1 files changed, 24 insertions, 12 deletions

diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index fb2b0f5..35e8eb0 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1853,13 +1853,14 @@ static void aty128_bl_exit(struct backlight_device *bd)
  *  Initialisation
  */
 
-#ifdef CONFIG_PPC_PMAC
+#ifdef CONFIG_PPC_PMAC__disabled
 static void aty128_early_resume(void *data)
 {
         struct aty128fb_par *par = data;
 
 	if (try_acquire_console_sem())
 		return;
+	pci_restore_state(par->pdev);
 	aty128_do_resume(par->pdev);
 	release_console_sem();
 }
@@ -1907,7 +1908,14 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i
 		/* Indicate sleep capability */
 		if (par->chip_gen == rage_M3) {
 			pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+       * others we now rely on the PCI core restoring the config space for us, which
+       * isn't the case with that hack, and that code path causes various things to
+       * be called with interrupts off while they shouldn't. I'm leaving the code in
+       * as it can be useful for debugging purposes
+       */
 			pmac_set_early_video_resume(aty128_early_resume, par);
+#endif
 		}
 
 		/* Find default mode */
@@ -2365,7 +2373,6 @@ static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, int dx
 static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
 {
 	u32	pmgt;
-	u16	pwr_command;
 	struct pci_dev *pdev = par->pdev;
 
 	if (!par->pm_reg)
@@ -2374,6 +2381,8 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
 	/* Set the chip into the appropriate suspend mode (we use D2,
 	 * D3 would require a complete re-initialisation of the chip,
 	 * including PCI config registers, clocks, AGP configuration, ...)
+	 *
+	 * For resume, the core will have already brought us back to D0
 	 */
 	if (suspend) {
 		/* Make sure CRTC2 is reset. Remove that the day we decide to
@@ -2391,17 +2400,9 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
 		aty_st_le32(BUS_CNTL1, 0x00000010);
 		aty_st_le32(MEM_POWER_MISC, 0x0c830000);
 		mdelay(100);
-		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+
 		/* Switch PCI power management to D2 */
-		pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
-			(pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
-		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
-	} else {
-		/* Switch back PCI power management to D0 */
-		mdelay(100);
-		pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
-		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
-		mdelay(100);
+		pci_set_power_state(pdev, PCI_D2);
 	}
 }
 
@@ -2410,6 +2411,12 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct aty128fb_par *par = info->par;
 
+	/* Because we may change PCI D state ourselves, we need to
+	 * first save the config space content so the core can
+	 * restore it properly on resume.
+	 */
+	pci_save_state(pdev);
+
 	/* We don't do anything but D2, for now we return 0, but
 	 * we may want to change that. How do we know if the BIOS
 	 * can properly take care of D3 ? Also, with swsusp, we
@@ -2476,6 +2483,11 @@ static int aty128_do_resume(struct pci_dev *pdev)
 	if (pdev->dev.power.power_state.event == PM_EVENT_ON)
 		return 0;
 
+	/* PCI state will have been restored by the core, so
+	 * we should be in D0 now with our config space fully
+	 * restored
+	 */
+
 	/* Wakeup chip */
 	aty128_set_suspend(par, 0);
 	par->asleep = 0;