summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/belkin_sa.c6
-rw-r--r--drivers/usb/serial/ch341.c46
-rw-r--r--drivers/usb/serial/console.c6
-rw-r--r--drivers/usb/serial/cp210x.c253
-rw-r--r--drivers/usb/serial/cyberjack.c6
-rw-r--r--drivers/usb/serial/cypress_m8.c81
-rw-r--r--drivers/usb/serial/digi_acceleport.c75
-rw-r--r--drivers/usb/serial/empeg.c6
-rw-r--r--drivers/usb/serial/ftdi_sio.c149
-rw-r--r--drivers/usb/serial/garmin_gps.c3
-rw-r--r--drivers/usb/serial/generic.c3
-rw-r--r--drivers/usb/serial/io_edgeport.c10
-rw-r--r--drivers/usb/serial/io_ti.c3
-rw-r--r--drivers/usb/serial/ipaq.c6
-rw-r--r--drivers/usb/serial/ipw.c18
-rw-r--r--drivers/usb/serial/ir-usb.c6
-rw-r--r--drivers/usb/serial/iuu_phoenix.c102
-rw-r--r--drivers/usb/serial/keyspan.c13
-rw-r--r--drivers/usb/serial/keyspan.h8
-rw-r--r--drivers/usb/serial/keyspan_pda.c48
-rw-r--r--drivers/usb/serial/kl5kusb105.c6
-rw-r--r--drivers/usb/serial/kobil_sct.c9
-rw-r--r--drivers/usb/serial/mct_u232.c37
-rw-r--r--drivers/usb/serial/mos7720.c3
-rw-r--r--drivers/usb/serial/mos7840.c48
-rw-r--r--drivers/usb/serial/navman.c3
-rw-r--r--drivers/usb/serial/omninet.c6
-rw-r--r--drivers/usb/serial/opticon.c3
-rw-r--r--drivers/usb/serial/option.c68
-rw-r--r--drivers/usb/serial/oti6858.c57
-rw-r--r--drivers/usb/serial/pl2303.c79
-rw-r--r--drivers/usb/serial/sierra.c351
-rw-r--r--drivers/usb/serial/spcp8x5.c85
-rw-r--r--drivers/usb/serial/symbolserial.c3
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c6
-rw-r--r--drivers/usb/serial/usb-serial.c144
-rw-r--r--drivers/usb/serial/visor.c6
-rw-r--r--drivers/usb/serial/whiteheat.c33
38 files changed, 902 insertions, 893 deletions
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index b7eacad..2bfd6dd 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -93,8 +93,7 @@ static int belkin_sa_startup(struct usb_serial *serial);
static void belkin_sa_shutdown(struct usb_serial *serial);
static int belkin_sa_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void belkin_sa_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void belkin_sa_close(struct usb_serial_port *port);
static void belkin_sa_read_int_callback(struct urb *urb);
static void belkin_sa_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios * old);
@@ -244,8 +243,7 @@ exit:
} /* belkin_sa_open */
-static void belkin_sa_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void belkin_sa_close(struct usb_serial_port *port)
{
dbg("%s port %d", __func__, port->number);
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index ab4cc27..2830766 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -262,32 +262,40 @@ error: kfree(priv);
return r;
}
-static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int ch341_carrier_raised(struct usb_serial_port *port)
+{
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ if (priv->line_status & CH341_BIT_DCD)
+ return 1;
+ return 0;
+}
+
+static void ch341_dtr_rts(struct usb_serial_port *port, int on)
{
struct ch341_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- unsigned int c_cflag;
dbg("%s - port %d", __func__, port->number);
+ /* drop DTR and RTS */
+ spin_lock_irqsave(&priv->lock, flags);
+ if (on)
+ priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
+ else
+ priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ch341_set_handshake(port->serial->dev, priv->line_control);
+ wake_up_interruptible(&priv->delta_msr_wait);
+}
+
+static void ch341_close(struct usb_serial_port *port)
+{
+ dbg("%s - port %d", __func__, port->number);
/* shutdown our urbs */
dbg("%s - shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
-
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop DTR and RTS */
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
- ch341_set_handshake(port->serial->dev, 0);
- }
- }
- wake_up_interruptible(&priv->delta_msr_wait);
}
@@ -302,7 +310,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
dbg("ch341_open()");
priv->baud_rate = DEFAULT_BAUD_RATE;
- priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
r = ch341_configure(serial->dev, priv);
if (r)
@@ -322,7 +329,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
if (r) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
" error %d\n", __func__, r);
- ch341_close(tty, port, NULL);
+ ch341_close(port);
return -EPROTO;
}
@@ -343,9 +350,6 @@ static void ch341_set_termios(struct tty_struct *tty,
dbg("ch341_set_termios()");
- if (!tty || !tty->termios)
- return;
-
baud_rate = tty_get_baud_rate(tty);
priv->baud_rate = baud_rate;
@@ -568,6 +572,8 @@ static struct usb_serial_driver ch341_device = {
.usb_driver = &ch341_driver,
.num_ports = 1,
.open = ch341_open,
+ .dtr_rts = ch341_dtr_rts,
+ .carrier_raised = ch341_carrier_raised,
.close = ch341_close,
.ioctl = ch341_ioctl,
.set_termios = ch341_set_termios,
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 19e2404..247b61b 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,7 +169,9 @@ static int usb_console_setup(struct console *co, char *options)
kfree(tty);
}
}
-
+ /* So we know not to kill the hardware on a hangup on this
+ port. We have also bumped the use count by one so it won't go
+ idle */
port->console = 1;
retval = 0;
@@ -182,7 +184,7 @@ free_tty:
kfree(tty);
reset_open_count:
port->port.count = 0;
-goto out;
+ goto out;
}
static void usb_console_write(struct console *co,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e8d5133..16a154d 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1,5 +1,5 @@
/*
- * Silicon Laboratories CP2101/CP2102 USB to RS232 serial adaptor driver
+ * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
*
* Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
*
@@ -27,44 +27,46 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.08"
-#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
+#define DRIVER_VERSION "v0.09"
+#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
/*
* Function Prototypes
*/
-static int cp2101_open(struct tty_struct *, struct usb_serial_port *,
+static int cp210x_open(struct tty_struct *, struct usb_serial_port *,
struct file *);
-static void cp2101_cleanup(struct usb_serial_port *);
-static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
- struct file*);
-static void cp2101_get_termios(struct tty_struct *,
+static void cp210x_cleanup(struct usb_serial_port *);
+static void cp210x_close(struct usb_serial_port *);
+static void cp210x_get_termios(struct tty_struct *,
struct usb_serial_port *port);
-static void cp2101_get_termios_port(struct usb_serial_port *port,
+static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp);
-static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
+static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
struct ktermios*);
-static int cp2101_tiocmget(struct tty_struct *, struct file *);
-static int cp2101_tiocmset(struct tty_struct *, struct file *,
+static int cp210x_tiocmget(struct tty_struct *, struct file *);
+static int cp210x_tiocmset(struct tty_struct *, struct file *,
unsigned int, unsigned int);
-static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *,
+static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
unsigned int, unsigned int);
-static void cp2101_break_ctl(struct tty_struct *, int);
-static int cp2101_startup(struct usb_serial *);
-static void cp2101_shutdown(struct usb_serial *);
+static void cp210x_break_ctl(struct tty_struct *, int);
+static int cp210x_startup(struct usb_serial *);
+static void cp210x_shutdown(struct usb_serial *);
static int debug;
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
+ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+ { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
@@ -85,10 +87,12 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+ { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
@@ -99,7 +103,9 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
+ { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
@@ -108,53 +114,70 @@ static struct usb_device_id id_table [] = {
MODULE_DEVICE_TABLE(usb, id_table);
-static struct usb_driver cp2101_driver = {
- .name = "cp2101",
+static struct usb_driver cp210x_driver = {
+ .name = "cp210x",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
.no_dynamic_id = 1,
};
-static struct usb_serial_driver cp2101_device = {
+static struct usb_serial_driver cp210x_device = {
.driver = {
.owner = THIS_MODULE,
- .name = "cp2101",
+ .name = "cp210x",
},
- .usb_driver = &cp2101_driver,
+ .usb_driver = &cp210x_driver,
.id_table = id_table,
.num_ports = 1,
- .open = cp2101_open,
- .close = cp2101_close,
- .break_ctl = cp2101_break_ctl,
- .set_termios = cp2101_set_termios,
- .tiocmget = cp2101_tiocmget,
- .tiocmset = cp2101_tiocmset,
- .attach = cp2101_startup,
- .shutdown = cp2101_shutdown,
+ .open = cp210x_open,
+ .close = cp210x_close,
+ .break_ctl = cp210x_break_ctl,
+ .set_termios = cp210x_set_termios,
+ .tiocmget = cp210x_tiocmget,
+ .tiocmset = cp210x_tiocmset,
+ .attach = cp210x_startup,
+ .shutdown = cp210x_shutdown,
};
/* Config request types */
#define REQTYPE_HOST_TO_DEVICE 0x41
#define REQTYPE_DEVICE_TO_HOST 0xc1
-/* Config SET requests. To GET, add 1 to the request number */
-#define CP2101_UART 0x00 /* Enable / Disable */
-#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */
-#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */
-#define CP2101_BREAK 0x05 /* On / Off */
-#define CP2101_CONTROL 0x07 /* Flow control line states */
-#define CP2101_MODEMCTL 0x13 /* Modem controls */
-#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */
-
-/* CP2101_UART */
+/* Config request codes */
+#define CP210X_IFC_ENABLE 0x00
+#define CP210X_SET_BAUDDIV 0x01
+#define CP210X_GET_BAUDDIV 0x02
+#define CP210X_SET_LINE_CTL 0x03
+#define CP210X_GET_LINE_CTL 0x04
+#define CP210X_SET_BREAK 0x05
+#define CP210X_IMM_CHAR 0x06
+#define CP210X_SET_MHS 0x07
+#define CP210X_GET_MDMSTS 0x08
+#define CP210X_SET_XON 0x09
+#define CP210X_SET_XOFF 0x0A
+#define CP210X_SET_EVENTMASK 0x0B
+#define CP210X_GET_EVENTMASK 0x0C
+#define CP210X_SET_CHAR 0x0D
+#define CP210X_GET_CHARS 0x0E
+#define CP210X_GET_PROPS 0x0F
+#define CP210X_GET_COMM_STATUS 0x10
+#define CP210X_RESET 0x11
+#define CP210X_PURGE 0x12
+#define CP210X_SET_FLOW 0x13
+#define CP210X_GET_FLOW 0x14
+#define CP210X_EMBED_EVENTS 0x15
+#define CP210X_GET_EVENTSTATE 0x16
+#define CP210X_SET_CHARS 0x19
+
+/* CP210X_IFC_ENABLE */
#define UART_ENABLE 0x0001
#define UART_DISABLE 0x0000
-/* CP2101_BAUDRATE */
+/* CP210X_(SET|GET)_BAUDDIV */
#define BAUD_RATE_GEN_FREQ 0x384000
-/* CP2101_BITS */
+/* CP210X_(SET|GET)_LINE_CTL */
#define BITS_DATA_MASK 0X0f00
#define BITS_DATA_5 0X0500
#define BITS_DATA_6 0X0600
@@ -174,11 +197,11 @@ static struct usb_serial_driver cp2101_device = {
#define BITS_STOP_1_5 0x0001
#define BITS_STOP_2 0x0002
-/* CP2101_BREAK */
+/* CP210X_SET_BREAK */
#define BREAK_ON 0x0000
#define BREAK_OFF 0x0001
-/* CP2101_CONTROL */
+/* CP210X_(SET_MHS|GET_MDMSTS) */
#define CONTROL_DTR 0x0001
#define CONTROL_RTS 0x0002
#define CONTROL_CTS 0x0010
@@ -189,13 +212,13 @@ static struct usb_serial_driver cp2101_device = {
#define CONTROL_WRITE_RTS 0x0200
/*
- * cp2101_get_config
- * Reads from the CP2101 configuration registers
+ * cp210x_get_config
+ * Reads from the CP210x configuration registers
* 'size' is specified in bytes.
* 'data' is a pointer to a pre-allocated array of integers large
* enough to hold 'size' bytes (with 4 bytes to each integer)
*/
-static int cp2101_get_config(struct usb_serial_port *port, u8 request,
+static int cp210x_get_config(struct usb_serial_port *port, u8 request,
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
@@ -211,9 +234,6 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
return -ENOMEM;
}
- /* For get requests, the request number must be incremented */
- request++;
-
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
request, REQTYPE_DEVICE_TO_HOST, 0x0000,
@@ -236,12 +256,12 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
}
/*
- * cp2101_set_config
- * Writes to the CP2101 configuration registers
+ * cp210x_set_config
+ * Writes to the CP210x configuration registers
* Values less than 16 bits wide are sent directly
* 'size' is specified in bytes.
*/
-static int cp2101_set_config(struct usb_serial_port *port, u8 request,
+static int cp210x_set_config(struct usb_serial_port *port, u8 request,
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
@@ -292,21 +312,21 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request,
}
/*
- * cp2101_set_config_single
- * Convenience function for calling cp2101_set_config on single data values
+ * cp210x_set_config_single
+ * Convenience function for calling cp210x_set_config on single data values
* without requiring an integer pointer
*/
-static inline int cp2101_set_config_single(struct usb_serial_port *port,
+static inline int cp210x_set_config_single(struct usb_serial_port *port,
u8 request, unsigned int data)
{
- return cp2101_set_config(port, request, &data, 2);
+ return cp210x_set_config(port, request, &data, 2);
}
/*
- * cp2101_quantise_baudrate
+ * cp210x_quantise_baudrate
* Quantises the baud rate as per AN205 Table 1
*/
-static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
+static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
if (baud <= 56) baud = 0;
else if (baud <= 300) baud = 300;
else if (baud <= 600) baud = 600;
@@ -343,7 +363,7 @@ static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
return baud;
}
-static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp)
{
struct usb_serial *serial = port->serial;
@@ -351,7 +371,7 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
dbg("%s - port %d", __func__, port->number);
- if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
+ if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
dev_err(&port->dev, "%s - Unable to enable UART\n",
__func__);
return -EPROTO;
@@ -373,17 +393,17 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
}
/* Configure the termios structure */
- cp2101_get_termios(tty, port);
+ cp210x_get_termios(tty, port);
/* Set the DTR and RTS pins low */
- cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
+ cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
: port,
NULL, TIOCM_DTR | TIOCM_RTS, 0);
return 0;
}
-static void cp2101_cleanup(struct usb_serial_port *port)
+static void cp210x_cleanup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
@@ -398,8 +418,7 @@ static void cp2101_cleanup(struct usb_serial_port *port)
}
}
-static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void cp210x_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
@@ -410,23 +429,23 @@ static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected)
- cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+ cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
mutex_unlock(&port->serial->disc_mutex);
}
/*
- * cp2101_get_termios
+ * cp210x_get_termios
* Reads the baud rate, data bits, parity, stop bits and flow control mode
* from the device, corrects any unsupported values, and configures the
* termios structure to reflect the state of the device
*/
-static void cp2101_get_termios(struct tty_struct *tty,
+static void cp210x_get_termios(struct tty_struct *tty,
struct usb_serial_port *port)
{
unsigned int baud;
if (tty) {
- cp2101_get_termios_port(tty->driver_data,
+ cp210x_get_termios_port(tty->driver_data,
&tty->termios->c_cflag, &baud);
tty_encode_baud_rate(tty, baud, baud);
}
@@ -434,15 +453,15 @@ static void cp2101_get_termios(struct tty_struct *tty,
else {
unsigned int cflag;
cflag = 0;
- cp2101_get_termios_port(port, &cflag, &baud);
+ cp210x_get_termios_port(port, &cflag, &baud);
}
}
/*
- * cp2101_get_termios_port
- * This is the heart of cp2101_get_termios which always uses a &usb_serial_port.
+ * cp210x_get_termios_port
+ * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
*/
-static void cp2101_get_termios_port(struct usb_serial_port *port,
+static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp)
{
unsigned int cflag, modem_ctl[4];
@@ -451,17 +470,17 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
dbg("%s - port %d", __func__, port->number);
- cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
+ cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
/* Convert to baudrate */
if (baud)
- baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
+ baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
dbg("%s - baud rate = %d", __func__, baud);
*baudp = baud;
cflag = *cflagp;
- cp2101_get_config(port, CP2101_BITS, &bits, 2);
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
cflag &= ~CSIZE;
switch (bits & BITS_DATA_MASK) {
case BITS_DATA_5:
@@ -486,14 +505,14 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
default:
dbg("%s - Unknown number of data bits, using 8", __func__);
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
}
@@ -516,20 +535,20 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
__func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
case BITS_PARITY_SPACE:
dbg("%s - parity = SPACE (not supported, disabling parity)",
__func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
default:
dbg("%s - Unknown parity mode, disabling parity", __func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
}
@@ -542,7 +561,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
__func__);
bits &= ~BITS_STOP_MASK;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
case BITS_STOP_2:
dbg("%s - stop bits = 2", __func__);
@@ -552,11 +571,11 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
dbg("%s - Unknown number of stop bits, using 1 stop bit",
__func__);
bits &= ~BITS_STOP_MASK;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
}
- cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
if (modem_ctl[0] & 0x0008) {
dbg("%s - flow control = CRTSCTS", __func__);
cflag |= CRTSCTS;
@@ -568,7 +587,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
*cflagp = cflag;
}
-static void cp2101_set_termios(struct tty_struct *tty,
+static void cp210x_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
unsigned int cflag, old_cflag;
@@ -583,13 +602,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
tty->termios->c_cflag &= ~CMSPAR;
cflag = tty->termios->c_cflag;
old_cflag = old_termios->c_cflag;
- baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty));
+ baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
/* If the baud rate is to be updated*/
if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
dbg("%s - Setting baud rate to %d baud", __func__,
baud);
- if (cp2101_set_config_single(port, CP2101_BAUDRATE,
+ if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
dbg("Baud rate requested not supported by device\n");
baud = tty_termios_baud_rate(old_termios);
@@ -600,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty,
/* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
- cp2101_get_config(port, CP2101_BITS, &bits, 2);
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
bits &= ~BITS_DATA_MASK;
switch (cflag & CSIZE) {
case CS5:
@@ -624,19 +643,19 @@ static void cp2101_set_termios(struct tty_struct *tty,
dbg("%s - data bits = 9", __func__);
break;*/
default:
- dbg("cp2101 driver does not "
+ dbg("cp210x driver does not "
"support the number of bits requested,"
" using 8 bit mode\n");
bits |= BITS_DATA_8;
break;
}
- if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+ if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
dbg("Number of data bits requested "
"not supported by device\n");
}
if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
- cp2101_get_config(port, CP2101_BITS, &bits, 2);
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
bits &= ~BITS_PARITY_MASK;
if (cflag & PARENB) {
if (cflag & PARODD) {
@@ -647,13 +666,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
dbg("%s - parity = EVEN", __func__);
}
}
- if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+ if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
dbg("Parity mode not supported "
"by device\n");
}
if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
- cp2101_get_config(port, CP2101_BITS, &bits, 2);
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
bits &= ~BITS_STOP_MASK;
if (cflag & CSTOPB) {
bits |= BITS_STOP_2;
@@ -662,13 +681,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
bits |= BITS_STOP_1;
dbg("%s - stop bits = 1", __func__);
}
- if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+ if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
dbg("Number of stop bits requested "
"not supported by device\n");
}
if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
- cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
__func__, modem_ctl[0], modem_ctl[1],
modem_ctl[2], modem_ctl[3]);
@@ -688,19 +707,19 @@ static void cp2101_set_termios(struct tty_struct *tty,
dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
__func__, modem_ctl[0], modem_ctl[1],
modem_ctl[2], modem_ctl[3]);
- cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
}
}
-static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
+static int cp210x_tiocmset (struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
- return cp2101_tiocmset_port(port, file, set, clear);
+ return cp210x_tiocmset_port(port, file, set, clear);
}
-static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
+static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear)
{
unsigned int control = 0;
@@ -726,10 +745,10 @@ static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
dbg("%s - control = 0x%.4x", __func__, control);
- return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
+ return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
}
-static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
+static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int control;
@@ -737,7 +756,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
dbg("%s - port %d", __func__, port->number);
- cp2101_get_config(port, CP2101_CONTROL, &control, 1);
+ cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
@@ -751,7 +770,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
return result;
}
-static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
+static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int state;
@@ -763,17 +782,17 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
state = BREAK_ON;
dbg("%s - turning break %s", __func__,
state == BREAK_OFF ? "off" : "on");
- cp2101_set_config(port, CP2101_BREAK, &state, 2);
+ cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
}
-static int cp2101_startup(struct usb_serial *serial)
+static int cp210x_startup(struct usb_serial *serial)
{
- /* CP2101 buffers behave strangely unless device is reset */
+ /* cp210x buffers behave strangely unless device is reset */
usb_reset_device(serial->dev);
return 0;
}
-static void cp2101_shutdown(struct usb_serial *serial)
+static void cp210x_shutdown(struct usb_serial *serial)
{
int i;
@@ -781,21 +800,21 @@ static void cp2101_shutdown(struct usb_serial *serial)
/* Stop reads and writes on all ports */
for (i = 0; i < serial->num_ports; ++i)
- cp2101_cleanup(serial->port[i]);
+ cp210x_cleanup(serial->port[i]);
}
-static int __init cp2101_init(void)
+static int __init cp210x_init(void)
{
int retval;
- retval = usb_serial_register(&cp2101_device);
+ retval = usb_serial_register(&cp210x_device);
if (retval)
return retval; /* Failed to register */
- retval = usb_register(&cp2101_driver);
+ retval = usb_register(&cp210x_driver);
if (retval) {
/* Failed to register */
- usb_serial_deregister(&cp2101_device);
+ usb_serial_deregister(&cp210x_device);
return retval;
}
@@ -805,14 +824,14 @@ static int __init cp2101_init(void)
return 0;
}
-static void __exit cp2101_exit(void)
+static void __exit cp210x_exit(void)
{
- usb_deregister(&cp2101_driver);
- usb_serial_deregister(&cp2101_device);
+ usb_deregister(&cp210x_driver);
+ usb_serial_deregister(&cp210x_device);
}
-module_init(cp2101_init);
-module_exit(cp2101_exit);
+module_init(cp210x_init);
+module_exit(cp210x_exit);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index dd501bb..933ba91 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -61,8 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial);
static void cyberjack_shutdown(struct usb_serial *serial);
static int cyberjack_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void cyberjack_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void cyberjack_close(struct usb_serial_port *port);
static int cyberjack_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count);
static int cyberjack_write_room(struct tty_struct *tty);
@@ -185,8 +184,7 @@ static int cyberjack_open(struct tty_struct *tty,
return result;
}
-static void cyberjack_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void cyberjack_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e568710..669f938 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -174,8 +174,8 @@ static int cypress_ca42v2_startup(struct usb_serial *serial);
static void cypress_shutdown(struct usb_serial *serial);
static int cypress_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void cypress_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void cypress_close(struct usb_serial_port *port);
+static void cypress_dtr_rts(struct usb_serial_port *port, int on);
static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static void cypress_send(struct usb_serial_port *port);
@@ -218,6 +218,7 @@ static struct usb_serial_driver cypress_earthmate_device = {
.shutdown = cypress_shutdown,
.open = cypress_open,
.close = cypress_close,
+ .dtr_rts = cypress_dtr_rts,
.write = cypress_write,
.write_room = cypress_write_room,
.ioctl = cypress_ioctl,
@@ -244,6 +245,7 @@ static struct usb_serial_driver cypress_hidcom_device = {
.shutdown = cypress_shutdown,
.open = cypress_open,
.close = cypress_close,
+ .dtr_rts = cypress_dtr_rts,
.write = cypress_write,
.write_room = cypress_write_room,
.ioctl = cypress_ioctl,
@@ -270,6 +272,7 @@ static struct usb_serial_driver cypress_ca42v2_device = {
.shutdown = cypress_shutdown,
.open = cypress_open,
.close = cypress_close,
+ .dtr_rts = cypress_dtr_rts,
.write = cypress_write,
.write_room = cypress_write_room,
.ioctl = cypress_ioctl,
@@ -656,11 +659,7 @@ static int cypress_open(struct tty_struct *tty,
priv->rx_flags = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- /* raise both lines and set termios */
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = CONTROL_DTR | CONTROL_RTS;
- priv->cmd_ctrl = 1;
- spin_unlock_irqrestore(&priv->lock, flags);
+ /* Set termios */
result = cypress_write(tty, port, NULL, 0);
if (result) {
@@ -694,76 +693,42 @@ static int cypress_open(struct tty_struct *tty,
__func__, result);
cypress_set_dead(port);
}
-
+ port->port.drain_delay = 256;
return result;
} /* cypress_open */
+static void cypress_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct cypress_private *priv = usb_get_serial_port_data(port);
+ /* drop dtr and rts */
+ priv = usb_get_serial_port_data(port);
+ spin_lock_irq(&priv->lock);
+ if (on == 0)
+ priv->line_control = 0;
+ else
+ priv->line_control = CONTROL_DTR | CONTROL_RTS;
+ priv->cmd_ctrl = 1;
+ spin_unlock_irq(&priv->lock);
+ cypress_write(NULL, port, NULL, 0);
+}
-static void cypress_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void cypress_close(struct usb_serial_port *port)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
- unsigned int c_cflag;
- int bps;
- long timeout;
- wait_queue_t wait;
dbg("%s - port %d", __func__, port->number);
- /* wait for data to drain from buffer */
- spin_lock_irq(&priv->lock);
- timeout = CYPRESS_CLOSING_WAIT;
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tty->write_wait, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (cypress_buf_data_avail(priv->buf) == 0
- || timeout == 0 || signal_pending(current)
- /* without mutex, allowed due to harmless failure mode */
- || port->serial->disconnected)
- break;
- spin_unlock_irq(&priv->lock);
- timeout = schedule_timeout(timeout);
- spin_lock_irq(&priv->lock);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tty->write_wait, &wait);
- /* clear out any remaining data in the buffer */
- cypress_buf_clear(priv->buf);
- spin_unlock_irq(&priv->lock);
-
/* writing is potentially harmful, lock must be taken */
mutex_lock(&port->serial->disc_mutex);
if (port->serial->disconnected) {
mutex_unlock(&port->serial->disc_mutex);
return;
}
- /* wait for characters to drain from device */
- if (tty) {
- bps = tty_get_baud_rate(tty);
- if (bps > 1200)
- timeout = max((HZ * 2560) / bps, HZ / 10);
- else
- timeout = 2 * HZ;
- schedule_timeout_interruptible(timeout);
- }
-
+ cypress_buf_clear(priv->buf);
dbg("%s - stopping urbs", __func__);
usb_kill_urb(port->interrupt_in_urb);
usb_kill_urb(port->interrupt_out_urb);
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop dtr and rts */
- priv = usb_get_serial_port_data(port);
- spin_lock_irq(&priv->lock);
- priv->line_control = 0;
- priv->cmd_ctrl = 1;
- spin_unlock_irq(&priv->lock);
- cypress_write(tty, port, NULL, 0);
- }
- }
if (stats)
dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 38ba4ea..30f5140 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -422,7 +422,6 @@ struct digi_port {
int dp_throttled;
int dp_throttle_restart;
wait_queue_head_t dp_flush_wait;
- int dp_in_close; /* close in progress */
wait_queue_head_t dp_close_wait; /* wait queue for close */
struct work_struct dp_wakeup_work;
struct usb_serial_port *dp_port;
@@ -456,8 +455,9 @@ static int digi_write_room(struct tty_struct *tty);
static int digi_chars_in_buffer(struct tty_struct *tty);
static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void digi_close(struct usb_serial_port *port);
+static int digi_carrier_raised(struct usb_serial_port *port);
+static void digi_dtr_rts(struct usb_serial_port *port, int on);
static int digi_startup_device(struct usb_serial *serial);
static int digi_startup(struct usb_serial *serial);
static void digi_shutdown(struct usb_serial *serial);
@@ -510,6 +510,8 @@ static struct usb_serial_driver digi_acceleport_2_device = {
.num_ports = 3,
.open = digi_open,
.close = digi_close,
+ .dtr_rts = digi_dtr_rts,
+ .carrier_raised = digi_carrier_raised,
.write = digi_write,
.write_room = digi_write_room,
.write_bulk_callback = digi_write_bulk_callback,
@@ -1328,6 +1330,19 @@ static int digi_chars_in_buffer(struct tty_struct *tty)
}
+static void digi_dtr_rts(struct usb_serial_port *port, int on)
+{
+ /* Adjust DTR and RTS */
+ digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
+}
+
+static int digi_carrier_raised(struct usb_serial_port *port)
+{
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ if (priv->dp_modem_signals & TIOCM_CD)
+ return 1;
+ return 0;
+}
static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp)
@@ -1336,7 +1351,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
unsigned char buf[32];
struct digi_port *priv = usb_get_serial_port_data(port);
struct ktermios not_termios;
- unsigned long flags = 0;
dbg("digi_open: TOP: port=%d, open_count=%d",
priv->dp_port_num, port->port.count);
@@ -1345,26 +1359,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
if (digi_startup_device(port->serial) != 0)
return -ENXIO;
- spin_lock_irqsave(&priv->dp_port_lock, flags);
-
- /* don't wait on a close in progress for non-blocking opens */
- if (priv->dp_in_close && (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) {
- spin_unlock_irqrestore(&priv->dp_port_lock, flags);
- return -EAGAIN;
- }
-
- /* wait for a close in progress to finish */
- while (priv->dp_in_close) {
- cond_wait_interruptible_timeout_irqrestore(
- &priv->dp_close_wait, DIGI_RETRY_TIMEOUT,
- &priv->dp_port_lock, flags);
- if (signal_pending(current))
- return -EINTR;
- spin_lock_irqsave(&priv->dp_port_lock, flags);
- }
-
- spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-
/* read modem signals automatically whenever they change */
buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
buf[1] = priv->dp_port_num;
@@ -1387,16 +1381,11 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
not_termios.c_iflag = ~tty->termios->c_iflag;
digi_set_termios(tty, port, &not_termios);
}
-
- /* set DTR and RTS */
- digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1);
-
return 0;
}
-static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void digi_close(struct usb_serial_port *port)
{
DEFINE_WAIT(wait);
int ret;
@@ -1411,28 +1400,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
if (port->serial->disconnected)
goto exit;
- /* do cleanup only after final close on this port */
- spin_lock_irq(&priv->dp_port_lock);
- priv->dp_in_close = 1;
- spin_unlock_irq(&priv->dp_port_lock);
-
- /* tell line discipline to process only XON/XOFF */
- tty->closing = 1;
-
- /* wait for output to drain */
- if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
- tty_wait_until_sent(tty, DIGI_CLOSE_TIMEOUT);
-
- /* flush driver and line discipline buffers */
- tty_driver_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
if (port->serial->dev) {
- /* wait for transmit idle */
- if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
- digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
- /* drop DTR and RTS */
- digi_set_modem_signals(port, 0, 0);
+ /* FIXME: Transmit idle belongs in the wait_unti_sent path */
+ digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
/* disable input flow control */
buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
@@ -1477,11 +1447,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
/* shutdown any outstanding bulk writes */
usb_kill_urb(port->write_urb);
}
- tty->closing = 0;
exit:
spin_lock_irq(&priv->dp_port_lock);
priv->dp_write_urb_in_use = 0;
- priv->dp_in_close = 0;
wake_up_interruptible(&priv->dp_close_wait);
spin_unlock_irq(&priv->dp_port_lock);
mutex_unlock(&port->serial->disc_mutex);
@@ -1560,7 +1528,6 @@ static int digi_startup(struct usb_serial *serial)
priv->dp_throttled = 0;
priv->dp_throttle_restart = 0;
init_waitqueue_head(&priv->dp_flush_wait);
- priv->dp_in_close = 0;
init_waitqueue_head(&priv->dp_close_wait);
INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
priv->dp_port = serial->port[i];
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index c709ec4..2b141cc 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -81,8 +81,7 @@ static int debug;
/* function prototypes for an empeg-car player */
static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void empeg_close(struct usb_serial_port *port);
static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf,
int count);
@@ -181,8 +180,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
}
-static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void empeg_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d9fcdae..683304d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -89,6 +89,7 @@ struct ftdi_private {
int force_rtscts; /* if non-zero, force RTS-CTS to always
be enabled */
+ unsigned int latency; /* latency setting in use */
spinlock_t tx_lock; /* spinlock for transmit state */
unsigned long tx_bytes;
unsigned long tx_outstanding_bytes;
@@ -719,8 +720,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port);
static int ftdi_sio_port_remove(struct usb_serial_port *port);
static int ftdi_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void ftdi_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void ftdi_close(struct usb_serial_port *port);
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int ftdi_write_room(struct tty_struct *tty);
@@ -758,6 +759,7 @@ static struct usb_serial_driver ftdi_sio_device = {
.port_remove = ftdi_sio_port_remove,
.open = ftdi_open,
.close = ftdi_close,
+ .dtr_rts = ftdi_dtr_rts,
.throttle = ftdi_throttle,
.unthrottle = ftdi_unthrottle,
.write = ftdi_write,
@@ -1037,7 +1039,54 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
return rv;
}
+static int write_latency_timer(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *udev = port->serial->dev;
+ char buf[1];
+ int rv = 0;
+ int l = priv->latency;
+
+ if (priv->flags & ASYNC_LOW_LATENCY)
+ l = 1;
+
+ dbg("%s: setting latency timer = %i", __func__, l);
+
+ rv = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+ l, priv->interface,
+ buf, 0, WDR_TIMEOUT);
+
+ if (rv < 0)
+ dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
+ return rv;
+}
+
+static int read_latency_timer(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *udev = port->serial->dev;
+ unsigned short latency = 0;
+ int rv = 0;
+
+ dbg("%s", __func__);
+
+ rv = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
+ 0, priv->interface,
+ (char *) &latency, 1, WDR_TIMEOUT);
+
+ if (rv < 0) {
+ dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
+ return -EIO;
+ }
+ return latency;
+}
static int get_serial_info(struct usb_serial_port *port,
struct serial_struct __user *retinfo)
@@ -1097,6 +1146,7 @@ static int set_serial_info(struct tty_struct *tty,
priv->custom_divisor = new_serial.custom_divisor;
tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ write_latency_timer(port);
check_and_exit:
if ((old_priv.flags & ASYNC_SPD_MASK) !=
@@ -1192,27 +1242,13 @@ static ssize_t show_latency_timer(struct device *dev,
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev = port->serial->dev;
- unsigned short latency = 0;
- int rv = 0;
-
-
- dbg("%s", __func__);
-
- rv = usb_control_msg(udev,
- usb_rcvctrlpipe(udev, 0),
- FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
- 0, priv->interface,
- (char *) &latency, 1, WDR_TIMEOUT);
-
- if (rv < 0) {
- dev_err(dev, "Unable to read latency timer: %i\n", rv);
- return -EIO;
- }
- return sprintf(buf, "%i\n", latency);
+ if (priv->flags & ASYNC_LOW_LATENCY)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "%i\n", priv->latency);
}
+
/* Write a new value of the latency timer, in units of milliseconds. */
static ssize_t store_latency_timer(struct device *dev,
struct device_attribute *attr, const char *valbuf,
@@ -1220,25 +1256,13 @@ static ssize_t store_latency_timer(struct device *dev,
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev = port->serial->dev;
- char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
- dbg("%s: setting latency timer = %i", __func__, v);
-
- rv = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
- v, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
- if (rv < 0) {
- dev_err(dev, "Unable to write latency timer: %i\n", rv);
+ priv->latency = v;
+ rv = write_latency_timer(port);
+ if (rv < 0)
return -EIO;
- }
-
return count;
}
@@ -1392,6 +1416,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
usb_set_serial_port_data(port, priv);
ftdi_determine_type(port);
+ read_latency_timer(port);
create_sysfs_attrs(port);
return 0;
}
@@ -1514,6 +1539,8 @@ static int ftdi_open(struct tty_struct *tty,
if (tty)
tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ write_latency_timer(port);
+
/* No error checking for this (will get errors later anyway) */
/* See ftdi_sio.h for description of what is reset */
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -1529,11 +1556,6 @@ static int ftdi_open(struct tty_struct *tty,
if (tty)
ftdi_set_termios(tty, port, tty->termios);
- /* FIXME: Flow control might be enabled, so it should be checked -
- we have no control of defaults! */
- /* Turn on RTS and DTR since we are not flow controlling by default */
- set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-
/* Not throttled */
spin_lock_irqsave(&priv->rx_lock, flags);
priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
@@ -1558,6 +1580,30 @@ static int ftdi_open(struct tty_struct *tty,
} /* ftdi_open */
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ char buf[1];
+
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected) {
+ /* Disable flow control */
+ if (!on && usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+ 0, priv->interface, buf, 0,
+ WDR_TIMEOUT) < 0) {
+ dev_err(&port->dev, "error from flowcontrol urb\n");
+ }
+ /* drop RTS and DTR */
+ if (on)
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ else
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ }
+ mutex_unlock(&port->serial->disc_mutex);
+}
/*
* usbserial:__serial_close only calls ftdi_close if the point is open
@@ -1567,31 +1613,12 @@ static int ftdi_open(struct tty_struct *tty,
*
*/
-static void ftdi_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void ftdi_close(struct usb_serial_port *port)
{ /* ftdi_close */
- unsigned int c_cflag = tty->termios->c_cflag;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char buf[1];
dbg("%s", __func__);
- mutex_lock(&port->serial->disc_mutex);
- if (c_cflag & HUPCL && !port->serial->disconnected) {
- /* Disable flow control */
- if (usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- FTDI_SIO_SET_FLOW_CTRL_REQUEST,
- FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0, priv->interface, buf, 0,
- WDR_TIMEOUT) < 0) {
- dev_err(&port->dev, "error from flowcontrol urb\n");
- }
-
- /* drop RTS and DTR */
- clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
- } /* Note change no line if hupcl is off */
- mutex_unlock(&port->serial->disc_mutex);
/* cancel any scheduled reading */
cancel_delayed_work_sync(&priv->rx_work);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 586d30f..ee25a3f 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -993,8 +993,7 @@ static int garmin_open(struct tty_struct *tty,
}
-static void garmin_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void garmin_close(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 4cec990..be82ea9 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -184,8 +184,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
}
EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
-void usb_serial_generic_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+void usb_serial_generic_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
generic_cleanup(port);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index fb4a73d..53ef599 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -207,8 +207,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb);
/* function prototypes for the usbserial callbacks */
static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void edge_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void edge_close(struct usb_serial_port *port);
static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int edge_write_room(struct tty_struct *tty);
@@ -965,7 +964,7 @@ static int edge_open(struct tty_struct *tty,
if (!edge_port->txfifo.fifo) {
dbg("%s - no memory", __func__);
- edge_close(tty, port, filp);
+ edge_close(port);
return -ENOMEM;
}
@@ -975,7 +974,7 @@ static int edge_open(struct tty_struct *tty,
if (!edge_port->write_urb) {
dbg("%s - no memory", __func__);
- edge_close(tty, port, filp);
+ edge_close(port);
return -ENOMEM;
}
@@ -1099,8 +1098,7 @@ static void block_until_tx_empty(struct edgeport_port *edge_port)
* edge_close
* this function is called by the tty driver when a port is closed
*****************************************************************************/
-static void edge_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
{
struct edgeport_serial *edge_serial;
struct edgeport_port *edge_port;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 513b25e..eabf20e 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2009,8 +2009,7 @@ release_es_lock:
return status;
}
-static void edge_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
{
struct edgeport_serial *edge_serial;
struct edgeport_port *edge_port;
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index cd62825..c610a99 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -76,8 +76,7 @@ static int initial_wait;
/* Function prototypes for an ipaq */
static int ipaq_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void ipaq_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void ipaq_close(struct usb_serial_port *port);
static int ipaq_calc_num_ports(struct usb_serial *serial);
static int ipaq_startup(struct usb_serial *serial);
static void ipaq_shutdown(struct usb_serial *serial);
@@ -714,8 +713,7 @@ error:
}
-static void ipaq_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void ipaq_close(struct usb_serial_port *port)
{
struct ipaq_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index da2a2b4..29ad038 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -302,23 +302,17 @@ static int ipw_open(struct tty_struct *tty,
return 0;
}
-static void ipw_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void ipw_dtr_rts(struct usb_serial_port *port, int on)
{
struct usb_device *dev = port->serial->dev;
int result;
- if (tty_hung_up_p(filp)) {
- dbg("%s: tty_hung_up_p ...", __func__);
- return;
- }
-
/*--1: drop the dtr */
dbg("%s:dropping dtr", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_PIN_CLRDTR,
+ on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR,
0,
NULL,
0,
@@ -332,7 +326,7 @@ static void ipw_close(struct tty_struct *tty,
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_PIN_CLRRTS,
+ on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
0,
NULL,
0,
@@ -340,7 +334,12 @@ static void ipw_close(struct tty_struct *tty,
if (result < 0)
dev_err(&port->dev,
"dropping rts failed (error = %d)\n", result);
+}
+static void ipw_close(struct usb_serial_port *port)
+{
+ struct usb_device *dev = port->serial->dev;
+ int result;
/*--3: purge */
dbg("%s:sending purge", __func__);
@@ -461,6 +460,7 @@ static struct usb_serial_driver ipw_device = {
.num_ports = 1,
.open = ipw_open,
.close = ipw_close,
+ .dtr_rts = ipw_dtr_rts,
.port_probe = ipw_probe,
.port_remove = ipw_disconnect,
.write = ipw_write,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 4e2cda9..66009b6 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -88,8 +88,7 @@ static int xbof = -1;
static int ir_startup (struct usb_serial *serial);
static int ir_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filep);
-static void ir_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filep);
+static void ir_close(struct usb_serial_port *port);
static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static void ir_write_bulk_callback (struct urb *urb);
@@ -346,8 +345,7 @@ static int ir_open(struct tty_struct *tty,
return result;
}
-static void ir_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file * filp)
+static void ir_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 4473d44..76a3cc3 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -40,7 +40,7 @@ static int debug;
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.5"
+#define DRIVER_VERSION "v0.10"
#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
static struct usb_device_id id_table[] = {
@@ -70,7 +70,6 @@ static void read_rxcmd_callback(struct urb *urb);
struct iuu_private {
spinlock_t lock; /* store irq state */
wait_queue_head_t delta_msr_wait;
- u8 line_control;
u8 line_status;
u8 termios_initialized;
int tiostatus; /* store IUART SIGNAL for tiocmget call */
@@ -651,32 +650,33 @@ static int iuu_bulk_write(struct usb_serial_port *port)
unsigned long flags;
int result;
int i;
+ int buf_len;
char *buf_ptr = port->write_urb->transfer_buffer;
dbg("%s - enter", __func__);
+ spin_lock_irqsave(&priv->lock, flags);
*buf_ptr++ = IUU_UART_ESC;
*buf_ptr++ = IUU_UART_TX;
*buf_ptr++ = priv->writelen;
- memcpy(buf_ptr, priv->writebuf,
- priv->writelen);
+ memcpy(buf_ptr, priv->writebuf, priv->writelen);
+ buf_len = priv->writelen;
+ priv->writelen = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
if (debug == 1) {
- for (i = 0; i < priv->writelen; i++)
+ for (i = 0; i < buf_len; i++)
sprintf(priv->dbgbuf + i*2 ,
"%02X", priv->writebuf[i]);
- priv->dbgbuf[priv->writelen+i*2] = 0;
+ priv->dbgbuf[buf_len+i*2] = 0;
dbg("%s - writing %i chars : %s", __func__,
- priv->writelen, priv->dbgbuf);
+ buf_len, priv->dbgbuf);
}
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
- port->write_urb->transfer_buffer, priv->writelen + 3,
+ port->write_urb->transfer_buffer, buf_len + 3,
iuu_rxcmd, port);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
- spin_lock_irqsave(&priv->lock, flags);
- priv->writelen = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
usb_serial_port_softint(port);
return result;
}
@@ -770,14 +770,10 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
return -ENOMEM;
spin_lock_irqsave(&priv->lock, flags);
- if (priv->writelen > 0) {
- /* buffer already filled but not commited */
- spin_unlock_irqrestore(&priv->lock, flags);
- return 0;
- }
+
/* fill the buffer */
- memcpy(priv->writebuf, buf, count);
- priv->writelen = count;
+ memcpy(priv->writebuf + priv->writelen, buf, count);
+ priv->writelen += count;
spin_unlock_irqrestore(&priv->lock, flags);
return count;
@@ -819,7 +815,7 @@ static int iuu_uart_on(struct usb_serial_port *port)
buf[0] = IUU_UART_ENABLE;
buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF);
buf[2] = (u8) (0x00FF & IUU_BAUD_9600);
- buf[3] = (u8) (0x0F0 & IUU_TWO_STOP_BITS) | (0x07 & IUU_PARITY_EVEN);
+ buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN);
status = bulk_immediate(port, buf, 4);
if (status != IUU_OPERATION_OK) {
@@ -946,19 +942,59 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud,
return status;
}
-static int set_control_lines(struct usb_device *dev, u8 value)
+static void iuu_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
{
- return 0;
+ const u32 supported_mask = CMSPAR|PARENB|PARODD;
+
+ unsigned int cflag = tty->termios->c_cflag;
+ int status;
+ u32 actual;
+ u32 parity;
+ int csize = CS7;
+ int baud = 9600; /* Fixed for the moment */
+ u32 newval = cflag & supported_mask;
+
+ /* compute the parity parameter */
+ parity = 0;
+ if (cflag & CMSPAR) { /* Using mark space */
+ if (cflag & PARODD)
+ parity |= IUU_PARITY_SPACE;
+ else
+ parity |= IUU_PARITY_MARK;
+ } else if (!(cflag & PARENB)) {
+ parity |= IUU_PARITY_NONE;
+ csize = CS8;
+ } else if (cflag & PARODD)
+ parity |= IUU_PARITY_ODD;
+ else
+ parity |= IUU_PARITY_EVEN;
+
+ parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT);
+
+ /* set it */
+ status = iuu_uart_baud(port,
+ (clockmode == 2) ? 16457 : 9600 * boost / 100,
+ &actual, parity);
+
+ /* set the termios value to the real one, so the user now what has
+ * changed. We support few fields so its easies to copy the old hw
+ * settings back over and then adjust them
+ */
+ if (old_termios)
+ tty_termios_copy_hw(tty->termios, old_termios);
+ if (status != 0) /* Set failed - return old bits */
+ return;
+ /* Re-encode speed, parity and csize */
+ tty_encode_baud_rate(tty, baud, baud);
+ tty->termios->c_cflag &= ~(supported_mask|CSIZE);
+ tty->termios->c_cflag |= newval | csize;
}
-static void iuu_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void iuu_close(struct usb_serial_port *port)
{
/* iuu_led (port,255,0,0,0); */
struct usb_serial *serial;
- struct iuu_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
- unsigned int c_cflag;
serial = port->serial;
if (!serial)
@@ -968,17 +1004,6 @@ static void iuu_close(struct tty_struct *tty,
iuu_uart_off(port);
if (serial->dev) {
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop DTR and RTS */
- priv = usb_get_serial_port_data(port);
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
- set_control_lines(port->serial->dev, 0);
- }
- }
/* free writebuf */
/* shutdown our urbs */
dbg("%s - shutting down urbs", __func__);
@@ -1154,7 +1179,7 @@ static int iuu_open(struct tty_struct *tty,
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
" error %d\n", __func__, result);
- iuu_close(tty, port, NULL);
+ iuu_close(port);
return -EPROTO;
} else {
dbg("%s - rxcmd OK", __func__);
@@ -1175,6 +1200,7 @@ static struct usb_serial_driver iuu_device = {
.read_bulk_callback = iuu_uart_read_callback,
.tiocmget = iuu_tiocmget,
.tiocmset = iuu_tiocmset,
+ .set_termios = iuu_set_termios,
.attach = iuu_startup,
.shutdown = iuu_shutdown,
};
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 00daa8f..f1195a9 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1298,8 +1298,16 @@ static inline void stop_urb(struct urb *urb)
usb_kill_urb(urb);
}
-static void keyspan_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+
+ p_priv->rts_state = on;
+ p_priv->dtr_state = on;
+ keyspan_send_setup(port, 0);
+}
+
+static void keyspan_close(struct usb_serial_port *port)
{
int i;
struct usb_serial *serial = port->serial;
@@ -1336,7 +1344,6 @@ static void keyspan_close(struct tty_struct *tty,
stop_urb(p_priv->out_urbs[i]);
}
}
- tty_port_tty_set(&port->port, NULL);
}
/* download the firmware to a pre-renumeration device */
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 38b4582..0d4569b 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -38,9 +38,8 @@
static int keyspan_open (struct tty_struct *tty,
struct usb_serial_port *port,
struct file *filp);
-static void keyspan_close (struct tty_struct *tty,
- struct usb_serial_port *port,
- struct file *filp);
+static void keyspan_close (struct usb_serial_port *port);
+static void keyspan_dtr_rts (struct usb_serial_port *port, int on);
static int keyspan_startup (struct usb_serial *serial);
static void keyspan_shutdown (struct usb_serial *serial);
static int keyspan_write_room (struct tty_struct *tty);
@@ -562,6 +561,7 @@ static struct usb_serial_driver keyspan_1port_device = {
.num_ports = 1,
.open = keyspan_open,
.close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
.write = keyspan_write,
.write_room = keyspan_write_room,
.set_termios = keyspan_set_termios,
@@ -582,6 +582,7 @@ static struct usb_serial_driver keyspan_2port_device = {
.num_ports = 2,
.open = keyspan_open,
.close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
.write = keyspan_write,
.write_room = keyspan_write_room,
.set_termios = keyspan_set_termios,
@@ -602,6 +603,7 @@ static struct usb_serial_driver keyspan_4port_device = {
.num_ports = 4,
.open = keyspan_open,
.close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
.write = keyspan_write,
.write_room = keyspan_write_room,
.set_termios = keyspan_set_termios,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index bf1ae24..ab769db 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -651,6 +651,35 @@ static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
}
+static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct usb_serial *serial = port->serial;
+
+ if (serial->dev) {
+ if (on)
+ keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2));
+ else
+ keyspan_pda_set_modem_info(serial, 0);
+ }
+}
+
+static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ unsigned char modembits;
+
+ /* If we can read the modem status and the DCD is low then
+ carrier is not raised yet */
+ if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) {
+ if (!(modembits & (1>>6)))
+ return 0;
+ }
+ /* Carrier raised, or we failed (eg disconnected) so
+ progress accordingly */
+ return 1;
+}
+
+
static int keyspan_pda_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
@@ -682,13 +711,6 @@ static int keyspan_pda_open(struct tty_struct *tty,
priv->tx_room = room;
priv->tx_throttled = room ? 0 : 1;
- /* the normal serial device seems to always turn on DTR and RTS here,
- so do the same */
- if (tty && (tty->termios->c_cflag & CBAUD))
- keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2));
- else
- keyspan_pda_set_modem_info(serial, 0);
-
/*Start reading from the device*/
port->interrupt_in_urb->dev = serial->dev;
rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
@@ -700,19 +722,11 @@ static int keyspan_pda_open(struct tty_struct *tty,
error:
return rc;
}
-
-
-static void keyspan_pda_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void keyspan_pda_close(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
if (serial->dev) {
- /* the normal serial device seems to always shut
- off DTR and RTS now */
- if (tty->termios->c_cflag & HUPCL)
- keyspan_pda_set_modem_info(serial, 0);
-
/* shutdown our bulk reads and writes */
usb_kill_urb(port->write_urb);
usb_kill_urb(port->interrupt_in_urb);
@@ -839,6 +853,8 @@ static struct usb_serial_driver keyspan_pda_device = {
.usb_driver = &keyspan_pda_driver,
.id_table = id_table_std,
.num_ports = 1,
+ .dtr_rts = keyspan_pda_dtr_rts,
+ .carrier_raised = keyspan_pda_carrier_raised,
.open = keyspan_pda_open,
.close = keyspan_pda_close,
.write = keyspan_pda_write,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index fcd9082..fa817c6 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -76,8 +76,7 @@ static int klsi_105_startup(struct usb_serial *serial);
static void klsi_105_shutdown(struct usb_serial *serial);
static int klsi_105_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void klsi_105_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void klsi_105_close(struct usb_serial_port *port);
static int klsi_105_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count);
static void klsi_105_write_bulk_callback(struct urb *urb);
@@ -447,8 +446,7 @@ exit:
} /* klsi_105_open */
-static void klsi_105_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void klsi_105_close(struct usb_serial_port *port)
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
int rc;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index c148544..6b57049 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -72,8 +72,7 @@ static int kobil_startup(struct usb_serial *serial);
static void kobil_shutdown(struct usb_serial *serial);
static int kobil_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void kobil_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void kobil_close(struct usb_serial_port *port);
static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int kobil_write_room(struct tty_struct *tty);
@@ -209,7 +208,7 @@ static void kobil_shutdown(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
while (serial->port[i]->port.count > 0)
- kobil_close(NULL, serial->port[i], NULL);
+ kobil_close(serial->port[i]);
kfree(usb_get_serial_port_data(serial->port[i]));
usb_set_serial_port_data(serial->port[i], NULL);
}
@@ -346,11 +345,11 @@ static int kobil_open(struct tty_struct *tty,
}
-static void kobil_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void kobil_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
+ /* FIXME: Add rts/dtr methods */
if (port->write_urb) {
usb_kill_urb(port->write_urb);
usb_free_urb(port->write_urb);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 82930a7..8737955 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -95,8 +95,8 @@ static int mct_u232_startup(struct usb_serial *serial);
static void mct_u232_shutdown(struct usb_serial *serial);
static int mct_u232_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void mct_u232_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void mct_u232_close(struct usb_serial_port *port);
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
static void mct_u232_read_int_callback(struct urb *urb);
static void mct_u232_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
@@ -140,6 +140,7 @@ static struct usb_serial_driver mct_u232_device = {
.num_ports = 1,
.open = mct_u232_open,
.close = mct_u232_close,
+ .dtr_rts = mct_u232_dtr_rts,
.throttle = mct_u232_throttle,
.unthrottle = mct_u232_unthrottle,
.read_int_callback = mct_u232_read_int_callback,
@@ -496,29 +497,29 @@ error:
return retval;
} /* mct_u232_open */
-
-static void mct_u232_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
{
- unsigned int c_cflag;
unsigned int control_state;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- dbg("%s port %d", __func__, port->number);
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- mutex_lock(&port->serial->disc_mutex);
- if (c_cflag & HUPCL && !port->serial->disconnected) {
- /* drop DTR and RTS */
- spin_lock_irq(&priv->lock);
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected) {
+ /* drop DTR and RTS */
+ spin_lock_irq(&priv->lock);
+ if (on)
+ priv->control_state |= TIOCM_DTR | TIOCM_RTS;
+ else
priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
- control_state = priv->control_state;
- spin_unlock_irq(&priv->lock);
- mct_u232_set_modem_ctrl(port->serial, control_state);
- }
- mutex_unlock(&port->serial->disc_mutex);
+ control_state = priv->control_state;
+ spin_unlock_irq(&priv->lock);
+ mct_u232_set_modem_ctrl(port->serial, control_state);
}
+ mutex_unlock(&port->serial->disc_mutex);
+}
+static void mct_u232_close(struct usb_serial_port *port)
+{
+ dbg("%s port %d", __func__, port->number);
if (port->serial->dev) {
/* shutdown our urbs */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 24e3b5d..9e1a013 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -533,8 +533,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty)
return chars;
}
-static void mos7720_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void mos7720_close(struct usb_serial_port *port)
{
struct usb_serial *serial;
struct moschip_port *mos7720_port;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 84fb1dc..10b78a3 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1135,54 +1135,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
}
-/************************************************************************
- *
- * mos7840_block_until_tx_empty
- *
- * This function will block the close until one of the following:
- * 1. TX count are 0
- * 2. The mos7840 has stopped
- * 3. A timeout of 3 seconds without activity has expired
- *
- ************************************************************************/
-static void mos7840_block_until_tx_empty(struct tty_struct *tty,
- struct moschip_port *mos7840_port)
-{
- int timeout = HZ / 10;
- int wait = 30;
- int count;
-
- while (1) {
-
- count = mos7840_chars_in_buffer(tty);
-
- /* Check for Buffer status */
- if (count <= 0)
- return;
-
- /* Block the thread for a while */
- interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
- timeout);
-
- /* No activity.. count down section */
- wait--;
- if (wait == 0) {
- dbg("%s - TIMEOUT", __func__);
- return;
- } else {
- /* Reset timeout value back to seconds */
- wait = 30;
- }
- }
-}
-
/*****************************************************************************
* mos7840_close
* this function is called by the tty driver when a port is closed
*****************************************************************************/
-static void mos7840_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void mos7840_close(struct usb_serial_port *port)
{
struct usb_serial *serial;
struct moschip_port *mos7840_port;
@@ -1223,10 +1181,6 @@ static void mos7840_close(struct tty_struct *tty,
}
}
- if (serial->dev)
- /* flush and block until tx is empty */
- mos7840_block_until_tx_empty(tty, mos7840_port);
-
/* While closing port, shutdown all bulk read, write *
* and interrupt read if they exists */
if (serial->dev) {
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index bcdcbb8..f5f3751a8 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -98,8 +98,7 @@ static int navman_open(struct tty_struct *tty,
return result;
}
-static void navman_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void navman_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index df65397..1104617 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -66,8 +66,7 @@ static int debug;
/* function prototypes */
static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void omninet_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void omninet_close(struct usb_serial_port *port);
static void omninet_read_bulk_callback(struct urb *urb);
static void omninet_write_bulk_callback(struct urb *urb);
static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -189,8 +188,7 @@ static int omninet_open(struct tty_struct *tty,
return result;
}
-static void omninet_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void omninet_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
usb_kill_urb(port->read_urb);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index b500ad1..c20480a 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -173,8 +173,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
return result;
}
-static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void opticon_close(struct usb_serial_port *port)
{
struct opticon_private *priv = usb_get_serial_data(port->serial);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 7817b82..a16d69f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -45,8 +45,9 @@
/* Function prototypes */
static int option_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void option_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void option_close(struct usb_serial_port *port);
+static void option_dtr_rts(struct usb_serial_port *port, int on);
+
static int option_startup(struct usb_serial *serial);
static void option_shutdown(struct usb_serial *serial);
static int option_write_room(struct tty_struct *tty);
@@ -61,7 +62,7 @@ static void option_set_termios(struct tty_struct *tty,
static int option_tiocmget(struct tty_struct *tty, struct file *file);
static int option_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
-static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
+static int option_send_setup(struct usb_serial_port *port);
static int option_suspend(struct usb_serial *serial, pm_message_t message);
static int option_resume(struct usb_serial *serial);
@@ -551,6 +552,7 @@ static struct usb_serial_driver option_1port_device = {
.num_ports = 1,
.open = option_open,
.close = option_close,
+ .dtr_rts = option_dtr_rts,
.write = option_write,
.write_room = option_write_room,
.chars_in_buffer = option_chars_in_buffer,
@@ -630,7 +632,7 @@ static void option_set_termios(struct tty_struct *tty,
dbg("%s", __func__);
/* Doesn't support option setting */
tty_termios_copy_hw(tty->termios, old_termios);
- option_send_setup(tty, port);
+ option_send_setup(port);
}
static int option_tiocmget(struct tty_struct *tty, struct file *file)
@@ -669,7 +671,7 @@ static int option_tiocmset(struct tty_struct *tty, struct file *file,
portdata->rts_state = 0;
if (clear & TIOCM_DTR)
portdata->dtr_state = 0;
- return option_send_setup(tty, port);
+ return option_send_setup(port);
}
/* Write */
@@ -897,10 +899,6 @@ static int option_open(struct tty_struct *tty,
dbg("%s", __func__);
- /* Set some sane defaults */
- portdata->rts_state = 1;
- portdata->dtr_state = 1;
-
/* Reset low level data toggle and start reading from endpoints */
for (i = 0; i < N_IN_URB; i++) {
urb = portdata->in_urbs[i];
@@ -936,37 +934,43 @@ static int option_open(struct tty_struct *tty,
usb_pipeout(urb->pipe), 0); */
}
- option_send_setup(tty, port);
+ option_send_setup(port);
return 0;
}
-static void option_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void option_dtr_rts(struct usb_serial_port *port, int on)
{
- int i;
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
dbg("%s", __func__);
portdata = usb_get_serial_port_data(port);
+ mutex_lock(&serial->disc_mutex);
+ portdata->rts_state = on;
+ portdata->dtr_state = on;
+ if (serial->dev)
+ option_send_setup(port);
+ mutex_unlock(&serial->disc_mutex);
+}
- portdata->rts_state = 0;
- portdata->dtr_state = 0;
- if (serial->dev) {
- mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
- option_send_setup(tty, port);
- mutex_unlock(&serial->disc_mutex);
+static void option_close(struct usb_serial_port *port)
+{
+ int i;
+ struct usb_serial *serial = port->serial;
+ struct option_port_private *portdata;
+
+ dbg("%s", __func__);
+ portdata = usb_get_serial_port_data(port);
+ if (serial->dev) {
/* Stop reading/writing urbs */
for (i = 0; i < N_IN_URB; i++)
usb_kill_urb(portdata->in_urbs[i]);
for (i = 0; i < N_OUT_URB; i++)
usb_kill_urb(portdata->out_urbs[i]);
}
- tty_port_tty_set(&port->port, NULL);
}
/* Helper functions used by option_setup_urbs */
@@ -1032,28 +1036,24 @@ static void option_setup_urbs(struct usb_serial *serial)
* This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
* CDC.
*/
-static int option_send_setup(struct tty_struct *tty,
- struct usb_serial_port *port)
+static int option_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+ int val = 0;
dbg("%s", __func__);
portdata = usb_get_serial_port_data(port);
- if (tty) {
- int val = 0;
- if (portdata->dtr_state)
- val |= 0x01;
- if (portdata->rts_state)
- val |= 0x02;
+ if (portdata->dtr_state)
+ val |= 0x01;
+ if (portdata->rts_state)
+ val |= 0x02;
- return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
- }
- return 0;
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
static int option_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index ba551f0..7de5478 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -143,8 +143,7 @@ struct oti6858_control_pkt {
/* function prototypes */
static int oti6858_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void oti6858_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void oti6858_close(struct usb_serial_port *port);
static void oti6858_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
@@ -622,67 +621,30 @@ static int oti6858_open(struct tty_struct *tty,
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
- oti6858_close(tty, port, NULL);
+ oti6858_close(port);
return -EPROTO;
}
/* setup termios */
if (tty)
oti6858_set_termios(tty, port, &tmp_termios);
-
+ port->port.drain_delay = 256; /* FIXME: check the FIFO length */
return 0;
}
-static void oti6858_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void oti6858_close(struct usb_serial_port *port)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- long timeout;
- wait_queue_t wait;
dbg("%s(port = %d)", __func__, port->number);
- /* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
- timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tty->write_wait, &wait);
- dbg("%s(): entering wait loop", __func__);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (oti6858_buf_data_avail(priv->buf) == 0
- || timeout == 0 || signal_pending(current)
- || port->serial->disconnected)
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tty->write_wait, &wait);
- dbg("%s(): after wait loop", __func__);
-
/* clear out any remaining data in the buffer */
oti6858_buf_clear(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- /* wait for characters to drain from the device */
- /* (this is long enough for the entire 256 byte */
- /* pl2303 hardware buffer to drain with no flow */
- /* control for data rates of 1200 bps or more, */
- /* for lower rates we should really know how much */
- /* data is in the buffer to compute a delay */
- /* that is not unnecessarily long) */
- /* FIXME
- bps = tty_get_baud_rate(tty);
- if (bps > 1200)
- timeout = max((HZ*2560)/bps,HZ/10);
- else
- */
- timeout = 2*HZ;
- schedule_timeout_interruptible(timeout);
- dbg("%s(): after schedule_timeout_interruptible()", __func__);
+ dbg("%s(): after buf_clear()", __func__);
/* cancel scheduled setup */
cancel_delayed_work(&priv->delayed_setup_work);
@@ -694,15 +656,6 @@ static void oti6858_close(struct tty_struct *tty,
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
-
- /*
- if (tty && (tty->termios->c_cflag) & HUPCL) {
- // drop DTR and RTS
- spin_lock_irqsave(&priv->lock, flags);
- priv->pending_setup.control &= ~CONTROL_MASK;
- spin_unlock_irqrestore(&priv->lock, flags);
- }
- */
}
static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 751a533..e02dc3d 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -652,69 +652,41 @@ static void pl2303_set_termios(struct tty_struct *tty,
kfree(buf);
}
-static void pl2303_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 control;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ /* Change DTR and RTS */
+ if (on)
+ priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+ else
+ priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ set_control_lines(port->serial->dev, control);
+}
+
+static void pl2303_close(struct usb_serial_port *port)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- unsigned int c_cflag;
- int bps;
- long timeout;
- wait_queue_t wait;
dbg("%s - port %d", __func__, port->number);
- /* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
- timeout = PL2303_CLOSING_WAIT;
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tty->write_wait, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (pl2303_buf_data_avail(priv->buf) == 0 ||
- timeout == 0 || signal_pending(current) ||
- port->serial->disconnected)
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tty->write_wait, &wait);
/* clear out any remaining data in the buffer */
pl2303_buf_clear(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- /* wait for characters to drain from the device */
- /* (this is long enough for the entire 256 byte */
- /* pl2303 hardware buffer to drain with no flow */
- /* control for data rates of 1200 bps or more, */
- /* for lower rates we should really know how much */
- /* data is in the buffer to compute a delay */
- /* that is not unnecessarily long) */
- bps = tty_get_baud_rate(tty);
- if (bps > 1200)
- timeout = max((HZ*2560)/bps, HZ/10);
- else
- timeout = 2*HZ;
- schedule_timeout_interruptible(timeout);
-
/* shutdown our urbs */
dbg("%s - shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop DTR and RTS */
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
- set_control_lines(port->serial->dev, 0);
- }
- }
}
static int pl2303_open(struct tty_struct *tty,
@@ -748,7 +720,7 @@ static int pl2303_open(struct tty_struct *tty,
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
" error %d\n", __func__, result);
- pl2303_close(tty, port, NULL);
+ pl2303_close(port);
return -EPROTO;
}
@@ -758,9 +730,10 @@ static int pl2303_open(struct tty_struct *tty,
if (result) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
" error %d\n", __func__, result);
- pl2303_close(tty, port, NULL);
+ pl2303_close(port);
return -EPROTO;
}
+ port->port.drain_delay = 256;
return 0;
}
@@ -821,6 +794,14 @@ static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
+static int pl2303_carrier_raised(struct usb_serial_port *port)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ if (priv->line_status & UART_DCD)
+ return 1;
+ return 0;
+}
+
static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -1125,6 +1106,8 @@ static struct usb_serial_driver pl2303_device = {
.num_ports = 1,
.open = pl2303_open,
.close = pl2303_close,
+ .dtr_rts = pl2303_dtr_rts,
+ .carrier_raised = pl2303_carrier_raised,
.write = pl2303_write,
.ioctl = pl2303_ioctl,
.break_ctl = pl2303_break_ctl,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 913225c..17ac34f 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -26,12 +26,10 @@
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
-#include <linux/usb/ch9.h>
#define SWIMS_USB_REQUEST_SetPower 0x00
#define SWIMS_USB_REQUEST_SetNmea 0x07
-/* per port private data */
#define N_IN_URB 4
#define N_OUT_URB 4
#define IN_BUFLEN 4096
@@ -39,6 +37,12 @@
static int debug;
static int nmea;
+/* Used in interface blacklisting */
+struct sierra_iface_info {
+ const u32 infolen; /* number of interface numbers on blacklist */
+ const u8 *ifaceinfo; /* pointer to the array holding the numbers */
+};
+
static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
{
int result;
@@ -85,6 +89,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
return result;
}
+static int is_blacklisted(const u8 ifnum,
+ const struct sierra_iface_info *blacklist)
+{
+ const u8 *info;
+ int i;
+
+ if (blacklist) {
+ info = blacklist->ifaceinfo;
+
+ for (i = 0; i < blacklist->infolen; i++) {
+ if (info[i] == ifnum)
+ return 1;
+ }
+ }
+ return 0;
+}
+
static int sierra_calc_interface(struct usb_serial *serial)
{
int interface;
@@ -153,9 +174,25 @@ static int sierra_probe(struct usb_serial *serial,
*/
usb_set_serial_data(serial, (void *)num_ports);
+ /* ifnum could have changed - by calling usb_set_interface */
+ ifnum = sierra_calc_interface(serial);
+
+ if (is_blacklisted(ifnum,
+ (struct sierra_iface_info *)id->driver_info)) {
+ dev_dbg(&serial->dev->dev,
+ "Ignoring blacklisted interface #%d\n", ifnum);
+ return -ENODEV;
+ }
+
return result;
}
+static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 };
+static const struct sierra_iface_info direct_ip_interface_blacklist = {
+ .infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces),
+ .ifaceinfo = direct_ip_non_serial_ifaces,
+};
+
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
@@ -188,9 +225,11 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
{ USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */
{ USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
- { USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */
- { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */
- { USB_DEVICE(0x1199, 0x683E) }, /* Sierra Wireless MC8790 */
+ /* Sierra Wireless MC8790, MC8791, MC8792 Composite */
+ { USB_DEVICE(0x1199, 0x683C) },
+ { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8791 Composite */
+ /* Sierra Wireless MC8790, MC8791, MC8792 */
+ { USB_DEVICE(0x1199, 0x683E) },
{ USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */
{ USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */
{ USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */
@@ -211,6 +250,10 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
+ { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
+
{ }
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -229,7 +272,6 @@ struct sierra_port_private {
/* Input endpoints and buffers for this port */
struct urb *in_urbs[N_IN_URB];
- char *in_buffer[N_IN_URB];
/* Settings for the port */
int rts_state; /* Handshaking pins (outputs) */
@@ -240,57 +282,50 @@ struct sierra_port_private {
int ri_state;
};
-static int sierra_send_setup(struct tty_struct *tty,
- struct usb_serial_port *port)
+static int sierra_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
__u16 interface = 0;
+ int val = 0;
dev_dbg(&port->dev, "%s", __func__);
portdata = usb_get_serial_port_data(port);
- if (tty) {
- int val = 0;
- if (portdata->dtr_state)
- val |= 0x01;
- if (portdata->rts_state)
- val |= 0x02;
-
- /* If composite device then properly report interface */
- if (serial->num_ports == 1) {
- interface = sierra_calc_interface(serial);
-
- /* Control message is sent only to interfaces with
- * interrupt_in endpoints
- */
- if (port->interrupt_in_urb) {
- /* send control message */
- return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22, 0x21, val, interface,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
- }
- }
-
- /* Otherwise the need to do non-composite mapping */
- else {
- if (port->bulk_out_endpointAddress == 2)
- interface = 0;
- else if (port->bulk_out_endpointAddress == 4)
- interface = 1;
- else if (port->bulk_out_endpointAddress == 5)
- interface = 2;
+ if (portdata->dtr_state)
+ val |= 0x01;
+ if (portdata->rts_state)
+ val |= 0x02;
+ /* If composite device then properly report interface */
+ if (serial->num_ports == 1) {
+ interface = sierra_calc_interface(serial);
+ /* Control message is sent only to interfaces with
+ * interrupt_in endpoints
+ */
+ if (port->interrupt_in_urb) {
+ /* send control message */
return usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
0x22, 0x21, val, interface,
NULL, 0, USB_CTRL_SET_TIMEOUT);
-
}
}
+ /* Otherwise the need to do non-composite mapping */
+ else {
+ if (port->bulk_out_endpointAddress == 2)
+ interface = 0;
+ else if (port->bulk_out_endpointAddress == 4)
+ interface = 1;
+ else if (port->bulk_out_endpointAddress == 5)
+ interface = 2;
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, interface,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ }
return 0;
}
@@ -299,7 +334,7 @@ static void sierra_set_termios(struct tty_struct *tty,
{
dev_dbg(&port->dev, "%s", __func__);
tty_termios_copy_hw(tty->termios, old_termios);
- sierra_send_setup(tty, port);
+ sierra_send_setup(port);
}
static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
@@ -338,7 +373,18 @@ static int sierra_tiocmset(struct tty_struct *tty, struct file *file,
portdata->rts_state = 0;
if (clear & TIOCM_DTR)
portdata->dtr_state = 0;
- return sierra_send_setup(tty, port);
+ return sierra_send_setup(port);
+}
+
+static void sierra_release_urb(struct urb *urb)
+{
+ struct usb_serial_port *port;
+ if (urb) {
+ port = urb->context;
+ dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
+ kfree(urb->transfer_buffer);
+ usb_free_urb(urb);
+ }
}
static void sierra_outdat_callback(struct urb *urb)
@@ -465,7 +511,7 @@ static void sierra_indat_callback(struct urb *urb)
" received", __func__);
/* Resubmit urb so we continue receiving */
- if (port->port.count && status != -ESHUTDOWN) {
+ if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dev_err(&port->dev, "resubmit read urb failed."
@@ -557,67 +603,99 @@ static int sierra_write_room(struct tty_struct *tty)
return 2048;
}
-static int sierra_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void sierra_stop_rx_urbs(struct usb_serial_port *port)
{
- struct sierra_port_private *portdata;
- struct usb_serial *serial = port->serial;
int i;
- struct urb *urb;
- int result;
+ struct sierra_port_private *portdata = usb_get_serial_port_data(port);
- portdata = usb_get_serial_port_data(port);
+ for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++)
+ usb_kill_urb(portdata->in_urbs[i]);
- dev_dbg(&port->dev, "%s", __func__);
+ usb_kill_urb(port->interrupt_in_urb);
+}
- /* Set some sane defaults */
- portdata->rts_state = 1;
- portdata->dtr_state = 1;
+static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags)
+{
+ int ok_cnt;
+ int err = -EINVAL;
+ int i;
+ struct urb *urb;
+ struct sierra_port_private *portdata = usb_get_serial_port_data(port);
- /* Reset low level data toggle and start reading from endpoints */
- for (i = 0; i < N_IN_URB; i++) {
+ ok_cnt = 0;
+ for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) {
urb = portdata->in_urbs[i];
if (!urb)
continue;
- if (urb->dev != serial->dev) {
- dev_dbg(&port->dev, "%s: dev %p != %p",
- __func__, urb->dev, serial->dev);
- continue;
+ err = usb_submit_urb(urb, mem_flags);
+ if (err) {
+ dev_err(&port->dev, "%s: submit urb failed: %d\n",
+ __func__, err);
+ } else {
+ ok_cnt++;
}
+ }
- /*
- * make sure endpoint data toggle is synchronized with the
- * device
- */
- usb_clear_halt(urb->dev, urb->pipe);
-
- result = usb_submit_urb(urb, GFP_KERNEL);
- if (result) {
- dev_err(&port->dev, "submit urb %d failed (%d) %d\n",
- i, result, urb->transfer_buffer_length);
+ if (ok_cnt && port->interrupt_in_urb) {
+ err = usb_submit_urb(port->interrupt_in_urb, mem_flags);
+ if (err) {
+ dev_err(&port->dev, "%s: submit intr urb failed: %d\n",
+ __func__, err);
}
}
- sierra_send_setup(tty, port);
+ if (ok_cnt > 0) /* at least one rx urb submitted */
+ return 0;
+ else
+ return err;
+}
+
+static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
+ int dir, void *ctx, int len,
+ gfp_t mem_flags,
+ usb_complete_t callback)
+{
+ struct urb *urb;
+ u8 *buf;
+
+ if (endpoint == -1)
+ return NULL;
- /* start up the interrupt endpoint if we have one */
- if (port->interrupt_in_urb) {
- result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
- if (result)
- dev_err(&port->dev, "submit irq_in urb failed %d\n",
- result);
+ urb = usb_alloc_urb(0, mem_flags);
+ if (urb == NULL) {
+ dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n",
+ __func__, endpoint);
+ return NULL;
}
- return 0;
+
+ buf = kmalloc(len, mem_flags);
+ if (buf) {
+ /* Fill URB using supplied data */
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, endpoint) | dir,
+ buf, len, callback, ctx);
+
+ /* debug */
+ dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__,
+ dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+ } else {
+ dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__,
+ dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+
+ sierra_release_urb(urb);
+ urb = NULL;
+ }
+
+ return urb;
}
-static void sierra_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void sierra_close(struct usb_serial_port *port)
{
int i;
struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
- dev_dbg(&port->dev, "%s", __func__);
+ dev_dbg(&port->dev, "%s\n", __func__);
portdata = usb_get_serial_port_data(port);
portdata->rts_state = 0;
@@ -626,25 +704,83 @@ static void sierra_close(struct tty_struct *tty,
if (serial->dev) {
mutex_lock(&serial->disc_mutex);
if (!serial->disconnected)
- sierra_send_setup(tty, port);
+ sierra_send_setup(port);
mutex_unlock(&serial->disc_mutex);
- /* Stop reading/writing urbs */
- for (i = 0; i < N_IN_URB; i++)
- usb_kill_urb(portdata->in_urbs[i]);
+ /* Stop reading urbs */
+ sierra_stop_rx_urbs(port);
+ /* .. and release them */
+ for (i = 0; i < N_IN_URB; i++) {
+ sierra_release_urb(portdata->in_urbs[i]);
+ portdata->in_urbs[i] = NULL;
+ }
}
+}
- usb_kill_urb(port->interrupt_in_urb);
- tty_port_tty_set(&port->port, NULL);
+static int sierra_open(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
+{
+ struct sierra_port_private *portdata;
+ struct usb_serial *serial = port->serial;
+ int i;
+ int err;
+ int endpoint;
+ struct urb *urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ dev_dbg(&port->dev, "%s", __func__);
+
+ /* Set some sane defaults */
+ portdata->rts_state = 1;
+ portdata->dtr_state = 1;
+
+
+ endpoint = port->bulk_in_endpointAddress;
+ for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) {
+ urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port,
+ IN_BUFLEN, GFP_KERNEL,
+ sierra_indat_callback);
+ portdata->in_urbs[i] = urb;
+ }
+ /* clear halt condition */
+ usb_clear_halt(serial->dev,
+ usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN);
+
+ err = sierra_submit_rx_urbs(port, GFP_KERNEL);
+ if (err) {
+ /* get rid of everything as in close */
+ sierra_close(port);
+ return err;
+ }
+ sierra_send_setup(port);
+
+ return 0;
+}
+
+
+static void sierra_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct usb_serial *serial = port->serial;
+ struct sierra_port_private *portdata;
+
+ portdata = usb_get_serial_port_data(port);
+ portdata->rts_state = on;
+ portdata->dtr_state = on;
+
+ if (serial->dev) {
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ sierra_send_setup(port);
+ mutex_unlock(&serial->disc_mutex);
+ }
}
static int sierra_startup(struct usb_serial *serial)
{
struct usb_serial_port *port;
struct sierra_port_private *portdata;
- struct urb *urb;
int i;
- int j;
dev_dbg(&serial->dev->dev, "%s", __func__);
@@ -666,34 +802,8 @@ static int sierra_startup(struct usb_serial *serial)
return -ENOMEM;
}
spin_lock_init(&portdata->lock);
- for (j = 0; j < N_IN_URB; j++) {
- portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL);
- if (!portdata->in_buffer[j]) {
- for (--j; j >= 0; j--)
- kfree(portdata->in_buffer[j]);
- kfree(portdata);
- return -ENOMEM;
- }
- }
-
+ /* Set the port private data pointer */
usb_set_serial_port_data(port, portdata);
-
- /* initialize the in urbs */
- for (j = 0; j < N_IN_URB; ++j) {
- urb = usb_alloc_urb(0, GFP_KERNEL);
- if (urb == NULL) {
- dev_dbg(&port->dev, "%s: alloc for in "
- "port failed.", __func__);
- continue;
- }
- /* Fill URB using supplied data. */
- usb_fill_bulk_urb(urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->bulk_in_endpointAddress),
- portdata->in_buffer[j], IN_BUFLEN,
- sierra_indat_callback, port);
- portdata->in_urbs[j] = urb;
- }
}
return 0;
@@ -701,7 +811,7 @@ static int sierra_startup(struct usb_serial *serial)
static void sierra_shutdown(struct usb_serial *serial)
{
- int i, j;
+ int i;
struct usb_serial_port *port;
struct sierra_port_private *portdata;
@@ -714,12 +824,6 @@ static void sierra_shutdown(struct usb_serial *serial)
portdata = usb_get_serial_port_data(port);
if (!portdata)
continue;
-
- for (j = 0; j < N_IN_URB; j++) {
- usb_kill_urb(portdata->in_urbs[j]);
- usb_free_urb(portdata->in_urbs[j]);
- kfree(portdata->in_buffer[j]);
- }
kfree(portdata);
usb_set_serial_port_data(port, NULL);
}
@@ -737,6 +841,7 @@ static struct usb_serial_driver sierra_device = {
.probe = sierra_probe,
.open = sierra_open,
.close = sierra_close,
+ .dtr_rts = sierra_dtr_rts,
.write = sierra_write,
.write_room = sierra_write_room,
.set_termios = sierra_set_termios,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 5e7528c..8f7ed8f 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -446,66 +446,47 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
"RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
}
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ if (priv->line_status & MSR_STATUS_LINE_DCD)
+ return 1;
+ return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 control;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (on)
+ priv->line_control = MCR_CONTROL_LINE_DTR
+ | MCR_CONTROL_LINE_RTS;
+ else
+ priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+ | MCR_CONTROL_LINE_RTS);
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+}
+
/* close the serial port. We should wait for data sending to device 1st and
* then kill all urb. */
-static void spcp8x5_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void spcp8x5_close(struct usb_serial_port *port)
{
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- unsigned int c_cflag;
- int bps;
- long timeout;
- wait_queue_t wait;
int result;
dbg("%s - port %d", __func__, port->number);
- /* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
- timeout = SPCP8x5_CLOSING_WAIT;
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tty->write_wait, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (ringbuf_avail_data(priv->buf) == 0 ||
- timeout == 0 || signal_pending(current))
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tty->write_wait, &wait);
-
/* clear out any remaining data in the buffer */
clear_ringbuf(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- /* wait for characters to drain from the device (this is long enough
- * for the entire all byte spcp8x5 hardware buffer to drain with no
- * flow control for data rates of 1200 bps or more, for lower rates we
- * should really know how much data is in the buffer to compute a delay
- * that is not unnecessarily long) */
- bps = tty_get_baud_rate(tty);
- if (bps > 1200)
- timeout = max((HZ*2560) / bps, HZ/10);
- else
- timeout = 2*HZ;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(timeout);
-
- /* clear control lines */
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
- spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
- }
- }
-
/* kill urb */
if (port->write_urb != NULL) {
result = usb_unlink_urb(port->write_urb);
@@ -665,13 +646,6 @@ static int spcp8x5_open(struct tty_struct *tty,
if (ret)
return ret;
- spin_lock_irqsave(&priv->lock, flags);
- if (tty && (tty->termios->c_cflag & CBAUD))
- priv->line_control = MCR_DTR | MCR_RTS;
- else
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
-
spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
/* Setup termios */
@@ -691,9 +665,10 @@ static int spcp8x5_open(struct tty_struct *tty,
port->read_urb->dev = serial->dev;
ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (ret) {
- spcp8x5_close(tty, port, NULL);
+ spcp8x5_close(port);
return -EPROTO;
}
+ port->port.drain_delay = 256;
return 0;
}
@@ -1033,6 +1008,8 @@ static struct usb_serial_driver spcp8x5_device = {
.num_ports = 1,
.open = spcp8x5_open,
.close = spcp8x5_close,
+ .dtr_rts = spcp8x5_dtr_rts,
+ .carrier_raised = spcp8x5_carrier_raised,
.write = spcp8x5_write,
.set_termios = spcp8x5_set_termios,
.ioctl = spcp8x5_ioctl,
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 69879e4..8b07ebc 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -152,8 +152,7 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
return result;
}
-static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void symbol_close(struct usb_serial_port *port)
{
struct symbol_private *priv = usb_get_serial_data(port->serial);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 0a64bac..42cb04c 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -100,8 +100,7 @@ static int ti_startup(struct usb_serial *serial);
static void ti_shutdown(struct usb_serial *serial);
static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *file);
-static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *file);
+static void ti_close(struct usb_serial_port *port);
static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *data, int count);
static int ti_write_room(struct tty_struct *tty);
@@ -647,8 +646,7 @@ release_lock:
}
-static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *file)
+static void ti_close(struct usb_serial_port *port)
{
struct ti_device *tdev;
struct ti_port *tport;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index f331e2b..1967a7e 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -238,9 +238,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
goto bailout_interface_put;
mutex_unlock(&serial->disc_mutex);
}
-
mutex_unlock(&port->mutex);
- return 0;
+ /* Now do the correct tty layer semantics */
+ retval = tty_port_block_til_ready(&port->port, tty, filp);
+ if (retval == 0)
+ return 0;
bailout_interface_put:
usb_autopm_put_interface(serial->interface);
@@ -259,64 +261,89 @@ bailout_serial_put:
return retval;
}
-static void serial_close(struct tty_struct *tty, struct file *filp)
+/**
+ * serial_do_down - shut down hardware
+ * @port: port to shut down
+ *
+ * Shut down a USB port unless it is the console. We never shut down the
+ * console hardware as it will always be in use.
+ *
+ * Don't free any resources at this point
+ */
+static void serial_do_down(struct usb_serial_port *port)
{
- struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial_driver *drv = port->serial->type;
struct usb_serial *serial;
struct module *owner;
- int count;
- if (!port)
+ /* The console is magical, do not hang up the console hardware
+ or there will be tears */
+ if (port->console)
return;
- dbg("%s - port %d", __func__, port->number);
-
mutex_lock(&port->mutex);
serial = port->serial;
owner = serial->type->driver.owner;
- if (port->port.count == 0) {
- mutex_unlock(&port->mutex);
- return;
- }
-
- if (port->port.count == 1)
- /* only call the device specific close if this
- * port is being closed by the last owner. Ensure we do
- * this before we drop the port count. The call is protected
- * by the port mutex
- */
- serial->type->close(tty, port, filp);
-
- if (port->port.count == (port->console ? 2 : 1)) {
- struct tty_struct *tty = tty_port_tty_get(&port->port);
- if (tty) {
- /* We must do this before we drop the port count to
- zero. */
- if (tty->driver_data)
- tty->driver_data = NULL;
- tty_port_tty_set(&port->port, NULL);
- tty_kref_put(tty);
- }
- }
+ if (drv->close)
+ drv->close(port);
- --port->port.count;
- count = port->port.count;
mutex_unlock(&port->mutex);
- put_device(&port->dev);
+}
+
+/**
+ * serial_do_free - free resources post close/hangup
+ * @port: port to free up
+ *
+ * Do the resource freeing and refcount dropping for the port. We must
+ * be careful about ordering and we must avoid freeing up the console.
+ */
+static void serial_do_free(struct usb_serial_port *port)
+{
+ struct usb_serial *serial;
+ struct module *owner;
+
+ /* The console is magical, do not hang up the console hardware
+ or there will be tears */
+ if (port->console)
+ return;
+
+ serial = port->serial;
+ owner = serial->type->driver.owner;
+ put_device(&port->dev);
/* Mustn't dereference port any more */
- if (count == 0) {
- mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
- usb_autopm_put_interface(serial->interface);
- mutex_unlock(&serial->disc_mutex);
- }
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ usb_autopm_put_interface(serial->interface);
+ mutex_unlock(&serial->disc_mutex);
usb_serial_put(serial);
-
/* Mustn't dereference serial any more */
- if (count == 0)
- module_put(owner);
+ module_put(owner);
+}
+
+static void serial_close(struct tty_struct *tty, struct file *filp)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ dbg("%s - port %d", __func__, port->number);
+
+
+ if (tty_port_close_start(&port->port, tty, filp) == 0)
+ return;
+
+ serial_do_down(port);
+ tty_port_close_end(&port->port, tty);
+ tty_port_tty_set(&port->port, NULL);
+ serial_do_free(port);
+}
+
+static void serial_hangup(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ serial_do_down(port);
+ tty_port_hangup(&port->port);
+ serial_do_free(port);
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -648,6 +675,29 @@ static struct usb_serial_driver *search_serial_device(
return NULL;
}
+static int serial_carrier_raised(struct tty_port *port)
+{
+ struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+ struct usb_serial_driver *drv = p->serial->type;
+ if (drv->carrier_raised)
+ return drv->carrier_raised(p);
+ /* No carrier control - don't block */
+ return 1;
+}
+
+static void serial_dtr_rts(struct tty_port *port, int on)
+{
+ struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+ struct usb_serial_driver *drv = p->serial->type;
+ if (drv->dtr_rts)
+ drv->dtr_rts(p, on);
+}
+
+static const struct tty_port_operations serial_port_ops = {
+ .carrier_raised = serial_carrier_raised,
+ .dtr_rts = serial_dtr_rts,
+};
+
int usb_serial_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
@@ -841,6 +891,7 @@ int usb_serial_probe(struct usb_interface *interface,
if (!port)
goto probe_error;
tty_port_init(&port->port);
+ port->port.ops = &serial_port_ops;
port->serial = serial;
spin_lock_init(&port->lock);
mutex_init(&port->mutex);
@@ -1071,6 +1122,9 @@ void usb_serial_disconnect(struct usb_interface *interface)
if (port) {
struct tty_struct *tty = tty_port_tty_get(&port->port);
if (tty) {
+ /* The hangup will occur asynchronously but
+ the object refcounts will sort out all the
+ cleanup */
tty_hangup(tty);
tty_kref_put(tty);
}
@@ -1135,6 +1189,7 @@ static const struct tty_operations serial_ops = {
.open = serial_open,
.close = serial_close,
.write = serial_write,
+ .hangup = serial_hangup,
.write_room = serial_write_room,
.ioctl = serial_ioctl,
.set_termios = serial_set_termios,
@@ -1147,6 +1202,7 @@ static const struct tty_operations serial_ops = {
.proc_fops = &serial_proc_fops,
};
+
struct tty_driver *usb_serial_tty_driver;
static int __init usb_serial_init(void)
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 5ac414b..b15f1c0 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -38,8 +38,7 @@
/* function prototypes for a handspring visor */
static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void visor_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void visor_close(struct usb_serial_port *port);
static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int visor_write_room(struct tty_struct *tty);
@@ -324,8 +323,7 @@ exit:
}
-static void visor_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void visor_close(struct usb_serial_port *port)
{
struct visor_private *priv = usb_get_serial_port_data(port);
unsigned char *transfer_buffer;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 5335d32..7c7295d 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -147,8 +147,7 @@ static int whiteheat_attach(struct usb_serial *serial);
static void whiteheat_shutdown(struct usb_serial *serial);
static int whiteheat_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void whiteheat_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void whiteheat_close(struct usb_serial_port *port);
static int whiteheat_write(struct tty_struct *tty,
struct usb_serial_port *port,
const unsigned char *buf, int count);
@@ -712,8 +711,7 @@ exit:
}
-static void whiteheat_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void whiteheat_close(struct usb_serial_port *port)
{
struct whiteheat_private *info = usb_get_serial_port_data(port);
struct whiteheat_urb_wrap *wrap;
@@ -723,31 +721,7 @@ static void whiteheat_close(struct tty_struct *tty,
dbg("%s - port %d", __func__, port->number);
- mutex_lock(&port->serial->disc_mutex);
- /* filp is NULL when called from usb_serial_disconnect */
- if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) {
- mutex_unlock(&port->serial->disc_mutex);
- return;
- }
- mutex_unlock(&port->serial->disc_mutex);
-
- tty->closing = 1;
-
-/*
- * Not currently in use; tty_wait_until_sent() calls
- * serial_chars_in_buffer() which deadlocks on the second semaphore
- * acquisition. This should be fixed at some point. Greg's been
- * notified.
- if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
- tty_wait_until_sent(tty, CLOSING_DELAY);
- }
-*/
-
- tty_driver_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
firm_report_tx_done(port);
-
firm_close(port);
/* shutdown our bulk reads and writes */
@@ -775,10 +749,7 @@ static void whiteheat_close(struct tty_struct *tty,
}
spin_unlock_irq(&info->lock);
mutex_unlock(&info->deathwarrant);
-
stop_command_port(port->serial);
-
- tty->closing = 0;
}
OpenPOWER on IntegriCloud