summaryrefslogtreecommitdiffstats
path: root/drivers/video/sgivwfb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/sgivwfb.c')
-rw-r--r--drivers/video/sgivwfb.c901
1 files changed, 901 insertions, 0 deletions
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
new file mode 100644
index 0000000..8413907
--- /dev/null
+++ b/drivers/video/sgivwfb.c
@@ -0,0 +1,901 @@
+/*
+ * linux/drivers/video/sgivwfb.c -- SGI DBE frame buffer device
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Jeffrey Newquist, newquist@engr.sgi.som
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <asm/mtrr.h>
+
+#define INCLUDE_TIMING_TABLE_DATA
+#define DBE_REG_BASE par->regs
+#include <video/sgivw.h>
+
+struct sgivw_par {
+ struct asregs *regs;
+ u32 cmap_fifo;
+ u_long timing_num;
+};
+
+#define FLATPANEL_SGI_1600SW 5
+
+/*
+ * RAM we reserve for the frame buffer. This defines the maximum screen
+ * size
+ *
+ * The default can be overridden if the driver is compiled as a module
+ */
+
+/* set by arch/i386/kernel/setup.c */
+extern unsigned long sgivwfb_mem_phys;
+extern unsigned long sgivwfb_mem_size;
+
+static int ypan = 0;
+static int ywrap = 0;
+
+static int flatpanel_id = -1;
+
+static struct fb_fix_screeninfo sgivwfb_fix __initdata = {
+ .id = "SGI Vis WS FB",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_PSEUDOCOLOR,
+ .mmio_start = DBE_REG_PHYS,
+ .mmio_len = DBE_REG_SIZE,
+ .accel = FB_ACCEL_NONE,
+ .line_length = 640,
+};
+
+static struct fb_var_screeninfo sgivwfb_var __initdata = {
+ /* 640x480, 8 bpp */
+ .xres = 640,
+ .yres = 480,
+ .xres_virtual = 640,
+ .yres_virtual = 480,
+ .bits_per_pixel = 8,
+ .red = { 0, 8, 0 },
+ .green = { 0, 8, 0 },
+ .blue = { 0, 8, 0 },
+ .height = -1,
+ .width = -1,
+ .pixclock = 20000,
+ .left_margin = 64,
+ .right_margin = 64,
+ .upper_margin = 32,
+ .lower_margin = 32,
+ .hsync_len = 64,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+static struct fb_var_screeninfo sgivwfb_var1600sw __initdata = {
+ /* 1600x1024, 8 bpp */
+ .xres = 1600,
+ .yres = 1024,
+ .xres_virtual = 1600,
+ .yres_virtual = 1024,
+ .bits_per_pixel = 8,
+ .red = { 0, 8, 0 },
+ .green = { 0, 8, 0 },
+ .blue = { 0, 8, 0 },
+ .height = -1,
+ .width = -1,
+ .pixclock = 9353,
+ .left_margin = 20,
+ .right_margin = 30,
+ .upper_margin = 37,
+ .lower_margin = 3,
+ .hsync_len = 20,
+ .vsync_len = 3,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+/*
+ * Interface used by the world
+ */
+int sgivwfb_init(void);
+
+static int sgivwfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
+static int sgivwfb_set_par(struct fb_info *info);
+static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
+ u_int blue, u_int transp,
+ struct fb_info *info);
+static int sgivwfb_mmap(struct fb_info *info, struct file *file,
+ struct vm_area_struct *vma);
+
+static struct fb_ops sgivwfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = sgivwfb_check_var,
+ .fb_set_par = sgivwfb_set_par,
+ .fb_setcolreg = sgivwfb_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_cursor = soft_cursor,
+ .fb_mmap = sgivwfb_mmap,
+};
+
+/*
+ * Internal routines
+ */
+static unsigned long bytes_per_pixel(int bpp)
+{
+ switch (bpp) {
+ case 8:
+ return 1;
+ case 16:
+ return 2;
+ case 32:
+ return 4;
+ default:
+ printk(KERN_INFO "sgivwfb: unsupported bpp %d\n", bpp);
+ return 0;
+ }
+}
+
+static unsigned long get_line_length(int xres_virtual, int bpp)
+{
+ return (xres_virtual * bytes_per_pixel(bpp));
+}
+
+/*
+ * Function: dbe_TurnOffDma
+ * Parameters: (None)
+ * Description: This should turn off the monitor and dbe. This is used
+ * when switching between the serial console and the graphics
+ * console.
+ */
+
+static void dbe_TurnOffDma(struct sgivw_par *par)
+{
+ unsigned int readVal;
+ int i;
+
+ // Check to see if things are already turned off:
+ // 1) Check to see if dbe is not using the internal dotclock.
+ // 2) Check to see if the xy counter in dbe is already off.
+
+ DBE_GETREG(ctrlstat, readVal);
+ if (GET_DBE_FIELD(CTRLSTAT, PCLKSEL, readVal) < 2)
+ return;
+
+ DBE_GETREG(vt_xy, readVal);
+ if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1)
+ return;
+
+ // Otherwise, turn off dbe
+
+ DBE_GETREG(ovr_control, readVal);
+ SET_DBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, readVal, 0);
+ DBE_SETREG(ovr_control, readVal);
+ udelay(1000);
+ DBE_GETREG(frm_control, readVal);
+ SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, readVal, 0);
+ DBE_SETREG(frm_control, readVal);
+ udelay(1000);
+ DBE_GETREG(did_control, readVal);
+ SET_DBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, readVal, 0);
+ DBE_SETREG(did_control, readVal);
+ udelay(1000);
+
+ // XXX HACK:
+ //
+ // This was necessary for GBE--we had to wait through two
+ // vertical retrace periods before the pixel DMA was
+ // turned off for sure. I've left this in for now, in
+ // case dbe needs it.
+
+ for (i = 0; i < 10000; i++) {
+ DBE_GETREG(frm_inhwctrl, readVal);
+ if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) ==
+ 0)
+ udelay(10);
+ else {
+ DBE_GETREG(ovr_inhwctrl, readVal);
+ if (GET_DBE_FIELD
+ (OVR_INHWCTRL, OVR_DMA_ENABLE, readVal) == 0)
+ udelay(10);
+ else {
+ DBE_GETREG(did_inhwctrl, readVal);
+ if (GET_DBE_FIELD
+ (DID_INHWCTRL, DID_DMA_ENABLE,
+ readVal) == 0)
+ udelay(10);
+ else
+ break;
+ }
+ }
+ }
+}
+
+/*
+ * Set the User Defined Part of the Display. Again if par use it to get
+ * real video mode.
+ */
+static int sgivwfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct sgivw_par *par = (struct sgivw_par *)info->par;
+ struct dbe_timing_info *timing;
+ u_long line_length;
+ u_long min_mode;
+ int req_dot;
+ int test_mode;
+
+ /*
+ * FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
+ * as FB_VMODE_SMOOTH_XPAN is only used internally
+ */
+
+ if (var->vmode & FB_VMODE_CONUPDATE) {
+ var->vmode |= FB_VMODE_YWRAP;
+ var->xoffset = info->var.xoffset;
+ var->yoffset = info->var.yoffset;
+ }
+
+ /* XXX FIXME - forcing var's */
+ var->xoffset = 0;
+ var->yoffset = 0;
+
+ /* Limit bpp to 8, 16, and 32 */
+ if (var->bits_per_pixel <= 8)
+ var->bits_per_pixel = 8;
+ else if (var->bits_per_pixel <= 16)
+ var->bits_per_pixel = 16;
+ else if (var->bits_per_pixel <= 32)
+ var->bits_per_pixel = 32;
+ else
+ return -EINVAL;
+
+ var->grayscale = 0; /* No grayscale for now */
+
+ /* determine valid resolution and timing */
+ for (min_mode = 0; min_mode < DBE_VT_SIZE; min_mode++) {
+ if (dbeVTimings[min_mode].width >= var->xres &&
+ dbeVTimings[min_mode].height >= var->yres)
+ break;
+ }
+
+ if (min_mode == DBE_VT_SIZE)
+ return -EINVAL; /* Resolution to high */
+
+ /* XXX FIXME - should try to pick best refresh rate */
+ /* for now, pick closest dot-clock within 3MHz */
+ req_dot = PICOS2KHZ(var->pixclock);
+ printk(KERN_INFO "sgivwfb: requested pixclock=%d ps (%d KHz)\n",
+ var->pixclock, req_dot);
+ test_mode = min_mode;
+ while (dbeVTimings[min_mode].width == dbeVTimings[test_mode].width) {
+ if (dbeVTimings[test_mode].cfreq + 3000 > req_dot)
+ break;
+ test_mode++;
+ }
+ if (dbeVTimings[min_mode].width != dbeVTimings[test_mode].width)
+ test_mode--;
+ min_mode = test_mode;
+ timing = &dbeVTimings[min_mode];
+ printk(KERN_INFO "sgivwfb: granted dot-clock=%d KHz\n", timing->cfreq);
+
+ /* Adjust virtual resolution, if necessary */
+ if (var->xres > var->xres_virtual || (!ywrap && !ypan))
+ var->xres_virtual = var->xres;
+ if (var->yres > var->yres_virtual || (!ywrap && !ypan))
+ var->yres_virtual = var->yres;
+
+ /*
+ * Memory limit
+ */
+ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
+ if (line_length * var->yres_virtual > sgivwfb_mem_size)
+ return -ENOMEM; /* Virtual resolution to high */
+
+ info->fix.line_length = line_length;
+
+ switch (var->bits_per_pixel) {
+ case 8:
+ var->red.offset = 0;
+ var->red.length = 8;
+ var->green.offset = 0;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 16: /* RGBA 5551 */
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 6;
+ var->green.length = 5;
+ var->blue.offset = 1;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 32: /* RGB 8888 */
+ var->red.offset = 0;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 16;
+ var->blue.length = 8;
+ var->transp.offset = 24;
+ var->transp.length = 8;
+ break;
+ }
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ var->transp.msb_right = 0;
+
+ /* set video timing information */
+ var->pixclock = KHZ2PICOS(timing->cfreq);
+ var->left_margin = timing->htotal - timing->hsync_end;
+ var->right_margin = timing->hsync_start - timing->width;
+ var->upper_margin = timing->vtotal - timing->vsync_end;
+ var->lower_margin = timing->vsync_start - timing->height;
+ var->hsync_len = timing->hsync_end - timing->hsync_start;
+ var->vsync_len = timing->vsync_end - timing->vsync_start;
+
+ /* Ouch. This breaks the rules but timing_num is only important if you
+ * change a video mode */
+ par->timing_num = min_mode;
+
+ printk(KERN_INFO "sgivwfb: new video mode xres=%d yres=%d bpp=%d\n",
+ var->xres, var->yres, var->bits_per_pixel);
+ printk(KERN_INFO " vxres=%d vyres=%d\n", var->xres_virtual,
+ var->yres_virtual);
+ return 0;
+}
+
+/*
+ * Setup flatpanel related registers.
+ */
+static void sgivwfb_setup_flatpanel(struct sgivw_par *par, struct dbe_timing_info *currentTiming)
+{
+ int fp_wid, fp_hgt, fp_vbs, fp_vbe;
+ u32 outputVal = 0;
+
+ SET_DBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal,
+ (currentTiming->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1);
+ SET_DBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal,
+ (currentTiming->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1);
+ DBE_SETREG(vt_flags, outputVal);
+
+ /* Turn on the flat panel */
+ switch (flatpanel_id) {
+ case FLATPANEL_SGI_1600SW:
+ fp_wid = 1600;
+ fp_hgt = 1024;
+ fp_vbs = 0;
+ fp_vbe = 1600;
+ currentTiming->pll_m = 4;
+ currentTiming->pll_n = 1;
+ currentTiming->pll_p = 0;
+ break;
+ default:
+ fp_wid = fp_hgt = fp_vbs = fp_vbe = 0xfff;
+ }
+
+ outputVal = 0;
+ SET_DBE_FIELD(FP_DE, FP_DE_ON, outputVal, fp_vbs);
+ SET_DBE_FIELD(FP_DE, FP_DE_OFF, outputVal, fp_vbe);
+ DBE_SETREG(fp_de, outputVal);
+ outputVal = 0;
+ SET_DBE_FIELD(FP_HDRV, FP_HDRV_OFF, outputVal, fp_wid);
+ DBE_SETREG(fp_hdrv, outputVal);
+ outputVal = 0;
+ SET_DBE_FIELD(FP_VDRV, FP_VDRV_ON, outputVal, 1);
+ SET_DBE_FIELD(FP_VDRV, FP_VDRV_OFF, outputVal, fp_hgt + 1);
+ DBE_SETREG(fp_vdrv, outputVal);
+}
+
+/*
+ * Set the hardware according to 'par'.
+ */
+static int sgivwfb_set_par(struct fb_info *info)
+{
+ struct sgivw_par *par = info->par;
+ int i, j, htmp, temp;
+ u32 readVal, outputVal;
+ int wholeTilesX, maxPixelsPerTileX;
+ int frmWrite1, frmWrite2, frmWrite3b;
+ struct dbe_timing_info *currentTiming; /* Current Video Timing */
+ int xpmax, ypmax; // Monitor resolution
+ int bytesPerPixel; // Bytes per pixel
+
+ currentTiming = &dbeVTimings[par->timing_num];
+ bytesPerPixel = bytes_per_pixel(info->var.bits_per_pixel);
+ xpmax = currentTiming->width;
+ ypmax = currentTiming->height;
+
+ /* dbe_InitGraphicsBase(); */
+ /* Turn on dotclock PLL */
+ DBE_SETREG(ctrlstat, 0x20000000);
+
+ dbe_TurnOffDma(par);
+
+ /* dbe_CalculateScreenParams(); */
+ maxPixelsPerTileX = 512 / bytesPerPixel;
+ wholeTilesX = xpmax / maxPixelsPerTileX;
+ if (wholeTilesX * maxPixelsPerTileX < xpmax)
+ wholeTilesX++;
+
+ printk(KERN_DEBUG "sgivwfb: pixPerTile=%d wholeTilesX=%d\n",
+ maxPixelsPerTileX, wholeTilesX);
+
+ /* dbe_InitGammaMap(); */
+ udelay(10);
+
+ for (i = 0; i < 256; i++) {
+ DBE_ISETREG(gmap, i, (i << 24) | (i << 16) | (i << 8));
+ }
+
+ /* dbe_TurnOn(); */
+ DBE_GETREG(vt_xy, readVal);
+ if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) {
+ DBE_SETREG(vt_xy, 0x00000000);
+ udelay(1);
+ } else
+ dbe_TurnOffDma(par);
+
+ /* dbe_Initdbe(); */
+ for (i = 0; i < 256; i++) {
+ for (j = 0; j < 100; j++) {
+ DBE_GETREG(cm_fifo, readVal);
+ if (readVal != 0x00000000)
+ break;
+ else
+ udelay(10);
+ }
+
+ // DBE_ISETREG(cmap, i, 0x00000000);
+ DBE_ISETREG(cmap, i, (i << 8) | (i << 16) | (i << 24));
+ }
+
+ /* dbe_InitFramebuffer(); */
+ frmWrite1 = 0;
+ SET_DBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, frmWrite1,
+ wholeTilesX);
+ SET_DBE_FIELD(FRM_SIZE_TILE, FRM_RHS, frmWrite1, 0);
+
+ switch (bytesPerPixel) {
+ case 1:
+ SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
+ DBE_FRM_DEPTH_8);
+ break;
+ case 2:
+ SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
+ DBE_FRM_DEPTH_16);
+ break;
+ case 4:
+ SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
+ DBE_FRM_DEPTH_32);
+ break;
+ }
+
+ frmWrite2 = 0;
+ SET_DBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, frmWrite2, ypmax);
+
+ // Tell dbe about the framebuffer location and type
+ // XXX What format is the FRM_TILE_PTR?? 64K aligned address?
+ frmWrite3b = 0;
+ SET_DBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, frmWrite3b,
+ sgivwfb_mem_phys >> 9);
+ SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, frmWrite3b, 1);
+ SET_DBE_FIELD(FRM_CONTROL, FRM_LINEAR, frmWrite3b, 1);
+
+ /* Initialize DIDs */
+
+ outputVal = 0;
+ switch (bytesPerPixel) {
+ case 1:
+ SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_I8);
+ break;
+ case 2:
+ SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGBA5);
+ break;
+ case 4:
+ SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGB8);
+ break;
+ }
+ SET_DBE_FIELD(WID, BUF, outputVal, DBE_BMODE_BOTH);
+
+ for (i = 0; i < 32; i++) {
+ DBE_ISETREG(mode_regs, i, outputVal);
+ }
+
+ /* dbe_InitTiming(); */
+ DBE_SETREG(vt_intr01, 0xffffffff);
+ DBE_SETREG(vt_intr23, 0xffffffff);
+
+ DBE_GETREG(dotclock, readVal);
+ DBE_SETREG(dotclock, readVal & 0xffff);
+
+ DBE_SETREG(vt_xymax, 0x00000000);
+ outputVal = 0;
+ SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_ON, outputVal,
+ currentTiming->vsync_start);
+ SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_OFF, outputVal,
+ currentTiming->vsync_end);
+ DBE_SETREG(vt_vsync, outputVal);
+ outputVal = 0;
+ SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_ON, outputVal,
+ currentTiming->hsync_start);
+ SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_OFF, outputVal,
+ currentTiming->hsync_end);
+ DBE_SETREG(vt_hsync, outputVal);
+ outputVal = 0;
+ SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_ON, outputVal,
+ currentTiming->vblank_start);
+ SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_OFF, outputVal,
+ currentTiming->vblank_end);
+ DBE_SETREG(vt_vblank, outputVal);
+ outputVal = 0;
+ SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_ON, outputVal,
+ currentTiming->hblank_start);
+ SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_OFF, outputVal,
+ currentTiming->hblank_end - 3);
+ DBE_SETREG(vt_hblank, outputVal);
+ outputVal = 0;
+ SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_ON, outputVal,
+ currentTiming->vblank_start);
+ SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_OFF, outputVal,
+ currentTiming->vblank_end);
+ DBE_SETREG(vt_vcmap, outputVal);
+ outputVal = 0;
+ SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_ON, outputVal,
+ currentTiming->hblank_start);
+ SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_OFF, outputVal,
+ currentTiming->hblank_end - 3);
+ DBE_SETREG(vt_hcmap, outputVal);
+
+ if (flatpanel_id != -1)
+ sgivwfb_setup_flatpanel(par, currentTiming);
+
+ outputVal = 0;
+ temp = currentTiming->vblank_start - currentTiming->vblank_end - 1;
+ if (temp > 0)
+ temp = -temp;
+
+ SET_DBE_FIELD(DID_START_XY, DID_STARTY, outputVal, (u32) temp);
+ if (currentTiming->hblank_end >= 20)
+ SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
+ currentTiming->hblank_end - 20);
+ else
+ SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
+ currentTiming->htotal - (20 -
+ currentTiming->
+ hblank_end));
+ DBE_SETREG(did_start_xy, outputVal);
+
+ outputVal = 0;
+ SET_DBE_FIELD(CRS_START_XY, CRS_STARTY, outputVal,
+ (u32) (temp + 1));
+ if (currentTiming->hblank_end >= DBE_CRS_MAGIC)
+ SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
+ currentTiming->hblank_end - DBE_CRS_MAGIC);
+ else
+ SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
+ currentTiming->htotal - (DBE_CRS_MAGIC -
+ currentTiming->
+ hblank_end));
+ DBE_SETREG(crs_start_xy, outputVal);
+
+ outputVal = 0;
+ SET_DBE_FIELD(VC_START_XY, VC_STARTY, outputVal, (u32) temp);
+ SET_DBE_FIELD(VC_START_XY, VC_STARTX, outputVal,
+ currentTiming->hblank_end - 4);
+ DBE_SETREG(vc_start_xy, outputVal);
+
+ DBE_SETREG(frm_size_tile, frmWrite1);
+ DBE_SETREG(frm_size_pixel, frmWrite2);
+
+ outputVal = 0;
+ SET_DBE_FIELD(DOTCLK, M, outputVal, currentTiming->pll_m - 1);
+ SET_DBE_FIELD(DOTCLK, N, outputVal, currentTiming->pll_n - 1);
+ SET_DBE_FIELD(DOTCLK, P, outputVal, currentTiming->pll_p);
+ SET_DBE_FIELD(DOTCLK, RUN, outputVal, 1);
+ DBE_SETREG(dotclock, outputVal);
+
+ udelay(11 * 1000);
+
+ DBE_SETREG(vt_vpixen, 0xffffff);
+ DBE_SETREG(vt_hpixen, 0xffffff);
+
+ outputVal = 0;
+ SET_DBE_FIELD(VT_XYMAX, VT_MAXX, outputVal, currentTiming->htotal);
+ SET_DBE_FIELD(VT_XYMAX, VT_MAXY, outputVal, currentTiming->vtotal);
+ DBE_SETREG(vt_xymax, outputVal);
+
+ outputVal = frmWrite1;
+ SET_DBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, outputVal, 1);
+ DBE_SETREG(frm_size_tile, outputVal);
+ DBE_SETREG(frm_size_tile, frmWrite1);
+
+ outputVal = 0;
+ SET_DBE_FIELD(OVR_WIDTH_TILE, OVR_FIFO_RESET, outputVal, 1);
+ DBE_SETREG(ovr_width_tile, outputVal);
+ DBE_SETREG(ovr_width_tile, 0);
+
+ DBE_SETREG(frm_control, frmWrite3b);
+ DBE_SETREG(did_control, 0);
+
+ // Wait for dbe to take frame settings
+ for (i = 0; i < 100000; i++) {
+ DBE_GETREG(frm_inhwctrl, readVal);
+ if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) !=
+ 0)
+ break;
+ else
+ udelay(1);
+ }
+
+ if (i == 100000)
+ printk(KERN_INFO
+ "sgivwfb: timeout waiting for frame DMA enable.\n");
+
+ outputVal = 0;
+ htmp = currentTiming->hblank_end - 19;
+ if (htmp < 0)
+ htmp += currentTiming->htotal; /* allow blank to wrap around */
+ SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_ON, outputVal, htmp);
+ SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_OFF, outputVal,
+ ((htmp + currentTiming->width -
+ 2) % currentTiming->htotal));
+ DBE_SETREG(vt_hpixen, outputVal);
+
+ outputVal = 0;
+ SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_OFF, outputVal,
+ currentTiming->vblank_start);
+ SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_ON, outputVal,
+ currentTiming->vblank_end);
+ DBE_SETREG(vt_vpixen, outputVal);
+
+ // Turn off mouse cursor
+ par->regs->crs_ctl = 0;
+
+ // XXX What's this section for??
+ DBE_GETREG(ctrlstat, readVal);
+ readVal &= 0x02000000;
+
+ if (readVal != 0) {
+ DBE_SETREG(ctrlstat, 0x30000000);
+ }
+ return 0;
+}
+
+/*
+ * Set a single color register. The values supplied are already
+ * rounded down to the hardware's capabilities (according to the
+ * entries in the var structure). Return != 0 for invalid regno.
+ */
+
+static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
+ u_int blue, u_int transp,
+ struct fb_info *info)
+{
+ struct sgivw_par *par = (struct sgivw_par *) info->par;
+
+ if (regno > 255)
+ return 1;
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ /* wait for the color map FIFO to have a free entry */
+ while (par->cmap_fifo == 0)
+ par->cmap_fifo = par->regs->cm_fifo;
+
+ par->regs->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
+ par->cmap_fifo--; /* assume FIFO is filling up */
+ return 0;
+}
+
+static int sgivwfb_mmap(struct fb_info *info, struct file *file,
+ struct vm_area_struct *vma)
+{
+ unsigned long size = vma->vm_end - vma->vm_start;
+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+
+ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+ return -EINVAL;
+ if (offset + size > sgivwfb_mem_size)
+ return -EINVAL;
+ offset += sgivwfb_mem_phys;
+ pgprot_val(vma->vm_page_prot) =
+ pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
+ vma->vm_flags |= VM_IO;
+ if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT,
+ size, vma->vm_page_prot))
+ return -EAGAIN;
+ vma->vm_file = file;
+ printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n",
+ offset, vma->vm_start);
+ return 0;
+}
+
+int __init sgivwfb_setup(char *options)
+{
+ char *this_opt;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!strncmp(this_opt, "monitor:", 8)) {
+ if (!strncmp(this_opt + 8, "crt", 3))
+ flatpanel_id = -1;
+ else if (!strncmp(this_opt + 8, "1600sw", 6))
+ flatpanel_id = FLATPANEL_SGI_1600SW;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Initialisation
+ */
+static void sgivwfb_release(struct device *device)
+{
+}
+
+static int __init sgivwfb_probe(struct device *device)
+{
+ struct platform_device *dev = to_platform_device(device);
+ struct sgivw_par *par;
+ struct fb_info *info;
+ char *monitor;
+
+ info = framebuffer_alloc(sizeof(struct sgivw_par) + sizeof(u32) * 256, &dev->dev);
+ if (!info)
+ return -ENOMEM;
+ par = info->par;
+
+ if (!request_mem_region(DBE_REG_PHYS, DBE_REG_SIZE, "sgivwfb")) {
+ printk(KERN_ERR "sgivwfb: couldn't reserve mmio region\n");
+ framebuffer_release(info);
+ return -EBUSY;
+ }
+
+ par->regs = (struct asregs *) ioremap_nocache(DBE_REG_PHYS, DBE_REG_SIZE);
+ if (!par->regs) {
+ printk(KERN_ERR "sgivwfb: couldn't ioremap registers\n");
+ goto fail_ioremap_regs;
+ }
+
+ mtrr_add(sgivwfb_mem_phys, sgivwfb_mem_size, MTRR_TYPE_WRCOMB, 1);
+
+ sgivwfb_fix.smem_start = sgivwfb_mem_phys;
+ sgivwfb_fix.smem_len = sgivwfb_mem_size;
+ sgivwfb_fix.ywrapstep = ywrap;
+ sgivwfb_fix.ypanstep = ypan;
+
+ info->fix = sgivwfb_fix;
+
+ switch (flatpanel_id) {
+ case FLATPANEL_SGI_1600SW:
+ info->var = sgivwfb_var1600sw;
+ monitor = "SGI 1600SW flatpanel";
+ break;
+ default:
+ info->var = sgivwfb_var;
+ monitor = "CRT";
+ }
+
+ printk(KERN_INFO "sgivwfb: %s monitor selected\n", monitor);
+
+ info->fbops = &sgivwfb_ops;
+ info->pseudo_palette = (void *) (par + 1);
+ info->flags = FBINFO_DEFAULT;
+
+ info->screen_base = ioremap_nocache((unsigned long) sgivwfb_mem_phys, sgivwfb_mem_size);
+ if (!info->screen_base) {
+ printk(KERN_ERR "sgivwfb: couldn't ioremap screen_base\n");
+ goto fail_ioremap_fbmem;
+ }
+
+ if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
+ goto fail_color_map;
+
+ if (register_framebuffer(info) < 0) {
+ printk(KERN_ERR "sgivwfb: couldn't register framebuffer\n");
+ goto fail_register_framebuffer;
+ }
+
+ dev_set_drvdata(&dev->dev, info);
+
+ printk(KERN_INFO "fb%d: SGI DBE frame buffer device, using %ldK of video memory at %#lx\n",
+ info->node, sgivwfb_mem_size >> 10, sgivwfb_mem_phys);
+ return 0;
+
+fail_register_framebuffer:
+ fb_dealloc_cmap(&info->cmap);
+fail_color_map:
+ iounmap((char *) info->screen_base);
+fail_ioremap_fbmem:
+ iounmap(par->regs);
+fail_ioremap_regs:
+ release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
+ framebuffer_release(info);
+ return -ENXIO;
+}
+
+static int sgivwfb_remove(struct device *device)
+{
+ struct fb_info *info = dev_get_drvdata(device);
+
+ if (info) {
+ struct sgivw_par *par = info->par;
+
+ unregister_framebuffer(info);
+ dbe_TurnOffDma(par);
+ iounmap(par->regs);
+ iounmap(info->screen_base);
+ release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
+ }
+ return 0;
+}
+
+static struct device_driver sgivwfb_driver = {
+ .name = "sgivwfb",
+ .bus = &platform_bus_type,
+ .probe = sgivwfb_probe,
+ .remove = sgivwfb_remove,
+};
+
+static struct platform_device sgivwfb_device = {
+ .name = "sgivwfb",
+ .id = 0,
+ .dev = {
+ .release = sgivwfb_release,
+ }
+};
+
+int __init sgivwfb_init(void)
+{
+ int ret;
+
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("sgivwfb", &option))
+ return -ENODEV;
+ sgivwfb_setup(option);
+#endif
+ ret = driver_register(&sgivwfb_driver);
+ if (!ret) {
+ ret = platform_device_register(&sgivwfb_device);
+ if (ret)
+ driver_unregister(&sgivwfb_driver);
+ }
+ return ret;
+}
+
+module_init(sgivwfb_init);
+
+#ifdef MODULE
+MODULE_LICENSE("GPL");
+
+static void __exit sgivwfb_exit(void)
+{
+ platform_device_unregister(&sgivwfb_device);
+ driver_unregister(&sgivwfb_driver);
+}
+
+module_exit(sgivwfb_exit);
+
+#endif /* MODULE */
OpenPOWER on IntegriCloud