summaryrefslogtreecommitdiffstats
path: root/drivers/video/cyber2000fb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/cyber2000fb.c')
-rw-r--r--drivers/video/cyber2000fb.c1761
1 files changed, 1761 insertions, 0 deletions
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
new file mode 100644
index 0000000..8b1b7c6
--- /dev/null
+++ b/drivers/video/cyber2000fb.c
@@ -0,0 +1,1761 @@
+/*
+ * linux/drivers/video/cyber2000fb.c
+ *
+ * Copyright (C) 1998-2002 Russell King
+ *
+ * MIPS and 50xx clock support
+ * Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com>
+ *
+ * 32 bit support, text color and panning fixes for modes != 8 bit
+ * Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device
+ *
+ * Based on cyberfb.c.
+ *
+ * Note that we now use the new fbcon fix, var and cmap scheme. We do
+ * still have to check which console is the currently displayed one
+ * however, especially for the colourmap stuff.
+ *
+ * We also use the new hotplug PCI subsystem. I'm not sure if there
+ * are any such cards, but I'm erring on the side of caution. We don't
+ * want to go pop just because someone does have one.
+ *
+ * Note that this doesn't work fully in the case of multiple CyberPro
+ * cards with grabbers. We currently can only attach to the first
+ * CyberPro card found.
+ *
+ * When we're in truecolour mode, we power down the LUT RAM as a power
+ * saving feature. Also, when we enter any of the powersaving modes
+ * (except soft blanking) we power down the RAMDACs. This saves about
+ * 1W, which is roughly 8% of the power consumption of a NetWinder
+ * (which, incidentally, is about the same saving as a 2.5in hard disk
+ * entering standby mode.)
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#ifdef __arm__
+#include <asm/mach-types.h>
+#endif
+
+#include "cyber2000fb.h"
+
+struct cfb_info {
+ struct fb_info fb;
+ struct display_switch *dispsw;
+ struct display *display;
+ struct pci_dev *dev;
+ unsigned char __iomem *region;
+ unsigned char __iomem *regs;
+ u_int id;
+ int func_use_count;
+ u_long ref_ps;
+
+ /*
+ * Clock divisors
+ */
+ u_int divisors[4];
+
+ struct {
+ u8 red, green, blue;
+ } palette[NR_PALETTE];
+
+ u_char mem_ctl1;
+ u_char mem_ctl2;
+ u_char mclk_mult;
+ u_char mclk_div;
+ /*
+ * RAMDAC control register is both of these or'ed together
+ */
+ u_char ramdac_ctrl;
+ u_char ramdac_powerdown;
+};
+
+static char *default_font = "Acorn8x8";
+module_param(default_font, charp, 0);
+MODULE_PARM_DESC(default_font, "Default font name");
+
+/*
+ * Our access methods.
+ */
+#define cyber2000fb_writel(val,reg,cfb) writel(val, (cfb)->regs + (reg))
+#define cyber2000fb_writew(val,reg,cfb) writew(val, (cfb)->regs + (reg))
+#define cyber2000fb_writeb(val,reg,cfb) writeb(val, (cfb)->regs + (reg))
+
+#define cyber2000fb_readb(reg,cfb) readb((cfb)->regs + (reg))
+
+static inline void
+cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
+{
+ cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb);
+}
+
+static inline void
+cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
+{
+ cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb);
+}
+
+static inline unsigned int
+cyber2000_grphr(unsigned int reg, struct cfb_info *cfb)
+{
+ cyber2000fb_writeb(reg, 0x3ce, cfb);
+ return cyber2000fb_readb(0x3cf, cfb);
+}
+
+static inline void
+cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
+{
+ cyber2000fb_readb(0x3da, cfb);
+ cyber2000fb_writeb(reg, 0x3c0, cfb);
+ cyber2000fb_readb(0x3c1, cfb);
+ cyber2000fb_writeb(val, 0x3c0, cfb);
+}
+
+static inline void
+cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
+{
+ cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb);
+}
+
+/* -------------------- Hardware specific routines ------------------------- */
+
+/*
+ * Hardware Cyber2000 Acceleration
+ */
+static void
+cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+ struct cfb_info *cfb = (struct cfb_info *)info;
+ unsigned long dst, col;
+
+ if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
+ cfb_fillrect(info, rect);
+ return;
+ }
+
+ cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
+ cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb);
+ cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb);
+
+ col = rect->color;
+ if (cfb->fb.var.bits_per_pixel > 8)
+ col = ((u32 *)cfb->fb.pseudo_palette)[col];
+ cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb);
+
+ dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual;
+ if (cfb->fb.var.bits_per_pixel == 24) {
+ cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
+ dst *= 3;
+ }
+
+ cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
+ cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
+ cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb);
+ cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb);
+}
+
+static void
+cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
+{
+ struct cfb_info *cfb = (struct cfb_info *)info;
+ unsigned int cmd = CO_CMD_L_PATTERN_FGCOL;
+ unsigned long src, dst;
+
+ if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
+ cfb_copyarea(info, region);
+ return;
+ }
+
+ cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
+ cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb);
+ cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb);
+
+ src = region->sx + region->sy * cfb->fb.var.xres_virtual;
+ dst = region->dx + region->dy * cfb->fb.var.xres_virtual;
+
+ if (region->sx < region->dx) {
+ src += region->width - 1;
+ dst += region->width - 1;
+ cmd |= CO_CMD_L_INC_LEFT;
+ }
+
+ if (region->sy < region->dy) {
+ src += (region->height - 1) * cfb->fb.var.xres_virtual;
+ dst += (region->height - 1) * cfb->fb.var.xres_virtual;
+ cmd |= CO_CMD_L_INC_UP;
+ }
+
+ if (cfb->fb.var.bits_per_pixel == 24) {
+ cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
+ src *= 3;
+ dst *= 3;
+ }
+ cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb);
+ cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
+ cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
+ cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb);
+ cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER,
+ CO_REG_CMD_H, cfb);
+}
+
+static void
+cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+// struct cfb_info *cfb = (struct cfb_info *)info;
+
+// if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
+ cfb_imageblit(info, image);
+ return;
+// }
+}
+
+static int cyber2000fb_sync(struct fb_info *info)
+{
+ struct cfb_info *cfb = (struct cfb_info *)info;
+ int count = 100000;
+
+ if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT))
+ return 0;
+
+ while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) {
+ if (!count--) {
+ debug_printf("accel_wait timed out\n");
+ cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
+ break;
+ }
+ udelay(1);
+ }
+ return 0;
+}
+
+/*
+ * ===========================================================================
+ */
+
+static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf)
+{
+ u_int mask = (1 << bf->length) - 1;
+
+ return (val >> (16 - bf->length) & mask) << bf->offset;
+}
+
+/*
+ * Set a single color register. Return != 0 for invalid regno.
+ */
+static int
+cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *info)
+{
+ struct cfb_info *cfb = (struct cfb_info *)info;
+ struct fb_var_screeninfo *var = &cfb->fb.var;
+ u32 pseudo_val;
+ int ret = 1;
+
+ switch (cfb->fb.fix.visual) {
+ default:
+ return 1;
+
+ /*
+ * Pseudocolour:
+ * 8 8
+ * pixel --/--+--/--> red lut --> red dac
+ * | 8
+ * +--/--> green lut --> green dac
+ * | 8
+ * +--/--> blue lut --> blue dac
+ */
+ case FB_VISUAL_PSEUDOCOLOR:
+ if (regno >= NR_PALETTE)
+ return 1;
+
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ cfb->palette[regno].red = red;
+ cfb->palette[regno].green = green;
+ cfb->palette[regno].blue = blue;
+
+ cyber2000fb_writeb(regno, 0x3c8, cfb);
+ cyber2000fb_writeb(red, 0x3c9, cfb);
+ cyber2000fb_writeb(green, 0x3c9, cfb);
+ cyber2000fb_writeb(blue, 0x3c9, cfb);
+ return 0;
+
+ /*
+ * Direct colour:
+ * n rl
+ * pixel --/--+--/--> red lut --> red dac
+ * | gl
+ * +--/--> green lut --> green dac
+ * | bl
+ * +--/--> blue lut --> blue dac
+ * n = bpp, rl = red length, gl = green length, bl = blue length
+ */
+ case FB_VISUAL_DIRECTCOLOR:
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ if (var->green.length == 6 && regno < 64) {
+ cfb->palette[regno << 2].green = green;
+
+ /*
+ * The 6 bits of the green component are applied
+ * to the high 6 bits of the LUT.
+ */
+ cyber2000fb_writeb(regno << 2, 0x3c8, cfb);
+ cyber2000fb_writeb(cfb->palette[regno >> 1].red, 0x3c9, cfb);
+ cyber2000fb_writeb(green, 0x3c9, cfb);
+ cyber2000fb_writeb(cfb->palette[regno >> 1].blue, 0x3c9, cfb);
+
+ green = cfb->palette[regno << 3].green;
+
+ ret = 0;
+ }
+
+ if (var->green.length >= 5 && regno < 32) {
+ cfb->palette[regno << 3].red = red;
+ cfb->palette[regno << 3].green = green;
+ cfb->palette[regno << 3].blue = blue;
+
+ /*
+ * The 5 bits of each colour component are
+ * applied to the high 5 bits of the LUT.
+ */
+ cyber2000fb_writeb(regno << 3, 0x3c8, cfb);
+ cyber2000fb_writeb(red, 0x3c9, cfb);
+ cyber2000fb_writeb(green, 0x3c9, cfb);
+ cyber2000fb_writeb(blue, 0x3c9, cfb);
+ ret = 0;
+ }
+
+ if (var->green.length == 4 && regno < 16) {
+ cfb->palette[regno << 4].red = red;
+ cfb->palette[regno << 4].green = green;
+ cfb->palette[regno << 4].blue = blue;
+
+ /*
+ * The 5 bits of each colour component are
+ * applied to the high 5 bits of the LUT.
+ */
+ cyber2000fb_writeb(regno << 4, 0x3c8, cfb);
+ cyber2000fb_writeb(red, 0x3c9, cfb);
+ cyber2000fb_writeb(green, 0x3c9, cfb);
+ cyber2000fb_writeb(blue, 0x3c9, cfb);
+ ret = 0;
+ }
+
+ /*
+ * Since this is only used for the first 16 colours, we
+ * don't have to care about overflowing for regno >= 32
+ */
+ pseudo_val = regno << var->red.offset |
+ regno << var->green.offset |
+ regno << var->blue.offset;
+ break;
+
+ /*
+ * True colour:
+ * n rl
+ * pixel --/--+--/--> red dac
+ * | gl
+ * +--/--> green dac
+ * | bl
+ * +--/--> blue dac
+ * n = bpp, rl = red length, gl = green length, bl = blue length
+ */
+ case FB_VISUAL_TRUECOLOR:
+ pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp);
+ pseudo_val |= convert_bitfield(red, &var->red);
+ pseudo_val |= convert_bitfield(green, &var->green);
+ pseudo_val |= convert_bitfield(blue, &var->blue);
+ break;
+ }
+
+ /*
+ * Now set our pseudo palette for the CFB16/24/32 drivers.
+ */
+ if (regno < 16)
+ ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val;
+
+ return ret;
+}
+
+struct par_info {
+ /*
+ * Hardware
+ */
+ u_char clock_mult;
+ u_char clock_div;
+ u_char extseqmisc;
+ u_char co_pixfmt;
+ u_char crtc_ofl;
+ u_char crtc[19];
+ u_int width;
+ u_int pitch;
+ u_int fetch;
+
+ /*
+ * Other
+ */
+ u_char ramdac;
+};
+
+static const u_char crtc_idx[] = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18
+};
+
+static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
+{
+ unsigned int i;
+ unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown;
+
+ cyber2000fb_writeb(0x56, 0x3ce, cfb);
+ i = cyber2000fb_readb(0x3cf, cfb);
+ cyber2000fb_writeb(i | 4, 0x3cf, cfb);
+ cyber2000fb_writeb(val, 0x3c6, cfb);
+ cyber2000fb_writeb(i, 0x3cf, cfb);
+}
+
+static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
+{
+ u_int i;
+
+ /*
+ * Blank palette
+ */
+ for (i = 0; i < NR_PALETTE; i++) {
+ cyber2000fb_writeb(i, 0x3c8, cfb);
+ cyber2000fb_writeb(0, 0x3c9, cfb);
+ cyber2000fb_writeb(0, 0x3c9, cfb);
+ cyber2000fb_writeb(0, 0x3c9, cfb);
+ }
+
+ cyber2000fb_writeb(0xef, 0x3c2, cfb);
+ cyber2000_crtcw(0x11, 0x0b, cfb);
+ cyber2000_attrw(0x11, 0x00, cfb);
+
+ cyber2000_seqw(0x00, 0x01, cfb);
+ cyber2000_seqw(0x01, 0x01, cfb);
+ cyber2000_seqw(0x02, 0x0f, cfb);
+ cyber2000_seqw(0x03, 0x00, cfb);
+ cyber2000_seqw(0x04, 0x0e, cfb);
+ cyber2000_seqw(0x00, 0x03, cfb);
+
+ for (i = 0; i < sizeof(crtc_idx); i++)
+ cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb);
+
+ for (i = 0x0a; i < 0x10; i++)
+ cyber2000_crtcw(i, 0, cfb);
+
+ cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb);
+ cyber2000_grphw(0x00, 0x00, cfb);
+ cyber2000_grphw(0x01, 0x00, cfb);
+ cyber2000_grphw(0x02, 0x00, cfb);
+ cyber2000_grphw(0x03, 0x00, cfb);
+ cyber2000_grphw(0x04, 0x00, cfb);
+ cyber2000_grphw(0x05, 0x60, cfb);
+ cyber2000_grphw(0x06, 0x05, cfb);
+ cyber2000_grphw(0x07, 0x0f, cfb);
+ cyber2000_grphw(0x08, 0xff, cfb);
+
+ /* Attribute controller registers */
+ for (i = 0; i < 16; i++)
+ cyber2000_attrw(i, i, cfb);
+
+ cyber2000_attrw(0x10, 0x01, cfb);
+ cyber2000_attrw(0x11, 0x00, cfb);
+ cyber2000_attrw(0x12, 0x0f, cfb);
+ cyber2000_attrw(0x13, 0x00, cfb);
+ cyber2000_attrw(0x14, 0x00, cfb);
+
+ /* PLL registers */
+ cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
+ cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
+ cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
+ cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb);
+ cyber2000_grphw(0x90, 0x01, cfb);
+ cyber2000_grphw(0xb9, 0x80, cfb);
+ cyber2000_grphw(0xb9, 0x00, cfb);
+
+ cfb->ramdac_ctrl = hw->ramdac;
+ cyber2000fb_write_ramdac_ctrl(cfb);
+
+ cyber2000fb_writeb(0x20, 0x3c0, cfb);
+ cyber2000fb_writeb(0xff, 0x3c6, cfb);
+
+ cyber2000_grphw(0x14, hw->fetch, cfb);
+ cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) |
+ ((hw->pitch >> 4) & 0x30), cfb);
+ cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb);
+
+ /*
+ * Set up accelerator registers
+ */
+ cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb);
+ cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb);
+ cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb);
+}
+
+static inline int
+cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var)
+{
+ u_int base = var->yoffset * var->xres_virtual + var->xoffset;
+
+ base *= var->bits_per_pixel;
+
+ /*
+ * Convert to bytes and shift two extra bits because DAC
+ * can only start on 4 byte aligned data.
+ */
+ base >>= 5;
+
+ if (base >= 1 << 20)
+ return -EINVAL;
+
+ cyber2000_grphw(0x10, base >> 16 | 0x10, cfb);
+ cyber2000_crtcw(0x0c, base >> 8, cfb);
+ cyber2000_crtcw(0x0d, base, cfb);
+
+ return 0;
+}
+
+static int
+cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb,
+ struct fb_var_screeninfo *var)
+{
+ u_int Htotal, Hblankend, Hsyncend;
+ u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend;
+#define BIT(v,b1,m,b2) (((v >> b1) & m) << b2)
+
+ hw->crtc[13] = hw->pitch;
+ hw->crtc[17] = 0xe3;
+ hw->crtc[14] = 0;
+ hw->crtc[8] = 0;
+
+ Htotal = var->xres + var->right_margin +
+ var->hsync_len + var->left_margin;
+
+ if (Htotal > 2080)
+ return -EINVAL;
+
+ hw->crtc[0] = (Htotal >> 3) - 5;
+ hw->crtc[1] = (var->xres >> 3) - 1;
+ hw->crtc[2] = var->xres >> 3;
+ hw->crtc[4] = (var->xres + var->right_margin) >> 3;
+
+ Hblankend = (Htotal - 4*8) >> 3;
+
+ hw->crtc[3] = BIT(Hblankend, 0, 0x1f, 0) |
+ BIT(1, 0, 0x01, 7);
+
+ Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3;
+
+ hw->crtc[5] = BIT(Hsyncend, 0, 0x1f, 0) |
+ BIT(Hblankend, 5, 0x01, 7);
+
+ Vdispend = var->yres - 1;
+ Vsyncstart = var->yres + var->lower_margin;
+ Vsyncend = var->yres + var->lower_margin + var->vsync_len;
+ Vtotal = var->yres + var->lower_margin + var->vsync_len +
+ var->upper_margin - 2;
+
+ if (Vtotal > 2047)
+ return -EINVAL;
+
+ Vblankstart = var->yres + 6;
+ Vblankend = Vtotal - 10;
+
+ hw->crtc[6] = Vtotal;
+ hw->crtc[7] = BIT(Vtotal, 8, 0x01, 0) |
+ BIT(Vdispend, 8, 0x01, 1) |
+ BIT(Vsyncstart, 8, 0x01, 2) |
+ BIT(Vblankstart,8, 0x01, 3) |
+ BIT(1, 0, 0x01, 4) |
+ BIT(Vtotal, 9, 0x01, 5) |
+ BIT(Vdispend, 9, 0x01, 6) |
+ BIT(Vsyncstart, 9, 0x01, 7);
+ hw->crtc[9] = BIT(0, 0, 0x1f, 0) |
+ BIT(Vblankstart,9, 0x01, 5) |
+ BIT(1, 0, 0x01, 6);
+ hw->crtc[10] = Vsyncstart;
+ hw->crtc[11] = BIT(Vsyncend, 0, 0x0f, 0) |
+ BIT(1, 0, 0x01, 7);
+ hw->crtc[12] = Vdispend;
+ hw->crtc[15] = Vblankstart;
+ hw->crtc[16] = Vblankend;
+ hw->crtc[18] = 0xff;
+
+ /*
+ * overflow - graphics reg 0x11
+ * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10
+ * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT
+ */
+ hw->crtc_ofl =
+ BIT(Vtotal, 10, 0x01, 0) |
+ BIT(Vdispend, 10, 0x01, 1) |
+ BIT(Vsyncstart, 10, 0x01, 2) |
+ BIT(Vblankstart,10, 0x01, 3) |
+ EXT_CRT_VRTOFL_LINECOMP10;
+
+ /* woody: set the interlaced bit... */
+ /* FIXME: what about doublescan? */
+ if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
+ hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE;
+
+ return 0;
+}
+
+/*
+ * The following was discovered by a good monitor, bit twiddling, theorising
+ * and but mostly luck. Strangely, it looks like everyone elses' PLL!
+ *
+ * Clock registers:
+ * fclock = fpll / div2
+ * fpll = fref * mult / div1
+ * where:
+ * fref = 14.318MHz (69842ps)
+ * mult = reg0xb0.7:0
+ * div1 = (reg0xb1.5:0 + 1)
+ * div2 = 2^(reg0xb1.7:6)
+ * fpll should be between 115 and 260 MHz
+ * (8696ps and 3846ps)
+ */
+static int
+cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb,
+ struct fb_var_screeninfo *var)
+{
+ u_long pll_ps = var->pixclock;
+ const u_long ref_ps = cfb->ref_ps;
+ u_int div2, t_div1, best_div1, best_mult;
+ int best_diff;
+ int vco;
+
+ /*
+ * Step 1:
+ * find div2 such that 115MHz < fpll < 260MHz
+ * and 0 <= div2 < 4
+ */
+ for (div2 = 0; div2 < 4; div2++) {
+ u_long new_pll;
+
+ new_pll = pll_ps / cfb->divisors[div2];
+ if (8696 > new_pll && new_pll > 3846) {
+ pll_ps = new_pll;
+ break;
+ }
+ }
+
+ if (div2 == 4)
+ return -EINVAL;
+
+ /*
+ * Step 2:
+ * Given pll_ps and ref_ps, find:
+ * pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005
+ * where { 1 < best_div1 < 32, 1 < best_mult < 256 }
+ * pll_ps_calc = best_div1 / (ref_ps * best_mult)
+ */
+ best_diff = 0x7fffffff;
+ best_mult = 32;
+ best_div1 = 255;
+ for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) {
+ u_int rr, t_mult, t_pll_ps;
+ int diff;
+
+ /*
+ * Find the multiplier for this divisor
+ */
+ rr = ref_ps * t_div1;
+ t_mult = (rr + pll_ps / 2) / pll_ps;
+
+ /*
+ * Is the multiplier within the correct range?
+ */
+ if (t_mult > 256 || t_mult < 2)
+ continue;
+
+ /*
+ * Calculate the actual clock period from this multiplier
+ * and divisor, and estimate the error.
+ */
+ t_pll_ps = (rr + t_mult / 2) / t_mult;
+ diff = pll_ps - t_pll_ps;
+ if (diff < 0)
+ diff = -diff;
+
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_mult = t_mult;
+ best_div1 = t_div1;
+ }
+
+ /*
+ * If we hit an exact value, there is no point in continuing.
+ */
+ if (diff == 0)
+ break;
+ }
+
+ /*
+ * Step 3:
+ * combine values
+ */
+ hw->clock_mult = best_mult - 1;
+ hw->clock_div = div2 << 6 | (best_div1 - 1);
+
+ vco = ref_ps * best_div1 / best_mult;
+ if ((ref_ps == 40690) && (vco < 5556))
+ /* Set VFSEL when VCO > 180MHz (5.556 ps). */
+ hw->clock_div |= EXT_DCLK_DIV_VFSEL;
+
+ return 0;
+}
+
+/*
+ * Set the User Defined Part of the Display
+ */
+static int
+cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct cfb_info *cfb = (struct cfb_info *)info;
+ struct par_info hw;
+ unsigned int mem;
+ int err;
+
+ var->transp.msb_right = 0;
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+
+ switch (var->bits_per_pixel) {
+ case 8: /* PSEUDOCOLOUR, 256 */
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->red.offset = 0;
+ var->red.length = 8;
+ var->green.offset = 0;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ break;
+
+ case 16:/* DIRECTCOLOUR, 64k or 32k */
+ switch (var->green.length) {
+ case 6: /* RGB565, 64k */
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ break;
+
+ default:
+ case 5: /* RGB555, 32k */
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->red.offset = 10;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 5;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ break;
+
+ case 4: /* RGB444, 4k + transparency? */
+ var->transp.offset = 12;
+ var->transp.length = 4;
+ var->red.offset = 8;
+ var->red.length = 4;
+ var->green.offset = 4;
+ var->green.length = 4;
+ var->blue.offset = 0;
+ var->blue.length = 4;
+ break;
+ }
+ break;
+
+ case 24:/* TRUECOLOUR, 16m */
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ break;
+
+ case 32:/* TRUECOLOUR, 16m */
+ var->transp.offset = 24;
+ var->transp.length = 8;
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8);
+ if (mem > cfb->fb.fix.smem_len)
+ var->yres_virtual = cfb->fb.fix.smem_len * 8 /
+ (var->bits_per_pixel * var->xres_virtual);
+
+ if (var->yres > var->yres_virtual)
+ var->yres = var->yres_virtual;
+ if (var->xres > var->xres_virtual)
+ var->xres = var->xres_virtual;
+
+ err = cyber2000fb_decode_clock(&hw, cfb, var);
+ if (err)
+ return err;
+
+ err = cyber2000fb_decode_crtc(&hw, cfb, var);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int cyber2000fb_set_par(struct fb_info *info)
+{
+ struct cfb_info *cfb = (struct cfb_info *)info;
+ struct fb_var_screeninfo *var = &cfb->fb.var;
+ struct par_info hw;
+ unsigned int mem;
+
+ hw.width = var->xres_virtual;
+ hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT;
+
+ switch (var->bits_per_pixel) {
+ case 8:
+ hw.co_pixfmt = CO_PIXFMT_8BPP;
+ hw.pitch = hw.width >> 3;
+ hw.extseqmisc = EXT_SEQ_MISC_8;
+ break;
+
+ case 16:
+ hw.co_pixfmt = CO_PIXFMT_16BPP;
+ hw.pitch = hw.width >> 2;
+
+ switch (var->green.length) {
+ case 6: /* RGB565, 64k */
+ hw.extseqmisc = EXT_SEQ_MISC_16_RGB565;
+ break;
+ case 5: /* RGB555, 32k */
+ hw.extseqmisc = EXT_SEQ_MISC_16_RGB555;
+ break;
+ case 4: /* RGB444, 4k + transparency? */
+ hw.extseqmisc = EXT_SEQ_MISC_16_RGB444;
+ break;
+ default:
+ BUG();
+ }
+ case 24:/* TRUECOLOUR, 16m */
+ hw.co_pixfmt = CO_PIXFMT_24BPP;
+ hw.width *= 3;
+ hw.pitch = hw.width >> 3;
+ hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
+ hw.extseqmisc = EXT_SEQ_MISC_24_RGB888;
+ break;
+
+ case 32:/* TRUECOLOUR, 16m */
+ hw.co_pixfmt = CO_PIXFMT_32BPP;
+ hw.pitch = hw.width >> 1;
+ hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
+ hw.extseqmisc = EXT_SEQ_MISC_32;
+ break;
+
+ default:
+ BUG();
+ }
+
+ /*
+ * Sigh, this is absolutely disgusting, but caused by
+ * the way the fbcon developers want to separate out
+ * the "checking" and the "setting" of the video mode.
+ *
+ * If the mode is not suitable for the hardware here,
+ * we can't prevent it being set by returning an error.
+ *
+ * In theory, since NetWinders contain just one VGA card,
+ * we should never end up hitting this problem.
+ */
+ BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0);
+ BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0);
+
+ hw.width -= 1;
+ hw.fetch = hw.pitch;
+ if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT))
+ hw.fetch <<= 1;
+ hw.fetch += 1;
+
+ cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+ /*
+ * Same here - if the size of the video mode exceeds the
+ * available RAM, we can't prevent this mode being set.
+ *
+ * In theory, since NetWinders contain just one VGA card,
+ * we should never end up hitting this problem.
+ */
+ mem = cfb->fb.fix.line_length * var->yres_virtual;
+ BUG_ON(mem > cfb->fb.fix.smem_len);
+
+ /*
+ * 8bpp displays are always pseudo colour. 16bpp and above
+ * are direct colour or true colour, depending on whether
+ * the RAMDAC palettes are bypassed. (Direct colour has
+ * palettes, true colour does not.)
+ */
+ if (var->bits_per_pixel == 8)
+ cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ else if (hw.ramdac & RAMDAC_BYPASS)
+ cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+ else
+ cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR;
+
+ cyber2000fb_set_timing(cfb, &hw);
+ cyber2000fb_update_start(cfb, var);
+
+ return 0;
+}
+
+
+/*
+ * Pan or Wrap the Display
+ */
+static int
+cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct cfb_info *cfb = (struct cfb_info *)info;
+
+ if (cyber2000fb_update_start(cfb, var))
+ return -EINVAL;
+
+ cfb->fb.var.xoffset = var->xoffset;
+ cfb->fb.var.yoffset = var->yoffset;
+
+ if (var->vmode & FB_VMODE_YWRAP) {
+ cfb->fb.var.vmode |= FB_VMODE_YWRAP;
+ } else {
+ cfb->fb.var.vmode &= ~FB_VMODE_YWRAP;
+ }
+
+ return 0;
+}
+
+/*
+ * (Un)Blank the display.
+ *
+ * Blank the screen if blank_mode != 0, else unblank. If
+ * blank == NULL then the caller blanks by setting the CLUT
+ * (Color Look Up Table) to all black. Return 0 if blanking
+ * succeeded, != 0 if un-/blanking failed due to e.g. a
+ * video mode which doesn't support it. Implements VESA
+ * suspend and powerdown modes on hardware that supports
+ * disabling hsync/vsync:
+ * blank_mode == 2: suspend vsync
+ * blank_mode == 3: suspend hsync
+ * blank_mode == 4: powerdown
+ *
+ * wms...Enable VESA DMPS compatible powerdown mode
+ * run "setterm -powersave powerdown" to take advantage
+ */
+static int cyber2000fb_blank(int blank, struct fb_info *info)
+{
+ struct cfb_info *cfb = (struct cfb_info *)info;
+ unsigned int sync = 0;
+ int i;
+
+ switch (blank) {
+ case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */
+ sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND: /* hsync off */
+ sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0;
+ break;
+ case FB_BLANK_VSYNC_SUSPEND: /* vsync off */
+ sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL;
+ break;
+ case FB_BLANK_NORMAL: /* soft blank */
+ default: /* unblank */
+ break;
+ }
+
+ cyber2000_grphw(EXT_SYNC_CTL, sync, cfb);
+
+ if (blank <= 1) {
+ /* turn on ramdacs */
+ cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
+ cyber2000fb_write_ramdac_ctrl(cfb);
+ }
+
+ /*
+ * Soft blank/unblank the display.
+ */
+ if (blank) { /* soft blank */
+ for (i = 0; i < NR_PALETTE; i++) {
+ cyber2000fb_writeb(i, 0x3c8, cfb);
+ cyber2000fb_writeb(0, 0x3c9, cfb);
+ cyber2000fb_writeb(0, 0x3c9, cfb);
+ cyber2000fb_writeb(0, 0x3c9, cfb);
+ }
+ } else { /* unblank */
+ for (i = 0; i < NR_PALETTE; i++) {
+ cyber2000fb_writeb(i, 0x3c8, cfb);
+ cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb);
+ cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb);
+ cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb);
+ }
+ }
+
+ if (blank >= 2) {
+ /* turn off ramdacs */
+ cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN;
+ cyber2000fb_write_ramdac_ctrl(cfb);
+ }
+
+ return 0;
+}
+
+static struct fb_ops cyber2000fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = cyber2000fb_check_var,
+ .fb_set_par = cyber2000fb_set_par,
+ .fb_setcolreg = cyber2000fb_setcolreg,
+ .fb_blank = cyber2000fb_blank,
+ .fb_pan_display = cyber2000fb_pan_display,
+ .fb_fillrect = cyber2000fb_fillrect,
+ .fb_copyarea = cyber2000fb_copyarea,
+ .fb_imageblit = cyber2000fb_imageblit,
+ .fb_cursor = soft_cursor,
+ .fb_sync = cyber2000fb_sync,
+};
+
+/*
+ * This is the only "static" reference to the internal data structures
+ * of this driver. It is here solely at the moment to support the other
+ * CyberPro modules external to this driver.
+ */
+static struct cfb_info *int_cfb_info;
+
+/*
+ * Enable access to the extended registers
+ */
+void cyber2000fb_enable_extregs(struct cfb_info *cfb)
+{
+ cfb->func_use_count += 1;
+
+ if (cfb->func_use_count == 1) {
+ int old;
+
+ old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
+ old |= EXT_FUNC_CTL_EXTREGENBL;
+ cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
+ }
+}
+
+/*
+ * Disable access to the extended registers
+ */
+void cyber2000fb_disable_extregs(struct cfb_info *cfb)
+{
+ if (cfb->func_use_count == 1) {
+ int old;
+
+ old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
+ old &= ~EXT_FUNC_CTL_EXTREGENBL;
+ cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
+ }
+
+ if (cfb->func_use_count == 0)
+ printk(KERN_ERR "disable_extregs: count = 0\n");
+ else
+ cfb->func_use_count -= 1;
+}
+
+void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var)
+{
+ memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo));
+}
+
+/*
+ * Attach a capture/tv driver to the core CyberX0X0 driver.
+ */
+int cyber2000fb_attach(struct cyberpro_info *info, int idx)
+{
+ if (int_cfb_info != NULL) {
+ info->dev = int_cfb_info->dev;
+ info->regs = int_cfb_info->regs;
+ info->fb = int_cfb_info->fb.screen_base;
+ info->fb_size = int_cfb_info->fb.fix.smem_len;
+ info->enable_extregs = cyber2000fb_enable_extregs;
+ info->disable_extregs = cyber2000fb_disable_extregs;
+ info->info = int_cfb_info;
+
+ strlcpy(info->dev_name, int_cfb_info->fb.fix.id, sizeof(info->dev_name));
+ }
+
+ return int_cfb_info != NULL;
+}
+
+/*
+ * Detach a capture/tv driver from the core CyberX0X0 driver.
+ */
+void cyber2000fb_detach(int idx)
+{
+}
+
+EXPORT_SYMBOL(cyber2000fb_attach);
+EXPORT_SYMBOL(cyber2000fb_detach);
+EXPORT_SYMBOL(cyber2000fb_enable_extregs);
+EXPORT_SYMBOL(cyber2000fb_disable_extregs);
+EXPORT_SYMBOL(cyber2000fb_get_fb_var);
+
+/*
+ * These parameters give
+ * 640x480, hsync 31.5kHz, vsync 60Hz
+ */
+static struct fb_videomode __devinitdata cyber2000fb_default_mode = {
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39722,
+ .left_margin = 56,
+ .right_margin = 16,
+ .upper_margin = 34,
+ .lower_margin = 9,
+ .hsync_len = 88,
+ .vsync_len = 2,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+static char igs_regs[] = {
+ EXT_CRT_IRQ, 0,
+ EXT_CRT_TEST, 0,
+ EXT_SYNC_CTL, 0,
+ EXT_SEG_WRITE_PTR, 0,
+ EXT_SEG_READ_PTR, 0,
+ EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE |
+ EXT_BIU_MISC_COP_ENABLE |
+ EXT_BIU_MISC_COP_BFC,
+ EXT_FUNC_CTL, 0,
+ CURS_H_START, 0,
+ CURS_H_START + 1, 0,
+ CURS_H_PRESET, 0,
+ CURS_V_START, 0,
+ CURS_V_START + 1, 0,
+ CURS_V_PRESET, 0,
+ CURS_CTL, 0,
+ EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT,
+ EXT_OVERSCAN_RED, 0,
+ EXT_OVERSCAN_GREEN, 0,
+ EXT_OVERSCAN_BLUE, 0,
+
+ /* some of these are questionable when we have a BIOS */
+ EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK |
+ EXT_MEM_CTL0_RAS_1 |
+ EXT_MEM_CTL0_MULTCAS,
+ EXT_HIDDEN_CTL1, 0x30,
+ EXT_FIFO_CTL, 0x0b,
+ EXT_FIFO_CTL + 1, 0x17,
+ 0x76, 0x00,
+ EXT_HIDDEN_CTL4, 0xc8
+};
+
+/*
+ * Initialise the CyberPro hardware. On the CyberPro5XXXX,
+ * ensure that we're using the correct PLL (5XXX's may be
+ * programmed to use an additional set of PLLs.)
+ */
+static void cyberpro_init_hw(struct cfb_info *cfb)
+{
+ int i;
+
+ for (i = 0; i < sizeof(igs_regs); i += 2)
+ cyber2000_grphw(igs_regs[i], igs_regs[i+1], cfb);
+
+ if (cfb->id == ID_CYBERPRO_5000) {
+ unsigned char val;
+ cyber2000fb_writeb(0xba, 0x3ce, cfb);
+ val = cyber2000fb_readb(0x3cf, cfb) & 0x80;
+ cyber2000fb_writeb(val, 0x3cf, cfb);
+ }
+}
+
+static struct cfb_info * __devinit
+cyberpro_alloc_fb_info(unsigned int id, char *name)
+{
+ struct cfb_info *cfb;
+
+ cfb = kmalloc(sizeof(struct cfb_info) +
+ sizeof(u32) * 16, GFP_KERNEL);
+
+ if (!cfb)
+ return NULL;
+
+ memset(cfb, 0, sizeof(struct cfb_info));
+
+ cfb->id = id;
+
+ if (id == ID_CYBERPRO_5000)
+ cfb->ref_ps = 40690; // 24.576 MHz
+ else
+ cfb->ref_ps = 69842; // 14.31818 MHz (69841?)
+
+ cfb->divisors[0] = 1;
+ cfb->divisors[1] = 2;
+ cfb->divisors[2] = 4;
+
+ if (id == ID_CYBERPRO_2000)
+ cfb->divisors[3] = 8;
+ else
+ cfb->divisors[3] = 6;
+
+ strcpy(cfb->fb.fix.id, name);
+
+ cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
+ cfb->fb.fix.type_aux = 0;
+ cfb->fb.fix.xpanstep = 0;
+ cfb->fb.fix.ypanstep = 1;
+ cfb->fb.fix.ywrapstep = 0;
+
+ switch (id) {
+ case ID_IGA_1682:
+ cfb->fb.fix.accel = 0;
+ break;
+
+ case ID_CYBERPRO_2000:
+ cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000;
+ break;
+
+ case ID_CYBERPRO_2010:
+ cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010;
+ break;
+
+ case ID_CYBERPRO_5000:
+ cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000;
+ break;
+ }
+
+ cfb->fb.var.nonstd = 0;
+ cfb->fb.var.activate = FB_ACTIVATE_NOW;
+ cfb->fb.var.height = -1;
+ cfb->fb.var.width = -1;
+ cfb->fb.var.accel_flags = FB_ACCELF_TEXT;
+
+ cfb->fb.fbops = &cyber2000fb_ops;
+ cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+ cfb->fb.pseudo_palette = (void *)(cfb + 1);
+
+ fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
+
+ return cfb;
+}
+
+static void
+cyberpro_free_fb_info(struct cfb_info *cfb)
+{
+ if (cfb) {
+ /*
+ * Free the colourmap
+ */
+ fb_alloc_cmap(&cfb->fb.cmap, 0, 0);
+
+ kfree(cfb);
+ }
+}
+
+/*
+ * Parse Cyber2000fb options. Usage:
+ * video=cyber2000:font:fontname
+ */
+#ifndef MODULE
+static int
+cyber2000fb_setup(char *options)
+{
+ char *opt;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+
+ if (strncmp(opt, "font:", 5) == 0) {
+ static char default_font_storage[40];
+
+ strlcpy(default_font_storage, opt + 5, sizeof(default_font_storage));
+ default_font = default_font_storage;
+ continue;
+ }
+
+ printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
+ }
+ return 0;
+}
+#endif /* MODULE */
+
+/*
+ * The CyberPro chips can be placed on many different bus types.
+ * This probe function is common to all bus types. The bus-specific
+ * probe function is expected to have:
+ * - enabled access to the linear memory region
+ * - memory mapped access to the registers
+ * - initialised mem_ctl1 and mem_ctl2 appropriately.
+ */
+static int __devinit cyberpro_common_probe(struct cfb_info *cfb)
+{
+ u_long smem_size;
+ u_int h_sync, v_sync;
+ int err;
+
+ cyberpro_init_hw(cfb);
+
+ /*
+ * Get the video RAM size and width from the VGA register.
+ * This should have been already initialised by the BIOS,
+ * but if it's garbage, claim default 1MB VRAM (woody)
+ */
+ cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb);
+ cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb);
+
+ /*
+ * Determine the size of the memory.
+ */
+ switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) {
+ case MEM_CTL2_SIZE_4MB: smem_size = 0x00400000; break;
+ case MEM_CTL2_SIZE_2MB: smem_size = 0x00200000; break;
+ case MEM_CTL2_SIZE_1MB: smem_size = 0x00100000; break;
+ default: smem_size = 0x00100000; break;
+ }
+
+ cfb->fb.fix.smem_len = smem_size;
+ cfb->fb.fix.mmio_len = MMIO_SIZE;
+ cfb->fb.screen_base = cfb->region;
+
+ err = -EINVAL;
+ if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
+ &cyber2000fb_default_mode, 8)) {
+ printk("%s: no valid mode found\n", cfb->fb.fix.id);
+ goto failed;
+ }
+
+ cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 /
+ (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual);
+
+ if (cfb->fb.var.yres_virtual < cfb->fb.var.yres)
+ cfb->fb.var.yres_virtual = cfb->fb.var.yres;
+
+// fb_set_var(&cfb->fb.var, -1, &cfb->fb);
+
+ /*
+ * Calculate the hsync and vsync frequencies. Note that
+ * we split the 1e12 constant up so that we can preserve
+ * the precision and fit the results into 32-bit registers.
+ * (1953125000 * 512 = 1e12)
+ */
+ h_sync = 1953125000 / cfb->fb.var.pixclock;
+ h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin +
+ cfb->fb.var.right_margin + cfb->fb.var.hsync_len);
+ v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin +
+ cfb->fb.var.lower_margin + cfb->fb.var.vsync_len);
+
+ printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
+ cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10,
+ cfb->fb.var.xres, cfb->fb.var.yres,
+ h_sync / 1000, h_sync % 1000, v_sync);
+
+ if (cfb->dev)
+ cfb->fb.device = &cfb->dev->dev;
+ err = register_framebuffer(&cfb->fb);
+
+failed:
+ return err;
+}
+
+static void cyberpro_common_resume(struct cfb_info *cfb)
+{
+ cyberpro_init_hw(cfb);
+
+ /*
+ * Reprogram the MEM_CTL1 and MEM_CTL2 registers
+ */
+ cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb);
+ cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb);
+
+ /*
+ * Restore the old video mode and the palette.
+ * We also need to tell fbcon to redraw the console.
+ */
+ cyber2000fb_set_par(&cfb->fb);
+}
+
+#ifdef CONFIG_ARCH_SHARK
+
+#include <asm/arch/hardware.h>
+
+static int __devinit
+cyberpro_vl_probe(void)
+{
+ struct cfb_info *cfb;
+ int err = -ENOMEM;
+
+ if (!request_mem_region(FB_START,FB_SIZE,"CyberPro2010")) return err;
+
+ cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
+ if (!cfb)
+ goto failed_release;
+
+ cfb->dev = NULL;
+ cfb->region = ioremap(FB_START,FB_SIZE);
+ if (!cfb->region)
+ goto failed_ioremap;
+
+ cfb->regs = cfb->region + MMIO_OFFSET;
+ cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
+ cfb->fb.fix.smem_start = FB_START;
+
+ /*
+ * Bring up the hardware. This is expected to enable access
+ * to the linear memory region, and allow access to the memory
+ * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
+ * initialised.
+ */
+ cyber2000fb_writeb(0x18, 0x46e8, cfb);
+ cyber2000fb_writeb(0x01, 0x102, cfb);
+ cyber2000fb_writeb(0x08, 0x46e8, cfb);
+ cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
+ cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
+
+ cfb->mclk_mult = 0xdb;
+ cfb->mclk_div = 0x54;
+
+ err = cyberpro_common_probe(cfb);
+ if (err)
+ goto failed;
+
+ if (int_cfb_info == NULL)
+ int_cfb_info = cfb;
+
+ return 0;
+
+failed:
+ iounmap(cfb->region);
+failed_ioremap:
+ cyberpro_free_fb_info(cfb);
+failed_release:
+ release_mem_region(FB_START,FB_SIZE);
+
+ return err;
+}
+#endif /* CONFIG_ARCH_SHARK */
+
+/*
+ * PCI specific support.
+ */
+#ifdef CONFIG_PCI
+/*
+ * We need to wake up the CyberPro, and make sure its in linear memory
+ * mode. Unfortunately, this is specific to the platform and card that
+ * we are running on.
+ *
+ * On x86 and ARM, should we be initialising the CyberPro first via the
+ * IO registers, and then the MMIO registers to catch all cases? Can we
+ * end up in the situation where the chip is in MMIO mode, but not awake
+ * on an x86 system?
+ */
+static int cyberpro_pci_enable_mmio(struct cfb_info *cfb)
+{
+ unsigned char val;
+
+#if defined(__sparc_v9__)
+#error "You lose, consult DaveM."
+#elif defined(__sparc__)
+ /*
+ * SPARC does not have an "outb" instruction, so we generate
+ * I/O cycles storing into a reserved memory space at
+ * physical address 0x3000000
+ */
+ unsigned char *iop;
+
+ iop = ioremap(0x3000000, 0x5000);
+ if (iop == NULL) {
+ prom_printf("iga5000: cannot map I/O\n");
+ return -ENOMEM;
+ }
+
+ writeb(0x18, iop + 0x46e8);
+ writeb(0x01, iop + 0x102);
+ writeb(0x08, iop + 0x46e8);
+ writeb(EXT_BIU_MISC, iop + 0x3ce);
+ writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf);
+
+ iounmap((void *)iop);
+#else
+ /*
+ * Most other machine types are "normal", so
+ * we use the standard IO-based wakeup.
+ */
+ outb(0x18, 0x46e8);
+ outb(0x01, 0x102);
+ outb(0x08, 0x46e8);
+ outb(EXT_BIU_MISC, 0x3ce);
+ outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf);
+#endif
+
+ /*
+ * Allow the CyberPro to accept PCI burst accesses
+ */
+ val = cyber2000_grphr(EXT_BUS_CTL, cfb);
+ if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
+ printk(KERN_INFO "%s: enabling PCI bursts\n", cfb->fb.fix.id);
+
+ val |= EXT_BUS_CTL_PCIBURST_WRITE;
+
+ if (cfb->id == ID_CYBERPRO_5000)
+ val |= EXT_BUS_CTL_PCIBURST_READ;
+
+ cyber2000_grphw(EXT_BUS_CTL, val, cfb);
+ }
+
+ return 0;
+}
+
+static int __devinit
+cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct cfb_info *cfb;
+ char name[16];
+ int err;
+
+ sprintf(name, "CyberPro%4X", id->device);
+
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
+
+ err = pci_request_regions(dev, name);
+ if (err)
+ return err;
+
+ err = -ENOMEM;
+ cfb = cyberpro_alloc_fb_info(id->driver_data, name);
+ if (!cfb)
+ goto failed_release;
+
+ cfb->dev = dev;
+ cfb->region = ioremap(pci_resource_start(dev, 0),
+ pci_resource_len(dev, 0));
+ if (!cfb->region)
+ goto failed_ioremap;
+
+ cfb->regs = cfb->region + MMIO_OFFSET;
+ cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
+ cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
+
+ /*
+ * Bring up the hardware. This is expected to enable access
+ * to the linear memory region, and allow access to the memory
+ * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
+ * initialised.
+ */
+ err = cyberpro_pci_enable_mmio(cfb);
+ if (err)
+ goto failed;
+
+ /*
+ * Use MCLK from BIOS. FIXME: what about hotplug?
+ */
+ cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
+ cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb);
+
+#ifdef __arm__
+ /*
+ * MCLK on the NetWinder and the Shark is fixed at 75MHz
+ */
+ if (machine_is_netwinder()) {
+ cfb->mclk_mult = 0xdb;
+ cfb->mclk_div = 0x54;
+ }
+#endif
+
+ err = cyberpro_common_probe(cfb);
+ if (err)
+ goto failed;
+
+ /*
+ * Our driver data
+ */
+ pci_set_drvdata(dev, cfb);
+ if (int_cfb_info == NULL)
+ int_cfb_info = cfb;
+
+ return 0;
+
+failed:
+ iounmap(cfb->region);
+failed_ioremap:
+ cyberpro_free_fb_info(cfb);
+failed_release:
+ pci_release_regions(dev);
+
+ return err;
+}
+
+static void __devexit cyberpro_pci_remove(struct pci_dev *dev)
+{
+ struct cfb_info *cfb = pci_get_drvdata(dev);
+
+ if (cfb) {
+ /*
+ * If unregister_framebuffer fails, then
+ * we will be leaving hooks that could cause
+ * oopsen laying around.
+ */
+ if (unregister_framebuffer(&cfb->fb))
+ printk(KERN_WARNING "%s: danger Will Robinson, "
+ "danger danger! Oopsen imminent!\n",
+ cfb->fb.fix.id);
+ iounmap(cfb->region);
+ cyberpro_free_fb_info(cfb);
+
+ /*
+ * Ensure that the driver data is no longer
+ * valid.
+ */
+ pci_set_drvdata(dev, NULL);
+ if (cfb == int_cfb_info)
+ int_cfb_info = NULL;
+
+ pci_release_regions(dev);
+ }
+}
+
+static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ return 0;
+}
+
+/*
+ * Re-initialise the CyberPro hardware
+ */
+static int cyberpro_pci_resume(struct pci_dev *dev)
+{
+ struct cfb_info *cfb = pci_get_drvdata(dev);
+
+ if (cfb) {
+ cyberpro_pci_enable_mmio(cfb);
+ cyberpro_common_resume(cfb);
+ }
+
+ return 0;
+}
+
+static struct pci_device_id cyberpro_pci_table[] = {
+// Not yet
+// { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
+// PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 },
+ { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 },
+ { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 },
+ { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci,cyberpro_pci_table);
+
+static struct pci_driver cyberpro_driver = {
+ .name = "CyberPro",
+ .probe = cyberpro_pci_probe,
+ .remove = __devexit_p(cyberpro_pci_remove),
+ .suspend = cyberpro_pci_suspend,
+ .resume = cyberpro_pci_resume,
+ .id_table = cyberpro_pci_table
+};
+#endif
+
+/*
+ * I don't think we can use the "module_init" stuff here because
+ * the fbcon stuff may not be initialised yet. Hence the #ifdef
+ * around module_init.
+ *
+ * Tony: "module_init" is now required
+ */
+static int __init cyber2000fb_init(void)
+{
+ int ret = -1, err;
+
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("cyber2000fb", &option))
+ return -ENODEV;
+ cyber2000fb_setup(option);
+#endif
+
+#ifdef CONFIG_ARCH_SHARK
+ err = cyberpro_vl_probe();
+ if (!err) {
+ ret = 0;
+ __module_get(THIS_MODULE);
+ }
+#endif
+#ifdef CONFIG_PCI
+ err = pci_register_driver(&cyberpro_driver);
+ if (!err)
+ ret = 0;
+#endif
+
+ return ret ? err : 0;
+}
+
+static void __exit cyberpro_exit(void)
+{
+ pci_unregister_driver(&cyberpro_driver);
+}
+
+module_init(cyber2000fb_init);
+module_exit(cyberpro_exit);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud