summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/cp2101.c5
-rw-r--r--drivers/usb/serial/cypress_m8.c254
-rw-r--r--drivers/usb/serial/ftdi_sio.c58
-rw-r--r--drivers/usb/serial/ftdi_sio.h54
-rw-r--r--drivers/usb/serial/keyspan.c8
-rw-r--r--drivers/usb/serial/option.c203
-rw-r--r--drivers/usb/serial/pl2303.c10
-rw-r--r--drivers/usb/serial/pl2303.h4
-rw-r--r--drivers/usb/serial/usb-serial.c24
9 files changed, 376 insertions, 244 deletions
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 4ace996..97c78c2 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -32,7 +32,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.04"
+#define DRIVER_VERSION "v0.05"
#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
/*
@@ -54,8 +54,11 @@ static void cp2101_shutdown(struct usb_serial*);
static int debug;
static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 012e63e..9ee1aaf 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -453,8 +453,8 @@ static int generic_startup (struct usb_serial *serial)
priv->cbr_mask = B300;
usb_set_serial_port_data(serial->port[0], priv);
- return (0);
-}
+ return 0;
+}
static int cypress_earthmate_startup (struct usb_serial *serial)
@@ -464,14 +464,15 @@ static int cypress_earthmate_startup (struct usb_serial *serial)
dbg("%s", __FUNCTION__);
if (generic_startup(serial)) {
- dbg("%s - Failed setting up port %d", __FUNCTION__, serial->port[0]->number);
+ dbg("%s - Failed setting up port %d", __FUNCTION__,
+ serial->port[0]->number);
return 1;
}
priv = usb_get_serial_port_data(serial->port[0]);
priv->chiptype = CT_EARTHMATE;
-
- return (0);
+
+ return 0;
} /* cypress_earthmate_startup */
@@ -482,14 +483,15 @@ static int cypress_hidcom_startup (struct usb_serial *serial)
dbg("%s", __FUNCTION__);
if (generic_startup(serial)) {
- dbg("%s - Failed setting up port %d", __FUNCTION__, serial->port[0]->number);
+ dbg("%s - Failed setting up port %d", __FUNCTION__,
+ serial->port[0]->number);
return 1;
}
priv = usb_get_serial_port_data(serial->port[0]);
priv->chiptype = CT_CYPHIDCOM;
- return (0);
+ return 0;
} /* cypress_hidcom_startup */
@@ -608,8 +610,7 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp)
timeout = max((HZ*2560)/bps,HZ/10);
else
timeout = 2*HZ;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(timeout);
+ schedule_timeout_interruptible(timeout);
dbg("%s - stopping urbs", __FUNCTION__);
usb_kill_urb (port->interrupt_in_urb);
@@ -909,7 +910,8 @@ static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsi
} /* cypress_ioctl */
-static void cypress_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void cypress_set_termios (struct usb_serial_port *port,
+ struct termios *old_termios)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
@@ -918,7 +920,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
unsigned long flags;
__u8 oldlines;
int linechange = 0;
-
+
dbg("%s - port %d", __FUNCTION__, port->number);
tty = port->tty;
@@ -931,10 +933,12 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
if (!priv->termios_initialized) {
if (priv->chiptype == CT_EARTHMATE) {
*(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
+ CLOCAL;
} else if (priv->chiptype == CT_CYPHIDCOM) {
*(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ CLOCAL;
}
priv->termios_initialized = 1;
}
@@ -946,12 +950,15 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
/* check if there are new settings */
if (old_termios) {
if ((cflag != old_termios->c_cflag) ||
- (RELEVANT_IFLAG(iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) {
- dbg("%s - attempting to set new termios settings", __FUNCTION__);
- /* should make a copy of this in case something goes wrong in the function, we can restore it */
+ (RELEVANT_IFLAG(iflag) !=
+ RELEVANT_IFLAG(old_termios->c_iflag))) {
+ dbg("%s - attempting to set new termios settings",
+ __FUNCTION__);
+ /* should make a copy of this in case something goes
+ * wrong in the function, we can restore it */
spin_lock_irqsave(&priv->lock, flags);
priv->tmp_termios = *(tty->termios);
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
} else {
dbg("%s - nothing to do, exiting", __FUNCTION__);
return;
@@ -962,21 +969,34 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
/* set number of data bits, parity, stop bits */
/* when parity is disabled the parity type bit is ignored */
- stop_bits = cflag & CSTOPB ? 1 : 0; /* 1 means 2 stop bits, 0 means 1 stop bit */
-
+ /* 1 means 2 stop bits, 0 means 1 stop bit */
+ stop_bits = cflag & CSTOPB ? 1 : 0;
+
if (cflag & PARENB) {
parity_enable = 1;
- parity_type = cflag & PARODD ? 1 : 0; /* 1 means odd parity, 0 means even parity */
+ /* 1 means odd parity, 0 means even parity */
+ parity_type = cflag & PARODD ? 1 : 0;
} else
parity_enable = parity_type = 0;
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
- case CS5: data_bits = 0; break;
- case CS6: data_bits = 1; break;
- case CS7: data_bits = 2; break;
- case CS8: data_bits = 3; break;
- default: err("%s - CSIZE was set, but not CS5-CS8", __FUNCTION__); data_bits = 3;
+ case CS5:
+ data_bits = 0;
+ break;
+ case CS6:
+ data_bits = 1;
+ break;
+ case CS7:
+ data_bits = 2;
+ break;
+ case CS8:
+ data_bits = 3;
+ break;
+ default:
+ err("%s - CSIZE was set, but not CS5-CS8",
+ __FUNCTION__);
+ data_bits = 3;
}
} else
data_bits = 3;
@@ -991,63 +1011,85 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
} else {
baud_mask = (cflag & CBAUD);
switch(baud_mask) {
- case B300: dbg("%s - setting baud 300bps", __FUNCTION__); break;
- case B600: dbg("%s - setting baud 600bps", __FUNCTION__); break;
- case B1200: dbg("%s - setting baud 1200bps", __FUNCTION__); break;
- case B2400: dbg("%s - setting baud 2400bps", __FUNCTION__); break;
- case B4800: dbg("%s - setting baud 4800bps", __FUNCTION__); break;
- case B9600: dbg("%s - setting baud 9600bps", __FUNCTION__); break;
- case B19200: dbg("%s - setting baud 19200bps", __FUNCTION__); break;
- case B38400: dbg("%s - setting baud 38400bps", __FUNCTION__); break;
- case B57600: dbg("%s - setting baud 57600bps", __FUNCTION__); break;
- case B115200: dbg("%s - setting baud 115200bps", __FUNCTION__); break;
- default: dbg("%s - unknown masked baud rate", __FUNCTION__);
+ case B300:
+ dbg("%s - setting baud 300bps", __FUNCTION__);
+ break;
+ case B600:
+ dbg("%s - setting baud 600bps", __FUNCTION__);
+ break;
+ case B1200:
+ dbg("%s - setting baud 1200bps", __FUNCTION__);
+ break;
+ case B2400:
+ dbg("%s - setting baud 2400bps", __FUNCTION__);
+ break;
+ case B4800:
+ dbg("%s - setting baud 4800bps", __FUNCTION__);
+ break;
+ case B9600:
+ dbg("%s - setting baud 9600bps", __FUNCTION__);
+ break;
+ case B19200:
+ dbg("%s - setting baud 19200bps", __FUNCTION__);
+ break;
+ case B38400:
+ dbg("%s - setting baud 38400bps", __FUNCTION__);
+ break;
+ case B57600:
+ dbg("%s - setting baud 57600bps", __FUNCTION__);
+ break;
+ case B115200:
+ dbg("%s - setting baud 115200bps", __FUNCTION__);
+ break;
+ default:
+ dbg("%s - unknown masked baud rate", __FUNCTION__);
}
priv->line_control = (CONTROL_DTR | CONTROL_RTS);
}
spin_unlock_irqrestore(&priv->lock, flags);
-
- dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)", __FUNCTION__,
- stop_bits, parity_enable, parity_type, data_bits);
- cypress_serial_control(port, baud_mask, data_bits, stop_bits, parity_enable,
- parity_type, 0, CYPRESS_SET_CONFIG);
+ dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
+ "%d data_bits (+5)", __FUNCTION__, stop_bits,
+ parity_enable, parity_type, data_bits);
+
+ cypress_serial_control(port, baud_mask, data_bits, stop_bits,
+ parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
- /* we perform a CYPRESS_GET_CONFIG so that the current settings are filled into the private structure
- * this should confirm that all is working if it returns what we just set */
+ /* we perform a CYPRESS_GET_CONFIG so that the current settings are
+ * filled into the private structure this should confirm that all is
+ * working if it returns what we just set */
cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
- /* Here we can define custom tty settings for devices
- *
- * the main tty termios flag base comes from empeg.c
- */
+ /* Here we can define custom tty settings for devices; the main tty
+ * termios flag base comes from empeg.c */
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
-
- dbg("Using custom termios settings for a baud rate of 4800bps.");
+ dbg("Using custom termios settings for a baud rate of "
+ "4800bps.");
/* define custom termios settings for NMEA protocol */
tty->termios->c_iflag /* input modes - */
- &= ~(IGNBRK /* disable ignore break */
- | BRKINT /* disable break causes interrupt */
- | PARMRK /* disable mark parity errors */
- | ISTRIP /* disable clear high bit of input characters */
- | INLCR /* disable translate NL to CR */
- | IGNCR /* disable ignore CR */
- | ICRNL /* disable translate CR to NL */
- | IXON); /* disable enable XON/XOFF flow control */
-
+ &= ~(IGNBRK /* disable ignore break */
+ | BRKINT /* disable break causes interrupt */
+ | PARMRK /* disable mark parity errors */
+ | ISTRIP /* disable clear high bit of input char */
+ | INLCR /* disable translate NL to CR */
+ | IGNCR /* disable ignore CR */
+ | ICRNL /* disable translate CR to NL */
+ | IXON); /* disable enable XON/XOFF flow control */
+
tty->termios->c_oflag /* output modes */
- &= ~OPOST; /* disable postprocess output characters */
-
- tty->termios->c_lflag /* line discipline modes */
- &= ~(ECHO /* disable echo input characters */
- | ECHONL /* disable echo new line */
- | ICANON /* disable erase, kill, werase, and rprnt special characters */
- | ISIG /* disable interrupt, quit, and suspend special characters */
- | IEXTEN); /* disable non-POSIX special characters */
+ &= ~OPOST; /* disable postprocess output char */
+ tty->termios->c_lflag /* line discipline modes */
+ &= ~(ECHO /* disable echo input characters */
+ | ECHONL /* disable echo new line */
+ | ICANON /* disable erase, kill, werase, and rprnt
+ special characters */
+ | ISIG /* disable interrupt, quit, and suspend
+ special characters */
+ | IEXTEN); /* disable non-POSIX special characters */
} /* CT_CYPHIDCOM: Application should handle this for device */
linechange = (priv->line_control != oldlines);
@@ -1060,7 +1102,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
}
} /* cypress_set_termios */
-
+
/* returns amount of data still left in soft buffer */
static int cypress_chars_in_buffer(struct usb_serial_port *port)
{
@@ -1088,7 +1130,7 @@ static void cypress_throttle (struct usb_serial_port *port)
spin_lock_irqsave(&priv->lock, flags);
priv->rx_flags = THROTTLED;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -1110,7 +1152,8 @@ static void cypress_unthrottle (struct usb_serial_port *port)
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting read urb, "
+ "error %d\n", __FUNCTION__, result);
}
}
@@ -1122,7 +1165,7 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
- char tty_flag = TTY_NORMAL;
+ char tty_flag = TTY_NORMAL;
int havedata = 0;
int bytes = 0;
int result;
@@ -1131,7 +1174,8 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
dbg("%s - port %d", __FUNCTION__, port->number);
if (urb->status) {
- dbg("%s - nonzero read status received: %d", __FUNCTION__, urb->status);
+ dbg("%s - nonzero read status received: %d", __FUNCTION__,
+ urb->status);
return;
}
@@ -1155,51 +1199,55 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
case 32:
/* This is for the CY7C64013... */
priv->current_status = data[0] & 0xF8;
- bytes = data[1]+2;
- i=2;
+ bytes = data[1] + 2;
+ i = 2;
if (bytes > 2)
havedata = 1;
break;
case 8:
/* This is for the CY7C63743... */
priv->current_status = data[0] & 0xF8;
- bytes = (data[0] & 0x07)+1;
- i=1;
+ bytes = (data[0] & 0x07) + 1;
+ i = 1;
if (bytes > 1)
havedata = 1;
break;
default:
- dbg("%s - wrong packet size - received %d bytes", __FUNCTION__, urb->actual_length);
+ dbg("%s - wrong packet size - received %d bytes",
+ __FUNCTION__, urb->actual_length);
spin_unlock_irqrestore(&priv->lock, flags);
goto continue_read;
}
spin_unlock_irqrestore(&priv->lock, flags);
- usb_serial_debug_data (debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data (debug, &port->dev, __FUNCTION__,
+ urb->actual_length, data);
spin_lock_irqsave(&priv->lock, flags);
/* check to see if status has changed */
if (priv != NULL) {
if (priv->current_status != priv->prev_status) {
- priv->diff_status |= priv->current_status ^ priv->prev_status;
+ priv->diff_status |= priv->current_status ^
+ priv->prev_status;
wake_up_interruptible(&priv->delta_msr_wait);
priv->prev_status = priv->current_status;
}
}
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
- /* hangup, as defined in acm.c... this might be a bad place for it though */
- if (tty && !(tty->termios->c_cflag & CLOCAL) && !(priv->current_status & UART_CD)) {
+ /* hangup, as defined in acm.c... this might be a bad place for it
+ * though */
+ if (tty && !(tty->termios->c_cflag & CLOCAL) &&
+ !(priv->current_status & UART_CD)) {
dbg("%s - calling hangup", __FUNCTION__);
tty_hangup(tty);
goto continue_read;
}
- /* There is one error bit... I'm assuming it is a parity error indicator
- * as the generic firmware will set this bit to 1 if a parity error occurs.
- * I can not find reference to any other error events.
- *
- */
+ /* There is one error bit... I'm assuming it is a parity error
+ * indicator as the generic firmware will set this bit to 1 if a
+ * parity error occurs.
+ * I can not find reference to any other error events. */
spin_lock_irqsave(&priv->lock, flags);
if (priv->current_status & CYP_ERROR) {
spin_unlock_irqrestore(&priv->lock, flags);
@@ -1211,7 +1259,8 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
/* process read if there is data other than line status */
if (tty && (bytes > i)) {
for (; i < bytes ; ++i) {
- dbg("pushing byte number %d - %d - %c",i,data[i],data[i]);
+ dbg("pushing byte number %d - %d - %c", i, data[i],
+ data[i]);
if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
tty_flip_buffer_push(tty);
}
@@ -1221,25 +1270,28 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
}
spin_lock_irqsave(&priv->lock, flags);
- priv->bytes_in += bytes; /* control and status byte(s) are also counted */
+ /* control and status byte(s) are also counted */
+ priv->bytes_in += bytes;
spin_unlock_irqrestore(&priv->lock, flags);
continue_read:
-
- /* Continue trying to always read... unless the port has closed. */
+
+ /* Continue trying to always read... unless the port has closed. */
if (port->open_count > 0) {
- usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
- usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress),
- port->interrupt_in_urb->transfer_buffer,
- port->interrupt_in_urb->transfer_buffer_length,
- cypress_read_int_callback, port,
- interval);
- result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
+ usb_rcvintpipe(port->serial->dev,
+ port->interrupt_in_endpointAddress),
+ port->interrupt_in_urb->transfer_buffer,
+ port->interrupt_in_urb->transfer_buffer_length,
+ cypress_read_int_callback, port, interval);
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev, "%s - failed resubmitting "
+ "read urb, error %d\n", __FUNCTION__,
+ result);
}
-
+
return;
} /* cypress_read_int_callback */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d1964a0..4e434cb 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -269,6 +269,8 @@
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
+static __u16 vendor = FTDI_VID;
+static __u16 product;
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
struct ftdi_sio_quirk {
@@ -407,6 +409,34 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
+ /*
+ * These will probably use user-space drivers. Uncomment them if
+ * you need them or use the user-specified vendor/product module
+ * parameters (see ftdi_sio.h for the numbers). Make a fuss if
+ * you think the driver should recognize any of them by default.
+ */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, */
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -418,6 +448,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
+ { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
@@ -427,12 +458,21 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
- { } /* Terminating entry */
+ { }, /* Optional parameter entry */
+ { } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined);
@@ -874,7 +914,7 @@ static void ftdi_determine_type(struct usb_serial_port *port)
unsigned interfaces;
/* Assume it is not the original SIO device for now. */
- priv->baud_base = 48000000 / 16;
+ priv->baud_base = 48000000 / 2;
priv->write_offset = 0;
version = le16_to_cpu(udev->descriptor.bcdDevice);
@@ -2030,6 +2070,15 @@ static int __init ftdi_init (void)
int retval;
dbg("%s", __FUNCTION__);
+ if (vendor > 0 && product > 0) {
+ /* Add user specified VID/PID to reserved element of table. */
+ int i;
+ for (i = 0; id_table_combined[i].idVendor; i++)
+ ;
+ id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+ id_table_combined[i].idVendor = vendor;
+ id_table_combined[i].idProduct = product;
+ }
retval = usb_serial_register(&ftdi_sio_device);
if (retval)
goto failed_sio_register;
@@ -2066,4 +2115,9 @@ MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
+module_param(vendor, ushort, 0);
+MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
+ __MODULE_STRING(FTDI_VID)")");
+module_param(product, ushort, 0);
+MODULE_PARM_DESC(vendor, "User specified product ID");
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 9f43420..2c35d74 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -142,10 +142,43 @@
/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
-/* ELV USB Module UO100 (PID sent by Stefan Frings) */
-#define FTDI_ELV_UO100_PID 0xFB58 /* Product Id */
-/* ELV USB Module UM100 (PID sent by Arnim Laeuger) */
-#define FTDI_ELV_UM100_PID 0xFB5A /* Product Id */
+/*
+ * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
+ * All of these devices use FTDI's vendor ID (0x0403).
+ *
+ * The previously included PID for the UO 100 module was incorrect.
+ * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
+ *
+ * Armin Laeuger originally sent the PID for the UM 100 module.
+ */
+#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
+#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
+#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
+#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
+/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
+ * MS Windows, rather than the FTDI Virtual Com Port drivers.
+ * Maybe these will be easier to use with the libftdi/libusb user-space
+ * drivers, or possibly the Comedi drivers in some cases. */
+#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
+#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
+#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
+#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
+#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
+#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
+#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
+#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
+#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
+#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
+#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
+#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
+#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
+#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
+#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
+#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
+#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
/*
* Definitions for ID TECH (www.idt-net.com) devices
@@ -222,6 +255,7 @@
*/
#define FALCOM_VID 0x0F94 /* Vendor Id */
#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
+#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
/*
* SUUNTO product ids
@@ -277,6 +311,18 @@
#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
/*
+ * Xsens Technologies BV products (http://www.xsens.com).
+ */
+#define XSENS_CONVERTER_0_PID 0xD388
+#define XSENS_CONVERTER_1_PID 0xD389
+#define XSENS_CONVERTER_2_PID 0xD38A
+#define XSENS_CONVERTER_3_PID 0xD38B
+#define XSENS_CONVERTER_4_PID 0xD38C
+#define XSENS_CONVERTER_5_PID 0xD38D
+#define XSENS_CONVERTER_6_PID 0xD38E
+#define XSENS_CONVERTER_7_PID 0xD38F
+
+/*
* Evolution Robotics products (http://www.evolution.com/).
* Submitted by Shawn M. Lavelle.
*/
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index fb09262..3b958e6 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -383,11 +383,8 @@ static int keyspan_write(struct usb_serial_port *port,
dbg("%s - endpoint %d flip %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), flip);
if (this_urb->status == -EINPROGRESS) {
- if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
- break;
if (time_before(jiffies, p_priv->tx_start_time[flip] + 10 * HZ))
break;
- this_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(this_urb);
break;
}
@@ -402,7 +399,6 @@ static int keyspan_write(struct usb_serial_port *port,
/* send the data out the bulk port */
this_urb->transfer_buffer_length = todo + dataOffset;
- this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
this_urb->dev = port->serial->dev;
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
dbg("usb_submit_urb(write bulk) failed (%d)", err);
@@ -1119,10 +1115,8 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp)
static inline void stop_urb(struct urb *urb)
{
- if (urb && urb->status == -EINPROGRESS) {
- urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ if (urb && urb->status == -EINPROGRESS)
usb_kill_urb(urb);
- }
}
static void keyspan_close(struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e925640..92d0f925d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -45,29 +45,29 @@
#include "usb-serial.h"
/* Function prototypes */
-static int option_open (struct usb_serial_port *port, struct file *filp);
-static void option_close (struct usb_serial_port *port, struct file *filp);
-static int option_startup (struct usb_serial *serial);
-static void option_shutdown (struct usb_serial *serial);
-static void option_rx_throttle (struct usb_serial_port *port);
-static void option_rx_unthrottle (struct usb_serial_port *port);
-static int option_write_room (struct usb_serial_port *port);
+static int option_open(struct usb_serial_port *port, struct file *filp);
+static void option_close(struct usb_serial_port *port, struct file *filp);
+static int option_startup(struct usb_serial *serial);
+static void option_shutdown(struct usb_serial *serial);
+static void option_rx_throttle(struct usb_serial_port *port);
+static void option_rx_unthrottle(struct usb_serial_port *port);
+static int option_write_room(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb, struct pt_regs *regs);
-static int option_write (struct usb_serial_port *port,
- const unsigned char *buf, int count);
+static int option_write(struct usb_serial_port *port,
+ const unsigned char *buf, int count);
-static int option_chars_in_buffer (struct usb_serial_port *port);
-static int option_ioctl (struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg);
-static void option_set_termios (struct usb_serial_port *port,
- struct termios *old);
-static void option_break_ctl (struct usb_serial_port *port, int break_state);
-static int option_tiocmget (struct usb_serial_port *port, struct file *file);
-static int option_tiocmset (struct usb_serial_port *port, struct file *file,
- unsigned int set, unsigned int clear);
-static int option_send_setup (struct usb_serial_port *port);
+static int option_chars_in_buffer(struct usb_serial_port *port);
+static int option_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static void option_set_termios(struct usb_serial_port *port,
+ struct termios *old);
+static void option_break_ctl(struct usb_serial_port *port, int break_state);
+static int option_tiocmget(struct usb_serial_port *port, struct file *file);
+static int option_tiocmset(struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear);
+static int option_send_setup(struct usb_serial_port *port);
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
@@ -76,7 +76,6 @@ static int option_send_setup (struct usb_serial_port *port);
#define OPTION_PRODUCT_FUSION 0x6000
#define OPTION_PRODUCT_FUSION2 0x6300
-
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
@@ -129,7 +128,6 @@ static int debug;
#define debug 0
#endif
-
/* per port private data */
#define N_IN_URB 4
@@ -156,10 +154,8 @@ struct option_port_private {
unsigned long tx_start_time[N_OUT_URB];
};
-
/* Functions used by new usb-serial code. */
-static int __init
-option_init (void)
+static int __init option_init(void)
{
int retval;
retval = usb_serial_register(&option_3port_device);
@@ -179,8 +175,7 @@ failed_3port_device_register:
return retval;
}
-static void __exit
-option_exit (void)
+static void __exit option_exit(void)
{
usb_deregister (&option_driver);
usb_serial_deregister (&option_3port_device);
@@ -189,39 +184,31 @@ option_exit (void)
module_init(option_init);
module_exit(option_exit);
-static void
-option_rx_throttle (struct usb_serial_port *port)
+static void option_rx_throttle(struct usb_serial_port *port)
{
dbg("%s", __FUNCTION__);
}
-
-static void
-option_rx_unthrottle (struct usb_serial_port *port)
+static void option_rx_unthrottle(struct usb_serial_port *port)
{
dbg("%s", __FUNCTION__);
}
-
-static void
-option_break_ctl (struct usb_serial_port *port, int break_state)
+static void option_break_ctl(struct usb_serial_port *port, int break_state)
{
/* Unfortunately, I don't know how to send a break */
dbg("%s", __FUNCTION__);
}
-
-static void
-option_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+static void option_set_termios(struct usb_serial_port *port,
+ struct termios *old_termios)
{
dbg("%s", __FUNCTION__);
option_send_setup(port);
}
-static int
-option_tiocmget (struct usb_serial_port *port, struct file *file)
+static int option_tiocmget(struct usb_serial_port *port, struct file *file)
{
unsigned int value;
struct option_port_private *portdata;
@@ -238,9 +225,8 @@ option_tiocmget (struct usb_serial_port *port, struct file *file)
return value;
}
-static int
-option_tiocmset (struct usb_serial_port *port, struct file *file,
- unsigned int set, unsigned int clear)
+static int option_tiocmset(struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
{
struct option_port_private *portdata;
@@ -258,17 +244,15 @@ option_tiocmset (struct usb_serial_port *port, struct file *file,
return option_send_setup(port);
}
-static int
-option_ioctl (struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg)
+static int option_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
return -ENOIOCTLCMD;
}
/* Write */
-static int
-option_write (struct usb_serial_port *port,
- const unsigned char *buf, int count)
+static int option_write(struct usb_serial_port *port,
+ const unsigned char *buf, int count)
{
struct option_port_private *portdata;
int i;
@@ -289,28 +273,29 @@ option_write (struct usb_serial_port *port,
this_urb = portdata->out_urbs[i];
if (this_urb->status == -EINPROGRESS) {
- if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
- continue;
- if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ))
+ if (time_before(jiffies,
+ portdata->tx_start_time[i] + 10 * HZ))
continue;
- this_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(this_urb);
continue;
}
if (this_urb->status != 0)
- dbg("usb_write %p failed (err=%d)", this_urb, this_urb->status);
+ dbg("usb_write %p failed (err=%d)",
+ this_urb, this_urb->status);
- dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i);
+ dbg("%s: endpoint %d buf %d", __FUNCTION__,
+ usb_pipeendpoint(this_urb->pipe), i);
/* send the data */
memcpy (this_urb->transfer_buffer, buf, todo);
this_urb->transfer_buffer_length = todo;
- this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err) {
- dbg("usb_submit_urb %p (write bulk) failed (%d, has %d)", this_urb, err, this_urb->status);
+ dbg("usb_submit_urb %p (write bulk) failed "
+ "(%d, has %d)", this_urb,
+ err, this_urb->status);
continue;
}
portdata->tx_start_time[i] = jiffies;
@@ -323,8 +308,7 @@ option_write (struct usb_serial_port *port,
return count;
}
-static void
-option_indat_callback (struct urb *urb, struct pt_regs *regs)
+static void option_indat_callback(struct urb *urb, struct pt_regs *regs)
{
int i, err;
int endpoint;
@@ -357,14 +341,14 @@ option_indat_callback (struct urb *urb, struct pt_regs *regs)
if (port->open_count && urb->status != -ESHUTDOWN) {
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
- printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err);
+ printk(KERN_ERR "%s: resubmit read urb failed. "
+ "(%d)", __FUNCTION__, err);
}
}
return;
}
-static void
-option_outdat_callback (struct urb *urb, struct pt_regs *regs)
+static void option_outdat_callback(struct urb *urb, struct pt_regs *regs)
{
struct usb_serial_port *port;
@@ -376,8 +360,7 @@ option_outdat_callback (struct urb *urb, struct pt_regs *regs)
schedule_work(&port->work);
}
-static void
-option_instat_callback (struct urb *urb, struct pt_regs *regs)
+static void option_instat_callback(struct urb *urb, struct pt_regs *regs)
{
int err;
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
@@ -395,10 +378,12 @@ option_instat_callback (struct urb *urb, struct pt_regs *regs)
dbg("%s: NULL req_pkt\n", __FUNCTION__);
return;
}
- if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) {
+ if ((req_pkt->bRequestType == 0xA1) &&
+ (req_pkt->bRequest == 0x20)) {
int old_dcd_state;
unsigned char signals = *((unsigned char *)
- urb->transfer_buffer + sizeof(struct usb_ctrlrequest));
+ urb->transfer_buffer +
+ sizeof(struct usb_ctrlrequest));
dbg("%s: signal x%x", __FUNCTION__, signals);
@@ -408,12 +393,13 @@ option_instat_callback (struct urb *urb, struct pt_regs *regs)
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
- if (port->tty && !C_CLOCAL(port->tty)
- && old_dcd_state && !portdata->dcd_state) {
+ if (port->tty && !C_CLOCAL(port->tty) &&
+ old_dcd_state && !portdata->dcd_state)
tty_hangup(port->tty);
- }
- } else
- dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest);
+ } else {
+ dbg("%s: type %x req %x", __FUNCTION__,
+ req_pkt->bRequestType,req_pkt->bRequest);
+ }
} else
dbg("%s: error %d", __FUNCTION__, urb->status);
@@ -422,13 +408,12 @@ option_instat_callback (struct urb *urb, struct pt_regs *regs)
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
- dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s: resubmit intr urb failed. (%d)",
+ __FUNCTION__, err);
}
}
-
-static int
-option_write_room (struct usb_serial_port *port)
+static int option_write_room(struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i;
@@ -447,9 +432,7 @@ option_write_room (struct usb_serial_port *port)
return data_len;
}
-
-static int
-option_chars_in_buffer (struct usb_serial_port *port)
+static int option_chars_in_buffer(struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i;
@@ -467,9 +450,7 @@ option_chars_in_buffer (struct usb_serial_port *port)
return data_len;
}
-
-static int
-option_open (struct usb_serial_port *port, struct file *filp)
+static int option_open(struct usb_serial_port *port, struct file *filp)
{
struct option_port_private *portdata;
struct usb_serial *serial = port->serial;
@@ -490,17 +471,21 @@ option_open (struct usb_serial_port *port, struct file *filp)
if (! urb)
continue;
if (urb->dev != serial->dev) {
- dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev);
+ dbg("%s: dev %p != %p", __FUNCTION__,
+ urb->dev, serial->dev);
continue;
}
- /* make sure endpoint data toggle is synchronized with the device */
-
+ /*
+ * make sure endpoint data toggle is synchronized with the
+ * device
+ */
usb_clear_halt(urb->dev, urb->pipe);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
- dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err,
+ dbg("%s: submit urb %d failed (%d) %d",
+ __FUNCTION__, i, err,
urb->transfer_buffer_length);
}
}
@@ -511,7 +496,8 @@ option_open (struct usb_serial_port *port, struct file *filp)
if (! urb)
continue;
urb->dev = serial->dev;
- /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
+ /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe), 0); */
}
port->tty->low_latency = 1;
@@ -521,17 +507,13 @@ option_open (struct usb_serial_port *port, struct file *filp)
return (0);
}
-static inline void
-stop_urb (struct urb *urb)
+static inline void stop_urb(struct urb *urb)
{
- if (urb && urb->status == -EINPROGRESS) {
- urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ if (urb && urb->status == -EINPROGRESS)
usb_kill_urb(urb);
- }
}
-static void
-option_close (struct usb_serial_port *port, struct file *filp)
+static void option_close(struct usb_serial_port *port, struct file *filp)
{
int i;
struct usb_serial *serial = port->serial;
@@ -555,12 +537,10 @@ option_close (struct usb_serial_port *port, struct file *filp)
port->tty = NULL;
}
-
/* Helper functions used by option_setup_urbs */
-static struct urb *
-option_setup_urb (struct usb_serial *serial, int endpoint,
- int dir, void *ctx, char *buf, int len,
- void (*callback)(struct urb *, struct pt_regs *regs))
+static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
+ int dir, void *ctx, char *buf, int len,
+ void (*callback)(struct urb *, struct pt_regs *regs))
{
struct urb *urb;
@@ -582,8 +562,7 @@ option_setup_urb (struct usb_serial *serial, int endpoint,
}
/* Setup urbs */
-static void
-option_setup_urbs (struct usb_serial *serial)
+static void option_setup_urbs(struct usb_serial *serial)
{
int j;
struct usb_serial_port *port;
@@ -609,9 +588,7 @@ option_setup_urbs (struct usb_serial *serial)
}
}
-
-static int
-option_send_setup (struct usb_serial_port *port)
+static int option_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
@@ -627,16 +604,15 @@ option_send_setup (struct usb_serial_port *port)
if (portdata->rts_state)
val |= 0x02;
- return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
}
return 0;
}
-
-static int
-option_startup (struct usb_serial *serial)
+static int option_startup(struct usb_serial *serial)
{
int i, err;
struct usb_serial_port *port;
@@ -647,9 +623,10 @@ option_startup (struct usb_serial *serial)
/* Now setup per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
- portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL);
+ portdata = kmalloc(sizeof(*portdata), GFP_KERNEL);
if (!portdata) {
- dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i);
+ dbg("%s: kmalloc for option_port_private (%d) failed!.",
+ __FUNCTION__, i);
return (1);
}
memset(portdata, 0, sizeof(struct option_port_private));
@@ -660,7 +637,8 @@ option_startup (struct usb_serial *serial)
continue;
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
- dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err);
+ dbg("%s: submit irq_in urb failed %d",
+ __FUNCTION__, err);
}
option_setup_urbs(serial);
@@ -668,8 +646,7 @@ option_startup (struct usb_serial *serial)
return (0);
}
-static void
-option_shutdown (struct usb_serial *serial)
+static void option_shutdown(struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 7eab5d4..3cf245b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -95,6 +95,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
+ { USB_DEVICE( NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
{ } /* Terminating entry */
};
@@ -538,8 +539,10 @@ static int pl2303_open (struct usb_serial_port *port, struct file *filp)
dbg("%s - port %d", __FUNCTION__, port->number);
- usb_clear_halt(serial->dev, port->write_urb->pipe);
- usb_clear_halt(serial->dev, port->read_urb->pipe);
+ if (priv->type != HX) {
+ usb_clear_halt(serial->dev, port->write_urb->pipe);
+ usb_clear_halt(serial->dev, port->read_urb->pipe);
+ }
buf = kmalloc(10, GFP_KERNEL);
if (buf==NULL)
@@ -650,8 +653,7 @@ static void pl2303_close (struct usb_serial_port *port, struct file *filp)
timeout = max((HZ*2560)/bps,HZ/10);
else
timeout = 2*HZ;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(timeout);
+ schedule_timeout_interruptible(timeout);
/* shutdown our urbs */
dbg("%s - shutting down urbs", __FUNCTION__);
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index b734c40..7be9644 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -58,3 +58,7 @@
#define SYNTECH_VENDOR_ID 0x0745
#define SYNTECH_PRODUCT_ID 0x0001
+
+/* Nokia CA-42 Cable */
+#define NOKIA_CA42_VENDOR_ID 0x078b
+#define NOKIA_CA42_PRODUCT_ID 0x1234
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 0267b26..e77fbdf 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -531,7 +531,7 @@ bailout_kref_put:
static void serial_close(struct tty_struct *tty, struct file * filp)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
if (!port)
return;
@@ -561,7 +561,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
int retval = -EINVAL;
dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count);
@@ -580,7 +580,7 @@ exit:
static int serial_write_room (struct tty_struct *tty)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
int retval = -EINVAL;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -599,7 +599,7 @@ exit:
static int serial_chars_in_buffer (struct tty_struct *tty)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
int retval = -EINVAL;
dbg("%s = port %d", __FUNCTION__, port->number);
@@ -618,7 +618,7 @@ exit:
static void serial_throttle (struct tty_struct * tty)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -634,7 +634,7 @@ static void serial_throttle (struct tty_struct * tty)
static void serial_unthrottle (struct tty_struct * tty)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -650,7 +650,7 @@ static void serial_unthrottle (struct tty_struct * tty)
static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
int retval = -ENODEV;
dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
@@ -672,7 +672,7 @@ exit:
static void serial_set_termios (struct tty_struct *tty, struct termios * old)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -688,7 +688,7 @@ static void serial_set_termios (struct tty_struct *tty, struct termios * old)
static void serial_break (struct tty_struct *tty, int break_state)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -749,7 +749,7 @@ done:
static int serial_tiocmget (struct tty_struct *tty, struct file *file)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -768,7 +768,7 @@ exit:
static int serial_tiocmset (struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -786,7 +786,7 @@ exit:
void usb_serial_port_softint(void *private)
{
- struct usb_serial_port *port = (struct usb_serial_port *)private;
+ struct usb_serial_port *port = private;
struct tty_struct *tty;
dbg("%s - port %d", __FUNCTION__, port->number);
OpenPOWER on IntegriCloud