diff options
Diffstat (limited to 'drivers/vme/bridges')
| -rw-r--r-- | drivers/vme/bridges/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/vme/bridges/Makefile | 2 | ||||
| -rw-r--r-- | drivers/vme/bridges/vme_ca91cx42.c | 1959 | ||||
| -rw-r--r-- | drivers/vme/bridges/vme_ca91cx42.h | 583 | ||||
| -rw-r--r-- | drivers/vme/bridges/vme_tsi148.c | 2691 | ||||
| -rw-r--r-- | drivers/vme/bridges/vme_tsi148.h | 1410 |
6 files changed, 6660 insertions, 0 deletions
diff --git a/drivers/vme/bridges/Kconfig b/drivers/vme/bridges/Kconfig new file mode 100644 index 0000000..9331064 --- /dev/null +++ b/drivers/vme/bridges/Kconfig @@ -0,0 +1,15 @@ +comment "VME Bridge Drivers" + +config VME_CA91CX42 + tristate "Universe II" + depends on VIRT_TO_BUS + help + If you say Y here you get support for the Tundra CA91C142 + (Universe II) VME bridge chip. + +config VME_TSI148 + tristate "Tempe" + depends on VIRT_TO_BUS + help + If you say Y here you get support for the Tundra TSI148 VME bridge + chip. diff --git a/drivers/vme/bridges/Makefile b/drivers/vme/bridges/Makefile new file mode 100644 index 0000000..59638af --- /dev/null +++ b/drivers/vme/bridges/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_VME_CA91CX42) += vme_ca91cx42.o +obj-$(CONFIG_VME_TSI148) += vme_tsi148.o diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c new file mode 100644 index 0000000..a3c0f84e --- /dev/null +++ b/drivers/vme/bridges/vme_ca91cx42.c @@ -0,0 +1,1959 @@ +/* + * Support for the Tundra Universe I/II VME-PCI Bridge Chips + * + * Author: Martyn Welch <martyn.welch@ge.com> + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * Based on work by Tom Armistead and Ajit Prem + * Copyright 2004 Motorola Inc. + * + * Derived from ca91c042.c by Michael Wyrick + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/poll.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/vme.h> + +#include "../vme_bridge.h" +#include "vme_ca91cx42.h" + +static int __init ca91cx42_init(void); +static int ca91cx42_probe(struct pci_dev *, const struct pci_device_id *); +static void ca91cx42_remove(struct pci_dev *); +static void __exit ca91cx42_exit(void); + +/* Module parameters */ +static int geoid; + +static const char driver_name[] = "vme_ca91cx42"; + +static DEFINE_PCI_DEVICE_TABLE(ca91cx42_ids) = { + { PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_CA91C142) }, + { }, +}; + +static struct pci_driver ca91cx42_driver = { + .name = driver_name, + .id_table = ca91cx42_ids, + .probe = ca91cx42_probe, + .remove = ca91cx42_remove, +}; + +static u32 ca91cx42_DMA_irqhandler(struct ca91cx42_driver *bridge) +{ + wake_up(&bridge->dma_queue); + + return CA91CX42_LINT_DMA; +} + +static u32 ca91cx42_LM_irqhandler(struct ca91cx42_driver *bridge, u32 stat) +{ + int i; + u32 serviced = 0; + + for (i = 0; i < 4; i++) { + if (stat & CA91CX42_LINT_LM[i]) { + /* We only enable interrupts if the callback is set */ + bridge->lm_callback[i](i); + serviced |= CA91CX42_LINT_LM[i]; + } + } + + return serviced; +} + +/* XXX This needs to be split into 4 queues */ +static u32 ca91cx42_MB_irqhandler(struct ca91cx42_driver *bridge, int mbox_mask) +{ + wake_up(&bridge->mbox_queue); + + return CA91CX42_LINT_MBOX; +} + +static u32 ca91cx42_IACK_irqhandler(struct ca91cx42_driver *bridge) +{ + wake_up(&bridge->iack_queue); + + return CA91CX42_LINT_SW_IACK; +} + +static u32 ca91cx42_VERR_irqhandler(struct vme_bridge *ca91cx42_bridge) +{ + int val; + struct ca91cx42_driver *bridge; + + bridge = ca91cx42_bridge->driver_priv; + + val = ioread32(bridge->base + DGCS); + + if (!(val & 0x00000800)) { + dev_err(ca91cx42_bridge->parent, "ca91cx42_VERR_irqhandler DMA " + "Read Error DGCS=%08X\n", val); + } + + return CA91CX42_LINT_VERR; +} + +static u32 ca91cx42_LERR_irqhandler(struct vme_bridge *ca91cx42_bridge) +{ + int val; + struct ca91cx42_driver *bridge; + + bridge = ca91cx42_bridge->driver_priv; + + val = ioread32(bridge->base + DGCS); + + if (!(val & 0x00000800)) + dev_err(ca91cx42_bridge->parent, "ca91cx42_LERR_irqhandler DMA " + "Read Error DGCS=%08X\n", val); + + return CA91CX42_LINT_LERR; +} + + +static u32 ca91cx42_VIRQ_irqhandler(struct vme_bridge *ca91cx42_bridge, + int stat) +{ + int vec, i, serviced = 0; + struct ca91cx42_driver *bridge; + + bridge = ca91cx42_bridge->driver_priv; + + + for (i = 7; i > 0; i--) { + if (stat & (1 << i)) { + vec = ioread32(bridge->base + + CA91CX42_V_STATID[i]) & 0xff; + + vme_irq_handler(ca91cx42_bridge, i, vec); + + serviced |= (1 << i); + } + } + + return serviced; +} + +static irqreturn_t ca91cx42_irqhandler(int irq, void *ptr) +{ + u32 stat, enable, serviced = 0; + struct vme_bridge *ca91cx42_bridge; + struct ca91cx42_driver *bridge; + + ca91cx42_bridge = ptr; + + bridge = ca91cx42_bridge->driver_priv; + + enable = ioread32(bridge->base + LINT_EN); + stat = ioread32(bridge->base + LINT_STAT); + + /* Only look at unmasked interrupts */ + stat &= enable; + + if (unlikely(!stat)) + return IRQ_NONE; + + if (stat & CA91CX42_LINT_DMA) + serviced |= ca91cx42_DMA_irqhandler(bridge); + if (stat & (CA91CX42_LINT_LM0 | CA91CX42_LINT_LM1 | CA91CX42_LINT_LM2 | + CA91CX42_LINT_LM3)) + serviced |= ca91cx42_LM_irqhandler(bridge, stat); + if (stat & CA91CX42_LINT_MBOX) + serviced |= ca91cx42_MB_irqhandler(bridge, stat); + if (stat & CA91CX42_LINT_SW_IACK) + serviced |= ca91cx42_IACK_irqhandler(bridge); + if (stat & CA91CX42_LINT_VERR) + serviced |= ca91cx42_VERR_irqhandler(ca91cx42_bridge); + if (stat & CA91CX42_LINT_LERR) + serviced |= ca91cx42_LERR_irqhandler(ca91cx42_bridge); + if (stat & (CA91CX42_LINT_VIRQ1 | CA91CX42_LINT_VIRQ2 | + CA91CX42_LINT_VIRQ3 | CA91CX42_LINT_VIRQ4 | + CA91CX42_LINT_VIRQ5 | CA91CX42_LINT_VIRQ6 | + CA91CX42_LINT_VIRQ7)) + serviced |= ca91cx42_VIRQ_irqhandler(ca91cx42_bridge, stat); + + /* Clear serviced interrupts */ + iowrite32(serviced, bridge->base + LINT_STAT); + + return IRQ_HANDLED; +} + +static int ca91cx42_irq_init(struct vme_bridge *ca91cx42_bridge) +{ + int result, tmp; + struct pci_dev *pdev; + struct ca91cx42_driver *bridge; + + bridge = ca91cx42_bridge->driver_priv; + + /* Need pdev */ + pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, dev); + + /* Initialise list for VME bus errors */ + INIT_LIST_HEAD(&ca91cx42_bridge->vme_errors); + + mutex_init(&ca91cx42_bridge->irq_mtx); + + /* Disable interrupts from PCI to VME */ + iowrite32(0, bridge->base + VINT_EN); + + /* Disable PCI interrupts */ + iowrite32(0, bridge->base + LINT_EN); + /* Clear Any Pending PCI Interrupts */ + iowrite32(0x00FFFFFF, bridge->base + LINT_STAT); + + result = request_irq(pdev->irq, ca91cx42_irqhandler, IRQF_SHARED, + driver_name, ca91cx42_bridge); + if (result) { + dev_err(&pdev->dev, "Can't get assigned pci irq vector %02X\n", + pdev->irq); + return result; + } + + /* Ensure all interrupts are mapped to PCI Interrupt 0 */ + iowrite32(0, bridge->base + LINT_MAP0); + iowrite32(0, bridge->base + LINT_MAP1); + iowrite32(0, bridge->base + LINT_MAP2); + + /* Enable DMA, mailbox & LM Interrupts */ + tmp = CA91CX42_LINT_MBOX3 | CA91CX42_LINT_MBOX2 | CA91CX42_LINT_MBOX1 | + CA91CX42_LINT_MBOX0 | CA91CX42_LINT_SW_IACK | + CA91CX42_LINT_VERR | CA91CX42_LINT_LERR | CA91CX42_LINT_DMA; + + iowrite32(tmp, bridge->base + LINT_EN); + + return 0; +} + +static void ca91cx42_irq_exit(struct ca91cx42_driver *bridge, + struct pci_dev *pdev) +{ + /* Disable interrupts from PCI to VME */ + iowrite32(0, bridge->base + VINT_EN); + + /* Disable PCI interrupts */ + iowrite32(0, bridge->base + LINT_EN); + /* Clear Any Pending PCI Interrupts */ + iowrite32(0x00FFFFFF, bridge->base + LINT_STAT); + + free_irq(pdev->irq, pdev); +} + +static int ca91cx42_iack_received(struct ca91cx42_driver *bridge, int level) +{ + u32 tmp; + + tmp = ioread32(bridge->base + LINT_STAT); + + if (tmp & (1 << level)) + return 0; + else + return 1; +} + +/* + * Set up an VME interrupt + */ +static void ca91cx42_irq_set(struct vme_bridge *ca91cx42_bridge, int level, + int state, int sync) + +{ + struct pci_dev *pdev; + u32 tmp; + struct ca91cx42_driver *bridge; + + bridge = ca91cx42_bridge->driver_priv; + + /* Enable IRQ level */ + tmp = ioread32(bridge->base + LINT_EN); + + if (state == 0) + tmp &= ~CA91CX42_LINT_VIRQ[level]; + else + tmp |= CA91CX42_LINT_VIRQ[level]; + + iowrite32(tmp, bridge->base + LINT_EN); + + if ((state == 0) && (sync != 0)) { + pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, + dev); + + synchronize_irq(pdev->irq); + } +} + +static int ca91cx42_irq_generate(struct vme_bridge *ca91cx42_bridge, int level, + int statid) +{ + u32 tmp; + struct ca91cx42_driver *bridge; + + bridge = ca91cx42_bridge->driver_priv; + + /* Universe can only generate even vectors */ + if (statid & 1) + return -EINVAL; + + mutex_lock(&bridge->vme_int); + + tmp = ioread32(bridge->base + VINT_EN); + + /* Set Status/ID */ + iowrite32(statid << 24, bridge->base + STATID); + + /* Assert VMEbus IRQ */ + tmp = tmp | (1 << (level + 24)); + iowrite32(tmp, bridge->base + VINT_EN); + + /* Wait for IACK */ + wait_event_interruptible(bridge->iack_queue, + ca91cx42_iack_received(bridge, level)); + + /* Return interrupt to low state */ + tmp = ioread32(bridge->base + VINT_EN); + tmp = tmp & ~(1 << (level + 24)); + iowrite32(tmp, bridge->base + VINT_EN); + + mutex_unlock(&bridge->vme_int); + + return 0; +} + +static int ca91cx42_slave_set(struct vme_slave_resource *image, int enabled, + unsigned long long vme_base, unsigned long long size, + dma_addr_t pci_base, u32 aspace, u32 cycle) +{ + unsigned int i, addr = 0, granularity; + unsigned int temp_ctl = 0; + unsigned int vme_bound, pci_offset; + struct vme_bridge *ca91cx42_bridge; + struct ca91cx42_driver *bridge; + + ca91cx42_bridge = image->parent; + + bridge = ca91cx42_bridge->driver_priv; + + i = image->number; + + switch (aspace) { + case VME_A16: + addr |= CA91CX42_VSI_CTL_VAS_A16; + break; + case VME_A24: + addr |= CA91CX42_VSI_CTL_VAS_A24; + break; + case VME_A32: + addr |= CA91CX42_VSI_CTL_VAS_A32; + break; + case VME_USER1: + addr |= CA91CX42_VSI_CTL_VAS_USER1; + break; + case VME_USER2: + addr |= CA91CX42_VSI_CTL_VAS_USER2; + break; + case VME_A64: + case VME_CRCSR: + case VME_USER3: + case VME_USER4: + default: + dev_err(ca91cx42_bridge->parent, "Invalid address space\n"); + return -EINVAL; + break; + } + + /* + * Bound address is a valid address for the window, adjust + * accordingly + */ + vme_bound = vme_base + size; + pci_offset = pci_base - vme_base; + + if ((i == 0) || (i == 4)) + granularity = 0x1000; + else + granularity = 0x10000; + + if (vme_base & (granularity - 1)) { + dev_err(ca91cx42_bridge->parent, "Invalid VME base " + "alignment\n"); + return -EINVAL; + } + if (vme_bound & (granularity - 1)) { + dev_err(ca91cx42_bridge->parent, "Invalid VME bound " + "alignment\n"); + return -EINVAL; + } + if (pci_offset & (granularity - 1)) { + dev_err(ca91cx42_bridge->parent, "Invalid PCI Offset " + "alignment\n"); + return -EINVAL; + } + + /* Disable while we are mucking around */ + temp_ctl = ioread32(bridge->base + CA91CX42_VSI_CTL[i]); + temp_ctl &= ~CA91CX42_VSI_CTL_EN; + iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]); + + /* Setup mapping */ + iowrite32(vme_base, bridge->base + CA91CX42_VSI_BS[i]); + iowrite32(vme_bound, bridge->base + CA91CX42_VSI_BD[i]); + iowrite32(pci_offset, bridge->base + CA91CX42_VSI_TO[i]); + + /* Setup address space */ + temp_ctl &= ~CA91CX42_VSI_CTL_VAS_M; + temp_ctl |= addr; + + /* Setup cycle types */ + temp_ctl &= ~(CA91CX42_VSI_CTL_PGM_M | CA91CX42_VSI_CTL_SUPER_M); + if (cycle & VME_SUPER) + temp_ctl |= CA91CX42_VSI_CTL_SUPER_SUPR; + if (cycle & VME_USER) + temp_ctl |= CA91CX42_VSI_CTL_SUPER_NPRIV; + if (cycle & VME_PROG) + temp_ctl |= CA91CX42_VSI_CTL_PGM_PGM; + if (cycle & VME_DATA) + temp_ctl |= CA91CX42_VSI_CTL_PGM_DATA; + + /* Write ctl reg without enable */ + iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]); + + if (enabled) + temp_ctl |= CA91CX42_VSI_CTL_EN; + + iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]); + + return 0; +} + +static int ca91cx42_slave_get(struct vme_slave_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + dma_addr_t *pci_base, u32 *aspace, u32 *cycle) +{ + unsigned int i, granularity = 0, ctl = 0; + unsigned long long vme_bound, pci_offset; + struct ca91cx42_driver *bridge; + + bridge = image->parent->driver_priv; + + i = image->number; + + if ((i == 0) || (i == 4)) + granularity = 0x1000; + else + granularity = 0x10000; + + /* Read Registers */ + ctl = ioread32(bridge->base + CA91CX42_VSI_CTL[i]); + + *vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]); + vme_bound = ioread32(bridge->base + CA91CX42_VSI_BD[i]); + pci_offset = ioread32(bridge->base + CA91CX42_VSI_TO[i]); + + *pci_base = (dma_addr_t)vme_base + pci_offset; + *size = (unsigned long long)((vme_bound - *vme_base) + granularity); + + *enabled = 0; + *aspace = 0; + *cycle = 0; + + if (ctl & CA91CX42_VSI_CTL_EN) + *enabled = 1; + + if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A16) + *aspace = VME_A16; + if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A24) + *aspace = VME_A24; + if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A32) + *aspace = VME_A32; + if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_USER1) + *aspace = VME_USER1; + if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_USER2) + *aspace = VME_USER2; + + if (ctl & CA91CX42_VSI_CTL_SUPER_SUPR) + *cycle |= VME_SUPER; + if (ctl & CA91CX42_VSI_CTL_SUPER_NPRIV) + *cycle |= VME_USER; + if (ctl & CA91CX42_VSI_CTL_PGM_PGM) + *cycle |= VME_PROG; + if (ctl & CA91CX42_VSI_CTL_PGM_DATA) + *cycle |= VME_DATA; + + return 0; +} + +/* + * Allocate and map PCI Resource + */ +static int ca91cx42_alloc_resource(struct vme_master_resource *image, + unsigned long long size) +{ + unsigned long long existing_size; + int retval = 0; + struct pci_dev *pdev; + struct vme_bridge *ca91cx42_bridge; + + ca91cx42_bridge = image->parent; + + /* Find pci_dev container of dev */ + if (ca91cx42_bridge->parent == NULL) { + dev_err(ca91cx42_bridge->parent, "Dev entry NULL\n"); + return -EINVAL; + } + pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, dev); + + existing_size = (unsigned long long)(image->bus_resource.end - + image->bus_resource.start); + + /* If the existing size is OK, return */ + if (existing_size == (size - 1)) + return 0; + + if (existing_size != 0) { + iounmap(image->kern_base); + image->kern_base = NULL; + kfree(image->bus_resource.name); + release_resource(&image->bus_resource); + memset(&image->bus_resource, 0, sizeof(struct resource)); + } + + if (image->bus_resource.name == NULL) { + image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC); + if (image->bus_resource.name == NULL) { + dev_err(ca91cx42_bridge->parent, "Unable to allocate " + "memory for resource name\n"); + retval = -ENOMEM; + goto err_name; + } + } + + sprintf((char *)image->bus_resource.name, "%s.%d", + ca91cx42_bridge->name, image->number); + + image->bus_resource.start = 0; + image->bus_resource.end = (unsigned long)size; + image->bus_resource.flags = IORESOURCE_MEM; + + retval = pci_bus_alloc_resource(pdev->bus, + &image->bus_resource, size, size, PCIBIOS_MIN_MEM, + 0, NULL, NULL); + if (retval) { + dev_err(ca91cx42_bridge->parent, "Failed to allocate mem " + "resource for window %d size 0x%lx start 0x%lx\n", + image->number, (unsigned long)size, + (unsigned long)image->bus_resource.start); + goto err_resource; + } + + image->kern_base = ioremap_nocache( + image->bus_resource.start, size); + if (image->kern_base == NULL) { + dev_err(ca91cx42_bridge->parent, "Failed to remap resource\n"); + retval = -ENOMEM; + goto err_remap; + } + + return 0; + +err_remap: + release_resource(&image->bus_resource); +err_resource: + kfree(image->bus_resource.name); + memset(&image->bus_resource, 0, sizeof(struct resource)); +err_name: + return retval; +} + +/* + * Free and unmap PCI Resource + */ +static void ca91cx42_free_resource(struct vme_master_resource *image) +{ + iounmap(image->kern_base); + image->kern_base = NULL; + release_resource(&image->bus_resource); + kfree(image->bus_resource.name); + memset(&image->bus_resource, 0, sizeof(struct resource)); +} + + +static int ca91cx42_master_set(struct vme_master_resource *image, int enabled, + unsigned long long vme_base, unsigned long long size, u32 aspace, + u32 cycle, u32 dwidth) +{ + int retval = 0; + unsigned int i, granularity = 0; + unsigned int temp_ctl = 0; + unsigned long long pci_bound, vme_offset, pci_base; + struct vme_bridge *ca91cx42_bridge; + struct ca91cx42_driver *bridge; + + ca91cx42_bridge = image->parent; + + bridge = ca91cx42_bridge->driver_priv; + + i = image->number; + + if ((i == 0) || (i == 4)) + granularity = 0x1000; + else + granularity = 0x10000; + + /* Verify input data */ + if (vme_base & (granularity - 1)) { + dev_err(ca91cx42_bridge->parent, "Invalid VME Window " + "alignment\n"); + retval = -EINVAL; + goto err_window; + } + if (size & (granularity - 1)) { + dev_err(ca91cx42_bridge->parent, "Invalid VME Window " + "alignment\n"); + retval = -EINVAL; + goto err_window; + } + + spin_lock(&image->lock); + + /* + * Let's allocate the resource here rather than further up the stack as + * it avoids pushing loads of bus dependent stuff up the stack + */ + retval = ca91cx42_alloc_resource(image, size); + if (retval) { + spin_unlock(&image->lock); + dev_err(ca91cx42_bridge->parent, "Unable to allocate memory " + "for resource name\n"); + retval = -ENOMEM; + goto err_res; + } + + pci_base = (unsigned long long)image->bus_resource.start; + + /* + * Bound address is a valid address for the window, adjust + * according to window granularity. + */ + pci_bound = pci_base + size; + vme_offset = vme_base - pci_base; + + /* Disable while we are mucking around */ + temp_ctl = ioread32(bridge->base + CA91CX42_LSI_CTL[i]); + temp_ctl &= ~CA91CX42_LSI_CTL_EN; + iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]); + + /* Setup cycle types */ + temp_ctl &= ~CA91CX42_LSI_CTL_VCT_M; + if (cycle & VME_BLT) + temp_ctl |= CA91CX42_LSI_CTL_VCT_BLT; + if (cycle & VME_MBLT) + temp_ctl |= CA91CX42_LSI_CTL_VCT_MBLT; + + /* Setup data width */ + temp_ctl &= ~CA91CX42_LSI_CTL_VDW_M; + switch (dwidth) { + case VME_D8: + temp_ctl |= CA91CX42_LSI_CTL_VDW_D8; + break; + case VME_D16: + temp_ctl |= CA91CX42_LSI_CTL_VDW_D16; + break; + case VME_D32: + temp_ctl |= CA91CX42_LSI_CTL_VDW_D32; + break; + case VME_D64: + temp_ctl |= CA91CX42_LSI_CTL_VDW_D64; + break; + default: + spin_unlock(&image->lock); + dev_err(ca91cx42_bridge->parent, "Invalid data width\n"); + retval = -EINVAL; + goto err_dwidth; + break; + } + + /* Setup address space */ + temp_ctl &= ~CA91CX42_LSI_CTL_VAS_M; + switch (aspace) { + case VME_A16: + temp_ctl |= CA91CX42_LSI_CTL_VAS_A16; + break; + case VME_A24: + temp_ctl |= CA91CX42_LSI_CTL_VAS_A24; + break; + case VME_A32: + temp_ctl |= CA91CX42_LSI_CTL_VAS_A32; + break; + case VME_CRCSR: + temp_ctl |= CA91CX42_LSI_CTL_VAS_CRCSR; + break; + case VME_USER1: + temp_ctl |= CA91CX42_LSI_CTL_VAS_USER1; + break; + case VME_USER2: + temp_ctl |= CA91CX42_LSI_CTL_VAS_USER2; + break; + case VME_A64: + case VME_USER3: + case VME_USER4: + default: + spin_unlock(&image->lock); + dev_err(ca91cx42_bridge->parent, "Invalid address space\n"); + retval = -EINVAL; + goto err_aspace; + break; + } + + temp_ctl &= ~(CA91CX42_LSI_CTL_PGM_M | CA91CX42_LSI_CTL_SUPER_M); + if (cycle & VME_SUPER) + temp_ctl |= CA91CX42_LSI_CTL_SUPER_SUPR; + if (cycle & VME_PROG) + temp_ctl |= CA91CX42_LSI_CTL_PGM_PGM; + + /* Setup mapping */ + iowrite32(pci_base, bridge->base + CA91CX42_LSI_BS[i]); + iowrite32(pci_bound, bridge->base + CA91CX42_LSI_BD[i]); + iowrite32(vme_offset, bridge->base + CA91CX42_LSI_TO[i]); + + /* Write ctl reg without enable */ + iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]); + + if (enabled) + temp_ctl |= CA91CX42_LSI_CTL_EN; + + iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]); + + spin_unlock(&image->lock); + return 0; + +err_aspace: +err_dwidth: + ca91cx42_free_resource(image); +err_res: +err_window: + return retval; +} + +static int __ca91cx42_master_get(struct vme_master_resource *image, + int *enabled, unsigned long long *vme_base, unsigned long long *size, + u32 *aspace, u32 *cycle, u32 *dwidth) +{ + unsigned int i, ctl; + unsigned long long pci_base, pci_bound, vme_offset; + struct ca91cx42_driver *bridge; + + bridge = image->parent->driver_priv; + + i = image->number; + + ctl = ioread32(bridge->base + CA91CX42_LSI_CTL[i]); + + pci_base = ioread32(bridge->base + CA91CX42_LSI_BS[i]); + vme_offset = ioread32(bridge->base + CA91CX42_LSI_TO[i]); + pci_bound = ioread32(bridge->base + CA91CX42_LSI_BD[i]); + + *vme_base = pci_base + vme_offset; + *size = (unsigned long long)(pci_bound - pci_base); + + *enabled = 0; + *aspace = 0; + *cycle = 0; + *dwidth = 0; + + if (ctl & CA91CX42_LSI_CTL_EN) + *enabled = 1; + + /* Setup address space */ + switch (ctl & CA91CX42_LSI_CTL_VAS_M) { + case CA91CX42_LSI_CTL_VAS_A16: + *aspace = VME_A16; + break; + case CA91CX42_LSI_CTL_VAS_A24: + *aspace = VME_A24; + break; + case CA91CX42_LSI_CTL_VAS_A32: + *aspace = VME_A32; + break; + case CA91CX42_LSI_CTL_VAS_CRCSR: + *aspace = VME_CRCSR; + break; + case CA91CX42_LSI_CTL_VAS_USER1: + *aspace = VME_USER1; + break; + case CA91CX42_LSI_CTL_VAS_USER2: + *aspace = VME_USER2; + break; + } + + /* XXX Not sure howto check for MBLT */ + /* Setup cycle types */ + if (ctl & CA91CX42_LSI_CTL_VCT_BLT) + *cycle |= VME_BLT; + else + *cycle |= VME_SCT; + + if (ctl & CA91CX42_LSI_CTL_SUPER_SUPR) + *cycle |= VME_SUPER; + else + *cycle |= VME_USER; + + if (ctl & CA91CX42_LSI_CTL_PGM_PGM) + *cycle = VME_PROG; + else + *cycle = VME_DATA; + + /* Setup data width */ + switch (ctl & CA91CX42_LSI_CTL_VDW_M) { + case CA91CX42_LSI_CTL_VDW_D8: + *dwidth = VME_D8; + break; + case CA91CX42_LSI_CTL_VDW_D16: + *dwidth = VME_D16; + break; + case CA91CX42_LSI_CTL_VDW_D32: + *dwidth = VME_D32; + break; + case CA91CX42_LSI_CTL_VDW_D64: + *dwidth = VME_D64; + break; + } + + return 0; +} + +static int ca91cx42_master_get(struct vme_master_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, u32 *aspace, + u32 *cycle, u32 *dwidth) +{ + int retval; + + spin_lock(&image->lock); + + retval = __ca91cx42_master_get(image, enabled, vme_base, size, aspace, + cycle, dwidth); + + spin_unlock(&image->lock); + + return retval; +} + +static ssize_t ca91cx42_master_read(struct vme_master_resource *image, + void *buf, size_t count, loff_t offset) +{ + ssize_t retval; + void *addr = image->kern_base + offset; + unsigned int done = 0; + unsigned int count32; + + if (count == 0) + return 0; + + spin_lock(&image->lock); + + /* The following code handles VME address alignment problem + * in order to assure the maximal data width cycle. + * We cannot use memcpy_xxx directly here because it + * may cut data transfer in 8-bits cycles, thus making + * D16 cycle impossible. + * From the other hand, the bridge itself assures that + * maximal configured data cycle is used and splits it + * automatically for non-aligned addresses. + */ + if ((uintptr_t)addr & 0x1) { + *(u8 *)buf = ioread8(addr); + done += 1; + if (done == count) + goto out; + } + if ((uintptr_t)addr & 0x2) { + if ((count - done) < 2) { + *(u8 *)(buf + done) = ioread8(addr + done); + done += 1; + goto out; + } else { + *(u16 *)(buf + done) = ioread16(addr + done); + done += 2; + } + } + + count32 = (count - done) & ~0x3; + if (count32 > 0) { + memcpy_fromio(buf + done, addr + done, (unsigned int)count); + done += count32; + } + + if ((count - done) & 0x2) { + *(u16 *)(buf + done) = ioread16(addr + done); + done += 2; + } + if ((count - done) & 0x1) { + *(u8 *)(buf + done) = ioread8(addr + done); + done += 1; + } +out: + retval = count; + spin_unlock(&image->lock); + + return retval; +} + +static ssize_t ca91cx42_master_write(struct vme_master_resource *image, + void *buf, size_t count, loff_t offset) +{ + ssize_t retval; + void *addr = image->kern_base + offset; + unsigned int done = 0; + unsigned int count32; + + if (count == 0) + return 0; + + spin_lock(&image->lock); + + /* Here we apply for the same strategy we do in master_read + * function in order to assure D16 cycle when required. + */ + if ((uintptr_t)addr & 0x1) { + iowrite8(*(u8 *)buf, addr); + done += 1; + if (done == count) + goto out; + } + if ((uintptr_t)addr & 0x2) { + if ((count - done) < 2) { + iowrite8(*(u8 *)(buf + done), addr + done); + done += 1; + goto out; + } else { + iowrite16(*(u16 *)(buf + done), addr + done); + done += 2; + } + } + + count32 = (count - done) & ~0x3; + if (count32 > 0) { + memcpy_toio(addr + done, buf + done, count32); + done += count32; + } + + if ((count - done) & 0x2) { + iowrite16(*(u16 *)(buf + done), addr + done); + done += 2; + } + if ((count - done) & 0x1) { + iowrite8(*(u8 *)(buf + done), addr + done); + done += 1; + } +out: + retval = count; + + spin_unlock(&image->lock); + + return retval; +} + +static unsigned int ca91cx42_master_rmw(struct vme_master_resource *image, + unsigned int mask, unsigned int compare, unsigned int swap, + loff_t offset) +{ + u32 result; + uintptr_t pci_addr; + int i; + struct ca91cx42_driver *bridge; + struct device *dev; + + bridge = image->parent->driver_priv; + dev = image->parent->parent; + + /* Find the PCI address that maps to the desired VME address */ + i = image->number; + + /* Locking as we can only do one of these at a time */ + mutex_lock(&bridge->vme_rmw); + + /* Lock image */ + spin_lock(&image->lock); + + pci_addr = (uintptr_t)image->kern_base + offset; + + /* Address must be 4-byte aligned */ + if (pci_addr & 0x3) { + dev_err(dev, "RMW Address not 4-byte aligned\n"); + result = -EINVAL; + goto out; + } + + /* Ensure RMW Disabled whilst configuring */ + iowrite32(0, bridge->base + SCYC_CTL); + + /* Configure registers */ + iowrite32(mask, bridge->base + SCYC_EN); + iowrite32(compare, bridge->base + SCYC_CMP); + iowrite32(swap, bridge->base + SCYC_SWP); + iowrite32(pci_addr, bridge->base + SCYC_ADDR); + + /* Enable RMW */ + iowrite32(CA91CX42_SCYC_CTL_CYC_RMW, bridge->base + SCYC_CTL); + + /* Kick process off with a read to the required address. */ + result = ioread32(image->kern_base + offset); + + /* Disable RMW */ + iowrite32(0, bridge->base + SCYC_CTL); + +out: + spin_unlock(&image->lock); + + mutex_unlock(&bridge->vme_rmw); + + return result; +} + +static int ca91cx42_dma_list_add(struct vme_dma_list *list, + struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count) +{ + struct ca91cx42_dma_entry *entry, *prev; + struct vme_dma_pci *pci_attr; + struct vme_dma_vme *vme_attr; + dma_addr_t desc_ptr; + int retval = 0; + struct device *dev; + + dev = list->parent->parent->parent; + + /* XXX descriptor must be aligned on 64-bit boundaries */ + entry = kmalloc(sizeof(struct ca91cx42_dma_entry), GFP_KERNEL); + if (entry == NULL) { + dev_err(dev, "Failed to allocate memory for dma resource " + "structure\n"); + retval = -ENOMEM; + goto err_mem; + } + + /* Test descriptor alignment */ + if ((unsigned long)&entry->descriptor & CA91CX42_DCPP_M) { + dev_err(dev, "Descriptor not aligned to 16 byte boundary as " + "required: %p\n", &entry->descriptor); + retval = -EINVAL; + goto err_align; + } + + memset(&entry->descriptor, 0, sizeof(struct ca91cx42_dma_descriptor)); + + if (dest->type == VME_DMA_VME) { + entry->descriptor.dctl |= CA91CX42_DCTL_L2V; + vme_attr = dest->private; + pci_attr = src->private; + } else { + vme_attr = src->private; + pci_attr = dest->private; + } + + /* Check we can do fulfill required attributes */ + if ((vme_attr->aspace & ~(VME_A16 | VME_A24 | VME_A32 | VME_USER1 | + VME_USER2)) != 0) { + + dev_err(dev, "Unsupported cycle type\n"); + retval = -EINVAL; + goto err_aspace; + } + + if ((vme_attr->cycle & ~(VME_SCT | VME_BLT | VME_SUPER | VME_USER | + VME_PROG | VME_DATA)) != 0) { + + dev_err(dev, "Unsupported cycle type\n"); + retval = -EINVAL; + goto err_cycle; + } + + /* Check to see if we can fulfill source and destination */ + if (!(((src->type == VME_DMA_PCI) && (dest->type == VME_DMA_VME)) || + ((src->type == VME_DMA_VME) && (dest->type == VME_DMA_PCI)))) { + + dev_err(dev, "Cannot perform transfer with this " + "source-destination combination\n"); + retval = -EINVAL; + goto err_direct; + } + + /* Setup cycle types */ + if (vme_attr->cycle & VME_BLT) + entry->descriptor.dctl |= CA91CX42_DCTL_VCT_BLT; + + /* Setup data width */ + switch (vme_attr->dwidth) { + case VME_D8: + entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D8; + break; + case VME_D16: + entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D16; + break; + case VME_D32: + entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D32; + break; + case VME_D64: + entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D64; + break; + default: + dev_err(dev, "Invalid data width\n"); + return -EINVAL; + } + + /* Setup address space */ + switch (vme_attr->aspace) { + case VME_A16: + entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A16; + break; + case VME_A24: + entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A24; + break; + case VME_A32: + entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A32; + break; + case VME_USER1: + entry->descriptor.dctl |= CA91CX42_DCTL_VAS_USER1; + break; + case VME_USER2: + entry->descriptor.dctl |= CA91CX42_DCTL_VAS_USER2; + break; + default: + dev_err(dev, "Invalid address space\n"); + return -EINVAL; + break; + } + + if (vme_attr->cycle & VME_SUPER) + entry->descriptor.dctl |= CA91CX42_DCTL_SUPER_SUPR; + if (vme_attr->cycle & VME_PROG) + entry->descriptor.dctl |= CA91CX42_DCTL_PGM_PGM; + + entry->descriptor.dtbc = count; + entry->descriptor.dla = pci_attr->address; + entry->descriptor.dva = vme_attr->address; + entry->descriptor.dcpp = CA91CX42_DCPP_NULL; + + /* Add to list */ + list_add_tail(&entry->list, &list->entries); + + /* Fill out previous descriptors "Next Address" */ + if (entry->list.prev != &list->entries) { + prev = list_entry(entry->list.prev, struct ca91cx42_dma_entry, + list); + /* We need the bus address for the pointer */ + desc_ptr = virt_to_bus(&entry->descriptor); + prev->descriptor.dcpp = desc_ptr & ~CA91CX42_DCPP_M; + } + + return 0; + +err_cycle: +err_aspace: +err_direct: +err_align: + kfree(entry); +err_mem: + return retval; +} + +static int ca91cx42_dma_busy(struct vme_bridge *ca91cx42_bridge) +{ + u32 tmp; + struct ca91cx42_driver *bridge; + + bridge = ca91cx42_bridge->driver_priv; + + tmp = ioread32(bridge->base + DGCS); + + if (tmp & CA91CX42_DGCS_ACT) + return 0; + else + return 1; +} + +static int ca91cx42_dma_list_exec(struct vme_dma_list *list) +{ + struct vme_dma_resource *ctrlr; + struct ca91cx42_dma_entry *entry; + int retval = 0; + dma_addr_t bus_addr; + u32 val; + struct device *dev; + struct ca91cx42_driver *bridge; + + ctrlr = list->parent; + + bridge = ctrlr->parent->driver_priv; + dev = ctrlr->parent->parent; + + mutex_lock(&ctrlr->mtx); + + if (!(list_empty(&ctrlr->running))) { + /* + * XXX We have an active DMA transfer and currently haven't + * sorted out the mechanism for "pending" DMA transfers. + * Return busy. + */ + /* Need to add to pending here */ + mutex_unlock(&ctrlr->mtx); + return -EBUSY; + } else { + list_add(&list->list, &ctrlr->running); + } + + /* Get first bus address and write into registers */ + entry = list_first_entry(&list->entries, struct ca91cx42_dma_entry, + list); + + bus_addr = virt_to_bus(&entry->descriptor); + + mutex_unlock(&ctrlr->mtx); + + iowrite32(0, bridge->base + DTBC); + iowrite32(bus_addr & ~CA91CX42_DCPP_M, bridge->base + DCPP); + + /* Start the operation */ + val = ioread32(bridge->base + DGCS); + + /* XXX Could set VMEbus On and Off Counters here */ + val &= (CA91CX42_DGCS_VON_M | CA91CX42_DGCS_VOFF_M); + + val |= (CA91CX42_DGCS_CHAIN | CA91CX42_DGCS_STOP | CA91CX42_DGCS_HALT | + CA91CX42_DGCS_DONE | CA91CX42_DGCS_LERR | CA91CX42_DGCS_VERR | + CA91CX42_DGCS_PERR); + + iowrite32(val, bridge->base + DGCS); + + val |= CA91CX42_DGCS_GO; + + iowrite32(val, bridge->base + DGCS); + + wait_event_interruptible(bridge->dma_queue, + ca91cx42_dma_busy(ctrlr->parent)); + + /* + * Read status register, this register is valid until we kick off a + * new transfer. + */ + val = ioread32(bridge->base + DGCS); + + if (val & (CA91CX42_DGCS_LERR | CA91CX42_DGCS_VERR | + CA91CX42_DGCS_PERR)) { + + dev_err(dev, "ca91c042: DMA Error. DGCS=%08X\n", val); + val = ioread32(bridge->base + DCTL); + } + + /* Remove list from running list */ + mutex_lock(&ctrlr->mtx); + list_del(&list->list); + mutex_unlock(&ctrlr->mtx); + + return retval; + +} + +static int ca91cx42_dma_list_empty(struct vme_dma_list *list) +{ + struct list_head *pos, *temp; + struct ca91cx42_dma_entry *entry; + + /* detach and free each entry */ + list_for_each_safe(pos, temp, &list->entries) { + list_del(pos); + entry = list_entry(pos, struct ca91cx42_dma_entry, list); + kfree(entry); + } + + return 0; +} + +/* + * All 4 location monitors reside at the same base - this is therefore a + * system wide configuration. + * + * This does not enable the LM monitor - that should be done when the first + * callback is attached and disabled when the last callback is removed. + */ +static int ca91cx42_lm_set(struct vme_lm_resource *lm, + unsigned long long lm_base, u32 aspace, u32 cycle) +{ + u32 temp_base, lm_ctl = 0; + int i; + struct ca91cx42_driver *bridge; + struct device *dev; + + bridge = lm->parent->driver_priv; + dev = lm->parent->parent; + + /* Check the alignment of the location monitor */ + temp_base = (u32)lm_base; + if (temp_base & 0xffff) { + dev_err(dev, "Location monitor must be aligned to 64KB " + "boundary"); + return -EINVAL; + } + + mutex_lock(&lm->mtx); + + /* If we already have a callback attached, we can't move it! */ + for (i = 0; i < lm->monitors; i++) { + if (bridge->lm_callback[i] != NULL) { + mutex_unlock(&lm->mtx); + dev_err(dev, "Location monitor callback attached, " + "can't reset\n"); + return -EBUSY; + } + } + + switch (aspace) { + case VME_A16: + lm_ctl |= CA91CX42_LM_CTL_AS_A16; + break; + case VME_A24: + lm_ctl |= CA91CX42_LM_CTL_AS_A24; + break; + case VME_A32: + lm_ctl |= CA91CX42_LM_CTL_AS_A32; + break; + default: + mutex_unlock(&lm->mtx); + dev_err(dev, "Invalid address space\n"); + return -EINVAL; + break; + } + + if (cycle & VME_SUPER) + lm_ctl |= CA91CX42_LM_CTL_SUPR; + if (cycle & VME_USER) + lm_ctl |= CA91CX42_LM_CTL_NPRIV; + if (cycle & VME_PROG) + lm_ctl |= CA91CX42_LM_CTL_PGM; + if (cycle & VME_DATA) + lm_ctl |= CA91CX42_LM_CTL_DATA; + + iowrite32(lm_base, bridge->base + LM_BS); + iowrite32(lm_ctl, bridge->base + LM_CTL); + + mutex_unlock(&lm->mtx); + + return 0; +} + +/* Get configuration of the callback monitor and return whether it is enabled + * or disabled. + */ +static int ca91cx42_lm_get(struct vme_lm_resource *lm, + unsigned long long *lm_base, u32 *aspace, u32 *cycle) +{ + u32 lm_ctl, enabled = 0; + struct ca91cx42_driver *bridge; + + bridge = lm->parent->driver_priv; + + mutex_lock(&lm->mtx); + + *lm_base = (unsigned long long)ioread32(bridge->base + LM_BS); + lm_ctl = ioread32(bridge->base + LM_CTL); + + if (lm_ctl & CA91CX42_LM_CTL_EN) + enabled = 1; + + if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A16) + *aspace = VME_A16; + if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A24) + *aspace = VME_A24; + if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A32) + *aspace = VME_A32; + + *cycle = 0; + if (lm_ctl & CA91CX42_LM_CTL_SUPR) + *cycle |= VME_SUPER; + if (lm_ctl & CA91CX42_LM_CTL_NPRIV) + *cycle |= VME_USER; + if (lm_ctl & CA91CX42_LM_CTL_PGM) + *cycle |= VME_PROG; + if (lm_ctl & CA91CX42_LM_CTL_DATA) + *cycle |= VME_DATA; + + mutex_unlock(&lm->mtx); + + return enabled; +} + +/* + * Attach a callback to a specific location monitor. + * + * Callback will be passed the monitor triggered. + */ +static int ca91cx42_lm_attach(struct vme_lm_resource *lm, int monitor, + void (*callback)(int)) +{ + u32 lm_ctl, tmp; + struct ca91cx42_driver *bridge; + struct device *dev; + + bridge = lm->parent->driver_priv; + dev = lm->parent->parent; + + mutex_lock(&lm->mtx); + + /* Ensure that the location monitor is configured - need PGM or DATA */ + lm_ctl = ioread32(bridge->base + LM_CTL); + if ((lm_ctl & (CA91CX42_LM_CTL_PGM | CA91CX42_LM_CTL_DATA)) == 0) { + mutex_unlock(&lm->mtx); + dev_err(dev, "Location monitor not properly configured\n"); + return -EINVAL; + } + + /* Check that a callback isn't already attached */ + if (bridge->lm_callback[monitor] != NULL) { + mutex_unlock(&lm->mtx); + dev_err(dev, "Existing callback attached\n"); + return -EBUSY; + } + + /* Attach callback */ + bridge->lm_callback[monitor] = callback; + + /* Enable Location Monitor interrupt */ + tmp = ioread32(bridge->base + LINT_EN); + tmp |= CA91CX42_LINT_LM[monitor]; + iowrite32(tmp, bridge->base + LINT_EN); + + /* Ensure that global Location Monitor Enable set */ + if ((lm_ctl & CA91CX42_LM_CTL_EN) == 0) { + lm_ctl |= CA91CX42_LM_CTL_EN; + iowrite32(lm_ctl, bridge->base + LM_CTL); + } + + mutex_unlock(&lm->mtx); + + return 0; +} + +/* + * Detach a callback function forn a specific location monitor. + */ +static int ca91cx42_lm_detach(struct vme_lm_resource *lm, int monitor) +{ + u32 tmp; + struct ca91cx42_driver *bridge; + + bridge = lm->parent->driver_priv; + + mutex_lock(&lm->mtx); + + /* Disable Location Monitor and ensure previous interrupts are clear */ + tmp = ioread32(bridge->base + LINT_EN); + tmp &= ~CA91CX42_LINT_LM[monitor]; + iowrite32(tmp, bridge->base + LINT_EN); + + iowrite32(CA91CX42_LINT_LM[monitor], + bridge->base + LINT_STAT); + + /* Detach callback */ + bridge->lm_callback[monitor] = NULL; + + /* If all location monitors disabled, disable global Location Monitor */ + if ((tmp & (CA91CX42_LINT_LM0 | CA91CX42_LINT_LM1 | CA91CX42_LINT_LM2 | + CA91CX42_LINT_LM3)) == 0) { + tmp = ioread32(bridge->base + LM_CTL); + tmp &= ~CA91CX42_LM_CTL_EN; + iowrite32(tmp, bridge->base + LM_CTL); + } + + mutex_unlock(&lm->mtx); + + return 0; +} + +static int ca91cx42_slot_get(struct vme_bridge *ca91cx42_bridge) +{ + u32 slot = 0; + struct ca91cx42_driver *bridge; + + bridge = ca91cx42_bridge->driver_priv; + + if (!geoid) { + slot = ioread32(bridge->base + VCSR_BS); + slot = ((slot & CA91CX42_VCSR_BS_SLOT_M) >> 27); + } else + slot = geoid; + + return (int)slot; + +} + +void *ca91cx42_alloc_consistent(struct device *parent, size_t size, + dma_addr_t *dma) +{ + struct pci_dev *pdev; + + /* Find pci_dev container of dev */ + pdev = container_of(parent, struct pci_dev, dev); + + return pci_alloc_consistent(pdev, size, dma); +} + +void ca91cx42_free_consistent(struct device *parent, size_t size, void *vaddr, + dma_addr_t dma) +{ + struct pci_dev *pdev; + + /* Find pci_dev container of dev */ + pdev = container_of(parent, struct pci_dev, dev); + + pci_free_consistent(pdev, size, vaddr, dma); +} + +static int __init ca91cx42_init(void) +{ + return pci_register_driver(&ca91cx42_driver); +} + +/* + * Configure CR/CSR space + * + * Access to the CR/CSR can be configured at power-up. The location of the + * CR/CSR registers in the CR/CSR address space is determined by the boards + * Auto-ID or Geographic address. This function ensures that the window is + * enabled at an offset consistent with the boards geopgraphic address. + */ +static int ca91cx42_crcsr_init(struct vme_bridge *ca91cx42_bridge, + struct pci_dev *pdev) +{ + unsigned int crcsr_addr; + int tmp, slot; + struct ca91cx42_driver *bridge; + + bridge = ca91cx42_bridge->driver_priv; + + slot = ca91cx42_slot_get(ca91cx42_bridge); + + /* Write CSR Base Address if slot ID is supplied as a module param */ + if (geoid) + iowrite32(geoid << 27, bridge->base + VCSR_BS); + + dev_info(&pdev->dev, "CR/CSR Offset: %d\n", slot); + if (slot == 0) { + dev_err(&pdev->dev, "Slot number is unset, not configuring " + "CR/CSR space\n"); + return -EINVAL; + } + + /* Allocate mem for CR/CSR image */ + bridge->crcsr_kernel = pci_alloc_consistent(pdev, VME_CRCSR_BUF_SIZE, + &bridge->crcsr_bus); + if (bridge->crcsr_kernel == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for CR/CSR " + "image\n"); + return -ENOMEM; + } + + memset(bridge->crcsr_kernel, 0, VME_CRCSR_BUF_SIZE); + + crcsr_addr = slot * (512 * 1024); + iowrite32(bridge->crcsr_bus - crcsr_addr, bridge->base + VCSR_TO); + + tmp = ioread32(bridge->base + VCSR_CTL); + tmp |= CA91CX42_VCSR_CTL_EN; + iowrite32(tmp, bridge->base + VCSR_CTL); + + return 0; +} + +static void ca91cx42_crcsr_exit(struct vme_bridge *ca91cx42_bridge, + struct pci_dev *pdev) +{ + u32 tmp; + struct ca91cx42_driver *bridge; + + bridge = ca91cx42_bridge->driver_priv; + + /* Turn off CR/CSR space */ + tmp = ioread32(bridge->base + VCSR_CTL); + tmp &= ~CA91CX42_VCSR_CTL_EN; + iowrite32(tmp, bridge->base + VCSR_CTL); + + /* Free image */ + iowrite32(0, bridge->base + VCSR_TO); + + pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, bridge->crcsr_kernel, + bridge->crcsr_bus); +} + +static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int retval, i; + u32 data; + struct list_head *pos = NULL; + struct vme_bridge *ca91cx42_bridge; + struct ca91cx42_driver *ca91cx42_device; + struct vme_master_resource *master_image; + struct vme_slave_resource *slave_image; + struct vme_dma_resource *dma_ctrlr; + struct vme_lm_resource *lm; + + /* We want to support more than one of each bridge so we need to + * dynamically allocate the bridge structure + */ + ca91cx42_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL); + + if (ca91cx42_bridge == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for device " + "structure\n"); + retval = -ENOMEM; + goto err_struct; + } + + ca91cx42_device = kzalloc(sizeof(struct ca91cx42_driver), GFP_KERNEL); + + if (ca91cx42_device == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for device " + "structure\n"); + retval = -ENOMEM; + goto err_driver; + } + + ca91cx42_bridge->driver_priv = ca91cx42_device; + + /* Enable the device */ + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "Unable to enable device\n"); + goto err_enable; + } + + /* Map Registers */ + retval = pci_request_regions(pdev, driver_name); + if (retval) { + dev_err(&pdev->dev, "Unable to reserve resources\n"); + goto err_resource; + } + + /* map registers in BAR 0 */ + ca91cx42_device->base = ioremap_nocache(pci_resource_start(pdev, 0), + 4096); + if (!ca91cx42_device->base) { + dev_err(&pdev->dev, "Unable to remap CRG region\n"); + retval = -EIO; + goto err_remap; + } + + /* Check to see if the mapping worked out */ + data = ioread32(ca91cx42_device->base + CA91CX42_PCI_ID) & 0x0000FFFF; + if (data != PCI_VENDOR_ID_TUNDRA) { + dev_err(&pdev->dev, "PCI_ID check failed\n"); + retval = -EIO; + goto err_test; + } + + /* Initialize wait queues & mutual exclusion flags */ + init_waitqueue_head(&ca91cx42_device->dma_queue); + init_waitqueue_head(&ca91cx42_device->iack_queue); + mutex_init(&ca91cx42_device->vme_int); + mutex_init(&ca91cx42_device->vme_rmw); + + ca91cx42_bridge->parent = &pdev->dev; + strcpy(ca91cx42_bridge->name, driver_name); + + /* Setup IRQ */ + retval = ca91cx42_irq_init(ca91cx42_bridge); + if (retval != 0) { + dev_err(&pdev->dev, "Chip Initialization failed.\n"); + goto err_irq; + } + + /* Add master windows to list */ + INIT_LIST_HEAD(&ca91cx42_bridge->master_resources); + for (i = 0; i < CA91C142_MAX_MASTER; i++) { + master_image = kmalloc(sizeof(struct vme_master_resource), + GFP_KERNEL); + if (master_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "master resource structure\n"); + retval = -ENOMEM; + goto err_master; + } + master_image->parent = ca91cx42_bridge; + spin_lock_init(&master_image->lock); + master_image->locked = 0; + master_image->number = i; + master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | + VME_CRCSR | VME_USER1 | VME_USER2; + master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_SUPER | VME_USER | VME_PROG | VME_DATA; + master_image->width_attr = VME_D8 | VME_D16 | VME_D32 | VME_D64; + memset(&master_image->bus_resource, 0, + sizeof(struct resource)); + master_image->kern_base = NULL; + list_add_tail(&master_image->list, + &ca91cx42_bridge->master_resources); + } + + /* Add slave windows to list */ + INIT_LIST_HEAD(&ca91cx42_bridge->slave_resources); + for (i = 0; i < CA91C142_MAX_SLAVE; i++) { + slave_image = kmalloc(sizeof(struct vme_slave_resource), + GFP_KERNEL); + if (slave_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "slave resource structure\n"); + retval = -ENOMEM; + goto err_slave; + } + slave_image->parent = ca91cx42_bridge; + mutex_init(&slave_image->mtx); + slave_image->locked = 0; + slave_image->number = i; + slave_image->address_attr = VME_A24 | VME_A32 | VME_USER1 | + VME_USER2; + + /* Only windows 0 and 4 support A16 */ + if (i == 0 || i == 4) + slave_image->address_attr |= VME_A16; + + slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_SUPER | VME_USER | VME_PROG | VME_DATA; + list_add_tail(&slave_image->list, + &ca91cx42_bridge->slave_resources); + } + + /* Add dma engines to list */ + INIT_LIST_HEAD(&ca91cx42_bridge->dma_resources); + for (i = 0; i < CA91C142_MAX_DMA; i++) { + dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource), + GFP_KERNEL); + if (dma_ctrlr == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "dma resource structure\n"); + retval = -ENOMEM; + goto err_dma; + } + dma_ctrlr->parent = ca91cx42_bridge; + mutex_init(&dma_ctrlr->mtx); + dma_ctrlr->locked = 0; + dma_ctrlr->number = i; + dma_ctrlr->route_attr = VME_DMA_VME_TO_MEM | + VME_DMA_MEM_TO_VME; + INIT_LIST_HEAD(&dma_ctrlr->pending); + INIT_LIST_HEAD(&dma_ctrlr->running); + list_add_tail(&dma_ctrlr->list, + &ca91cx42_bridge->dma_resources); + } + + /* Add location monitor to list */ + INIT_LIST_HEAD(&ca91cx42_bridge->lm_resources); + lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL); + if (lm == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "location monitor resource structure\n"); + retval = -ENOMEM; + goto err_lm; + } + lm->parent = ca91cx42_bridge; + mutex_init(&lm->mtx); + lm->locked = 0; + lm->number = 1; + lm->monitors = 4; + list_add_tail(&lm->list, &ca91cx42_bridge->lm_resources); + + ca91cx42_bridge->slave_get = ca91cx42_slave_get; + ca91cx42_bridge->slave_set = ca91cx42_slave_set; + ca91cx42_bridge->master_get = ca91cx42_master_get; + ca91cx42_bridge->master_set = ca91cx42_master_set; + ca91cx42_bridge->master_read = ca91cx42_master_read; + ca91cx42_bridge->master_write = ca91cx42_master_write; + ca91cx42_bridge->master_rmw = ca91cx42_master_rmw; + ca91cx42_bridge->dma_list_add = ca91cx42_dma_list_add; + ca91cx42_bridge->dma_list_exec = ca91cx42_dma_list_exec; + ca91cx42_bridge->dma_list_empty = ca91cx42_dma_list_empty; + ca91cx42_bridge->irq_set = ca91cx42_irq_set; + ca91cx42_bridge->irq_generate = ca91cx42_irq_generate; + ca91cx42_bridge->lm_set = ca91cx42_lm_set; + ca91cx42_bridge->lm_get = ca91cx42_lm_get; + ca91cx42_bridge->lm_attach = ca91cx42_lm_attach; + ca91cx42_bridge->lm_detach = ca91cx42_lm_detach; + ca91cx42_bridge->slot_get = ca91cx42_slot_get; + ca91cx42_bridge->alloc_consistent = ca91cx42_alloc_consistent; + ca91cx42_bridge->free_consistent = ca91cx42_free_consistent; + + data = ioread32(ca91cx42_device->base + MISC_CTL); + dev_info(&pdev->dev, "Board is%s the VME system controller\n", + (data & CA91CX42_MISC_CTL_SYSCON) ? "" : " not"); + dev_info(&pdev->dev, "Slot ID is %d\n", + ca91cx42_slot_get(ca91cx42_bridge)); + + if (ca91cx42_crcsr_init(ca91cx42_bridge, pdev)) + dev_err(&pdev->dev, "CR/CSR configuration failed.\n"); + + /* Need to save ca91cx42_bridge pointer locally in link list for use in + * ca91cx42_remove() + */ + retval = vme_register_bridge(ca91cx42_bridge); + if (retval != 0) { + dev_err(&pdev->dev, "Chip Registration failed.\n"); + goto err_reg; + } + + pci_set_drvdata(pdev, ca91cx42_bridge); + + return 0; + +err_reg: + ca91cx42_crcsr_exit(ca91cx42_bridge, pdev); +err_lm: + /* resources are stored in link list */ + list_for_each(pos, &ca91cx42_bridge->lm_resources) { + lm = list_entry(pos, struct vme_lm_resource, list); + list_del(pos); + kfree(lm); + } +err_dma: + /* resources are stored in link list */ + list_for_each(pos, &ca91cx42_bridge->dma_resources) { + dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); + list_del(pos); + kfree(dma_ctrlr); + } +err_slave: + /* resources are stored in link list */ + list_for_each(pos, &ca91cx42_bridge->slave_resources) { + slave_image = list_entry(pos, struct vme_slave_resource, list); + list_del(pos); + kfree(slave_image); + } +err_master: + /* resources are stored in link list */ + list_for_each(pos, &ca91cx42_bridge->master_resources) { + master_image = list_entry(pos, struct vme_master_resource, + list); + list_del(pos); + kfree(master_image); + } + + ca91cx42_irq_exit(ca91cx42_device, pdev); +err_irq: +err_test: + iounmap(ca91cx42_device->base); +err_remap: + pci_release_regions(pdev); +err_resource: + pci_disable_device(pdev); +err_enable: + kfree(ca91cx42_device); +err_driver: + kfree(ca91cx42_bridge); +err_struct: + return retval; + +} + +static void ca91cx42_remove(struct pci_dev *pdev) +{ + struct list_head *pos = NULL; + struct vme_master_resource *master_image; + struct vme_slave_resource *slave_image; + struct vme_dma_resource *dma_ctrlr; + struct vme_lm_resource *lm; + struct ca91cx42_driver *bridge; + struct vme_bridge *ca91cx42_bridge = pci_get_drvdata(pdev); + + bridge = ca91cx42_bridge->driver_priv; + + + /* Turn off Ints */ + iowrite32(0, bridge->base + LINT_EN); + + /* Turn off the windows */ + iowrite32(0x00800000, bridge->base + LSI0_CTL); + iowrite32(0x00800000, bridge->base + LSI1_CTL); + iowrite32(0x00800000, bridge->base + LSI2_CTL); + iowrite32(0x00800000, bridge->base + LSI3_CTL); + iowrite32(0x00800000, bridge->base + LSI4_CTL); + iowrite32(0x00800000, bridge->base + LSI5_CTL); + iowrite32(0x00800000, bridge->base + LSI6_CTL); + iowrite32(0x00800000, bridge->base + LSI7_CTL); + iowrite32(0x00F00000, bridge->base + VSI0_CTL); + iowrite32(0x00F00000, bridge->base + VSI1_CTL); + iowrite32(0x00F00000, bridge->base + VSI2_CTL); + iowrite32(0x00F00000, bridge->base + VSI3_CTL); + iowrite32(0x00F00000, bridge->base + VSI4_CTL); + iowrite32(0x00F00000, bridge->base + VSI5_CTL); + iowrite32(0x00F00000, bridge->base + VSI6_CTL); + iowrite32(0x00F00000, bridge->base + VSI7_CTL); + + vme_unregister_bridge(ca91cx42_bridge); + + ca91cx42_crcsr_exit(ca91cx42_bridge, pdev); + + /* resources are stored in link list */ + list_for_each(pos, &ca91cx42_bridge->lm_resources) { + lm = list_entry(pos, struct vme_lm_resource, list); + list_del(pos); + kfree(lm); + } + + /* resources are stored in link list */ + list_for_each(pos, &ca91cx42_bridge->dma_resources) { + dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); + list_del(pos); + kfree(dma_ctrlr); + } + + /* resources are stored in link list */ + list_for_each(pos, &ca91cx42_bridge->slave_resources) { + slave_image = list_entry(pos, struct vme_slave_resource, list); + list_del(pos); + kfree(slave_image); + } + + /* resources are stored in link list */ + list_for_each(pos, &ca91cx42_bridge->master_resources) { + master_image = list_entry(pos, struct vme_master_resource, + list); + list_del(pos); + kfree(master_image); + } + + ca91cx42_irq_exit(bridge, pdev); + + iounmap(bridge->base); + + pci_release_regions(pdev); + + pci_disable_device(pdev); + + kfree(ca91cx42_bridge); +} + +static void __exit ca91cx42_exit(void) +{ + pci_unregister_driver(&ca91cx42_driver); +} + +MODULE_PARM_DESC(geoid, "Override geographical addressing"); +module_param(geoid, int, 0); + +MODULE_DESCRIPTION("VME driver for the Tundra Universe II VME bridge"); +MODULE_LICENSE("GPL"); + +module_init(ca91cx42_init); +module_exit(ca91cx42_exit); diff --git a/drivers/vme/bridges/vme_ca91cx42.h b/drivers/vme/bridges/vme_ca91cx42.h new file mode 100644 index 0000000..02a7c79 --- /dev/null +++ b/drivers/vme/bridges/vme_ca91cx42.h @@ -0,0 +1,583 @@ +/* + * ca91c042.h + * + * Support for the Tundra Universe 1 and Universe II VME bridge chips + * + * Author: Tom Armistead + * Updated by Ajit Prem + * Copyright 2004 Motorola Inc. + * + * Further updated by Martyn Welch <martyn.welch@ge.com> + * Copyright 2009 GE Intelligent Platforms Embedded Systems, Inc. + * + * Derived from ca91c042.h by Michael Wyrick + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _CA91CX42_H +#define _CA91CX42_H + +#ifndef PCI_VENDOR_ID_TUNDRA +#define PCI_VENDOR_ID_TUNDRA 0x10e3 +#endif + +#ifndef PCI_DEVICE_ID_TUNDRA_CA91C142 +#define PCI_DEVICE_ID_TUNDRA_CA91C142 0x0000 +#endif + +/* + * Define the number of each that the CA91C142 supports. + */ +#define CA91C142_MAX_MASTER 8 /* Max Master Windows */ +#define CA91C142_MAX_SLAVE 8 /* Max Slave Windows */ +#define CA91C142_MAX_DMA 1 /* Max DMA Controllers */ +#define CA91C142_MAX_MAILBOX 4 /* Max Mail Box registers */ + +/* Structure used to hold driver specific information */ +struct ca91cx42_driver { + void __iomem *base; /* Base Address of device registers */ + wait_queue_head_t dma_queue; + wait_queue_head_t iack_queue; + wait_queue_head_t mbox_queue; + void (*lm_callback[4])(int); /* Called in interrupt handler */ + void *crcsr_kernel; + dma_addr_t crcsr_bus; + struct mutex vme_rmw; /* Only one RMW cycle at a time */ + struct mutex vme_int; /* + * Only one VME interrupt can be + * generated at a time, provide locking + */ +}; + +/* See Page 2-77 in the Universe User Manual */ +struct ca91cx42_dma_descriptor { + unsigned int dctl; /* DMA Control */ + unsigned int dtbc; /* Transfer Byte Count */ + unsigned int dla; /* PCI Address */ + unsigned int res1; /* Reserved */ + unsigned int dva; /* Vme Address */ + unsigned int res2; /* Reserved */ + unsigned int dcpp; /* Pointer to Numed Cmd Packet with rPN */ + unsigned int res3; /* Reserved */ +}; + +struct ca91cx42_dma_entry { + struct ca91cx42_dma_descriptor descriptor; + struct list_head list; +}; + +/* Universe Register Offsets */ +/* general PCI configuration registers */ +#define CA91CX42_PCI_ID 0x000 +#define CA91CX42_PCI_CSR 0x004 +#define CA91CX42_PCI_CLASS 0x008 +#define CA91CX42_PCI_MISC0 0x00C +#define CA91CX42_PCI_BS 0x010 +#define CA91CX42_PCI_MISC1 0x03C + +#define LSI0_CTL 0x0100 +#define LSI0_BS 0x0104 +#define LSI0_BD 0x0108 +#define LSI0_TO 0x010C + +#define LSI1_CTL 0x0114 +#define LSI1_BS 0x0118 +#define LSI1_BD 0x011C +#define LSI1_TO 0x0120 + +#define LSI2_CTL 0x0128 +#define LSI2_BS 0x012C +#define LSI2_BD 0x0130 +#define LSI2_TO 0x0134 + +#define LSI3_CTL 0x013C +#define LSI3_BS 0x0140 +#define LSI3_BD 0x0144 +#define LSI3_TO 0x0148 + +#define LSI4_CTL 0x01A0 +#define LSI4_BS 0x01A4 +#define LSI4_BD 0x01A8 +#define LSI4_TO 0x01AC + +#define LSI5_CTL 0x01B4 +#define LSI5_BS 0x01B8 +#define LSI5_BD 0x01BC +#define LSI5_TO 0x01C0 + +#define LSI6_CTL 0x01C8 +#define LSI6_BS 0x01CC +#define LSI6_BD 0x01D0 +#define LSI6_TO 0x01D4 + +#define LSI7_CTL 0x01DC +#define LSI7_BS 0x01E0 +#define LSI7_BD 0x01E4 +#define LSI7_TO 0x01E8 + +static const int CA91CX42_LSI_CTL[] = { LSI0_CTL, LSI1_CTL, LSI2_CTL, LSI3_CTL, + LSI4_CTL, LSI5_CTL, LSI6_CTL, LSI7_CTL }; + +static const int CA91CX42_LSI_BS[] = { LSI0_BS, LSI1_BS, LSI2_BS, LSI3_BS, + LSI4_BS, LSI5_BS, LSI6_BS, LSI7_BS }; + +static const int CA91CX42_LSI_BD[] = { LSI0_BD, LSI1_BD, LSI2_BD, LSI3_BD, + LSI4_BD, LSI5_BD, LSI6_BD, LSI7_BD }; + +static const int CA91CX42_LSI_TO[] = { LSI0_TO, LSI1_TO, LSI2_TO, LSI3_TO, + LSI4_TO, LSI5_TO, LSI6_TO, LSI7_TO }; + +#define SCYC_CTL 0x0170 +#define SCYC_ADDR 0x0174 +#define SCYC_EN 0x0178 +#define SCYC_CMP 0x017C +#define SCYC_SWP 0x0180 +#define LMISC 0x0184 +#define SLSI 0x0188 +#define L_CMDERR 0x018C +#define LAERR 0x0190 + +#define DCTL 0x0200 +#define DTBC 0x0204 +#define DLA 0x0208 +#define DVA 0x0210 +#define DCPP 0x0218 +#define DGCS 0x0220 +#define D_LLUE 0x0224 + +#define LINT_EN 0x0300 +#define LINT_STAT 0x0304 +#define LINT_MAP0 0x0308 +#define LINT_MAP1 0x030C +#define VINT_EN 0x0310 +#define VINT_STAT 0x0314 +#define VINT_MAP0 0x0318 +#define VINT_MAP1 0x031C +#define STATID 0x0320 + +#define V1_STATID 0x0324 +#define V2_STATID 0x0328 +#define V3_STATID 0x032C +#define V4_STATID 0x0330 +#define V5_STATID 0x0334 +#define V6_STATID 0x0338 +#define V7_STATID 0x033C + +static const int CA91CX42_V_STATID[8] = { 0, V1_STATID, V2_STATID, V3_STATID, + V4_STATID, V5_STATID, V6_STATID, + V7_STATID }; + +#define LINT_MAP2 0x0340 +#define VINT_MAP2 0x0344 + +#define MBOX0 0x0348 +#define MBOX1 0x034C +#define MBOX2 0x0350 +#define MBOX3 0x0354 +#define SEMA0 0x0358 +#define SEMA1 0x035C + +#define MAST_CTL 0x0400 +#define MISC_CTL 0x0404 +#define MISC_STAT 0x0408 +#define USER_AM 0x040C + +#define VSI0_CTL 0x0F00 +#define VSI0_BS 0x0F04 +#define VSI0_BD 0x0F08 +#define VSI0_TO 0x0F0C + +#define VSI1_CTL 0x0F14 +#define VSI1_BS 0x0F18 +#define VSI1_BD 0x0F1C +#define VSI1_TO 0x0F20 + +#define VSI2_CTL 0x0F28 +#define VSI2_BS 0x0F2C +#define VSI2_BD 0x0F30 +#define VSI2_TO 0x0F34 + +#define VSI3_CTL 0x0F3C +#define VSI3_BS 0x0F40 +#define VSI3_BD 0x0F44 +#define VSI3_TO 0x0F48 + +#define LM_CTL 0x0F64 +#define LM_BS 0x0F68 + +#define VRAI_CTL 0x0F70 + +#define VRAI_BS 0x0F74 +#define VCSR_CTL 0x0F80 +#define VCSR_TO 0x0F84 +#define V_AMERR 0x0F88 +#define VAERR 0x0F8C + +#define VSI4_CTL 0x0F90 +#define VSI4_BS 0x0F94 +#define VSI4_BD 0x0F98 +#define VSI4_TO 0x0F9C + +#define VSI5_CTL 0x0FA4 +#define VSI5_BS 0x0FA8 +#define VSI5_BD 0x0FAC +#define VSI5_TO 0x0FB0 + +#define VSI6_CTL 0x0FB8 +#define VSI6_BS 0x0FBC +#define VSI6_BD 0x0FC0 +#define VSI6_TO 0x0FC4 + +#define VSI7_CTL 0x0FCC +#define VSI7_BS 0x0FD0 +#define VSI7_BD 0x0FD4 +#define VSI7_TO 0x0FD8 + +static const int CA91CX42_VSI_CTL[] = { VSI0_CTL, VSI1_CTL, VSI2_CTL, VSI3_CTL, + VSI4_CTL, VSI5_CTL, VSI6_CTL, VSI7_CTL }; + +static const int CA91CX42_VSI_BS[] = { VSI0_BS, VSI1_BS, VSI2_BS, VSI3_BS, + VSI4_BS, VSI5_BS, VSI6_BS, VSI7_BS }; + +static const int CA91CX42_VSI_BD[] = { VSI0_BD, VSI1_BD, VSI2_BD, VSI3_BD, + VSI4_BD, VSI5_BD, VSI6_BD, VSI7_BD }; + +static const int CA91CX42_VSI_TO[] = { VSI0_TO, VSI1_TO, VSI2_TO, VSI3_TO, + VSI4_TO, VSI5_TO, VSI6_TO, VSI7_TO }; + +#define VCSR_CLR 0x0FF4 +#define VCSR_SET 0x0FF8 +#define VCSR_BS 0x0FFC + +/* + * PCI Class Register + * offset 008 + */ +#define CA91CX42_BM_PCI_CLASS_BASE 0xFF000000 +#define CA91CX42_OF_PCI_CLASS_BASE 24 +#define CA91CX42_BM_PCI_CLASS_SUB 0x00FF0000 +#define CA91CX42_OF_PCI_CLASS_SUB 16 +#define CA91CX42_BM_PCI_CLASS_PROG 0x0000FF00 +#define CA91CX42_OF_PCI_CLASS_PROG 8 +#define CA91CX42_BM_PCI_CLASS_RID 0x000000FF +#define CA91CX42_OF_PCI_CLASS_RID 0 + +#define CA91CX42_OF_PCI_CLASS_RID_UNIVERSE_I 0 +#define CA91CX42_OF_PCI_CLASS_RID_UNIVERSE_II 1 + +/* + * PCI Misc Register + * offset 00C + */ +#define CA91CX42_BM_PCI_MISC0_BISTC 0x80000000 +#define CA91CX42_BM_PCI_MISC0_SBIST 0x60000000 +#define CA91CX42_BM_PCI_MISC0_CCODE 0x0F000000 +#define CA91CX42_BM_PCI_MISC0_MFUNCT 0x00800000 +#define CA91CX42_BM_PCI_MISC0_LAYOUT 0x007F0000 +#define CA91CX42_BM_PCI_MISC0_LTIMER 0x0000FF00 +#define CA91CX42_OF_PCI_MISC0_LTIMER 8 + + +/* + * LSI Control Register + * offset 100 + */ +#define CA91CX42_LSI_CTL_EN (1<<31) +#define CA91CX42_LSI_CTL_PWEN (1<<30) + +#define CA91CX42_LSI_CTL_VDW_M (3<<22) +#define CA91CX42_LSI_CTL_VDW_D8 0 +#define CA91CX42_LSI_CTL_VDW_D16 (1<<22) +#define CA91CX42_LSI_CTL_VDW_D32 (1<<23) +#define CA91CX42_LSI_CTL_VDW_D64 (3<<22) + +#define CA91CX42_LSI_CTL_VAS_M (7<<16) +#define CA91CX42_LSI_CTL_VAS_A16 0 +#define CA91CX42_LSI_CTL_VAS_A24 (1<<16) +#define CA91CX42_LSI_CTL_VAS_A32 (1<<17) +#define CA91CX42_LSI_CTL_VAS_CRCSR (5<<16) +#define CA91CX42_LSI_CTL_VAS_USER1 (3<<17) +#define CA91CX42_LSI_CTL_VAS_USER2 (7<<16) + +#define CA91CX42_LSI_CTL_PGM_M (1<<14) +#define CA91CX42_LSI_CTL_PGM_DATA 0 +#define CA91CX42_LSI_CTL_PGM_PGM (1<<14) + +#define CA91CX42_LSI_CTL_SUPER_M (1<<12) +#define CA91CX42_LSI_CTL_SUPER_NPRIV 0 +#define CA91CX42_LSI_CTL_SUPER_SUPR (1<<12) + +#define CA91CX42_LSI_CTL_VCT_M (1<<8) +#define CA91CX42_LSI_CTL_VCT_BLT (1<<8) +#define CA91CX42_LSI_CTL_VCT_MBLT (1<<8) +#define CA91CX42_LSI_CTL_LAS (1<<0) + +/* + * SCYC_CTL Register + * offset 178 + */ +#define CA91CX42_SCYC_CTL_LAS_PCIMEM 0 +#define CA91CX42_SCYC_CTL_LAS_PCIIO (1<<2) + +#define CA91CX42_SCYC_CTL_CYC_M (3<<0) +#define CA91CX42_SCYC_CTL_CYC_RMW (1<<0) +#define CA91CX42_SCYC_CTL_CYC_ADOH (1<<1) + +/* + * LMISC Register + * offset 184 + */ +#define CA91CX42_BM_LMISC_CRT 0xF0000000 +#define CA91CX42_OF_LMISC_CRT 28 +#define CA91CX42_BM_LMISC_CWT 0x0F000000 +#define CA91CX42_OF_LMISC_CWT 24 + +/* + * SLSI Register + * offset 188 + */ +#define CA91CX42_BM_SLSI_EN 0x80000000 +#define CA91CX42_BM_SLSI_PWEN 0x40000000 +#define CA91CX42_BM_SLSI_VDW 0x00F00000 +#define CA91CX42_OF_SLSI_VDW 20 +#define CA91CX42_BM_SLSI_PGM 0x0000F000 +#define CA91CX42_OF_SLSI_PGM 12 +#define CA91CX42_BM_SLSI_SUPER 0x00000F00 +#define CA91CX42_OF_SLSI_SUPER 8 +#define CA91CX42_BM_SLSI_BS 0x000000F6 +#define CA91CX42_OF_SLSI_BS 2 +#define CA91CX42_BM_SLSI_LAS 0x00000003 +#define CA91CX42_OF_SLSI_LAS 0 +#define CA91CX42_BM_SLSI_RESERVED 0x3F0F0000 + +/* + * DCTL Register + * offset 200 + */ +#define CA91CX42_DCTL_L2V (1<<31) +#define CA91CX42_DCTL_VDW_M (3<<22) +#define CA91CX42_DCTL_VDW_M (3<<22) +#define CA91CX42_DCTL_VDW_D8 0 +#define CA91CX42_DCTL_VDW_D16 (1<<22) +#define CA91CX42_DCTL_VDW_D32 (1<<23) +#define CA91CX42_DCTL_VDW_D64 (3<<22) + +#define CA91CX42_DCTL_VAS_M (7<<16) +#define CA91CX42_DCTL_VAS_A16 0 +#define CA91CX42_DCTL_VAS_A24 (1<<16) +#define CA91CX42_DCTL_VAS_A32 (1<<17) +#define CA91CX42_DCTL_VAS_USER1 (3<<17) +#define CA91CX42_DCTL_VAS_USER2 (7<<16) + +#define CA91CX42_DCTL_PGM_M (1<<14) +#define CA91CX42_DCTL_PGM_DATA 0 +#define CA91CX42_DCTL_PGM_PGM (1<<14) + +#define CA91CX42_DCTL_SUPER_M (1<<12) +#define CA91CX42_DCTL_SUPER_NPRIV 0 +#define CA91CX42_DCTL_SUPER_SUPR (1<<12) + +#define CA91CX42_DCTL_VCT_M (1<<8) +#define CA91CX42_DCTL_VCT_BLT (1<<8) +#define CA91CX42_DCTL_LD64EN (1<<7) + +/* + * DCPP Register + * offset 218 + */ +#define CA91CX42_DCPP_M 0xf +#define CA91CX42_DCPP_NULL (1<<0) + +/* + * DMA General Control/Status Register (DGCS) + * offset 220 + */ +#define CA91CX42_DGCS_GO (1<<31) +#define CA91CX42_DGCS_STOP_REQ (1<<30) +#define CA91CX42_DGCS_HALT_REQ (1<<29) +#define CA91CX42_DGCS_CHAIN (1<<27) + +#define CA91CX42_DGCS_VON_M (7<<20) + +#define CA91CX42_DGCS_VOFF_M (0xf<<16) + +#define CA91CX42_DGCS_ACT (1<<15) +#define CA91CX42_DGCS_STOP (1<<14) +#define CA91CX42_DGCS_HALT (1<<13) +#define CA91CX42_DGCS_DONE (1<<11) +#define CA91CX42_DGCS_LERR (1<<10) +#define CA91CX42_DGCS_VERR (1<<9) +#define CA91CX42_DGCS_PERR (1<<8) +#define CA91CX42_DGCS_INT_STOP (1<<6) +#define CA91CX42_DGCS_INT_HALT (1<<5) +#define CA91CX42_DGCS_INT_DONE (1<<3) +#define CA91CX42_DGCS_INT_LERR (1<<2) +#define CA91CX42_DGCS_INT_VERR (1<<1) +#define CA91CX42_DGCS_INT_PERR (1<<0) + +/* + * PCI Interrupt Enable Register + * offset 300 + */ +#define CA91CX42_LINT_LM3 0x00800000 +#define CA91CX42_LINT_LM2 0x00400000 +#define CA91CX42_LINT_LM1 0x00200000 +#define CA91CX42_LINT_LM0 0x00100000 +#define CA91CX42_LINT_MBOX3 0x00080000 +#define CA91CX42_LINT_MBOX2 0x00040000 +#define CA91CX42_LINT_MBOX1 0x00020000 +#define CA91CX42_LINT_MBOX0 0x00010000 +#define CA91CX42_LINT_ACFAIL 0x00008000 +#define CA91CX42_LINT_SYSFAIL 0x00004000 +#define CA91CX42_LINT_SW_INT 0x00002000 +#define CA91CX42_LINT_SW_IACK 0x00001000 + +#define CA91CX42_LINT_VERR 0x00000400 +#define CA91CX42_LINT_LERR 0x00000200 +#define CA91CX42_LINT_DMA 0x00000100 +#define CA91CX42_LINT_VIRQ7 0x00000080 +#define CA91CX42_LINT_VIRQ6 0x00000040 +#define CA91CX42_LINT_VIRQ5 0x00000020 +#define CA91CX42_LINT_VIRQ4 0x00000010 +#define CA91CX42_LINT_VIRQ3 0x00000008 +#define CA91CX42_LINT_VIRQ2 0x00000004 +#define CA91CX42_LINT_VIRQ1 0x00000002 +#define CA91CX42_LINT_VOWN 0x00000001 + +static const int CA91CX42_LINT_VIRQ[] = { 0, CA91CX42_LINT_VIRQ1, + CA91CX42_LINT_VIRQ2, CA91CX42_LINT_VIRQ3, + CA91CX42_LINT_VIRQ4, CA91CX42_LINT_VIRQ5, + CA91CX42_LINT_VIRQ6, CA91CX42_LINT_VIRQ7 }; + +#define CA91CX42_LINT_MBOX 0x000F0000 + +static const int CA91CX42_LINT_LM[] = { CA91CX42_LINT_LM0, CA91CX42_LINT_LM1, + CA91CX42_LINT_LM2, CA91CX42_LINT_LM3 }; + +/* + * MAST_CTL Register + * offset 400 + */ +#define CA91CX42_BM_MAST_CTL_MAXRTRY 0xF0000000 +#define CA91CX42_OF_MAST_CTL_MAXRTRY 28 +#define CA91CX42_BM_MAST_CTL_PWON 0x0F000000 +#define CA91CX42_OF_MAST_CTL_PWON 24 +#define CA91CX42_BM_MAST_CTL_VRL 0x00C00000 +#define CA91CX42_OF_MAST_CTL_VRL 22 +#define CA91CX42_BM_MAST_CTL_VRM 0x00200000 +#define CA91CX42_BM_MAST_CTL_VREL 0x00100000 +#define CA91CX42_BM_MAST_CTL_VOWN 0x00080000 +#define CA91CX42_BM_MAST_CTL_VOWN_ACK 0x00040000 +#define CA91CX42_BM_MAST_CTL_PABS 0x00001000 +#define CA91CX42_BM_MAST_CTL_BUS_NO 0x0000000F +#define CA91CX42_OF_MAST_CTL_BUS_NO 0 + +/* + * MISC_CTL Register + * offset 404 + */ +#define CA91CX42_MISC_CTL_VBTO 0xF0000000 +#define CA91CX42_MISC_CTL_VARB 0x04000000 +#define CA91CX42_MISC_CTL_VARBTO 0x03000000 +#define CA91CX42_MISC_CTL_SW_LRST 0x00800000 +#define CA91CX42_MISC_CTL_SW_SRST 0x00400000 +#define CA91CX42_MISC_CTL_BI 0x00100000 +#define CA91CX42_MISC_CTL_ENGBI 0x00080000 +#define CA91CX42_MISC_CTL_RESCIND 0x00040000 +#define CA91CX42_MISC_CTL_SYSCON 0x00020000 +#define CA91CX42_MISC_CTL_V64AUTO 0x00010000 +#define CA91CX42_MISC_CTL_RESERVED 0x0820FFFF + +#define CA91CX42_OF_MISC_CTL_VARBTO 24 +#define CA91CX42_OF_MISC_CTL_VBTO 28 + +/* + * MISC_STAT Register + * offset 408 + */ +#define CA91CX42_BM_MISC_STAT_ENDIAN 0x80000000 +#define CA91CX42_BM_MISC_STAT_LCLSIZE 0x40000000 +#define CA91CX42_BM_MISC_STAT_DY4AUTO 0x08000000 +#define CA91CX42_BM_MISC_STAT_MYBBSY 0x00200000 +#define CA91CX42_BM_MISC_STAT_DY4DONE 0x00080000 +#define CA91CX42_BM_MISC_STAT_TXFE 0x00040000 +#define CA91CX42_BM_MISC_STAT_RXFE 0x00020000 +#define CA91CX42_BM_MISC_STAT_DY4AUTOID 0x0000FF00 +#define CA91CX42_OF_MISC_STAT_DY4AUTOID 8 + +/* + * VSI Control Register + * offset F00 + */ +#define CA91CX42_VSI_CTL_EN (1<<31) +#define CA91CX42_VSI_CTL_PWEN (1<<30) +#define CA91CX42_VSI_CTL_PREN (1<<29) + +#define CA91CX42_VSI_CTL_PGM_M (3<<22) +#define CA91CX42_VSI_CTL_PGM_DATA (1<<22) +#define CA91CX42_VSI_CTL_PGM_PGM (1<<23) + +#define CA91CX42_VSI_CTL_SUPER_M (3<<20) +#define CA91CX42_VSI_CTL_SUPER_NPRIV (1<<20) +#define CA91CX42_VSI_CTL_SUPER_SUPR (1<<21) + +#define CA91CX42_VSI_CTL_VAS_M (7<<16) +#define CA91CX42_VSI_CTL_VAS_A16 0 +#define CA91CX42_VSI_CTL_VAS_A24 (1<<16) +#define CA91CX42_VSI_CTL_VAS_A32 (1<<17) +#define CA91CX42_VSI_CTL_VAS_USER1 (3<<17) +#define CA91CX42_VSI_CTL_VAS_USER2 (7<<16) + +#define CA91CX42_VSI_CTL_LD64EN (1<<7) +#define CA91CX42_VSI_CTL_LLRMW (1<<6) + +#define CA91CX42_VSI_CTL_LAS_M (3<<0) +#define CA91CX42_VSI_CTL_LAS_PCI_MS 0 +#define CA91CX42_VSI_CTL_LAS_PCI_IO (1<<0) +#define CA91CX42_VSI_CTL_LAS_PCI_CONF (1<<1) + +/* LM_CTL Register + * offset F64 + */ +#define CA91CX42_LM_CTL_EN (1<<31) +#define CA91CX42_LM_CTL_PGM (1<<23) +#define CA91CX42_LM_CTL_DATA (1<<22) +#define CA91CX42_LM_CTL_SUPR (1<<21) +#define CA91CX42_LM_CTL_NPRIV (1<<20) +#define CA91CX42_LM_CTL_AS_M (5<<16) +#define CA91CX42_LM_CTL_AS_A16 0 +#define CA91CX42_LM_CTL_AS_A24 (1<<16) +#define CA91CX42_LM_CTL_AS_A32 (1<<17) + +/* + * VRAI_CTL Register + * offset F70 + */ +#define CA91CX42_BM_VRAI_CTL_EN 0x80000000 +#define CA91CX42_BM_VRAI_CTL_PGM 0x00C00000 +#define CA91CX42_OF_VRAI_CTL_PGM 22 +#define CA91CX42_BM_VRAI_CTL_SUPER 0x00300000 +#define CA91CX42_OF_VRAI_CTL_SUPER 20 +#define CA91CX42_BM_VRAI_CTL_VAS 0x00030000 +#define CA91CX42_OF_VRAI_CTL_VAS 16 + +/* VCSR_CTL Register + * offset F80 + */ +#define CA91CX42_VCSR_CTL_EN (1<<31) + +#define CA91CX42_VCSR_CTL_LAS_M (3<<0) +#define CA91CX42_VCSR_CTL_LAS_PCI_MS 0 +#define CA91CX42_VCSR_CTL_LAS_PCI_IO (1<<0) +#define CA91CX42_VCSR_CTL_LAS_PCI_CONF (1<<1) + +/* VCSR_BS Register + * offset FFC + */ +#define CA91CX42_VCSR_BS_SLOT_M (0x1F<<27) + +#endif /* _CA91CX42_H */ diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c new file mode 100644 index 0000000..081e9c4 --- /dev/null +++ b/drivers/vme/bridges/vme_tsi148.c @@ -0,0 +1,2691 @@ +/* + * Support for the Tundra TSI148 VME-PCI Bridge Chip + * + * Author: Martyn Welch <martyn.welch@ge.com> + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * Based on work by Tom Armistead and Ajit Prem + * Copyright 2004 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mm.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/proc_fs.h> +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/byteorder/generic.h> +#include <linux/vme.h> + +#include "../vme_bridge.h" +#include "vme_tsi148.h" + +static int __init tsi148_init(void); +static int tsi148_probe(struct pci_dev *, const struct pci_device_id *); +static void tsi148_remove(struct pci_dev *); +static void __exit tsi148_exit(void); + + +/* Module parameter */ +static bool err_chk; +static int geoid; + +static const char driver_name[] = "vme_tsi148"; + +static DEFINE_PCI_DEVICE_TABLE(tsi148_ids) = { + { PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_TSI148) }, + { }, +}; + +static struct pci_driver tsi148_driver = { + .name = driver_name, + .id_table = tsi148_ids, + .probe = tsi148_probe, + .remove = tsi148_remove, +}; + +static void reg_join(unsigned int high, unsigned int low, + unsigned long long *variable) +{ + *variable = (unsigned long long)high << 32; + *variable |= (unsigned long long)low; +} + +static void reg_split(unsigned long long variable, unsigned int *high, + unsigned int *low) +{ + *low = (unsigned int)variable & 0xFFFFFFFF; + *high = (unsigned int)(variable >> 32); +} + +/* + * Wakes up DMA queue. + */ +static u32 tsi148_DMA_irqhandler(struct tsi148_driver *bridge, + int channel_mask) +{ + u32 serviced = 0; + + if (channel_mask & TSI148_LCSR_INTS_DMA0S) { + wake_up(&bridge->dma_queue[0]); + serviced |= TSI148_LCSR_INTC_DMA0C; + } + if (channel_mask & TSI148_LCSR_INTS_DMA1S) { + wake_up(&bridge->dma_queue[1]); + serviced |= TSI148_LCSR_INTC_DMA1C; + } + + return serviced; +} + +/* + * Wake up location monitor queue + */ +static u32 tsi148_LM_irqhandler(struct tsi148_driver *bridge, u32 stat) +{ + int i; + u32 serviced = 0; + + for (i = 0; i < 4; i++) { + if (stat & TSI148_LCSR_INTS_LMS[i]) { + /* We only enable interrupts if the callback is set */ + bridge->lm_callback[i](i); + serviced |= TSI148_LCSR_INTC_LMC[i]; + } + } + + return serviced; +} + +/* + * Wake up mail box queue. + * + * XXX This functionality is not exposed up though API. + */ +static u32 tsi148_MB_irqhandler(struct vme_bridge *tsi148_bridge, u32 stat) +{ + int i; + u32 val; + u32 serviced = 0; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + for (i = 0; i < 4; i++) { + if (stat & TSI148_LCSR_INTS_MBS[i]) { + val = ioread32be(bridge->base + TSI148_GCSR_MBOX[i]); + dev_err(tsi148_bridge->parent, "VME Mailbox %d received" + ": 0x%x\n", i, val); + serviced |= TSI148_LCSR_INTC_MBC[i]; + } + } + + return serviced; +} + +/* + * Display error & status message when PERR (PCI) exception interrupt occurs. + */ +static u32 tsi148_PERR_irqhandler(struct vme_bridge *tsi148_bridge) +{ + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + dev_err(tsi148_bridge->parent, "PCI Exception at address: 0x%08x:%08x, " + "attributes: %08x\n", + ioread32be(bridge->base + TSI148_LCSR_EDPAU), + ioread32be(bridge->base + TSI148_LCSR_EDPAL), + ioread32be(bridge->base + TSI148_LCSR_EDPAT)); + + dev_err(tsi148_bridge->parent, "PCI-X attribute reg: %08x, PCI-X split " + "completion reg: %08x\n", + ioread32be(bridge->base + TSI148_LCSR_EDPXA), + ioread32be(bridge->base + TSI148_LCSR_EDPXS)); + + iowrite32be(TSI148_LCSR_EDPAT_EDPCL, bridge->base + TSI148_LCSR_EDPAT); + + return TSI148_LCSR_INTC_PERRC; +} + +/* + * Save address and status when VME error interrupt occurs. + */ +static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge) +{ + unsigned int error_addr_high, error_addr_low; + unsigned long long error_addr; + u32 error_attrib; + struct vme_bus_error *error; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + error_addr_high = ioread32be(bridge->base + TSI148_LCSR_VEAU); + error_addr_low = ioread32be(bridge->base + TSI148_LCSR_VEAL); + error_attrib = ioread32be(bridge->base + TSI148_LCSR_VEAT); + + reg_join(error_addr_high, error_addr_low, &error_addr); + + /* Check for exception register overflow (we have lost error data) */ + if (error_attrib & TSI148_LCSR_VEAT_VEOF) { + dev_err(tsi148_bridge->parent, "VME Bus Exception Overflow " + "Occurred\n"); + } + + error = kmalloc(sizeof(struct vme_bus_error), GFP_ATOMIC); + if (error) { + error->address = error_addr; + error->attributes = error_attrib; + list_add_tail(&error->list, &tsi148_bridge->vme_errors); + } else { + dev_err(tsi148_bridge->parent, "Unable to alloc memory for " + "VMEbus Error reporting\n"); + dev_err(tsi148_bridge->parent, "VME Bus Error at address: " + "0x%llx, attributes: %08x\n", error_addr, error_attrib); + } + + /* Clear Status */ + iowrite32be(TSI148_LCSR_VEAT_VESCL, bridge->base + TSI148_LCSR_VEAT); + + return TSI148_LCSR_INTC_VERRC; +} + +/* + * Wake up IACK queue. + */ +static u32 tsi148_IACK_irqhandler(struct tsi148_driver *bridge) +{ + wake_up(&bridge->iack_queue); + + return TSI148_LCSR_INTC_IACKC; +} + +/* + * Calling VME bus interrupt callback if provided. + */ +static u32 tsi148_VIRQ_irqhandler(struct vme_bridge *tsi148_bridge, + u32 stat) +{ + int vec, i, serviced = 0; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + for (i = 7; i > 0; i--) { + if (stat & (1 << i)) { + /* + * Note: Even though the registers are defined as + * 32-bits in the spec, we only want to issue 8-bit + * IACK cycles on the bus, read from offset 3. + */ + vec = ioread8(bridge->base + TSI148_LCSR_VIACK[i] + 3); + + vme_irq_handler(tsi148_bridge, i, vec); + + serviced |= (1 << i); + } + } + + return serviced; +} + +/* + * Top level interrupt handler. Clears appropriate interrupt status bits and + * then calls appropriate sub handler(s). + */ +static irqreturn_t tsi148_irqhandler(int irq, void *ptr) +{ + u32 stat, enable, serviced = 0; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = ptr; + + bridge = tsi148_bridge->driver_priv; + + /* Determine which interrupts are unmasked and set */ + enable = ioread32be(bridge->base + TSI148_LCSR_INTEO); + stat = ioread32be(bridge->base + TSI148_LCSR_INTS); + + /* Only look at unmasked interrupts */ + stat &= enable; + + if (unlikely(!stat)) + return IRQ_NONE; + + /* Call subhandlers as appropriate */ + /* DMA irqs */ + if (stat & (TSI148_LCSR_INTS_DMA1S | TSI148_LCSR_INTS_DMA0S)) + serviced |= tsi148_DMA_irqhandler(bridge, stat); + + /* Location monitor irqs */ + if (stat & (TSI148_LCSR_INTS_LM3S | TSI148_LCSR_INTS_LM2S | + TSI148_LCSR_INTS_LM1S | TSI148_LCSR_INTS_LM0S)) + serviced |= tsi148_LM_irqhandler(bridge, stat); + + /* Mail box irqs */ + if (stat & (TSI148_LCSR_INTS_MB3S | TSI148_LCSR_INTS_MB2S | + TSI148_LCSR_INTS_MB1S | TSI148_LCSR_INTS_MB0S)) + serviced |= tsi148_MB_irqhandler(tsi148_bridge, stat); + + /* PCI bus error */ + if (stat & TSI148_LCSR_INTS_PERRS) + serviced |= tsi148_PERR_irqhandler(tsi148_bridge); + + /* VME bus error */ + if (stat & TSI148_LCSR_INTS_VERRS) + serviced |= tsi148_VERR_irqhandler(tsi148_bridge); + + /* IACK irq */ + if (stat & TSI148_LCSR_INTS_IACKS) + serviced |= tsi148_IACK_irqhandler(bridge); + + /* VME bus irqs */ + if (stat & (TSI148_LCSR_INTS_IRQ7S | TSI148_LCSR_INTS_IRQ6S | + TSI148_LCSR_INTS_IRQ5S | TSI148_LCSR_INTS_IRQ4S | + TSI148_LCSR_INTS_IRQ3S | TSI148_LCSR_INTS_IRQ2S | + TSI148_LCSR_INTS_IRQ1S)) + serviced |= tsi148_VIRQ_irqhandler(tsi148_bridge, stat); + + /* Clear serviced interrupts */ + iowrite32be(serviced, bridge->base + TSI148_LCSR_INTC); + + return IRQ_HANDLED; +} + +static int tsi148_irq_init(struct vme_bridge *tsi148_bridge) +{ + int result; + unsigned int tmp; + struct pci_dev *pdev; + struct tsi148_driver *bridge; + + pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev); + + bridge = tsi148_bridge->driver_priv; + + /* Initialise list for VME bus errors */ + INIT_LIST_HEAD(&tsi148_bridge->vme_errors); + + mutex_init(&tsi148_bridge->irq_mtx); + + result = request_irq(pdev->irq, + tsi148_irqhandler, + IRQF_SHARED, + driver_name, tsi148_bridge); + if (result) { + dev_err(tsi148_bridge->parent, "Can't get assigned pci irq " + "vector %02X\n", pdev->irq); + return result; + } + + /* Enable and unmask interrupts */ + tmp = TSI148_LCSR_INTEO_DMA1EO | TSI148_LCSR_INTEO_DMA0EO | + TSI148_LCSR_INTEO_MB3EO | TSI148_LCSR_INTEO_MB2EO | + TSI148_LCSR_INTEO_MB1EO | TSI148_LCSR_INTEO_MB0EO | + TSI148_LCSR_INTEO_PERREO | TSI148_LCSR_INTEO_VERREO | + TSI148_LCSR_INTEO_IACKEO; + + /* This leaves the following interrupts masked. + * TSI148_LCSR_INTEO_VIEEO + * TSI148_LCSR_INTEO_SYSFLEO + * TSI148_LCSR_INTEO_ACFLEO + */ + + /* Don't enable Location Monitor interrupts here - they will be + * enabled when the location monitors are properly configured and + * a callback has been attached. + * TSI148_LCSR_INTEO_LM0EO + * TSI148_LCSR_INTEO_LM1EO + * TSI148_LCSR_INTEO_LM2EO + * TSI148_LCSR_INTEO_LM3EO + */ + + /* Don't enable VME interrupts until we add a handler, else the board + * will respond to it and we don't want that unless it knows how to + * properly deal with it. + * TSI148_LCSR_INTEO_IRQ7EO + * TSI148_LCSR_INTEO_IRQ6EO + * TSI148_LCSR_INTEO_IRQ5EO + * TSI148_LCSR_INTEO_IRQ4EO + * TSI148_LCSR_INTEO_IRQ3EO + * TSI148_LCSR_INTEO_IRQ2EO + * TSI148_LCSR_INTEO_IRQ1EO + */ + + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); + + return 0; +} + +static void tsi148_irq_exit(struct vme_bridge *tsi148_bridge, + struct pci_dev *pdev) +{ + struct tsi148_driver *bridge = tsi148_bridge->driver_priv; + + /* Turn off interrupts */ + iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEO); + iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEN); + + /* Clear all interrupts */ + iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_INTC); + + /* Detach interrupt handler */ + free_irq(pdev->irq, tsi148_bridge); +} + +/* + * Check to see if an IACk has been received, return true (1) or false (0). + */ +static int tsi148_iack_received(struct tsi148_driver *bridge) +{ + u32 tmp; + + tmp = ioread32be(bridge->base + TSI148_LCSR_VICR); + + if (tmp & TSI148_LCSR_VICR_IRQS) + return 0; + else + return 1; +} + +/* + * Configure VME interrupt + */ +static void tsi148_irq_set(struct vme_bridge *tsi148_bridge, int level, + int state, int sync) +{ + struct pci_dev *pdev; + u32 tmp; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + /* We need to do the ordering differently for enabling and disabling */ + if (state == 0) { + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); + tmp &= ~TSI148_LCSR_INTEN_IRQEN[level - 1]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); + + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); + tmp &= ~TSI148_LCSR_INTEO_IRQEO[level - 1]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + + if (sync != 0) { + pdev = container_of(tsi148_bridge->parent, + struct pci_dev, dev); + + synchronize_irq(pdev->irq); + } + } else { + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); + tmp |= TSI148_LCSR_INTEO_IRQEO[level - 1]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); + tmp |= TSI148_LCSR_INTEN_IRQEN[level - 1]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); + } +} + +/* + * Generate a VME bus interrupt at the requested level & vector. Wait for + * interrupt to be acked. + */ +static int tsi148_irq_generate(struct vme_bridge *tsi148_bridge, int level, + int statid) +{ + u32 tmp; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + mutex_lock(&bridge->vme_int); + + /* Read VICR register */ + tmp = ioread32be(bridge->base + TSI148_LCSR_VICR); + + /* Set Status/ID */ + tmp = (tmp & ~TSI148_LCSR_VICR_STID_M) | + (statid & TSI148_LCSR_VICR_STID_M); + iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR); + + /* Assert VMEbus IRQ */ + tmp = tmp | TSI148_LCSR_VICR_IRQL[level]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR); + + /* XXX Consider implementing a timeout? */ + wait_event_interruptible(bridge->iack_queue, + tsi148_iack_received(bridge)); + + mutex_unlock(&bridge->vme_int); + + return 0; +} + +/* + * Find the first error in this address range + */ +static struct vme_bus_error *tsi148_find_error(struct vme_bridge *tsi148_bridge, + u32 aspace, unsigned long long address, size_t count) +{ + struct list_head *err_pos; + struct vme_bus_error *vme_err, *valid = NULL; + unsigned long long bound; + + bound = address + count; + + /* + * XXX We are currently not looking at the address space when parsing + * for errors. This is because parsing the Address Modifier Codes + * is going to be quite resource intensive to do properly. We + * should be OK just looking at the addresses and this is certainly + * much better than what we had before. + */ + err_pos = NULL; + /* Iterate through errors */ + list_for_each(err_pos, &tsi148_bridge->vme_errors) { + vme_err = list_entry(err_pos, struct vme_bus_error, list); + if ((vme_err->address >= address) && + (vme_err->address < bound)) { + + valid = vme_err; + break; + } + } + + return valid; +} + +/* + * Clear errors in the provided address range. + */ +static void tsi148_clear_errors(struct vme_bridge *tsi148_bridge, + u32 aspace, unsigned long long address, size_t count) +{ + struct list_head *err_pos, *temp; + struct vme_bus_error *vme_err; + unsigned long long bound; + + bound = address + count; + + /* + * XXX We are currently not looking at the address space when parsing + * for errors. This is because parsing the Address Modifier Codes + * is going to be quite resource intensive to do properly. We + * should be OK just looking at the addresses and this is certainly + * much better than what we had before. + */ + err_pos = NULL; + /* Iterate through errors */ + list_for_each_safe(err_pos, temp, &tsi148_bridge->vme_errors) { + vme_err = list_entry(err_pos, struct vme_bus_error, list); + + if ((vme_err->address >= address) && + (vme_err->address < bound)) { + + list_del(err_pos); + kfree(vme_err); + } + } +} + +/* + * Initialize a slave window with the requested attributes. + */ +static int tsi148_slave_set(struct vme_slave_resource *image, int enabled, + unsigned long long vme_base, unsigned long long size, + dma_addr_t pci_base, u32 aspace, u32 cycle) +{ + unsigned int i, addr = 0, granularity = 0; + unsigned int temp_ctl = 0; + unsigned int vme_base_low, vme_base_high; + unsigned int vme_bound_low, vme_bound_high; + unsigned int pci_offset_low, pci_offset_high; + unsigned long long vme_bound, pci_offset; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = image->parent; + bridge = tsi148_bridge->driver_priv; + + i = image->number; + + switch (aspace) { + case VME_A16: + granularity = 0x10; + addr |= TSI148_LCSR_ITAT_AS_A16; + break; + case VME_A24: + granularity = 0x1000; + addr |= TSI148_LCSR_ITAT_AS_A24; + break; + case VME_A32: + granularity = 0x10000; + addr |= TSI148_LCSR_ITAT_AS_A32; + break; + case VME_A64: + granularity = 0x10000; + addr |= TSI148_LCSR_ITAT_AS_A64; + break; + case VME_CRCSR: + case VME_USER1: + case VME_USER2: + case VME_USER3: + case VME_USER4: + default: + dev_err(tsi148_bridge->parent, "Invalid address space\n"); + return -EINVAL; + break; + } + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_split(vme_base, &vme_base_high, &vme_base_low); + + /* + * Bound address is a valid address for the window, adjust + * accordingly + */ + vme_bound = vme_base + size - granularity; + reg_split(vme_bound, &vme_bound_high, &vme_bound_low); + pci_offset = (unsigned long long)pci_base - vme_base; + reg_split(pci_offset, &pci_offset_high, &pci_offset_low); + + if (vme_base_low & (granularity - 1)) { + dev_err(tsi148_bridge->parent, "Invalid VME base alignment\n"); + return -EINVAL; + } + if (vme_bound_low & (granularity - 1)) { + dev_err(tsi148_bridge->parent, "Invalid VME bound alignment\n"); + return -EINVAL; + } + if (pci_offset_low & (granularity - 1)) { + dev_err(tsi148_bridge->parent, "Invalid PCI Offset " + "alignment\n"); + return -EINVAL; + } + + /* Disable while we are mucking around */ + temp_ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + temp_ctl &= ~TSI148_LCSR_ITAT_EN; + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + /* Setup mapping */ + iowrite32be(vme_base_high, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAU); + iowrite32be(vme_base_low, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAL); + iowrite32be(vme_bound_high, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAU); + iowrite32be(vme_bound_low, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAL); + iowrite32be(pci_offset_high, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFU); + iowrite32be(pci_offset_low, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFL); + + /* Setup 2eSST speeds */ + temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M; + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_160; + break; + case VME_2eSST267: + temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_267; + break; + case VME_2eSST320: + temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + temp_ctl &= ~(0x1F << 7); + if (cycle & VME_BLT) + temp_ctl |= TSI148_LCSR_ITAT_BLT; + if (cycle & VME_MBLT) + temp_ctl |= TSI148_LCSR_ITAT_MBLT; + if (cycle & VME_2eVME) + temp_ctl |= TSI148_LCSR_ITAT_2eVME; + if (cycle & VME_2eSST) + temp_ctl |= TSI148_LCSR_ITAT_2eSST; + if (cycle & VME_2eSSTB) + temp_ctl |= TSI148_LCSR_ITAT_2eSSTB; + + /* Setup address space */ + temp_ctl &= ~TSI148_LCSR_ITAT_AS_M; + temp_ctl |= addr; + + temp_ctl &= ~0xF; + if (cycle & VME_SUPER) + temp_ctl |= TSI148_LCSR_ITAT_SUPR ; + if (cycle & VME_USER) + temp_ctl |= TSI148_LCSR_ITAT_NPRIV; + if (cycle & VME_PROG) + temp_ctl |= TSI148_LCSR_ITAT_PGM; + if (cycle & VME_DATA) + temp_ctl |= TSI148_LCSR_ITAT_DATA; + + /* Write ctl reg without enable */ + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + if (enabled) + temp_ctl |= TSI148_LCSR_ITAT_EN; + + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + return 0; +} + +/* + * Get slave window configuration. + */ +static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + dma_addr_t *pci_base, u32 *aspace, u32 *cycle) +{ + unsigned int i, granularity = 0, ctl = 0; + unsigned int vme_base_low, vme_base_high; + unsigned int vme_bound_low, vme_bound_high; + unsigned int pci_offset_low, pci_offset_high; + unsigned long long vme_bound, pci_offset; + struct tsi148_driver *bridge; + + bridge = image->parent->driver_priv; + + i = image->number; + + /* Read registers */ + ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + vme_base_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAU); + vme_base_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAL); + vme_bound_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAU); + vme_bound_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAL); + pci_offset_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFU); + pci_offset_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFL); + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_join(vme_base_high, vme_base_low, vme_base); + reg_join(vme_bound_high, vme_bound_low, &vme_bound); + reg_join(pci_offset_high, pci_offset_low, &pci_offset); + + *pci_base = (dma_addr_t)vme_base + pci_offset; + + *enabled = 0; + *aspace = 0; + *cycle = 0; + + if (ctl & TSI148_LCSR_ITAT_EN) + *enabled = 1; + + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A16) { + granularity = 0x10; + *aspace |= VME_A16; + } + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A24) { + granularity = 0x1000; + *aspace |= VME_A24; + } + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A32) { + granularity = 0x10000; + *aspace |= VME_A32; + } + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A64) { + granularity = 0x10000; + *aspace |= VME_A64; + } + + /* Need granularity before we set the size */ + *size = (unsigned long long)((vme_bound - *vme_base) + granularity); + + + if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_160) + *cycle |= VME_2eSST160; + if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_267) + *cycle |= VME_2eSST267; + if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_320) + *cycle |= VME_2eSST320; + + if (ctl & TSI148_LCSR_ITAT_BLT) + *cycle |= VME_BLT; + if (ctl & TSI148_LCSR_ITAT_MBLT) + *cycle |= VME_MBLT; + if (ctl & TSI148_LCSR_ITAT_2eVME) + *cycle |= VME_2eVME; + if (ctl & TSI148_LCSR_ITAT_2eSST) + *cycle |= VME_2eSST; + if (ctl & TSI148_LCSR_ITAT_2eSSTB) + *cycle |= VME_2eSSTB; + + if (ctl & TSI148_LCSR_ITAT_SUPR) + *cycle |= VME_SUPER; + if (ctl & TSI148_LCSR_ITAT_NPRIV) + *cycle |= VME_USER; + if (ctl & TSI148_LCSR_ITAT_PGM) + *cycle |= VME_PROG; + if (ctl & TSI148_LCSR_ITAT_DATA) + *cycle |= VME_DATA; + + return 0; +} + +/* + * Allocate and map PCI Resource + */ +static int tsi148_alloc_resource(struct vme_master_resource *image, + unsigned long long size) +{ + unsigned long long existing_size; + int retval = 0; + struct pci_dev *pdev; + struct vme_bridge *tsi148_bridge; + + tsi148_bridge = image->parent; + + pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev); + + existing_size = (unsigned long long)(image->bus_resource.end - + image->bus_resource.start); + + /* If the existing size is OK, return */ + if ((size != 0) && (existing_size == (size - 1))) + return 0; + + if (existing_size != 0) { + iounmap(image->kern_base); + image->kern_base = NULL; + kfree(image->bus_resource.name); + release_resource(&image->bus_resource); + memset(&image->bus_resource, 0, sizeof(struct resource)); + } + + /* Exit here if size is zero */ + if (size == 0) + return 0; + + if (image->bus_resource.name == NULL) { + image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC); + if (image->bus_resource.name == NULL) { + dev_err(tsi148_bridge->parent, "Unable to allocate " + "memory for resource name\n"); + retval = -ENOMEM; + goto err_name; + } + } + + sprintf((char *)image->bus_resource.name, "%s.%d", tsi148_bridge->name, + image->number); + + image->bus_resource.start = 0; + image->bus_resource.end = (unsigned long)size; + image->bus_resource.flags = IORESOURCE_MEM; + + retval = pci_bus_alloc_resource(pdev->bus, + &image->bus_resource, size, size, PCIBIOS_MIN_MEM, + 0, NULL, NULL); + if (retval) { + dev_err(tsi148_bridge->parent, "Failed to allocate mem " + "resource for window %d size 0x%lx start 0x%lx\n", + image->number, (unsigned long)size, + (unsigned long)image->bus_resource.start); + goto err_resource; + } + + image->kern_base = ioremap_nocache( + image->bus_resource.start, size); + if (image->kern_base == NULL) { + dev_err(tsi148_bridge->parent, "Failed to remap resource\n"); + retval = -ENOMEM; + goto err_remap; + } + + return 0; + +err_remap: + release_resource(&image->bus_resource); +err_resource: + kfree(image->bus_resource.name); + memset(&image->bus_resource, 0, sizeof(struct resource)); +err_name: + return retval; +} + +/* + * Free and unmap PCI Resource + */ +static void tsi148_free_resource(struct vme_master_resource *image) +{ + iounmap(image->kern_base); + image->kern_base = NULL; + release_resource(&image->bus_resource); + kfree(image->bus_resource.name); + memset(&image->bus_resource, 0, sizeof(struct resource)); +} + +/* + * Set the attributes of an outbound window. + */ +static int tsi148_master_set(struct vme_master_resource *image, int enabled, + unsigned long long vme_base, unsigned long long size, u32 aspace, + u32 cycle, u32 dwidth) +{ + int retval = 0; + unsigned int i; + unsigned int temp_ctl = 0; + unsigned int pci_base_low, pci_base_high; + unsigned int pci_bound_low, pci_bound_high; + unsigned int vme_offset_low, vme_offset_high; + unsigned long long pci_bound, vme_offset, pci_base; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = image->parent; + + bridge = tsi148_bridge->driver_priv; + + /* Verify input data */ + if (vme_base & 0xFFFF) { + dev_err(tsi148_bridge->parent, "Invalid VME Window " + "alignment\n"); + retval = -EINVAL; + goto err_window; + } + + if ((size == 0) && (enabled != 0)) { + dev_err(tsi148_bridge->parent, "Size must be non-zero for " + "enabled windows\n"); + retval = -EINVAL; + goto err_window; + } + + spin_lock(&image->lock); + + /* Let's allocate the resource here rather than further up the stack as + * it avoids pushing loads of bus dependent stuff up the stack. If size + * is zero, any existing resource will be freed. + */ + retval = tsi148_alloc_resource(image, size); + if (retval) { + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Unable to allocate memory for " + "resource\n"); + goto err_res; + } + + if (size == 0) { + pci_base = 0; + pci_bound = 0; + vme_offset = 0; + } else { + pci_base = (unsigned long long)image->bus_resource.start; + + /* + * Bound address is a valid address for the window, adjust + * according to window granularity. + */ + pci_bound = pci_base + (size - 0x10000); + vme_offset = vme_base - pci_base; + } + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_split(pci_base, &pci_base_high, &pci_base_low); + reg_split(pci_bound, &pci_bound_high, &pci_bound_low); + reg_split(vme_offset, &vme_offset_high, &vme_offset_low); + + if (pci_base_low & 0xFFFF) { + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Invalid PCI base alignment\n"); + retval = -EINVAL; + goto err_gran; + } + if (pci_bound_low & 0xFFFF) { + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Invalid PCI bound alignment\n"); + retval = -EINVAL; + goto err_gran; + } + if (vme_offset_low & 0xFFFF) { + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Invalid VME Offset " + "alignment\n"); + retval = -EINVAL; + goto err_gran; + } + + i = image->number; + + /* Disable while we are mucking around */ + temp_ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + temp_ctl &= ~TSI148_LCSR_OTAT_EN; + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + /* Setup 2eSST speeds */ + temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M; + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_160; + break; + case VME_2eSST267: + temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_267; + break; + case VME_2eSST320: + temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + if (cycle & VME_BLT) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_BLT; + } + if (cycle & VME_MBLT) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_MBLT; + } + if (cycle & VME_2eVME) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_2eVME; + } + if (cycle & VME_2eSST) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_2eSST; + } + if (cycle & VME_2eSSTB) { + dev_warn(tsi148_bridge->parent, "Currently not setting " + "Broadcast Select Registers\n"); + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_2eSSTB; + } + + /* Setup data width */ + temp_ctl &= ~TSI148_LCSR_OTAT_DBW_M; + switch (dwidth) { + case VME_D16: + temp_ctl |= TSI148_LCSR_OTAT_DBW_16; + break; + case VME_D32: + temp_ctl |= TSI148_LCSR_OTAT_DBW_32; + break; + default: + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Invalid data width\n"); + retval = -EINVAL; + goto err_dwidth; + } + + /* Setup address space */ + temp_ctl &= ~TSI148_LCSR_OTAT_AMODE_M; + switch (aspace) { + case VME_A16: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A16; + break; + case VME_A24: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A24; + break; + case VME_A32: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A32; + break; + case VME_A64: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A64; + break; + case VME_CRCSR: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_CRCSR; + break; + case VME_USER1: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER1; + break; + case VME_USER2: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER2; + break; + case VME_USER3: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER3; + break; + case VME_USER4: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER4; + break; + default: + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Invalid address space\n"); + retval = -EINVAL; + goto err_aspace; + break; + } + + temp_ctl &= ~(3<<4); + if (cycle & VME_SUPER) + temp_ctl |= TSI148_LCSR_OTAT_SUP; + if (cycle & VME_PROG) + temp_ctl |= TSI148_LCSR_OTAT_PGM; + + /* Setup mapping */ + iowrite32be(pci_base_high, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAU); + iowrite32be(pci_base_low, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAL); + iowrite32be(pci_bound_high, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAU); + iowrite32be(pci_bound_low, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAL); + iowrite32be(vme_offset_high, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFU); + iowrite32be(vme_offset_low, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFL); + + /* Write ctl reg without enable */ + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + if (enabled) + temp_ctl |= TSI148_LCSR_OTAT_EN; + + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + spin_unlock(&image->lock); + return 0; + +err_aspace: +err_dwidth: +err_gran: + tsi148_free_resource(image); +err_res: +err_window: + return retval; + +} + +/* + * Set the attributes of an outbound window. + * + * XXX Not parsing prefetch information. + */ +static int __tsi148_master_get(struct vme_master_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, u32 *aspace, + u32 *cycle, u32 *dwidth) +{ + unsigned int i, ctl; + unsigned int pci_base_low, pci_base_high; + unsigned int pci_bound_low, pci_bound_high; + unsigned int vme_offset_low, vme_offset_high; + + unsigned long long pci_base, pci_bound, vme_offset; + struct tsi148_driver *bridge; + + bridge = image->parent->driver_priv; + + i = image->number; + + ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + pci_base_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAU); + pci_base_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAL); + pci_bound_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAU); + pci_bound_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAL); + vme_offset_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFU); + vme_offset_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFL); + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_join(pci_base_high, pci_base_low, &pci_base); + reg_join(pci_bound_high, pci_bound_low, &pci_bound); + reg_join(vme_offset_high, vme_offset_low, &vme_offset); + + *vme_base = pci_base + vme_offset; + *size = (unsigned long long)(pci_bound - pci_base) + 0x10000; + + *enabled = 0; + *aspace = 0; + *cycle = 0; + *dwidth = 0; + + if (ctl & TSI148_LCSR_OTAT_EN) + *enabled = 1; + + /* Setup address space */ + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A16) + *aspace |= VME_A16; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A24) + *aspace |= VME_A24; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A32) + *aspace |= VME_A32; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A64) + *aspace |= VME_A64; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_CRCSR) + *aspace |= VME_CRCSR; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER1) + *aspace |= VME_USER1; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER2) + *aspace |= VME_USER2; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER3) + *aspace |= VME_USER3; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER4) + *aspace |= VME_USER4; + + /* Setup 2eSST speeds */ + if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_160) + *cycle |= VME_2eSST160; + if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_267) + *cycle |= VME_2eSST267; + if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_320) + *cycle |= VME_2eSST320; + + /* Setup cycle types */ + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_SCT) + *cycle |= VME_SCT; + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_BLT) + *cycle |= VME_BLT; + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_MBLT) + *cycle |= VME_MBLT; + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eVME) + *cycle |= VME_2eVME; + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSST) + *cycle |= VME_2eSST; + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSSTB) + *cycle |= VME_2eSSTB; + + if (ctl & TSI148_LCSR_OTAT_SUP) + *cycle |= VME_SUPER; + else + *cycle |= VME_USER; + + if (ctl & TSI148_LCSR_OTAT_PGM) + *cycle |= VME_PROG; + else + *cycle |= VME_DATA; + + /* Setup data width */ + if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_16) + *dwidth = VME_D16; + if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_32) + *dwidth = VME_D32; + + return 0; +} + + +static int tsi148_master_get(struct vme_master_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, u32 *aspace, + u32 *cycle, u32 *dwidth) +{ + int retval; + + spin_lock(&image->lock); + + retval = __tsi148_master_get(image, enabled, vme_base, size, aspace, + cycle, dwidth); + + spin_unlock(&image->lock); + + return retval; +} + +static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf, + size_t count, loff_t offset) +{ + int retval, enabled; + unsigned long long vme_base, size; + u32 aspace, cycle, dwidth; + struct vme_bus_error *vme_err = NULL; + struct vme_bridge *tsi148_bridge; + + tsi148_bridge = image->parent; + + spin_lock(&image->lock); + + memcpy_fromio(buf, image->kern_base + offset, (unsigned int)count); + retval = count; + + if (!err_chk) + goto skip_chk; + + __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle, + &dwidth); + + vme_err = tsi148_find_error(tsi148_bridge, aspace, vme_base + offset, + count); + if (vme_err != NULL) { + dev_err(image->parent->parent, "First VME read error detected " + "an at address 0x%llx\n", vme_err->address); + retval = vme_err->address - (vme_base + offset); + /* Clear down save errors in this address range */ + tsi148_clear_errors(tsi148_bridge, aspace, vme_base + offset, + count); + } + +skip_chk: + spin_unlock(&image->lock); + + return retval; +} + + +static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf, + size_t count, loff_t offset) +{ + int retval = 0, enabled; + unsigned long long vme_base, size; + u32 aspace, cycle, dwidth; + + struct vme_bus_error *vme_err = NULL; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = image->parent; + + bridge = tsi148_bridge->driver_priv; + + spin_lock(&image->lock); + + memcpy_toio(image->kern_base + offset, buf, (unsigned int)count); + retval = count; + + /* + * Writes are posted. We need to do a read on the VME bus to flush out + * all of the writes before we check for errors. We can't guarantee + * that reading the data we have just written is safe. It is believed + * that there isn't any read, write re-ordering, so we can read any + * location in VME space, so lets read the Device ID from the tsi148's + * own registers as mapped into CR/CSR space. + * + * We check for saved errors in the written address range/space. + */ + + if (!err_chk) + goto skip_chk; + + /* + * Get window info first, to maximise the time that the buffers may + * fluch on their own + */ + __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle, + &dwidth); + + ioread16(bridge->flush_image->kern_base + 0x7F000); + + vme_err = tsi148_find_error(tsi148_bridge, aspace, vme_base + offset, + count); + if (vme_err != NULL) { + dev_warn(tsi148_bridge->parent, "First VME write error detected" + " an at address 0x%llx\n", vme_err->address); + retval = vme_err->address - (vme_base + offset); + /* Clear down save errors in this address range */ + tsi148_clear_errors(tsi148_bridge, aspace, vme_base + offset, + count); + } + +skip_chk: + spin_unlock(&image->lock); + + return retval; +} + +/* + * Perform an RMW cycle on the VME bus. + * + * Requires a previously configured master window, returns final value. + */ +static unsigned int tsi148_master_rmw(struct vme_master_resource *image, + unsigned int mask, unsigned int compare, unsigned int swap, + loff_t offset) +{ + unsigned long long pci_addr; + unsigned int pci_addr_high, pci_addr_low; + u32 tmp, result; + int i; + struct tsi148_driver *bridge; + + bridge = image->parent->driver_priv; + + /* Find the PCI address that maps to the desired VME address */ + i = image->number; + + /* Locking as we can only do one of these at a time */ + mutex_lock(&bridge->vme_rmw); + + /* Lock image */ + spin_lock(&image->lock); + + pci_addr_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAU); + pci_addr_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAL); + + reg_join(pci_addr_high, pci_addr_low, &pci_addr); + reg_split(pci_addr + offset, &pci_addr_high, &pci_addr_low); + + /* Configure registers */ + iowrite32be(mask, bridge->base + TSI148_LCSR_RMWEN); + iowrite32be(compare, bridge->base + TSI148_LCSR_RMWC); + iowrite32be(swap, bridge->base + TSI148_LCSR_RMWS); + iowrite32be(pci_addr_high, bridge->base + TSI148_LCSR_RMWAU); + iowrite32be(pci_addr_low, bridge->base + TSI148_LCSR_RMWAL); + + /* Enable RMW */ + tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL); + tmp |= TSI148_LCSR_VMCTRL_RMWEN; + iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL); + + /* Kick process off with a read to the required address. */ + result = ioread32be(image->kern_base + offset); + + /* Disable RMW */ + tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL); + tmp &= ~TSI148_LCSR_VMCTRL_RMWEN; + iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL); + + spin_unlock(&image->lock); + + mutex_unlock(&bridge->vme_rmw); + + return result; +} + +static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr, + u32 aspace, u32 cycle, u32 dwidth) +{ + u32 val; + + val = be32_to_cpu(*attr); + + /* Setup 2eSST speeds */ + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + val |= TSI148_LCSR_DSAT_2eSSTM_160; + break; + case VME_2eSST267: + val |= TSI148_LCSR_DSAT_2eSSTM_267; + break; + case VME_2eSST320: + val |= TSI148_LCSR_DSAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + if (cycle & VME_SCT) + val |= TSI148_LCSR_DSAT_TM_SCT; + + if (cycle & VME_BLT) + val |= TSI148_LCSR_DSAT_TM_BLT; + + if (cycle & VME_MBLT) + val |= TSI148_LCSR_DSAT_TM_MBLT; + + if (cycle & VME_2eVME) + val |= TSI148_LCSR_DSAT_TM_2eVME; + + if (cycle & VME_2eSST) + val |= TSI148_LCSR_DSAT_TM_2eSST; + + if (cycle & VME_2eSSTB) { + dev_err(dev, "Currently not setting Broadcast Select " + "Registers\n"); + val |= TSI148_LCSR_DSAT_TM_2eSSTB; + } + + /* Setup data width */ + switch (dwidth) { + case VME_D16: + val |= TSI148_LCSR_DSAT_DBW_16; + break; + case VME_D32: + val |= TSI148_LCSR_DSAT_DBW_32; + break; + default: + dev_err(dev, "Invalid data width\n"); + return -EINVAL; + } + + /* Setup address space */ + switch (aspace) { + case VME_A16: + val |= TSI148_LCSR_DSAT_AMODE_A16; + break; + case VME_A24: + val |= TSI148_LCSR_DSAT_AMODE_A24; + break; + case VME_A32: + val |= TSI148_LCSR_DSAT_AMODE_A32; + break; + case VME_A64: + val |= TSI148_LCSR_DSAT_AMODE_A64; + break; + case VME_CRCSR: + val |= TSI148_LCSR_DSAT_AMODE_CRCSR; + break; + case VME_USER1: + val |= TSI148_LCSR_DSAT_AMODE_USER1; + break; + case VME_USER2: + val |= TSI148_LCSR_DSAT_AMODE_USER2; + break; + case VME_USER3: + val |= TSI148_LCSR_DSAT_AMODE_USER3; + break; + case VME_USER4: + val |= TSI148_LCSR_DSAT_AMODE_USER4; + break; + default: + dev_err(dev, "Invalid address space\n"); + return -EINVAL; + break; + } + + if (cycle & VME_SUPER) + val |= TSI148_LCSR_DSAT_SUP; + if (cycle & VME_PROG) + val |= TSI148_LCSR_DSAT_PGM; + + *attr = cpu_to_be32(val); + + return 0; +} + +static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr, + u32 aspace, u32 cycle, u32 dwidth) +{ + u32 val; + + val = be32_to_cpu(*attr); + + /* Setup 2eSST speeds */ + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + val |= TSI148_LCSR_DDAT_2eSSTM_160; + break; + case VME_2eSST267: + val |= TSI148_LCSR_DDAT_2eSSTM_267; + break; + case VME_2eSST320: + val |= TSI148_LCSR_DDAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + if (cycle & VME_SCT) + val |= TSI148_LCSR_DDAT_TM_SCT; + + if (cycle & VME_BLT) + val |= TSI148_LCSR_DDAT_TM_BLT; + + if (cycle & VME_MBLT) + val |= TSI148_LCSR_DDAT_TM_MBLT; + + if (cycle & VME_2eVME) + val |= TSI148_LCSR_DDAT_TM_2eVME; + + if (cycle & VME_2eSST) + val |= TSI148_LCSR_DDAT_TM_2eSST; + + if (cycle & VME_2eSSTB) { + dev_err(dev, "Currently not setting Broadcast Select " + "Registers\n"); + val |= TSI148_LCSR_DDAT_TM_2eSSTB; + } + + /* Setup data width */ + switch (dwidth) { + case VME_D16: + val |= TSI148_LCSR_DDAT_DBW_16; + break; + case VME_D32: + val |= TSI148_LCSR_DDAT_DBW_32; + break; + default: + dev_err(dev, "Invalid data width\n"); + return -EINVAL; + } + + /* Setup address space */ + switch (aspace) { + case VME_A16: + val |= TSI148_LCSR_DDAT_AMODE_A16; + break; + case VME_A24: + val |= TSI148_LCSR_DDAT_AMODE_A24; + break; + case VME_A32: + val |= TSI148_LCSR_DDAT_AMODE_A32; + break; + case VME_A64: + val |= TSI148_LCSR_DDAT_AMODE_A64; + break; + case VME_CRCSR: + val |= TSI148_LCSR_DDAT_AMODE_CRCSR; + break; + case VME_USER1: + val |= TSI148_LCSR_DDAT_AMODE_USER1; + break; + case VME_USER2: + val |= TSI148_LCSR_DDAT_AMODE_USER2; + break; + case VME_USER3: + val |= TSI148_LCSR_DDAT_AMODE_USER3; + break; + case VME_USER4: + val |= TSI148_LCSR_DDAT_AMODE_USER4; + break; + default: + dev_err(dev, "Invalid address space\n"); + return -EINVAL; + break; + } + + if (cycle & VME_SUPER) + val |= TSI148_LCSR_DDAT_SUP; + if (cycle & VME_PROG) + val |= TSI148_LCSR_DDAT_PGM; + + *attr = cpu_to_be32(val); + + return 0; +} + +/* + * Add a link list descriptor to the list + * + * Note: DMA engine expects the DMA descriptor to be big endian. + */ +static int tsi148_dma_list_add(struct vme_dma_list *list, + struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count) +{ + struct tsi148_dma_entry *entry, *prev; + u32 address_high, address_low, val; + struct vme_dma_pattern *pattern_attr; + struct vme_dma_pci *pci_attr; + struct vme_dma_vme *vme_attr; + int retval = 0; + struct vme_bridge *tsi148_bridge; + + tsi148_bridge = list->parent->parent; + + /* Descriptor must be aligned on 64-bit boundaries */ + entry = kmalloc(sizeof(struct tsi148_dma_entry), GFP_KERNEL); + if (entry == NULL) { + dev_err(tsi148_bridge->parent, "Failed to allocate memory for " + "dma resource structure\n"); + retval = -ENOMEM; + goto err_mem; + } + + /* Test descriptor alignment */ + if ((unsigned long)&entry->descriptor & 0x7) { + dev_err(tsi148_bridge->parent, "Descriptor not aligned to 8 " + "byte boundary as required: %p\n", + &entry->descriptor); + retval = -EINVAL; + goto err_align; + } + + /* Given we are going to fill out the structure, we probably don't + * need to zero it, but better safe than sorry for now. + */ + memset(&entry->descriptor, 0, sizeof(struct tsi148_dma_descriptor)); + + /* Fill out source part */ + switch (src->type) { + case VME_DMA_PATTERN: + pattern_attr = src->private; + + entry->descriptor.dsal = cpu_to_be32(pattern_attr->pattern); + + val = TSI148_LCSR_DSAT_TYP_PAT; + + /* Default behaviour is 32 bit pattern */ + if (pattern_attr->type & VME_DMA_PATTERN_BYTE) + val |= TSI148_LCSR_DSAT_PSZ; + + /* It seems that the default behaviour is to increment */ + if ((pattern_attr->type & VME_DMA_PATTERN_INCREMENT) == 0) + val |= TSI148_LCSR_DSAT_NIN; + entry->descriptor.dsat = cpu_to_be32(val); + break; + case VME_DMA_PCI: + pci_attr = src->private; + + reg_split((unsigned long long)pci_attr->address, &address_high, + &address_low); + entry->descriptor.dsau = cpu_to_be32(address_high); + entry->descriptor.dsal = cpu_to_be32(address_low); + entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_PCI); + break; + case VME_DMA_VME: + vme_attr = src->private; + + reg_split((unsigned long long)vme_attr->address, &address_high, + &address_low); + entry->descriptor.dsau = cpu_to_be32(address_high); + entry->descriptor.dsal = cpu_to_be32(address_low); + entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_VME); + + retval = tsi148_dma_set_vme_src_attributes( + tsi148_bridge->parent, &entry->descriptor.dsat, + vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth); + if (retval < 0) + goto err_source; + break; + default: + dev_err(tsi148_bridge->parent, "Invalid source type\n"); + retval = -EINVAL; + goto err_source; + break; + } + + /* Assume last link - this will be over-written by adding another */ + entry->descriptor.dnlau = cpu_to_be32(0); + entry->descriptor.dnlal = cpu_to_be32(TSI148_LCSR_DNLAL_LLA); + + /* Fill out destination part */ + switch (dest->type) { + case VME_DMA_PCI: + pci_attr = dest->private; + + reg_split((unsigned long long)pci_attr->address, &address_high, + &address_low); + entry->descriptor.ddau = cpu_to_be32(address_high); + entry->descriptor.ddal = cpu_to_be32(address_low); + entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_PCI); + break; + case VME_DMA_VME: + vme_attr = dest->private; + + reg_split((unsigned long long)vme_attr->address, &address_high, + &address_low); + entry->descriptor.ddau = cpu_to_be32(address_high); + entry->descriptor.ddal = cpu_to_be32(address_low); + entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_VME); + + retval = tsi148_dma_set_vme_dest_attributes( + tsi148_bridge->parent, &entry->descriptor.ddat, + vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth); + if (retval < 0) + goto err_dest; + break; + default: + dev_err(tsi148_bridge->parent, "Invalid destination type\n"); + retval = -EINVAL; + goto err_dest; + break; + } + + /* Fill out count */ + entry->descriptor.dcnt = cpu_to_be32((u32)count); + + /* Add to list */ + list_add_tail(&entry->list, &list->entries); + + /* Fill out previous descriptors "Next Address" */ + if (entry->list.prev != &list->entries) { + prev = list_entry(entry->list.prev, struct tsi148_dma_entry, + list); + /* We need the bus address for the pointer */ + entry->dma_handle = dma_map_single(tsi148_bridge->parent, + &entry->descriptor, + sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE); + + reg_split((unsigned long long)entry->dma_handle, &address_high, + &address_low); + entry->descriptor.dnlau = cpu_to_be32(address_high); + entry->descriptor.dnlal = cpu_to_be32(address_low); + + } + + return 0; + +err_dest: +err_source: +err_align: + kfree(entry); +err_mem: + return retval; +} + +/* + * Check to see if the provided DMA channel is busy. + */ +static int tsi148_dma_busy(struct vme_bridge *tsi148_bridge, int channel) +{ + u32 tmp; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + tmp = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DSTA); + + if (tmp & TSI148_LCSR_DSTA_BSY) + return 0; + else + return 1; + +} + +/* + * Execute a previously generated link list + * + * XXX Need to provide control register configuration. + */ +static int tsi148_dma_list_exec(struct vme_dma_list *list) +{ + struct vme_dma_resource *ctrlr; + int channel, retval = 0; + struct tsi148_dma_entry *entry; + u32 bus_addr_high, bus_addr_low; + u32 val, dctlreg = 0; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + ctrlr = list->parent; + + tsi148_bridge = ctrlr->parent; + + bridge = tsi148_bridge->driver_priv; + + mutex_lock(&ctrlr->mtx); + + channel = ctrlr->number; + + if (!list_empty(&ctrlr->running)) { + /* + * XXX We have an active DMA transfer and currently haven't + * sorted out the mechanism for "pending" DMA transfers. + * Return busy. + */ + /* Need to add to pending here */ + mutex_unlock(&ctrlr->mtx); + return -EBUSY; + } else { + list_add(&list->list, &ctrlr->running); + } + + /* Get first bus address and write into registers */ + entry = list_first_entry(&list->entries, struct tsi148_dma_entry, + list); + + entry->dma_handle = dma_map_single(tsi148_bridge->parent, + &entry->descriptor, + sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE); + + mutex_unlock(&ctrlr->mtx); + + reg_split(entry->dma_handle, &bus_addr_high, &bus_addr_low); + + iowrite32be(bus_addr_high, bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAU); + iowrite32be(bus_addr_low, bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAL); + + dctlreg = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DCTL); + + /* Start the operation */ + iowrite32be(dctlreg | TSI148_LCSR_DCTL_DGO, bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL); + + wait_event_interruptible(bridge->dma_queue[channel], + tsi148_dma_busy(ctrlr->parent, channel)); + + /* + * Read status register, this register is valid until we kick off a + * new transfer. + */ + val = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DSTA); + + if (val & TSI148_LCSR_DSTA_VBE) { + dev_err(tsi148_bridge->parent, "DMA Error. DSTA=%08X\n", val); + retval = -EIO; + } + + /* Remove list from running list */ + mutex_lock(&ctrlr->mtx); + list_del(&list->list); + mutex_unlock(&ctrlr->mtx); + + return retval; +} + +/* + * Clean up a previously generated link list + * + * We have a separate function, don't assume that the chain can't be reused. + */ +static int tsi148_dma_list_empty(struct vme_dma_list *list) +{ + struct list_head *pos, *temp; + struct tsi148_dma_entry *entry; + + struct vme_bridge *tsi148_bridge = list->parent->parent; + + /* detach and free each entry */ + list_for_each_safe(pos, temp, &list->entries) { + list_del(pos); + entry = list_entry(pos, struct tsi148_dma_entry, list); + + dma_unmap_single(tsi148_bridge->parent, entry->dma_handle, + sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE); + kfree(entry); + } + + return 0; +} + +/* + * All 4 location monitors reside at the same base - this is therefore a + * system wide configuration. + * + * This does not enable the LM monitor - that should be done when the first + * callback is attached and disabled when the last callback is removed. + */ +static int tsi148_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base, + u32 aspace, u32 cycle) +{ + u32 lm_base_high, lm_base_low, lm_ctl = 0; + int i; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = lm->parent; + + bridge = tsi148_bridge->driver_priv; + + mutex_lock(&lm->mtx); + + /* If we already have a callback attached, we can't move it! */ + for (i = 0; i < lm->monitors; i++) { + if (bridge->lm_callback[i] != NULL) { + mutex_unlock(&lm->mtx); + dev_err(tsi148_bridge->parent, "Location monitor " + "callback attached, can't reset\n"); + return -EBUSY; + } + } + + switch (aspace) { + case VME_A16: + lm_ctl |= TSI148_LCSR_LMAT_AS_A16; + break; + case VME_A24: + lm_ctl |= TSI148_LCSR_LMAT_AS_A24; + break; + case VME_A32: + lm_ctl |= TSI148_LCSR_LMAT_AS_A32; + break; + case VME_A64: + lm_ctl |= TSI148_LCSR_LMAT_AS_A64; + break; + default: + mutex_unlock(&lm->mtx); + dev_err(tsi148_bridge->parent, "Invalid address space\n"); + return -EINVAL; + break; + } + + if (cycle & VME_SUPER) + lm_ctl |= TSI148_LCSR_LMAT_SUPR ; + if (cycle & VME_USER) + lm_ctl |= TSI148_LCSR_LMAT_NPRIV; + if (cycle & VME_PROG) + lm_ctl |= TSI148_LCSR_LMAT_PGM; + if (cycle & VME_DATA) + lm_ctl |= TSI148_LCSR_LMAT_DATA; + + reg_split(lm_base, &lm_base_high, &lm_base_low); + + iowrite32be(lm_base_high, bridge->base + TSI148_LCSR_LMBAU); + iowrite32be(lm_base_low, bridge->base + TSI148_LCSR_LMBAL); + iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT); + + mutex_unlock(&lm->mtx); + + return 0; +} + +/* Get configuration of the callback monitor and return whether it is enabled + * or disabled. + */ +static int tsi148_lm_get(struct vme_lm_resource *lm, + unsigned long long *lm_base, u32 *aspace, u32 *cycle) +{ + u32 lm_base_high, lm_base_low, lm_ctl, enabled = 0; + struct tsi148_driver *bridge; + + bridge = lm->parent->driver_priv; + + mutex_lock(&lm->mtx); + + lm_base_high = ioread32be(bridge->base + TSI148_LCSR_LMBAU); + lm_base_low = ioread32be(bridge->base + TSI148_LCSR_LMBAL); + lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT); + + reg_join(lm_base_high, lm_base_low, lm_base); + + if (lm_ctl & TSI148_LCSR_LMAT_EN) + enabled = 1; + + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A16) + *aspace |= VME_A16; + + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A24) + *aspace |= VME_A24; + + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A32) + *aspace |= VME_A32; + + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A64) + *aspace |= VME_A64; + + + if (lm_ctl & TSI148_LCSR_LMAT_SUPR) + *cycle |= VME_SUPER; + if (lm_ctl & TSI148_LCSR_LMAT_NPRIV) + *cycle |= VME_USER; + if (lm_ctl & TSI148_LCSR_LMAT_PGM) + *cycle |= VME_PROG; + if (lm_ctl & TSI148_LCSR_LMAT_DATA) + *cycle |= VME_DATA; + + mutex_unlock(&lm->mtx); + + return enabled; +} + +/* + * Attach a callback to a specific location monitor. + * + * Callback will be passed the monitor triggered. + */ +static int tsi148_lm_attach(struct vme_lm_resource *lm, int monitor, + void (*callback)(int)) +{ + u32 lm_ctl, tmp; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = lm->parent; + + bridge = tsi148_bridge->driver_priv; + + mutex_lock(&lm->mtx); + + /* Ensure that the location monitor is configured - need PGM or DATA */ + lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT); + if ((lm_ctl & (TSI148_LCSR_LMAT_PGM | TSI148_LCSR_LMAT_DATA)) == 0) { + mutex_unlock(&lm->mtx); + dev_err(tsi148_bridge->parent, "Location monitor not properly " + "configured\n"); + return -EINVAL; + } + + /* Check that a callback isn't already attached */ + if (bridge->lm_callback[monitor] != NULL) { + mutex_unlock(&lm->mtx); + dev_err(tsi148_bridge->parent, "Existing callback attached\n"); + return -EBUSY; + } + + /* Attach callback */ + bridge->lm_callback[monitor] = callback; + + /* Enable Location Monitor interrupt */ + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); + tmp |= TSI148_LCSR_INTEN_LMEN[monitor]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); + + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); + tmp |= TSI148_LCSR_INTEO_LMEO[monitor]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + + /* Ensure that global Location Monitor Enable set */ + if ((lm_ctl & TSI148_LCSR_LMAT_EN) == 0) { + lm_ctl |= TSI148_LCSR_LMAT_EN; + iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT); + } + + mutex_unlock(&lm->mtx); + + return 0; +} + +/* + * Detach a callback function forn a specific location monitor. + */ +static int tsi148_lm_detach(struct vme_lm_resource *lm, int monitor) +{ + u32 lm_en, tmp; + struct tsi148_driver *bridge; + + bridge = lm->parent->driver_priv; + + mutex_lock(&lm->mtx); + + /* Disable Location Monitor and ensure previous interrupts are clear */ + lm_en = ioread32be(bridge->base + TSI148_LCSR_INTEN); + lm_en &= ~TSI148_LCSR_INTEN_LMEN[monitor]; + iowrite32be(lm_en, bridge->base + TSI148_LCSR_INTEN); + + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); + tmp &= ~TSI148_LCSR_INTEO_LMEO[monitor]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + + iowrite32be(TSI148_LCSR_INTC_LMC[monitor], + bridge->base + TSI148_LCSR_INTC); + + /* Detach callback */ + bridge->lm_callback[monitor] = NULL; + + /* If all location monitors disabled, disable global Location Monitor */ + if ((lm_en & (TSI148_LCSR_INTS_LM0S | TSI148_LCSR_INTS_LM1S | + TSI148_LCSR_INTS_LM2S | TSI148_LCSR_INTS_LM3S)) == 0) { + tmp = ioread32be(bridge->base + TSI148_LCSR_LMAT); + tmp &= ~TSI148_LCSR_LMAT_EN; + iowrite32be(tmp, bridge->base + TSI148_LCSR_LMAT); + } + + mutex_unlock(&lm->mtx); + + return 0; +} + +/* + * Determine Geographical Addressing + */ +static int tsi148_slot_get(struct vme_bridge *tsi148_bridge) +{ + u32 slot = 0; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + if (!geoid) { + slot = ioread32be(bridge->base + TSI148_LCSR_VSTAT); + slot = slot & TSI148_LCSR_VSTAT_GA_M; + } else + slot = geoid; + + return (int)slot; +} + +void *tsi148_alloc_consistent(struct device *parent, size_t size, + dma_addr_t *dma) +{ + struct pci_dev *pdev; + + /* Find pci_dev container of dev */ + pdev = container_of(parent, struct pci_dev, dev); + + return pci_alloc_consistent(pdev, size, dma); +} + +void tsi148_free_consistent(struct device *parent, size_t size, void *vaddr, + dma_addr_t dma) +{ + struct pci_dev *pdev; + + /* Find pci_dev container of dev */ + pdev = container_of(parent, struct pci_dev, dev); + + pci_free_consistent(pdev, size, vaddr, dma); +} + +static int __init tsi148_init(void) +{ + return pci_register_driver(&tsi148_driver); +} + +/* + * Configure CR/CSR space + * + * Access to the CR/CSR can be configured at power-up. The location of the + * CR/CSR registers in the CR/CSR address space is determined by the boards + * Auto-ID or Geographic address. This function ensures that the window is + * enabled at an offset consistent with the boards geopgraphic address. + * + * Each board has a 512kB window, with the highest 4kB being used for the + * boards registers, this means there is a fix length 508kB window which must + * be mapped onto PCI memory. + */ +static int tsi148_crcsr_init(struct vme_bridge *tsi148_bridge, + struct pci_dev *pdev) +{ + u32 cbar, crat, vstat; + u32 crcsr_bus_high, crcsr_bus_low; + int retval; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + /* Allocate mem for CR/CSR image */ + bridge->crcsr_kernel = pci_alloc_consistent(pdev, VME_CRCSR_BUF_SIZE, + &bridge->crcsr_bus); + if (bridge->crcsr_kernel == NULL) { + dev_err(tsi148_bridge->parent, "Failed to allocate memory for " + "CR/CSR image\n"); + return -ENOMEM; + } + + memset(bridge->crcsr_kernel, 0, VME_CRCSR_BUF_SIZE); + + reg_split(bridge->crcsr_bus, &crcsr_bus_high, &crcsr_bus_low); + + iowrite32be(crcsr_bus_high, bridge->base + TSI148_LCSR_CROU); + iowrite32be(crcsr_bus_low, bridge->base + TSI148_LCSR_CROL); + + /* Ensure that the CR/CSR is configured at the correct offset */ + cbar = ioread32be(bridge->base + TSI148_CBAR); + cbar = (cbar & TSI148_CRCSR_CBAR_M)>>3; + + vstat = tsi148_slot_get(tsi148_bridge); + + if (cbar != vstat) { + cbar = vstat; + dev_info(tsi148_bridge->parent, "Setting CR/CSR offset\n"); + iowrite32be(cbar<<3, bridge->base + TSI148_CBAR); + } + dev_info(tsi148_bridge->parent, "CR/CSR Offset: %d\n", cbar); + + crat = ioread32be(bridge->base + TSI148_LCSR_CRAT); + if (crat & TSI148_LCSR_CRAT_EN) { + dev_info(tsi148_bridge->parent, "Enabling CR/CSR space\n"); + iowrite32be(crat | TSI148_LCSR_CRAT_EN, + bridge->base + TSI148_LCSR_CRAT); + } else + dev_info(tsi148_bridge->parent, "CR/CSR already enabled\n"); + + /* If we want flushed, error-checked writes, set up a window + * over the CR/CSR registers. We read from here to safely flush + * through VME writes. + */ + if (err_chk) { + retval = tsi148_master_set(bridge->flush_image, 1, + (vstat * 0x80000), 0x80000, VME_CRCSR, VME_SCT, + VME_D16); + if (retval) + dev_err(tsi148_bridge->parent, "Configuring flush image" + " failed\n"); + } + + return 0; + +} + +static void tsi148_crcsr_exit(struct vme_bridge *tsi148_bridge, + struct pci_dev *pdev) +{ + u32 crat; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + /* Turn off CR/CSR space */ + crat = ioread32be(bridge->base + TSI148_LCSR_CRAT); + iowrite32be(crat & ~TSI148_LCSR_CRAT_EN, + bridge->base + TSI148_LCSR_CRAT); + + /* Free image */ + iowrite32be(0, bridge->base + TSI148_LCSR_CROU); + iowrite32be(0, bridge->base + TSI148_LCSR_CROL); + + pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, bridge->crcsr_kernel, + bridge->crcsr_bus); +} + +static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int retval, i, master_num; + u32 data; + struct list_head *pos = NULL; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *tsi148_device; + struct vme_master_resource *master_image; + struct vme_slave_resource *slave_image; + struct vme_dma_resource *dma_ctrlr; + struct vme_lm_resource *lm; + + /* If we want to support more than one of each bridge, we need to + * dynamically generate this so we get one per device + */ + tsi148_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL); + if (tsi148_bridge == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for device " + "structure\n"); + retval = -ENOMEM; + goto err_struct; + } + + tsi148_device = kzalloc(sizeof(struct tsi148_driver), GFP_KERNEL); + if (tsi148_device == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for device " + "structure\n"); + retval = -ENOMEM; + goto err_driver; + } + + tsi148_bridge->driver_priv = tsi148_device; + + /* Enable the device */ + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "Unable to enable device\n"); + goto err_enable; + } + + /* Map Registers */ + retval = pci_request_regions(pdev, driver_name); + if (retval) { + dev_err(&pdev->dev, "Unable to reserve resources\n"); + goto err_resource; + } + + /* map registers in BAR 0 */ + tsi148_device->base = ioremap_nocache(pci_resource_start(pdev, 0), + 4096); + if (!tsi148_device->base) { + dev_err(&pdev->dev, "Unable to remap CRG region\n"); + retval = -EIO; + goto err_remap; + } + + /* Check to see if the mapping worked out */ + data = ioread32(tsi148_device->base + TSI148_PCFS_ID) & 0x0000FFFF; + if (data != PCI_VENDOR_ID_TUNDRA) { + dev_err(&pdev->dev, "CRG region check failed\n"); + retval = -EIO; + goto err_test; + } + + /* Initialize wait queues & mutual exclusion flags */ + init_waitqueue_head(&tsi148_device->dma_queue[0]); + init_waitqueue_head(&tsi148_device->dma_queue[1]); + init_waitqueue_head(&tsi148_device->iack_queue); + mutex_init(&tsi148_device->vme_int); + mutex_init(&tsi148_device->vme_rmw); + + tsi148_bridge->parent = &pdev->dev; + strcpy(tsi148_bridge->name, driver_name); + + /* Setup IRQ */ + retval = tsi148_irq_init(tsi148_bridge); + if (retval != 0) { + dev_err(&pdev->dev, "Chip Initialization failed.\n"); + goto err_irq; + } + + /* If we are going to flush writes, we need to read from the VME bus. + * We need to do this safely, thus we read the devices own CR/CSR + * register. To do this we must set up a window in CR/CSR space and + * hence have one less master window resource available. + */ + master_num = TSI148_MAX_MASTER; + if (err_chk) { + master_num--; + + tsi148_device->flush_image = + kmalloc(sizeof(struct vme_master_resource), GFP_KERNEL); + if (tsi148_device->flush_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "flush resource structure\n"); + retval = -ENOMEM; + goto err_master; + } + tsi148_device->flush_image->parent = tsi148_bridge; + spin_lock_init(&tsi148_device->flush_image->lock); + tsi148_device->flush_image->locked = 1; + tsi148_device->flush_image->number = master_num; + tsi148_device->flush_image->address_attr = VME_A16 | VME_A24 | + VME_A32 | VME_A64; + tsi148_device->flush_image->cycle_attr = VME_SCT | VME_BLT | + VME_MBLT | VME_2eVME | VME_2eSST | VME_2eSSTB | + VME_2eSST160 | VME_2eSST267 | VME_2eSST320 | VME_SUPER | + VME_USER | VME_PROG | VME_DATA; + tsi148_device->flush_image->width_attr = VME_D16 | VME_D32; + memset(&tsi148_device->flush_image->bus_resource, 0, + sizeof(struct resource)); + tsi148_device->flush_image->kern_base = NULL; + } + + /* Add master windows to list */ + INIT_LIST_HEAD(&tsi148_bridge->master_resources); + for (i = 0; i < master_num; i++) { + master_image = kmalloc(sizeof(struct vme_master_resource), + GFP_KERNEL); + if (master_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "master resource structure\n"); + retval = -ENOMEM; + goto err_master; + } + master_image->parent = tsi148_bridge; + spin_lock_init(&master_image->lock); + master_image->locked = 0; + master_image->number = i; + master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | + VME_A64; + master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | + VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | + VME_PROG | VME_DATA; + master_image->width_attr = VME_D16 | VME_D32; + memset(&master_image->bus_resource, 0, + sizeof(struct resource)); + master_image->kern_base = NULL; + list_add_tail(&master_image->list, + &tsi148_bridge->master_resources); + } + + /* Add slave windows to list */ + INIT_LIST_HEAD(&tsi148_bridge->slave_resources); + for (i = 0; i < TSI148_MAX_SLAVE; i++) { + slave_image = kmalloc(sizeof(struct vme_slave_resource), + GFP_KERNEL); + if (slave_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "slave resource structure\n"); + retval = -ENOMEM; + goto err_slave; + } + slave_image->parent = tsi148_bridge; + mutex_init(&slave_image->mtx); + slave_image->locked = 0; + slave_image->number = i; + slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 | + VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 | + VME_USER3 | VME_USER4; + slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | + VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | + VME_PROG | VME_DATA; + list_add_tail(&slave_image->list, + &tsi148_bridge->slave_resources); + } + + /* Add dma engines to list */ + INIT_LIST_HEAD(&tsi148_bridge->dma_resources); + for (i = 0; i < TSI148_MAX_DMA; i++) { + dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource), + GFP_KERNEL); + if (dma_ctrlr == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "dma resource structure\n"); + retval = -ENOMEM; + goto err_dma; + } + dma_ctrlr->parent = tsi148_bridge; + mutex_init(&dma_ctrlr->mtx); + dma_ctrlr->locked = 0; + dma_ctrlr->number = i; + dma_ctrlr->route_attr = VME_DMA_VME_TO_MEM | + VME_DMA_MEM_TO_VME | VME_DMA_VME_TO_VME | + VME_DMA_MEM_TO_MEM | VME_DMA_PATTERN_TO_VME | + VME_DMA_PATTERN_TO_MEM; + INIT_LIST_HEAD(&dma_ctrlr->pending); + INIT_LIST_HEAD(&dma_ctrlr->running); + list_add_tail(&dma_ctrlr->list, + &tsi148_bridge->dma_resources); + } + + /* Add location monitor to list */ + INIT_LIST_HEAD(&tsi148_bridge->lm_resources); + lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL); + if (lm == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "location monitor resource structure\n"); + retval = -ENOMEM; + goto err_lm; + } + lm->parent = tsi148_bridge; + mutex_init(&lm->mtx); + lm->locked = 0; + lm->number = 1; + lm->monitors = 4; + list_add_tail(&lm->list, &tsi148_bridge->lm_resources); + + tsi148_bridge->slave_get = tsi148_slave_get; + tsi148_bridge->slave_set = tsi148_slave_set; + tsi148_bridge->master_get = tsi148_master_get; + tsi148_bridge->master_set = tsi148_master_set; + tsi148_bridge->master_read = tsi148_master_read; + tsi148_bridge->master_write = tsi148_master_write; + tsi148_bridge->master_rmw = tsi148_master_rmw; + tsi148_bridge->dma_list_add = tsi148_dma_list_add; + tsi148_bridge->dma_list_exec = tsi148_dma_list_exec; + tsi148_bridge->dma_list_empty = tsi148_dma_list_empty; + tsi148_bridge->irq_set = tsi148_irq_set; + tsi148_bridge->irq_generate = tsi148_irq_generate; + tsi148_bridge->lm_set = tsi148_lm_set; + tsi148_bridge->lm_get = tsi148_lm_get; + tsi148_bridge->lm_attach = tsi148_lm_attach; + tsi148_bridge->lm_detach = tsi148_lm_detach; + tsi148_bridge->slot_get = tsi148_slot_get; + tsi148_bridge->alloc_consistent = tsi148_alloc_consistent; + tsi148_bridge->free_consistent = tsi148_free_consistent; + + data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT); + dev_info(&pdev->dev, "Board is%s the VME system controller\n", + (data & TSI148_LCSR_VSTAT_SCONS) ? "" : " not"); + if (!geoid) + dev_info(&pdev->dev, "VME geographical address is %d\n", + data & TSI148_LCSR_VSTAT_GA_M); + else + dev_info(&pdev->dev, "VME geographical address is set to %d\n", + geoid); + + dev_info(&pdev->dev, "VME Write and flush and error check is %s\n", + err_chk ? "enabled" : "disabled"); + + if (tsi148_crcsr_init(tsi148_bridge, pdev)) { + dev_err(&pdev->dev, "CR/CSR configuration failed.\n"); + goto err_crcsr; + } + + retval = vme_register_bridge(tsi148_bridge); + if (retval != 0) { + dev_err(&pdev->dev, "Chip Registration failed.\n"); + goto err_reg; + } + + pci_set_drvdata(pdev, tsi148_bridge); + + /* Clear VME bus "board fail", and "power-up reset" lines */ + data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT); + data &= ~TSI148_LCSR_VSTAT_BRDFL; + data |= TSI148_LCSR_VSTAT_CPURST; + iowrite32be(data, tsi148_device->base + TSI148_LCSR_VSTAT); + + return 0; + +err_reg: + tsi148_crcsr_exit(tsi148_bridge, pdev); +err_crcsr: +err_lm: + /* resources are stored in link list */ + list_for_each(pos, &tsi148_bridge->lm_resources) { + lm = list_entry(pos, struct vme_lm_resource, list); + list_del(pos); + kfree(lm); + } +err_dma: + /* resources are stored in link list */ + list_for_each(pos, &tsi148_bridge->dma_resources) { + dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); + list_del(pos); + kfree(dma_ctrlr); + } +err_slave: + /* resources are stored in link list */ + list_for_each(pos, &tsi148_bridge->slave_resources) { + slave_image = list_entry(pos, struct vme_slave_resource, list); + list_del(pos); + kfree(slave_image); + } +err_master: + /* resources are stored in link list */ + list_for_each(pos, &tsi148_bridge->master_resources) { + master_image = list_entry(pos, struct vme_master_resource, + list); + list_del(pos); + kfree(master_image); + } + + tsi148_irq_exit(tsi148_bridge, pdev); +err_irq: +err_test: + iounmap(tsi148_device->base); +err_remap: + pci_release_regions(pdev); +err_resource: + pci_disable_device(pdev); +err_enable: + kfree(tsi148_device); +err_driver: + kfree(tsi148_bridge); +err_struct: + return retval; + +} + +static void tsi148_remove(struct pci_dev *pdev) +{ + struct list_head *pos = NULL; + struct list_head *tmplist; + struct vme_master_resource *master_image; + struct vme_slave_resource *slave_image; + struct vme_dma_resource *dma_ctrlr; + int i; + struct tsi148_driver *bridge; + struct vme_bridge *tsi148_bridge = pci_get_drvdata(pdev); + + bridge = tsi148_bridge->driver_priv; + + + dev_dbg(&pdev->dev, "Driver is being unloaded.\n"); + + /* + * Shutdown all inbound and outbound windows. + */ + for (i = 0; i < 8; i++) { + iowrite32be(0, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + iowrite32be(0, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + } + + /* + * Shutdown Location monitor. + */ + iowrite32be(0, bridge->base + TSI148_LCSR_LMAT); + + /* + * Shutdown CRG map. + */ + iowrite32be(0, bridge->base + TSI148_LCSR_CSRAT); + + /* + * Clear error status. + */ + iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_EDPAT); + iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_VEAT); + iowrite32be(0x07000700, bridge->base + TSI148_LCSR_PSTAT); + + /* + * Remove VIRQ interrupt (if any) + */ + if (ioread32be(bridge->base + TSI148_LCSR_VICR) & 0x800) + iowrite32be(0x8000, bridge->base + TSI148_LCSR_VICR); + + /* + * Map all Interrupts to PCI INTA + */ + iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM1); + iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM2); + + tsi148_irq_exit(tsi148_bridge, pdev); + + vme_unregister_bridge(tsi148_bridge); + + tsi148_crcsr_exit(tsi148_bridge, pdev); + + /* resources are stored in link list */ + list_for_each_safe(pos, tmplist, &tsi148_bridge->dma_resources) { + dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); + list_del(pos); + kfree(dma_ctrlr); + } + + /* resources are stored in link list */ + list_for_each_safe(pos, tmplist, &tsi148_bridge->slave_resources) { + slave_image = list_entry(pos, struct vme_slave_resource, list); + list_del(pos); + kfree(slave_image); + } + + /* resources are stored in link list */ + list_for_each_safe(pos, tmplist, &tsi148_bridge->master_resources) { + master_image = list_entry(pos, struct vme_master_resource, + list); + list_del(pos); + kfree(master_image); + } + + iounmap(bridge->base); + + pci_release_regions(pdev); + + pci_disable_device(pdev); + + kfree(tsi148_bridge->driver_priv); + + kfree(tsi148_bridge); +} + +static void __exit tsi148_exit(void) +{ + pci_unregister_driver(&tsi148_driver); +} + +MODULE_PARM_DESC(err_chk, "Check for VME errors on reads and writes"); +module_param(err_chk, bool, 0); + +MODULE_PARM_DESC(geoid, "Override geographical addressing"); +module_param(geoid, int, 0); + +MODULE_DESCRIPTION("VME driver for the Tundra Tempe VME bridge"); +MODULE_LICENSE("GPL"); + +module_init(tsi148_init); +module_exit(tsi148_exit); diff --git a/drivers/vme/bridges/vme_tsi148.h b/drivers/vme/bridges/vme_tsi148.h new file mode 100644 index 0000000..f5ed1438 --- /dev/null +++ b/drivers/vme/bridges/vme_tsi148.h @@ -0,0 +1,1410 @@ +/* + * tsi148.h + * + * Support for the Tundra TSI148 VME Bridge chip + * + * Author: Tom Armistead + * Updated and maintained by Ajit Prem + * Copyright 2004 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef TSI148_H +#define TSI148_H + +#ifndef PCI_VENDOR_ID_TUNDRA +#define PCI_VENDOR_ID_TUNDRA 0x10e3 +#endif + +#ifndef PCI_DEVICE_ID_TUNDRA_TSI148 +#define PCI_DEVICE_ID_TUNDRA_TSI148 0x148 +#endif + +/* + * Define the number of each that the Tsi148 supports. + */ +#define TSI148_MAX_MASTER 8 /* Max Master Windows */ +#define TSI148_MAX_SLAVE 8 /* Max Slave Windows */ +#define TSI148_MAX_DMA 2 /* Max DMA Controllers */ +#define TSI148_MAX_MAILBOX 4 /* Max Mail Box registers */ +#define TSI148_MAX_SEMAPHORE 8 /* Max Semaphores */ + +/* Structure used to hold driver specific information */ +struct tsi148_driver { + void __iomem *base; /* Base Address of device registers */ + wait_queue_head_t dma_queue[2]; + wait_queue_head_t iack_queue; + void (*lm_callback[4])(int); /* Called in interrupt handler */ + void *crcsr_kernel; + dma_addr_t crcsr_bus; + struct vme_master_resource *flush_image; + struct mutex vme_rmw; /* Only one RMW cycle at a time */ + struct mutex vme_int; /* + * Only one VME interrupt can be + * generated at a time, provide locking + */ +}; + +/* + * Layout of a DMAC Linked-List Descriptor + * + * Note: This structure is accessed via the chip and therefore must be + * correctly laid out - It must also be aligned on 64-bit boundaries. + */ +struct tsi148_dma_descriptor { + __be32 dsau; /* Source Address */ + __be32 dsal; + __be32 ddau; /* Destination Address */ + __be32 ddal; + __be32 dsat; /* Source attributes */ + __be32 ddat; /* Destination attributes */ + __be32 dnlau; /* Next link address */ + __be32 dnlal; + __be32 dcnt; /* Byte count */ + __be32 ddbs; /* 2eSST Broadcast select */ +}; + +struct tsi148_dma_entry { + /* + * The descriptor needs to be aligned on a 64-bit boundary, we increase + * the chance of this by putting it first in the structure. + */ + struct tsi148_dma_descriptor descriptor; + struct list_head list; + dma_addr_t dma_handle; +}; + +/* + * TSI148 ASIC register structure overlays and bit field definitions. + * + * Note: Tsi148 Register Group (CRG) consists of the following + * combination of registers: + * PCFS - PCI Configuration Space Registers + * LCSR - Local Control and Status Registers + * GCSR - Global Control and Status Registers + * CR/CSR - Subset of Configuration ROM / + * Control and Status Registers + */ + + +/* + * Command/Status Registers (CRG + $004) + */ +#define TSI148_PCFS_ID 0x0 +#define TSI148_PCFS_CSR 0x4 +#define TSI148_PCFS_CLASS 0x8 +#define TSI148_PCFS_MISC0 0xC +#define TSI148_PCFS_MBARL 0x10 +#define TSI148_PCFS_MBARU 0x14 + +#define TSI148_PCFS_SUBID 0x28 + +#define TSI148_PCFS_CAPP 0x34 + +#define TSI148_PCFS_MISC1 0x3C + +#define TSI148_PCFS_XCAPP 0x40 +#define TSI148_PCFS_XSTAT 0x44 + +/* + * LCSR definitions + */ + +/* + * Outbound Translations + */ +#define TSI148_LCSR_OT0_OTSAU 0x100 +#define TSI148_LCSR_OT0_OTSAL 0x104 +#define TSI148_LCSR_OT0_OTEAU 0x108 +#define TSI148_LCSR_OT0_OTEAL 0x10C +#define TSI148_LCSR_OT0_OTOFU 0x110 +#define TSI148_LCSR_OT0_OTOFL 0x114 +#define TSI148_LCSR_OT0_OTBS 0x118 +#define TSI148_LCSR_OT0_OTAT 0x11C + +#define TSI148_LCSR_OT1_OTSAU 0x120 +#define TSI148_LCSR_OT1_OTSAL 0x124 +#define TSI148_LCSR_OT1_OTEAU 0x128 +#define TSI148_LCSR_OT1_OTEAL 0x12C +#define TSI148_LCSR_OT1_OTOFU 0x130 +#define TSI148_LCSR_OT1_OTOFL 0x134 +#define TSI148_LCSR_OT1_OTBS 0x138 +#define TSI148_LCSR_OT1_OTAT 0x13C + +#define TSI148_LCSR_OT2_OTSAU 0x140 +#define TSI148_LCSR_OT2_OTSAL 0x144 +#define TSI148_LCSR_OT2_OTEAU 0x148 +#define TSI148_LCSR_OT2_OTEAL 0x14C +#define TSI148_LCSR_OT2_OTOFU 0x150 +#define TSI148_LCSR_OT2_OTOFL 0x154 +#define TSI148_LCSR_OT2_OTBS 0x158 +#define TSI148_LCSR_OT2_OTAT 0x15C + +#define TSI148_LCSR_OT3_OTSAU 0x160 +#define TSI148_LCSR_OT3_OTSAL 0x164 +#define TSI148_LCSR_OT3_OTEAU 0x168 +#define TSI148_LCSR_OT3_OTEAL 0x16C +#define TSI148_LCSR_OT3_OTOFU 0x170 +#define TSI148_LCSR_OT3_OTOFL 0x174 +#define TSI148_LCSR_OT3_OTBS 0x178 +#define TSI148_LCSR_OT3_OTAT 0x17C + +#define TSI148_LCSR_OT4_OTSAU 0x180 +#define TSI148_LCSR_OT4_OTSAL 0x184 +#define TSI148_LCSR_OT4_OTEAU 0x188 +#define TSI148_LCSR_OT4_OTEAL 0x18C +#define TSI148_LCSR_OT4_OTOFU 0x190 +#define TSI148_LCSR_OT4_OTOFL 0x194 +#define TSI148_LCSR_OT4_OTBS 0x198 +#define TSI148_LCSR_OT4_OTAT 0x19C + +#define TSI148_LCSR_OT5_OTSAU 0x1A0 +#define TSI148_LCSR_OT5_OTSAL 0x1A4 +#define TSI148_LCSR_OT5_OTEAU 0x1A8 +#define TSI148_LCSR_OT5_OTEAL 0x1AC +#define TSI148_LCSR_OT5_OTOFU 0x1B0 +#define TSI148_LCSR_OT5_OTOFL 0x1B4 +#define TSI148_LCSR_OT5_OTBS 0x1B8 +#define TSI148_LCSR_OT5_OTAT 0x1BC + +#define TSI148_LCSR_OT6_OTSAU 0x1C0 +#define TSI148_LCSR_OT6_OTSAL 0x1C4 +#define TSI148_LCSR_OT6_OTEAU 0x1C8 +#define TSI148_LCSR_OT6_OTEAL 0x1CC +#define TSI148_LCSR_OT6_OTOFU 0x1D0 +#define TSI148_LCSR_OT6_OTOFL 0x1D4 +#define TSI148_LCSR_OT6_OTBS 0x1D8 +#define TSI148_LCSR_OT6_OTAT 0x1DC + +#define TSI148_LCSR_OT7_OTSAU 0x1E0 +#define TSI148_LCSR_OT7_OTSAL 0x1E4 +#define TSI148_LCSR_OT7_OTEAU 0x1E8 +#define TSI148_LCSR_OT7_OTEAL 0x1EC +#define TSI148_LCSR_OT7_OTOFU 0x1F0 +#define TSI148_LCSR_OT7_OTOFL 0x1F4 +#define TSI148_LCSR_OT7_OTBS 0x1F8 +#define TSI148_LCSR_OT7_OTAT 0x1FC + +#define TSI148_LCSR_OT0 0x100 +#define TSI148_LCSR_OT1 0x120 +#define TSI148_LCSR_OT2 0x140 +#define TSI148_LCSR_OT3 0x160 +#define TSI148_LCSR_OT4 0x180 +#define TSI148_LCSR_OT5 0x1A0 +#define TSI148_LCSR_OT6 0x1C0 +#define TSI148_LCSR_OT7 0x1E0 + +static const int TSI148_LCSR_OT[8] = { TSI148_LCSR_OT0, TSI148_LCSR_OT1, + TSI148_LCSR_OT2, TSI148_LCSR_OT3, + TSI148_LCSR_OT4, TSI148_LCSR_OT5, + TSI148_LCSR_OT6, TSI148_LCSR_OT7 }; + +#define TSI148_LCSR_OFFSET_OTSAU 0x0 +#define TSI148_LCSR_OFFSET_OTSAL 0x4 +#define TSI148_LCSR_OFFSET_OTEAU 0x8 +#define TSI148_LCSR_OFFSET_OTEAL 0xC +#define TSI148_LCSR_OFFSET_OTOFU 0x10 +#define TSI148_LCSR_OFFSET_OTOFL 0x14 +#define TSI148_LCSR_OFFSET_OTBS 0x18 +#define TSI148_LCSR_OFFSET_OTAT 0x1C + +/* + * VMEbus interrupt ack + * offset 200 + */ +#define TSI148_LCSR_VIACK1 0x204 +#define TSI148_LCSR_VIACK2 0x208 +#define TSI148_LCSR_VIACK3 0x20C +#define TSI148_LCSR_VIACK4 0x210 +#define TSI148_LCSR_VIACK5 0x214 +#define TSI148_LCSR_VIACK6 0x218 +#define TSI148_LCSR_VIACK7 0x21C + +static const int TSI148_LCSR_VIACK[8] = { 0, TSI148_LCSR_VIACK1, + TSI148_LCSR_VIACK2, TSI148_LCSR_VIACK3, + TSI148_LCSR_VIACK4, TSI148_LCSR_VIACK5, + TSI148_LCSR_VIACK6, TSI148_LCSR_VIACK7 }; + +/* + * RMW + * offset 220 + */ +#define TSI148_LCSR_RMWAU 0x220 +#define TSI148_LCSR_RMWAL 0x224 +#define TSI148_LCSR_RMWEN 0x228 +#define TSI148_LCSR_RMWC 0x22C +#define TSI148_LCSR_RMWS 0x230 + +/* + * VMEbus control + * offset 234 + */ +#define TSI148_LCSR_VMCTRL 0x234 +#define TSI148_LCSR_VCTRL 0x238 +#define TSI148_LCSR_VSTAT 0x23C + +/* + * PCI status + * offset 240 + */ +#define TSI148_LCSR_PSTAT 0x240 + +/* + * VME filter. + * offset 250 + */ +#define TSI148_LCSR_VMEFL 0x250 + + /* + * VME exception. + * offset 260 + */ +#define TSI148_LCSR_VEAU 0x260 +#define TSI148_LCSR_VEAL 0x264 +#define TSI148_LCSR_VEAT 0x268 + + /* + * PCI error + * offset 270 + */ +#define TSI148_LCSR_EDPAU 0x270 +#define TSI148_LCSR_EDPAL 0x274 +#define TSI148_LCSR_EDPXA 0x278 +#define TSI148_LCSR_EDPXS 0x27C +#define TSI148_LCSR_EDPAT 0x280 + + /* + * Inbound Translations + * offset 300 + */ +#define TSI148_LCSR_IT0_ITSAU 0x300 +#define TSI148_LCSR_IT0_ITSAL 0x304 +#define TSI148_LCSR_IT0_ITEAU 0x308 +#define TSI148_LCSR_IT0_ITEAL 0x30C +#define TSI148_LCSR_IT0_ITOFU 0x310 +#define TSI148_LCSR_IT0_ITOFL 0x314 +#define TSI148_LCSR_IT0_ITAT 0x318 + +#define TSI148_LCSR_IT1_ITSAU 0x320 +#define TSI148_LCSR_IT1_ITSAL 0x324 +#define TSI148_LCSR_IT1_ITEAU 0x328 +#define TSI148_LCSR_IT1_ITEAL 0x32C +#define TSI148_LCSR_IT1_ITOFU 0x330 +#define TSI148_LCSR_IT1_ITOFL 0x334 +#define TSI148_LCSR_IT1_ITAT 0x338 + +#define TSI148_LCSR_IT2_ITSAU 0x340 +#define TSI148_LCSR_IT2_ITSAL 0x344 +#define TSI148_LCSR_IT2_ITEAU 0x348 +#define TSI148_LCSR_IT2_ITEAL 0x34C +#define TSI148_LCSR_IT2_ITOFU 0x350 +#define TSI148_LCSR_IT2_ITOFL 0x354 +#define TSI148_LCSR_IT2_ITAT 0x358 + +#define TSI148_LCSR_IT3_ITSAU 0x360 +#define TSI148_LCSR_IT3_ITSAL 0x364 +#define TSI148_LCSR_IT3_ITEAU 0x368 +#define TSI148_LCSR_IT3_ITEAL 0x36C +#define TSI148_LCSR_IT3_ITOFU 0x370 +#define TSI148_LCSR_IT3_ITOFL 0x374 +#define TSI148_LCSR_IT3_ITAT 0x378 + +#define TSI148_LCSR_IT4_ITSAU 0x380 +#define TSI148_LCSR_IT4_ITSAL 0x384 +#define TSI148_LCSR_IT4_ITEAU 0x388 +#define TSI148_LCSR_IT4_ITEAL 0x38C +#define TSI148_LCSR_IT4_ITOFU 0x390 +#define TSI148_LCSR_IT4_ITOFL 0x394 +#define TSI148_LCSR_IT4_ITAT 0x398 + +#define TSI148_LCSR_IT5_ITSAU 0x3A0 +#define TSI148_LCSR_IT5_ITSAL 0x3A4 +#define TSI148_LCSR_IT5_ITEAU 0x3A8 +#define TSI148_LCSR_IT5_ITEAL 0x3AC +#define TSI148_LCSR_IT5_ITOFU 0x3B0 +#define TSI148_LCSR_IT5_ITOFL 0x3B4 +#define TSI148_LCSR_IT5_ITAT 0x3B8 + +#define TSI148_LCSR_IT6_ITSAU 0x3C0 +#define TSI148_LCSR_IT6_ITSAL 0x3C4 +#define TSI148_LCSR_IT6_ITEAU 0x3C8 +#define TSI148_LCSR_IT6_ITEAL 0x3CC +#define TSI148_LCSR_IT6_ITOFU 0x3D0 +#define TSI148_LCSR_IT6_ITOFL 0x3D4 +#define TSI148_LCSR_IT6_ITAT 0x3D8 + +#define TSI148_LCSR_IT7_ITSAU 0x3E0 +#define TSI148_LCSR_IT7_ITSAL 0x3E4 +#define TSI148_LCSR_IT7_ITEAU 0x3E8 +#define TSI148_LCSR_IT7_ITEAL 0x3EC +#define TSI148_LCSR_IT7_ITOFU 0x3F0 +#define TSI148_LCSR_IT7_ITOFL 0x3F4 +#define TSI148_LCSR_IT7_ITAT 0x3F8 + + +#define TSI148_LCSR_IT0 0x300 +#define TSI148_LCSR_IT1 0x320 +#define TSI148_LCSR_IT2 0x340 +#define TSI148_LCSR_IT3 0x360 +#define TSI148_LCSR_IT4 0x380 +#define TSI148_LCSR_IT5 0x3A0 +#define TSI148_LCSR_IT6 0x3C0 +#define TSI148_LCSR_IT7 0x3E0 + +static const int TSI148_LCSR_IT[8] = { TSI148_LCSR_IT0, TSI148_LCSR_IT1, + TSI148_LCSR_IT2, TSI148_LCSR_IT3, + TSI148_LCSR_IT4, TSI148_LCSR_IT5, + TSI148_LCSR_IT6, TSI148_LCSR_IT7 }; + +#define TSI148_LCSR_OFFSET_ITSAU 0x0 +#define TSI148_LCSR_OFFSET_ITSAL 0x4 +#define TSI148_LCSR_OFFSET_ITEAU 0x8 +#define TSI148_LCSR_OFFSET_ITEAL 0xC +#define TSI148_LCSR_OFFSET_ITOFU 0x10 +#define TSI148_LCSR_OFFSET_ITOFL 0x14 +#define TSI148_LCSR_OFFSET_ITAT 0x18 + + /* + * Inbound Translation GCSR + * offset 400 + */ +#define TSI148_LCSR_GBAU 0x400 +#define TSI148_LCSR_GBAL 0x404 +#define TSI148_LCSR_GCSRAT 0x408 + + /* + * Inbound Translation CRG + * offset 40C + */ +#define TSI148_LCSR_CBAU 0x40C +#define TSI148_LCSR_CBAL 0x410 +#define TSI148_LCSR_CSRAT 0x414 + + /* + * Inbound Translation CR/CSR + * CRG + * offset 418 + */ +#define TSI148_LCSR_CROU 0x418 +#define TSI148_LCSR_CROL 0x41C +#define TSI148_LCSR_CRAT 0x420 + + /* + * Inbound Translation Location Monitor + * offset 424 + */ +#define TSI148_LCSR_LMBAU 0x424 +#define TSI148_LCSR_LMBAL 0x428 +#define TSI148_LCSR_LMAT 0x42C + + /* + * VMEbus Interrupt Control. + * offset 430 + */ +#define TSI148_LCSR_BCU 0x430 +#define TSI148_LCSR_BCL 0x434 +#define TSI148_LCSR_BPGTR 0x438 +#define TSI148_LCSR_BPCTR 0x43C +#define TSI148_LCSR_VICR 0x440 + + /* + * Local Bus Interrupt Control. + * offset 448 + */ +#define TSI148_LCSR_INTEN 0x448 +#define TSI148_LCSR_INTEO 0x44C +#define TSI148_LCSR_INTS 0x450 +#define TSI148_LCSR_INTC 0x454 +#define TSI148_LCSR_INTM1 0x458 +#define TSI148_LCSR_INTM2 0x45C + + /* + * DMA Controllers + * offset 500 + */ +#define TSI148_LCSR_DCTL0 0x500 +#define TSI148_LCSR_DSTA0 0x504 +#define TSI148_LCSR_DCSAU0 0x508 +#define TSI148_LCSR_DCSAL0 0x50C +#define TSI148_LCSR_DCDAU0 0x510 +#define TSI148_LCSR_DCDAL0 0x514 +#define TSI148_LCSR_DCLAU0 0x518 +#define TSI148_LCSR_DCLAL0 0x51C +#define TSI148_LCSR_DSAU0 0x520 +#define TSI148_LCSR_DSAL0 0x524 +#define TSI148_LCSR_DDAU0 0x528 +#define TSI148_LCSR_DDAL0 0x52C +#define TSI148_LCSR_DSAT0 0x530 +#define TSI148_LCSR_DDAT0 0x534 +#define TSI148_LCSR_DNLAU0 0x538 +#define TSI148_LCSR_DNLAL0 0x53C +#define TSI148_LCSR_DCNT0 0x540 +#define TSI148_LCSR_DDBS0 0x544 + +#define TSI148_LCSR_DCTL1 0x580 +#define TSI148_LCSR_DSTA1 0x584 +#define TSI148_LCSR_DCSAU1 0x588 +#define TSI148_LCSR_DCSAL1 0x58C +#define TSI148_LCSR_DCDAU1 0x590 +#define TSI148_LCSR_DCDAL1 0x594 +#define TSI148_LCSR_DCLAU1 0x598 +#define TSI148_LCSR_DCLAL1 0x59C +#define TSI148_LCSR_DSAU1 0x5A0 +#define TSI148_LCSR_DSAL1 0x5A4 +#define TSI148_LCSR_DDAU1 0x5A8 +#define TSI148_LCSR_DDAL1 0x5AC +#define TSI148_LCSR_DSAT1 0x5B0 +#define TSI148_LCSR_DDAT1 0x5B4 +#define TSI148_LCSR_DNLAU1 0x5B8 +#define TSI148_LCSR_DNLAL1 0x5BC +#define TSI148_LCSR_DCNT1 0x5C0 +#define TSI148_LCSR_DDBS1 0x5C4 + +#define TSI148_LCSR_DMA0 0x500 +#define TSI148_LCSR_DMA1 0x580 + + +static const int TSI148_LCSR_DMA[TSI148_MAX_DMA] = { TSI148_LCSR_DMA0, + TSI148_LCSR_DMA1 }; + +#define TSI148_LCSR_OFFSET_DCTL 0x0 +#define TSI148_LCSR_OFFSET_DSTA 0x4 +#define TSI148_LCSR_OFFSET_DCSAU 0x8 +#define TSI148_LCSR_OFFSET_DCSAL 0xC +#define TSI148_LCSR_OFFSET_DCDAU 0x10 +#define TSI148_LCSR_OFFSET_DCDAL 0x14 +#define TSI148_LCSR_OFFSET_DCLAU 0x18 +#define TSI148_LCSR_OFFSET_DCLAL 0x1C +#define TSI148_LCSR_OFFSET_DSAU 0x20 +#define TSI148_LCSR_OFFSET_DSAL 0x24 +#define TSI148_LCSR_OFFSET_DDAU 0x28 +#define TSI148_LCSR_OFFSET_DDAL 0x2C +#define TSI148_LCSR_OFFSET_DSAT 0x30 +#define TSI148_LCSR_OFFSET_DDAT 0x34 +#define TSI148_LCSR_OFFSET_DNLAU 0x38 +#define TSI148_LCSR_OFFSET_DNLAL 0x3C +#define TSI148_LCSR_OFFSET_DCNT 0x40 +#define TSI148_LCSR_OFFSET_DDBS 0x44 + + /* + * GCSR Register Group + */ + + /* + * GCSR CRG + * offset 00 600 - DEVI/VENI + * offset 04 604 - CTRL/GA/REVID + * offset 08 608 - Semaphore3/2/1/0 + * offset 0C 60C - Seamphore7/6/5/4 + */ +#define TSI148_GCSR_ID 0x600 +#define TSI148_GCSR_CSR 0x604 +#define TSI148_GCSR_SEMA0 0x608 +#define TSI148_GCSR_SEMA1 0x60C + + /* + * Mail Box + * GCSR CRG + * offset 10 610 - Mailbox0 + */ +#define TSI148_GCSR_MBOX0 0x610 +#define TSI148_GCSR_MBOX1 0x614 +#define TSI148_GCSR_MBOX2 0x618 +#define TSI148_GCSR_MBOX3 0x61C + +static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0, + TSI148_GCSR_MBOX1, + TSI148_GCSR_MBOX2, + TSI148_GCSR_MBOX3 }; + + /* + * CR/CSR + */ + + /* + * CR/CSR CRG + * offset 7FFF4 FF4 - CSRBCR + * offset 7FFF8 FF8 - CSRBSR + * offset 7FFFC FFC - CBAR + */ +#define TSI148_CSRBCR 0xFF4 +#define TSI148_CSRBSR 0xFF8 +#define TSI148_CBAR 0xFFC + + + + + /* + * TSI148 Register Bit Definitions + */ + + /* + * PFCS Register Set + */ +#define TSI148_PCFS_CMMD_SERR (1<<8) /* SERR_L out pin ssys err */ +#define TSI148_PCFS_CMMD_PERR (1<<6) /* PERR_L out pin parity */ +#define TSI148_PCFS_CMMD_MSTR (1<<2) /* PCI bus master */ +#define TSI148_PCFS_CMMD_MEMSP (1<<1) /* PCI mem space access */ +#define TSI148_PCFS_CMMD_IOSP (1<<0) /* PCI I/O space enable */ + +#define TSI148_PCFS_STAT_RCPVE (1<<15) /* Detected Parity Error */ +#define TSI148_PCFS_STAT_SIGSE (1<<14) /* Signalled System Error */ +#define TSI148_PCFS_STAT_RCVMA (1<<13) /* Received Master Abort */ +#define TSI148_PCFS_STAT_RCVTA (1<<12) /* Received Target Abort */ +#define TSI148_PCFS_STAT_SIGTA (1<<11) /* Signalled Target Abort */ +#define TSI148_PCFS_STAT_SELTIM (3<<9) /* DELSEL Timing */ +#define TSI148_PCFS_STAT_DPAR (1<<8) /* Data Parity Err Reported */ +#define TSI148_PCFS_STAT_FAST (1<<7) /* Fast back-to-back Cap */ +#define TSI148_PCFS_STAT_P66M (1<<5) /* 66 MHz Capable */ +#define TSI148_PCFS_STAT_CAPL (1<<4) /* Capab List - address $34 */ + +/* + * Revision ID/Class Code Registers (CRG +$008) + */ +#define TSI148_PCFS_CLAS_M (0xFF<<24) /* Class ID */ +#define TSI148_PCFS_SUBCLAS_M (0xFF<<16) /* Sub-Class ID */ +#define TSI148_PCFS_PROGIF_M (0xFF<<8) /* Sub-Class ID */ +#define TSI148_PCFS_REVID_M (0xFF<<0) /* Rev ID */ + +/* + * Cache Line Size/ Master Latency Timer/ Header Type Registers (CRG + $00C) + */ +#define TSI148_PCFS_HEAD_M (0xFF<<16) /* Master Lat Timer */ +#define TSI148_PCFS_MLAT_M (0xFF<<8) /* Master Lat Timer */ +#define TSI148_PCFS_CLSZ_M (0xFF<<0) /* Cache Line Size */ + +/* + * Memory Base Address Lower Reg (CRG + $010) + */ +#define TSI148_PCFS_MBARL_BASEL_M (0xFFFFF<<12) /* Base Addr Lower Mask */ +#define TSI148_PCFS_MBARL_PRE (1<<3) /* Prefetch */ +#define TSI148_PCFS_MBARL_MTYPE_M (3<<1) /* Memory Type Mask */ +#define TSI148_PCFS_MBARL_IOMEM (1<<0) /* I/O Space Indicator */ + +/* + * Message Signaled Interrupt Capabilities Register (CRG + $040) + */ +#define TSI148_PCFS_MSICAP_64BAC (1<<7) /* 64-bit Address Capable */ +#define TSI148_PCFS_MSICAP_MME_M (7<<4) /* Multiple Msg Enable Mask */ +#define TSI148_PCFS_MSICAP_MMC_M (7<<1) /* Multiple Msg Capable Mask */ +#define TSI148_PCFS_MSICAP_MSIEN (1<<0) /* Msg signaled INT Enable */ + +/* + * Message Address Lower Register (CRG +$044) + */ +#define TSI148_PCFS_MSIAL_M (0x3FFFFFFF<<2) /* Mask */ + +/* + * Message Data Register (CRG + 4C) + */ +#define TSI148_PCFS_MSIMD_M (0xFFFF<<0) /* Mask */ + +/* + * PCI-X Capabilities Register (CRG + $050) + */ +#define TSI148_PCFS_PCIXCAP_MOST_M (7<<4) /* Max outstanding Split Tran */ +#define TSI148_PCFS_PCIXCAP_MMRBC_M (3<<2) /* Max Mem Read byte cnt */ +#define TSI148_PCFS_PCIXCAP_ERO (1<<1) /* Enable Relaxed Ordering */ +#define TSI148_PCFS_PCIXCAP_DPERE (1<<0) /* Data Parity Recover Enable */ + +/* + * PCI-X Status Register (CRG +$054) + */ +#define TSI148_PCFS_PCIXSTAT_RSCEM (1<<29) /* Received Split Comp Error */ +#define TSI148_PCFS_PCIXSTAT_DMCRS_M (7<<26) /* max Cumulative Read Size */ +#define TSI148_PCFS_PCIXSTAT_DMOST_M (7<<23) /* max outstanding Split Trans + */ +#define TSI148_PCFS_PCIXSTAT_DMMRC_M (3<<21) /* max mem read byte count */ +#define TSI148_PCFS_PCIXSTAT_DC (1<<20) /* Device Complexity */ +#define TSI148_PCFS_PCIXSTAT_USC (1<<19) /* Unexpected Split comp */ +#define TSI148_PCFS_PCIXSTAT_SCD (1<<18) /* Split completion discard */ +#define TSI148_PCFS_PCIXSTAT_133C (1<<17) /* 133MHz capable */ +#define TSI148_PCFS_PCIXSTAT_64D (1<<16) /* 64 bit device */ +#define TSI148_PCFS_PCIXSTAT_BN_M (0xFF<<8) /* Bus number */ +#define TSI148_PCFS_PCIXSTAT_DN_M (0x1F<<3) /* Device number */ +#define TSI148_PCFS_PCIXSTAT_FN_M (7<<0) /* Function Number */ + +/* + * LCSR Registers + */ + +/* + * Outbound Translation Starting Address Lower + */ +#define TSI148_LCSR_OTSAL_M (0xFFFF<<16) /* Mask */ + +/* + * Outbound Translation Ending Address Lower + */ +#define TSI148_LCSR_OTEAL_M (0xFFFF<<16) /* Mask */ + +/* + * Outbound Translation Offset Lower + */ +#define TSI148_LCSR_OTOFFL_M (0xFFFF<<16) /* Mask */ + +/* + * Outbound Translation 2eSST Broadcast Select + */ +#define TSI148_LCSR_OTBS_M (0xFFFFF<<0) /* Mask */ + +/* + * Outbound Translation Attribute + */ +#define TSI148_LCSR_OTAT_EN (1<<31) /* Window Enable */ +#define TSI148_LCSR_OTAT_MRPFD (1<<18) /* Prefetch Disable */ + +#define TSI148_LCSR_OTAT_PFS_M (3<<16) /* Prefetch Size Mask */ +#define TSI148_LCSR_OTAT_PFS_2 (0<<16) /* 2 Cache Lines P Size */ +#define TSI148_LCSR_OTAT_PFS_4 (1<<16) /* 4 Cache Lines P Size */ +#define TSI148_LCSR_OTAT_PFS_8 (2<<16) /* 8 Cache Lines P Size */ +#define TSI148_LCSR_OTAT_PFS_16 (3<<16) /* 16 Cache Lines P Size */ + +#define TSI148_LCSR_OTAT_2eSSTM_M (7<<11) /* 2eSST Xfer Rate Mask */ +#define TSI148_LCSR_OTAT_2eSSTM_160 (0<<11) /* 160MB/s 2eSST Xfer Rate */ +#define TSI148_LCSR_OTAT_2eSSTM_267 (1<<11) /* 267MB/s 2eSST Xfer Rate */ +#define TSI148_LCSR_OTAT_2eSSTM_320 (2<<11) /* 320MB/s 2eSST Xfer Rate */ + +#define TSI148_LCSR_OTAT_TM_M (7<<8) /* Xfer Protocol Mask */ +#define TSI148_LCSR_OTAT_TM_SCT (0<<8) /* SCT Xfer Protocol */ +#define TSI148_LCSR_OTAT_TM_BLT (1<<8) /* BLT Xfer Protocol */ +#define TSI148_LCSR_OTAT_TM_MBLT (2<<8) /* MBLT Xfer Protocol */ +#define TSI148_LCSR_OTAT_TM_2eVME (3<<8) /* 2eVME Xfer Protocol */ +#define TSI148_LCSR_OTAT_TM_2eSST (4<<8) /* 2eSST Xfer Protocol */ +#define TSI148_LCSR_OTAT_TM_2eSSTB (5<<8) /* 2eSST Bcast Xfer Protocol */ + +#define TSI148_LCSR_OTAT_DBW_M (3<<6) /* Max Data Width */ +#define TSI148_LCSR_OTAT_DBW_16 (0<<6) /* 16-bit Data Width */ +#define TSI148_LCSR_OTAT_DBW_32 (1<<6) /* 32-bit Data Width */ + +#define TSI148_LCSR_OTAT_SUP (1<<5) /* Supervisory Access */ +#define TSI148_LCSR_OTAT_PGM (1<<4) /* Program Access */ + +#define TSI148_LCSR_OTAT_AMODE_M (0xf<<0) /* Address Mode Mask */ +#define TSI148_LCSR_OTAT_AMODE_A16 (0<<0) /* A16 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_A24 (1<<0) /* A24 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_A32 (2<<0) /* A32 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_A64 (4<<0) /* A32 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_CRCSR (5<<0) /* CR/CSR Address Space */ +#define TSI148_LCSR_OTAT_AMODE_USER1 (8<<0) /* User1 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_USER2 (9<<0) /* User2 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_USER3 (10<<0) /* User3 Address Space */ +#define TSI148_LCSR_OTAT_AMODE_USER4 (11<<0) /* User4 Address Space */ + +/* + * VME Master Control Register CRG+$234 + */ +#define TSI148_LCSR_VMCTRL_VSA (1<<27) /* VMEbus Stop Ack */ +#define TSI148_LCSR_VMCTRL_VS (1<<26) /* VMEbus Stop */ +#define TSI148_LCSR_VMCTRL_DHB (1<<25) /* Device Has Bus */ +#define TSI148_LCSR_VMCTRL_DWB (1<<24) /* Device Wants Bus */ + +#define TSI148_LCSR_VMCTRL_RMWEN (1<<20) /* RMW Enable */ + +#define TSI148_LCSR_VMCTRL_ATO_M (7<<16) /* Master Access Time-out Mask + */ +#define TSI148_LCSR_VMCTRL_ATO_32 (0<<16) /* 32 us */ +#define TSI148_LCSR_VMCTRL_ATO_128 (1<<16) /* 128 us */ +#define TSI148_LCSR_VMCTRL_ATO_512 (2<<16) /* 512 us */ +#define TSI148_LCSR_VMCTRL_ATO_2M (3<<16) /* 2 ms */ +#define TSI148_LCSR_VMCTRL_ATO_8M (4<<16) /* 8 ms */ +#define TSI148_LCSR_VMCTRL_ATO_32M (5<<16) /* 32 ms */ +#define TSI148_LCSR_VMCTRL_ATO_128M (6<<16) /* 128 ms */ +#define TSI148_LCSR_VMCTRL_ATO_DIS (7<<16) /* Disabled */ + +#define TSI148_LCSR_VMCTRL_VTOFF_M (7<<12) /* VMEbus Master Time off */ +#define TSI148_LCSR_VMCTRL_VTOFF_0 (0<<12) /* 0us */ +#define TSI148_LCSR_VMCTRL_VTOFF_1 (1<<12) /* 1us */ +#define TSI148_LCSR_VMCTRL_VTOFF_2 (2<<12) /* 2us */ +#define TSI148_LCSR_VMCTRL_VTOFF_4 (3<<12) /* 4us */ +#define TSI148_LCSR_VMCTRL_VTOFF_8 (4<<12) /* 8us */ +#define TSI148_LCSR_VMCTRL_VTOFF_16 (5<<12) /* 16us */ +#define TSI148_LCSR_VMCTRL_VTOFF_32 (6<<12) /* 32us */ +#define TSI148_LCSR_VMCTRL_VTOFF_64 (7<<12) /* 64us */ + +#define TSI148_LCSR_VMCTRL_VTON_M (7<<8) /* VMEbus Master Time On */ +#define TSI148_LCSR_VMCTRL_VTON_4 (0<<8) /* 8us */ +#define TSI148_LCSR_VMCTRL_VTON_8 (1<<8) /* 8us */ +#define TSI148_LCSR_VMCTRL_VTON_16 (2<<8) /* 16us */ +#define TSI148_LCSR_VMCTRL_VTON_32 (3<<8) /* 32us */ +#define TSI148_LCSR_VMCTRL_VTON_64 (4<<8) /* 64us */ +#define TSI148_LCSR_VMCTRL_VTON_128 (5<<8) /* 128us */ +#define TSI148_LCSR_VMCTRL_VTON_256 (6<<8) /* 256us */ +#define TSI148_LCSR_VMCTRL_VTON_512 (7<<8) /* 512us */ + +#define TSI148_LCSR_VMCTRL_VREL_M (3<<3) /* VMEbus Master Rel Mode Mask + */ +#define TSI148_LCSR_VMCTRL_VREL_T_D (0<<3) /* Time on or Done */ +#define TSI148_LCSR_VMCTRL_VREL_T_R_D (1<<3) /* Time on and REQ or Done */ +#define TSI148_LCSR_VMCTRL_VREL_T_B_D (2<<3) /* Time on and BCLR or Done */ +#define TSI148_LCSR_VMCTRL_VREL_T_D_R (3<<3) /* Time on or Done and REQ */ + +#define TSI148_LCSR_VMCTRL_VFAIR (1<<2) /* VMEbus Master Fair Mode */ +#define TSI148_LCSR_VMCTRL_VREQL_M (3<<0) /* VMEbus Master Req Level Mask + */ + +/* + * VMEbus Control Register CRG+$238 + */ +#define TSI148_LCSR_VCTRL_LRE (1<<31) /* Late Retry Enable */ + +#define TSI148_LCSR_VCTRL_DLT_M (0xF<<24) /* Deadlock Timer */ +#define TSI148_LCSR_VCTRL_DLT_OFF (0<<24) /* Deadlock Timer Off */ +#define TSI148_LCSR_VCTRL_DLT_16 (1<<24) /* 16 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_32 (2<<24) /* 32 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_64 (3<<24) /* 64 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_128 (4<<24) /* 128 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_256 (5<<24) /* 256 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_512 (6<<24) /* 512 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_1024 (7<<24) /* 1024 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_2048 (8<<24) /* 2048 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_4096 (9<<24) /* 4096 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_8192 (0xA<<24) /* 8192 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_16384 (0xB<<24) /* 16384 VCLKS */ +#define TSI148_LCSR_VCTRL_DLT_32768 (0xC<<24) /* 32768 VCLKS */ + +#define TSI148_LCSR_VCTRL_NERBB (1<<20) /* No Early Release of Bus Busy + */ + +#define TSI148_LCSR_VCTRL_SRESET (1<<17) /* System Reset */ +#define TSI148_LCSR_VCTRL_LRESET (1<<16) /* Local Reset */ + +#define TSI148_LCSR_VCTRL_SFAILAI (1<<15) /* SYSFAIL Auto Slot ID */ +#define TSI148_LCSR_VCTRL_BID_M (0x1F<<8) /* Broadcast ID Mask */ + +#define TSI148_LCSR_VCTRL_ATOEN (1<<7) /* Arbiter Time-out Enable */ +#define TSI148_LCSR_VCTRL_ROBIN (1<<6) /* VMEbus Round Robin */ + +#define TSI148_LCSR_VCTRL_GTO_M (7<<0) /* VMEbus Global Time-out Mask + */ +#define TSI148_LCSR_VCTRL_GTO_8 (0<<0) /* 8 us */ +#define TSI148_LCSR_VCTRL_GTO_16 (1<<0) /* 16 us */ +#define TSI148_LCSR_VCTRL_GTO_32 (2<<0) /* 32 us */ +#define TSI148_LCSR_VCTRL_GTO_64 (3<<0) /* 64 us */ +#define TSI148_LCSR_VCTRL_GTO_128 (4<<0) /* 128 us */ +#define TSI148_LCSR_VCTRL_GTO_256 (5<<0) /* 256 us */ +#define TSI148_LCSR_VCTRL_GTO_512 (6<<0) /* 512 us */ +#define TSI148_LCSR_VCTRL_GTO_DIS (7<<0) /* Disabled */ + +/* + * VMEbus Status Register CRG + $23C + */ +#define TSI148_LCSR_VSTAT_CPURST (1<<15) /* Clear power up reset */ +#define TSI148_LCSR_VSTAT_BRDFL (1<<14) /* Board fail */ +#define TSI148_LCSR_VSTAT_PURSTS (1<<12) /* Power up reset status */ +#define TSI148_LCSR_VSTAT_BDFAILS (1<<11) /* Board Fail Status */ +#define TSI148_LCSR_VSTAT_SYSFAILS (1<<10) /* System Fail Status */ +#define TSI148_LCSR_VSTAT_ACFAILS (1<<9) /* AC fail status */ +#define TSI148_LCSR_VSTAT_SCONS (1<<8) /* System Cont Status */ +#define TSI148_LCSR_VSTAT_GAP (1<<5) /* Geographic Addr Parity */ +#define TSI148_LCSR_VSTAT_GA_M (0x1F<<0) /* Geographic Addr Mask */ + +/* + * PCI Configuration Status Register CRG+$240 + */ +#define TSI148_LCSR_PSTAT_REQ64S (1<<6) /* Request 64 status set */ +#define TSI148_LCSR_PSTAT_M66ENS (1<<5) /* M66ENS 66Mhz enable */ +#define TSI148_LCSR_PSTAT_FRAMES (1<<4) /* Frame Status */ +#define TSI148_LCSR_PSTAT_IRDYS (1<<3) /* IRDY status */ +#define TSI148_LCSR_PSTAT_DEVSELS (1<<2) /* DEVL status */ +#define TSI148_LCSR_PSTAT_STOPS (1<<1) /* STOP status */ +#define TSI148_LCSR_PSTAT_TRDYS (1<<0) /* TRDY status */ + +/* + * VMEbus Exception Attributes Register CRG + $268 + */ +#define TSI148_LCSR_VEAT_VES (1<<31) /* Status */ +#define TSI148_LCSR_VEAT_VEOF (1<<30) /* Overflow */ +#define TSI148_LCSR_VEAT_VESCL (1<<29) /* Status Clear */ +#define TSI148_LCSR_VEAT_2EOT (1<<21) /* 2e Odd Termination */ +#define TSI148_LCSR_VEAT_2EST (1<<20) /* 2e Slave terminated */ +#define TSI148_LCSR_VEAT_BERR (1<<19) /* Bus Error */ +#define TSI148_LCSR_VEAT_LWORD (1<<18) /* LWORD_ signal state */ +#define TSI148_LCSR_VEAT_WRITE (1<<17) /* WRITE_ signal state */ +#define TSI148_LCSR_VEAT_IACK (1<<16) /* IACK_ signal state */ +#define TSI148_LCSR_VEAT_DS1 (1<<15) /* DS1_ signal state */ +#define TSI148_LCSR_VEAT_DS0 (1<<14) /* DS0_ signal state */ +#define TSI148_LCSR_VEAT_AM_M (0x3F<<8) /* Address Mode Mask */ +#define TSI148_LCSR_VEAT_XAM_M (0xFF<<0) /* Master AMode Mask */ + + +/* + * VMEbus PCI Error Diagnostics PCI/X Attributes Register CRG + $280 + */ +#define TSI148_LCSR_EDPAT_EDPCL (1<<29) + +/* + * Inbound Translation Starting Address Lower + */ +#define TSI148_LCSR_ITSAL6432_M (0xFFFF<<16) /* Mask */ +#define TSI148_LCSR_ITSAL24_M (0x00FFF<<12) /* Mask */ +#define TSI148_LCSR_ITSAL16_M (0x0000FFF<<4) /* Mask */ + +/* + * Inbound Translation Ending Address Lower + */ +#define TSI148_LCSR_ITEAL6432_M (0xFFFF<<16) /* Mask */ +#define TSI148_LCSR_ITEAL24_M (0x00FFF<<12) /* Mask */ +#define TSI148_LCSR_ITEAL16_M (0x0000FFF<<4) /* Mask */ + +/* + * Inbound Translation Offset Lower + */ +#define TSI148_LCSR_ITOFFL6432_M (0xFFFF<<16) /* Mask */ +#define TSI148_LCSR_ITOFFL24_M (0xFFFFF<<12) /* Mask */ +#define TSI148_LCSR_ITOFFL16_M (0xFFFFFFF<<4) /* Mask */ + +/* + * Inbound Translation Attribute + */ +#define TSI148_LCSR_ITAT_EN (1<<31) /* Window Enable */ +#define TSI148_LCSR_ITAT_TH (1<<18) /* Prefetch Threshold */ + +#define TSI148_LCSR_ITAT_VFS_M (3<<16) /* Virtual FIFO Size Mask */ +#define TSI148_LCSR_ITAT_VFS_64 (0<<16) /* 64 bytes Virtual FIFO Size */ +#define TSI148_LCSR_ITAT_VFS_128 (1<<16) /* 128 bytes Virtual FIFO Sz */ +#define TSI148_LCSR_ITAT_VFS_256 (2<<16) /* 256 bytes Virtual FIFO Sz */ +#define TSI148_LCSR_ITAT_VFS_512 (3<<16) /* 512 bytes Virtual FIFO Sz */ + +#define TSI148_LCSR_ITAT_2eSSTM_M (7<<12) /* 2eSST Xfer Rate Mask */ +#define TSI148_LCSR_ITAT_2eSSTM_160 (0<<12) /* 160MB/s 2eSST Xfer Rate */ +#define TSI148_LCSR_ITAT_2eSSTM_267 (1<<12) /* 267MB/s 2eSST Xfer Rate */ +#define TSI148_LCSR_ITAT_2eSSTM_320 (2<<12) /* 320MB/s 2eSST Xfer Rate */ + +#define TSI148_LCSR_ITAT_2eSSTB (1<<11) /* 2eSST Bcast Xfer Protocol */ +#define TSI148_LCSR_ITAT_2eSST (1<<10) /* 2eSST Xfer Protocol */ +#define TSI148_LCSR_ITAT_2eVME (1<<9) /* 2eVME Xfer Protocol */ +#define TSI148_LCSR_ITAT_MBLT (1<<8) /* MBLT Xfer Protocol */ +#define TSI148_LCSR_ITAT_BLT (1<<7) /* BLT Xfer Protocol */ + +#define TSI148_LCSR_ITAT_AS_M (7<<4) /* Address Space Mask */ +#define TSI148_LCSR_ITAT_AS_A16 (0<<4) /* A16 Address Space */ +#define TSI148_LCSR_ITAT_AS_A24 (1<<4) /* A24 Address Space */ +#define TSI148_LCSR_ITAT_AS_A32 (2<<4) /* A32 Address Space */ +#define TSI148_LCSR_ITAT_AS_A64 (4<<4) /* A64 Address Space */ + +#define TSI148_LCSR_ITAT_SUPR (1<<3) /* Supervisor Access */ +#define TSI148_LCSR_ITAT_NPRIV (1<<2) /* Non-Priv (User) Access */ +#define TSI148_LCSR_ITAT_PGM (1<<1) /* Program Access */ +#define TSI148_LCSR_ITAT_DATA (1<<0) /* Data Access */ + +/* + * GCSR Base Address Lower Address CRG +$404 + */ +#define TSI148_LCSR_GBAL_M (0x7FFFFFF<<5) /* Mask */ + +/* + * GCSR Attribute Register CRG + $408 + */ +#define TSI148_LCSR_GCSRAT_EN (1<<7) /* Enable access to GCSR */ + +#define TSI148_LCSR_GCSRAT_AS_M (7<<4) /* Address Space Mask */ +#define TSI148_LCSR_GCSRAT_AS_A16 (0<<4) /* Address Space 16 */ +#define TSI148_LCSR_GCSRAT_AS_A24 (1<<4) /* Address Space 24 */ +#define TSI148_LCSR_GCSRAT_AS_A32 (2<<4) /* Address Space 32 */ +#define TSI148_LCSR_GCSRAT_AS_A64 (4<<4) /* Address Space 64 */ + +#define TSI148_LCSR_GCSRAT_SUPR (1<<3) /* Sup set -GCSR decoder */ +#define TSI148_LCSR_GCSRAT_NPRIV (1<<2) /* Non-Privliged set - CGSR */ +#define TSI148_LCSR_GCSRAT_PGM (1<<1) /* Program set - GCSR decoder */ +#define TSI148_LCSR_GCSRAT_DATA (1<<0) /* DATA set GCSR decoder */ + +/* + * CRG Base Address Lower Address CRG + $410 + */ +#define TSI148_LCSR_CBAL_M (0xFFFFF<<12) + +/* + * CRG Attribute Register CRG + $414 + */ +#define TSI148_LCSR_CRGAT_EN (1<<7) /* Enable PRG Access */ + +#define TSI148_LCSR_CRGAT_AS_M (7<<4) /* Address Space */ +#define TSI148_LCSR_CRGAT_AS_A16 (0<<4) /* Address Space 16 */ +#define TSI148_LCSR_CRGAT_AS_A24 (1<<4) /* Address Space 24 */ +#define TSI148_LCSR_CRGAT_AS_A32 (2<<4) /* Address Space 32 */ +#define TSI148_LCSR_CRGAT_AS_A64 (4<<4) /* Address Space 64 */ + +#define TSI148_LCSR_CRGAT_SUPR (1<<3) /* Supervisor Access */ +#define TSI148_LCSR_CRGAT_NPRIV (1<<2) /* Non-Privliged(User) Access */ +#define TSI148_LCSR_CRGAT_PGM (1<<1) /* Program Access */ +#define TSI148_LCSR_CRGAT_DATA (1<<0) /* Data Access */ + +/* + * CR/CSR Offset Lower Register CRG + $41C + */ +#define TSI148_LCSR_CROL_M (0x1FFF<<19) /* Mask */ + +/* + * CR/CSR Attribute register CRG + $420 + */ +#define TSI148_LCSR_CRAT_EN (1<<7) /* Enable access to CR/CSR */ + +/* + * Location Monitor base address lower register CRG + $428 + */ +#define TSI148_LCSR_LMBAL_M (0x7FFFFFF<<5) /* Mask */ + +/* + * Location Monitor Attribute Register CRG + $42C + */ +#define TSI148_LCSR_LMAT_EN (1<<7) /* Enable Location Monitor */ + +#define TSI148_LCSR_LMAT_AS_M (7<<4) /* Address Space MASK */ +#define TSI148_LCSR_LMAT_AS_A16 (0<<4) /* A16 */ +#define TSI148_LCSR_LMAT_AS_A24 (1<<4) /* A24 */ +#define TSI148_LCSR_LMAT_AS_A32 (2<<4) /* A32 */ +#define TSI148_LCSR_LMAT_AS_A64 (4<<4) /* A64 */ + +#define TSI148_LCSR_LMAT_SUPR (1<<3) /* Supervisor Access */ +#define TSI148_LCSR_LMAT_NPRIV (1<<2) /* Non-Priv (User) Access */ +#define TSI148_LCSR_LMAT_PGM (1<<1) /* Program Access */ +#define TSI148_LCSR_LMAT_DATA (1<<0) /* Data Access */ + +/* + * Broadcast Pulse Generator Timer Register CRG + $438 + */ +#define TSI148_LCSR_BPGTR_BPGT_M (0xFFFF<<0) /* Mask */ + +/* + * Broadcast Programmable Clock Timer Register CRG + $43C + */ +#define TSI148_LCSR_BPCTR_BPCT_M (0xFFFFFF<<0) /* Mask */ + +/* + * VMEbus Interrupt Control Register CRG + $43C + */ +#define TSI148_LCSR_VICR_CNTS_M (3<<22) /* Cntr Source MASK */ +#define TSI148_LCSR_VICR_CNTS_DIS (1<<22) /* Cntr Disable */ +#define TSI148_LCSR_VICR_CNTS_IRQ1 (2<<22) /* IRQ1 to Cntr */ +#define TSI148_LCSR_VICR_CNTS_IRQ2 (3<<22) /* IRQ2 to Cntr */ + +#define TSI148_LCSR_VICR_EDGIS_M (3<<20) /* Edge interrupt MASK */ +#define TSI148_LCSR_VICR_EDGIS_DIS (1<<20) /* Edge interrupt Disable */ +#define TSI148_LCSR_VICR_EDGIS_IRQ1 (2<<20) /* IRQ1 to Edge */ +#define TSI148_LCSR_VICR_EDGIS_IRQ2 (3<<20) /* IRQ2 to Edge */ + +#define TSI148_LCSR_VICR_IRQIF_M (3<<18) /* IRQ1* Function MASK */ +#define TSI148_LCSR_VICR_IRQIF_NORM (1<<18) /* Normal */ +#define TSI148_LCSR_VICR_IRQIF_PULSE (2<<18) /* Pulse Generator */ +#define TSI148_LCSR_VICR_IRQIF_PROG (3<<18) /* Programmable Clock */ +#define TSI148_LCSR_VICR_IRQIF_1U (4<<18) /* 1us Clock */ + +#define TSI148_LCSR_VICR_IRQ2F_M (3<<16) /* IRQ2* Function MASK */ +#define TSI148_LCSR_VICR_IRQ2F_NORM (1<<16) /* Normal */ +#define TSI148_LCSR_VICR_IRQ2F_PULSE (2<<16) /* Pulse Generator */ +#define TSI148_LCSR_VICR_IRQ2F_PROG (3<<16) /* Programmable Clock */ +#define TSI148_LCSR_VICR_IRQ2F_1U (4<<16) /* 1us Clock */ + +#define TSI148_LCSR_VICR_BIP (1<<15) /* Broadcast Interrupt Pulse */ + +#define TSI148_LCSR_VICR_IRQC (1<<12) /* VMEbus IRQ Clear */ +#define TSI148_LCSR_VICR_IRQS (1<<11) /* VMEbus IRQ Status */ + +#define TSI148_LCSR_VICR_IRQL_M (7<<8) /* VMEbus SW IRQ Level Mask */ +#define TSI148_LCSR_VICR_IRQL_1 (1<<8) /* VMEbus SW IRQ Level 1 */ +#define TSI148_LCSR_VICR_IRQL_2 (2<<8) /* VMEbus SW IRQ Level 2 */ +#define TSI148_LCSR_VICR_IRQL_3 (3<<8) /* VMEbus SW IRQ Level 3 */ +#define TSI148_LCSR_VICR_IRQL_4 (4<<8) /* VMEbus SW IRQ Level 4 */ +#define TSI148_LCSR_VICR_IRQL_5 (5<<8) /* VMEbus SW IRQ Level 5 */ +#define TSI148_LCSR_VICR_IRQL_6 (6<<8) /* VMEbus SW IRQ Level 6 */ +#define TSI148_LCSR_VICR_IRQL_7 (7<<8) /* VMEbus SW IRQ Level 7 */ + +static const int TSI148_LCSR_VICR_IRQL[8] = { 0, TSI148_LCSR_VICR_IRQL_1, + TSI148_LCSR_VICR_IRQL_2, TSI148_LCSR_VICR_IRQL_3, + TSI148_LCSR_VICR_IRQL_4, TSI148_LCSR_VICR_IRQL_5, + TSI148_LCSR_VICR_IRQL_6, TSI148_LCSR_VICR_IRQL_7 }; + +#define TSI148_LCSR_VICR_STID_M (0xFF<<0) /* Status/ID Mask */ + +/* + * Interrupt Enable Register CRG + $440 + */ +#define TSI148_LCSR_INTEN_DMA1EN (1<<25) /* DMAC 1 */ +#define TSI148_LCSR_INTEN_DMA0EN (1<<24) /* DMAC 0 */ +#define TSI148_LCSR_INTEN_LM3EN (1<<23) /* Location Monitor 3 */ +#define TSI148_LCSR_INTEN_LM2EN (1<<22) /* Location Monitor 2 */ +#define TSI148_LCSR_INTEN_LM1EN (1<<21) /* Location Monitor 1 */ +#define TSI148_LCSR_INTEN_LM0EN (1<<20) /* Location Monitor 0 */ +#define TSI148_LCSR_INTEN_MB3EN (1<<19) /* Mail Box 3 */ +#define TSI148_LCSR_INTEN_MB2EN (1<<18) /* Mail Box 2 */ +#define TSI148_LCSR_INTEN_MB1EN (1<<17) /* Mail Box 1 */ +#define TSI148_LCSR_INTEN_MB0EN (1<<16) /* Mail Box 0 */ +#define TSI148_LCSR_INTEN_PERREN (1<<13) /* PCI/X Error */ +#define TSI148_LCSR_INTEN_VERREN (1<<12) /* VMEbus Error */ +#define TSI148_LCSR_INTEN_VIEEN (1<<11) /* VMEbus IRQ Edge */ +#define TSI148_LCSR_INTEN_IACKEN (1<<10) /* IACK */ +#define TSI148_LCSR_INTEN_SYSFLEN (1<<9) /* System Fail */ +#define TSI148_LCSR_INTEN_ACFLEN (1<<8) /* AC Fail */ +#define TSI148_LCSR_INTEN_IRQ7EN (1<<7) /* IRQ7 */ +#define TSI148_LCSR_INTEN_IRQ6EN (1<<6) /* IRQ6 */ +#define TSI148_LCSR_INTEN_IRQ5EN (1<<5) /* IRQ5 */ +#define TSI148_LCSR_INTEN_IRQ4EN (1<<4) /* IRQ4 */ +#define TSI148_LCSR_INTEN_IRQ3EN (1<<3) /* IRQ3 */ +#define TSI148_LCSR_INTEN_IRQ2EN (1<<2) /* IRQ2 */ +#define TSI148_LCSR_INTEN_IRQ1EN (1<<1) /* IRQ1 */ + +static const int TSI148_LCSR_INTEN_LMEN[4] = { TSI148_LCSR_INTEN_LM0EN, + TSI148_LCSR_INTEN_LM1EN, + TSI148_LCSR_INTEN_LM2EN, + TSI148_LCSR_INTEN_LM3EN }; + +static const int TSI148_LCSR_INTEN_IRQEN[7] = { TSI148_LCSR_INTEN_IRQ1EN, + TSI148_LCSR_INTEN_IRQ2EN, + TSI148_LCSR_INTEN_IRQ3EN, + TSI148_LCSR_INTEN_IRQ4EN, + TSI148_LCSR_INTEN_IRQ5EN, + TSI148_LCSR_INTEN_IRQ6EN, + TSI148_LCSR_INTEN_IRQ7EN }; + +/* + * Interrupt Enable Out Register CRG + $444 + */ +#define TSI148_LCSR_INTEO_DMA1EO (1<<25) /* DMAC 1 */ +#define TSI148_LCSR_INTEO_DMA0EO (1<<24) /* DMAC 0 */ +#define TSI148_LCSR_INTEO_LM3EO (1<<23) /* Loc Monitor 3 */ +#define TSI148_LCSR_INTEO_LM2EO (1<<22) /* Loc Monitor 2 */ +#define TSI148_LCSR_INTEO_LM1EO (1<<21) /* Loc Monitor 1 */ +#define TSI148_LCSR_INTEO_LM0EO (1<<20) /* Location Monitor 0 */ +#define TSI148_LCSR_INTEO_MB3EO (1<<19) /* Mail Box 3 */ +#define TSI148_LCSR_INTEO_MB2EO (1<<18) /* Mail Box 2 */ +#define TSI148_LCSR_INTEO_MB1EO (1<<17) /* Mail Box 1 */ +#define TSI148_LCSR_INTEO_MB0EO (1<<16) /* Mail Box 0 */ +#define TSI148_LCSR_INTEO_PERREO (1<<13) /* PCI/X Error */ +#define TSI148_LCSR_INTEO_VERREO (1<<12) /* VMEbus Error */ +#define TSI148_LCSR_INTEO_VIEEO (1<<11) /* VMEbus IRQ Edge */ +#define TSI148_LCSR_INTEO_IACKEO (1<<10) /* IACK */ +#define TSI148_LCSR_INTEO_SYSFLEO (1<<9) /* System Fail */ +#define TSI148_LCSR_INTEO_ACFLEO (1<<8) /* AC Fail */ +#define TSI148_LCSR_INTEO_IRQ7EO (1<<7) /* IRQ7 */ +#define TSI148_LCSR_INTEO_IRQ6EO (1<<6) /* IRQ6 */ +#define TSI148_LCSR_INTEO_IRQ5EO (1<<5) /* IRQ5 */ +#define TSI148_LCSR_INTEO_IRQ4EO (1<<4) /* IRQ4 */ +#define TSI148_LCSR_INTEO_IRQ3EO (1<<3) /* IRQ3 */ +#define TSI148_LCSR_INTEO_IRQ2EO (1<<2) /* IRQ2 */ +#define TSI148_LCSR_INTEO_IRQ1EO (1<<1) /* IRQ1 */ + +static const int TSI148_LCSR_INTEO_LMEO[4] = { TSI148_LCSR_INTEO_LM0EO, + TSI148_LCSR_INTEO_LM1EO, + TSI148_LCSR_INTEO_LM2EO, + TSI148_LCSR_INTEO_LM3EO }; + +static const int TSI148_LCSR_INTEO_IRQEO[7] = { TSI148_LCSR_INTEO_IRQ1EO, + TSI148_LCSR_INTEO_IRQ2EO, + TSI148_LCSR_INTEO_IRQ3EO, + TSI148_LCSR_INTEO_IRQ4EO, + TSI148_LCSR_INTEO_IRQ5EO, + TSI148_LCSR_INTEO_IRQ6EO, + TSI148_LCSR_INTEO_IRQ7EO }; + +/* + * Interrupt Status Register CRG + $448 + */ +#define TSI148_LCSR_INTS_DMA1S (1<<25) /* DMA 1 */ +#define TSI148_LCSR_INTS_DMA0S (1<<24) /* DMA 0 */ +#define TSI148_LCSR_INTS_LM3S (1<<23) /* Location Monitor 3 */ +#define TSI148_LCSR_INTS_LM2S (1<<22) /* Location Monitor 2 */ +#define TSI148_LCSR_INTS_LM1S (1<<21) /* Location Monitor 1 */ +#define TSI148_LCSR_INTS_LM0S (1<<20) /* Location Monitor 0 */ +#define TSI148_LCSR_INTS_MB3S (1<<19) /* Mail Box 3 */ +#define TSI148_LCSR_INTS_MB2S (1<<18) /* Mail Box 2 */ +#define TSI148_LCSR_INTS_MB1S (1<<17) /* Mail Box 1 */ +#define TSI148_LCSR_INTS_MB0S (1<<16) /* Mail Box 0 */ +#define TSI148_LCSR_INTS_PERRS (1<<13) /* PCI/X Error */ +#define TSI148_LCSR_INTS_VERRS (1<<12) /* VMEbus Error */ +#define TSI148_LCSR_INTS_VIES (1<<11) /* VMEbus IRQ Edge */ +#define TSI148_LCSR_INTS_IACKS (1<<10) /* IACK */ +#define TSI148_LCSR_INTS_SYSFLS (1<<9) /* System Fail */ +#define TSI148_LCSR_INTS_ACFLS (1<<8) /* AC Fail */ +#define TSI148_LCSR_INTS_IRQ7S (1<<7) /* IRQ7 */ +#define TSI148_LCSR_INTS_IRQ6S (1<<6) /* IRQ6 */ +#define TSI148_LCSR_INTS_IRQ5S (1<<5) /* IRQ5 */ +#define TSI148_LCSR_INTS_IRQ4S (1<<4) /* IRQ4 */ +#define TSI148_LCSR_INTS_IRQ3S (1<<3) /* IRQ3 */ +#define TSI148_LCSR_INTS_IRQ2S (1<<2) /* IRQ2 */ +#define TSI148_LCSR_INTS_IRQ1S (1<<1) /* IRQ1 */ + +static const int TSI148_LCSR_INTS_LMS[4] = { TSI148_LCSR_INTS_LM0S, + TSI148_LCSR_INTS_LM1S, + TSI148_LCSR_INTS_LM2S, + TSI148_LCSR_INTS_LM3S }; + +static const int TSI148_LCSR_INTS_MBS[4] = { TSI148_LCSR_INTS_MB0S, + TSI148_LCSR_INTS_MB1S, + TSI148_LCSR_INTS_MB2S, + TSI148_LCSR_INTS_MB3S }; + +/* + * Interrupt Clear Register CRG + $44C + */ +#define TSI148_LCSR_INTC_DMA1C (1<<25) /* DMA 1 */ +#define TSI148_LCSR_INTC_DMA0C (1<<24) /* DMA 0 */ +#define TSI148_LCSR_INTC_LM3C (1<<23) /* Location Monitor 3 */ +#define TSI148_LCSR_INTC_LM2C (1<<22) /* Location Monitor 2 */ +#define TSI148_LCSR_INTC_LM1C (1<<21) /* Location Monitor 1 */ +#define TSI148_LCSR_INTC_LM0C (1<<20) /* Location Monitor 0 */ +#define TSI148_LCSR_INTC_MB3C (1<<19) /* Mail Box 3 */ +#define TSI148_LCSR_INTC_MB2C (1<<18) /* Mail Box 2 */ +#define TSI148_LCSR_INTC_MB1C (1<<17) /* Mail Box 1 */ +#define TSI148_LCSR_INTC_MB0C (1<<16) /* Mail Box 0 */ +#define TSI148_LCSR_INTC_PERRC (1<<13) /* VMEbus Error */ +#define TSI148_LCSR_INTC_VERRC (1<<12) /* VMEbus Access Time-out */ +#define TSI148_LCSR_INTC_VIEC (1<<11) /* VMEbus IRQ Edge */ +#define TSI148_LCSR_INTC_IACKC (1<<10) /* IACK */ +#define TSI148_LCSR_INTC_SYSFLC (1<<9) /* System Fail */ +#define TSI148_LCSR_INTC_ACFLC (1<<8) /* AC Fail */ + +static const int TSI148_LCSR_INTC_LMC[4] = { TSI148_LCSR_INTC_LM0C, + TSI148_LCSR_INTC_LM1C, + TSI148_LCSR_INTC_LM2C, + TSI148_LCSR_INTC_LM3C }; + +static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C, + TSI148_LCSR_INTC_MB1C, + TSI148_LCSR_INTC_MB2C, + TSI148_LCSR_INTC_MB3C }; + +/* + * Interrupt Map Register 1 CRG + $458 + */ +#define TSI148_LCSR_INTM1_DMA1M_M (3<<18) /* DMA 1 */ +#define TSI148_LCSR_INTM1_DMA0M_M (3<<16) /* DMA 0 */ +#define TSI148_LCSR_INTM1_LM3M_M (3<<14) /* Location Monitor 3 */ +#define TSI148_LCSR_INTM1_LM2M_M (3<<12) /* Location Monitor 2 */ +#define TSI148_LCSR_INTM1_LM1M_M (3<<10) /* Location Monitor 1 */ +#define TSI148_LCSR_INTM1_LM0M_M (3<<8) /* Location Monitor 0 */ +#define TSI148_LCSR_INTM1_MB3M_M (3<<6) /* Mail Box 3 */ +#define TSI148_LCSR_INTM1_MB2M_M (3<<4) /* Mail Box 2 */ +#define TSI148_LCSR_INTM1_MB1M_M (3<<2) /* Mail Box 1 */ +#define TSI148_LCSR_INTM1_MB0M_M (3<<0) /* Mail Box 0 */ + +/* + * Interrupt Map Register 2 CRG + $45C + */ +#define TSI148_LCSR_INTM2_PERRM_M (3<<26) /* PCI Bus Error */ +#define TSI148_LCSR_INTM2_VERRM_M (3<<24) /* VMEbus Error */ +#define TSI148_LCSR_INTM2_VIEM_M (3<<22) /* VMEbus IRQ Edge */ +#define TSI148_LCSR_INTM2_IACKM_M (3<<20) /* IACK */ +#define TSI148_LCSR_INTM2_SYSFLM_M (3<<18) /* System Fail */ +#define TSI148_LCSR_INTM2_ACFLM_M (3<<16) /* AC Fail */ +#define TSI148_LCSR_INTM2_IRQ7M_M (3<<14) /* IRQ7 */ +#define TSI148_LCSR_INTM2_IRQ6M_M (3<<12) /* IRQ6 */ +#define TSI148_LCSR_INTM2_IRQ5M_M (3<<10) /* IRQ5 */ +#define TSI148_LCSR_INTM2_IRQ4M_M (3<<8) /* IRQ4 */ +#define TSI148_LCSR_INTM2_IRQ3M_M (3<<6) /* IRQ3 */ +#define TSI148_LCSR_INTM2_IRQ2M_M (3<<4) /* IRQ2 */ +#define TSI148_LCSR_INTM2_IRQ1M_M (3<<2) /* IRQ1 */ + +/* + * DMA Control (0-1) Registers CRG + $500 + */ +#define TSI148_LCSR_DCTL_ABT (1<<27) /* Abort */ +#define TSI148_LCSR_DCTL_PAU (1<<26) /* Pause */ +#define TSI148_LCSR_DCTL_DGO (1<<25) /* DMA Go */ + +#define TSI148_LCSR_DCTL_MOD (1<<23) /* Mode */ + +#define TSI148_LCSR_DCTL_VBKS_M (7<<12) /* VMEbus block Size MASK */ +#define TSI148_LCSR_DCTL_VBKS_32 (0<<12) /* VMEbus block Size 32 */ +#define TSI148_LCSR_DCTL_VBKS_64 (1<<12) /* VMEbus block Size 64 */ +#define TSI148_LCSR_DCTL_VBKS_128 (2<<12) /* VMEbus block Size 128 */ +#define TSI148_LCSR_DCTL_VBKS_256 (3<<12) /* VMEbus block Size 256 */ +#define TSI148_LCSR_DCTL_VBKS_512 (4<<12) /* VMEbus block Size 512 */ +#define TSI148_LCSR_DCTL_VBKS_1024 (5<<12) /* VMEbus block Size 1024 */ +#define TSI148_LCSR_DCTL_VBKS_2048 (6<<12) /* VMEbus block Size 2048 */ +#define TSI148_LCSR_DCTL_VBKS_4096 (7<<12) /* VMEbus block Size 4096 */ + +#define TSI148_LCSR_DCTL_VBOT_M (7<<8) /* VMEbus back-off MASK */ +#define TSI148_LCSR_DCTL_VBOT_0 (0<<8) /* VMEbus back-off 0us */ +#define TSI148_LCSR_DCTL_VBOT_1 (1<<8) /* VMEbus back-off 1us */ +#define TSI148_LCSR_DCTL_VBOT_2 (2<<8) /* VMEbus back-off 2us */ +#define TSI148_LCSR_DCTL_VBOT_4 (3<<8) /* VMEbus back-off 4us */ +#define TSI148_LCSR_DCTL_VBOT_8 (4<<8) /* VMEbus back-off 8us */ +#define TSI148_LCSR_DCTL_VBOT_16 (5<<8) /* VMEbus back-off 16us */ +#define TSI148_LCSR_DCTL_VBOT_32 (6<<8) /* VMEbus back-off 32us */ +#define TSI148_LCSR_DCTL_VBOT_64 (7<<8) /* VMEbus back-off 64us */ + +#define TSI148_LCSR_DCTL_PBKS_M (7<<4) /* PCI block size MASK */ +#define TSI148_LCSR_DCTL_PBKS_32 (0<<4) /* PCI block size 32 bytes */ +#define TSI148_LCSR_DCTL_PBKS_64 (1<<4) /* PCI block size 64 bytes */ +#define TSI148_LCSR_DCTL_PBKS_128 (2<<4) /* PCI block size 128 bytes */ +#define TSI148_LCSR_DCTL_PBKS_256 (3<<4) /* PCI block size 256 bytes */ +#define TSI148_LCSR_DCTL_PBKS_512 (4<<4) /* PCI block size 512 bytes */ +#define TSI148_LCSR_DCTL_PBKS_1024 (5<<4) /* PCI block size 1024 bytes */ +#define TSI148_LCSR_DCTL_PBKS_2048 (6<<4) /* PCI block size 2048 bytes */ +#define TSI148_LCSR_DCTL_PBKS_4096 (7<<4) /* PCI block size 4096 bytes */ + +#define TSI148_LCSR_DCTL_PBOT_M (7<<0) /* PCI back off MASK */ +#define TSI148_LCSR_DCTL_PBOT_0 (0<<0) /* PCI back off 0us */ +#define TSI148_LCSR_DCTL_PBOT_1 (1<<0) /* PCI back off 1us */ +#define TSI148_LCSR_DCTL_PBOT_2 (2<<0) /* PCI back off 2us */ +#define TSI148_LCSR_DCTL_PBOT_4 (3<<0) /* PCI back off 3us */ +#define TSI148_LCSR_DCTL_PBOT_8 (4<<0) /* PCI back off 4us */ +#define TSI148_LCSR_DCTL_PBOT_16 (5<<0) /* PCI back off 8us */ +#define TSI148_LCSR_DCTL_PBOT_32 (6<<0) /* PCI back off 16us */ +#define TSI148_LCSR_DCTL_PBOT_64 (7<<0) /* PCI back off 32us */ + +/* + * DMA Status Registers (0-1) CRG + $504 + */ +#define TSI148_LCSR_DSTA_SMA (1<<31) /* PCI Signalled Master Abt */ +#define TSI148_LCSR_DSTA_RTA (1<<30) /* PCI Received Target Abt */ +#define TSI148_LCSR_DSTA_MRC (1<<29) /* PCI Max Retry Count */ +#define TSI148_LCSR_DSTA_VBE (1<<28) /* VMEbus error */ +#define TSI148_LCSR_DSTA_ABT (1<<27) /* Abort */ +#define TSI148_LCSR_DSTA_PAU (1<<26) /* Pause */ +#define TSI148_LCSR_DSTA_DON (1<<25) /* Done */ +#define TSI148_LCSR_DSTA_BSY (1<<24) /* Busy */ + +/* + * DMA Current Link Address Lower (0-1) + */ +#define TSI148_LCSR_DCLAL_M (0x3FFFFFF<<6) /* Mask */ + +/* + * DMA Source Attribute (0-1) Reg + */ +#define TSI148_LCSR_DSAT_TYP_M (3<<28) /* Source Bus Type */ +#define TSI148_LCSR_DSAT_TYP_PCI (0<<28) /* PCI Bus */ +#define TSI148_LCSR_DSAT_TYP_VME (1<<28) /* VMEbus */ +#define TSI148_LCSR_DSAT_TYP_PAT (2<<28) /* Data Pattern */ + +#define TSI148_LCSR_DSAT_PSZ (1<<25) /* Pattern Size */ +#define TSI148_LCSR_DSAT_NIN (1<<24) /* No Increment */ + +#define TSI148_LCSR_DSAT_2eSSTM_M (3<<11) /* 2eSST Trans Rate Mask */ +#define TSI148_LCSR_DSAT_2eSSTM_160 (0<<11) /* 160 MB/s */ +#define TSI148_LCSR_DSAT_2eSSTM_267 (1<<11) /* 267 MB/s */ +#define TSI148_LCSR_DSAT_2eSSTM_320 (2<<11) /* 320 MB/s */ + +#define TSI148_LCSR_DSAT_TM_M (7<<8) /* Bus Transfer Protocol Mask */ +#define TSI148_LCSR_DSAT_TM_SCT (0<<8) /* SCT */ +#define TSI148_LCSR_DSAT_TM_BLT (1<<8) /* BLT */ +#define TSI148_LCSR_DSAT_TM_MBLT (2<<8) /* MBLT */ +#define TSI148_LCSR_DSAT_TM_2eVME (3<<8) /* 2eVME */ +#define TSI148_LCSR_DSAT_TM_2eSST (4<<8) /* 2eSST */ +#define TSI148_LCSR_DSAT_TM_2eSSTB (5<<8) /* 2eSST Broadcast */ + +#define TSI148_LCSR_DSAT_DBW_M (3<<6) /* Max Data Width MASK */ +#define TSI148_LCSR_DSAT_DBW_16 (0<<6) /* 16 Bits */ +#define TSI148_LCSR_DSAT_DBW_32 (1<<6) /* 32 Bits */ + +#define TSI148_LCSR_DSAT_SUP (1<<5) /* Supervisory Mode */ +#define TSI148_LCSR_DSAT_PGM (1<<4) /* Program Mode */ + +#define TSI148_LCSR_DSAT_AMODE_M (0xf<<0) /* Address Space Mask */ +#define TSI148_LCSR_DSAT_AMODE_A16 (0<<0) /* A16 */ +#define TSI148_LCSR_DSAT_AMODE_A24 (1<<0) /* A24 */ +#define TSI148_LCSR_DSAT_AMODE_A32 (2<<0) /* A32 */ +#define TSI148_LCSR_DSAT_AMODE_A64 (4<<0) /* A64 */ +#define TSI148_LCSR_DSAT_AMODE_CRCSR (5<<0) /* CR/CSR */ +#define TSI148_LCSR_DSAT_AMODE_USER1 (8<<0) /* User1 */ +#define TSI148_LCSR_DSAT_AMODE_USER2 (9<<0) /* User2 */ +#define TSI148_LCSR_DSAT_AMODE_USER3 (0xa<<0) /* User3 */ +#define TSI148_LCSR_DSAT_AMODE_USER4 (0xb<<0) /* User4 */ + +/* + * DMA Destination Attribute Registers (0-1) + */ +#define TSI148_LCSR_DDAT_TYP_PCI (0<<28) /* Destination PCI Bus */ +#define TSI148_LCSR_DDAT_TYP_VME (1<<28) /* Destination VMEbus */ + +#define TSI148_LCSR_DDAT_2eSSTM_M (3<<11) /* 2eSST Transfer Rate Mask */ +#define TSI148_LCSR_DDAT_2eSSTM_160 (0<<11) /* 160 MB/s */ +#define TSI148_LCSR_DDAT_2eSSTM_267 (1<<11) /* 267 MB/s */ +#define TSI148_LCSR_DDAT_2eSSTM_320 (2<<11) /* 320 MB/s */ + +#define TSI148_LCSR_DDAT_TM_M (7<<8) /* Bus Transfer Protocol Mask */ +#define TSI148_LCSR_DDAT_TM_SCT (0<<8) /* SCT */ +#define TSI148_LCSR_DDAT_TM_BLT (1<<8) /* BLT */ +#define TSI148_LCSR_DDAT_TM_MBLT (2<<8) /* MBLT */ +#define TSI148_LCSR_DDAT_TM_2eVME (3<<8) /* 2eVME */ +#define TSI148_LCSR_DDAT_TM_2eSST (4<<8) /* 2eSST */ +#define TSI148_LCSR_DDAT_TM_2eSSTB (5<<8) /* 2eSST Broadcast */ + +#define TSI148_LCSR_DDAT_DBW_M (3<<6) /* Max Data Width MASK */ +#define TSI148_LCSR_DDAT_DBW_16 (0<<6) /* 16 Bits */ +#define TSI148_LCSR_DDAT_DBW_32 (1<<6) /* 32 Bits */ + +#define TSI148_LCSR_DDAT_SUP (1<<5) /* Supervisory/User Access */ +#define TSI148_LCSR_DDAT_PGM (1<<4) /* Program/Data Access */ + +#define TSI148_LCSR_DDAT_AMODE_M (0xf<<0) /* Address Space Mask */ +#define TSI148_LCSR_DDAT_AMODE_A16 (0<<0) /* A16 */ +#define TSI148_LCSR_DDAT_AMODE_A24 (1<<0) /* A24 */ +#define TSI148_LCSR_DDAT_AMODE_A32 (2<<0) /* A32 */ +#define TSI148_LCSR_DDAT_AMODE_A64 (4<<0) /* A64 */ +#define TSI148_LCSR_DDAT_AMODE_CRCSR (5<<0) /* CRC/SR */ +#define TSI148_LCSR_DDAT_AMODE_USER1 (8<<0) /* User1 */ +#define TSI148_LCSR_DDAT_AMODE_USER2 (9<<0) /* User2 */ +#define TSI148_LCSR_DDAT_AMODE_USER3 (0xa<<0) /* User3 */ +#define TSI148_LCSR_DDAT_AMODE_USER4 (0xb<<0) /* User4 */ + +/* + * DMA Next Link Address Lower + */ +#define TSI148_LCSR_DNLAL_DNLAL_M (0x3FFFFFF<<6) /* Address Mask */ +#define TSI148_LCSR_DNLAL_LLA (1<<0) /* Last Link Address Indicator */ + +/* + * DMA 2eSST Broadcast Select + */ +#define TSI148_LCSR_DBS_M (0x1FFFFF<<0) /* Mask */ + +/* + * GCSR Register Group + */ + +/* + * GCSR Control and Status Register CRG + $604 + */ +#define TSI148_GCSR_GCTRL_LRST (1<<15) /* Local Reset */ +#define TSI148_GCSR_GCTRL_SFAILEN (1<<14) /* System Fail enable */ +#define TSI148_GCSR_GCTRL_BDFAILS (1<<13) /* Board Fail Status */ +#define TSI148_GCSR_GCTRL_SCON (1<<12) /* System Copntroller */ +#define TSI148_GCSR_GCTRL_MEN (1<<11) /* Module Enable (READY) */ + +#define TSI148_GCSR_GCTRL_LMI3S (1<<7) /* Loc Monitor 3 Int Status */ +#define TSI148_GCSR_GCTRL_LMI2S (1<<6) /* Loc Monitor 2 Int Status */ +#define TSI148_GCSR_GCTRL_LMI1S (1<<5) /* Loc Monitor 1 Int Status */ +#define TSI148_GCSR_GCTRL_LMI0S (1<<4) /* Loc Monitor 0 Int Status */ +#define TSI148_GCSR_GCTRL_MBI3S (1<<3) /* Mail box 3 Int Status */ +#define TSI148_GCSR_GCTRL_MBI2S (1<<2) /* Mail box 2 Int Status */ +#define TSI148_GCSR_GCTRL_MBI1S (1<<1) /* Mail box 1 Int Status */ +#define TSI148_GCSR_GCTRL_MBI0S (1<<0) /* Mail box 0 Int Status */ + +#define TSI148_GCSR_GAP (1<<5) /* Geographic Addr Parity */ +#define TSI148_GCSR_GA_M (0x1F<<0) /* Geographic Address Mask */ + +/* + * CR/CSR Register Group + */ + +/* + * CR/CSR Bit Clear Register CRG + $FF4 + */ +#define TSI148_CRCSR_CSRBCR_LRSTC (1<<7) /* Local Reset Clear */ +#define TSI148_CRCSR_CSRBCR_SFAILC (1<<6) /* System Fail Enable Clear */ +#define TSI148_CRCSR_CSRBCR_BDFAILS (1<<5) /* Board Fail Status */ +#define TSI148_CRCSR_CSRBCR_MENC (1<<4) /* Module Enable Clear */ +#define TSI148_CRCSR_CSRBCR_BERRSC (1<<3) /* Bus Error Status Clear */ + +/* + * CR/CSR Bit Set Register CRG+$FF8 + */ +#define TSI148_CRCSR_CSRBSR_LISTS (1<<7) /* Local Reset Clear */ +#define TSI148_CRCSR_CSRBSR_SFAILS (1<<6) /* System Fail Enable Clear */ +#define TSI148_CRCSR_CSRBSR_BDFAILS (1<<5) /* Board Fail Status */ +#define TSI148_CRCSR_CSRBSR_MENS (1<<4) /* Module Enable Clear */ +#define TSI148_CRCSR_CSRBSR_BERRS (1<<3) /* Bus Error Status Clear */ + +/* + * CR/CSR Base Address Register CRG + FFC + */ +#define TSI148_CRCSR_CBAR_M (0x1F<<3) /* Mask */ + +#endif /* TSI148_H */ |
