diff options
Diffstat (limited to 'drivers/usb')
27 files changed, 472 insertions, 463 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 2ee742d..0050431 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_S3C2410 default y if PXA27x default y if ARCH_EP93XX - default y if ARCH_AT91RM9200 + default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261) # PPC: default y if STB03xxx default y if PPC_MPC52xx diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index f7bdd94..218621b 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -517,19 +517,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig static struct usb_device *usbdev_lookup_minor(int minor) { - struct device *device; - struct usb_device *udev = NULL; + struct class_device *class_dev; + struct usb_device *dev = NULL; down(&usb_device_class->sem); - list_for_each_entry(device, &usb_device_class->devices, node) { - if (device->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { - udev = device->platform_data; + list_for_each_entry(class_dev, &usb_device_class->children, node) { + if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { + dev = class_dev->class_data; break; } } up(&usb_device_class->sem); - return udev; + return dev; }; /* @@ -1580,16 +1580,16 @@ static void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); - dev->usbfs_dev = device_create(usb_device_class, &dev->dev, - MKDEV(USB_DEVICE_MAJOR, minor), + dev->class_dev = class_device_create(usb_device_class, NULL, + MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev, "usbdev%d.%d", dev->bus->busnum, dev->devnum); - dev->usbfs_dev->platform_data = dev; + dev->class_dev->class_data = dev; } static void usbdev_remove(struct usb_device *dev) { - device_unregister(dev->usbfs_dev); + class_device_unregister(dev->class_dev); } static int usbdev_notify(struct notifier_block *self, unsigned long action, diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index abee0f5..8de4f8c 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -194,13 +194,14 @@ int usb_register_dev(struct usb_interface *intf, ++temp; else temp = name; - intf->usb_dev = device_create(usb_class->class, &intf->dev, - MKDEV(USB_MAJOR, minor), "%s", temp); - if (IS_ERR(intf->usb_dev)) { + intf->class_dev = class_device_create(usb_class->class, NULL, + MKDEV(USB_MAJOR, minor), + &intf->dev, "%s", temp); + if (IS_ERR(intf->class_dev)) { spin_lock (&minor_lock); usb_minors[intf->minor] = NULL; spin_unlock (&minor_lock); - retval = PTR_ERR(intf->usb_dev); + retval = PTR_ERR(intf->class_dev); } exit: return retval; @@ -241,8 +242,8 @@ void usb_deregister_dev(struct usb_interface *intf, spin_unlock (&minor_lock); snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base); - device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); - intf->usb_dev = NULL; + class_device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); + intf->class_dev = NULL; intf->minor = -1; destroy_usb_class(); } diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 363b2ad..1a32d96 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -207,7 +207,7 @@ config USB_AT91 config USB_GADGET_DUMMY_HCD boolean "Dummy HCD (DEVELOPMENT)" - depends on USB && EXPERIMENTAL + depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL select USB_GADGET_DUALSPEED help This host controller driver emulates USB, looping all data transfer diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 1c459ff..cfebca0 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -57,19 +57,23 @@ /* * This controller is simple and PIO-only. It's used in many AT91-series - * ARMv4T controllers, including the at91rm9200 (arm920T, with MMU), - * at91sam9261 (arm926ejs, with MMU), and several no-mmu versions. + * full speed USB controllers, including the at91rm9200 (arm920T, with MMU), + * at91sam926x (arm926ejs, with MMU), and several no-mmu versions. * * This driver expects the board has been wired with two GPIOs suppporting * a VBUS sensing IRQ, and a D+ pullup. (They may be omitted, but the - * testing hasn't covered such cases.) The pullup is most important; it + * testing hasn't covered such cases.) + * + * The pullup is most important (so it's integrated on sam926x parts). It * provides software control over whether the host enumerates the device. + * * The VBUS sensing helps during enumeration, and allows both USB clocks * (and the transceiver) to stay gated off until they're necessary, saving - * power. During USB suspend, the 48 MHz clock is gated off. + * power. During USB suspend, the 48 MHz clock is gated off in hardware; + * it may also be gated off by software during some Linux sleep states. */ -#define DRIVER_VERSION "8 March 2005" +#define DRIVER_VERSION "3 May 2006" static const char driver_name [] = "at91_udc"; static const char ep0name[] = "ep0"; @@ -316,9 +320,15 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status) * * There are also state bits like FORCESTALL, EPEDS, DIR, and EPTYPE * that shouldn't normally be changed. + * + * NOTE at91sam9260 docs mention synch between UDPCK and MCK clock domains, + * implying a need to wait for one write to complete (test relevant bits) + * before starting the next write. This shouldn't be an issue given how + * infrequently we write, except maybe for write-then-read idioms. */ #define SET_FX (AT91_UDP_TXPKTRDY) -#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP) +#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP \ + | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP) /* pull OUT packet data from the endpoint's fifo */ static int read_fifo (struct at91_ep *ep, struct at91_request *req) @@ -472,7 +482,8 @@ static void nuke(struct at91_ep *ep, int status) /*-------------------------------------------------------------------------*/ -static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +static int at91_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) { struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); struct at91_udc *dev = ep->udc; @@ -582,11 +593,12 @@ static int at91_ep_disable (struct usb_ep * _ep) * interesting for request or buffer allocation. */ -static struct usb_request *at91_ep_alloc_request (struct usb_ep *_ep, unsigned int gfp_flags) +static struct usb_request * +at91_ep_alloc_request(struct usb_ep *_ep, unsigned int gfp_flags) { struct at91_request *req; - req = kcalloc(1, sizeof (struct at91_request), SLAB_KERNEL); + req = kcalloc(1, sizeof (struct at91_request), gfp_flags); if (!req) return NULL; @@ -862,6 +874,7 @@ static void stop_activity(struct at91_udc *udc) if (udc->gadget.speed == USB_SPEED_UNKNOWN) driver = NULL; udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->suspended = 0; for (i = 0; i < NUM_ENDPOINTS; i++) { struct at91_ep *ep = &udc->ep[i]; @@ -889,8 +902,8 @@ static void clk_off(struct at91_udc *udc) return; udc->clocked = 0; udc->gadget.speed = USB_SPEED_UNKNOWN; - clk_disable(udc->iclk); clk_disable(udc->fclk); + clk_disable(udc->iclk); } /* @@ -911,9 +924,6 @@ static void pullup(struct at91_udc *udc, int is_on) at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); at91_set_gpio_value(udc->board.pullup_pin, 0); clk_off(udc); - - // REVISIT: with transceiver disabled, will D- float - // so that a host would falsely detect a device? } } @@ -1290,7 +1300,8 @@ static void handle_ep0(struct at91_udc *udc) if (udc->wait_for_addr_ack) { u32 tmp; - at91_udp_write(AT91_UDP_FADDR, AT91_UDP_FEN | udc->addr); + at91_udp_write(AT91_UDP_FADDR, + AT91_UDP_FEN | udc->addr); tmp = at91_udp_read(AT91_UDP_GLB_STAT); tmp &= ~AT91_UDP_FADDEN; if (udc->addr) @@ -1361,9 +1372,10 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) u32 rescans = 5; while (rescans--) { - u32 status = at91_udp_read(AT91_UDP_ISR); + u32 status; - status &= at91_udp_read(AT91_UDP_IMR); + status = at91_udp_read(AT91_UDP_ISR) + & at91_udp_read(AT91_UDP_IMR); if (!status) break; @@ -1379,18 +1391,17 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) stop_activity(udc); /* enable ep0 */ - at91_udp_write(AT91_UDP_CSR(0), AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL); + at91_udp_write(AT91_UDP_CSR(0), + AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL); udc->gadget.speed = USB_SPEED_FULL; udc->suspended = 0; at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0)); /* * NOTE: this driver keeps clocks off unless the - * USB host is present. That saves power, and also - * eliminates IRQs (reset, resume, suspend) that can - * otherwise flood from the controller. If your - * board doesn't support VBUS detection, suspend and - * resume irq logic may need more attention... + * USB host is present. That saves power, but for + * boards that don't support VBUS detection, both + * clocks need to be active most of the time. */ /* host initiated suspend (3+ms bus idle) */ @@ -1452,13 +1463,19 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) /*-------------------------------------------------------------------------*/ +static void nop_release(struct device *dev) +{ + /* nothing to free */ +} + static struct at91_udc controller = { .gadget = { - .ops = &at91_udc_ops, - .ep0 = &controller.ep[0].ep, - .name = driver_name, - .dev = { - .bus_id = "gadget" + .ops = &at91_udc_ops, + .ep0 = &controller.ep[0].ep, + .name = driver_name, + .dev = { + .bus_id = "gadget", + .release = nop_release, } }, .ep[0] = { @@ -1468,7 +1485,8 @@ static struct at91_udc controller = { }, .udc = &controller, .maxpacket = 8, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(0)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(0)), .int_mask = 1 << 0, }, .ep[1] = { @@ -1479,7 +1497,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 64, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(1)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(1)), .int_mask = 1 << 1, }, .ep[2] = { @@ -1490,7 +1509,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 64, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(2)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(2)), .int_mask = 1 << 2, }, .ep[3] = { @@ -1501,7 +1521,8 @@ static struct at91_udc controller = { }, .udc = &controller, .maxpacket = 8, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(3)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(3)), .int_mask = 1 << 3, }, .ep[4] = { @@ -1512,7 +1533,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 256, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(4)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(4)), .int_mask = 1 << 4, }, .ep[5] = { @@ -1523,10 +1545,11 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 256, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(5)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(5)), .int_mask = 1 << 5, }, - /* ep6 and ep7 are also reserved */ + /* ep6 and ep7 are also reserved (custom silicon might use them) */ }; static irqreturn_t at91_vbus_irq(int irq, void *_udc, struct pt_regs *r) @@ -1593,6 +1616,7 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) local_irq_disable(); udc->enabled = 0; + at91_udp_write(AT91_UDP_IDR, ~0); pullup(udc, 0); local_irq_enable(); @@ -1624,6 +1648,16 @@ static int __devinit at91udc_probe(struct platform_device *pdev) return -ENODEV; } + if (pdev->num_resources != 2) { + DBG("invalid num_resources"); + return -ENODEV; + } + if ((pdev->resource[0].flags != IORESOURCE_MEM) + || (pdev->resource[1].flags != IORESOURCE_IRQ)) { + DBG("invalid resource type"); + return -ENODEV; + } + if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) { DBG("someone's using UDC memory\n"); return -EBUSY; @@ -1649,19 +1683,26 @@ static int __devinit at91udc_probe(struct platform_device *pdev) if (retval < 0) goto fail0; - /* disable everything until there's a gadget driver and vbus */ - pullup(udc, 0); + /* don't do anything until we have both gadget driver and VBUS */ + clk_enable(udc->iclk); + at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); + at91_udp_write(AT91_UDP_IDR, 0xffffffff); + clk_disable(udc->iclk); /* request UDC and maybe VBUS irqs */ - if (request_irq(AT91_ID_UDP, at91_udc_irq, IRQF_DISABLED, driver_name, udc)) { - DBG("request irq %d failed\n", AT91_ID_UDP); + udc->udp_irq = platform_get_irq(pdev, 0); + if (request_irq(udc->udp_irq, at91_udc_irq, + IRQF_DISABLED, driver_name, udc)) { + DBG("request irq %d failed\n", udc->udp_irq); retval = -EBUSY; goto fail1; } if (udc->board.vbus_pin > 0) { - if (request_irq(udc->board.vbus_pin, at91_vbus_irq, IRQF_DISABLED, driver_name, udc)) { - DBG("request vbus irq %d failed\n", udc->board.vbus_pin); - free_irq(AT91_ID_UDP, udc); + if (request_irq(udc->board.vbus_pin, at91_vbus_irq, + IRQF_DISABLED, driver_name, udc)) { + DBG("request vbus irq %d failed\n", + udc->board.vbus_pin); + free_irq(udc->udp_irq, udc); retval = -EBUSY; goto fail1; } @@ -1670,6 +1711,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) udc->vbus = 1; } dev_set_drvdata(dev, udc); + device_init_wakeup(dev, 1); create_debug_file(udc); INFO("%s version %s\n", driver_name, DRIVER_VERSION); @@ -1678,14 +1720,14 @@ static int __devinit at91udc_probe(struct platform_device *pdev) fail1: device_unregister(&udc->gadget.dev); fail0: - release_mem_region(AT91_VA_BASE_UDP, SZ_16K); + release_mem_region(AT91_BASE_UDP, SZ_16K); DBG("%s probe failed, %d\n", driver_name, retval); return retval; } -static int __devexit at91udc_remove(struct platform_device *dev) +static int __devexit at91udc_remove(struct platform_device *pdev) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); DBG("remove\n"); @@ -1694,10 +1736,11 @@ static int __devexit at91udc_remove(struct platform_device *dev) if (udc->driver != 0) usb_gadget_unregister_driver(udc->driver); + device_init_wakeup(&pdev->dev, 0); remove_debug_file(udc); if (udc->board.vbus_pin > 0) free_irq(udc->board.vbus_pin, udc); - free_irq(AT91_ID_UDP, udc); + free_irq(udc->udp_irq, udc); device_unregister(&udc->gadget.dev); release_mem_region(AT91_BASE_UDP, SZ_16K); @@ -1708,31 +1751,36 @@ static int __devexit at91udc_remove(struct platform_device *dev) } #ifdef CONFIG_PM -static int at91udc_suspend(struct platform_device *dev, pm_message_t mesg) +static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); + int wake = udc->driver && device_may_wakeup(&pdev->dev); - /* - * The "safe" suspend transitions are opportunistic ... e.g. when - * the USB link is suspended (48MHz clock autogated off), or when - * it's disconnected (programmatically gated off, elsewhere). - * Then we can suspend, and the chip can enter slow clock mode. - * - * The problem case is some component (user mode?) suspending this - * device while it's active, with the 48 MHz clock in use. There - * are two basic approaches: (a) veto suspend levels involving slow - * clock mode, (b) disconnect, so 48 MHz will no longer be in use - * and we can enter slow clock mode. This uses (b) for now, since - * it's simplest until AT91 PM exists and supports the other option. + /* Unless we can act normally to the host (letting it wake us up + * whenever it has work for us) force disconnect. Wakeup requires + * PLLB for USB events (signaling for reset, wakeup, or incoming + * tokens) and VBUS irqs (on systems which support them). */ - if (udc->vbus && !udc->suspended) + if ((!udc->suspended && udc->addr) + || !wake + || at91_suspend_entering_slow_clock()) { pullup(udc, 0); + disable_irq_wake(udc->udp_irq); + } else + enable_irq_wake(udc->udp_irq); + + if (udc->board.vbus_pin > 0) { + if (wake) + enable_irq_wake(udc->board.vbus_pin); + else + disable_irq_wake(udc->board.vbus_pin); + } return 0; } -static int at91udc_resume(struct platform_device *dev) +static int at91udc_resume(struct platform_device *pdev) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); /* maybe reconnect to host; if so, clocks on */ pullup(udc, 1); @@ -1748,7 +1796,7 @@ static struct platform_driver at91_udc = { .remove = __devexit_p(at91udc_remove), .shutdown = at91udc_shutdown, .suspend = at91udc_suspend, - .resume = at91udc_resume, + .resume = at91udc_resume, .driver = { .name = (char *) driver_name, .owner = THIS_MODULE, @@ -1767,6 +1815,6 @@ static void __devexit udc_exit_module(void) } module_exit(udc_exit_module); -MODULE_DESCRIPTION("AT91RM9200 udc driver"); +MODULE_DESCRIPTION("AT91 udc driver"); MODULE_AUTHOR("Thomas Rathbone, David Brownell"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 5a4799c..882af42 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -141,6 +141,7 @@ struct at91_udc { struct clk *iclk, *fclk; struct platform_device *pdev; struct proc_dir_entry *pde; + int udp_irq; }; static inline struct at91_udc *to_udc(struct usb_gadget *g) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 4be4719..7d1c22c 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -609,7 +609,8 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) if (!dum->driver) return -ESHUTDOWN; - spin_lock_irqsave (&dum->lock, flags); + local_irq_save (flags); + spin_lock (&dum->lock); list_for_each_entry (req, &ep->queue, queue) { if (&req->req == _req) { list_del_init (&req->queue); @@ -618,7 +619,7 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) break; } } - spin_unlock_irqrestore (&dum->lock, flags); + spin_unlock (&dum->lock); if (retval == 0) { dev_dbg (udc_dev(dum), @@ -626,6 +627,7 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) req, _ep->name, _req->length, _req->buf); _req->complete (_ep, _req); } + local_irq_restore (flags); return retval; } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 85b0b4a..d63177a 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -892,7 +892,7 @@ MODULE_LICENSE ("GPL"); #define PCI_DRIVER ehci_pci_driver #endif -#ifdef CONFIG_PPC_83xx +#ifdef CONFIG_MPC834x #include "ehci-fsl.c" #define PLATFORM_DRIVER ehci_fsl_driver #endif diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index cdbafb7..85cc059 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -4,7 +4,7 @@ * Copyright (C) 2004 SAN People (Pty) Ltd. * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> * - * AT91RM9200 Bus Glue + * AT91 Bus Glue * * Based on fragments of 2.4 driver by Rick Bronson. * Based on ohci-omap.c @@ -19,12 +19,13 @@ #include <asm/hardware.h> #include <asm/arch/board.h> -#ifndef CONFIG_ARCH_AT91RM9200 -#error "CONFIG_ARCH_AT91RM9200 must be defined." +#ifndef CONFIG_ARCH_AT91 +#error "CONFIG_ARCH_AT91 must be defined." #endif /* interface and function clocks */ static struct clk *iclk, *fclk; +static int clocked; extern int usb_disabled(void); @@ -35,13 +36,14 @@ static void at91_start_hc(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; - dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n"); + dev_dbg(&pdev->dev, "start\n"); /* * Start the USB clocks. */ clk_enable(iclk); clk_enable(fclk); + clocked = 1; /* * The USB host controller must remain in reset. @@ -54,7 +56,7 @@ static void at91_stop_hc(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; - dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n"); + dev_dbg(&pdev->dev, "stop\n"); /* * Put the USB host controller into reset. @@ -66,6 +68,7 @@ static void at91_stop_hc(struct platform_device *pdev) */ clk_disable(fclk); clk_disable(iclk); + clocked = 0; } @@ -78,14 +81,15 @@ static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); /** - * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs + * usb_hcd_at91_probe - initialize AT91-based HCDs * Context: !in_interrupt() * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev) +static int usb_hcd_at91_probe(const struct hc_driver *driver, + struct platform_device *pdev) { int retval; struct usb_hcd *hcd = NULL; @@ -95,12 +99,13 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device * return -ENODEV; } - if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) { + if ((pdev->resource[0].flags != IORESOURCE_MEM) + || (pdev->resource[1].flags != IORESOURCE_IRQ)) { pr_debug("hcd probe: invalid resource type\n"); return -ENODEV; } - hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200"); + hcd = usb_create_hcd(driver, &pdev->dev, "at91"); if (!hcd) return -ENOMEM; hcd->rsrc_start = pdev->resource[0].start; @@ -149,21 +154,23 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device * /* may be called with controller, bus, and devices active */ /** - * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs + * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs * @dev: USB Host Controller being removed * Context: !in_interrupt() * * Reverses the effect of usb_hcd_at91_probe(), first invoking * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. + * context, "rmmod" or something similar. * */ -static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev) +static int usb_hcd_at91_remove(struct usb_hcd *hcd, + struct platform_device *pdev) { usb_remove_hcd(hcd); at91_stop_hc(pdev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + disable_irq_wake(hcd->irq); clk_put(fclk); clk_put(iclk); @@ -178,19 +185,21 @@ static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pde static int __devinit ohci_at91_start (struct usb_hcd *hcd) { -// struct at91_ohci_data *board = hcd->self.controller->platform_data; + struct at91_usbh_data *board = hcd->self.controller->platform_data; struct ohci_hcd *ohci = hcd_to_ohci (hcd); + struct usb_device *root = hcd->self.root_hub; int ret; if ((ret = ohci_init(ohci)) < 0) return ret; + root->maxchild = board->ports; + if ((ret = ohci_run(ohci)) < 0) { err("can't start %s", hcd->self.bus_name); ohci_stop(hcd); return ret; } -// hcd->self.root_hub->maxchild = board->ports; return 0; } @@ -198,7 +207,7 @@ ohci_at91_start (struct usb_hcd *hcd) static const struct hc_driver ohci_at91_hc_driver = { .description = hcd_name, - .product_desc = "AT91RM9200 OHCI", + .product_desc = "AT91 OHCI", .hcd_priv_size = sizeof(struct ohci_hcd), /* @@ -240,33 +249,54 @@ static const struct hc_driver ohci_at91_hc_driver = { /*-------------------------------------------------------------------------*/ -static int ohci_hcd_at91_drv_probe(struct platform_device *dev) +static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { - return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev); + device_init_wakeup(&pdev->dev, 1); + return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); } -static int ohci_hcd_at91_drv_remove(struct platform_device *dev) +static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) { - return usb_hcd_at91_remove(platform_get_drvdata(dev), dev); + device_init_wakeup(&pdev->dev, 0); + return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev); } #ifdef CONFIG_PM -/* REVISIT suspend/resume look "too" simple here */ - static int -ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg) +ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) { - clk_disable(fclk); - clk_disable(iclk); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(hcd->irq); + else + disable_irq_wake(hcd->irq); + + /* + * The integrated transceivers seem unable to notice disconnect, + * reconnect, or wakeup without the 48 MHz clock active. so for + * correctness, always discard connection state (using reset). + * + * REVISIT: some boards will be able to turn VBUS off... + */ + if (at91_suspend_entering_slow_clock()) { + ohci_usb_reset (ohci); + clk_disable(fclk); + clk_disable(iclk); + clocked = 0; + } return 0; } -static int ohci_hcd_at91_drv_resume(struct platform_device *dev) +static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) { - clk_enable(iclk); - clk_enable(fclk); + if (!clocked) { + clk_enable(iclk); + clk_enable(fclk); + } return 0; } @@ -275,7 +305,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *dev) #define ohci_hcd_at91_drv_resume NULL #endif -MODULE_ALIAS("at91rm9200-ohci"); +MODULE_ALIAS("at91_ohci"); static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, @@ -283,7 +313,7 @@ static struct platform_driver ohci_hcd_at91_driver = { .suspend = ohci_hcd_at91_drv_suspend, .resume = ohci_hcd_at91_drv_resume, .driver = { - .name = "at91rm9200-ohci", + .name = "at91_ohci", .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index afef5ac..94d8cf4 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -913,7 +913,7 @@ MODULE_LICENSE ("GPL"); #include "ohci-ppc-soc.c" #endif -#ifdef CONFIG_ARCH_AT91RM9200 +#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261) #include "ohci-at91.c" #endif @@ -927,6 +927,7 @@ MODULE_LICENSE ("GPL"); || defined (CONFIG_SOC_AU1X00) \ || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \ || defined (CONFIG_ARCH_AT91RM9200) \ + || defined (CONFIG_ARCH_AT91SAM9261) \ ) #error "missing bus glue for ohci-hcd" #endif diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index c9d72ac..66c3f61 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -943,7 +943,9 @@ static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) /* We received a short packet */ if (urb->transfer_flags & URB_SHORT_NOT_OK) ret = -EREMOTEIO; - else if (ctrlstat & TD_CTRL_SPD) + + /* Fixup needed only if this isn't the URB's last TD */ + else if (&td->list != urbp->td_list.prev) ret = 1; } diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 05d2d60..3719fcb 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -111,14 +111,28 @@ #define NAME_BUFSIZE 80 /* size of product name, path buffers */ #define DATA_BUFSIZE 63 /* size of URB data buffers */ +/* + * Duplicate event filtering time. + * Sequential, identical KIND_FILTERED inputs with less than + * FILTER_TIME milliseconds between them are considered as repeat + * events. The hardware generates 5 events for the first keypress + * and we have to take this into account for an accurate repeat + * behaviour. + */ +#define FILTER_TIME 60 /* msec */ + static unsigned long channel_mask; -module_param(channel_mask, ulong, 0444); +module_param(channel_mask, ulong, 0644); MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore"); static int debug; -module_param(debug, int, 0444); +module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); +static int repeat_filter = FILTER_TIME; +module_param(repeat_filter, int, 0644); +MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec"); + #define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0) #undef err #define err(format, arg...) printk(KERN_ERR format , ## arg) @@ -143,19 +157,6 @@ MODULE_DEVICE_TABLE(usb, ati_remote_table); static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; -/* Acceleration curve for directional control pad */ -static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; - -/* Duplicate event filtering time. - * Sequential, identical KIND_FILTERED inputs with less than - * FILTER_TIME jiffies between them are considered as repeat - * events. The hardware generates 5 events for the first keypress - * and we have to take this into account for an accurate repeat - * behaviour. - * (HZ / 20) == 50 ms and works well for me. - */ -#define FILTER_TIME (HZ / 20) - struct ati_remote { struct input_dev *idev; struct usb_device *udev; @@ -413,6 +414,43 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) } /* + * ati_remote_compute_accel + * + * Implements acceleration curve for directional control pad + * If elapsed time since last event is > 1/4 second, user "stopped", + * so reset acceleration. Otherwise, user is probably holding the control + * pad down, so we increase acceleration, ramping up over two seconds to + * a maximum speed. + */ +static int ati_remote_compute_accel(struct ati_remote *ati_remote) +{ + static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; + unsigned long now = jiffies; + int acc; + + if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) { + acc = 1; + ati_remote->acc_jiffies = now; + } + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125))) + acc = accel[0]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250))) + acc = accel[1]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500))) + acc = accel[2]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000))) + acc = accel[3]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500))) + acc = accel[4]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000))) + acc = accel[5]; + else + acc = accel[6]; + + return acc; +} + +/* * ati_remote_report_input */ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) @@ -465,9 +503,9 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) if (ati_remote_tbl[index].kind == KIND_FILTERED) { /* Filter duplicate events which happen "too close" together. */ - if ((ati_remote->old_data[0] == data[1]) && - (ati_remote->old_data[1] == data[2]) && - time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) { + if (ati_remote->old_data[0] == data[1] && + ati_remote->old_data[1] == data[2] && + time_before(jiffies, ati_remote->old_jiffies + msecs_to_jiffies(repeat_filter))) { ati_remote->repeat_count++; } else { ati_remote->repeat_count = 0; @@ -477,75 +515,61 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) ati_remote->old_data[1] = data[2]; ati_remote->old_jiffies = jiffies; - if ((ati_remote->repeat_count > 0) - && (ati_remote->repeat_count < 5)) + if (ati_remote->repeat_count > 0 && + ati_remote->repeat_count < 5) return; input_regs(dev, regs); input_event(dev, ati_remote_tbl[index].type, ati_remote_tbl[index].code, 1); + input_sync(dev); input_event(dev, ati_remote_tbl[index].type, ati_remote_tbl[index].code, 0); input_sync(dev); - return; - } + } else { - /* - * Other event kinds are from the directional control pad, and have an - * acceleration factor applied to them. Without this acceleration, the - * control pad is mostly unusable. - * - * If elapsed time since last event is > 1/4 second, user "stopped", - * so reset acceleration. Otherwise, user is probably holding the control - * pad down, so we increase acceleration, ramping up over two seconds to - * a maximum speed. The acceleration curve is #defined above. - */ - if (time_after(jiffies, ati_remote->old_jiffies + (HZ >> 2))) { - acc = 1; - ati_remote->acc_jiffies = jiffies; - } - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 3))) acc = accel[0]; - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 2))) acc = accel[1]; - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 1))) acc = accel[2]; - else if (time_before(jiffies, ati_remote->acc_jiffies + HZ)) acc = accel[3]; - else if (time_before(jiffies, ati_remote->acc_jiffies + HZ+(HZ>>1))) acc = accel[4]; - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ << 1))) acc = accel[5]; - else acc = accel[6]; - - input_regs(dev, regs); - switch (ati_remote_tbl[index].kind) { - case KIND_ACCEL: - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, - ati_remote_tbl[index].value * acc); - break; - case KIND_LU: - input_report_rel(dev, REL_X, -acc); - input_report_rel(dev, REL_Y, -acc); - break; - case KIND_RU: - input_report_rel(dev, REL_X, acc); - input_report_rel(dev, REL_Y, -acc); - break; - case KIND_LD: - input_report_rel(dev, REL_X, -acc); - input_report_rel(dev, REL_Y, acc); - break; - case KIND_RD: - input_report_rel(dev, REL_X, acc); - input_report_rel(dev, REL_Y, acc); - break; - default: - dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", - ati_remote_tbl[index].kind); - } - input_sync(dev); + /* + * Other event kinds are from the directional control pad, and have an + * acceleration factor applied to them. Without this acceleration, the + * control pad is mostly unusable. + */ + acc = ati_remote_compute_accel(ati_remote); + + input_regs(dev, regs); + switch (ati_remote_tbl[index].kind) { + case KIND_ACCEL: + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, + ati_remote_tbl[index].value * acc); + break; + case KIND_LU: + input_report_rel(dev, REL_X, -acc); + input_report_rel(dev, REL_Y, -acc); + break; + case KIND_RU: + input_report_rel(dev, REL_X, acc); + input_report_rel(dev, REL_Y, -acc); + break; + case KIND_LD: + input_report_rel(dev, REL_X, -acc); + input_report_rel(dev, REL_Y, acc); + break; + case KIND_RD: + input_report_rel(dev, REL_X, acc); + input_report_rel(dev, REL_Y, acc); + break; + default: + dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", + ati_remote_tbl[index].kind); + } + input_sync(dev); - ati_remote->old_jiffies = jiffies; - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; + ati_remote->old_jiffies = jiffies; + ati_remote->old_data[0] = data[1]; + ati_remote->old_data[1] = data[2]; + } } /* diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c index 028e1ad..7208839 100644 --- a/drivers/usb/input/hid-input.c +++ b/drivers/usb/input/hid-input.c @@ -607,7 +607,8 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel } - if (usage->hat_min < usage->hat_max || usage->hat_dir) { + if (usage->type == EV_ABS && + (usage->hat_min < usage->hat_max || usage->hat_dir)) { int i; for (i = usage->code; i < usage->code + 2 && i <= max; i++) { input_set_abs_params(input, i, -1, 1, 0, 0); diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c index 70477f0..f6b839c 100644 --- a/drivers/usb/input/hiddev.c +++ b/drivers/usb/input/hiddev.c @@ -49,7 +49,7 @@ struct hiddev { int open; wait_queue_head_t wait; struct hid_device *hid; - struct hiddev_list *list; + struct list_head list; }; struct hiddev_list { @@ -59,7 +59,7 @@ struct hiddev_list { unsigned flags; struct fasync_struct *fasync; struct hiddev *hiddev; - struct hiddev_list *next; + struct list_head node; }; static struct hiddev *hiddev_table[HIDDEV_MINORS]; @@ -73,12 +73,15 @@ static struct hiddev *hiddev_table[HIDDEV_MINORS]; static struct hid_report * hiddev_lookup_report(struct hid_device *hid, struct hiddev_report_info *rinfo) { - unsigned flags = rinfo->report_id & ~HID_REPORT_ID_MASK; + unsigned int flags = rinfo->report_id & ~HID_REPORT_ID_MASK; + unsigned int rid = rinfo->report_id & HID_REPORT_ID_MASK; struct hid_report_enum *report_enum; + struct hid_report *report; struct list_head *list; if (rinfo->report_type < HID_REPORT_TYPE_MIN || - rinfo->report_type > HID_REPORT_TYPE_MAX) return NULL; + rinfo->report_type > HID_REPORT_TYPE_MAX) + return NULL; report_enum = hid->report_enum + (rinfo->report_type - HID_REPORT_TYPE_MIN); @@ -88,21 +91,25 @@ hiddev_lookup_report(struct hid_device *hid, struct hiddev_report_info *rinfo) break; case HID_REPORT_ID_FIRST: - list = report_enum->report_list.next; - if (list == &report_enum->report_list) + if (list_empty(&report_enum->report_list)) return NULL; - rinfo->report_id = ((struct hid_report *) list)->id; + + list = report_enum->report_list.next; + report = list_entry(list, struct hid_report, list); + rinfo->report_id = report->id; break; case HID_REPORT_ID_NEXT: - list = (struct list_head *) - report_enum->report_id_hash[rinfo->report_id & HID_REPORT_ID_MASK]; - if (list == NULL) + report = report_enum->report_id_hash[rid]; + if (!report) return NULL; - list = list->next; + + list = report->list.next; if (list == &report_enum->report_list) return NULL; - rinfo->report_id = ((struct hid_report *) list)->id; + + report = list_entry(list, struct hid_report, list); + rinfo->report_id = report->id; break; default: @@ -125,12 +132,13 @@ hiddev_lookup_usage(struct hid_device *hid, struct hiddev_usage_ref *uref) struct hid_field *field; if (uref->report_type < HID_REPORT_TYPE_MIN || - uref->report_type > HID_REPORT_TYPE_MAX) return NULL; + uref->report_type > HID_REPORT_TYPE_MAX) + return NULL; report_enum = hid->report_enum + (uref->report_type - HID_REPORT_TYPE_MIN); - list_for_each_entry(report, &report_enum->report_list, list) + list_for_each_entry(report, &report_enum->report_list, list) { for (i = 0; i < report->maxfield; i++) { field = report->field[i]; for (j = 0; j < field->maxusage; j++) { @@ -142,6 +150,7 @@ hiddev_lookup_usage(struct hid_device *hid, struct hiddev_usage_ref *uref) } } } + } return NULL; } @@ -150,9 +159,9 @@ static void hiddev_send_event(struct hid_device *hid, struct hiddev_usage_ref *uref) { struct hiddev *hiddev = hid->hiddev; - struct hiddev_list *list = hiddev->list; + struct hiddev_list *list; - while (list) { + list_for_each_entry(list, &hiddev->list, node) { if (uref->field_index != HID_FIELD_INDEX_NONE || (list->flags & HIDDEV_FLAG_REPORT) != 0) { list->buffer[list->head] = *uref; @@ -160,8 +169,6 @@ static void hiddev_send_event(struct hid_device *hid, (HIDDEV_BUFFER_SIZE - 1); kill_fasync(&list->fasync, SIGIO, POLL_IN); } - - list = list->next; } wake_up_interruptible(&hiddev->wait); @@ -180,7 +187,7 @@ void hiddev_hid_event(struct hid_device *hid, struct hid_field *field, uref.report_type = (type == HID_INPUT_REPORT) ? HID_REPORT_TYPE_INPUT : ((type == HID_OUTPUT_REPORT) ? HID_REPORT_TYPE_OUTPUT : - ((type == HID_FEATURE_REPORT) ? HID_REPORT_TYPE_FEATURE:0)); + ((type == HID_FEATURE_REPORT) ? HID_REPORT_TYPE_FEATURE : 0)); uref.report_id = field->report->id; uref.field_index = field->index; uref.usage_index = (usage - field->usage); @@ -200,7 +207,7 @@ void hiddev_report_event(struct hid_device *hid, struct hid_report *report) uref.report_type = (type == HID_INPUT_REPORT) ? HID_REPORT_TYPE_INPUT : ((type == HID_OUTPUT_REPORT) ? HID_REPORT_TYPE_OUTPUT : - ((type == HID_FEATURE_REPORT) ? HID_REPORT_TYPE_FEATURE:0)); + ((type == HID_FEATURE_REPORT) ? HID_REPORT_TYPE_FEATURE : 0)); uref.report_id = report->id; uref.field_index = HID_FIELD_INDEX_NONE; @@ -213,7 +220,9 @@ static int hiddev_fasync(int fd, struct file *file, int on) { int retval; struct hiddev_list *list = file->private_data; + retval = fasync_helper(fd, file, on, &list->fasync); + return retval < 0 ? retval : 0; } @@ -224,14 +233,9 @@ static int hiddev_fasync(int fd, struct file *file, int on) static int hiddev_release(struct inode * inode, struct file * file) { struct hiddev_list *list = file->private_data; - struct hiddev_list **listptr; - listptr = &list->hiddev->list; hiddev_fasync(-1, file, 0); - - while (*listptr && (*listptr != list)) - listptr = &((*listptr)->next); - *listptr = (*listptr)->next; + list_del(&list->node); if (!--list->hiddev->open) { if (list->hiddev->exist) @@ -248,7 +252,8 @@ static int hiddev_release(struct inode * inode, struct file * file) /* * open file op */ -static int hiddev_open(struct inode * inode, struct file * file) { +static int hiddev_open(struct inode *inode, struct file *file) +{ struct hiddev_list *list; int i = iminor(inode) - HIDDEV_MINOR_BASE; @@ -260,9 +265,7 @@ static int hiddev_open(struct inode * inode, struct file * file) { return -ENOMEM; list->hiddev = hiddev_table[i]; - list->next = hiddev_table[i]->list; - hiddev_table[i]->list = list; - + list_add_tail(&list->node, &hiddev_table[i]->list); file->private_data = list; if (!list->hiddev->open++) @@ -362,6 +365,7 @@ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t coun static unsigned int hiddev_poll(struct file *file, poll_table *wait) { struct hiddev_list *list = file->private_data; + poll_wait(file, &list->hiddev->wait, wait); if (list->head != list->tail) return POLLIN | POLLRDNORM; @@ -382,7 +386,7 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd struct hiddev_collection_info cinfo; struct hiddev_report_info rinfo; struct hiddev_field_info finfo; - struct hiddev_usage_ref_multi *uref_multi=NULL; + struct hiddev_usage_ref_multi *uref_multi = NULL; struct hiddev_usage_ref *uref; struct hiddev_devinfo dinfo; struct hid_report *report; @@ -764,15 +768,15 @@ int hiddev_connect(struct hid_device *hid) } init_waitqueue_head(&hiddev->wait); - - hiddev_table[hid->intf->minor - HIDDEV_MINOR_BASE] = hiddev; - + INIT_LIST_HEAD(&hiddev->list); hiddev->hid = hid; hiddev->exist = 1; hid->minor = hid->intf->minor; hid->hiddev = hiddev; + hiddev_table[hid->intf->minor - HIDDEV_MINOR_BASE] = hiddev; + return 0; } diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index e091d32..a4062a6 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -12,8 +12,13 @@ * the single I/O ports of the device. * * Supported vendors: AK Modul-Bus Computer GmbH -* Supported devices: CY7C63001A-PC (to be continued...) -* Supported functions: Read/Write Ports (to be continued...) +* (Firmware "Port-Chip") +* +* Supported devices: CY7C63001A-PC +* CY7C63001C-PXC +* CY7C63001C-SXC +* +* Supported functions: Read/Write Ports * * * This program is free software; you can redistribute it and/or diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index e5e6e4f..bd09232 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -175,6 +175,8 @@ static inline struct sk_buff *pull_skb(rtl8150_t *); static void rtl8150_disconnect(struct usb_interface *intf); static int rtl8150_probe(struct usb_interface *intf, const struct usb_device_id *id); +static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message); +static int rtl8150_resume(struct usb_interface *intf); static const char driver_name [] = "rtl8150"; @@ -183,6 +185,8 @@ static struct usb_driver rtl8150_driver = { .probe = rtl8150_probe, .disconnect = rtl8150_disconnect, .id_table = rtl8150_table, + .suspend = rtl8150_suspend, + .resume = rtl8150_resume }; /* @@ -238,9 +242,11 @@ static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size) usb_fill_control_urb(dev->ctrl_urb, dev->udev, usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr, &dev->rx_creg, size, ctrl_callback, dev); - if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) + if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) { + if (ret == -ENODEV) + netif_device_detach(dev->netdev); err("control request submission failed: %d", ret); - else + } else set_bit(RX_REG_SET, &dev->flags); return ret; @@ -416,6 +422,7 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs) struct sk_buff *skb; struct net_device *netdev; u16 rx_stat; + int status; dev = urb->context; if (!dev) @@ -465,7 +472,10 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs) goon: usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); - if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) { + status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); + if (status == -ENODEV) + netif_device_detach(dev->netdev); + else if (status) { set_bit(RX_URB_FAIL, &dev->flags); goto resched; } else { @@ -481,6 +491,7 @@ static void rx_fixup(unsigned long data) { rtl8150_t *dev; struct sk_buff *skb; + int status; dev = (rtl8150_t *)data; @@ -499,10 +510,13 @@ static void rx_fixup(unsigned long data) usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); try_again: - if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) { + status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); + if (status == -ENODEV) { + netif_device_detach(dev->netdev); + } else if (status) { set_bit(RX_URB_FAIL, &dev->flags); goto tlsched; - } else { + } else { clear_bit(RX_URB_FAIL, &dev->flags); } @@ -574,12 +588,43 @@ static void intr_callback(struct urb *urb, struct pt_regs *regs) resubmit: status = usb_submit_urb (urb, SLAB_ATOMIC); - if (status) + if (status == -ENODEV) + netif_device_detach(dev->netdev); + else if (status) err ("can't resubmit intr, %s-%s/input0, status %d", dev->udev->bus->bus_name, dev->udev->devpath, status); } +static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message) +{ + rtl8150_t *dev = usb_get_intfdata(intf); + + netif_device_detach(dev->netdev); + + if (netif_running(dev->netdev)) { + usb_kill_urb(dev->rx_urb); + usb_kill_urb(dev->intr_urb); + } + return 0; +} + +static int rtl8150_resume(struct usb_interface *intf) +{ + rtl8150_t *dev = usb_get_intfdata(intf); + + netif_device_attach(dev->netdev); + if (netif_running(dev->netdev)) { + dev->rx_urb->status = 0; + dev->rx_urb->actual_length = 0; + read_bulk_callback(dev->rx_urb, NULL); + + dev->intr_urb->status = 0; + dev->intr_urb->actual_length = 0; + intr_callback(dev->intr_urb, NULL); + } + return 0; +} /* ** @@ -690,9 +735,14 @@ static int rtl8150_start_xmit(struct sk_buff *skb, struct net_device *netdev) usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), skb->data, count, write_bulk_callback, dev); if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) { - warn("failed tx_urb %d\n", res); - dev->stats.tx_errors++; - netif_start_queue(netdev); + /* Can we get/handle EPIPE here? */ + if (res == -ENODEV) + netif_device_detach(dev->netdev); + else { + warn("failed tx_urb %d\n", res); + dev->stats.tx_errors++; + netif_start_queue(netdev); + } } else { dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; @@ -729,16 +779,25 @@ static int rtl8150_open(struct net_device *netdev) usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); - if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) + if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) { + if (res == -ENODEV) + netif_device_detach(dev->netdev); warn("%s: rx_urb submit failed: %d", __FUNCTION__, res); + return res; + } usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3), dev->intr_buff, INTBUFSIZE, intr_callback, dev, dev->intr_interval); - if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) + if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) { + if (res == -ENODEV) + netif_device_detach(dev->netdev); warn("%s: intr_urb submit failed: %d", __FUNCTION__, res); - netif_start_queue(netdev); + usb_kill_urb(dev->rx_urb); + return res; + } enable_net_traffic(dev); set_carrier(netdev); + netif_start_queue(netdev); return res; } diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index ac33bd4..f5b9438 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -62,15 +62,6 @@ config USB_SERIAL_AIRPRIME To compile this driver as a module, choose M here: the module will be called airprime. -config USB_SERIAL_ANYDATA - tristate "USB AnyData CDMA Wireless Driver" - depends on USB_SERIAL - help - Say Y here if you want to use a AnyData CDMA device. - - To compile this driver as a module, choose M here: the - module will be called anydata. - config USB_SERIAL_ARK3116 tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL @@ -502,15 +493,18 @@ config USB_SERIAL_XIRCOM module will be called keyspan_pda. config USB_SERIAL_OPTION - tristate "USB driver for GSM modems" + tristate "USB driver for GSM and CDMA modems" depends on USB_SERIAL help - Say Y here if you have an "Option" GSM PCMCIA card - (or an OEM version: branded Huawei, Audiovox, or Novatel). + Say Y here if you have a GSM or CDMA modem that's connected to USB. + + This driver also supports several PCMCIA cards which have a + built-in OHCI-USB adapter and an internally-connected GSM modem. + The USB bus on these cards is not accessible externally. - These cards feature a built-in OHCI-USB adapter and an - internally-connected GSM modem. The USB bus is not - accessible externally. + Supported devices include (some of?) those made by: + Option, Huawei, Audiovox, Sierra Wireless, Novatel Wireless, or + Anydata. To compile this driver as a module, choose M here: the module will be called option. diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 35d4acc..8efed2c 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -12,7 +12,6 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o -obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c deleted file mode 100644 index 01843ef..0000000 --- a/drivers/usb/serial/anydata.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * AnyData CDMA Serial USB driver - * - * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> - -static struct usb_device_id id_table [] = { - { USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */ - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -/* if overridden by the user, then use their value for the size of the - * read and write urbs */ -static int buffer_size; -static int debug; - -static struct usb_driver anydata_driver = { - .name = "anydata", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, - .no_dynamic_id = 1, -}; - -static int anydata_open(struct usb_serial_port *port, struct file *filp) -{ - char *buffer; - int result = 0; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (buffer_size) { - /* override the default buffer sizes */ - buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); - return -ENOMEM; - } - kfree (port->read_urb->transfer_buffer); - port->read_urb->transfer_buffer = buffer; - port->read_urb->transfer_buffer_length = buffer_size; - - buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); - return -ENOMEM; - } - kfree (port->write_urb->transfer_buffer); - port->write_urb->transfer_buffer = buffer; - port->write_urb->transfer_buffer_length = buffer_size; - port->bulk_out_size = buffer_size; - } - - /* Start reading from the device */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - usb_serial_generic_read_bulk_callback, port); - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __FUNCTION__, result); - - return result; -} - -static struct usb_serial_driver anydata_device = { - .driver = { - .owner = THIS_MODULE, - .name = "anydata", - }, - .id_table = id_table, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, - .num_ports = 1, - .open = anydata_open, -}; - -static int __init anydata_init(void) -{ - int retval; - - retval = usb_serial_register(&anydata_device); - if (retval) - return retval; - retval = usb_register(&anydata_driver); - if (retval) - usb_serial_deregister(&anydata_device); - return retval; -} - -static void __exit anydata_exit(void) -{ - usb_deregister(&anydata_driver); - usb_serial_deregister(&anydata_device); -} - -module_init(anydata_init); -module_exit(anydata_exit); -MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); -module_param(buffer_size, int, 0); -MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers"); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b458aed..a20da85 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -337,6 +337,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 04ef90f..9f7343a 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -182,6 +182,10 @@ /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ + +#define FTDI_TNC_X_PID 0xEBE0 + /* * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). * All of these devices use FTDI's vendor ID (0x0403). diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 59c5d99..7e1bd5d 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -250,6 +250,7 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ + { USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */ { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f0530c1..c856e6f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -9,40 +9,14 @@ Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> - History: - - 2005-05-19 v0.1 Initial version, based on incomplete docs - and analysis of misbehavior with the standard driver - 2005-05-20 v0.2 Extended the input buffer to avoid losing - random 64-byte chunks of data - 2005-05-21 v0.3 implemented chars_in_buffer() - turned on low_latency - simplified the code somewhat - 2005-05-24 v0.4 option_write() sometimes deadlocked under heavy load - removed some dead code - added sponsor notice - coding style clean-up - 2005-06-20 v0.4.1 add missing braces :-/ - killed end-of-line whitespace - 2005-07-15 v0.4.2 rename WLAN product to FUSION, add FUSION2 - 2005-09-10 v0.4.3 added HUAWEI E600 card and Audiovox AirCard - 2005-09-20 v0.4.4 increased recv buffer size: the card sometimes - wants to send >2000 bytes. - 2006-04-10 v0.5 fixed two array overrun errors :-/ - 2006-04-21 v0.5.1 added support for Sierra Wireless MC8755 - 2006-05-15 v0.6 re-enable multi-port support - 2006-06-01 v0.6.1 add COBRA - 2006-06-01 v0.6.2 add backwards-compatibility stuff - 2006-06-01 v0.6.3 add Novatel Wireless - 2006-06-01 v0.7 Option => GSM - 2006-06-01 v0.7.1 add COBRA2 + History: see the git log. Work sponsored by: Sigos GmbH, Germany <info@sigos.de> This driver exists because the "normal" serial driver doesn't work too well with GSM modems. Issues: - data loss -- one single Receive URB is not nearly enough - - nonstandard flow (Option devices) and multiplex (Sierra) control + - nonstandard flow (Option devices) control - controlling the baud rate doesn't make sense This driver is named "option" because the most common device it's @@ -96,8 +70,8 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_VENDOR_ID 0x0AF0 #define HUAWEI_VENDOR_ID 0x12D1 #define AUDIOVOX_VENDOR_ID 0x0F3D -#define SIERRAWIRELESS_VENDOR_ID 0x1199 #define NOVATELWIRELESS_VENDOR_ID 0x1410 +#define ANYDATA_VENDOR_ID 0x16d5 #define OPTION_PRODUCT_OLD 0x5000 #define OPTION_PRODUCT_FUSION 0x6000 @@ -106,8 +80,8 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_PRODUCT_COBRA2 0x6600 #define HUAWEI_PRODUCT_E600 0x1001 #define AUDIOVOX_PRODUCT_AIRCARD 0x0112 -#define SIERRAWIRELESS_PRODUCT_MC8755 0x6802 #define NOVATELWIRELESS_PRODUCT_U740 0x1400 +#define ANYDATA_PRODUCT_ID 0x6501 static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, @@ -117,8 +91,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, - { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -131,10 +105,7 @@ static struct usb_device_id option_ids1[] = { { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, - { } /* Terminating entry */ -}; -static struct usb_device_id option_ids3[] = { - { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -151,37 +122,11 @@ static struct usb_driver option_driver = { /* The card has three separate interfaces, which the serial driver * recognizes separately, thus num_port=1. */ -static struct usb_serial_driver option_3port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "option", - }, - .description = "GSM modem (3-port)", - .id_table = option_ids3, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, - .num_ports = 3, - .open = option_open, - .close = option_close, - .write = option_write, - .write_room = option_write_room, - .chars_in_buffer = option_chars_in_buffer, - .throttle = option_rx_throttle, - .unthrottle = option_rx_unthrottle, - .set_termios = option_set_termios, - .break_ctl = option_break_ctl, - .tiocmget = option_tiocmget, - .tiocmset = option_tiocmset, - .attach = option_startup, - .shutdown = option_shutdown, - .read_int_callback = option_instat_callback, -}; static struct usb_serial_driver option_1port_device = { .driver = { .owner = THIS_MODULE, - .name = "option", + .name = "option1", }, .description = "GSM modem (1-port)", .id_table = option_ids1, @@ -245,9 +190,6 @@ static int __init option_init(void) retval = usb_serial_register(&option_1port_device); if (retval) goto failed_1port_device_register; - retval = usb_serial_register(&option_3port_device); - if (retval) - goto failed_3port_device_register; retval = usb_register(&option_driver); if (retval) goto failed_driver_register; @@ -257,8 +199,6 @@ static int __init option_init(void) return 0; failed_driver_register: - usb_serial_deregister (&option_3port_device); -failed_3port_device_register: usb_serial_deregister (&option_1port_device); failed_1port_device_register: return retval; @@ -267,7 +207,6 @@ failed_1port_device_register: static void __exit option_exit(void) { usb_deregister (&option_driver); - usb_serial_deregister (&option_3port_device); usb_serial_deregister (&option_1port_device); } @@ -656,7 +595,6 @@ static void option_setup_urbs(struct usb_serial *serial) dbg("%s", __FUNCTION__); - for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 259db31..efbbc0a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -81,6 +81,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, { USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) }, { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, + { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index d9c1e6e..a692ac6 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -89,3 +89,7 @@ /* DATAPILOT Universal-2 Phone Cable */ #define DATAPILOT_U2_VENDOR_ID 0x0731 #define DATAPILOT_U2_PRODUCT_ID 0x2003 + +/* Belkin "F5U257" Serial Adapter */ +#define BELKIN_VENDOR_ID 0x050d +#define BELKIN_PRODUCT_ID 0x0257 diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a5ca449..2793f9a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -145,6 +145,13 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Mario Rettig <mariorettig@web.de> */ +UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, + "Nokia", + "Nokia 3250", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and * Einar Th. Einarsson <einarthered@gmail.com> */ UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100, @@ -627,18 +634,6 @@ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Digital Camera EX-20 DSC", US_SC_8070, US_PR_DEVICE, NULL, 0 ), -/* The entry was here before I took over, and had US_SC_RBC. It turns - * out that isn't needed. Additionally, Torsten Eriksson - * <Torsten.Eriksson@bergianska.se> is able to use his device fine - * without this entry at all - but I don't suspect that will be true - * for all users (the protocol is likely needed), so is staying at - * this time. - Phil Dibowitz <phil@ipom.com> - */ -UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200, - "LaCie", - "USB Hard Disk", - US_SC_DEVICE, US_PR_CB, NULL, 0 ), - /* Submitted by Joel Bourquard <numlock@freesurf.ch> * Some versions of this device need the SubClass and Protocol overrides * while others don't. @@ -1106,7 +1101,15 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, "Optio S/S4", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), - + +/* This is a virtual windows driver CD, which the zd1211rw driver automatically + * converts into a WLAN device. */ +UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, + "ZyXEL", + "G-220F USB-WLAN Install", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE ), + #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, "ATI", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5ee19be..8d7bdcb 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -483,7 +483,7 @@ static struct us_unusual_dev *find_unusual(const struct usb_device_id *id) } /* Get the unusual_devs entries and the string descriptors */ -static void get_device_info(struct us_data *us, const struct usb_device_id *id) +static int get_device_info(struct us_data *us, const struct usb_device_id *id) { struct usb_device *dev = us->pusb_dev; struct usb_interface_descriptor *idesc = @@ -500,6 +500,11 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) unusual_dev->useTransport; us->flags = USB_US_ORIG_FLAGS(id->driver_info); + if (us->flags & US_FL_IGNORE_DEVICE) { + printk(KERN_INFO USB_STORAGE "device ignored\n"); + return -ENODEV; + } + /* * This flag is only needed when we're in high-speed, so let's * disable it if we're in full-speed @@ -541,6 +546,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) msgs[msg], UTS_RELEASE); } + + return 0; } /* Get the transport settings */ @@ -969,7 +976,9 @@ static int storage_probe(struct usb_interface *intf, * of the match from the usb_device_id table, so we can find the * corresponding entry in the private table. */ - get_device_info(us, id); + result = get_device_info(us, id); + if (result) + goto BadDevice; /* Get the transport, protocol, and pipe settings */ result = get_transport(us); |
