summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage/sddr09.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage/sddr09.c')
-rw-r--r--drivers/usb/storage/sddr09.c214
1 files changed, 130 insertions, 84 deletions
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 0ea2f5a..fb8baca 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -133,13 +133,11 @@ static struct nand_flash_dev nand_flash_ids[] = {
{ 0,}
};
-#define SIZE(a) (sizeof(a)/sizeof((a)[0]))
-
static struct nand_flash_dev *
nand_find_id(unsigned char id) {
int i;
- for (i = 0; i < SIZE(nand_flash_ids); i++)
+ for (i = 0; i < ARRAY_SIZE(nand_flash_ids); i++)
if (nand_flash_ids[i].model_id == id)
return &(nand_flash_ids[i]);
return NULL;
@@ -214,6 +212,20 @@ static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
* The actual driver starts here.
*/
+struct sddr09_card_info {
+ unsigned long capacity; /* Size of card in bytes */
+ int pagesize; /* Size of page in bytes */
+ int pageshift; /* log2 of pagesize */
+ int blocksize; /* Size of block in pages */
+ int blockshift; /* log2 of blocksize */
+ int blockmask; /* 2^blockshift - 1 */
+ int *lba_to_pba; /* logical to physical map */
+ int *pba_to_lba; /* physical to logical map */
+ int lbact; /* number of available pages */
+ int flags;
+#define SDDR09_WP 1 /* write protected */
+};
+
/*
* On my 16MB card, control blocks have size 64 (16 real control bytes,
* and 48 junk bytes). In reality of course the card uses 16 control bytes,
@@ -237,7 +249,7 @@ static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
#define SPARE 0xfffffffe
#define UNUSABLE 0xfffffffd
-static int erase_bad_lba_entries = 0;
+static const int erase_bad_lba_entries = 0;
/* send vendor interface command (0x41) */
/* called for requests 0, 1, 8 */
@@ -260,8 +272,11 @@ sddr09_send_command(struct us_data *us,
rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype,
0, 0, xfer_data, xfer_len);
- return (rc == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD :
- USB_STOR_TRANSPORT_ERROR);
+ switch (rc) {
+ case USB_STOR_XFER_GOOD: return 0;
+ case USB_STOR_XFER_STALLED: return -EPIPE;
+ default: return -EIO;
+ }
}
static int
@@ -308,20 +323,12 @@ sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) {
command[4] = buflen;
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
- US_DEBUGP("request sense failed\n");
+ if (result)
return result;
- }
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
sensebuf, buflen, NULL);
- if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("request sense bulk in failed\n");
- return USB_STOR_TRANSPORT_ERROR;
- } else {
- US_DEBUGP("request sense worked\n");
- return USB_STOR_TRANSPORT_GOOD;
- }
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
}
/*
@@ -369,7 +376,7 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress,
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result for send_control in sddr09_read2%d %d\n",
x, result);
return result;
@@ -381,9 +388,9 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress,
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n",
x, result);
- return USB_STOR_TRANSPORT_ERROR;
+ return -EIO;
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
/*
@@ -497,7 +504,7 @@ sddr09_erase(struct us_data *us, unsigned long Eaddress) {
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
US_DEBUGP("Result for send_control in sddr09_erase %d\n",
result);
@@ -555,7 +562,7 @@ sddr09_writeX(struct us_data *us,
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result for send_control in sddr09_writeX %d\n",
result);
return result;
@@ -567,9 +574,9 @@ sddr09_writeX(struct us_data *us,
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n",
result);
- return USB_STOR_TRANSPORT_ERROR;
+ return -EIO;
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
/* erase address, write same address */
@@ -633,7 +640,7 @@ sddr09_read_sg_test_only(struct us_data *us) {
result = sddr09_send_scsi_command(us, command, 4*nsg+3);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result for send_control in sddr09_read_sg %d\n",
result);
return result;
@@ -641,7 +648,7 @@ sddr09_read_sg_test_only(struct us_data *us) {
buf = (unsigned char *) kmalloc(bulklen, GFP_NOIO);
if (!buf)
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
buf, bulklen, NULL);
@@ -649,10 +656,10 @@ sddr09_read_sg_test_only(struct us_data *us) {
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n",
result);
- return USB_STOR_TRANSPORT_ERROR;
+ return -EIO;
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
#endif
@@ -681,14 +688,13 @@ sddr09_read_status(struct us_data *us, unsigned char *status) {
command[1] = LUNBITS;
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
return result;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
data, 64, NULL);
*status = data[0];
- return (result == USB_STOR_XFER_GOOD ?
- USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
}
static int
@@ -703,6 +709,13 @@ sddr09_read_data(struct us_data *us,
unsigned int len, index, offset;
int result;
+ // Figure out the initial LBA and page
+ lba = address >> info->blockshift;
+ page = (address & info->blockmask);
+ maxlba = info->capacity >> (info->pageshift + info->blockshift);
+ if (lba >= maxlba)
+ return -EIO;
+
// Since we only read in one block at a time, we have to create
// a bounce buffer and move the data a piece at a time between the
// bounce buffer and the actual transfer buffer.
@@ -711,18 +724,13 @@ sddr09_read_data(struct us_data *us,
buffer = kmalloc(len, GFP_NOIO);
if (buffer == NULL) {
printk("sddr09_read_data: Out of memory\n");
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
}
- // Figure out the initial LBA and page
- lba = address >> info->blockshift;
- page = (address & info->blockmask);
- maxlba = info->capacity >> (info->pageshift + info->blockshift);
-
// This could be made much more efficient by checking for
// contiguous LBA's. Another exercise left to the student.
- result = USB_STOR_TRANSPORT_GOOD;
+ result = 0;
index = offset = 0;
while (sectors > 0) {
@@ -735,7 +743,7 @@ sddr09_read_data(struct us_data *us,
if (lba >= maxlba) {
US_DEBUGP("Error: Requested lba %u exceeds "
"maximum %u\n", lba, maxlba);
- result = USB_STOR_TRANSPORT_ERROR;
+ result = -EIO;
break;
}
@@ -749,7 +757,7 @@ sddr09_read_data(struct us_data *us,
/* This is not really an error. It just means
that the block has never been written.
- Instead of returning USB_STOR_TRANSPORT_ERROR
+ Instead of returning an error
it is better to return all zero data. */
memset(buffer, 0, len);
@@ -764,7 +772,7 @@ sddr09_read_data(struct us_data *us,
result = sddr09_read20(us, address>>1,
pages, info->pageshift, buffer, 0);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
break;
}
@@ -830,7 +838,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
pba = sddr09_find_unused_pba(info, lba);
if (!pba) {
printk("sddr09_write_lba: Out of unused blocks\n");
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOSPC;
}
info->pba_to_lba[pba] = lba;
info->lba_to_pba[lba] = pba;
@@ -841,7 +849,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
/* Maybe it is impossible to write to PBA 1.
Fake success, but don't do anything. */
printk("sddr09: avoid writing to pba 1\n");
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
@@ -850,7 +858,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
address = (pba << (info->pageshift + info->blockshift));
result = sddr09_read22(us, address>>1, info->blocksize,
info->pageshift, blockbuffer, 0);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
return result;
/* check old contents and fill lba */
@@ -897,7 +905,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
{
unsigned char status = 0;
int result2 = sddr09_read_status(us, &status);
- if (result2 != USB_STOR_TRANSPORT_GOOD)
+ if (result2)
US_DEBUGP("sddr09_write_inplace: cannot read status\n");
else if (status != 0xc0)
US_DEBUGP("sddr09_write_inplace: status after write: 0x%x\n",
@@ -920,13 +928,20 @@ sddr09_write_data(struct us_data *us,
unsigned int sectors) {
struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
- unsigned int lba, page, pages;
+ unsigned int lba, maxlba, page, pages;
unsigned int pagelen, blocklen;
unsigned char *blockbuffer;
unsigned char *buffer;
unsigned int len, index, offset;
int result;
+ // Figure out the initial LBA and page
+ lba = address >> info->blockshift;
+ page = (address & info->blockmask);
+ maxlba = info->capacity >> (info->pageshift + info->blockshift);
+ if (lba >= maxlba)
+ return -EIO;
+
// blockbuffer is used for reading in the old data, overwriting
// with the new data, and performing ECC calculations
@@ -938,7 +953,7 @@ sddr09_write_data(struct us_data *us,
blockbuffer = kmalloc(blocklen, GFP_NOIO);
if (!blockbuffer) {
printk("sddr09_write_data: Out of memory\n");
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
}
// Since we don't write the user data directly to the device,
@@ -950,14 +965,10 @@ sddr09_write_data(struct us_data *us,
if (buffer == NULL) {
printk("sddr09_write_data: Out of memory\n");
kfree(blockbuffer);
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
}
- // Figure out the initial LBA and page
- lba = address >> info->blockshift;
- page = (address & info->blockmask);
-
- result = USB_STOR_TRANSPORT_GOOD;
+ result = 0;
index = offset = 0;
while (sectors > 0) {
@@ -967,13 +978,21 @@ sddr09_write_data(struct us_data *us,
pages = min(sectors, info->blocksize - page);
len = (pages << info->pageshift);
+ /* Not overflowing capacity? */
+ if (lba >= maxlba) {
+ US_DEBUGP("Error: Requested lba %u exceeds "
+ "maximum %u\n", lba, maxlba);
+ result = -EIO;
+ break;
+ }
+
// Get the data from the transfer buffer
usb_stor_access_xfer_buf(buffer, len, us->srb,
&index, &offset, FROM_XFER_BUF);
result = sddr09_write_lba(us, lba, page, pages,
buffer, blockbuffer);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
break;
page = 0;
@@ -1022,7 +1041,7 @@ sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) {
command[1] = LUNBITS;
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
return result;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
@@ -1031,8 +1050,7 @@ sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) {
for (i = 0; i < 4; i++)
deviceID[i] = content[i];
- return (result == USB_STOR_XFER_GOOD ?
- USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
}
static int
@@ -1041,7 +1059,7 @@ sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) {
unsigned char status;
result = sddr09_read_status(us, &status);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_get_wp: read_status fails\n");
return result;
}
@@ -1057,7 +1075,7 @@ sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) {
if (status & 0x1)
US_DEBUGP(" Error");
US_DEBUGP("\n");
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
#if 0
@@ -1089,7 +1107,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
result = sddr09_read_deviceID(us, deviceID);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result of read_deviceID is %d\n", result);
printk("sddr09: could not read card info\n");
return NULL;
@@ -1200,7 +1218,7 @@ sddr09_read_map(struct us_data *us) {
us, address>>1,
min(alloc_blocks, numblocks - i),
buffer, 0);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
result = -1;
goto done;
}
@@ -1342,29 +1360,53 @@ sddr09_card_info_destructor(void *extra) {
kfree(info->pba_to_lba);
}
-static void
-sddr09_init_card_info(struct us_data *us) {
- if (!us->extra) {
- us->extra = kmalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
- if (us->extra) {
- memset(us->extra, 0, sizeof(struct sddr09_card_info));
- us->extra_destructor = sddr09_card_info_destructor;
- }
+static int
+sddr09_common_init(struct us_data *us) {
+ int result;
+
+ /* set the configuration -- STALL is an acceptable response here */
+ if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
+ US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev
+ ->actconfig->desc.bConfigurationValue);
+ return -EINVAL;
+ }
+
+ result = usb_reset_configuration(us->pusb_dev);
+ US_DEBUGP("Result of usb_reset_configuration is %d\n", result);
+ if (result == -EPIPE) {
+ US_DEBUGP("-- stall on control interface\n");
+ } else if (result != 0) {
+ /* it's not a stall, but another error -- time to bail */
+ US_DEBUGP("-- Unknown error. Rejecting device\n");
+ return -EINVAL;
}
+
+ us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
+ if (!us->extra)
+ return -ENOMEM;
+ us->extra_destructor = sddr09_card_info_destructor;
+
+ nand_init_ecc();
+ return 0;
}
+
/*
* This is needed at a very early stage. If this is not listed in the
* unusual devices list but called from here then LUN 0 of the combo reader
* is not recognized. But I do not know what precisely these calls do.
*/
int
-sddr09_init(struct us_data *us) {
+usb_stor_sddr09_dpcm_init(struct us_data *us) {
int result;
unsigned char *data = us->iobuf;
+ result = sddr09_common_init(us);
+ if (result)
+ return result;
+
result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_init: send_command fails\n");
return result;
}
@@ -1373,7 +1415,7 @@ sddr09_init(struct us_data *us) {
// get 07 02
result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_init: 2nd send_command fails\n");
return result;
}
@@ -1382,7 +1424,7 @@ sddr09_init(struct us_data *us) {
// get 07 00
result = sddr09_request_sense(us, data, 18);
- if (result == USB_STOR_TRANSPORT_GOOD && data[2] != 0) {
+ if (result == 0 && data[2] != 0) {
int j;
for (j=0; j<18; j++)
printk(" %02X", data[j]);
@@ -1398,7 +1440,7 @@ sddr09_init(struct us_data *us) {
// test unit ready
- return USB_STOR_TRANSPORT_GOOD; /* not result */
+ return 0; /* not result */
}
/*
@@ -1427,13 +1469,6 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
};
info = (struct sddr09_card_info *)us->extra;
- if (!info) {
- nand_init_ecc();
- sddr09_init_card_info(us);
- info = (struct sddr09_card_info *)us->extra;
- if (!info)
- return USB_STOR_TRANSPORT_ERROR;
- }
if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) {
/* for a faked command, we have to follow with a faked sense */
@@ -1536,7 +1571,9 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
US_DEBUGP("READ_10: read page %d pagect %d\n",
page, pages);
- return sddr09_read_data(us, page, pages);
+ result = sddr09_read_data(us, page, pages);
+ return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
+ USB_STOR_TRANSPORT_ERROR);
}
if (srb->cmnd[0] == WRITE_10) {
@@ -1549,7 +1586,9 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
US_DEBUGP("WRITE_10: write page %d pagect %d\n",
page, pages);
- return sddr09_write_data(us, page, pages);
+ result = sddr09_write_data(us, page, pages);
+ return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
+ USB_STOR_TRANSPORT_ERROR);
}
/* catch-all for all other commands, except
@@ -1575,10 +1614,10 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
US_DEBUGP("SDDR09: Send control for command %s\n", ptr);
result = sddr09_send_scsi_command(us, srb->cmnd, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_transport: sddr09_send_scsi_command "
"returns %d\n", result);
- return result;
+ return USB_STOR_TRANSPORT_ERROR;
}
if (srb->request_bufflen == 0)
@@ -1606,3 +1645,10 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
return USB_STOR_TRANSPORT_GOOD;
}
+/*
+ * Initialization routine for the sddr09 subdriver
+ */
+int
+usb_stor_sddr09_init(struct us_data *us) {
+ return sddr09_common_init(us);
+}
OpenPOWER on IntegriCloud