diff options
Diffstat (limited to 'drivers/usb')
44 files changed, 365 insertions, 185 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index c691eea..f5ed3d7 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-$(CONFIG_USB) += phy/ +obj-$(CONFIG_USB_COMMON) += phy/ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index f2a120e..36a2a0b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -567,6 +567,14 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) usb_autopm_put_interface(acm->control); + /* + * Unthrottle device in case the TTY was closed while throttled. + */ + spin_lock_irq(&acm->read_lock); + acm->throttled = 0; + acm->throttle_req = 0; + spin_unlock_irq(&acm->read_lock); + if (acm_submit_read_urbs(acm, GFP_KERNEL)) goto error_submit_read_urbs; diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index ea8b304..8fd398d 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -55,6 +55,15 @@ static const struct usb_device_id wdm_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */ }, + { + /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */ + .match_flags = USB_DEVICE_ID_MATCH_VENDOR | + USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = HUAWEI_VENDOR_ID, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */ + }, { } }; diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 57ed9e4..622b4a4 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -493,15 +493,6 @@ static int hcd_pci_suspend_noirq(struct device *dev) pci_save_state(pci_dev); - /* - * Some systems crash if an EHCI controller is in D3 during - * a sleep transition. We have to leave such controllers in D0. - */ - if (hcd->broken_pci_sleep) { - dev_dbg(dev, "Staying in PCI D0\n"); - return retval; - } - /* If the root hub is dead rather than suspended, disallow remote * wakeup. usb_hc_died() should ensure that both hosts are marked as * dying, so we only need to check the primary roothub. diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 04fb834..25a7422 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3379,7 +3379,7 @@ int usb_disable_lpm(struct usb_device *udev) return 0; udev->lpm_disable_count++; - if ((udev->u1_params.timeout == 0 && udev->u1_params.timeout == 0)) + if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0)) return 0; /* If LPM is enabled, attempt to disable it. */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index b548cf1..bdd1c67 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1838,7 +1838,6 @@ free_interfaces: intfc = cp->intf_cache[i]; intf->altsetting = intfc->altsetting; intf->num_altsetting = intfc->num_altsetting; - intf->intf_assoc = find_iad(dev, cp, i); kref_get(&intfc->ref); alt = usb_altnum_to_altsetting(intf, 0); @@ -1851,6 +1850,8 @@ free_interfaces: if (!alt) alt = &intf->altsetting[0]; + intf->intf_assoc = + find_iad(dev, cp, alt->desc.bInterfaceNumber); intf->cur_altsetting = alt; usb_enable_interface(dev, intf, true); intf->dev.parent = &dev->dev; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 3df1a19..ec70df7 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1091,7 +1091,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, if (r == req) { /* wait until it is processed */ dwc3_stop_active_transfer(dwc, dep->number); - goto out0; + goto out1; } dev_err(dwc->dev, "request %p was not queued to %s\n", request, ep->name); @@ -1099,6 +1099,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, goto out0; } +out1: /* giveback the request */ dwc3_gadget_giveback(dep, req, -ECONNRESET); diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index e23bf79..9a9bced 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -599,12 +599,6 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) spin_lock_irqsave(&ep->udc->lock, flags); - if (ep->ep.desc) { - spin_unlock_irqrestore(&ep->udc->lock, flags); - DBG(DBG_ERR, "ep%d already enabled\n", ep->index); - return -EBUSY; - } - ep->ep.desc = desc; ep->ep.maxpacket = maxpacket; diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 51881f3..b09452d 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -1596,7 +1596,7 @@ static int qe_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct qe_ep, ep); /* catch various bogus parameters */ - if (!_ep || !desc || ep->ep.desc || _ep->name == ep_name[0] || + if (!_ep || !desc || _ep->name == ep_name[0] || (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h index 4c07ca9..7026919 100644 --- a/drivers/usb/gadget/fsl_qe_udc.h +++ b/drivers/usb/gadget/fsl_qe_udc.h @@ -153,10 +153,10 @@ struct usb_ep_para{ #define USB_BUSMODE_DTB 0x02 /* Endpoint basic handle */ -#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF) +#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF) #define ep_maxpacket(EP) ((EP)->ep.maxpacket) #define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ - USB_DIR_IN) : ((EP)->desc->bEndpointAddress \ + USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \ & USB_DIR_IN) == USB_DIR_IN) /* ep0 transfer state */ diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 2831685..bc6f9bb 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -567,7 +567,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct fsl_ep, ep); /* catch various bogus parameters */ - if (!_ep || !desc || ep->ep.desc + if (!_ep || !desc || (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; @@ -2575,7 +2575,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) /* for ep0: the desc defined here; * for other eps, gadget layer called ep_enable with defined desc */ - udc_controller->eps[0].desc = &fsl_ep0_desc; + udc_controller->eps[0].ep.desc = &fsl_ep0_desc; udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD; /* setup the udc->eps[] for non-control endpoints and link diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index 5cd7b7e..f61a967 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -568,10 +568,10 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length) /* * ### internal used help routines. */ -#define ep_index(EP) ((EP)->desc->bEndpointAddress&0xF) +#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress&0xF) #define ep_maxpacket(EP) ((EP)->ep.maxpacket) #define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ - USB_DIR_IN ):((EP)->desc->bEndpointAddress \ + USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \ & USB_DIR_IN)==USB_DIR_IN) #define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \ &udc->eps[pipe]) diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index b241e6c..3d28fb9 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -102,7 +102,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) unsigned long flags; ep = container_of(_ep, struct goku_ep, ep); - if (!_ep || !desc || ep->ep.desc + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; dev = ep->dev; diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index 262acfd..2ab0388 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -61,6 +61,7 @@ #include <mach/irqs.h> #include <mach/board.h> #ifdef CONFIG_USB_GADGET_DEBUG_FILES +#include <linux/debugfs.h> #include <linux/seq_file.h> #endif diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index dbcd132..117a4bb 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -464,7 +464,7 @@ static int mv_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct mv_ep, ep); udc = ep->udc; - if (!_ep || !desc || ep->ep.desc + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 7ba3246..a460e8c 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -153,7 +153,7 @@ static int omap_ep_enable(struct usb_ep *_ep, u16 maxp; /* catch various bogus parameters */ - if (!_ep || !desc || ep->ep.desc + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress || ep->maxpacket < usb_endpoint_maxp(desc)) { diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index d7c8cb3..f7ff9e8 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -218,7 +218,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, struct pxa25x_udc *dev; ep = container_of (_ep, struct pxa25x_ep, ep); - if (!_ep || !desc || ep->ep.desc || _ep->name == ep0name + if (!_ep || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress || ep->fifo_size < usb_endpoint_maxp (desc)) { diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 36c6836..236b271 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -760,7 +760,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, u32 ecr = 0; hsep = our_ep(_ep); - if (!_ep || !desc || hsep->ep.desc || _ep->name == ep0name + if (!_ep || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || hsep->bEndpointAddress != desc->bEndpointAddress || ep_maxpacket(hsep) < usb_endpoint_maxp(desc)) diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 3de71d3..f2e51f5 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1062,7 +1062,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, ep = to_s3c2410_ep(_ep); - if (!_ep || !desc || ep->ep.desc + if (!_ep || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b100f5f..800be38 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -671,7 +671,9 @@ static int ehci_init(struct usb_hcd *hcd) hw = ehci->async->hw; hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma); hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD); +#if defined(CONFIG_PPC_PS3) hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */ +#endif hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT); hw->hw_qtd_next = EHCI_LIST_END(ehci); ehci->async->qh_state = QH_STATE_LINKED; diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index a44294d..17cfb8a 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -43,6 +43,7 @@ #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> #include <linux/gpio.h> +#include <linux/clk.h> /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) @@ -55,6 +56,15 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 +/* Errata i693 */ +static struct clk *utmi_p1_fck; +static struct clk *utmi_p2_fck; +static struct clk *xclk60mhsp1_ck; +static struct clk *xclk60mhsp2_ck; +static struct clk *usbhost_p1_fck; +static struct clk *usbhost_p2_fck; +static struct clk *init_60m_fclk; + /*-------------------------------------------------------------------------*/ static const struct hc_driver ehci_omap_hc_driver; @@ -70,6 +80,41 @@ static inline u32 ehci_read(void __iomem *base, u32 reg) return __raw_readl(base + reg); } +/* Erratum i693 workaround sequence */ +static void omap_ehci_erratum_i693(struct ehci_hcd *ehci) +{ + int ret = 0; + + /* Switch to the internal 60 MHz clock */ + ret = clk_set_parent(utmi_p1_fck, init_60m_fclk); + if (ret != 0) + ehci_err(ehci, "init_60m_fclk set parent" + "failed error:%d\n", ret); + + ret = clk_set_parent(utmi_p2_fck, init_60m_fclk); + if (ret != 0) + ehci_err(ehci, "init_60m_fclk set parent" + "failed error:%d\n", ret); + + clk_enable(usbhost_p1_fck); + clk_enable(usbhost_p2_fck); + + /* Wait 1ms and switch back to the external clock */ + mdelay(1); + ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck); + if (ret != 0) + ehci_err(ehci, "xclk60mhsp1_ck set parent" + "failed error:%d\n", ret); + + ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck); + if (ret != 0) + ehci_err(ehci, "xclk60mhsp2_ck set parent" + "failed error:%d\n", ret); + + clk_disable(usbhost_p1_fck); + clk_disable(usbhost_p2_fck); +} + static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) { struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); @@ -100,6 +145,50 @@ static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) } } +static int omap_ehci_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 __iomem *status_reg = &ehci->regs->port_status[ + (wIndex & 0xff) - 1]; + u32 temp; + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&ehci->lock, flags); + + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { + retval = -EPIPE; + goto done; + } + + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + + omap_ehci_erratum_i693(ehci); + + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); + goto done; + } + + spin_unlock_irqrestore(&ehci->lock, flags); + + /* Handle the hub control events here */ + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +done: + spin_unlock_irqrestore(&ehci->lock, flags); + return retval; +} + static void disable_put_regulator( struct ehci_hcd_omap_platform_data *pdata) { @@ -264,8 +353,76 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* root ports should always stay powered */ ehci_port_power(omap_ehci, 1); + /* get clocks */ + utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); + if (IS_ERR(utmi_p1_fck)) { + ret = PTR_ERR(utmi_p1_fck); + dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); + goto err_add_hcd; + } + + xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); + if (IS_ERR(xclk60mhsp1_ck)) { + ret = PTR_ERR(xclk60mhsp1_ck); + dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); + goto err_utmi_p1_fck; + } + + utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); + if (IS_ERR(utmi_p2_fck)) { + ret = PTR_ERR(utmi_p2_fck); + dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); + goto err_xclk60mhsp1_ck; + } + + xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); + if (IS_ERR(xclk60mhsp2_ck)) { + ret = PTR_ERR(xclk60mhsp2_ck); + dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); + goto err_utmi_p2_fck; + } + + usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); + if (IS_ERR(usbhost_p1_fck)) { + ret = PTR_ERR(usbhost_p1_fck); + dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); + goto err_xclk60mhsp2_ck; + } + + usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); + if (IS_ERR(usbhost_p2_fck)) { + ret = PTR_ERR(usbhost_p2_fck); + dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); + goto err_usbhost_p1_fck; + } + + init_60m_fclk = clk_get(dev, "init_60m_fclk"); + if (IS_ERR(init_60m_fclk)) { + ret = PTR_ERR(init_60m_fclk); + dev_err(dev, "init_60m_fclk failed error:%d\n", ret); + goto err_usbhost_p2_fck; + } + return 0; +err_usbhost_p2_fck: + clk_put(usbhost_p2_fck); + +err_usbhost_p1_fck: + clk_put(usbhost_p1_fck); + +err_xclk60mhsp2_ck: + clk_put(xclk60mhsp2_ck); + +err_utmi_p2_fck: + clk_put(utmi_p2_fck); + +err_xclk60mhsp1_ck: + clk_put(xclk60mhsp1_ck); + +err_utmi_p1_fck: + clk_put(utmi_p1_fck); + err_add_hcd: disable_put_regulator(pdata); pm_runtime_put_sync(dev); @@ -294,6 +451,15 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) disable_put_regulator(dev->platform_data); iounmap(hcd->regs); usb_put_hcd(hcd); + + clk_put(utmi_p1_fck); + clk_put(utmi_p2_fck); + clk_put(xclk60mhsp1_ck); + clk_put(xclk60mhsp2_ck); + clk_put(usbhost_p1_fck); + clk_put(usbhost_p2_fck); + clk_put(init_60m_fclk); + pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -364,7 +530,7 @@ static const struct hc_driver ehci_omap_hc_driver = { * root hub support */ .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, + .hub_control = omap_ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bc94d7b..1234817 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -144,14 +144,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) hcd->has_tt = 1; tdi_reset(ehci); } - if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) { - /* EHCI #1 or #2 on 6 Series/C200 Series chipset */ - if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) { - ehci_info(ehci, "broken D3 during system sleep on ASUS\n"); - hcd->broken_pci_sleep = 1; - device_set_wakeup_capable(&pdev->dev, false); - } - } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index ca819cd..e7cb392 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -126,8 +126,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) goto fail_create_hcd; } - if (pdev->dev.platform_data != NULL) - pdata = pdev->dev.platform_data; + pdata = pdev->dev.platform_data; /* initialize hcd */ hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev, diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index 9c2cc46..e9713d5 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -270,14 +270,12 @@ static int ehci_hcd_xilinx_of_remove(struct platform_device *op) * * Properly shutdown the hcd, call driver's shutdown routine. */ -static int ehci_hcd_xilinx_of_shutdown(struct platform_device *op) +static void ehci_hcd_xilinx_of_shutdown(struct platform_device *op) { struct usb_hcd *hcd = dev_get_drvdata(&op->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); - - return 0; } diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 836772d..2f3619e 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -317,7 +317,7 @@ static int ohci_bus_resume (struct usb_hcd *hcd) } /* Carry out the final steps of resuming the controller device */ -static void ohci_finish_controller_resume(struct usb_hcd *hcd) +static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int port; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index ec4338e..77689bd 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -793,10 +793,9 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, int slot_id) { - struct list_head *tt; struct list_head *tt_list_head; - struct list_head *tt_next; - struct xhci_tt_bw_info *tt_info; + struct xhci_tt_bw_info *tt_info, *next; + bool slot_found = false; /* If the device never made it past the Set Address stage, * it may not have the real_port set correctly. @@ -808,34 +807,16 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci, } tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts); - if (list_empty(tt_list_head)) - return; - - list_for_each(tt, tt_list_head) { - tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list); - if (tt_info->slot_id == slot_id) + list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) { + /* Multi-TT hubs will have more than one entry */ + if (tt_info->slot_id == slot_id) { + slot_found = true; + list_del(&tt_info->tt_list); + kfree(tt_info); + } else if (slot_found) { break; + } } - /* Cautionary measure in case the hub was disconnected before we - * stored the TT information. - */ - if (tt_info->slot_id != slot_id) - return; - - tt_next = tt->next; - tt_info = list_entry(tt, struct xhci_tt_bw_info, - tt_list); - /* Multi-TT hubs will have more than one entry */ - do { - list_del(tt); - kfree(tt_info); - tt = tt_next; - if (list_empty(tt_list_head)) - break; - tt_next = tt->next; - tt_info = list_entry(tt, struct xhci_tt_bw_info, - tt_list); - } while (tt_info->slot_id == slot_id); } int xhci_alloc_tt_info(struct xhci_hcd *xhci, @@ -1791,17 +1772,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); struct dev_info *dev_info, *next; - struct list_head *tt_list_head; - struct list_head *tt; - struct list_head *endpoints; - struct list_head *ep, *q; - struct xhci_tt_bw_info *tt_info; - struct xhci_interval_bw_table *bwt; - struct xhci_virt_ep *virt_ep; - unsigned long flags; int size; - int i; + int i, j, num_ports; /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); @@ -1860,21 +1833,22 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } spin_unlock_irqrestore(&xhci->lock, flags); - bwt = &xhci->rh_bw->bw_table; - for (i = 0; i < XHCI_MAX_INTERVAL; i++) { - endpoints = &bwt->interval_bw[i].endpoints; - list_for_each_safe(ep, q, endpoints) { - virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list); - list_del(&virt_ep->bw_endpoint_list); - kfree(virt_ep); + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); + for (i = 0; i < num_ports; i++) { + struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; + for (j = 0; j < XHCI_MAX_INTERVAL; j++) { + struct list_head *ep = &bwt->interval_bw[j].endpoints; + while (!list_empty(ep)) + list_del_init(ep->next); } } - tt_list_head = &xhci->rh_bw->tts; - list_for_each_safe(tt, q, tt_list_head) { - tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list); - list_del(tt); - kfree(tt_info); + for (i = 0; i < num_ports; i++) { + struct xhci_tt_bw_info *tt, *n; + list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) { + list_del(&tt->tt_list); + kfree(tt); + } } xhci->num_usb2_ports = 0; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index afdc73e..a979cd0 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -795,8 +795,8 @@ int xhci_suspend(struct xhci_hcd *xhci) command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_CSS; xhci_writel(xhci, command, &xhci->op_regs->command); - if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) { - xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n"); + if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) { + xhci_warn(xhci, "WARN: xHC save state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } @@ -848,8 +848,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command |= CMD_CRS; xhci_writel(xhci, command, &xhci->op_regs->command); if (handshake(xhci, &xhci->op_regs->status, - STS_RESTORE, 0, 10*100)) { - xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n"); + STS_RESTORE, 0, 10 * 1000)) { + xhci_warn(xhci, "WARN: xHC restore state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } @@ -3906,7 +3906,7 @@ static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev, default: dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n", __func__); - return -EINVAL; + return USB3_LPM_DISABLED; } if (sel <= max_sel_pel && pel <= max_sel_pel) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 768b4b5..9d63ba4 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -34,6 +34,7 @@ #include <linux/dma-mapping.h> #include <mach/cputype.h> +#include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h index 046c844..371baa0 100644 --- a/drivers/usb/musb/davinci.h +++ b/drivers/usb/musb/davinci.h @@ -15,7 +15,7 @@ */ /* Integrated highspeed/otg PHY */ -#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34) +#define USBPHY_CTL_PADDR 0x01c40034 #define USBPHY_DATAPOL BIT(11) /* (dm355) switch D+/D- */ #define USBPHY_PHYCLKGD BIT(8) #define USBPHY_SESNDEN BIT(7) /* v(sess_end) comparator */ @@ -27,7 +27,7 @@ #define USBPHY_OTGPDWN BIT(1) #define USBPHY_PHYPDWN BIT(0) -#define DM355_DEEPSLEEP_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x48) +#define DM355_DEEPSLEEP_PADDR 0x01c40048 #define DRVVBUS_FORCE BIT(2) #define DRVVBUS_OVERRIDE BIT(1) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index f42c29b..95918da 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1232,6 +1232,7 @@ static int musb_gadget_disable(struct usb_ep *ep) } musb_ep->desc = NULL; + musb_ep->end_point.desc = NULL; /* abort all pending DMA and requests */ nuke(musb_ep, -ESHUTDOWN); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index ef8d744..e090c79 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -375,11 +375,21 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, */ if (list_empty(&qh->hep->urb_list)) { struct list_head *head; + struct dma_controller *dma = musb->dma_controller; - if (is_in) + if (is_in) { ep->rx_reinit = 1; - else + if (ep->rx_channel) { + dma->channel_release(ep->rx_channel); + ep->rx_channel = NULL; + } + } else { ep->tx_reinit = 1; + if (ep->tx_channel) { + dma->channel_release(ep->tx_channel); + ep->tx_channel = NULL; + } + } /* Clobber old pointers to this qh */ musb_ep_set_qh(ep, is_in, NULL); diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index d2a9a8e..0eabb04 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -305,9 +305,8 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) regulator_enable(twl->usb3v3); twl->asleep = 1; - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, - 0x10); + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR); + twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); status = USB_EVENT_ID; otg->default_a = true; twl->phy.state = OTG_STATE_A_IDLE; @@ -316,12 +315,10 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) atomic_notifier_call_chain(&twl->phy.notifier, status, otg->gadget); } else { - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, - 0x10); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, - 0x1); + twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); } - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status); + twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR); return IRQ_HANDLED; } @@ -343,7 +340,7 @@ static int twl6030_enable_irq(struct usb_phy *x) { struct twl6030_usb *twl = phy_to_twl(x); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1); + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 3cfabcb..e7cf84f 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -2,11 +2,11 @@ # Physical Layer USB driver configuration # comment "USB Physical Layer drivers" - depends on USB + depends on USB || USB_GADGET config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" - depends on USB + depends on USB || USB_GADGET depends on I2C help Say Y here to add support for the NXP ISP1301 USB transceiver driver. diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 1b19262..1e71079 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -82,6 +82,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ + { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ @@ -92,6 +93,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ + { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ @@ -133,7 +135,13 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ + { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */ + { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ + { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */ + { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */ + { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */ + { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */ { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */ @@ -145,7 +153,11 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ + { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ + { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ + { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ + { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ { } /* Terminating Entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8c084ea..bc912e5 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -737,6 +737,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) }, { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index f3c7c78..5661c7e 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -784,6 +784,7 @@ #define RTSYSTEMS_VID 0x2100 /* Vendor ID */ #define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */ #define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */ +#define RTSYSTEMS_RTS01_PID 0x9e57 /* USB-RTS01 Radio Cable */ /* diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 105a6d8..9b026bf 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -39,13 +39,6 @@ MODULE_PARM_DESC(product, "User specified USB idProduct"); static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ -/* we want to look at all devices, as the vendor/product id can change - * depending on the command line argument */ -static const struct usb_device_id generic_serial_ids[] = { - {.driver_info = 42}, - {} -}; - /* All of the device info needed for the Generic Serial Converter */ struct usb_serial_driver usb_serial_generic_device = { .driver = { @@ -79,7 +72,8 @@ int usb_serial_generic_register(int _debug) USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT; /* register our generic driver with ourselves */ - retval = usb_serial_register_drivers(serial_drivers, "usbserial_generic", generic_serial_ids); + retval = usb_serial_register_drivers(serial_drivers, + "usbserial_generic", generic_device_ids); #endif return retval; } diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index d0ec1aa..a71fa0a 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -309,13 +309,16 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial, MCT_U232_SET_REQUEST_TYPE, 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE, WDR_TIMEOUT); - if (rc < 0) - dev_err(&serial->dev->dev, - "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); + kfree(buf); + dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr); - kfree(buf); - return rc; + if (rc < 0) { + dev_err(&serial->dev->dev, + "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); + return rc; + } + return 0; } /* mct_u232_set_modem_ctrl */ static int mct_u232_get_modem_stat(struct usb_serial *serial, diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 29160f8..57eca24 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -190,7 +190,7 @@ static int device_type; -static const struct usb_device_id id_table[] __devinitconst = { +static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)}, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 1aae902..adf8ce7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -47,6 +47,7 @@ /* Function prototypes */ static int option_probe(struct usb_serial *serial, const struct usb_device_id *id); +static void option_release(struct usb_serial *serial); static int option_send_setup(struct usb_serial_port *port); static void option_instat_callback(struct urb *urb); @@ -150,6 +151,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_E14AC 0x14AC #define HUAWEI_PRODUCT_K3806 0x14AE #define HUAWEI_PRODUCT_K4605 0x14C6 +#define HUAWEI_PRODUCT_K5005 0x14C8 #define HUAWEI_PRODUCT_K3770 0x14C9 #define HUAWEI_PRODUCT_K3771 0x14CA #define HUAWEI_PRODUCT_K4510 0x14CB @@ -234,6 +236,7 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_G1 0xA001 #define NOVATELWIRELESS_PRODUCT_G1_M 0xA002 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 +#define NOVATELWIRELESS_PRODUCT_MC551 0xB001 /* AMOI PRODUCTS */ #define AMOI_VENDOR_ID 0x1614 @@ -425,7 +428,7 @@ static void option_instat_callback(struct urb *urb); #define SAMSUNG_VENDOR_ID 0x04e8 #define SAMSUNG_PRODUCT_GT_B3730 0x6889 -/* YUGA products www.yuga-info.com*/ +/* YUGA products www.yuga-info.com gavin.kx@qq.com */ #define YUGA_VENDOR_ID 0x257A #define YUGA_PRODUCT_CEM600 0x1601 #define YUGA_PRODUCT_CEM610 0x1602 @@ -442,6 +445,8 @@ static void option_instat_callback(struct urb *urb); #define YUGA_PRODUCT_CEU516 0x160C #define YUGA_PRODUCT_CEU528 0x160D #define YUGA_PRODUCT_CEU526 0x160F +#define YUGA_PRODUCT_CEU881 0x161F +#define YUGA_PRODUCT_CEU882 0x162F #define YUGA_PRODUCT_CWM600 0x2601 #define YUGA_PRODUCT_CWM610 0x2602 @@ -457,23 +462,26 @@ static void option_instat_callback(struct urb *urb); #define YUGA_PRODUCT_CWU518 0x260B #define YUGA_PRODUCT_CWU516 0x260C #define YUGA_PRODUCT_CWU528 0x260D +#define YUGA_PRODUCT_CWU581 0x260E #define YUGA_PRODUCT_CWU526 0x260F - -#define YUGA_PRODUCT_CLM600 0x2601 -#define YUGA_PRODUCT_CLM610 0x2602 -#define YUGA_PRODUCT_CLM500 0x2603 -#define YUGA_PRODUCT_CLM510 0x2604 -#define YUGA_PRODUCT_CLM800 0x2605 -#define YUGA_PRODUCT_CLM900 0x2606 - -#define YUGA_PRODUCT_CLU718 0x2607 -#define YUGA_PRODUCT_CLU716 0x2608 -#define YUGA_PRODUCT_CLU728 0x2609 -#define YUGA_PRODUCT_CLU726 0x260A -#define YUGA_PRODUCT_CLU518 0x260B -#define YUGA_PRODUCT_CLU516 0x260C -#define YUGA_PRODUCT_CLU528 0x260D -#define YUGA_PRODUCT_CLU526 0x260F +#define YUGA_PRODUCT_CWU582 0x261F +#define YUGA_PRODUCT_CWU583 0x262F + +#define YUGA_PRODUCT_CLM600 0x3601 +#define YUGA_PRODUCT_CLM610 0x3602 +#define YUGA_PRODUCT_CLM500 0x3603 +#define YUGA_PRODUCT_CLM510 0x3604 +#define YUGA_PRODUCT_CLM800 0x3605 +#define YUGA_PRODUCT_CLM900 0x3606 + +#define YUGA_PRODUCT_CLU718 0x3607 +#define YUGA_PRODUCT_CLU716 0x3608 +#define YUGA_PRODUCT_CLU728 0x3609 +#define YUGA_PRODUCT_CLU726 0x360A +#define YUGA_PRODUCT_CLU518 0x360B +#define YUGA_PRODUCT_CLU516 0x360C +#define YUGA_PRODUCT_CLU528 0x360D +#define YUGA_PRODUCT_CLU526 0x360F /* Viettel products */ #define VIETTEL_VENDOR_ID 0x2262 @@ -490,6 +498,10 @@ static void option_instat_callback(struct urb *urb); /* MediaTek products */ #define MEDIATEK_VENDOR_ID 0x0e8d +/* Cellient products */ +#define CELLIENT_VENDOR_ID 0x2692 +#define CELLIENT_PRODUCT_MEN200 0x9005 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -666,6 +678,11 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, @@ -722,6 +739,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) }, + /* Novatel Ovation MC551 a.k.a. Verizon USB551L */ + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, @@ -1209,6 +1228,11 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) }, { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) }, { USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */ @@ -1216,6 +1240,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */ + { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); @@ -1245,7 +1270,7 @@ static struct usb_serial_driver option_1port_device = { .ioctl = usb_wwan_ioctl, .attach = usb_wwan_startup, .disconnect = usb_wwan_disconnect, - .release = usb_wwan_release, + .release = option_release, .read_int_callback = option_instat_callback, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, @@ -1259,35 +1284,6 @@ static struct usb_serial_driver * const serial_drivers[] = { static bool debug; -/* per port private data */ - -#define N_IN_URB 4 -#define N_OUT_URB 4 -#define IN_BUFLEN 4096 -#define OUT_BUFLEN 4096 - -struct option_port_private { - /* Input endpoints and buffer for this port */ - struct urb *in_urbs[N_IN_URB]; - u8 *in_buffer[N_IN_URB]; - /* Output endpoints and buffer for this port */ - struct urb *out_urbs[N_OUT_URB]; - u8 *out_buffer[N_OUT_URB]; - unsigned long out_busy; /* Bit vector of URBs in use */ - int opened; - struct usb_anchor delayed; - - /* Settings for the port */ - int rts_state; /* Handshaking pins (outputs) */ - int dtr_state; - int cts_state; /* Handshaking pins (inputs) */ - int dsr_state; - int dcd_state; - int ri_state; - - unsigned long tx_start_time[N_OUT_URB]; -}; - module_usb_serial_driver(serial_drivers, option_ids); static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason, @@ -1356,12 +1352,22 @@ static int option_probe(struct usb_serial *serial, return 0; } +static void option_release(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); + + usb_wwan_release(serial); + + kfree(priv); +} + static void option_instat_callback(struct urb *urb) { int err; int status = urb->status; struct usb_serial_port *port = urb->context; - struct option_port_private *portdata = usb_get_serial_port_data(port); + struct usb_wwan_port_private *portdata = + usb_get_serial_port_data(port); dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata); @@ -1421,7 +1427,7 @@ static int option_send_setup(struct usb_serial_port *port) struct usb_serial *serial = port->serial; struct usb_wwan_intf_private *intfdata = (struct usb_wwan_intf_private *) serial->private; - struct option_port_private *portdata; + struct usb_wwan_port_private *portdata; int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; int val = 0; diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 0d5fe59..996015c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -105,7 +105,13 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */ {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */ {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ + {USB_DEVICE(0x1199, 0x9010)}, /* Sierra Wireless Gobi 3000 QDL */ + {USB_DEVICE(0x1199, 0x9012)}, /* Sierra Wireless Gobi 3000 QDL */ {USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ + {USB_DEVICE(0x1199, 0x9014)}, /* Sierra Wireless Gobi 3000 QDL */ + {USB_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ + {USB_DEVICE(0x1199, 0x9018)}, /* Sierra Wireless Gobi 3000 QDL */ + {USB_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ { } /* Terminating entry */ diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ba54a0a..d423d36 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -294,6 +294,10 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + /* AT&T Direct IP LTE modems */ + { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF), + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 6a1b609..27483f9 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -659,12 +659,14 @@ exit: static struct usb_serial_driver *search_serial_device( struct usb_interface *iface) { - const struct usb_device_id *id; + const struct usb_device_id *id = NULL; struct usb_serial_driver *drv; + struct usb_driver *driver = to_usb_driver(iface->dev.driver); /* Check if the usb id matches a known device */ list_for_each_entry(drv, &usb_serial_driver_list, driver_list) { - id = get_iface_id(drv, iface); + if (drv->usb_driver == driver) + id = get_iface_id(drv, iface); if (id) return drv; } @@ -755,7 +757,7 @@ static int usb_serial_probe(struct usb_interface *interface, if (retval) { dbg("sub driver rejected device"); - kfree(serial); + usb_serial_put(serial); module_put(type->driver.owner); return retval; } @@ -827,7 +829,7 @@ static int usb_serial_probe(struct usb_interface *interface, */ if (num_bulk_in == 0 || num_bulk_out == 0) { dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n"); - kfree(serial); + usb_serial_put(serial); module_put(type->driver.owner); return -ENODEV; } @@ -841,7 +843,7 @@ static int usb_serial_probe(struct usb_interface *interface, if (num_ports == 0) { dev_err(&interface->dev, "Generic device with no bulk out, not allowed.\n"); - kfree(serial); + usb_serial_put(serial); module_put(type->driver.owner); return -EIO; } diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index a324a5d..11418da 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -202,6 +202,12 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_NO_READ_CAPACITY_16) sdev->no_read_capacity_16 = 1; + /* + * Many devices do not respond properly to READ_CAPACITY_16. + * Tell the SCSI layer to try READ_CAPACITY_10 first. + */ + sdev->try_rc_10_first = 1; + /* assume SPC3 or latter devices support sense size > 18 */ if (sdev->scsi_level > SCSI_SPC_2) us->fflags |= US_FL_SANE_SENSE; |
