diff options
Diffstat (limited to 'drivers/video')
| -rw-r--r-- | drivers/video/omap2/dss/dsi.c | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index e2aaf5a..f2d835f 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -3665,6 +3665,186 @@ static void dsi_config_blanking_modes(struct omap_dss_device *dssdev) dsi_write_reg(dsidev, DSI_CTRL, r); } +/* + * According to section 'HS Command Mode Interleaving' in OMAP TRM, Scenario 3 + * results in maximum transition time for data and clock lanes to enter and + * exit HS mode. Hence, this is the scenario where the least amount of command + * mode data can be interleaved. We program the minimum amount of TXBYTECLKHS + * clock cycles that can be used to interleave command mode data in HS so that + * all scenarios are satisfied. + */ +static int dsi_compute_interleave_hs(int blank, bool ddr_alwon, int enter_hs, + int exit_hs, int exiths_clk, int ddr_pre, int ddr_post) +{ + int transition; + + /* + * If DDR_CLK_ALWAYS_ON is set, we need to consider HS mode transition + * time of data lanes only, if it isn't set, we need to consider HS + * transition time of both data and clock lanes. HS transition time + * of Scenario 3 is considered. + */ + if (ddr_alwon) { + transition = enter_hs + exit_hs + max(enter_hs, 2) + 1; + } else { + int trans1, trans2; + trans1 = ddr_pre + enter_hs + exit_hs + max(enter_hs, 2) + 1; + trans2 = ddr_pre + enter_hs + exiths_clk + ddr_post + ddr_pre + + enter_hs + 1; + transition = max(trans1, trans2); + } + + return blank > transition ? blank - transition : 0; +} + +/* + * According to section 'LP Command Mode Interleaving' in OMAP TRM, Scenario 1 + * results in maximum transition time for data lanes to enter and exit LP mode. + * Hence, this is the scenario where the least amount of command mode data can + * be interleaved. We program the minimum amount of bytes that can be + * interleaved in LP so that all scenarios are satisfied. + */ +static int dsi_compute_interleave_lp(int blank, int enter_hs, int exit_hs, + int lp_clk_div, int tdsi_fclk) +{ + int trans_lp; /* time required for a LP transition, in TXBYTECLKHS */ + int tlp_avail; /* time left for interleaving commands, in CLKIN4DDR */ + int ttxclkesc; /* period of LP transmit escape clock, in CLKIN4DDR */ + int thsbyte_clk = 16; /* Period of TXBYTECLKHS clock, in CLKIN4DDR */ + int lp_inter; /* cmd mode data that can be interleaved, in bytes */ + + /* maximum LP transition time according to Scenario 1 */ + trans_lp = exit_hs + max(enter_hs, 2) + 1; + + /* CLKIN4DDR = 16 * TXBYTECLKHS */ + tlp_avail = thsbyte_clk * (blank - trans_lp); + + ttxclkesc = tdsi_fclk / lp_clk_div; + + lp_inter = ((tlp_avail - 8 * thsbyte_clk - 5 * tdsi_fclk) / ttxclkesc - + 26) / 16; + + return max(lp_inter, 0); +} + +static void dsi_config_cmd_mode_interleaving(struct omap_dss_device *dssdev) +{ + struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); + int blanking_mode; + int hfp_blanking_mode, hbp_blanking_mode, hsa_blanking_mode; + int hsa, hfp, hbp, width_bytes, bllp, lp_clk_div; + int ddr_clk_pre, ddr_clk_post, enter_hs_mode_lat, exit_hs_mode_lat; + int tclk_trail, ths_exit, exiths_clk; + bool ddr_alwon; + struct omap_video_timings *timings = &dssdev->panel.timings; + int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt); + int ndl = dsi->num_lanes_used - 1; + int dsi_fclk_hsdiv = dssdev->clocks.dsi.regm_dsi + 1; + int hsa_interleave_hs = 0, hsa_interleave_lp = 0; + int hfp_interleave_hs = 0, hfp_interleave_lp = 0; + int hbp_interleave_hs = 0, hbp_interleave_lp = 0; + int bl_interleave_hs = 0, bl_interleave_lp = 0; + u32 r; + + r = dsi_read_reg(dsidev, DSI_CTRL); + blanking_mode = FLD_GET(r, 20, 20); + hfp_blanking_mode = FLD_GET(r, 21, 21); + hbp_blanking_mode = FLD_GET(r, 22, 22); + hsa_blanking_mode = FLD_GET(r, 23, 23); + + r = dsi_read_reg(dsidev, DSI_VM_TIMING1); + hbp = FLD_GET(r, 11, 0); + hfp = FLD_GET(r, 23, 12); + hsa = FLD_GET(r, 31, 24); + + r = dsi_read_reg(dsidev, DSI_CLK_TIMING); + ddr_clk_post = FLD_GET(r, 7, 0); + ddr_clk_pre = FLD_GET(r, 15, 8); + + r = dsi_read_reg(dsidev, DSI_VM_TIMING7); + exit_hs_mode_lat = FLD_GET(r, 15, 0); + enter_hs_mode_lat = FLD_GET(r, 31, 16); + + r = dsi_read_reg(dsidev, DSI_CLK_CTRL); + lp_clk_div = FLD_GET(r, 12, 0); + ddr_alwon = FLD_GET(r, 13, 13); + + r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG0); + ths_exit = FLD_GET(r, 7, 0); + + r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG1); + tclk_trail = FLD_GET(r, 15, 8); + + exiths_clk = ths_exit + tclk_trail; + + width_bytes = DIV_ROUND_UP(timings->x_res * bpp, 8); + bllp = hbp + hfp + hsa + DIV_ROUND_UP(width_bytes + 6, ndl); + + if (!hsa_blanking_mode) { + hsa_interleave_hs = dsi_compute_interleave_hs(hsa, ddr_alwon, + enter_hs_mode_lat, exit_hs_mode_lat, + exiths_clk, ddr_clk_pre, ddr_clk_post); + hsa_interleave_lp = dsi_compute_interleave_lp(hsa, + enter_hs_mode_lat, exit_hs_mode_lat, + lp_clk_div, dsi_fclk_hsdiv); + } + + if (!hfp_blanking_mode) { + hfp_interleave_hs = dsi_compute_interleave_hs(hfp, ddr_alwon, + enter_hs_mode_lat, exit_hs_mode_lat, + exiths_clk, ddr_clk_pre, ddr_clk_post); + hfp_interleave_lp = dsi_compute_interleave_lp(hfp, + enter_hs_mode_lat, exit_hs_mode_lat, + lp_clk_div, dsi_fclk_hsdiv); + } + + if (!hbp_blanking_mode) { + hbp_interleave_hs = dsi_compute_interleave_hs(hbp, ddr_alwon, + enter_hs_mode_lat, exit_hs_mode_lat, + exiths_clk, ddr_clk_pre, ddr_clk_post); + + hbp_interleave_lp = dsi_compute_interleave_lp(hbp, + enter_hs_mode_lat, exit_hs_mode_lat, + lp_clk_div, dsi_fclk_hsdiv); + } + + if (!blanking_mode) { + bl_interleave_hs = dsi_compute_interleave_hs(bllp, ddr_alwon, + enter_hs_mode_lat, exit_hs_mode_lat, + exiths_clk, ddr_clk_pre, ddr_clk_post); + + bl_interleave_lp = dsi_compute_interleave_lp(bllp, + enter_hs_mode_lat, exit_hs_mode_lat, + lp_clk_div, dsi_fclk_hsdiv); + } + + DSSDBG("DSI HS interleaving(TXBYTECLKHS) HSA %d, HFP %d, HBP %d, BLLP %d\n", + hsa_interleave_hs, hfp_interleave_hs, hbp_interleave_hs, + bl_interleave_hs); + + DSSDBG("DSI LP interleaving(bytes) HSA %d, HFP %d, HBP %d, BLLP %d\n", + hsa_interleave_lp, hfp_interleave_lp, hbp_interleave_lp, + bl_interleave_lp); + + r = dsi_read_reg(dsidev, DSI_VM_TIMING4); + r = FLD_MOD(r, hsa_interleave_hs, 23, 16); + r = FLD_MOD(r, hfp_interleave_hs, 15, 8); + r = FLD_MOD(r, hbp_interleave_hs, 7, 0); + dsi_write_reg(dsidev, DSI_VM_TIMING4, r); + + r = dsi_read_reg(dsidev, DSI_VM_TIMING5); + r = FLD_MOD(r, hsa_interleave_lp, 23, 16); + r = FLD_MOD(r, hfp_interleave_lp, 15, 8); + r = FLD_MOD(r, hbp_interleave_lp, 7, 0); + dsi_write_reg(dsidev, DSI_VM_TIMING5, r); + + r = dsi_read_reg(dsidev, DSI_VM_TIMING6); + r = FLD_MOD(r, bl_interleave_hs, 31, 15); + r = FLD_MOD(r, bl_interleave_lp, 16, 0); + dsi_write_reg(dsidev, DSI_VM_TIMING6, r); +} + static int dsi_proto_config(struct omap_dss_device *dssdev) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); @@ -3723,6 +3903,7 @@ static int dsi_proto_config(struct omap_dss_device *dssdev) if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) { dsi_config_vp_sync_events(dssdev); dsi_config_blanking_modes(dssdev); + dsi_config_cmd_mode_interleaving(dssdev); } dsi_vc_initial_config(dsidev, 0); |
