diff options
Diffstat (limited to 'drivers/usb')
30 files changed, 186 insertions, 49 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 395a347..dac7676 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1530,6 +1530,8 @@ static const struct usb_device_id acm_ids[] = { { NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */ { NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */ { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */ + { NOKIA_PCSUITE_ACM_INFO(0x0335), }, /* Nokia E7 */ + { NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */ { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */ /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 79a58c3..90ae175 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -339,7 +339,8 @@ static int get_hub_status(struct usb_device *hdev, { int i, status = -ETIMEDOUT; - for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) { + for (i = 0; i < USB_STS_RETRIES && + (status == -ETIMEDOUT || status == -EPIPE); i++) { status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0, data, sizeof(*data), USB_STS_TIMEOUT); @@ -355,7 +356,8 @@ static int get_port_status(struct usb_device *hdev, int port1, { int i, status = -ETIMEDOUT; - for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) { + for (i = 0; i < USB_STS_RETRIES && + (status == -ETIMEDOUT || status == -EPIPE); i++) { status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1, data, sizeof(*data), USB_STS_TIMEOUT); diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 1b125c2..2278dad 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -389,7 +389,6 @@ static int usbfs_rmdir(struct inode *dir, struct dentry *dentry) mutex_unlock(&inode->i_mutex); if (!error) d_delete(dentry); - dput(dentry); return error; } diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 58456d1..029e288 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -632,13 +632,10 @@ config USB_DUMMY_HCD endchoice +# Selected by UDC drivers that support high-speed operation. config USB_GADGET_DUALSPEED bool depends on USB_GADGET - default n - help - Means that gadget drivers should include extra descriptors - and code to handle dual-speed controllers. # # USB Gadget Drivers diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 6e42aab..95e8138 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -60,6 +60,7 @@ #include <linux/device.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/prefetch.h> #include <asm/byteorder.h> #include <asm/system.h> diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 41dc093..f4690ff 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -38,6 +38,7 @@ #include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/prefetch.h> #include <asm/byteorder.h> #include <mach/hardware.h> diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 61ff927..d3dcabc 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1906,6 +1906,7 @@ static int dummy_hcd_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; the_controller = hcd_to_dummy (hcd); + hcd->has_tt = 1; retval = usb_add_hcd(hcd, 0, 0); if (retval != 0) { diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index a01383f..a56876a 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -431,8 +431,10 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* halt any endpoint by doing a "wrong direction" i/o call */ if (!usb_endpoint_dir_in(&data->desc)) { - if (usb_endpoint_xfer_isoc(&data->desc)) + if (usb_endpoint_xfer_isoc(&data->desc)) { + mutex_unlock(&data->lock); return -EINVAL; + } DBG (data->dev, "%s halt\n", data->name); spin_lock_irq (&data->dev->lock); if (likely (data->ep != NULL)) diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index b62b264..b1a8146 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -2083,7 +2083,7 @@ out: } #ifdef CONFIG_PM -static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state) +static int mv_udc_suspend(struct device *_dev) { struct mv_udc *udc = the_controller; @@ -2092,7 +2092,7 @@ static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state) return 0; } -static int mv_udc_resume(struct platform_device *_dev) +static int mv_udc_resume(struct device *_dev) { struct mv_udc *udc = the_controller; int retval; @@ -2100,7 +2100,7 @@ static int mv_udc_resume(struct platform_device *_dev) retval = mv_udc_phy_init(udc->phy_regs); if (retval) { dev_err(_dev, "phy initialization error %d\n", retval); - goto error; + return retval; } udc_reset(udc); ep0_reset(udc); @@ -2122,7 +2122,7 @@ static struct platform_driver udc_driver = { .owner = THIS_MODULE, .name = "pxa-u2o", #ifdef CONFIG_PM - .pm = mv_udc_pm_ops, + .pm = &mv_udc_pm_ops, #endif }, }; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 24696f7..476d88e 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -63,6 +63,7 @@ #include <linux/device.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/prefetch.h> #include <asm/byteorder.h> #include <asm/io.h> diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 365c02f..7745454 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2216,7 +2216,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", driver_name, LUBBOCK_USB_DISC_IRQ, retval); -lubbock_fail0: goto err_irq_lub; } retval = request_irq(LUBBOCK_USB_IRQ, @@ -2226,7 +2225,6 @@ lubbock_fail0: if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", driver_name, LUBBOCK_USB_IRQ, retval); - free_irq(LUBBOCK_USB_DISC_IRQ, dev); goto lubbock_fail0; } } else @@ -2236,10 +2234,11 @@ lubbock_fail0: return 0; #ifdef CONFIG_ARCH_LUBBOCK +lubbock_fail0: free_irq(LUBBOCK_USB_DISC_IRQ, dev); err_irq_lub: -#endif free_irq(irq, dev); +#endif err_irq1: if (gpio_is_valid(dev->mach->gpio_pullup)) gpio_free(dev->mach->gpio_pullup); diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index acb9cc4..0dfee28 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2680,9 +2680,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, writel(0, hsotg->regs + S3C_DAINTMSK); - dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + S3C_DIEPCTL0), + readl(hsotg->regs + S3C_DOEPCTL0)); /* enable in and out endpoint interrupts */ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt); @@ -2701,7 +2701,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, udelay(10); /* see openiboot */ __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); - dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); + dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); /* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by writing to the EPCTL register.. */ @@ -2721,9 +2721,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, s3c_hsotg_enqueue_setup(hsotg); - dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + S3C_DIEPCTL0), + readl(hsotg->regs + S3C_DOEPCTL0)); /* clear global NAKs */ writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK, @@ -2921,9 +2921,9 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) /* setup fifos */ - dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(hsotg->regs + S3C_GRXFSIZ), - readl(hsotg->regs + S3C_GNPTXFSIZ)); + dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", + readl(hsotg->regs + S3C_GRXFSIZ), + readl(hsotg->regs + S3C_GNPTXFSIZ)); s3c_hsotg_init_fifo(hsotg); @@ -2945,6 +2945,7 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) { +#ifdef DEBUG struct device *dev = hsotg->dev; void __iomem *regs = hsotg->regs; u32 val; @@ -2987,6 +2988,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n", readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE)); +#endif } diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index cfe3cf5..d5e3e1e 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -26,6 +26,7 @@ #include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/prefetch.h> #include <mach/regs-s3c2443-clock.h> #include <plat/udc.h> @@ -1301,7 +1302,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) hsudc->uclk = clk_get(&pdev->dev, "usb-device"); if (IS_ERR(hsudc->uclk)) { dev_err(dev, "failed to find usb-device clock source\n"); - return PTR_ERR(hsudc->uclk); + ret = PTR_ERR(hsudc->uclk); + goto err_clk; } clk_enable(hsudc->uclk); @@ -1310,7 +1312,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) disable_irq(hsudc->irq); local_irq_enable(); return 0; - +err_clk: + free_irq(hsudc->irq, hsudc); err_irq: iounmap(hsudc->regs); diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 6d8b040..100f263 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -36,6 +36,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/prefetch.h> #include <linux/debugfs.h> #include <linux/seq_file.h> diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index afef7b0..80be5472 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -312,8 +312,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device return PTR_ERR(usb_clk); hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x"); - if (!hcd) - return -ENOMEM; + if (!hcd) { + retval = -ENOMEM; + goto err0; + } r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) { @@ -368,6 +370,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); + err0: clk_put(usb_clk); return retval; } diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 2e04861..1f50b44 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -438,13 +438,13 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci, struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) { - case 0: + case SLOT_STATE_ENABLED: return "enabled/disabled"; - case 1: + case SLOT_STATE_DEFAULT: return "default"; - case 2: + case SLOT_STATE_ADDRESSED: return "addressed"; - case 3: + case SLOT_STATE_CONFIGURED: return "configured"; default: return "reserved"; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 26caba4..0f8e1d2 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -985,9 +985,19 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev, interval = clamp_val(ep->desc.bInterval, 1, 16) - 1; if (interval != ep->desc.bInterval - 1) dev_warn(&udev->dev, - "ep %#x - rounding interval to %d microframes\n", + "ep %#x - rounding interval to %d %sframes\n", ep->desc.bEndpointAddress, - 1 << interval); + 1 << interval, + udev->speed == USB_SPEED_FULL ? "" : "micro"); + + if (udev->speed == USB_SPEED_FULL) { + /* + * Full speed isoc endpoints specify interval in frames, + * not microframes. We are using microframes everywhere, + * so adjust accordingly. + */ + interval += 3; /* 1 frame = 2^3 uframes */ + } return interval; } diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c408e9f..17541d0 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -106,12 +106,22 @@ static int xhci_pci_setup(struct usb_hcd *hcd) /* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && - pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && - pdev->revision == 0x0) { + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) { + if (pdev->revision == 0x0) { xhci->quirks |= XHCI_RESET_EP_QUIRK; xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure" " endpoint cmd after reset endpoint\n"); + } + /* Fresco Logic confirms: all revisions of this chip do not + * support MSI, even though some of them claim to in their PCI + * capabilities. + */ + xhci->quirks |= XHCI_BROKEN_MSI; + xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u " + "has broken MSI implementation\n", + pdev->revision); } + if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index cc1485b..800f417 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1782,7 +1782,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, struct usb_iso_packet_descriptor *frame; int idx; - ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); urb_priv = td->urb->hcpriv; idx = urb_priv->td_cnt; frame = &td->urb->iso_frame_desc[idx]; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d9660eb..06e7023 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -430,12 +430,19 @@ int xhci_run(struct usb_hcd *hcd) free_irq(hcd->irq, hcd); hcd->irq = -1; + /* Some Fresco Logic host controllers advertise MSI, but fail to + * generate interrupts. Don't even try to enable MSI. + */ + if (xhci->quirks & XHCI_BROKEN_MSI) + goto legacy_irq; + ret = xhci_setup_msix(xhci); if (ret) /* fall back to msi*/ ret = xhci_setup_msi(xhci); if (ret) { +legacy_irq: /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); @@ -1849,8 +1856,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) /* Free any rings that were dropped, but not changed. */ for (i = 1; i < 31; ++i) { - if ((ctrl_ctx->drop_flags & (1 << (i + 1))) && - !(ctrl_ctx->add_flags & (1 << (i + 1)))) + if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) && + !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); } xhci_zero_in_ctx(xhci, virt_dev); @@ -2467,6 +2474,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_command *reset_device_cmd; int timeleft; int last_freed_endpoint; + struct xhci_slot_ctx *slot_ctx; ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__); if (ret <= 0) @@ -2499,6 +2507,12 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) return -EINVAL; } + /* If device is not setup, there is no point in resetting it */ + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); + if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) == + SLOT_STATE_DISABLED) + return 0; + xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); /* Allocate the command structure that holds the struct completion. * Assume we're in process context, since the normal device reset diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index ac0196e..7d1ea3b 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -560,6 +560,11 @@ struct xhci_slot_ctx { #define SLOT_STATE (0x1f << 27) #define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27) +#define SLOT_STATE_DISABLED 0 +#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED +#define SLOT_STATE_DEFAULT 1 +#define SLOT_STATE_ADDRESSED 2 +#define SLOT_STATE_CONFIGURED 3 /** * struct xhci_ep_ctx @@ -1302,6 +1307,7 @@ struct xhci_hcd { * commands. */ #define XHCI_EP_LIMIT_QUIRK (1 << 5) +#define XHCI_BROKEN_MSI (1 << 6) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index ab8e100..c71b037 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -96,6 +96,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/kobject.h> +#include <linux/prefetch.h> #include <linux/platform_device.h> #include <linux/io.h> diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 206cfab..547486c 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -1380,5 +1380,6 @@ void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv) { struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); + kfree(gpriv->uep); kfree(gpriv); } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index e8dbde5..1627289 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -647,6 +647,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) }, { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 1d946cd..ab1fcdf 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -351,6 +351,7 @@ */ #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 +#define FTDI_4N_GALAXY_DE_3_PID 0xF3C2 /* * Linx Technologies product ids diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 318dd00..60b25d8 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -311,10 +311,6 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_AC2726 0xfff5 #define ZTE_PRODUCT_AC8710T 0xffff -/* ZTE PRODUCTS -- alternate vendor ID */ -#define ZTE_VENDOR_ID2 0x1d6b -#define ZTE_PRODUCT_MF_330 0x0002 - #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -340,11 +336,12 @@ static void option_instat_callback(struct urb *urb); #define TOSHIBA_PRODUCT_G450 0x0d45 #define ALINK_VENDOR_ID 0x1e0e +#define ALINK_PRODUCT_PH300 0x9100 #define ALINK_PRODUCT_3GU 0x9200 /* ALCATEL PRODUCTS */ #define ALCATEL_VENDOR_ID 0x1bbb -#define ALCATEL_PRODUCT_X060S 0x0000 +#define ALCATEL_PRODUCT_X060S_X200 0x0000 #define PIRELLI_VENDOR_ID 0x1266 #define PIRELLI_PRODUCT_C100_1 0x1002 @@ -379,6 +376,9 @@ static void option_instat_callback(struct urb *urb); * It seems to contain a Qualcomm QSC6240/6290 chipset */ #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 +/* Zoom */ +#define ZOOM_PRODUCT_4597 0x9607 + /* Haier products */ #define HAIER_VENDOR_ID 0x201e #define HAIER_PRODUCT_CE100 0x2009 @@ -432,6 +432,20 @@ static const struct option_blacklist_info four_g_w14_blacklist = { .reason = OPTION_BLACKLIST_SENDSETUP }; +static const u8 alcatel_x200_no_sendsetup[] = { 0, 1 }; +static const struct option_blacklist_info alcatel_x200_blacklist = { + .infolen = ARRAY_SIZE(alcatel_x200_no_sendsetup), + .ifaceinfo = alcatel_x200_no_sendsetup, + .reason = OPTION_BLACKLIST_SENDSETUP +}; + +static const u8 zte_k3765_z_no_sendsetup[] = { 0, 1, 2 }; +static const struct option_blacklist_info zte_k3765_z_blacklist = { + .infolen = ARRAY_SIZE(zte_k3765_z_no_sendsetup), + .ifaceinfo = zte_k3765_z_no_sendsetup, + .reason = OPTION_BLACKLIST_SENDSETUP +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -916,13 +930,13 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, + 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, - { USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ @@ -935,13 +949,17 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) }, + { USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) }, { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, - { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), + .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist + }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, /* Pirelli */ { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)}, diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 0041899..e8ae21b 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -819,6 +819,35 @@ Retry_Sense: } } + /* + * Some devices don't work or return incorrect data the first + * time they get a READ(10) command, or for the first READ(10) + * after a media change. If the INITIAL_READ10 flag is set, + * keep track of whether READ(10) commands succeed. If the + * previous one succeeded and this one failed, set the REDO_READ10 + * flag to force a retry. + */ + if (unlikely((us->fflags & US_FL_INITIAL_READ10) && + srb->cmnd[0] == READ_10)) { + if (srb->result == SAM_STAT_GOOD) { + set_bit(US_FLIDX_READ10_WORKED, &us->dflags); + } else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) { + clear_bit(US_FLIDX_READ10_WORKED, &us->dflags); + set_bit(US_FLIDX_REDO_READ10, &us->dflags); + } + + /* + * Next, if the REDO_READ10 flag is set, return a result + * code that will cause the SCSI core to retry the READ(10) + * command immediately. + */ + if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) { + clear_bit(US_FLIDX_REDO_READ10, &us->dflags); + srb->result = DID_IMM_RETRY << 16; + srb->sense_buffer[0] = 0; + } + } + /* Did we transfer less than the minimum amount required? */ if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) && scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c1602b8..ccff348 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1114,6 +1114,16 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Paul Hartman <paul.hartman+linux@gmail.com> + * This card reader returns "Illegal Request, Logical Block Address + * Out of Range" for the first READ(10) after a new card is inserted. + */ +UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100, + "Feiya", + "SD/SDHC Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_INITIAL_READ10 ), + /* This Pentax still camera is not conformant * to the USB storage specification: - * - It does not like the INQUIRY command. So we must handle this command @@ -1888,6 +1898,15 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_READ_DISC_INFO ), +/* Reported by Sven Geggus <sven-usbst@geggus.net> + * This encrypted pen drive returns bogus data for the initial READ(10). + */ +UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200, + "Corsair", + "Padlock v2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_INITIAL_READ10 ), + /* Patch by Richard Schütz <r.schtz@t-online.de> * This external hard drive enclosure uses a JMicron chip which * needs the US_FL_IGNORE_RESIDUE flag to work properly. */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5ee7ac4..0ca0958 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -440,7 +440,8 @@ static void adjust_quirks(struct us_data *us) US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE | US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT | - US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16); + US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 | + US_FL_INITIAL_READ10); p = quirks; while (*p) { @@ -490,6 +491,9 @@ static void adjust_quirks(struct us_data *us) case 'm': f |= US_FL_MAX_SECTORS_64; break; + case 'n': + f |= US_FL_INITIAL_READ10; + break; case 'o': f |= US_FL_CAPACITY_OK; break; @@ -953,6 +957,13 @@ int usb_stor_probe2(struct us_data *us) if (result) goto BadDevice; + /* + * If the device returns invalid data for the first READ(10) + * command, indicate the command should be retried. + */ + if (us->fflags & US_FL_INITIAL_READ10) + set_bit(US_FLIDX_REDO_READ10, &us->dflags); + /* Acquire all the other resources and add the host */ result = usb_stor_acquire_resources(us); if (result) diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 89d3bff..7b0f211 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -73,6 +73,8 @@ struct us_unusual_dev { #define US_FLIDX_RESETTING 4 /* device reset in progress */ #define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */ #define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */ +#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */ +#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */ #define USB_STOR_STRING_LEN 32 |
