diff options
Diffstat (limited to 'drivers/usb/serial/option.c')
| -rw-r--r-- | drivers/usb/serial/option.c | 76 |
1 files changed, 7 insertions, 69 deletions
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f0530c1..c856e6f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -9,40 +9,14 @@ Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> - History: - - 2005-05-19 v0.1 Initial version, based on incomplete docs - and analysis of misbehavior with the standard driver - 2005-05-20 v0.2 Extended the input buffer to avoid losing - random 64-byte chunks of data - 2005-05-21 v0.3 implemented chars_in_buffer() - turned on low_latency - simplified the code somewhat - 2005-05-24 v0.4 option_write() sometimes deadlocked under heavy load - removed some dead code - added sponsor notice - coding style clean-up - 2005-06-20 v0.4.1 add missing braces :-/ - killed end-of-line whitespace - 2005-07-15 v0.4.2 rename WLAN product to FUSION, add FUSION2 - 2005-09-10 v0.4.3 added HUAWEI E600 card and Audiovox AirCard - 2005-09-20 v0.4.4 increased recv buffer size: the card sometimes - wants to send >2000 bytes. - 2006-04-10 v0.5 fixed two array overrun errors :-/ - 2006-04-21 v0.5.1 added support for Sierra Wireless MC8755 - 2006-05-15 v0.6 re-enable multi-port support - 2006-06-01 v0.6.1 add COBRA - 2006-06-01 v0.6.2 add backwards-compatibility stuff - 2006-06-01 v0.6.3 add Novatel Wireless - 2006-06-01 v0.7 Option => GSM - 2006-06-01 v0.7.1 add COBRA2 + History: see the git log. Work sponsored by: Sigos GmbH, Germany <info@sigos.de> This driver exists because the "normal" serial driver doesn't work too well with GSM modems. Issues: - data loss -- one single Receive URB is not nearly enough - - nonstandard flow (Option devices) and multiplex (Sierra) control + - nonstandard flow (Option devices) control - controlling the baud rate doesn't make sense This driver is named "option" because the most common device it's @@ -96,8 +70,8 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_VENDOR_ID 0x0AF0 #define HUAWEI_VENDOR_ID 0x12D1 #define AUDIOVOX_VENDOR_ID 0x0F3D -#define SIERRAWIRELESS_VENDOR_ID 0x1199 #define NOVATELWIRELESS_VENDOR_ID 0x1410 +#define ANYDATA_VENDOR_ID 0x16d5 #define OPTION_PRODUCT_OLD 0x5000 #define OPTION_PRODUCT_FUSION 0x6000 @@ -106,8 +80,8 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_PRODUCT_COBRA2 0x6600 #define HUAWEI_PRODUCT_E600 0x1001 #define AUDIOVOX_PRODUCT_AIRCARD 0x0112 -#define SIERRAWIRELESS_PRODUCT_MC8755 0x6802 #define NOVATELWIRELESS_PRODUCT_U740 0x1400 +#define ANYDATA_PRODUCT_ID 0x6501 static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, @@ -117,8 +91,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, - { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -131,10 +105,7 @@ static struct usb_device_id option_ids1[] = { { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, - { } /* Terminating entry */ -}; -static struct usb_device_id option_ids3[] = { - { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -151,37 +122,11 @@ static struct usb_driver option_driver = { /* The card has three separate interfaces, which the serial driver * recognizes separately, thus num_port=1. */ -static struct usb_serial_driver option_3port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "option", - }, - .description = "GSM modem (3-port)", - .id_table = option_ids3, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, - .num_ports = 3, - .open = option_open, - .close = option_close, - .write = option_write, - .write_room = option_write_room, - .chars_in_buffer = option_chars_in_buffer, - .throttle = option_rx_throttle, - .unthrottle = option_rx_unthrottle, - .set_termios = option_set_termios, - .break_ctl = option_break_ctl, - .tiocmget = option_tiocmget, - .tiocmset = option_tiocmset, - .attach = option_startup, - .shutdown = option_shutdown, - .read_int_callback = option_instat_callback, -}; static struct usb_serial_driver option_1port_device = { .driver = { .owner = THIS_MODULE, - .name = "option", + .name = "option1", }, .description = "GSM modem (1-port)", .id_table = option_ids1, @@ -245,9 +190,6 @@ static int __init option_init(void) retval = usb_serial_register(&option_1port_device); if (retval) goto failed_1port_device_register; - retval = usb_serial_register(&option_3port_device); - if (retval) - goto failed_3port_device_register; retval = usb_register(&option_driver); if (retval) goto failed_driver_register; @@ -257,8 +199,6 @@ static int __init option_init(void) return 0; failed_driver_register: - usb_serial_deregister (&option_3port_device); -failed_3port_device_register: usb_serial_deregister (&option_1port_device); failed_1port_device_register: return retval; @@ -267,7 +207,6 @@ failed_1port_device_register: static void __exit option_exit(void) { usb_deregister (&option_driver); - usb_serial_deregister (&option_3port_device); usb_serial_deregister (&option_1port_device); } @@ -656,7 +595,6 @@ static void option_setup_urbs(struct usb_serial *serial) dbg("%s", __FUNCTION__); - for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); |
