summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/aircable.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/aircable.c')
-rw-r--r--drivers/usb/serial/aircable.c4
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index b675735..fbc8c27 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -9,7 +9,7 @@
* The device works as an standard CDC device, it has 2 interfaces, the first
* one is for firmware access and the second is the serial one.
* The protocol is very simply, there are two posibilities reading or writing.
- * When writting the first urb must have a Header that starts with 0x20 0x29 the
+ * When writing the first urb must have a Header that starts with 0x20 0x29 the
* next two bytes must say how much data will be sended.
* When reading the process is almost equal except that the header starts with
* 0x00 0x20.
@@ -18,7 +18,7 @@
* buffer: The First and Second byte is used for a Header, the Third and Fourth
* tells the device the amount of information the package holds.
* Packages are 60 bytes long Header Stuff.
- * When writting to the device the first two bytes of the header are 0x20 0x29
+ * When writing to the device the first two bytes of the header are 0x20 0x29
* When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
* situation, when too much data arrives to the device because it sends the data
* but with out the header. I will use a simply hack to override this situation,
OpenPOWER on IntegriCloud