summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r--drivers/usb/musb/Kconfig6
-rw-r--r--drivers/usb/musb/Makefile14
-rw-r--r--drivers/usb/musb/blackfin.c96
-rw-r--r--drivers/usb/musb/davinci.c2
-rw-r--r--drivers/usb/musb/musb_core.c147
-rw-r--r--drivers/usb/musb/musb_core.h10
-rw-r--r--drivers/usb/musb/musb_debug.h13
-rw-r--r--drivers/usb/musb/musb_debugfs.c294
-rw-r--r--drivers/usb/musb/musb_gadget_ep0.c25
-rw-r--r--drivers/usb/musb/musb_regs.h10
-rw-r--r--drivers/usb/musb/musb_virthub.c4
-rw-r--r--drivers/usb/musb/musbhsdma.h16
-rw-r--r--drivers/usb/musb/omap2430.c29
-rw-r--r--drivers/usb/musb/tusb6010.c2
14 files changed, 567 insertions, 101 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 07fe490..cfd38ed 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -38,6 +38,7 @@ config USB_MUSB_SOC
default y if ARCH_DAVINCI
default y if ARCH_OMAP2430
default y if ARCH_OMAP3
+ default y if ARCH_OMAP4
default y if (BF54x && !BF544)
default y if (BF52x && !BF522 && !BF523)
@@ -50,6 +51,9 @@ comment "OMAP 243x high speed USB support"
comment "OMAP 343x high speed USB support"
depends on USB_MUSB_HDRC && ARCH_OMAP3
+comment "OMAP 44xx high speed USB support"
+ depends on USB_MUSB_HDRC && ARCH_OMAP4
+
comment "Blackfin high speed USB Support"
depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
@@ -153,7 +157,7 @@ config MUSB_PIO_ONLY
config USB_INVENTRA_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
- default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN
+ default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN || ARCH_OMAP4
help
Enable DMA transfers using Mentor's engine.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 3a485da..9705f71 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -22,6 +22,10 @@ ifeq ($(CONFIG_ARCH_OMAP3430),y)
musb_hdrc-objs += omap2430.o
endif
+ifeq ($(CONFIG_ARCH_OMAP4),y)
+ musb_hdrc-objs += omap2430.o
+endif
+
ifeq ($(CONFIG_BF54x),y)
musb_hdrc-objs += blackfin.o
endif
@@ -38,6 +42,10 @@ ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
musb_hdrc-objs += musb_virthub.o musb_host.o
endif
+ifeq ($(CONFIG_DEBUG_FS),y)
+ musb_hdrc-objs += musb_debugfs.o
+endif
+
# the kconfig must guarantee that only one of the
# possible I/O schemes will be enabled at a time ...
# PIO only, or DMA (several potential schemes).
@@ -64,12 +72,6 @@ endif
################################################################################
-# FIXME remove all these extra "-DMUSB_* things, stick to CONFIG_*
-
-ifeq ($(CONFIG_USB_INVENTRA_MUSB_HAS_AHB_ID),y)
- EXTRA_CFLAGS += -DMUSB_AHB_ID
-endif
-
# Debugging
ifeq ($(CONFIG_USB_MUSB_DEBUG),y)
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index ec8d324..b611420 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -170,6 +170,13 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci)
retval = musb_interrupt(musb);
}
+ /* Start sampling ID pin, when plug is removed from MUSB */
+ if (is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE
+ || musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+ mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
+ musb->a_wait_bcon = TIMER_DELAY;
+ }
+
spin_unlock_irqrestore(&musb->lock, flags);
return retval;
@@ -180,6 +187,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
struct musb *musb = (void *)_musb;
unsigned long flags;
u16 val;
+ static u8 toggle;
spin_lock_irqsave(&musb->lock, flags);
switch (musb->xceiv->state) {
@@ -187,10 +195,44 @@ static void musb_conn_timer_handler(unsigned long _musb)
case OTG_STATE_A_WAIT_BCON:
/* Start a new session */
val = musb_readw(musb->mregs, MUSB_DEVCTL);
+ val &= ~MUSB_DEVCTL_SESSION;
+ musb_writew(musb->mregs, MUSB_DEVCTL, val);
val |= MUSB_DEVCTL_SESSION;
musb_writew(musb->mregs, MUSB_DEVCTL, val);
+ /* Check if musb is host or peripheral. */
+ val = musb_readw(musb->mregs, MUSB_DEVCTL);
+
+ if (!(val & MUSB_DEVCTL_BDEVICE)) {
+ gpio_set_value(musb->config->gpio_vrsel, 1);
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ } else {
+ gpio_set_value(musb->config->gpio_vrsel, 0);
+ /* Ignore VBUSERROR and SUSPEND IRQ */
+ val = musb_readb(musb->mregs, MUSB_INTRUSBE);
+ val &= ~MUSB_INTR_VBUSERROR;
+ musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
+ val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
+ musb_writeb(musb->mregs, MUSB_INTRUSB, val);
+ if (is_otg_enabled(musb))
+ musb->xceiv->state = OTG_STATE_B_IDLE;
+ else
+ musb_writeb(musb->mregs, MUSB_POWER, MUSB_POWER_HSENAB);
+ }
+ mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
+ break;
+ case OTG_STATE_B_IDLE:
+
+ if (!is_peripheral_enabled(musb))
+ break;
+ /* Start a new session. It seems that MUSB needs taking
+ * some time to recognize the type of the plug inserted?
+ */
+ val = musb_readw(musb->mregs, MUSB_DEVCTL);
+ val |= MUSB_DEVCTL_SESSION;
+ musb_writew(musb->mregs, MUSB_DEVCTL, val);
val = musb_readw(musb->mregs, MUSB_DEVCTL);
+
if (!(val & MUSB_DEVCTL_BDEVICE)) {
gpio_set_value(musb->config->gpio_vrsel, 1);
musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
@@ -205,12 +247,27 @@ static void musb_conn_timer_handler(unsigned long _musb)
val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
musb_writeb(musb->mregs, MUSB_INTRUSB, val);
- val = MUSB_POWER_HSENAB;
- musb_writeb(musb->mregs, MUSB_POWER, val);
+ /* Toggle the Soft Conn bit, so that we can response to
+ * the inserting of either A-plug or B-plug.
+ */
+ if (toggle) {
+ val = musb_readb(musb->mregs, MUSB_POWER);
+ val &= ~MUSB_POWER_SOFTCONN;
+ musb_writeb(musb->mregs, MUSB_POWER, val);
+ toggle = 0;
+ } else {
+ val = musb_readb(musb->mregs, MUSB_POWER);
+ val |= MUSB_POWER_SOFTCONN;
+ musb_writeb(musb->mregs, MUSB_POWER, val);
+ toggle = 1;
+ }
+ /* The delay time is set to 1/4 second by default,
+ * shortening it, if accelerating A-plug detection
+ * is needed in OTG mode.
+ */
+ mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY / 4);
}
- mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
break;
-
default:
DBG(1, "%s state not handled\n", otg_state_string(musb));
break;
@@ -222,7 +279,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
void musb_platform_enable(struct musb *musb)
{
- if (is_host_enabled(musb)) {
+ if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
musb->a_wait_bcon = TIMER_DELAY;
}
@@ -232,16 +289,12 @@ void musb_platform_disable(struct musb *musb)
{
}
-static void bfin_vbus_power(struct musb *musb, int is_on, int sleeping)
-{
-}
-
static void bfin_set_vbus(struct musb *musb, int is_on)
{
- if (is_on)
- gpio_set_value(musb->config->gpio_vrsel, 1);
- else
- gpio_set_value(musb->config->gpio_vrsel, 0);
+ int value = musb->config->gpio_vrsel_active;
+ if (!is_on)
+ value = !value;
+ gpio_set_value(musb->config->gpio_vrsel, value);
DBG(1, "VBUS %s, devctl %02x "
/* otg %3x conf %08x prcm %08x */ "\n",
@@ -256,7 +309,7 @@ static int bfin_set_power(struct otg_transceiver *x, unsigned mA)
void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
{
- if (is_host_enabled(musb))
+ if (!is_otg_enabled(musb) && is_host_enabled(musb))
mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
}
@@ -270,7 +323,7 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
return -EIO;
}
-int __init musb_platform_init(struct musb *musb)
+int __init musb_platform_init(struct musb *musb, void *board_data)
{
/*
@@ -339,23 +392,10 @@ int __init musb_platform_init(struct musb *musb)
return 0;
}
-int musb_platform_suspend(struct musb *musb)
-{
- return 0;
-}
-
-int musb_platform_resume(struct musb *musb)
-{
- return 0;
-}
-
-
int musb_platform_exit(struct musb *musb)
{
- bfin_vbus_power(musb, 0 /*off*/, 1);
gpio_free(musb->config->gpio_vrsel);
- musb_platform_suspend(musb);
return 0;
}
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index ce2e16f..57624361 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -376,7 +376,7 @@ int musb_platform_set_mode(struct musb *musb, u8 mode)
return -EIO;
}
-int __init musb_platform_init(struct musb *musb)
+int __init musb_platform_init(struct musb *musb, void *board_data)
{
void __iomem *tibase = musb->ctrl_base;
u32 revision;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 705cc4a..fad70bc 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -149,6 +149,87 @@ static inline struct musb *dev_to_musb(struct device *dev)
/*-------------------------------------------------------------------------*/
+#ifndef CONFIG_BLACKFIN
+static int musb_ulpi_read(struct otg_transceiver *otg, u32 offset)
+{
+ void __iomem *addr = otg->io_priv;
+ int i = 0;
+ u8 r;
+ u8 power;
+
+ /* Make sure the transceiver is not in low power mode */
+ power = musb_readb(addr, MUSB_POWER);
+ power &= ~MUSB_POWER_SUSPENDM;
+ musb_writeb(addr, MUSB_POWER, power);
+
+ /* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the
+ * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
+ */
+
+ musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
+ musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
+ MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
+
+ while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
+ & MUSB_ULPI_REG_CMPLT)) {
+ i++;
+ if (i == 10000) {
+ DBG(3, "ULPI read timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ }
+ r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
+ r &= ~MUSB_ULPI_REG_CMPLT;
+ musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
+
+ return musb_readb(addr, MUSB_ULPI_REG_DATA);
+}
+
+static int musb_ulpi_write(struct otg_transceiver *otg,
+ u32 offset, u32 data)
+{
+ void __iomem *addr = otg->io_priv;
+ int i = 0;
+ u8 r = 0;
+ u8 power;
+
+ /* Make sure the transceiver is not in low power mode */
+ power = musb_readb(addr, MUSB_POWER);
+ power &= ~MUSB_POWER_SUSPENDM;
+ musb_writeb(addr, MUSB_POWER, power);
+
+ musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
+ musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data);
+ musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
+
+ while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
+ & MUSB_ULPI_REG_CMPLT)) {
+ i++;
+ if (i == 10000) {
+ DBG(3, "ULPI write timed out\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
+ r &= ~MUSB_ULPI_REG_CMPLT;
+ musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
+
+ return 0;
+}
+#else
+#define musb_ulpi_read(a, b) NULL
+#define musb_ulpi_write(a, b, c) NULL
+#endif
+
+static struct otg_io_access_ops musb_ulpi_access = {
+ .read = musb_ulpi_read,
+ .write = musb_ulpi_write,
+};
+
+/*-------------------------------------------------------------------------*/
+
#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
/*
@@ -353,8 +434,7 @@ void musb_hnp_stop(struct musb *musb)
* which cause occasional OPT A "Did not receive reset after connect"
* errors.
*/
- musb->port1_status &=
- ~(1 << USB_PORT_FEAT_C_CONNECTION);
+ musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
}
#endif
@@ -530,8 +610,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
musb_writeb(mbase, MUSB_DEVCTL, devctl);
} else {
musb->port1_status |=
- (1 << USB_PORT_FEAT_OVER_CURRENT)
- | (1 << USB_PORT_FEAT_C_OVER_CURRENT);
+ USB_PORT_STAT_OVERCURRENT
+ | (USB_PORT_STAT_C_OVERCURRENT << 16);
}
break;
default:
@@ -986,7 +1066,8 @@ static void musb_shutdown(struct platform_device *pdev)
* more than selecting one of a bunch of predefined configurations.
*/
#if defined(CONFIG_USB_TUSB6010) || \
- defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+ defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
+ || defined(CONFIG_ARCH_OMAP4)
static ushort __initdata fifo_mode = 4;
#else
static ushort __initdata fifo_mode = 2;
@@ -996,24 +1077,13 @@ static ushort __initdata fifo_mode = 2;
module_param(fifo_mode, ushort, 0);
MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
-
-enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed));
-enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed));
-
-struct fifo_cfg {
- u8 hw_ep_num;
- enum fifo_style style;
- enum buf_mode mode;
- u16 maxpacket;
-};
-
/*
* tables defining fifo_mode values. define more if you like.
* for host side, make sure both halves of ep1 are set up.
*/
/* mode 0 - fits in 2KB */
-static struct fifo_cfg __initdata mode_0_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_0_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
@@ -1022,7 +1092,7 @@ static struct fifo_cfg __initdata mode_0_cfg[] = {
};
/* mode 1 - fits in 4KB */
-static struct fifo_cfg __initdata mode_1_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_1_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
@@ -1031,7 +1101,7 @@ static struct fifo_cfg __initdata mode_1_cfg[] = {
};
/* mode 2 - fits in 4KB */
-static struct fifo_cfg __initdata mode_2_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_2_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1041,7 +1111,7 @@ static struct fifo_cfg __initdata mode_2_cfg[] = {
};
/* mode 3 - fits in 4KB */
-static struct fifo_cfg __initdata mode_3_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_3_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1051,7 +1121,7 @@ static struct fifo_cfg __initdata mode_3_cfg[] = {
};
/* mode 4 - fits in 16KB */
-static struct fifo_cfg __initdata mode_4_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_4_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1082,7 +1152,7 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
};
/* mode 5 - fits in 8KB */
-static struct fifo_cfg __initdata mode_5_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_5_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1120,7 +1190,7 @@ static struct fifo_cfg __initdata mode_5_cfg[] = {
*/
static int __init
fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
- const struct fifo_cfg *cfg, u16 offset)
+ const struct musb_fifo_cfg *cfg, u16 offset)
{
void __iomem *mbase = musb->mregs;
int size = 0;
@@ -1191,17 +1261,23 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
}
-static struct fifo_cfg __initdata ep0_cfg = {
+static struct musb_fifo_cfg __initdata ep0_cfg = {
.style = FIFO_RXTX, .maxpacket = 64,
};
static int __init ep_config_from_table(struct musb *musb)
{
- const struct fifo_cfg *cfg;
+ const struct musb_fifo_cfg *cfg;
unsigned i, n;
int offset;
struct musb_hw_ep *hw_ep = musb->endpoints;
+ if (musb->config->fifo_cfg) {
+ cfg = musb->config->fifo_cfg;
+ n = musb->config->fifo_cfg_size;
+ goto done;
+ }
+
switch (fifo_mode) {
default:
fifo_mode = 0;
@@ -1236,6 +1312,7 @@ static int __init ep_config_from_table(struct musb *musb)
musb_driver_name, fifo_mode);
+done:
offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
/* assert(offset > 0) */
@@ -1461,7 +1538,8 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || \
+ defined(CONFIG_ARCH_OMAP4)
static irqreturn_t generic_interrupt(int irq, void *__hci)
{
@@ -1948,7 +2026,7 @@ bad_config:
* isp1504, non-OTG, etc) mostly hooking up through ULPI.
*/
musb->isr = generic_interrupt;
- status = musb_platform_init(musb);
+ status = musb_platform_init(musb, plat->board_data);
if (status < 0)
goto fail2;
@@ -1957,6 +2035,11 @@ bad_config:
goto fail3;
}
+ if (!musb->xceiv->io_ops) {
+ musb->xceiv->io_priv = musb->mregs;
+ musb->xceiv->io_ops = &musb_ulpi_access;
+ }
+
#ifndef CONFIG_MUSB_PIO_ONLY
if (use_dma && dev->dma_mask) {
struct dma_controller *c;
@@ -2057,10 +2140,14 @@ bad_config:
if (status < 0)
goto fail3;
+ status = musb_init_debugfs(musb);
+ if (status < 0)
+ goto fail4;
+
#ifdef CONFIG_SYSFS
status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
if (status)
- goto fail4;
+ goto fail5;
#endif
dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
@@ -2077,6 +2164,9 @@ bad_config:
return 0;
+fail5:
+ musb_exit_debugfs(musb);
+
fail4:
if (!is_otg_enabled(musb) && is_host_enabled(musb))
usb_remove_hcd(musb_to_hcd(musb));
@@ -2153,6 +2243,7 @@ static int __exit musb_remove(struct platform_device *pdev)
* - Peripheral mode: peripheral is deactivated (or never-activated)
* - OTG mode: both roles are deactivated (or never-activated)
*/
+ musb_exit_debugfs(musb);
musb_shutdown(pdev);
#ifdef CONFIG_USB_MUSB_HDRC_HCD
if (musb->board_mode == MUSB_HOST)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index ac17b00..b22d02d 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -69,7 +69,7 @@ struct musb_ep;
#include "musb_regs.h"
#include "musb_gadget.h"
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
#include "musb_host.h"
@@ -213,7 +213,8 @@ enum musb_g_ep0_state {
*/
#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
- || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_BLACKFIN)
+ || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_BLACKFIN) \
+ || defined(CONFIG_ARCH_OMAP4)
/* REVISIT indexed access seemed to
* misbehave (on DaVinci) for at least peripheral IN ...
*/
@@ -596,7 +597,8 @@ extern void musb_hnp_stop(struct musb *musb);
extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
- defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+ defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
#else
#define musb_platform_try_idle(x, y) do {} while (0)
@@ -608,7 +610,7 @@ extern int musb_platform_get_vbus_status(struct musb *musb);
#define musb_platform_get_vbus_status(x) 0
#endif
-extern int __init musb_platform_init(struct musb *musb);
+extern int __init musb_platform_init(struct musb *musb, void *board_data);
extern int musb_platform_exit(struct musb *musb);
#endif /* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
index 9fc1db4..d73afdb 100644
--- a/drivers/usb/musb/musb_debug.h
+++ b/drivers/usb/musb/musb_debug.h
@@ -59,4 +59,17 @@ static inline int _dbg_level(unsigned l)
extern const char *otg_state_string(struct musb *);
+#ifdef CONFIG_DEBUG_FS
+extern int musb_init_debugfs(struct musb *musb);
+extern void musb_exit_debugfs(struct musb *musb);
+#else
+static inline int musb_init_debugfs(struct musb *musb)
+{
+ return 0;
+}
+static inline void musb_exit_debugfs(struct musb *musb)
+{
+}
+#endif
+
#endif /* __MUSB_LINUX_DEBUG_H__ */
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
new file mode 100644
index 0000000..bba76af
--- /dev/null
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -0,0 +1,294 @@
+/*
+ * MUSB OTG driver debugfs support
+ *
+ * Copyright 2010 Nokia Corporation
+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#ifdef CONFIG_ARM
+#include <mach/hardware.h>
+#include <mach/memory.h>
+#include <asm/mach-types.h>
+#endif
+
+#include <asm/uaccess.h>
+
+#include "musb_core.h"
+#include "musb_debug.h"
+
+#ifdef CONFIG_ARCH_DAVINCI
+#include "davinci.h"
+#endif
+
+struct musb_register_map {
+ char *name;
+ unsigned offset;
+ unsigned size;
+};
+
+static const struct musb_register_map musb_regmap[] = {
+ { "FAddr", 0x00, 8 },
+ { "Power", 0x01, 8 },
+ { "Frame", 0x0c, 16 },
+ { "Index", 0x0e, 8 },
+ { "Testmode", 0x0f, 8 },
+ { "TxMaxPp", 0x10, 16 },
+ { "TxCSRp", 0x12, 16 },
+ { "RxMaxPp", 0x14, 16 },
+ { "RxCSR", 0x16, 16 },
+ { "RxCount", 0x18, 16 },
+ { "ConfigData", 0x1f, 8 },
+ { "DevCtl", 0x60, 8 },
+ { "MISC", 0x61, 8 },
+ { "TxFIFOsz", 0x62, 8 },
+ { "RxFIFOsz", 0x63, 8 },
+ { "TxFIFOadd", 0x64, 16 },
+ { "RxFIFOadd", 0x66, 16 },
+ { "VControl", 0x68, 32 },
+ { "HWVers", 0x6C, 16 },
+ { "EPInfo", 0x78, 8 },
+ { "RAMInfo", 0x79, 8 },
+ { "LinkInfo", 0x7A, 8 },
+ { "VPLen", 0x7B, 8 },
+ { "HS_EOF1", 0x7C, 8 },
+ { "FS_EOF1", 0x7D, 8 },
+ { "LS_EOF1", 0x7E, 8 },
+ { "SOFT_RST", 0x7F, 8 },
+ { "DMA_CNTLch0", 0x204, 16 },
+ { "DMA_ADDRch0", 0x208, 16 },
+ { "DMA_COUNTch0", 0x20C, 16 },
+ { "DMA_CNTLch1", 0x214, 16 },
+ { "DMA_ADDRch1", 0x218, 16 },
+ { "DMA_COUNTch1", 0x21C, 16 },
+ { "DMA_CNTLch2", 0x224, 16 },
+ { "DMA_ADDRch2", 0x228, 16 },
+ { "DMA_COUNTch2", 0x22C, 16 },
+ { "DMA_CNTLch3", 0x234, 16 },
+ { "DMA_ADDRch3", 0x238, 16 },
+ { "DMA_COUNTch3", 0x23C, 16 },
+ { "DMA_CNTLch4", 0x244, 16 },
+ { "DMA_ADDRch4", 0x248, 16 },
+ { "DMA_COUNTch4", 0x24C, 16 },
+ { "DMA_CNTLch5", 0x254, 16 },
+ { "DMA_ADDRch5", 0x258, 16 },
+ { "DMA_COUNTch5", 0x25C, 16 },
+ { "DMA_CNTLch6", 0x264, 16 },
+ { "DMA_ADDRch6", 0x268, 16 },
+ { "DMA_COUNTch6", 0x26C, 16 },
+ { "DMA_CNTLch7", 0x274, 16 },
+ { "DMA_ADDRch7", 0x278, 16 },
+ { "DMA_COUNTch7", 0x27C, 16 },
+ { } /* Terminating Entry */
+};
+
+static struct dentry *musb_debugfs_root;
+
+static int musb_regdump_show(struct seq_file *s, void *unused)
+{
+ struct musb *musb = s->private;
+ unsigned i;
+
+ seq_printf(s, "MUSB (M)HDRC Register Dump\n");
+
+ for (i = 0; i < ARRAY_SIZE(musb_regmap); i++) {
+ switch (musb_regmap[i].size) {
+ case 8:
+ seq_printf(s, "%-12s: %02x\n", musb_regmap[i].name,
+ musb_readb(musb->mregs, musb_regmap[i].offset));
+ break;
+ case 16:
+ seq_printf(s, "%-12s: %04x\n", musb_regmap[i].name,
+ musb_readw(musb->mregs, musb_regmap[i].offset));
+ break;
+ case 32:
+ seq_printf(s, "%-12s: %08x\n", musb_regmap[i].name,
+ musb_readl(musb->mregs, musb_regmap[i].offset));
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int musb_regdump_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, musb_regdump_show, inode->i_private);
+}
+
+static int musb_test_mode_show(struct seq_file *s, void *unused)
+{
+ struct musb *musb = s->private;
+ unsigned test;
+
+ test = musb_readb(musb->mregs, MUSB_TESTMODE);
+
+ if (test & MUSB_TEST_FORCE_HOST)
+ seq_printf(s, "force host\n");
+
+ if (test & MUSB_TEST_FIFO_ACCESS)
+ seq_printf(s, "fifo access\n");
+
+ if (test & MUSB_TEST_FORCE_FS)
+ seq_printf(s, "force full-speed\n");
+
+ if (test & MUSB_TEST_FORCE_HS)
+ seq_printf(s, "force high-speed\n");
+
+ if (test & MUSB_TEST_PACKET)
+ seq_printf(s, "test packet\n");
+
+ if (test & MUSB_TEST_K)
+ seq_printf(s, "test K\n");
+
+ if (test & MUSB_TEST_J)
+ seq_printf(s, "test J\n");
+
+ if (test & MUSB_TEST_SE0_NAK)
+ seq_printf(s, "test SE0 NAK\n");
+
+ return 0;
+}
+
+static const struct file_operations musb_regdump_fops = {
+ .open = musb_regdump_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int musb_test_mode_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+
+ return single_open(file, musb_test_mode_show, inode->i_private);
+}
+
+static ssize_t musb_test_mode_write(struct file *file,
+ const char __user *ubuf, size_t count, loff_t *ppos)
+{
+ struct musb *musb = file->private_data;
+ u8 test = 0;
+ char buf[18];
+
+ memset(buf, 0x00, sizeof(buf));
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ if (!strncmp(buf, "force host", 9))
+ test = MUSB_TEST_FORCE_HOST;
+
+ if (!strncmp(buf, "fifo access", 11))
+ test = MUSB_TEST_FIFO_ACCESS;
+
+ if (!strncmp(buf, "force full-speed", 15))
+ test = MUSB_TEST_FORCE_FS;
+
+ if (!strncmp(buf, "force high-speed", 15))
+ test = MUSB_TEST_FORCE_HS;
+
+ if (!strncmp(buf, "test packet", 10)) {
+ test = MUSB_TEST_PACKET;
+ musb_load_testpacket(musb);
+ }
+
+ if (!strncmp(buf, "test K", 6))
+ test = MUSB_TEST_K;
+
+ if (!strncmp(buf, "test J", 6))
+ test = MUSB_TEST_J;
+
+ if (!strncmp(buf, "test SE0 NAK", 12))
+ test = MUSB_TEST_SE0_NAK;
+
+ musb_writeb(musb->mregs, MUSB_TESTMODE, test);
+
+ return count;
+}
+
+static const struct file_operations musb_test_mode_fops = {
+ .open = musb_test_mode_open,
+ .write = musb_test_mode_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+int __init musb_init_debugfs(struct musb *musb)
+{
+ struct dentry *root;
+ struct dentry *file;
+ int ret;
+
+ root = debugfs_create_dir("musb", NULL);
+ if (IS_ERR(root)) {
+ ret = PTR_ERR(root);
+ goto err0;
+ }
+
+ file = debugfs_create_file("regdump", S_IRUGO, root, musb,
+ &musb_regdump_fops);
+ if (IS_ERR(file)) {
+ ret = PTR_ERR(file);
+ goto err1;
+ }
+
+ file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR,
+ root, musb, &musb_test_mode_fops);
+ if (IS_ERR(file)) {
+ ret = PTR_ERR(file);
+ goto err1;
+ }
+
+ musb_debugfs_root = root;
+
+ return 0;
+
+err1:
+ debugfs_remove_recursive(root);
+
+err0:
+ return ret;
+}
+
+void /* __init_or_exit */ musb_exit_debugfs(struct musb *musb)
+{
+ debugfs_remove_recursive(musb_debugfs_root);
+}
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 53d0645..21b9788 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -351,6 +351,31 @@ __acquires(musb->lock)
musb->test_mode_nr =
MUSB_TEST_PACKET;
break;
+
+ case 0xc0:
+ /* TEST_FORCE_HS */
+ pr_debug("TEST_FORCE_HS\n");
+ musb->test_mode_nr =
+ MUSB_TEST_FORCE_HS;
+ break;
+ case 0xc1:
+ /* TEST_FORCE_FS */
+ pr_debug("TEST_FORCE_FS\n");
+ musb->test_mode_nr =
+ MUSB_TEST_FORCE_FS;
+ break;
+ case 0xc2:
+ /* TEST_FIFO_ACCESS */
+ pr_debug("TEST_FIFO_ACCESS\n");
+ musb->test_mode_nr =
+ MUSB_TEST_FIFO_ACCESS;
+ break;
+ case 0xc3:
+ /* TEST_FORCE_HOST */
+ pr_debug("TEST_FORCE_HOST\n");
+ musb->test_mode_nr =
+ MUSB_TEST_FORCE_HOST;
+ break;
default:
goto stall;
}
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index fa55aac..2442675 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -75,6 +75,10 @@
/* MUSB ULPI VBUSCONTROL */
#define MUSB_ULPI_USE_EXTVBUS 0x01
#define MUSB_ULPI_USE_EXTVBUSIND 0x02
+/* ULPI_REG_CONTROL */
+#define MUSB_ULPI_REG_REQ (1 << 0)
+#define MUSB_ULPI_REG_CMPLT (1 << 1)
+#define MUSB_ULPI_RDN_WR (1 << 2)
/* TESTMODE */
#define MUSB_TEST_FORCE_HOST 0x80
@@ -251,6 +255,12 @@
/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
#define MUSB_HWVERS 0x6C /* 8 bit */
#define MUSB_ULPI_BUSCONTROL 0x70 /* 8 bit */
+#define MUSB_ULPI_INT_MASK 0x72 /* 8 bit */
+#define MUSB_ULPI_INT_SRC 0x73 /* 8 bit */
+#define MUSB_ULPI_REG_DATA 0x74 /* 8 bit */
+#define MUSB_ULPI_REG_ADDR 0x75 /* 8 bit */
+#define MUSB_ULPI_REG_CONTROL 0x76 /* 8 bit */
+#define MUSB_ULPI_RAW_DATA 0x77 /* 8 bit */
#define MUSB_EPINFO 0x78 /* 8 bit */
#define MUSB_RAMINFO 0x79 /* 8 bit */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 7775e1c0..92e85e0 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -183,8 +183,8 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
void musb_root_disconnect(struct musb *musb)
{
- musb->port1_status = (1 << USB_PORT_FEAT_POWER)
- | (1 << USB_PORT_FEAT_C_CONNECTION);
+ musb->port1_status = USB_PORT_STAT_POWER
+ | (USB_PORT_STAT_C_CONNECTION << 16);
usb_hcd_poll_rh_status(musb_to_hcd(musb));
musb->is_active = 0;
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index 613f95a..f763d62 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -102,26 +102,16 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase,
static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
{
- u32 count = musb_readw(mbase,
+ return musb_readl(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
-
- count = count << 16;
-
- count |= musb_readw(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
-
- return count;
}
static inline void musb_write_hsdma_count(void __iomem *mbase,
u8 bchannel, u32 len)
{
- musb_writew(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),
- ((u16)((u32) len & 0xFFFF)));
- musb_writew(mbase,
+ musb_writel(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
- ((u16)(((u32) len >> 16) & 0xFFFF)));
+ len);
}
#endif /* CONFIG_BLACKFIN */
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 8259263..e06d65e 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -32,17 +32,11 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <plat/mux.h>
#include "musb_core.h"
#include "omap2430.h"
-#ifdef CONFIG_ARCH_OMAP3430
-#define get_cpu_rev() 2
-#endif
-
static struct timer_list musb_idle_timer;
@@ -145,10 +139,6 @@ void musb_platform_enable(struct musb *musb)
void musb_platform_disable(struct musb *musb)
{
}
-static void omap_vbus_power(struct musb *musb, int is_on, int sleeping)
-{
-}
-
static void omap_set_vbus(struct musb *musb, int is_on)
{
u8 devctl;
@@ -199,9 +189,10 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
return 0;
}
-int __init musb_platform_init(struct musb *musb)
+int __init musb_platform_init(struct musb *musb, void *board_data)
{
u32 l;
+ struct omap_musb_board_data *data = board_data;
#if defined(CONFIG_ARCH_OMAP2430)
omap_cfg_reg(AE5_2430_USB0HS_STP);
@@ -235,7 +226,15 @@ int __init musb_platform_init(struct musb *musb)
musb_writel(musb->mregs, OTG_SYSCONFIG, l);
l = musb_readl(musb->mregs, OTG_INTERFSEL);
- l |= ULPI_12PIN;
+
+ if (data->interface_type == MUSB_INTERFACE_UTMI) {
+ /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
+ l &= ~ULPI_12PIN; /* Disable ULPI */
+ l |= UTMI_8BIT; /* Enable UTMI */
+ } else {
+ l |= ULPI_12PIN;
+ }
+
musb_writel(musb->mregs, OTG_INTERFSEL, l);
pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
@@ -246,8 +245,6 @@ int __init musb_platform_init(struct musb *musb)
musb_readl(musb->mregs, OTG_INTERFSEL),
musb_readl(musb->mregs, OTG_SIMENABLE));
- omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
-
if (is_host_enabled(musb))
musb->board_set_vbus = omap_set_vbus;
@@ -272,7 +269,7 @@ void musb_platform_restore_context(struct musb *musb,
}
#endif
-int musb_platform_suspend(struct musb *musb)
+static int musb_platform_suspend(struct musb *musb)
{
u32 l;
@@ -327,8 +324,6 @@ static int musb_platform_resume(struct musb *musb)
int musb_platform_exit(struct musb *musb)
{
- omap_vbus_power(musb, 0 /*off*/, 1);
-
musb_platform_suspend(musb);
return 0;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 60d3938..05c077f 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1104,7 +1104,7 @@ err:
return -ENODEV;
}
-int __init musb_platform_init(struct musb *musb)
+int __init musb_platform_init(struct musb *musb, void *board_data)
{
struct platform_device *pdev;
struct resource *mem;
OpenPOWER on IntegriCloud