summaryrefslogtreecommitdiffstats
path: root/drivers/video/gbefb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/gbefb.c')
-rw-r--r--drivers/video/gbefb.c1280
1 files changed, 1280 insertions, 0 deletions
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
new file mode 100644
index 0000000..2a02328
--- /dev/null
+++ b/drivers/video/gbefb.c
@@ -0,0 +1,1280 @@
+/*
+ * SGI GBE frame buffer driver
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc. - Jeffrey Newquist
+ * Copyright (C) 2002 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+
+#ifdef CONFIG_X86
+#include <asm/mtrr.h>
+#endif
+#ifdef CONFIG_MIPS
+#include <asm/addrspace.h>
+#endif
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/tlbflush.h>
+
+#include <video/gbe.h>
+
+static struct sgi_gbe *gbe;
+
+struct gbefb_par {
+ struct fb_var_screeninfo var;
+ struct gbe_timing_info timing;
+ int valid;
+};
+
+#ifdef CONFIG_SGI_IP32
+#define GBE_BASE 0x16000000 /* SGI O2 */
+#endif
+
+#ifdef CONFIG_X86_VISWS
+#define GBE_BASE 0xd0000000 /* SGI Visual Workstation */
+#endif
+
+/* macro for fastest write-though access to the framebuffer */
+#ifdef CONFIG_MIPS
+#ifdef CONFIG_CPU_R10000
+#define pgprot_fb(_prot) (((_prot) & (~_CACHE_MASK)) | _CACHE_UNCACHED_ACCELERATED)
+#else
+#define pgprot_fb(_prot) (((_prot) & (~_CACHE_MASK)) | _CACHE_CACHABLE_NO_WA)
+#endif
+#endif
+#ifdef CONFIG_X86
+#define pgprot_fb(_prot) ((_prot) | _PAGE_PCD)
+#endif
+
+/*
+ * RAM we reserve for the frame buffer. This defines the maximum screen
+ * size
+ */
+#if CONFIG_FB_GBE_MEM > 8
+#error GBE Framebuffer cannot use more than 8MB of memory
+#endif
+
+#define TILE_SHIFT 16
+#define TILE_SIZE (1 << TILE_SHIFT)
+#define TILE_MASK (TILE_SIZE - 1)
+
+static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024;
+static void *gbe_mem;
+static dma_addr_t gbe_dma_addr;
+unsigned long gbe_mem_phys;
+
+static struct {
+ uint16_t *cpu;
+ dma_addr_t dma;
+} gbe_tiles;
+
+static int gbe_revision;
+
+static int ypan, ywrap;
+
+static uint32_t pseudo_palette[256];
+
+static char *mode_option __initdata = NULL;
+
+/* default CRT mode */
+static struct fb_var_screeninfo default_var_CRT __initdata = {
+ /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
+ .xres = 640,
+ .yres = 480,
+ .xres_virtual = 640,
+ .yres_virtual = 480,
+ .xoffset = 0,
+ .yoffset = 0,
+ .bits_per_pixel = 8,
+ .grayscale = 0,
+ .red = { 0, 8, 0 },
+ .green = { 0, 8, 0 },
+ .blue = { 0, 8, 0 },
+ .transp = { 0, 0, 0 },
+ .nonstd = 0,
+ .activate = 0,
+ .height = -1,
+ .width = -1,
+ .accel_flags = 0,
+ .pixclock = 39722, /* picoseconds */
+ .left_margin = 48,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+/* default LCD mode */
+static struct fb_var_screeninfo default_var_LCD __initdata = {
+ /* 1600x1024, 8 bpp */
+ .xres = 1600,
+ .yres = 1024,
+ .xres_virtual = 1600,
+ .yres_virtual = 1024,
+ .xoffset = 0,
+ .yoffset = 0,
+ .bits_per_pixel = 8,
+ .grayscale = 0,
+ .red = { 0, 8, 0 },
+ .green = { 0, 8, 0 },
+ .blue = { 0, 8, 0 },
+ .transp = { 0, 0, 0 },
+ .nonstd = 0,
+ .activate = 0,
+ .height = -1,
+ .width = -1,
+ .accel_flags = 0,
+ .pixclock = 9353,
+ .left_margin = 20,
+ .right_margin = 30,
+ .upper_margin = 37,
+ .lower_margin = 3,
+ .hsync_len = 20,
+ .vsync_len = 3,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+/* default modedb mode */
+/* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */
+static struct fb_videomode default_mode_CRT __initdata = {
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39722,
+ .left_margin = 48,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+/* 1600x1024 SGI flatpanel 1600sw */
+static struct fb_videomode default_mode_LCD __initdata = {
+ /* 1600x1024, 8 bpp */
+ .xres = 1600,
+ .yres = 1024,
+ .pixclock = 9353,
+ .left_margin = 20,
+ .right_margin = 30,
+ .upper_margin = 37,
+ .lower_margin = 3,
+ .hsync_len = 20,
+ .vsync_len = 3,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+struct fb_videomode *default_mode = &default_mode_CRT;
+struct fb_var_screeninfo *default_var = &default_var_CRT;
+
+static int flat_panel_enabled = 0;
+
+static void gbe_reset(void)
+{
+ /* Turn on dotclock PLL */
+ gbe->ctrlstat = 0x300aa000;
+}
+
+
+/*
+ * Function: gbe_turn_off
+ * Parameters: (None)
+ * Description: This should turn off the monitor and gbe. This is used
+ * when switching between the serial console and the graphics
+ * console.
+ */
+
+void gbe_turn_off(void)
+{
+ int i;
+ unsigned int val, x, y, vpixen_off;
+
+ /* check if pixel counter is on */
+ val = gbe->vt_xy;
+ if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1)
+ return;
+
+ /* turn off DMA */
+ val = gbe->ovr_control;
+ SET_GBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, val, 0);
+ gbe->ovr_control = val;
+ udelay(1000);
+ val = gbe->frm_control;
+ SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 0);
+ gbe->frm_control = val;
+ udelay(1000);
+ val = gbe->did_control;
+ SET_GBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, val, 0);
+ gbe->did_control = val;
+ udelay(1000);
+
+ /* We have to wait through two vertical retrace periods before
+ * the pixel DMA is turned off for sure. */
+ for (i = 0; i < 10000; i++) {
+ val = gbe->frm_inhwctrl;
+ if (GET_GBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, val)) {
+ udelay(10);
+ } else {
+ val = gbe->ovr_inhwctrl;
+ if (GET_GBE_FIELD(OVR_INHWCTRL, OVR_DMA_ENABLE, val)) {
+ udelay(10);
+ } else {
+ val = gbe->did_inhwctrl;
+ if (GET_GBE_FIELD(DID_INHWCTRL, DID_DMA_ENABLE, val)) {
+ udelay(10);
+ } else
+ break;
+ }
+ }
+ }
+ if (i == 10000)
+ printk(KERN_ERR "gbefb: turn off DMA timed out\n");
+
+ /* wait for vpixen_off */
+ val = gbe->vt_vpixen;
+ vpixen_off = GET_GBE_FIELD(VT_VPIXEN, VPIXEN_OFF, val);
+
+ for (i = 0; i < 100000; i++) {
+ val = gbe->vt_xy;
+ x = GET_GBE_FIELD(VT_XY, X, val);
+ y = GET_GBE_FIELD(VT_XY, Y, val);
+ if (y < vpixen_off)
+ break;
+ udelay(1);
+ }
+ if (i == 100000)
+ printk(KERN_ERR
+ "gbefb: wait for vpixen_off timed out\n");
+ for (i = 0; i < 10000; i++) {
+ val = gbe->vt_xy;
+ x = GET_GBE_FIELD(VT_XY, X, val);
+ y = GET_GBE_FIELD(VT_XY, Y, val);
+ if (y > vpixen_off)
+ break;
+ udelay(1);
+ }
+ if (i == 10000)
+ printk(KERN_ERR "gbefb: wait for vpixen_off timed out\n");
+
+ /* turn off pixel counter */
+ val = 0;
+ SET_GBE_FIELD(VT_XY, FREEZE, val, 1);
+ gbe->vt_xy = val;
+ udelay(10000);
+ for (i = 0; i < 10000; i++) {
+ val = gbe->vt_xy;
+ if (GET_GBE_FIELD(VT_XY, FREEZE, val) != 1)
+ udelay(10);
+ else
+ break;
+ }
+ if (i == 10000)
+ printk(KERN_ERR "gbefb: turn off pixel clock timed out\n");
+
+ /* turn off dot clock */
+ val = gbe->dotclock;
+ SET_GBE_FIELD(DOTCLK, RUN, val, 0);
+ gbe->dotclock = val;
+ udelay(10000);
+ for (i = 0; i < 10000; i++) {
+ val = gbe->dotclock;
+ if (GET_GBE_FIELD(DOTCLK, RUN, val))
+ udelay(10);
+ else
+ break;
+ }
+ if (i == 10000)
+ printk(KERN_ERR "gbefb: turn off dotclock timed out\n");
+
+ /* reset the frame DMA FIFO */
+ val = gbe->frm_size_tile;
+ SET_GBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, val, 1);
+ gbe->frm_size_tile = val;
+ SET_GBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, val, 0);
+ gbe->frm_size_tile = val;
+}
+
+static void gbe_turn_on(void)
+{
+ unsigned int val, i;
+
+ /*
+ * Check if pixel counter is off, for unknown reason this
+ * code hangs Visual Workstations
+ */
+ if (gbe_revision < 2) {
+ val = gbe->vt_xy;
+ if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 0)
+ return;
+ }
+
+ /* turn on dot clock */
+ val = gbe->dotclock;
+ SET_GBE_FIELD(DOTCLK, RUN, val, 1);
+ gbe->dotclock = val;
+ udelay(10000);
+ for (i = 0; i < 10000; i++) {
+ val = gbe->dotclock;
+ if (GET_GBE_FIELD(DOTCLK, RUN, val) != 1)
+ udelay(10);
+ else
+ break;
+ }
+ if (i == 10000)
+ printk(KERN_ERR "gbefb: turn on dotclock timed out\n");
+
+ /* turn on pixel counter */
+ val = 0;
+ SET_GBE_FIELD(VT_XY, FREEZE, val, 0);
+ gbe->vt_xy = val;
+ udelay(10000);
+ for (i = 0; i < 10000; i++) {
+ val = gbe->vt_xy;
+ if (GET_GBE_FIELD(VT_XY, FREEZE, val))
+ udelay(10);
+ else
+ break;
+ }
+ if (i == 10000)
+ printk(KERN_ERR "gbefb: turn on pixel clock timed out\n");
+
+ /* turn on DMA */
+ val = gbe->frm_control;
+ SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 1);
+ gbe->frm_control = val;
+ udelay(1000);
+ for (i = 0; i < 10000; i++) {
+ val = gbe->frm_inhwctrl;
+ if (GET_GBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, val) != 1)
+ udelay(10);
+ else
+ break;
+ }
+ if (i == 10000)
+ printk(KERN_ERR "gbefb: turn on DMA timed out\n");
+}
+
+/*
+ * Blank the display.
+ */
+static int gbefb_blank(int blank, struct fb_info *info)
+{
+ /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */
+ switch (blank) {
+ case FB_BLANK_UNBLANK: /* unblank */
+ gbe_turn_on();
+ break;
+
+ case FB_BLANK_NORMAL: /* blank */
+ gbe_turn_off();
+ break;
+
+ default:
+ /* Nothing */
+ break;
+ }
+ return 0;
+}
+
+/*
+ * Setup flatpanel related registers.
+ */
+static void gbefb_setup_flatpanel(struct gbe_timing_info *timing)
+{
+ int fp_wid, fp_hgt, fp_vbs, fp_vbe;
+ u32 outputVal = 0;
+
+ SET_GBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal,
+ (timing->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1);
+ SET_GBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal,
+ (timing->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1);
+ gbe->vt_flags = outputVal;
+
+ /* Turn on the flat panel */
+ fp_wid = 1600;
+ fp_hgt = 1024;
+ fp_vbs = 0;
+ fp_vbe = 1600;
+ timing->pll_m = 4;
+ timing->pll_n = 1;
+ timing->pll_p = 0;
+
+ outputVal = 0;
+ SET_GBE_FIELD(FP_DE, ON, outputVal, fp_vbs);
+ SET_GBE_FIELD(FP_DE, OFF, outputVal, fp_vbe);
+ gbe->fp_de = outputVal;
+ outputVal = 0;
+ SET_GBE_FIELD(FP_HDRV, OFF, outputVal, fp_wid);
+ gbe->fp_hdrv = outputVal;
+ outputVal = 0;
+ SET_GBE_FIELD(FP_VDRV, ON, outputVal, 1);
+ SET_GBE_FIELD(FP_VDRV, OFF, outputVal, fp_hgt + 1);
+ gbe->fp_vdrv = outputVal;
+}
+
+struct gbe_pll_info {
+ int clock_rate;
+ int fvco_min;
+ int fvco_max;
+};
+
+static struct gbe_pll_info gbe_pll_table[2] = {
+ { 20, 80, 220 },
+ { 27, 80, 220 },
+};
+
+static int compute_gbe_timing(struct fb_var_screeninfo *var,
+ struct gbe_timing_info *timing)
+{
+ int pll_m, pll_n, pll_p, error, best_m, best_n, best_p, best_error;
+ int pixclock;
+ struct gbe_pll_info *gbe_pll;
+
+ if (gbe_revision < 2)
+ gbe_pll = &gbe_pll_table[0];
+ else
+ gbe_pll = &gbe_pll_table[1];
+
+ /* Determine valid resolution and timing
+ * GBE crystal runs at 20Mhz or 27Mhz
+ * pll_m, pll_n, pll_p define the following frequencies
+ * fvco = pll_m * 20Mhz / pll_n
+ * fout = fvco / (2**pll_p) */
+ best_error = 1000000000;
+ best_n = best_m = best_p = 0;
+ for (pll_p = 0; pll_p < 4; pll_p++)
+ for (pll_m = 1; pll_m < 256; pll_m++)
+ for (pll_n = 1; pll_n < 64; pll_n++) {
+ pixclock = (1000000 / gbe_pll->clock_rate) *
+ (pll_n << pll_p) / pll_m;
+
+ error = var->pixclock - pixclock;
+
+ if (error < 0)
+ error = -error;
+
+ if (error < best_error &&
+ pll_m / pll_n >
+ gbe_pll->fvco_min / gbe_pll->clock_rate &&
+ pll_m / pll_n <
+ gbe_pll->fvco_max / gbe_pll->clock_rate) {
+ best_error = error;
+ best_m = pll_m;
+ best_n = pll_n;
+ best_p = pll_p;
+ }
+ }
+
+ if (!best_n || !best_m)
+ return -EINVAL; /* Resolution to high */
+
+ pixclock = (1000000 / gbe_pll->clock_rate) *
+ (best_n << best_p) / best_m;
+
+ /* set video timing information */
+ if (timing) {
+ timing->width = var->xres;
+ timing->height = var->yres;
+ timing->pll_m = best_m;
+ timing->pll_n = best_n;
+ timing->pll_p = best_p;
+ timing->cfreq = gbe_pll->clock_rate * 1000 * timing->pll_m /
+ (timing->pll_n << timing->pll_p);
+ timing->htotal = var->left_margin + var->xres +
+ var->right_margin + var->hsync_len;
+ timing->vtotal = var->upper_margin + var->yres +
+ var->lower_margin + var->vsync_len;
+ timing->fields_sec = 1000 * timing->cfreq / timing->htotal *
+ 1000 / timing->vtotal;
+ timing->hblank_start = var->xres;
+ timing->vblank_start = var->yres;
+ timing->hblank_end = timing->htotal;
+ timing->hsync_start = var->xres + var->right_margin + 1;
+ timing->hsync_end = timing->hsync_start + var->hsync_len;
+ timing->vblank_end = timing->vtotal;
+ timing->vsync_start = var->yres + var->lower_margin + 1;
+ timing->vsync_end = timing->vsync_start + var->vsync_len;
+ }
+
+ return pixclock;
+}
+
+static void gbe_set_timing_info(struct gbe_timing_info *timing)
+{
+ int temp;
+ unsigned int val;
+
+ /* setup dot clock PLL */
+ val = 0;
+ SET_GBE_FIELD(DOTCLK, M, val, timing->pll_m - 1);
+ SET_GBE_FIELD(DOTCLK, N, val, timing->pll_n - 1);
+ SET_GBE_FIELD(DOTCLK, P, val, timing->pll_p);
+ SET_GBE_FIELD(DOTCLK, RUN, val, 0); /* do not start yet */
+ gbe->dotclock = val;
+ udelay(10000);
+
+ /* setup pixel counter */
+ val = 0;
+ SET_GBE_FIELD(VT_XYMAX, MAXX, val, timing->htotal);
+ SET_GBE_FIELD(VT_XYMAX, MAXY, val, timing->vtotal);
+ gbe->vt_xymax = val;
+
+ /* setup video timing signals */
+ val = 0;
+ SET_GBE_FIELD(VT_VSYNC, VSYNC_ON, val, timing->vsync_start);
+ SET_GBE_FIELD(VT_VSYNC, VSYNC_OFF, val, timing->vsync_end);
+ gbe->vt_vsync = val;
+ val = 0;
+ SET_GBE_FIELD(VT_HSYNC, HSYNC_ON, val, timing->hsync_start);
+ SET_GBE_FIELD(VT_HSYNC, HSYNC_OFF, val, timing->hsync_end);
+ gbe->vt_hsync = val;
+ val = 0;
+ SET_GBE_FIELD(VT_VBLANK, VBLANK_ON, val, timing->vblank_start);
+ SET_GBE_FIELD(VT_VBLANK, VBLANK_OFF, val, timing->vblank_end);
+ gbe->vt_vblank = val;
+ val = 0;
+ SET_GBE_FIELD(VT_HBLANK, HBLANK_ON, val,
+ timing->hblank_start - 5);
+ SET_GBE_FIELD(VT_HBLANK, HBLANK_OFF, val,
+ timing->hblank_end - 3);
+ gbe->vt_hblank = val;
+
+ /* setup internal timing signals */
+ val = 0;
+ SET_GBE_FIELD(VT_VCMAP, VCMAP_ON, val, timing->vblank_start);
+ SET_GBE_FIELD(VT_VCMAP, VCMAP_OFF, val, timing->vblank_end);
+ gbe->vt_vcmap = val;
+ val = 0;
+ SET_GBE_FIELD(VT_HCMAP, HCMAP_ON, val, timing->hblank_start);
+ SET_GBE_FIELD(VT_HCMAP, HCMAP_OFF, val, timing->hblank_end);
+ gbe->vt_hcmap = val;
+
+ val = 0;
+ temp = timing->vblank_start - timing->vblank_end - 1;
+ if (temp > 0)
+ temp = -temp;
+
+ if (flat_panel_enabled)
+ gbefb_setup_flatpanel(timing);
+
+ SET_GBE_FIELD(DID_START_XY, DID_STARTY, val, (u32) temp);
+ if (timing->hblank_end >= 20)
+ SET_GBE_FIELD(DID_START_XY, DID_STARTX, val,
+ timing->hblank_end - 20);
+ else
+ SET_GBE_FIELD(DID_START_XY, DID_STARTX, val,
+ timing->htotal - (20 - timing->hblank_end));
+ gbe->did_start_xy = val;
+
+ val = 0;
+ SET_GBE_FIELD(CRS_START_XY, CRS_STARTY, val, (u32) (temp + 1));
+ if (timing->hblank_end >= GBE_CRS_MAGIC)
+ SET_GBE_FIELD(CRS_START_XY, CRS_STARTX, val,
+ timing->hblank_end - GBE_CRS_MAGIC);
+ else
+ SET_GBE_FIELD(CRS_START_XY, CRS_STARTX, val,
+ timing->htotal - (GBE_CRS_MAGIC -
+ timing->hblank_end));
+ gbe->crs_start_xy = val;
+
+ val = 0;
+ SET_GBE_FIELD(VC_START_XY, VC_STARTY, val, (u32) temp);
+ SET_GBE_FIELD(VC_START_XY, VC_STARTX, val, timing->hblank_end - 4);
+ gbe->vc_start_xy = val;
+
+ val = 0;
+ temp = timing->hblank_end - GBE_PIXEN_MAGIC_ON;
+ if (temp < 0)
+ temp += timing->htotal; /* allow blank to wrap around */
+
+ SET_GBE_FIELD(VT_HPIXEN, HPIXEN_ON, val, temp);
+ SET_GBE_FIELD(VT_HPIXEN, HPIXEN_OFF, val,
+ ((temp + timing->width -
+ GBE_PIXEN_MAGIC_OFF) % timing->htotal));
+ gbe->vt_hpixen = val;
+
+ val = 0;
+ SET_GBE_FIELD(VT_VPIXEN, VPIXEN_ON, val, timing->vblank_end);
+ SET_GBE_FIELD(VT_VPIXEN, VPIXEN_OFF, val, timing->vblank_start);
+ gbe->vt_vpixen = val;
+
+ /* turn off sync on green */
+ val = 0;
+ SET_GBE_FIELD(VT_FLAGS, SYNC_LOW, val, 1);
+ gbe->vt_flags = val;
+}
+
+/*
+ * Set the hardware according to 'par'.
+ */
+
+static int gbefb_set_par(struct fb_info *info)
+{
+ int i;
+ unsigned int val;
+ int wholeTilesX, partTilesX, maxPixelsPerTileX;
+ int height_pix;
+ int xpmax, ypmax; /* Monitor resolution */
+ int bytesPerPixel; /* Bytes per pixel */
+ struct gbefb_par *par = (struct gbefb_par *) info->par;
+
+ compute_gbe_timing(&info->var, &par->timing);
+
+ bytesPerPixel = info->var.bits_per_pixel / 8;
+ info->fix.line_length = info->var.xres_virtual * bytesPerPixel;
+ xpmax = par->timing.width;
+ ypmax = par->timing.height;
+
+ /* turn off GBE */
+ gbe_turn_off();
+
+ /* set timing info */
+ gbe_set_timing_info(&par->timing);
+
+ /* initialize DIDs */
+ val = 0;
+ switch (bytesPerPixel) {
+ case 1:
+ SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8);
+ break;
+ case 2:
+ SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5);
+ break;
+ case 4:
+ SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8);
+ break;
+ }
+ SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH);
+
+ for (i = 0; i < 32; i++)
+ gbe->mode_regs[i] = val;
+
+ /* Initialize interrupts */
+ gbe->vt_intr01 = 0xffffffff;
+ gbe->vt_intr23 = 0xffffffff;
+
+ /* HACK:
+ The GBE hardware uses a tiled memory to screen mapping. Tiles are
+ blocks of 512x128, 256x128 or 128x128 pixels, respectively for 8bit,
+ 16bit and 32 bit modes (64 kB). They cover the screen with partial
+ tiles on the right and/or bottom of the screen if needed.
+ For exemple in 640x480 8 bit mode the mapping is:
+
+ <-------- 640 ----->
+ <---- 512 ----><128|384 offscreen>
+ ^ ^
+ | 128 [tile 0] [tile 1]
+ | v
+ ^
+ 4 128 [tile 2] [tile 3]
+ 8 v
+ 0 ^
+ 128 [tile 4] [tile 5]
+ | v
+ | ^
+ v 96 [tile 6] [tile 7]
+ 32 offscreen
+
+ Tiles have the advantage that they can be allocated individually in
+ memory. However, this mapping is not linear at all, which is not
+ really convienient. In order to support linear addressing, the GBE
+ DMA hardware is fooled into thinking the screen is only one tile
+ large and but has a greater height, so that the DMA transfer covers
+ the same region.
+ Tiles are still allocated as independent chunks of 64KB of
+ continuous physical memory and remapped so that the kernel sees the
+ framebuffer as a continuous virtual memory. The GBE tile table is
+ set up so that each tile references one of these 64k blocks:
+
+ GBE -> tile list framebuffer TLB <------------ CPU
+ [ tile 0 ] -> [ 64KB ] <- [ 16x 4KB page entries ] ^
+ ... ... ... linear virtual FB
+ [ tile n ] -> [ 64KB ] <- [ 16x 4KB page entries ] v
+
+
+ The GBE hardware is then told that the buffer is 512*tweaked_height,
+ with tweaked_height = real_width*real_height/pixels_per_tile.
+ Thus the GBE hardware will scan the first tile, filing the first 64k
+ covered region of the screen, and then will proceed to the next
+ tile, until the whole screen is covered.
+
+ Here is what would happen at 640x480 8bit:
+
+ normal tiling linear
+ ^ 11111111111111112222 11111111111111111111 ^
+ 128 11111111111111112222 11111111111111111111 102 lines
+ 11111111111111112222 11111111111111111111 v
+ V 11111111111111112222 11111111222222222222
+ 33333333333333334444 22222222222222222222
+ 33333333333333334444 22222222222222222222
+ < 512 > < 256 > 102*640+256 = 64k
+
+ NOTE: The only mode for which this is not working is 800x600 8bit,
+ as 800*600/512 = 937.5 which is not integer and thus causes
+ flickering.
+ I guess this is not so important as one can use 640x480 8bit or
+ 800x600 16bit anyway.
+ */
+
+ /* Tell gbe about the tiles table location */
+ /* tile_ptr -> [ tile 1 ] -> FB mem */
+ /* [ tile 2 ] -> FB mem */
+ /* ... */
+ val = 0;
+ SET_GBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, val, gbe_tiles.dma >> 9);
+ SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 0); /* do not start */
+ SET_GBE_FIELD(FRM_CONTROL, FRM_LINEAR, val, 0);
+ gbe->frm_control = val;
+
+ maxPixelsPerTileX = 512 / bytesPerPixel;
+ wholeTilesX = 1;
+ partTilesX = 0;
+
+ /* Initialize the framebuffer */
+ val = 0;
+ SET_GBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, val, wholeTilesX);
+ SET_GBE_FIELD(FRM_SIZE_TILE, FRM_RHS, val, partTilesX);
+
+ switch (bytesPerPixel) {
+ case 1:
+ SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val,
+ GBE_FRM_DEPTH_8);
+ break;
+ case 2:
+ SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val,
+ GBE_FRM_DEPTH_16);
+ break;
+ case 4:
+ SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val,
+ GBE_FRM_DEPTH_32);
+ break;
+ }
+ gbe->frm_size_tile = val;
+
+ /* compute tweaked height */
+ height_pix = xpmax * ypmax / maxPixelsPerTileX;
+
+ val = 0;
+ SET_GBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, val, height_pix);
+ gbe->frm_size_pixel = val;
+
+ /* turn off DID and overlay DMA */
+ gbe->did_control = 0;
+ gbe->ovr_width_tile = 0;
+
+ /* Turn off mouse cursor */
+ gbe->crs_ctl = 0;
+
+ /* Turn on GBE */
+ gbe_turn_on();
+
+ /* Initialize the gamma map */
+ udelay(10);
+ for (i = 0; i < 256; i++)
+ gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8);
+
+ /* Initialize the color map */
+ for (i = 0; i < 256; i++) {
+ int j;
+
+ for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
+ udelay(10);
+ if (j == 1000)
+ printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+
+ gbe->cmap[i] = (i << 8) | (i << 16) | (i << 24);
+ }
+
+ return 0;
+}
+
+static void gbefb_encode_fix(struct fb_fix_screeninfo *fix,
+ struct fb_var_screeninfo *var)
+{
+ memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+ strcpy(fix->id, "SGI GBE");
+ fix->smem_start = (unsigned long) gbe_mem;
+ fix->smem_len = gbe_mem_size;
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->type_aux = 0;
+ fix->accel = FB_ACCEL_NONE;
+ switch (var->bits_per_pixel) {
+ case 8:
+ fix->visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+ default:
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ break;
+ }
+ fix->ywrapstep = 0;
+ fix->xpanstep = 0;
+ fix->ypanstep = 0;
+ fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+ fix->mmio_start = GBE_BASE;
+ fix->mmio_len = sizeof(struct sgi_gbe);
+}
+
+/*
+ * Set a single color register. The values supplied are already
+ * rounded down to the hardware's capabilities (according to the
+ * entries in the var structure). Return != 0 for invalid regno.
+ */
+
+static int gbefb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ struct fb_info *info)
+{
+ int i;
+
+ if (regno > 255)
+ return 1;
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ /* wait for the color map FIFO to have a free entry */
+ for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
+ udelay(10);
+ if (i == 1000) {
+ printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+ return 1;
+ }
+ gbe->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
+ break;
+ case 15:
+ case 16:
+ red >>= 3;
+ green >>= 3;
+ blue >>= 3;
+ pseudo_palette[regno] =
+ (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset);
+ break;
+ case 32:
+ pseudo_palette[regno] =
+ (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset);
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * Check video mode validity, eventually modify var to best match.
+ */
+static int gbefb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ unsigned int line_length;
+ struct gbe_timing_info timing;
+
+ /* Limit bpp to 8, 16, and 32 */
+ if (var->bits_per_pixel <= 8)
+ var->bits_per_pixel = 8;
+ else if (var->bits_per_pixel <= 16)
+ var->bits_per_pixel = 16;
+ else if (var->bits_per_pixel <= 32)
+ var->bits_per_pixel = 32;
+ else
+ return -EINVAL;
+
+ /* Check the mode can be mapped linearly with the tile table trick. */
+ /* This requires width x height x bytes/pixel be a multiple of 512 */
+ if ((var->xres * var->yres * var->bits_per_pixel) & 4095)
+ return -EINVAL;
+
+ var->grayscale = 0; /* No grayscale for now */
+
+ if ((var->pixclock = compute_gbe_timing(var, &timing)) < 0)
+ return(-EINVAL);
+
+ /* Adjust virtual resolution, if necessary */
+ if (var->xres > var->xres_virtual || (!ywrap && !ypan))
+ var->xres_virtual = var->xres;
+ if (var->yres > var->yres_virtual || (!ywrap && !ypan))
+ var->yres_virtual = var->yres;
+
+ if (var->vmode & FB_VMODE_CONUPDATE) {
+ var->vmode |= FB_VMODE_YWRAP;
+ var->xoffset = info->var.xoffset;
+ var->yoffset = info->var.yoffset;
+ }
+
+ /* No grayscale for now */
+ var->grayscale = 0;
+
+ /* Memory limit */
+ line_length = var->xres_virtual * var->bits_per_pixel / 8;
+ if (line_length * var->yres_virtual > gbe_mem_size)
+ return -ENOMEM; /* Virtual resolution too high */
+
+ switch (var->bits_per_pixel) {
+ case 8:
+ var->red.offset = 0;
+ var->red.length = 8;
+ var->green.offset = 0;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 16: /* RGB 1555 */
+ var->red.offset = 10;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 5;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 32: /* RGB 8888 */
+ var->red.offset = 24;
+ var->red.length = 8;
+ var->green.offset = 16;
+ var->green.length = 8;
+ var->blue.offset = 8;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 8;
+ break;
+ }
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ var->transp.msb_right = 0;
+
+ var->left_margin = timing.htotal - timing.hsync_end;
+ var->right_margin = timing.hsync_start - timing.width;
+ var->upper_margin = timing.vtotal - timing.vsync_end;
+ var->lower_margin = timing.vsync_start - timing.height;
+ var->hsync_len = timing.hsync_end - timing.hsync_start;
+ var->vsync_len = timing.vsync_end - timing.vsync_start;
+
+ return 0;
+}
+
+static int gbefb_mmap(struct fb_info *info, struct file *file,
+ struct vm_area_struct *vma)
+{
+ unsigned long size = vma->vm_end - vma->vm_start;
+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ unsigned long addr;
+ unsigned long phys_addr, phys_size;
+ u16 *tile;
+
+ /* check range */
+ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+ return -EINVAL;
+ if (offset + size > gbe_mem_size)
+ return -EINVAL;
+
+ /* remap using the fastest write-through mode on architecture */
+ /* try not polluting the cache when possible */
+ pgprot_val(vma->vm_page_prot) =
+ pgprot_fb(pgprot_val(vma->vm_page_prot));
+
+ vma->vm_flags |= VM_IO | VM_RESERVED;
+ vma->vm_file = file;
+
+ /* look for the starting tile */
+ tile = &gbe_tiles.cpu[offset >> TILE_SHIFT];
+ addr = vma->vm_start;
+ offset &= TILE_MASK;
+
+ /* remap each tile separately */
+ do {
+ phys_addr = (((unsigned long) (*tile)) << TILE_SHIFT) + offset;
+ if ((offset + size) < TILE_SIZE)
+ phys_size = size;
+ else
+ phys_size = TILE_SIZE - offset;
+
+ if (remap_pfn_range(vma, addr, phys_addr >> PAGE_SHIFT,
+ phys_size, vma->vm_page_prot))
+ return -EAGAIN;
+
+ offset = 0;
+ size -= phys_size;
+ addr += phys_size;
+ tile++;
+ } while (size);
+
+ return 0;
+}
+
+static struct fb_ops gbefb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = gbefb_check_var,
+ .fb_set_par = gbefb_set_par,
+ .fb_setcolreg = gbefb_setcolreg,
+ .fb_mmap = gbefb_mmap,
+ .fb_blank = gbefb_blank,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_cursor = soft_cursor,
+};
+
+/*
+ * sysfs
+ */
+
+static ssize_t gbefb_show_memsize(struct device *dev, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", gbe_mem_size);
+}
+
+static DEVICE_ATTR(size, S_IRUGO, gbefb_show_memsize, NULL);
+
+static ssize_t gbefb_show_rev(struct device *device, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", gbe_revision);
+}
+
+static DEVICE_ATTR(revision, S_IRUGO, gbefb_show_rev, NULL);
+
+static void __devexit gbefb_remove_sysfs(struct device *dev)
+{
+ device_remove_file(dev, &dev_attr_size);
+ device_remove_file(dev, &dev_attr_revision);
+}
+
+static void gbefb_create_sysfs(struct device *dev)
+{
+ device_create_file(dev, &dev_attr_size);
+ device_create_file(dev, &dev_attr_revision);
+}
+
+/*
+ * Initialization
+ */
+
+int __init gbefb_setup(char *options)
+{
+ char *this_opt;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!strncmp(this_opt, "monitor:", 8)) {
+ if (!strncmp(this_opt + 8, "crt", 3)) {
+ flat_panel_enabled = 0;
+ default_var = &default_var_CRT;
+ default_mode = &default_mode_CRT;
+ } else if (!strncmp(this_opt + 8, "1600sw", 6) ||
+ !strncmp(this_opt + 8, "lcd", 3)) {
+ flat_panel_enabled = 1;
+ default_var = &default_var_LCD;
+ default_mode = &default_mode_LCD;
+ }
+ } else if (!strncmp(this_opt, "mem:", 4)) {
+ gbe_mem_size = memparse(this_opt + 4, &this_opt);
+ if (gbe_mem_size > CONFIG_FB_GBE_MEM * 1024 * 1024)
+ gbe_mem_size = CONFIG_FB_GBE_MEM * 1024 * 1024;
+ if (gbe_mem_size < TILE_SIZE)
+ gbe_mem_size = TILE_SIZE;
+ } else
+ mode_option = this_opt;
+ }
+ return 0;
+}
+
+static int __init gbefb_probe(struct device *dev)
+{
+ int i, ret = 0;
+ struct fb_info *info;
+ struct gbefb_par *par;
+ struct platform_device *p_dev = to_platform_device(dev);
+#ifndef MODULE
+ char *options = NULL;
+#endif
+
+ info = framebuffer_alloc(sizeof(struct gbefb_par), &p_dev->dev);
+ if (!info)
+ return -ENOMEM;
+
+#ifndef MODULE
+ if (fb_get_options("gbefb", &options))
+ return -ENODEV;
+ gbefb_setup(options);
+#endif
+
+ if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
+ printk(KERN_ERR "gbefb: couldn't reserve mmio region\n");
+ ret = -EBUSY;
+ goto out_release_framebuffer;
+ }
+
+ gbe = (struct sgi_gbe *) ioremap(GBE_BASE, sizeof(struct sgi_gbe));
+ if (!gbe) {
+ printk(KERN_ERR "gbefb: couldn't map mmio region\n");
+ ret = -ENXIO;
+ goto out_release_mem_region;
+ }
+ gbe_revision = gbe->ctrlstat & 15;
+
+ gbe_tiles.cpu =
+ dma_alloc_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t),
+ &gbe_tiles.dma, GFP_KERNEL);
+ if (!gbe_tiles.cpu) {
+ printk(KERN_ERR "gbefb: couldn't allocate tiles table\n");
+ ret = -ENOMEM;
+ goto out_unmap;
+ }
+
+ if (gbe_mem_phys) {
+ /* memory was allocated at boot time */
+ gbe_mem = ioremap_nocache(gbe_mem_phys, gbe_mem_size);
+ gbe_dma_addr = 0;
+ } else {
+ /* try to allocate memory with the classical allocator
+ * this has high chance to fail on low memory machines */
+ gbe_mem = dma_alloc_coherent(NULL, gbe_mem_size, &gbe_dma_addr,
+ GFP_KERNEL);
+ gbe_mem_phys = (unsigned long) gbe_dma_addr;
+ }
+
+#ifdef CONFIG_X86
+ mtrr_add(gbe_mem_phys, gbe_mem_size, MTRR_TYPE_WRCOMB, 1);
+#endif
+
+ if (!gbe_mem) {
+ printk(KERN_ERR "gbefb: couldn't map framebuffer\n");
+ ret = -ENXIO;
+ goto out_tiles_free;
+ }
+
+ /* map framebuffer memory into tiles table */
+ for (i = 0; i < (gbe_mem_size >> TILE_SHIFT); i++)
+ gbe_tiles.cpu[i] = (gbe_mem_phys >> TILE_SHIFT) + i;
+
+ info->fbops = &gbefb_ops;
+ info->pseudo_palette = pseudo_palette;
+ info->flags = FBINFO_DEFAULT;
+ info->screen_base = gbe_mem;
+ fb_alloc_cmap(&info->cmap, 256, 0);
+
+ /* reset GBE */
+ gbe_reset();
+
+ par = info->par;
+ /* turn on default video mode */
+ if (fb_find_mode(&par->var, info, mode_option, NULL, 0,
+ default_mode, 8) == 0)
+ par->var = *default_var;
+ info->var = par->var;
+ gbefb_check_var(&par->var, info);
+ gbefb_encode_fix(&info->fix, &info->var);
+
+ if (register_framebuffer(info) < 0) {
+ printk(KERN_ERR "gbefb: couldn't register framebuffer\n");
+ ret = -ENXIO;
+ goto out_gbe_unmap;
+ }
+
+ dev_set_drvdata(&p_dev->dev, info);
+ gbefb_create_sysfs(dev);
+
+ printk(KERN_INFO "fb%d: %s rev %d @ 0x%08x using %dkB memory\n",
+ info->node, info->fix.id, gbe_revision, (unsigned) GBE_BASE,
+ gbe_mem_size >> 10);
+
+ return 0;
+
+out_gbe_unmap:
+ if (gbe_dma_addr)
+ dma_free_coherent(NULL, gbe_mem_size, gbe_mem, gbe_mem_phys);
+ else
+ iounmap(gbe_mem);
+out_tiles_free:
+ dma_free_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t),
+ (void *)gbe_tiles.cpu, gbe_tiles.dma);
+out_unmap:
+ iounmap(gbe);
+out_release_mem_region:
+ release_mem_region(GBE_BASE, sizeof(struct sgi_gbe));
+out_release_framebuffer:
+ framebuffer_release(info);
+
+ return ret;
+}
+
+static int __devexit gbefb_remove(struct device* dev)
+{
+ struct platform_device *p_dev = to_platform_device(dev);
+ struct fb_info *info = dev_get_drvdata(&p_dev->dev);
+
+ unregister_framebuffer(info);
+ gbe_turn_off();
+ if (gbe_dma_addr)
+ dma_free_coherent(NULL, gbe_mem_size, gbe_mem, gbe_mem_phys);
+ else
+ iounmap(gbe_mem);
+ dma_free_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t),
+ (void *)gbe_tiles.cpu, gbe_tiles.dma);
+ release_mem_region(GBE_BASE, sizeof(struct sgi_gbe));
+ iounmap(gbe);
+ gbefb_remove_sysfs(dev);
+ framebuffer_release(info);
+
+ return 0;
+}
+
+static struct device_driver gbefb_driver = {
+ .name = "gbefb",
+ .bus = &platform_bus_type,
+ .probe = gbefb_probe,
+ .remove = __devexit_p(gbefb_remove),
+};
+
+static struct platform_device gbefb_device = {
+ .name = "gbefb",
+};
+
+int __init gbefb_init(void)
+{
+ int ret = driver_register(&gbefb_driver);
+ if (!ret) {
+ ret = platform_device_register(&gbefb_device);
+ if (ret)
+ driver_unregister(&gbefb_driver);
+ }
+ return ret;
+}
+
+void __exit gbefb_exit(void)
+{
+ driver_unregister(&gbefb_driver);
+}
+
+module_init(gbefb_init);
+module_exit(gbefb_exit);
+
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud