diff options
Diffstat (limited to 'drivers/usb/serial/pl2303.c')
-rw-r--r-- | drivers/usb/serial/pl2303.c | 84 |
1 files changed, 46 insertions, 38 deletions
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index b8edd7b..c9ebefd 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -33,9 +33,11 @@ #define PL2303_QUIRK_UART_STATE_IDX0 BIT(0) #define PL2303_QUIRK_LEGACY BIT(1) +#define PL2303_QUIRK_ENDPOINT_HACK BIT(2) static const struct usb_device_id id_table[] = { - { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, @@ -48,7 +50,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, - { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) }, { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, @@ -68,7 +71,8 @@ static const struct usb_device_id id_table[] = { .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75), .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, - { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */ { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) }, { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) }, @@ -78,7 +82,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, - { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) }, + { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) }, { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) }, { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, @@ -218,7 +223,12 @@ static int pl2303_probe(struct usb_serial *serial, return 0; } -static int pl2303_calc_num_ports(struct usb_serial *serial, +/* + * Use interrupt endpoint from first interface if available. + * + * This is needed due to the looney way its endpoints are set up. + */ +static int pl2303_endpoint_hack(struct usb_serial *serial, struct usb_serial_endpoints *epds) { struct usb_interface *interface = serial->interface; @@ -228,43 +238,41 @@ static int pl2303_calc_num_ports(struct usb_serial *serial, struct usb_endpoint_descriptor *endpoint; unsigned int i; - /* BEGIN HORRIBLE HACK FOR PL2303 */ - /* this is needed due to the looney way its endpoints are set up */ - if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) || - ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) || - ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) || - ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) { - if (interface != dev->actconfig->interface[0]) { - /* check out the endpoints of the other interface*/ - iface_desc = dev->actconfig->interface[0]->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - if (usb_endpoint_is_int_in(endpoint)) { - /* we found a interrupt in endpoint */ - dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n"); - if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in)) - epds->interrupt_in[epds->num_interrupt_in++] = endpoint; - } - } - } + if (interface == dev->actconfig->interface[0]) + return 0; - /* Now make sure the PL-2303 is configured correctly. - * If not, give up now and hope this hack will work - * properly during a later invocation of usb_serial_probe - */ - if (epds->num_bulk_in == 0 || epds->num_bulk_out == 0) { - dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n"); - return -ENODEV; - } + /* check out the endpoints of the other interface */ + iface_desc = dev->actconfig->interface[0]->cur_altsetting; + + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (!usb_endpoint_is_int_in(endpoint)) + continue; + + dev_dbg(ddev, "found interrupt in on separate interface\n"); + if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in)) + epds->interrupt_in[epds->num_interrupt_in++] = endpoint; + } + + return 0; +} + +static int pl2303_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + unsigned long quirks = (unsigned long)usb_get_serial_data(serial); + struct device *dev = &serial->interface->dev; + int ret; + + if (quirks & PL2303_QUIRK_ENDPOINT_HACK) { + ret = pl2303_endpoint_hack(serial, epds); + if (ret) + return ret; } - /* END HORRIBLE HACK FOR PL2303 */ if (epds->num_interrupt_in < 1) { - dev_err(ddev, "required interrupt-in endpoint missing\n"); + dev_err(dev, "required interrupt-in endpoint missing\n"); return -ENODEV; } |