diff options
Diffstat (limited to 'drivers/video')
| -rw-r--r-- | drivers/video/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/video/aty/radeon_pm.c | 19 | ||||
| -rw-r--r-- | drivers/video/fbmem.c | 2 | ||||
| -rw-r--r-- | drivers/video/gbefb.c | 2 | ||||
| -rw-r--r-- | drivers/video/neofb.c | 17 | ||||
| -rw-r--r-- | drivers/video/nvidia/nvidia.c | 2 | ||||
| -rw-r--r-- | drivers/video/s3c2410fb.c | 1 |
7 files changed, 36 insertions, 12 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 3e153d3..e64ed16 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -525,11 +525,6 @@ config FB_GBE_MEM This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. -config BUS_I2C - bool - depends on (FB = y) && VISWS - default y - config FB_SUN3 bool "Sun3 framebuffer support" depends on (FB = y) && (SUN3 || SUN3X) && BROKEN diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 556895e..1f8d805 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -1321,8 +1321,6 @@ static void radeon_pm_full_reset_sdram(struct radeonfb_info *rinfo) mdelay( 15); } -#ifdef CONFIG_PPC_OF - static void radeon_pm_reset_pad_ctlr_strength(struct radeonfb_info *rinfo) { u32 tmp, tmp2; @@ -1836,6 +1834,8 @@ static void radeon_reinitialize_M10(struct radeonfb_info *rinfo) radeon_pm_m10_enable_lvds_spread_spectrum(rinfo); } +#ifdef CONFIG_PPC_OF + static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo) { OUTREG(MC_CNTL, rinfo->save_regs[46]); @@ -2728,13 +2728,23 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk) printk("radeonfb: Dynamic Clock Power Management disabled\n"); } +#if defined(CONFIG_PM) /* Check if we can power manage on suspend/resume. We can do * D2 on M6, M7 and M9, and we can resume from D3 cold a few other * "Mac" cards, but that's all. We need more infos about what the * BIOS does tho. Right now, all this PM stuff is pmac-only for that * reason. --BenH */ -#if defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) + /* Special case for Samsung P35 laptops + */ + if ((rinfo->pdev->vendor == PCI_VENDOR_ID_ATI) && + (rinfo->pdev->device == PCI_CHIP_RV350_NP) && + (rinfo->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG) && + (rinfo->pdev->subsystem_device == 0xc00c)) { + rinfo->reinit_func = radeon_reinitialize_M10; + rinfo->pm_mode |= radeon_pm_off; + } +#if defined(CONFIG_PPC_PMAC) if (_machine == _MACH_Pmac && rinfo->of_node) { if (rinfo->is_mobility && rinfo->pm_reg && rinfo->family <= CHIP_FAMILY_RV250) @@ -2778,7 +2788,8 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk) OUTREG(TV_DAC_CNTL, INREG(TV_DAC_CNTL) | 0x07000000); #endif } -#endif /* defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) */ +#endif /* defined(CONFIG_PPC_PMAC) */ +#endif /* defined(CONFIG_PM) */ } void radeonfb_pm_exit(struct radeonfb_info *rinfo) diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index d2dede6..996c7b5 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1550,6 +1550,7 @@ int fb_get_options(char *name, char **option) return retval; } +#ifndef MODULE /** * video_setup - process command line options * @options: string of options @@ -1593,6 +1594,7 @@ static int __init video_setup(char *options) return 0; } __setup("video=", video_setup); +#endif /* * Visible symbols for modules diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index 38d2272..c9a7cdf 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -1243,7 +1243,7 @@ static int __devexit gbefb_remove(struct platform_device* p_dev) (void *)gbe_tiles.cpu, gbe_tiles.dma); release_mem_region(GBE_BASE, sizeof(struct sgi_gbe)); iounmap(gbe); - gbefb_remove_sysfs(dev); + gbefb_remove_sysfs(&p_dev->dev); framebuffer_release(info); return 0; diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c index 747602a..a2e201d 100644 --- a/drivers/video/neofb.c +++ b/drivers/video/neofb.c @@ -843,6 +843,9 @@ static int neofb_set_par(struct fb_info *info) par->SysIfaceCntl2 = 0xc0; /* VESA Bios sets this to 0x80! */ + /* Initialize: by default, we want display config register to be read */ + par->PanelDispCntlRegRead = 1; + /* Enable any user specified display devices. */ par->PanelDispCntlReg1 = 0x00; if (par->internal_display) @@ -1334,6 +1337,18 @@ static int neofb_blank(int blank_mode, struct fb_info *info) struct neofb_par *par = info->par; int seqflags, lcdflags, dpmsflags, reg; + + /* + * Reload the value stored in the register, if sensible. It might have + * been changed via FN keystroke. + */ + if (par->PanelDispCntlRegRead) { + neoUnlock(); + par->PanelDispCntlReg1 = vga_rgfx(NULL, 0x20) & 0x03; + neoLock(&par->state); + } + par->PanelDispCntlRegRead = !blank_mode; + switch (blank_mode) { case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */ seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */ @@ -1366,7 +1381,7 @@ static int neofb_blank(int blank_mode, struct fb_info *info) case FB_BLANK_NORMAL: /* just blank screen (backlight stays on) */ seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */ lcdflags = par->PanelDispCntlReg1 & 0x02; /* LCD normal */ - dpmsflags = 0; /* no hsync/vsync suppression */ + dpmsflags = 0x00; /* no hsync/vsync suppression */ break; case FB_BLANK_UNBLANK: /* unblank */ seqflags = 0; /* Enable sequencer */ diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c index dbcb896..a7c4e5e8 100644 --- a/drivers/video/nvidia/nvidia.c +++ b/drivers/video/nvidia/nvidia.c @@ -138,6 +138,8 @@ static struct pci_device_id nvidiafb_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_4000, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO, diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index d574dd3..9451932 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -82,7 +82,6 @@ #include <linux/fb.h> #include <linux/init.h> #include <linux/dma-mapping.h> -#include <linux/string.h> #include <linux/interrupt.h> #include <linux/workqueue.h> #include <linux/wait.h> |
