summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/io_ti.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/io_ti.h')
-rw-r--r--drivers/usb/serial/io_ti.h92
1 files changed, 49 insertions, 43 deletions
diff --git a/drivers/usb/serial/io_ti.h b/drivers/usb/serial/io_ti.h
index cab84f2..1bd67b2 100644
--- a/drivers/usb/serial/io_ti.h
+++ b/drivers/usb/serial/io_ti.h
@@ -1,4 +1,4 @@
-/*****************************************************************************
+/*****************************************************************************
*
* Copyright (C) 1997-2002 Inside Out Networks, Inc.
*
@@ -22,10 +22,10 @@
#define DTK_ADDR_SPACE_I2C_TYPE_II 0x82 /* Addr is placed in I2C area */
#define DTK_ADDR_SPACE_I2C_TYPE_III 0x83 /* Addr is placed in I2C area */
-// UART Defines
-#define UMPMEM_BASE_UART1 0xFFA0 /* UMP UART1 base address */
-#define UMPMEM_BASE_UART2 0xFFB0 /* UMP UART2 base address */
-#define UMPMEM_OFFS_UART_LSR 0x05 /* UMP UART LSR register offset */
+/* UART Defines */
+#define UMPMEM_BASE_UART1 0xFFA0 /* UMP UART1 base address */
+#define UMPMEM_BASE_UART2 0xFFB0 /* UMP UART2 base address */
+#define UMPMEM_OFFS_UART_LSR 0x05 /* UMP UART LSR register offset */
/* Bits per character */
#define UMP_UART_CHAR5BITS 0x00
@@ -54,7 +54,7 @@
#define UMP_UART_LSR_RX_MASK 0x10
#define UMP_UART_LSR_TX_MASK 0x20
-#define UMP_UART_LSR_DATA_MASK ( LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK )
+#define UMP_UART_LSR_DATA_MASK (LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)
/* Port Settings Constants) */
#define UMP_MASK_UART_FLAGS_RTS_FLOW 0x0001
@@ -79,50 +79,57 @@
#define UMP_PORT_DIR_OUT 0x01
#define UMP_PORT_DIR_IN 0x02
-// Address of Port 0
-#define UMPM_UART1_PORT 0x03
-
-// Commands
-#define UMPC_SET_CONFIG 0x05
-#define UMPC_OPEN_PORT 0x06
-#define UMPC_CLOSE_PORT 0x07
-#define UMPC_START_PORT 0x08
-#define UMPC_STOP_PORT 0x09
-#define UMPC_TEST_PORT 0x0A
-#define UMPC_PURGE_PORT 0x0B
-
-#define UMPC_COMPLETE_READ 0x80 // Force the Firmware to complete the current Read
-#define UMPC_HARDWARE_RESET 0x81 // Force UMP back into BOOT Mode
-#define UMPC_COPY_DNLD_TO_I2C 0x82 // Copy current download image to type 0xf2 record in 16k I2C
- // firmware will change 0xff record to type 2 record when complete
+/* Address of Port 0 */
+#define UMPM_UART1_PORT 0x03
+
+/* Commands */
+#define UMPC_SET_CONFIG 0x05
+#define UMPC_OPEN_PORT 0x06
+#define UMPC_CLOSE_PORT 0x07
+#define UMPC_START_PORT 0x08
+#define UMPC_STOP_PORT 0x09
+#define UMPC_TEST_PORT 0x0A
+#define UMPC_PURGE_PORT 0x0B
+
+/* Force the Firmware to complete the current Read */
+#define UMPC_COMPLETE_READ 0x80
+/* Force UMP back into BOOT Mode */
+#define UMPC_HARDWARE_RESET 0x81
+/*
+ * Copy current download image to type 0xf2 record in 16k I2C
+ * firmware will change 0xff record to type 2 record when complete
+ */
+#define UMPC_COPY_DNLD_TO_I2C 0x82
- // Special function register commands
- // wIndex is register address
- // wValue is MSB/LSB mask/data
-#define UMPC_WRITE_SFR 0x83 // Write SFR Register
+/*
+ * Special function register commands
+ * wIndex is register address
+ * wValue is MSB/LSB mask/data
+ */
+#define UMPC_WRITE_SFR 0x83 /* Write SFR Register */
- // wIndex is register address
-#define UMPC_READ_SFR 0x84 // Read SRF Register
+/* wIndex is register address */
+#define UMPC_READ_SFR 0x84 /* Read SRF Register */
- // Set or Clear DTR (wValue bit 0 Set/Clear) wIndex ModuleID (port)
+/* Set or Clear DTR (wValue bit 0 Set/Clear) wIndex ModuleID (port) */
#define UMPC_SET_CLR_DTR 0x85
- // Set or Clear RTS (wValue bit 0 Set/Clear) wIndex ModuleID (port)
+/* Set or Clear RTS (wValue bit 0 Set/Clear) wIndex ModuleID (port) */
#define UMPC_SET_CLR_RTS 0x86
- // Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port)
+/* Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */
#define UMPC_SET_CLR_LOOPBACK 0x87
- // Set or Clear BREAK (wValue bit 0 Set/Clear) wIndex ModuleID (port)
+/* Set or Clear BREAK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */
#define UMPC_SET_CLR_BREAK 0x88
- // Read MSR wIndex ModuleID (port)
+/* Read MSR wIndex ModuleID (port) */
#define UMPC_READ_MSR 0x89
- /* Toolkit commands */
- /* Read-write group */
-#define UMPC_MEMORY_READ 0x92
-#define UMPC_MEMORY_WRITE 0x93
+/* Toolkit commands */
+/* Read-write group */
+#define UMPC_MEMORY_READ 0x92
+#define UMPC_MEMORY_WRITE 0x93
/*
* UMP DMA Definitions
@@ -130,8 +137,7 @@
#define UMPD_OEDB1_ADDRESS 0xFF08
#define UMPD_OEDB2_ADDRESS 0xFF10
-struct out_endpoint_desc_block
-{
+struct out_endpoint_desc_block {
__u8 Configuration;
__u8 XBufAddr;
__u8 XByteCount;
@@ -147,8 +153,8 @@ struct out_endpoint_desc_block
* TYPE DEFINITIONS
* Structures for Firmware commands
*/
-struct ump_uart_config /* UART settings */
-{
+/* UART settings */
+struct ump_uart_config {
__u16 wBaudRate; /* Baud rate */
__u16 wFlags; /* Bitmap mask of flags */
__u8 bDataBits; /* 5..8 - data bits per character */
@@ -165,8 +171,8 @@ struct ump_uart_config /* UART settings */
* TYPE DEFINITIONS
* Structures for USB interrupts
*/
-struct ump_interrupt /* Interrupt packet structure */
-{
+/* Interrupt packet structure */
+struct ump_interrupt {
__u8 bICode; /* Interrupt code (interrupt num) */
__u8 bIInfo; /* Interrupt information */
} __attribute__((packed));
OpenPOWER on IntegriCloud