diff options
Diffstat (limited to 'drivers/uwb')
| -rw-r--r-- | drivers/uwb/address.c | 374 | ||||
| -rw-r--r-- | drivers/uwb/beacon.c | 644 | ||||
| -rw-r--r-- | drivers/uwb/ie.c | 570 | ||||
| -rw-r--r-- | drivers/uwb/scan.c | 133 |
4 files changed, 1721 insertions, 0 deletions
diff --git a/drivers/uwb/address.c b/drivers/uwb/address.c new file mode 100644 index 0000000..1664ae5 --- /dev/null +++ b/drivers/uwb/address.c @@ -0,0 +1,374 @@ +/* + * Ultra Wide Band + * Address management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/random.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include "uwb-internal.h" + + +/** Device Address Management command */ +struct uwb_rc_cmd_dev_addr_mgmt { + struct uwb_rccb rccb; + u8 bmOperationType; + u8 baAddr[6]; +} __attribute__((packed)); + + +/** + * Low level command for setting/getting UWB radio's addresses + * + * @hwarc: HWA Radio Control interface instance + * @bmOperationType: + * Set/get, MAC/DEV (see WUSB1.0[8.6.2.2]) + * @baAddr: address buffer--assumed to have enough data to hold + * the address type requested. + * @reply: Pointer to reply buffer (can be stack allocated) + * @returns: 0 if ok, < 0 errno code on error. + * + * @cmd has to be allocated because USB cannot grok USB or vmalloc + * buffers depending on your combination of host architecture. + */ +static +int uwb_rc_dev_addr_mgmt(struct uwb_rc *rc, + u8 bmOperationType, const u8 *baAddr, + struct uwb_rc_evt_dev_addr_mgmt *reply) +{ + int result; + struct uwb_rc_cmd_dev_addr_mgmt *cmd; + + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_DEV_ADDR_MGMT); + cmd->bmOperationType = bmOperationType; + if (baAddr) { + size_t size = 0; + switch (bmOperationType >> 1) { + case 0: size = 2; break; + case 1: size = 6; break; + default: BUG(); + } + memcpy(cmd->baAddr, baAddr, size); + } + reply->rceb.bEventType = UWB_RC_CET_GENERAL; + reply->rceb.wEvent = UWB_RC_CMD_DEV_ADDR_MGMT; + result = uwb_rc_cmd(rc, "DEV-ADDR-MGMT", + &cmd->rccb, sizeof(*cmd), + &reply->rceb, sizeof(*reply)); + if (result < 0) + goto error_cmd; + if (result < sizeof(*reply)) { + dev_err(&rc->uwb_dev.dev, + "DEV-ADDR-MGMT: not enough data replied: " + "%d vs %zu bytes needed\n", result, sizeof(*reply)); + result = -ENOMSG; + } else if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "DEV-ADDR-MGMT: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply->bResultCode), + reply->bResultCode); + result = -EIO; + } else + result = 0; +error_cmd: + kfree(cmd); +error_kzalloc: + return result; +} + + +/** + * Set the UWB RC MAC or device address. + * + * @rc: UWB Radio Controller + * @_addr: Pointer to address to write [assumed to be either a + * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *']. + * @type: Type of address to set (UWB_ADDR_DEV or UWB_ADDR_MAC). + * @returns: 0 if ok, < 0 errno code on error. + * + * Some anal retentivity here: even if both 'struct + * uwb_{dev,mac}_addr' have the actual byte array in the same offset + * and I could just pass _addr to hwarc_cmd_dev_addr_mgmt(), I prefer + * to use some syntatic sugar in case someday we decide to change the + * format of the structs. The compiler will optimize it out anyway. + */ +static int uwb_rc_addr_set(struct uwb_rc *rc, + const void *_addr, enum uwb_addr_type type) +{ + int result; + u8 bmOperationType = 0x1; /* Set address */ + const struct uwb_dev_addr *dev_addr = _addr; + const struct uwb_mac_addr *mac_addr = _addr; + struct uwb_rc_evt_dev_addr_mgmt reply; + const u8 *baAddr; + + result = -EINVAL; + switch (type) { + case UWB_ADDR_DEV: + baAddr = dev_addr->data; + break; + case UWB_ADDR_MAC: + baAddr = mac_addr->data; + bmOperationType |= 0x2; + break; + default: + return result; + } + return uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &reply); +} + + +/** + * Get the UWB radio's MAC or device address. + * + * @rc: UWB Radio Controller + * @_addr: Where to write the address data [assumed to be either a + * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *']. + * @type: Type of address to get (UWB_ADDR_DEV or UWB_ADDR_MAC). + * @returns: 0 if ok (and *_addr set), < 0 errno code on error. + * + * See comment in uwb_rc_addr_set() about anal retentivity in the + * type handling of the address variables. + */ +static int uwb_rc_addr_get(struct uwb_rc *rc, + void *_addr, enum uwb_addr_type type) +{ + int result; + u8 bmOperationType = 0x0; /* Get address */ + struct uwb_rc_evt_dev_addr_mgmt evt; + struct uwb_dev_addr *dev_addr = _addr; + struct uwb_mac_addr *mac_addr = _addr; + u8 *baAddr; + + result = -EINVAL; + switch (type) { + case UWB_ADDR_DEV: + baAddr = dev_addr->data; + break; + case UWB_ADDR_MAC: + bmOperationType |= 0x2; + baAddr = mac_addr->data; + break; + default: + return result; + } + result = uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &evt); + if (result == 0) + switch (type) { + case UWB_ADDR_DEV: + memcpy(&dev_addr->data, evt.baAddr, + sizeof(dev_addr->data)); + break; + case UWB_ADDR_MAC: + memcpy(&mac_addr->data, evt.baAddr, + sizeof(mac_addr->data)); + break; + default: /* shut gcc up */ + BUG(); + } + return result; +} + + +/** Get @rc's MAC address to @addr */ +int uwb_rc_mac_addr_get(struct uwb_rc *rc, + struct uwb_mac_addr *addr) { + return uwb_rc_addr_get(rc, addr, UWB_ADDR_MAC); +} +EXPORT_SYMBOL_GPL(uwb_rc_mac_addr_get); + + +/** Get @rc's device address to @addr */ +int uwb_rc_dev_addr_get(struct uwb_rc *rc, + struct uwb_dev_addr *addr) { + return uwb_rc_addr_get(rc, addr, UWB_ADDR_DEV); +} +EXPORT_SYMBOL_GPL(uwb_rc_dev_addr_get); + + +/** Set @rc's address to @addr */ +int uwb_rc_mac_addr_set(struct uwb_rc *rc, + const struct uwb_mac_addr *addr) +{ + int result = -EINVAL; + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_addr_set(rc, addr, UWB_ADDR_MAC); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + + +/** Set @rc's address to @addr */ +int uwb_rc_dev_addr_set(struct uwb_rc *rc, + const struct uwb_dev_addr *addr) +{ + int result = -EINVAL; + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_addr_set(rc, addr, UWB_ADDR_DEV); + rc->uwb_dev.dev_addr = *addr; + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* Returns !0 if given address is already assigned to device. */ +int __uwb_mac_addr_assigned_check(struct device *dev, void *_addr) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_mac_addr *addr = _addr; + + if (!uwb_mac_addr_cmp(addr, &uwb_dev->mac_addr)) + return !0; + return 0; +} + +/* Returns !0 if given address is already assigned to device. */ +int __uwb_dev_addr_assigned_check(struct device *dev, void *_addr) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_dev_addr *addr = _addr; + if (!uwb_dev_addr_cmp(addr, &uwb_dev->dev_addr)) + return !0; + return 0; +} + +/** + * uwb_dev_addr_assign - assigned a generated DevAddr to a radio controller + * @rc: the (local) radio controller device requiring a new DevAddr + * + * A new DevAddr is required when: + * - first setting up a radio controller + * - if the hardware reports a DevAddr conflict + * + * The DevAddr is randomly generated in the generated DevAddr range + * [0x100, 0xfeff]. The number of devices in a beacon group is limited + * by mMaxBPLength (96) so this address space will never be exhausted. + * + * [ECMA-368] 17.1.1, 17.16. + */ +int uwb_rc_dev_addr_assign(struct uwb_rc *rc) +{ + struct uwb_dev_addr new_addr; + + do { + get_random_bytes(new_addr.data, sizeof(new_addr.data)); + } while (new_addr.data[0] == 0x00 || new_addr.data[0] == 0xff + || __uwb_dev_addr_assigned(rc, &new_addr)); + + return uwb_rc_dev_addr_set(rc, &new_addr); +} + +/** + * uwbd_evt_handle_rc_dev_addr_conflict - handle a DEV_ADDR_CONFLICT event + * @evt: the DEV_ADDR_CONFLICT notification from the radio controller + * + * A new (non-conflicting) DevAddr is assigned to the radio controller. + * + * [ECMA-368] 17.1.1.1. + */ +int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt) +{ + struct uwb_rc *rc = evt->rc; + + return uwb_rc_dev_addr_assign(rc); +} + +/* + * Print the 48-bit EUI MAC address of the radio controller when + * reading /sys/class/uwb_rc/XX/mac_address + */ +static ssize_t uwb_rc_mac_addr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + struct uwb_mac_addr addr; + ssize_t result; + + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_addr_get(rc, &addr, UWB_ADDR_MAC); + mutex_unlock(&rc->uwb_dev.mutex); + if (result >= 0) { + result = uwb_mac_addr_print(buf, UWB_ADDR_STRSIZE, &addr); + buf[result++] = '\n'; + } + return result; +} + +/* + * Parse a 48 bit address written to /sys/class/uwb_rc/XX/mac_address + * and if correct, set it. + */ +static ssize_t uwb_rc_mac_addr_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + struct uwb_mac_addr addr; + ssize_t result; + + result = sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx\n", + &addr.data[0], &addr.data[1], &addr.data[2], + &addr.data[3], &addr.data[4], &addr.data[5]); + if (result != 6) { + result = -EINVAL; + goto out; + } + if (is_multicast_ether_addr(addr.data)) { + dev_err(&rc->uwb_dev.dev, "refusing to set multicast " + "MAC address %s\n", buf); + result = -EINVAL; + goto out; + } + result = uwb_rc_mac_addr_set(rc, &addr); + if (result == 0) + rc->uwb_dev.mac_addr = addr; +out: + return result < 0 ? result : size; +} +DEVICE_ATTR(mac_address, S_IRUGO | S_IWUSR, uwb_rc_mac_addr_show, uwb_rc_mac_addr_store); + +/** Print @addr to @buf, @return bytes written */ +size_t __uwb_addr_print(char *buf, size_t buf_size, const unsigned char *addr, + int type) +{ + size_t result; + if (type) + result = scnprintf(buf, buf_size, + "%02x:%02x:%02x:%02x:%02x:%02x", + addr[0], addr[1], addr[2], + addr[3], addr[4], addr[5]); + else + result = scnprintf(buf, buf_size, "%02x:%02x", + addr[1], addr[0]); + return result; +} +EXPORT_SYMBOL_GPL(__uwb_addr_print); diff --git a/drivers/uwb/beacon.c b/drivers/uwb/beacon.c new file mode 100644 index 0000000..f65a52c --- /dev/null +++ b/drivers/uwb/beacon.c @@ -0,0 +1,644 @@ +/* + * Ultra Wide Band + * Beacon management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/kdev_t.h> +#include "uwb-internal.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** Start Beaconing command structure */ +struct uwb_rc_cmd_start_beacon { + struct uwb_rccb rccb; + __le16 wBPSTOffset; + u8 bChannelNumber; +} __attribute__((packed)); + + +static int uwb_rc_start_beacon(struct uwb_rc *rc, u16 bpst_offset, u8 channel) +{ + int result; + struct uwb_rc_cmd_start_beacon *cmd; + struct uwb_rc_evt_confirm reply; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_START_BEACON); + cmd->wBPSTOffset = cpu_to_le16(bpst_offset); + cmd->bChannelNumber = channel; + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_START_BEACON; + result = uwb_rc_cmd(rc, "START-BEACON", &cmd->rccb, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "START-BEACON: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); + return result; +} + +static int uwb_rc_stop_beacon(struct uwb_rc *rc) +{ + int result; + struct uwb_rccb *cmd; + struct uwb_rc_evt_confirm reply; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_STOP_BEACON); + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_STOP_BEACON; + result = uwb_rc_cmd(rc, "STOP-BEACON", cmd, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "STOP-BEACON: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); + return result; +} + +/* + * Start/stop beacons + * + * @rc: UWB Radio Controller to operate on + * @channel: UWB channel on which to beacon (WUSB[table + * 5-12]). If -1, stop beaconing. + * @bpst_offset: Beacon Period Start Time offset; FIXME-do zero + * + * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB + * of a SET IE command after the device sent the first beacon that includes + * the IEs specified in the SET IE command. So, after we start beaconing we + * check if there is anything in the IE cache and call the SET IE command + * if needed. + */ +int uwb_rc_beacon(struct uwb_rc *rc, int channel, unsigned bpst_offset) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + + mutex_lock(&rc->uwb_dev.mutex); + if (channel < 0) + channel = -1; + if (channel == -1) + result = uwb_rc_stop_beacon(rc); + else { + /* channel >= 0...dah */ + result = uwb_rc_start_beacon(rc, bpst_offset, channel); + if (result < 0) + goto out_up; + if (le16_to_cpu(rc->ies->wIELength) > 0) { + result = uwb_rc_set_ie(rc, rc->ies); + if (result < 0) { + dev_err(dev, "Cannot set new IE on device: " + "%d\n", result); + result = uwb_rc_stop_beacon(rc); + channel = -1; + bpst_offset = 0; + } else + result = 0; + } + } + + if (result < 0) + goto out_up; + rc->beaconing = channel; + + uwb_notify(rc, NULL, uwb_bg_joined(rc) ? UWB_NOTIF_BG_JOIN : UWB_NOTIF_BG_LEAVE); + +out_up: + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* + * Beacon cache + * + * The purpose of this is to speed up the lookup of becon information + * when a new beacon arrives. The UWB Daemon uses it also to keep a + * tab of which devices are in radio distance and which not. When a + * device's beacon stays present for more than a certain amount of + * time, it is considered a new, usable device. When a beacon ceases + * to be received for a certain amount of time, it is considered that + * the device is gone. + * + * FIXME: use an allocator for the entries + * FIXME: use something faster for search than a list + */ + +struct uwb_beca uwb_beca = { + .list = LIST_HEAD_INIT(uwb_beca.list), + .mutex = __MUTEX_INITIALIZER(uwb_beca.mutex) +}; + + +void uwb_bce_kfree(struct kref *_bce) +{ + struct uwb_beca_e *bce = container_of(_bce, struct uwb_beca_e, refcnt); + + kfree(bce->be); + kfree(bce); +} + + +/* Find a beacon by dev addr in the cache */ +static +struct uwb_beca_e *__uwb_beca_find_bydev(const struct uwb_dev_addr *dev_addr) +{ + struct uwb_beca_e *bce, *next; + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + d_printf(6, NULL, "looking for addr %02x:%02x in %02x:%02x\n", + dev_addr->data[0], dev_addr->data[1], + bce->dev_addr.data[0], bce->dev_addr.data[1]); + if (!memcmp(&bce->dev_addr, dev_addr, sizeof(bce->dev_addr))) + goto out; + } + bce = NULL; +out: + return bce; +} + +/* Find a beacon by dev addr in the cache */ +static +struct uwb_beca_e *__uwb_beca_find_bymac(const struct uwb_mac_addr *mac_addr) +{ + struct uwb_beca_e *bce, *next; + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + if (!memcmp(bce->mac_addr, mac_addr->data, + sizeof(bce->mac_addr))) + goto out; + } + bce = NULL; +out: + return bce; +} + +/** + * uwb_dev_get_by_devaddr - get a UWB device with a specific DevAddr + * @rc: the radio controller that saw the device + * @devaddr: DevAddr of the UWB device to find + * + * There may be more than one matching device (in the case of a + * DevAddr conflict), but only the first one is returned. + */ +struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc, + const struct uwb_dev_addr *devaddr) +{ + struct uwb_dev *found = NULL; + struct uwb_beca_e *bce; + + mutex_lock(&uwb_beca.mutex); + bce = __uwb_beca_find_bydev(devaddr); + if (bce) + found = uwb_dev_try_get(rc, bce->uwb_dev); + mutex_unlock(&uwb_beca.mutex); + + return found; +} + +/** + * uwb_dev_get_by_macaddr - get a UWB device with a specific EUI-48 + * @rc: the radio controller that saw the device + * @devaddr: EUI-48 of the UWB device to find + */ +struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc, + const struct uwb_mac_addr *macaddr) +{ + struct uwb_dev *found = NULL; + struct uwb_beca_e *bce; + + mutex_lock(&uwb_beca.mutex); + bce = __uwb_beca_find_bymac(macaddr); + if (bce) + found = uwb_dev_try_get(rc, bce->uwb_dev); + mutex_unlock(&uwb_beca.mutex); + + return found; +} + +/* Initialize a beacon cache entry */ +static void uwb_beca_e_init(struct uwb_beca_e *bce) +{ + mutex_init(&bce->mutex); + kref_init(&bce->refcnt); + stats_init(&bce->lqe_stats); + stats_init(&bce->rssi_stats); +} + +/* + * Add a beacon to the cache + * + * @be: Beacon event information + * @bf: Beacon frame (part of b, really) + * @ts_jiffies: Timestamp (in jiffies) when the beacon was received + */ +struct uwb_beca_e *__uwb_beca_add(struct uwb_rc_evt_beacon *be, + struct uwb_beacon_frame *bf, + unsigned long ts_jiffies) +{ + struct uwb_beca_e *bce; + + bce = kzalloc(sizeof(*bce), GFP_KERNEL); + if (bce == NULL) + return NULL; + uwb_beca_e_init(bce); + bce->ts_jiffies = ts_jiffies; + bce->uwb_dev = NULL; + list_add(&bce->node, &uwb_beca.list); + return bce; +} + +/* + * Wipe out beacon entries that became stale + * + * Remove associated devicest too. + */ +void uwb_beca_purge(void) +{ + struct uwb_beca_e *bce, *next; + unsigned long now = jiffies; + mutex_lock(&uwb_beca.mutex); + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + if (now - bce->ts_jiffies + > msecs_to_jiffies(beacon_timeout_ms)) { + uwbd_dev_offair(bce); + list_del(&bce->node); + uwb_bce_put(bce); + } + } + mutex_unlock(&uwb_beca.mutex); +} + +/* Clean up the whole beacon cache. Called on shutdown */ +void uwb_beca_release(void) +{ + struct uwb_beca_e *bce, *next; + mutex_lock(&uwb_beca.mutex); + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + list_del(&bce->node); + uwb_bce_put(bce); + } + mutex_unlock(&uwb_beca.mutex); +} + +static void uwb_beacon_print(struct uwb_rc *rc, struct uwb_rc_evt_beacon *be, + struct uwb_beacon_frame *bf) +{ + char macbuf[UWB_ADDR_STRSIZE]; + char devbuf[UWB_ADDR_STRSIZE]; + char dstbuf[UWB_ADDR_STRSIZE]; + + uwb_mac_addr_print(macbuf, sizeof(macbuf), &bf->Device_Identifier); + uwb_dev_addr_print(devbuf, sizeof(devbuf), &bf->hdr.SrcAddr); + uwb_dev_addr_print(dstbuf, sizeof(dstbuf), &bf->hdr.DestAddr); + dev_info(&rc->uwb_dev.dev, + "BEACON from %s to %s (ch%u offset %u slot %u MAC %s)\n", + devbuf, dstbuf, be->bChannelNumber, be->wBPSTOffset, + bf->Beacon_Slot_Number, macbuf); +} + +/* + * @bce: beacon cache entry, referenced + */ +ssize_t uwb_bce_print_IEs(struct uwb_dev *uwb_dev, struct uwb_beca_e *bce, + char *buf, size_t size) +{ + ssize_t result = 0; + struct uwb_rc_evt_beacon *be; + struct uwb_beacon_frame *bf; + struct uwb_buf_ctx ctx = { + .buf = buf, + .bytes = 0, + .size = size + }; + + mutex_lock(&bce->mutex); + be = bce->be; + if (be == NULL) + goto out; + bf = (void *) be->BeaconInfo; + uwb_ie_for_each(uwb_dev, uwb_ie_dump_hex, &ctx, + bf->IEData, be->wBeaconInfoLength - sizeof(*bf)); + result = ctx.bytes; +out: + mutex_unlock(&bce->mutex); + return result; +} + +/* + * Verify that the beacon event, frame and IEs are ok + */ +static int uwb_verify_beacon(struct uwb_rc *rc, struct uwb_event *evt, + struct uwb_rc_evt_beacon *be) +{ + int result = -EINVAL; + struct uwb_beacon_frame *bf; + struct device *dev = &rc->uwb_dev.dev; + + /* Is there enough data to decode a beacon frame? */ + if (evt->notif.size < sizeof(*be) + sizeof(*bf)) { + dev_err(dev, "BEACON event: Not enough data to decode " + "(%zu vs %zu bytes needed)\n", evt->notif.size, + sizeof(*be) + sizeof(*bf)); + goto error; + } + /* FIXME: make sure beacon frame IEs are fine and that the whole thing + * is consistent */ + result = 0; +error: + return result; +} + +/* + * Handle UWB_RC_EVT_BEACON events + * + * We check the beacon cache to see how the received beacon fares. If + * is there already we refresh the timestamp. If not we create a new + * entry. + * + * According to the WHCI and WUSB specs, only one beacon frame is + * allowed per notification block, so we don't bother about scanning + * for more. + */ +int uwbd_evt_handle_rc_beacon(struct uwb_event *evt) +{ + int result = -EINVAL; + struct uwb_rc *rc; + struct uwb_rc_evt_beacon *be; + struct uwb_beacon_frame *bf; + struct uwb_beca_e *bce; + struct device *dev = &evt->rc->uwb_dev.dev; + unsigned long last_ts; + + rc = evt->rc; + be = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon, rceb); + result = uwb_verify_beacon(rc, evt, be); + if (result < 0) + return result; + + /* Ignore beacon if it is from an alien. */ + if (be->bBeaconType == UWB_RC_BEACON_TYPE_OL_ALIEN || + be->bBeaconType == UWB_RC_BEACON_TYPE_NOL_ALIEN) { + if (printk_ratelimit()) + dev_err(dev, "BEACON received from ALIEN. Action? \n"); + result = -ENOSYS; + return 0; + } + bf = (struct uwb_beacon_frame *) be->BeaconInfo; + + /* + * Drop beacons from devices with a NULL EUI-48 -- they cannot + * be uniquely identified. + * + * It's expected that these will all be WUSB devices and they + * have a WUSB specific connection method so ignoring them + * here shouldn't be a problem. + */ + if (uwb_mac_addr_bcast(&bf->Device_Identifier)) + return 0; + + mutex_lock(&uwb_beca.mutex); + bce = __uwb_beca_find_bymac(&bf->Device_Identifier); + if (bce == NULL) { + /* Not in there, a new device is pinging */ + uwb_beacon_print(evt->rc, be, bf); + bce = __uwb_beca_add(be, bf, evt->ts_jiffies); + if (bce == NULL) { + mutex_unlock(&uwb_beca.mutex); + return -ENOMEM; + } + } + mutex_unlock(&uwb_beca.mutex); + + mutex_lock(&bce->mutex); + /* purge old beacon data */ + kfree(bce->be); + + last_ts = bce->ts_jiffies; + + /* Update commonly used fields */ + bce->ts_jiffies = evt->ts_jiffies; + bce->be = be; + bce->dev_addr = bf->hdr.SrcAddr; + bce->mac_addr = &bf->Device_Identifier; + be->wBPSTOffset = le16_to_cpu(be->wBPSTOffset); + be->wBeaconInfoLength = le16_to_cpu(be->wBeaconInfoLength); + stats_add_sample(&bce->lqe_stats, be->bLQI - 7); + stats_add_sample(&bce->rssi_stats, be->bRSSI + 18); + + /* + * This might be a beacon from a new device. + */ + if (bce->uwb_dev == NULL) + uwbd_dev_onair(evt->rc, bce); + + mutex_unlock(&bce->mutex); + + return 1; /* we keep the event data */ +} + +/* + * Handle UWB_RC_EVT_BEACON_SIZE events + * + * XXXXX + */ +int uwbd_evt_handle_rc_beacon_size(struct uwb_event *evt) +{ + int result = -EINVAL; + struct device *dev = &evt->rc->uwb_dev.dev; + struct uwb_rc_evt_beacon_size *bs; + + /* Is there enough data to decode the event? */ + if (evt->notif.size < sizeof(*bs)) { + dev_err(dev, "BEACON SIZE notification: Not enough data to " + "decode (%zu vs %zu bytes needed)\n", + evt->notif.size, sizeof(*bs)); + goto error; + } + bs = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon_size, rceb); + if (0) + dev_info(dev, "Beacon size changed to %u bytes " + "(FIXME: action?)\n", le16_to_cpu(bs->wNewBeaconSize)); + else { + /* temporary hack until we do something with this message... */ + static unsigned count; + if (++count % 1000 == 0) + dev_info(dev, "Beacon size changed %u times " + "(FIXME: action?)\n", count); + } + result = 0; +error: + return result; +} + +/** + * uwbd_evt_handle_rc_bp_slot_change - handle a BP_SLOT_CHANGE event + * @evt: the BP_SLOT_CHANGE notification from the radio controller + * + * If the event indicates that no beacon period slots were available + * then radio controller has transitioned to a non-beaconing state. + * Otherwise, simply save the current beacon slot. + */ +int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *evt) +{ + struct uwb_rc *rc = evt->rc; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_evt_bp_slot_change *bpsc; + + if (evt->notif.size < sizeof(*bpsc)) { + dev_err(dev, "BP SLOT CHANGE event: Not enough data\n"); + return -EINVAL; + } + bpsc = container_of(evt->notif.rceb, struct uwb_rc_evt_bp_slot_change, rceb); + + mutex_lock(&rc->uwb_dev.mutex); + if (uwb_rc_evt_bp_slot_change_no_slot(bpsc)) { + dev_info(dev, "stopped beaconing: No free slots in BP\n"); + rc->beaconing = -1; + } else + rc->uwb_dev.beacon_slot = uwb_rc_evt_bp_slot_change_slot_num(bpsc); + mutex_unlock(&rc->uwb_dev.mutex); + + return 0; +} + +/** + * Handle UWB_RC_EVT_BPOIE_CHANGE events + * + * XXXXX + */ +struct uwb_ie_bpo { + struct uwb_ie_hdr hdr; + u8 bp_length; + u8 data[]; +} __attribute__((packed)); + +int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *evt) +{ + int result = -EINVAL; + struct device *dev = &evt->rc->uwb_dev.dev; + struct uwb_rc_evt_bpoie_change *bpoiec; + struct uwb_ie_bpo *bpoie; + static unsigned count; /* FIXME: this is a temp hack */ + size_t iesize; + + /* Is there enough data to decode it? */ + if (evt->notif.size < sizeof(*bpoiec)) { + dev_err(dev, "BPOIEC notification: Not enough data to " + "decode (%zu vs %zu bytes needed)\n", + evt->notif.size, sizeof(*bpoiec)); + goto error; + } + bpoiec = container_of(evt->notif.rceb, struct uwb_rc_evt_bpoie_change, rceb); + iesize = le16_to_cpu(bpoiec->wBPOIELength); + if (iesize < sizeof(*bpoie)) { + dev_err(dev, "BPOIEC notification: Not enough IE data to " + "decode (%zu vs %zu bytes needed)\n", + iesize, sizeof(*bpoie)); + goto error; + } + if (++count % 1000 == 0) /* Lame placeholder */ + dev_info(dev, "BPOIE: %u changes received\n", count); + /* + * FIXME: At this point we should go over all the IEs in the + * bpoiec->BPOIE array and act on each. + */ + result = 0; +error: + return result; +} + +/** + * uwb_bg_joined - is the RC in a beacon group? + * @rc: the radio controller + * + * Returns true if the radio controller is in a beacon group (even if + * it's the sole member). + */ +int uwb_bg_joined(struct uwb_rc *rc) +{ + return rc->beaconing != -1; +} +EXPORT_SYMBOL_GPL(uwb_bg_joined); + +/* + * Print beaconing state. + */ +static ssize_t uwb_rc_beacon_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + ssize_t result; + + mutex_lock(&rc->uwb_dev.mutex); + result = sprintf(buf, "%d\n", rc->beaconing); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* + * Start beaconing on the specified channel, or stop beaconing. + * + * The BPST offset of when to start searching for a beacon group to + * join may be specified. + */ +static ssize_t uwb_rc_beacon_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + int channel; + unsigned bpst_offset = 0; + ssize_t result = -EINVAL; + + result = sscanf(buf, "%d %u\n", &channel, &bpst_offset); + if (result >= 1) + result = uwb_rc_beacon(rc, channel, bpst_offset); + + return result < 0 ? result : size; +} +DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, uwb_rc_beacon_show, uwb_rc_beacon_store); diff --git a/drivers/uwb/ie.c b/drivers/uwb/ie.c new file mode 100644 index 0000000..d54fe09 --- /dev/null +++ b/drivers/uwb/ie.c @@ -0,0 +1,570 @@ +/* + * Ultra Wide Band + * Information Element Handling + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include "uwb-internal.h" +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** + * uwb_ie_next - get the next IE in a buffer + * @ptr: start of the buffer containing the IE data + * @len: length of the buffer + * + * Both @ptr and @len are updated so subsequent calls to uwb_ie_next() + * will get the next IE. + * + * NULL is returned (and @ptr and @len will not be updated) if there + * are no more IEs in the buffer or the buffer is too short. + */ +struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len) +{ + struct uwb_ie_hdr *hdr; + size_t ie_len; + + if (*len < sizeof(struct uwb_ie_hdr)) + return NULL; + + hdr = *ptr; + ie_len = sizeof(struct uwb_ie_hdr) + hdr->length; + + if (*len < ie_len) + return NULL; + + *ptr += ie_len; + *len -= ie_len; + + return hdr; +} +EXPORT_SYMBOL_GPL(uwb_ie_next); + +/** + * Get the IEs that a radio controller is sending in its beacon + * + * @uwb_rc: UWB Radio Controller + * @returns: Size read from the system + * + * We don't need to lock the uwb_rc's mutex because we don't modify + * anything. Once done with the iedata buffer, call + * uwb_rc_ie_release(iedata). Don't call kfree on it. + */ +ssize_t uwb_rc_get_ie(struct uwb_rc *uwb_rc, struct uwb_rc_evt_get_ie **pget_ie) +{ + ssize_t result; + struct device *dev = &uwb_rc->uwb_dev.dev; + struct uwb_rccb *cmd = NULL; + struct uwb_rceb *reply = NULL; + struct uwb_rc_evt_get_ie *get_ie; + + d_fnstart(3, dev, "(%p, %p)\n", uwb_rc, pget_ie); + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_GET_IE); + result = uwb_rc_vcmd(uwb_rc, "GET_IE", cmd, sizeof(*cmd), + UWB_RC_CET_GENERAL, UWB_RC_CMD_GET_IE, + &reply); + if (result < 0) + goto error_cmd; + get_ie = container_of(reply, struct uwb_rc_evt_get_ie, rceb); + if (result < sizeof(*get_ie)) { + dev_err(dev, "not enough data returned for decoding GET IE " + "(%zu bytes received vs %zu needed)\n", + result, sizeof(*get_ie)); + result = -EINVAL; + } else if (result < sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)) { + dev_err(dev, "not enough data returned for decoding GET IE " + "payload (%zu bytes received vs %zu needed)\n", result, + sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)); + result = -EINVAL; + } else + *pget_ie = get_ie; +error_cmd: + kfree(cmd); +error_kzalloc: + d_fnend(3, dev, "(%p, %p) = %d\n", uwb_rc, pget_ie, (int)result); + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_get_ie); + + +/* + * Given a pointer to an IE, print it in ASCII/hex followed by a new line + * + * @ie_hdr: pointer to the IE header. Length is in there, and it is + * guaranteed that the ie_hdr->length bytes following it are + * safely accesible. + * + * @_data: context data passed from uwb_ie_for_each(), an struct output_ctx + */ +int uwb_ie_dump_hex(struct uwb_dev *uwb_dev, const struct uwb_ie_hdr *ie_hdr, + size_t offset, void *_ctx) +{ + struct uwb_buf_ctx *ctx = _ctx; + const u8 *pl = (void *)(ie_hdr + 1); + u8 pl_itr; + + ctx->bytes += scnprintf(ctx->buf + ctx->bytes, ctx->size - ctx->bytes, + "%02x %02x ", (unsigned) ie_hdr->element_id, + (unsigned) ie_hdr->length); + pl_itr = 0; + while (pl_itr < ie_hdr->length && ctx->bytes < ctx->size) + ctx->bytes += scnprintf(ctx->buf + ctx->bytes, + ctx->size - ctx->bytes, + "%02x ", (unsigned) pl[pl_itr++]); + if (ctx->bytes < ctx->size) + ctx->buf[ctx->bytes++] = '\n'; + return 0; +} +EXPORT_SYMBOL_GPL(uwb_ie_dump_hex); + + +/** + * Verify that a pointer in a buffer points to valid IE + * + * @start: pointer to start of buffer in which IE appears + * @itr: pointer to IE inside buffer that will be verified + * @top: pointer to end of buffer + * + * @returns: 0 if IE is valid, <0 otherwise + * + * Verification involves checking that the buffer can contain a + * header and the amount of data reported in the IE header can be found in + * the buffer. + */ +static +int uwb_rc_ie_verify(struct uwb_dev *uwb_dev, const void *start, + const void *itr, const void *top) +{ + struct device *dev = &uwb_dev->dev; + const struct uwb_ie_hdr *ie_hdr; + + if (top - itr < sizeof(*ie_hdr)) { + dev_err(dev, "Bad IE: no data to decode header " + "(%zu bytes left vs %zu needed) at offset %zu\n", + top - itr, sizeof(*ie_hdr), itr - start); + return -EINVAL; + } + ie_hdr = itr; + itr += sizeof(*ie_hdr); + if (top - itr < ie_hdr->length) { + dev_err(dev, "Bad IE: not enough data for payload " + "(%zu bytes left vs %zu needed) at offset %zu\n", + top - itr, (size_t)ie_hdr->length, + (void *)ie_hdr - start); + return -EINVAL; + } + return 0; +} + + +/** + * Walk a buffer filled with consecutive IE's a buffer + * + * @uwb_dev: UWB device this IEs belong to (for err messages mainly) + * + * @fn: function to call with each IE; if it returns 0, we keep + * traversing the buffer. If it returns !0, we'll stop and return + * that value. + * + * @data: pointer passed to @fn + * + * @buf: buffer where the consecutive IEs are located + * + * @size: size of @buf + * + * Each IE is checked for basic correctness (there is space left for + * the header and the payload). If that test is failed, we stop + * processing. For every good IE, @fn is called. + */ +ssize_t uwb_ie_for_each(struct uwb_dev *uwb_dev, uwb_ie_f fn, void *data, + const void *buf, size_t size) +{ + ssize_t result = 0; + const struct uwb_ie_hdr *ie_hdr; + const void *itr = buf, *top = itr + size; + + while (itr < top) { + if (uwb_rc_ie_verify(uwb_dev, buf, itr, top) != 0) + break; + ie_hdr = itr; + itr += sizeof(*ie_hdr) + ie_hdr->length; + result = fn(uwb_dev, ie_hdr, itr - buf, data); + if (result != 0) + break; + } + return result; +} +EXPORT_SYMBOL_GPL(uwb_ie_for_each); + + +/** + * Replace all IEs currently being transmitted by a device + * + * @cmd: pointer to the SET-IE command with the IEs to set + * @size: size of @buf + */ +int uwb_rc_set_ie(struct uwb_rc *rc, struct uwb_rc_cmd_set_ie *cmd) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_evt_set_ie reply; + + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_SET_IE; + result = uwb_rc_cmd(rc, "SET-IE", &cmd->rccb, + sizeof(*cmd) + le16_to_cpu(cmd->wIELength), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + else if (result != sizeof(reply)) { + dev_err(dev, "SET-IE: not enough data to decode reply " + "(%d bytes received vs %zu needed)\n", + result, sizeof(reply)); + result = -EIO; + } else if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(dev, "SET-IE: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } else + result = 0; +error_cmd: + return result; +} + +/** + * Determine by IE id if IE is host settable + * WUSB 1.0 [8.6.2.8 Table 8.85] + * + * EXCEPTION: + * All but UWB_IE_WLP appears in Table 8.85 from WUSB 1.0. Setting this IE + * is required for the WLP substack to perform association with its WSS so + * we hope that the WUSB spec will be changed to reflect this. + */ +static +int uwb_rc_ie_is_host_settable(enum uwb_ie element_id) +{ + if (element_id == UWB_PCA_AVAILABILITY || + element_id == UWB_BP_SWITCH_IE || + element_id == UWB_MAC_CAPABILITIES_IE || + element_id == UWB_PHY_CAPABILITIES_IE || + element_id == UWB_APP_SPEC_PROBE_IE || + element_id == UWB_IDENTIFICATION_IE || + element_id == UWB_MASTER_KEY_ID_IE || + element_id == UWB_IE_WLP || + element_id == UWB_APP_SPEC_IE) + return 1; + return 0; +} + + +/** + * Extract Host Settable IEs from IE + * + * @ie_data: pointer to buffer containing all IEs + * @size: size of buffer + * + * @returns: length of buffer that only includes host settable IEs + * + * Given a buffer of IEs we move all Host Settable IEs to front of buffer + * by overwriting the IEs that are not Host Settable. + * Buffer length is adjusted accordingly. + */ +static +ssize_t uwb_rc_parse_host_settable_ie(struct uwb_dev *uwb_dev, + void *ie_data, size_t size) +{ + size_t new_len = size; + struct uwb_ie_hdr *ie_hdr; + size_t ie_length; + void *itr = ie_data, *top = itr + size; + + while (itr < top) { + if (uwb_rc_ie_verify(uwb_dev, ie_data, itr, top) != 0) + break; + ie_hdr = itr; + ie_length = sizeof(*ie_hdr) + ie_hdr->length; + if (uwb_rc_ie_is_host_settable(ie_hdr->element_id)) { + itr += ie_length; + } else { + memmove(itr, itr + ie_length, top - (itr + ie_length)); + new_len -= ie_length; + top -= ie_length; + } + } + return new_len; +} + + +/* Cleanup the whole IE management subsystem */ +void uwb_rc_ie_init(struct uwb_rc *uwb_rc) +{ + mutex_init(&uwb_rc->ies_mutex); +} + + +/** + * Set up cache for host settable IEs currently being transmitted + * + * First we just call GET-IE to get the current IEs being transmitted + * (or we workaround and pretend we did) and (because the format is + * the same) reuse that as the IE cache (with the command prefix, as + * explained in 'struct uwb_rc'). + * + * @returns: size of cache created + */ +ssize_t uwb_rc_ie_setup(struct uwb_rc *uwb_rc) +{ + struct device *dev = &uwb_rc->uwb_dev.dev; + ssize_t result; + size_t capacity; + struct uwb_rc_evt_get_ie *ie_info; + + d_fnstart(3, dev, "(%p)\n", uwb_rc); + mutex_lock(&uwb_rc->ies_mutex); + result = uwb_rc_get_ie(uwb_rc, &ie_info); + if (result < 0) + goto error_get_ie; + capacity = result; + d_printf(5, dev, "Got IEs %zu bytes (%zu long at %p)\n", result, + (size_t)le16_to_cpu(ie_info->wIELength), ie_info); + + /* Remove IEs that host should not set. */ + result = uwb_rc_parse_host_settable_ie(&uwb_rc->uwb_dev, + ie_info->IEData, le16_to_cpu(ie_info->wIELength)); + if (result < 0) + goto error_parse; + d_printf(5, dev, "purged non-settable IEs to %zu bytes\n", result); + uwb_rc->ies = (void *) ie_info; + uwb_rc->ies->rccb.bCommandType = UWB_RC_CET_GENERAL; + uwb_rc->ies->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_IE); + uwb_rc->ies_capacity = capacity; + d_printf(5, dev, "IE cache at %p %zu bytes, %zu capacity\n", + ie_info, result, capacity); + result = 0; +error_parse: +error_get_ie: + mutex_unlock(&uwb_rc->ies_mutex); + d_fnend(3, dev, "(%p) = %zu\n", uwb_rc, result); + return result; +} + + +/* Cleanup the whole IE management subsystem */ +void uwb_rc_ie_release(struct uwb_rc *uwb_rc) +{ + kfree(uwb_rc->ies); + uwb_rc->ies = NULL; + uwb_rc->ies_capacity = 0; +} + + +static +int __acc_size(struct uwb_dev *uwb_dev, const struct uwb_ie_hdr *ie_hdr, + size_t offset, void *_ctx) +{ + size_t *acc_size = _ctx; + *acc_size += sizeof(*ie_hdr) + ie_hdr->length; + d_printf(6, &uwb_dev->dev, "new acc size %zu\n", *acc_size); + return 0; +} + + +/** + * Add a new IE to IEs currently being transmitted by device + * + * @ies: the buffer containing the new IE or IEs to be added to + * the device's beacon. The buffer will be verified for + * consistence (meaning the headers should be right) and + * consistent with the buffer size. + * @size: size of @ies (in bytes, total buffer size) + * @returns: 0 if ok, <0 errno code on error + * + * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB + * after the device sent the first beacon that includes the IEs specified + * in the SET IE command. We thus cannot send this command if the device is + * not beaconing. Instead, a SET IE command will be sent later right after + * we start beaconing. + * + * Setting an IE on the device will overwrite all current IEs in device. So + * we take the current IEs being transmitted by the device, append the + * new one, and call SET IE with all the IEs needed. + * + * The local IE cache will only be updated with the new IE if SET IE + * completed successfully. + */ +int uwb_rc_ie_add(struct uwb_rc *uwb_rc, + const struct uwb_ie_hdr *ies, size_t size) +{ + int result = 0; + struct device *dev = &uwb_rc->uwb_dev.dev; + struct uwb_rc_cmd_set_ie *new_ies; + size_t ies_size, total_size, acc_size = 0; + + if (uwb_rc->ies == NULL) + return -ESHUTDOWN; + uwb_ie_for_each(&uwb_rc->uwb_dev, __acc_size, &acc_size, ies, size); + if (acc_size != size) { + dev_err(dev, "BUG: bad IEs, misconstructed headers " + "[%zu bytes reported vs %zu calculated]\n", + size, acc_size); + WARN_ON(1); + return -EINVAL; + } + mutex_lock(&uwb_rc->ies_mutex); + ies_size = le16_to_cpu(uwb_rc->ies->wIELength); + total_size = sizeof(*uwb_rc->ies) + ies_size; + if (total_size + size > uwb_rc->ies_capacity) { + d_printf(4, dev, "Reallocating IE cache from %p capacity %zu " + "to capacity %zu\n", uwb_rc->ies, uwb_rc->ies_capacity, + total_size + size); + new_ies = kzalloc(total_size + size, GFP_KERNEL); + if (new_ies == NULL) { + dev_err(dev, "No memory for adding new IE\n"); + result = -ENOMEM; + goto error_alloc; + } + memcpy(new_ies, uwb_rc->ies, total_size); + uwb_rc->ies_capacity = total_size + size; + kfree(uwb_rc->ies); + uwb_rc->ies = new_ies; + d_printf(4, dev, "New IE cache at %p capacity %zu\n", + uwb_rc->ies, uwb_rc->ies_capacity); + } + memcpy((void *)uwb_rc->ies + total_size, ies, size); + uwb_rc->ies->wIELength = cpu_to_le16(ies_size + size); + if (uwb_rc->beaconing != -1) { + result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies); + if (result < 0) { + dev_err(dev, "Cannot set new IE on device: %d\n", + result); + uwb_rc->ies->wIELength = cpu_to_le16(ies_size); + } else + result = 0; + } + d_printf(4, dev, "IEs now occupy %hu bytes of %zu capacity at %p\n", + le16_to_cpu(uwb_rc->ies->wIELength), uwb_rc->ies_capacity, + uwb_rc->ies); +error_alloc: + mutex_unlock(&uwb_rc->ies_mutex); + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_ie_add); + + +/* + * Remove an IE from internal cache + * + * We are dealing with our internal IE cache so no need to verify that the + * IEs are valid (it has been done already). + * + * Should be called with ies_mutex held + * + * We do not break out once an IE is found in the cache. It is currently + * possible to have more than one IE with the same ID included in the + * beacon. We don't reallocate, we just mark the size smaller. + */ +static +int uwb_rc_ie_cache_rm(struct uwb_rc *uwb_rc, enum uwb_ie to_remove) +{ + struct uwb_ie_hdr *ie_hdr; + size_t new_len = le16_to_cpu(uwb_rc->ies->wIELength); + void *itr = uwb_rc->ies->IEData; + void *top = itr + new_len; + + while (itr < top) { + ie_hdr = itr; + if (ie_hdr->element_id != to_remove) { + itr += sizeof(*ie_hdr) + ie_hdr->length; + } else { + int ie_length; + ie_length = sizeof(*ie_hdr) + ie_hdr->length; + if (top - itr != ie_length) + memmove(itr, itr + ie_length, top - itr + ie_length); + top -= ie_length; + new_len -= ie_length; + } + } + uwb_rc->ies->wIELength = cpu_to_le16(new_len); + return 0; +} + + +/** + * Remove an IE currently being transmitted by device + * + * @element_id: id of IE to be removed from device's beacon + */ +int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id) +{ + struct device *dev = &uwb_rc->uwb_dev.dev; + int result; + + if (uwb_rc->ies == NULL) + return -ESHUTDOWN; + mutex_lock(&uwb_rc->ies_mutex); + result = uwb_rc_ie_cache_rm(uwb_rc, element_id); + if (result < 0) + dev_err(dev, "Cannot remove IE from cache.\n"); + if (uwb_rc->beaconing != -1) { + result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies); + if (result < 0) + dev_err(dev, "Cannot set new IE on device.\n"); + } + mutex_unlock(&uwb_rc->ies_mutex); + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_ie_rm); + + +/** + * Create and set new Identification IE + * + * Currently only sets the Vendor ID. The Vendor ID is set from the OUI, + * which is obtained from the first three bytes from the MAC address. + */ +int uwb_rc_set_identification_ie(struct uwb_rc *uwb_rc) +{ + struct { + struct uwb_identification_ie id_ie; + struct uwb_dev_info dev_info; + struct uwb_vendor_id vendor_id; + } ie_data; + + ie_data.id_ie.hdr.element_id = UWB_IDENTIFICATION_IE; + ie_data.id_ie.hdr.length = sizeof(struct uwb_dev_info) + + sizeof(struct uwb_vendor_id); + + ie_data.dev_info.type = UWB_DEV_INFO_VENDOR_ID; + ie_data.dev_info.length = sizeof(struct uwb_vendor_id); + + ie_data.vendor_id.data[0] = uwb_rc->uwb_dev.mac_addr.data[0]; + ie_data.vendor_id.data[1] = uwb_rc->uwb_dev.mac_addr.data[1]; + ie_data.vendor_id.data[2] = uwb_rc->uwb_dev.mac_addr.data[2]; + + return uwb_rc_ie_add(uwb_rc, &ie_data.id_ie.hdr, sizeof(ie_data)); +} diff --git a/drivers/uwb/scan.c b/drivers/uwb/scan.c new file mode 100644 index 0000000..2d27074 --- /dev/null +++ b/drivers/uwb/scan.c @@ -0,0 +1,133 @@ +/* + * Ultra Wide Band + * Scanning management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * + * FIXME: docs + * FIXME: there are issues here on how BEACON and SCAN on USB RCI deal + * with each other. Currently seems that START_BEACON while + * SCAN_ONLY will cancel the scan, so we need to update the + * state here. Clarification request sent by email on + * 10/05/2005. + * 10/28/2005 No clear answer heard--maybe we'll hack the API + * so that when we start beaconing, if the HC is + * scanning in a mode not compatible with beaconing + * we just fail. + */ + +#include <linux/device.h> +#include <linux/err.h> +#include "uwb-internal.h" + + +/** + * Start/stop scanning in a radio controller + * + * @rc: UWB Radio Controlller + * @channel: Channel to scan; encodings in WUSB1.0[Table 5.12] + * @type: Type of scanning to do. + * @bpst_offset: value at which to start scanning (if type == + * UWB_SCAN_ONLY_STARTTIME) + * @returns: 0 if ok, < 0 errno code on error + * + * We put the command on kmalloc'ed memory as some arches cannot do + * USB from the stack. The reply event is copied from an stage buffer, + * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. + */ +int uwb_rc_scan(struct uwb_rc *rc, + unsigned channel, enum uwb_scan_type type, + unsigned bpst_offset) +{ + int result; + struct uwb_rc_cmd_scan *cmd; + struct uwb_rc_evt_confirm reply; + + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + mutex_lock(&rc->uwb_dev.mutex); + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SCAN); + cmd->bChannelNumber = channel; + cmd->bScanState = type; + cmd->wStartTime = cpu_to_le16(bpst_offset); + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_SCAN; + result = uwb_rc_cmd(rc, "SCAN", &cmd->rccb, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "SCAN: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + goto error_cmd; + } + rc->scanning = channel; + rc->scan_type = type; +error_cmd: + mutex_unlock(&rc->uwb_dev.mutex); + kfree(cmd); +error_kzalloc: + return result; +} + +/* + * Print scanning state + */ +static ssize_t uwb_rc_scan_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + ssize_t result; + + mutex_lock(&rc->uwb_dev.mutex); + result = sprintf(buf, "%d %d\n", rc->scanning, rc->scan_type); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* + * + */ +static ssize_t uwb_rc_scan_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + unsigned channel; + unsigned type; + unsigned bpst_offset = 0; + ssize_t result = -EINVAL; + + result = sscanf(buf, "%u %u %u\n", &channel, &type, &bpst_offset); + if (result >= 2 && type < UWB_SCAN_TOP) + result = uwb_rc_scan(rc, channel, type, bpst_offset); + + return result < 0 ? result : size; +} + +/** Radio Control sysfs interface (declaration) */ +DEVICE_ATTR(scan, S_IRUGO | S_IWUSR, uwb_rc_scan_show, uwb_rc_scan_store); |
