summaryrefslogtreecommitdiffstats
path: root/drivers/video/virgefb.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/virgefb.h')
-rw-r--r--drivers/video/virgefb.h288
1 files changed, 288 insertions, 0 deletions
diff --git a/drivers/video/virgefb.h b/drivers/video/virgefb.h
new file mode 100644
index 0000000..157d66d
--- /dev/null
+++ b/drivers/video/virgefb.h
@@ -0,0 +1,288 @@
+/*
+ * linux/drivers/video/virgefb.h -- CyberVision64 definitions for the
+ * text console driver.
+ *
+ * Copyright (c) 1998 Alan Bair
+ *
+ * This file is based on the initial port to Linux of grf_cvreg.h:
+ *
+ * Copyright (c) 1997 Antonio Santos
+ *
+ * The original work is from the NetBSD CyberVision 64 framebuffer driver
+ * and support files (grf_cv.c, grf_cvreg.h, ite_cv.c):
+ * Permission to use the source of this driver was obtained from the
+ * author Michael Teske by Alan Bair.
+ *
+ * Copyright (c) 1995 Michael Teske
+ *
+ * History:
+ *
+ *
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/* Enhanced register mapping (MMIO mode) */
+
+#define S3_CRTC_ADR 0x03d4
+#define S3_CRTC_DATA 0x03d5
+
+#define S3_REG_LOCK2 0x39
+#define S3_HGC_MODE 0x45
+
+#define S3_HWGC_ORGX_H 0x46
+#define S3_HWGC_ORGX_L 0x47
+#define S3_HWGC_ORGY_H 0x48
+#define S3_HWGC_ORGY_L 0x49
+#define S3_HWGC_DX 0x4e
+#define S3_HWGC_DY 0x4f
+
+#define S3_LAW_CTL 0x58
+
+/**************************************************/
+
+/*
+ * Defines for the used register addresses (mw)
+ *
+ * NOTE: There are some registers that have different addresses when
+ * in mono or color mode. We only support color mode, and thus
+ * some addresses won't work in mono-mode!
+ *
+ * General and VGA-registers taken from retina driver. Fixed a few
+ * bugs in it. (SR and GR read address is Port + 1, NOT Port)
+ *
+ */
+
+/* General Registers: */
+#define GREG_MISC_OUTPUT_R 0x03CC
+#define GREG_MISC_OUTPUT_W 0x03C2
+#define GREG_FEATURE_CONTROL_R 0x03CA
+#define GREG_FEATURE_CONTROL_W 0x03DA
+#define GREG_INPUT_STATUS0_R 0x03C2
+#define GREG_INPUT_STATUS1_R 0x03DA
+
+/* Setup Registers: */
+#define SREG_VIDEO_SUBS_ENABLE 0x03C3 /* virge */
+
+/* Attribute Controller: */
+#define ACT_ADDRESS 0x03C0
+#define ACT_ADDRESS_R 0x03C1
+#define ACT_ADDRESS_W 0x03C0
+#define ACT_ADDRESS_RESET 0x03DA
+#define ACT_ID_PALETTE0 0x00
+#define ACT_ID_PALETTE1 0x01
+#define ACT_ID_PALETTE2 0x02
+#define ACT_ID_PALETTE3 0x03
+#define ACT_ID_PALETTE4 0x04
+#define ACT_ID_PALETTE5 0x05
+#define ACT_ID_PALETTE6 0x06
+#define ACT_ID_PALETTE7 0x07
+#define ACT_ID_PALETTE8 0x08
+#define ACT_ID_PALETTE9 0x09
+#define ACT_ID_PALETTE10 0x0A
+#define ACT_ID_PALETTE11 0x0B
+#define ACT_ID_PALETTE12 0x0C
+#define ACT_ID_PALETTE13 0x0D
+#define ACT_ID_PALETTE14 0x0E
+#define ACT_ID_PALETTE15 0x0F
+#define ACT_ID_ATTR_MODE_CNTL 0x10
+#define ACT_ID_OVERSCAN_COLOR 0x11
+#define ACT_ID_COLOR_PLANE_ENA 0x12
+#define ACT_ID_HOR_PEL_PANNING 0x13
+#define ACT_ID_COLOR_SELECT 0x14 /* virge PX_PADD pixel padding register */
+
+/* Graphics Controller: */
+#define GCT_ADDRESS 0x03CE
+#define GCT_ADDRESS_R 0x03CF
+#define GCT_ADDRESS_W 0x03CF
+#define GCT_ID_SET_RESET 0x00
+#define GCT_ID_ENABLE_SET_RESET 0x01
+#define GCT_ID_COLOR_COMPARE 0x02
+#define GCT_ID_DATA_ROTATE 0x03
+#define GCT_ID_READ_MAP_SELECT 0x04
+#define GCT_ID_GRAPHICS_MODE 0x05
+#define GCT_ID_MISC 0x06
+#define GCT_ID_COLOR_XCARE 0x07
+#define GCT_ID_BITMASK 0x08
+
+/* Sequencer: */
+#define SEQ_ADDRESS 0x03C4
+#define SEQ_ADDRESS_R 0x03C5
+#define SEQ_ADDRESS_W 0x03C5
+#define SEQ_ID_RESET 0x00
+#define SEQ_ID_CLOCKING_MODE 0x01
+#define SEQ_ID_MAP_MASK 0x02
+#define SEQ_ID_CHAR_MAP_SELECT 0x03
+#define SEQ_ID_MEMORY_MODE 0x04
+#define SEQ_ID_UNKNOWN1 0x05
+#define SEQ_ID_UNKNOWN2 0x06
+#define SEQ_ID_UNKNOWN3 0x07
+/* S3 extensions */
+#define SEQ_ID_UNLOCK_EXT 0x08
+#define SEQ_ID_EXT_SEQ_REG9 0x09 /* b7 = 1 extended reg access by MMIO only */
+#define SEQ_ID_BUS_REQ_CNTL 0x0A
+#define SEQ_ID_EXT_MISC_SEQ 0x0B
+#define SEQ_ID_UNKNOWN4 0x0C
+#define SEQ_ID_EXT_SEQ 0x0D
+#define SEQ_ID_UNKNOWN5 0x0E
+#define SEQ_ID_UNKNOWN6 0x0F
+#define SEQ_ID_MCLK_LO 0x10
+#define SEQ_ID_MCLK_HI 0x11
+#define SEQ_ID_DCLK_LO 0x12
+#define SEQ_ID_DCLK_HI 0x13
+#define SEQ_ID_CLKSYN_CNTL_1 0x14
+#define SEQ_ID_CLKSYN_CNTL_2 0x15
+#define SEQ_ID_CLKSYN_TEST_HI 0x16 /* reserved for S3 testing of the */
+#define SEQ_ID_CLKSYN_TEST_LO 0x17 /* internal clock synthesizer */
+#define SEQ_ID_RAMDAC_CNTL 0x18
+#define SEQ_ID_MORE_MAGIC 0x1A
+#define SEQ_ID_SIGNAL_SELECT 0x1C /* new for virge */
+
+/* CRT Controller: */
+#define CRT_ADDRESS 0x03D4
+#define CRT_ADDRESS_R 0x03D5
+#define CRT_ADDRESS_W 0x03D5
+#define CRT_ID_HOR_TOTAL 0x00
+#define CRT_ID_HOR_DISP_ENA_END 0x01
+#define CRT_ID_START_HOR_BLANK 0x02
+#define CRT_ID_END_HOR_BLANK 0x03
+#define CRT_ID_START_HOR_RETR 0x04
+#define CRT_ID_END_HOR_RETR 0x05
+#define CRT_ID_VER_TOTAL 0x06
+#define CRT_ID_OVERFLOW 0x07
+#define CRT_ID_PRESET_ROW_SCAN 0x08
+#define CRT_ID_MAX_SCAN_LINE 0x09
+#define CRT_ID_CURSOR_START 0x0A
+#define CRT_ID_CURSOR_END 0x0B
+#define CRT_ID_START_ADDR_HIGH 0x0C
+#define CRT_ID_START_ADDR_LOW 0x0D
+#define CRT_ID_CURSOR_LOC_HIGH 0x0E
+#define CRT_ID_CURSOR_LOC_LOW 0x0F
+#define CRT_ID_START_VER_RETR 0x10
+#define CRT_ID_END_VER_RETR 0x11
+#define CRT_ID_VER_DISP_ENA_END 0x12
+#define CRT_ID_SCREEN_OFFSET 0x13
+#define CRT_ID_UNDERLINE_LOC 0x14
+#define CRT_ID_START_VER_BLANK 0x15
+#define CRT_ID_END_VER_BLANK 0x16
+#define CRT_ID_MODE_CONTROL 0x17
+#define CRT_ID_LINE_COMPARE 0x18
+#define CRT_ID_GD_LATCH_RBACK 0x22
+#define CRT_ID_ACT_TOGGLE_RBACK 0x24
+#define CRT_ID_ACT_INDEX_RBACK 0x26
+/* S3 extensions: S3 VGA Registers */
+#define CRT_ID_DEVICE_HIGH 0x2D
+#define CRT_ID_DEVICE_LOW 0x2E
+#define CRT_ID_REVISION 0x2F
+#define CRT_ID_CHIP_ID_REV 0x30
+#define CRT_ID_MEMORY_CONF 0x31
+#define CRT_ID_BACKWAD_COMP_1 0x32
+#define CRT_ID_BACKWAD_COMP_2 0x33
+#define CRT_ID_BACKWAD_COMP_3 0x34
+#define CRT_ID_REGISTER_LOCK 0x35
+#define CRT_ID_CONFIG_1 0x36
+#define CRT_ID_CONFIG_2 0x37
+#define CRT_ID_REGISTER_LOCK_1 0x38
+#define CRT_ID_REGISTER_LOCK_2 0x39
+#define CRT_ID_MISC_1 0x3A
+#define CRT_ID_DISPLAY_FIFO 0x3B
+#define CRT_ID_LACE_RETR_START 0x3C
+/* S3 extensions: System Control Registers */
+#define CRT_ID_SYSTEM_CONFIG 0x40
+#define CRT_ID_BIOS_FLAG 0x41
+#define CRT_ID_LACE_CONTROL 0x42
+#define CRT_ID_EXT_MODE 0x43
+#define CRT_ID_HWGC_MODE 0x45 /* HWGC = Hardware Graphics Cursor */
+#define CRT_ID_HWGC_ORIGIN_X_HI 0x46
+#define CRT_ID_HWGC_ORIGIN_X_LO 0x47
+#define CRT_ID_HWGC_ORIGIN_Y_HI 0x48
+#define CRT_ID_HWGC_ORIGIN_Y_LO 0x49
+#define CRT_ID_HWGC_FG_STACK 0x4A
+#define CRT_ID_HWGC_BG_STACK 0x4B
+#define CRT_ID_HWGC_START_AD_HI 0x4C
+#define CRT_ID_HWGC_START_AD_LO 0x4D
+#define CRT_ID_HWGC_DSTART_X 0x4E
+#define CRT_ID_HWGC_DSTART_Y 0x4F
+/* S3 extensions: System Extension Registers */
+#define CRT_ID_EXT_SYS_CNTL_1 0x50 /* NOT a virge register */
+#define CRT_ID_EXT_SYS_CNTL_2 0x51
+#define CRT_ID_EXT_BIOS_FLAG_1 0x52
+#define CRT_ID_EXT_MEM_CNTL_1 0x53
+#define CRT_ID_EXT_MEM_CNTL_2 0x54
+#define CRT_ID_EXT_DAC_CNTL 0x55
+#define CRT_ID_EX_SYNC_1 0x56
+#define CRT_ID_EX_SYNC_2 0x57
+#define CRT_ID_LAW_CNTL 0x58 /* LAW = Linear Address Window */
+#define CRT_ID_LAW_POS_HI 0x59
+#define CRT_ID_LAW_POS_LO 0x5A
+#define CRT_ID_GOUT_PORT 0x5C
+#define CRT_ID_EXT_HOR_OVF 0x5D
+#define CRT_ID_EXT_VER_OVF 0x5E
+#define CRT_ID_EXT_MEM_CNTL_3 0x60 /* NOT a virge register */
+#define CRT_ID_EXT_MEM_CNTL_4 0x61
+#define CRT_ID_EX_SYNC_3 0x63 /* NOT a virge register */
+#define CRT_ID_EXT_MISC_CNTL 0x65
+#define CRT_ID_EXT_MISC_CNTL_1 0x66
+#define CRT_ID_EXT_MISC_CNTL_2 0x67
+#define CRT_ID_CONFIG_3 0x68
+#define CRT_ID_EXT_SYS_CNTL_3 0x69
+#define CRT_ID_EXT_SYS_CNTL_4 0x6A
+#define CRT_ID_EXT_BIOS_FLAG_3 0x6B
+#define CRT_ID_EXT_BIOS_FLAG_4 0x6C
+/* S3 virge extensions: more System Extension Registers */
+#define CRT_ID_EXT_BIOS_FLAG_5 0x6D
+#define CRT_ID_EXT_DAC_TEST 0x6E
+#define CRT_ID_CONFIG_4 0x6F
+
+/* Video DAC */
+#define VDAC_ADDRESS 0x03c8
+#define VDAC_ADDRESS_W 0x03c8
+#define VDAC_ADDRESS_R 0x03c7
+#define VDAC_STATE 0x03c7
+#define VDAC_DATA 0x03c9
+#define VDAC_MASK 0x03c6
+
+/* Miscellaneous Registers */
+#define MR_SUBSYSTEM_STATUS_R 0x8504 /* new for virge */
+#define MR_SUBSYSTEM_CNTL_W 0x8504 /* new for virge */
+#define MR_ADVANCED_FUNCTION_CONTROL 0x850C /* new for virge */
+
+/* Blitter */
+#define BLT_COMMAND_SET 0xA500
+#define BLT_SIZE_X_Y 0xA504
+#define BLT_SRC_X_Y 0xA508
+#define BLT_DEST_X_Y 0xA50C
+
+#define BLT_SRC_BASE 0xa4d4
+#define BLT_DEST_BASE 0xa4d8
+#define BLT_CLIP_LEFT_RIGHT 0xa4dc
+#define BLT_CLIP_TOP_BOTTOM 0xa4e0
+#define BLT_SRC_DEST_STRIDE 0xa4e4
+#define BLT_MONO_PATTERN_0 0xa4e8
+#define BLT_MONO_PATTERN_1 0xa4ec
+#define BLT_PATTERN_COLOR 0xa4f4
+
+#define L2D_COMMAND_SET 0xA900
+#define L2D_CLIP_LEFT_RIGHT 0xA8DC
+#define L2D_CLIP_TOP_BOTTOM 0xA8E0
+
+#define P2D_COMMAND_SET 0xAD00
+#define P2D_CLIP_LEFT_RIGHT 0xACDC
+#define P2D_CLIP_TOP_BOTTOM 0xACE0
+
+#define CMD_NOP (0xf << 27) /* %1111 << 27, was 0x07 */
+#define S3V_BITBLT (0x0 << 27)
+#define S3V_RECTFILL (0x2 << 27)
+#define S3V_AUTOEXE 0x01
+#define S3V_HWCLIP 0x02
+#define S3V_DRAW 0x20
+#define S3V_DST_8BPP 0x00
+#define S3V_DST_16BPP 0x04
+#define S3V_DST_24BPP 0x08
+#define S3V_MONO_PAT 0x100
+
+#define S3V_BLT_COPY (0xcc<<17)
+#define S3V_BLT_CLEAR (0x00<<17)
+#define S3V_BLT_SET (0xff<<17)
OpenPOWER on IntegriCloud