summaryrefslogtreecommitdiffstats
path: root/drivers/uwb/i1480/dfu/phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/uwb/i1480/dfu/phy.c')
-rw-r--r--drivers/uwb/i1480/dfu/phy.c203
1 files changed, 203 insertions, 0 deletions
diff --git a/drivers/uwb/i1480/dfu/phy.c b/drivers/uwb/i1480/dfu/phy.c
new file mode 100644
index 0000000..3b1a87d
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/phy.c
@@ -0,0 +1,203 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * PHY parameters upload
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Code for uploading the PHY parameters to the PHY through the UWB
+ * Radio Control interface.
+ *
+ * We just send the data through the MPI interface using HWA-like
+ * commands and then reset the PHY to make sure it is ok.
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/usb/wusb.h>
+#include "i1480-dfu.h"
+
+
+/**
+ * Write a value array to an address of the MPI interface
+ *
+ * @i1480: Device descriptor
+ * @data: Data array to write
+ * @size: Size of the data array
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * The data array is organized into pairs:
+ *
+ * ADDRESS VALUE
+ *
+ * ADDRESS is BE 16 bit unsigned, VALUE 8 bit unsigned. Size thus has
+ * to be a multiple of three.
+ */
+static
+int i1480_mpi_write(struct i1480 *i1480, const void *data, size_t size)
+{
+ int result;
+ struct i1480_cmd_mpi_write *cmd = i1480->cmd_buf;
+ struct i1480_evt_confirm *reply = i1480->evt_buf;
+
+ BUG_ON(size > 480);
+ result = -ENOMEM;
+ cmd->rccb.bCommandType = i1480_CET_VS1;
+ cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_WRITE);
+ cmd->size = cpu_to_le16(size);
+ memcpy(cmd->data, data, size);
+ reply->rceb.bEventType = i1480_CET_VS1;
+ reply->rceb.wEvent = i1480_CMD_MPI_WRITE;
+ result = i1480_cmd(i1480, "MPI-WRITE", sizeof(*cmd) + size, sizeof(*reply));
+ if (result < 0)
+ goto out;
+ if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(i1480->dev, "MPI-WRITE: command execution failed: %d\n",
+ reply->bResultCode);
+ result = -EIO;
+ }
+out:
+ return result;
+}
+
+
+/**
+ * Read a value array to from an address of the MPI interface
+ *
+ * @i1480: Device descriptor
+ * @data: where to place the read array
+ * @srcaddr: Where to read from
+ * @size: Size of the data read array
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * The command data array is organized into pairs ADDR0 ADDR1..., and
+ * the returned data in ADDR0 VALUE0 ADDR1 VALUE1...
+ *
+ * We generate the command array to be a sequential read and then
+ * rearrange the result.
+ *
+ * We use the i1480->cmd_buf for the command, i1480->evt_buf for the reply.
+ *
+ * As the reply has to fit in 512 bytes (i1480->evt_buffer), the max amount
+ * of values we can read is (512 - sizeof(*reply)) / 3
+ */
+static
+int i1480_mpi_read(struct i1480 *i1480, u8 *data, u16 srcaddr, size_t size)
+{
+ int result;
+ struct i1480_cmd_mpi_read *cmd = i1480->cmd_buf;
+ struct i1480_evt_mpi_read *reply = i1480->evt_buf;
+ unsigned cnt;
+
+ memset(i1480->cmd_buf, 0x69, 512);
+ memset(i1480->evt_buf, 0x69, 512);
+
+ BUG_ON(size > (i1480->buf_size - sizeof(*reply)) / 3);
+ result = -ENOMEM;
+ cmd->rccb.bCommandType = i1480_CET_VS1;
+ cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_READ);
+ cmd->size = cpu_to_le16(3*size);
+ for (cnt = 0; cnt < size; cnt++) {
+ cmd->data[cnt].page = (srcaddr + cnt) >> 8;
+ cmd->data[cnt].offset = (srcaddr + cnt) & 0xff;
+ }
+ reply->rceb.bEventType = i1480_CET_VS1;
+ reply->rceb.wEvent = i1480_CMD_MPI_READ;
+ result = i1480_cmd(i1480, "MPI-READ", sizeof(*cmd) + 2*size,
+ sizeof(*reply) + 3*size);
+ if (result < 0)
+ goto out;
+ if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(i1480->dev, "MPI-READ: command execution failed: %d\n",
+ reply->bResultCode);
+ result = -EIO;
+ }
+ for (cnt = 0; cnt < size; cnt++) {
+ if (reply->data[cnt].page != (srcaddr + cnt) >> 8)
+ dev_err(i1480->dev, "MPI-READ: page inconsistency at "
+ "index %u: expected 0x%02x, got 0x%02x\n", cnt,
+ (srcaddr + cnt) >> 8, reply->data[cnt].page);
+ if (reply->data[cnt].offset != ((srcaddr + cnt) & 0x00ff))
+ dev_err(i1480->dev, "MPI-READ: offset inconsistency at "
+ "index %u: expected 0x%02x, got 0x%02x\n", cnt,
+ (srcaddr + cnt) & 0x00ff,
+ reply->data[cnt].offset);
+ data[cnt] = reply->data[cnt].value;
+ }
+ result = 0;
+out:
+ return result;
+}
+
+
+/**
+ * Upload a PHY firmware, wait for it to start
+ *
+ * @i1480: Device instance
+ * @fw_name: Name of the file that contains the firmware
+ *
+ * We assume the MAC fw is up and running. This means we can use the
+ * MPI interface to write the PHY firmware. Once done, we issue an
+ * MBOA Reset, which will force the MAC to reset and reinitialize the
+ * PHY. If that works, we are ready to go.
+ *
+ * Max packet size for the MPI write is 512, so the max buffer is 480
+ * (which gives us 160 byte triads of MSB, LSB and VAL for the data).
+ */
+int i1480_phy_fw_upload(struct i1480 *i1480)
+{
+ int result;
+ const struct firmware *fw;
+ const char *data_itr, *data_top;
+ const size_t MAX_BLK_SIZE = 480; /* 160 triads */
+ size_t data_size;
+ u8 phy_stat;
+
+ result = request_firmware(&fw, i1480->phy_fw_name, i1480->dev);
+ if (result < 0)
+ goto out;
+ /* Loop writing data in chunks as big as possible until done. */
+ for (data_itr = fw->data, data_top = data_itr + fw->size;
+ data_itr < data_top; data_itr += MAX_BLK_SIZE) {
+ data_size = min(MAX_BLK_SIZE, (size_t) (data_top - data_itr));
+ result = i1480_mpi_write(i1480, data_itr, data_size);
+ if (result < 0)
+ goto error_mpi_write;
+ }
+ /* Read MPI page 0, offset 6; if 0, PHY was initialized correctly. */
+ result = i1480_mpi_read(i1480, &phy_stat, 0x0006, 1);
+ if (result < 0) {
+ dev_err(i1480->dev, "PHY: can't get status: %d\n", result);
+ goto error_mpi_status;
+ }
+ if (phy_stat != 0) {
+ result = -ENODEV;
+ dev_info(i1480->dev, "error, PHY not ready: %u\n", phy_stat);
+ goto error_phy_status;
+ }
+ dev_info(i1480->dev, "PHY fw '%s': uploaded\n", i1480->phy_fw_name);
+error_phy_status:
+error_mpi_status:
+error_mpi_write:
+ release_firmware(fw);
+ if (result < 0)
+ dev_err(i1480->dev, "PHY fw '%s': failed to upload (%d), "
+ "power cycle device\n", i1480->phy_fw_name, result);
+out:
+ return result;
+}
OpenPOWER on IntegriCloud