +10790,20 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
goto err_out_iounmap;
}
- /* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit.
+ /* The EPB bridge inside 5714, 5715, and 5780 and any
+ * device behind the EPB cannot support DMA addresses > 40-bit.
* On 64-bit systems with IOMMU, use 40-bit dma_mask.
* On 64-bit systems without IOMMU, use 64-bit dma_mask and
* do DMA address check in tg3_start_xmit().
*/
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
+ if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+ persist_dma_mask = dma_mask = DMA_32BIT_MASK;
+ else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) {
persist_dma_mask = dma_mask = DMA_40BIT_MASK;
#ifdef CONFIG_HIGHMEM
dma_mask = DMA_64BIT_MASK;
#endif
- } else if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
- persist_dma_mask = dma_mask = DMA_32BIT_MASK;
- else
+ } else
persist_dma_mask = dma_mask = DMA_64BIT_MASK;
/* Configure DMA attributes. */
@@ -10908,8 +10940,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
(tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0,
(tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
- printk(KERN_INFO "%s: dma_rwctrl[%08x]\n",
- dev->name, tp->dma_rwctrl);
+ printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
+ dev->name, tp->dma_rwctrl,
+ (pdev->dma_mask == DMA_32BIT_MASK) ? 32 :
+ (((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64));
return 0;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 7f4b7f6..7e3b613 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2163,6 +2163,7 @@ struct tg3 {
#define TG3_FLAG_10_100_ONLY 0x01000000
#define TG3_FLAG_PAUSE_AUTONEG 0x02000000
#define TG3_FLAG_IN_RESET_TASK 0x04000000
+#define TG3_FLAG_40BIT_DMA_BUG 0x08000000
#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
#define TG3_FLAG_GOT_SERDES_FLOWCTL 0x20000000
#define TG3_FLAG_SPLIT_MODE 0x40000000
OpenPOWER on IntegriCloud