diff options
Diffstat (limited to 'drivers/usb/musb')
| -rw-r--r-- | drivers/usb/musb/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_core.c | 48 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_core.h | 3 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_dsps.c | 5 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_gadget.c | 8 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_host.c | 2 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_virthub.c | 46 | ||||
| -rw-r--r-- | drivers/usb/musb/omap2430.c | 51 |
8 files changed, 97 insertions, 67 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 0fc5bc3..57dfc0c 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -75,6 +75,7 @@ config USB_MUSB_TUSB6010 config USB_MUSB_OMAP2PLUS tristate "OMAP2430 and onwards" depends on ARCH_OMAP2PLUS + select GENERIC_PHY config USB_MUSB_AM35X tristate "AM35x" diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 4db987f..0a43329 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -617,7 +617,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ default: s = "VALID"; break; - }; s; }), + } s; }), VBUSERR_RETRY_COUNT - musb->vbuserr_retry, musb->port1_status); @@ -922,6 +922,52 @@ static void musb_generic_disable(struct musb *musb) } /* + * Program the HDRC to start (enable interrupts, dma, etc.). + */ +void musb_start(struct musb *musb) +{ + void __iomem *regs = musb->mregs; + u8 devctl = musb_readb(regs, MUSB_DEVCTL); + + dev_dbg(musb->controller, "<== devctl %02x\n", devctl); + + /* Set INT enable registers, enable interrupts */ + musb->intrtxe = musb->epmask; + musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); + musb_writeb(regs, MUSB_INTRUSBE, 0xf7); + + musb_writeb(regs, MUSB_TESTMODE, 0); + + /* put into basic highspeed mode and start session */ + musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE + | MUSB_POWER_HSENAB + /* ENSUSPEND wedges tusb */ + /* | MUSB_POWER_ENSUSPEND */ + ); + + musb->is_active = 0; + devctl = musb_readb(regs, MUSB_DEVCTL); + devctl &= ~MUSB_DEVCTL_SESSION; + + /* session started after: + * (a) ID-grounded irq, host mode; + * (b) vbus present/connect IRQ, peripheral mode; + * (c) peripheral initiates, using SRP + */ + if (musb->port_mode != MUSB_PORT_MODE_HOST && + (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { + musb->is_active = 1; + } else { + devctl |= MUSB_DEVCTL_SESSION; + } + + musb_platform_enable(musb); + musb_writeb(regs, MUSB_DEVCTL, devctl); +} + +/* * Make the HDRC stop (disable interrupts, etc.); * reversible by musb_start * called on gadget driver unregister diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 65f3917..29f7cd7 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -46,6 +46,7 @@ #include <linux/usb.h> #include <linux/usb/otg.h> #include <linux/usb/musb.h> +#include <linux/phy/phy.h> struct musb; struct musb_hw_ep; @@ -341,6 +342,7 @@ struct musb { u16 int_tx; struct usb_phy *xceiv; + struct phy *phy; int nIrq; unsigned irq_wake:1; @@ -503,6 +505,7 @@ static inline void musb_configure_ep0(struct musb *musb) extern const char musb_driver_name[]; extern void musb_stop(struct musb *musb); +extern void musb_start(struct musb *musb); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 82e1da0..1901f6f 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -445,7 +445,7 @@ static int get_musb_port_mode(struct device *dev) case USB_DR_MODE_OTG: default: return MUSB_PORT_MODE_DUAL_ROLE; - }; + } } static int dsps_create_musb_pdev(struct dsps_glue *glue, @@ -537,6 +537,9 @@ static int dsps_probe(struct platform_device *pdev) struct dsps_glue *glue; int ret; + if (!strcmp(pdev->name, "musb-hdrc")) + return -ENODEV; + match = of_match_node(musb_dsps_of_match, pdev->dev.of_node); if (!match) { dev_err(&pdev->dev, "fail to get matching of_match struct\n"); diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 9a08679..d2d3a17 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1121,7 +1121,7 @@ static int musb_gadget_enable(struct usb_ep *ep, case USB_ENDPOINT_XFER_BULK: s = "bulk"; break; case USB_ENDPOINT_XFER_INT: s = "int"; break; default: s = "iso"; break; - }; s; }), + } s; }), musb_ep->is_in ? "IN" : "OUT", musb_ep->dma ? "dma, " : "", musb_ep->packet_sz); @@ -1790,6 +1790,10 @@ int musb_gadget_setup(struct musb *musb) musb->g.max_speed = USB_SPEED_HIGH; musb->g.speed = USB_SPEED_UNKNOWN; + MUSB_DEV_MODE(musb); + musb->xceiv->otg->default_a = 0; + musb->xceiv->state = OTG_STATE_B_IDLE; + /* this "gadget" abstracts/virtualizes the controller */ musb->g.name = musb_driver_name; musb->g.is_otg = 1; @@ -1855,6 +1859,8 @@ static int musb_gadget_start(struct usb_gadget *g, musb->xceiv->state = OTG_STATE_B_IDLE; spin_unlock_irqrestore(&musb->lock, flags); + musb_start(musb); + /* REVISIT: funcall to other code, which also * handles power budgeting ... this way also * ensures HdrcStart is indirectly called. diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 9a2b8c8..6582a20 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -253,7 +253,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_BULK: s = "-bulk"; break; case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break; default: s = "-intr"; break; - }; s; }), + } s; }), epnum, buf + offset, len); /* Configure endpoint */ diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index d8bbdb3..9af6bba 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -44,52 +44,6 @@ #include "musb_core.h" -/* -* Program the HDRC to start (enable interrupts, dma, etc.). -*/ -static void musb_start(struct musb *musb) -{ - void __iomem *regs = musb->mregs; - u8 devctl = musb_readb(regs, MUSB_DEVCTL); - - dev_dbg(musb->controller, "<== devctl %02x\n", devctl); - - /* Set INT enable registers, enable interrupts */ - musb->intrtxe = musb->epmask; - musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); - musb->intrrxe = musb->epmask & 0xfffe; - musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); - musb_writeb(regs, MUSB_INTRUSBE, 0xf7); - - musb_writeb(regs, MUSB_TESTMODE, 0); - - /* put into basic highspeed mode and start session */ - musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE - | MUSB_POWER_HSENAB - /* ENSUSPEND wedges tusb */ - /* | MUSB_POWER_ENSUSPEND */ - ); - - musb->is_active = 0; - devctl = musb_readb(regs, MUSB_DEVCTL); - devctl &= ~MUSB_DEVCTL_SESSION; - - /* session started after: - * (a) ID-grounded irq, host mode; - * (b) vbus present/connect IRQ, peripheral mode; - * (c) peripheral initiates, using SRP - */ - if (musb->port_mode != MUSB_PORT_MODE_HOST && - (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { - musb->is_active = 1; - } else { - devctl |= MUSB_DEVCTL_SESSION; - } - - musb_platform_enable(musb); - musb_writeb(regs, MUSB_DEVCTL, devctl); -} - static void musb_port_suspend(struct musb *musb, bool do_suspend) { struct usb_otg *otg = musb->xceiv->otg; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index cefafdc..2a408cd 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -38,6 +38,7 @@ #include <linux/delay.h> #include <linux/usb/musb-omap.h> #include <linux/usb/omap_control_usb.h> +#include <linux/of_platform.h> #include "musb_core.h" #include "omap2430.h" @@ -351,11 +352,21 @@ static int omap2430_musb_init(struct musb *musb) * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. */ - if (dev->parent->of_node) + if (dev->parent->of_node) { + musb->phy = devm_phy_get(dev->parent, "usb2-phy"); + + /* We can't totally remove musb->xceiv as of now because + * musb core uses xceiv.state and xceiv.otg. Once we have + * a separate state machine to handle otg, these can be moved + * out of xceiv and then we can start using the generic PHY + * framework + */ musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0); - else + } else { musb->xceiv = devm_usb_get_phy_dev(dev, 0); + musb->phy = devm_phy_get(dev, "usb"); + } if (IS_ERR(musb->xceiv)) { status = PTR_ERR(musb->xceiv); @@ -367,6 +378,10 @@ static int omap2430_musb_init(struct musb *musb) return -EPROBE_DEFER; } + if (IS_ERR(musb->phy)) { + pr_err("HS USB OTG: no PHY configured\n"); + return PTR_ERR(musb->phy); + } musb->isr = omap2430_musb_interrupt; status = pm_runtime_get_sync(dev); @@ -400,7 +415,7 @@ static int omap2430_musb_init(struct musb *musb) if (glue->status != OMAP_MUSB_UNKNOWN) omap_musb_set_mailbox(glue); - usb_phy_init(musb->xceiv); + phy_init(musb->phy); pm_runtime_put_noidle(musb->controller); return 0; @@ -463,6 +478,7 @@ static int omap2430_musb_exit(struct musb *musb) del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); + phy_exit(musb->phy); return 0; } @@ -512,8 +528,12 @@ static int omap2430_probe(struct platform_device *pdev) glue->dev = &pdev->dev; glue->musb = musb; glue->status = OMAP_MUSB_UNKNOWN; + glue->control_otghs = ERR_PTR(-ENODEV); if (np) { + struct device_node *control_node; + struct platform_device *control_pdev; + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { dev_err(&pdev->dev, @@ -542,22 +562,20 @@ static int omap2430_probe(struct platform_device *pdev) of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); - pdata->has_mailbox = of_property_read_bool(np, - "ti,has-mailbox"); pdata->board_data = data; pdata->config = config; - } - if (pdata->has_mailbox) { - glue->control_otghs = omap_get_control_dev(); - if (IS_ERR(glue->control_otghs)) { - dev_vdbg(&pdev->dev, "Failed to get control device\n"); - ret = PTR_ERR(glue->control_otghs); - goto err2; + control_node = of_parse_phandle(np, "ctrl-module", 0); + if (control_node) { + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + ret = -EINVAL; + goto err2; + } + glue->control_otghs = &control_pdev->dev; } - } else { - glue->control_otghs = ERR_PTR(-ENODEV); } pdata->platform_ops = &omap2430_ops; @@ -641,7 +659,7 @@ static int omap2430_runtime_suspend(struct device *dev) OTG_INTERFSEL); omap2430_low_level_exit(musb); - usb_phy_set_suspend(musb->xceiv, 1); + phy_power_off(musb->phy); } return 0; @@ -656,8 +674,7 @@ static int omap2430_runtime_resume(struct device *dev) omap2430_low_level_init(musb); musb_writel(musb->mregs, OTG_INTERFSEL, musb->context.otg_interfsel); - - usb_phy_set_suspend(musb->xceiv, 0); + phy_power_on(musb->phy); } return 0; |
