summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/omap2430.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/omap2430.c')
-rw-r--r--drivers/usb/musb/omap2430.c100
1 files changed, 45 insertions, 55 deletions
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 5d70593..b1dd81f 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -77,7 +77,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
otg_set_vbus(otg, 1);
} else {
musb->is_active = 1;
- otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
@@ -89,7 +88,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
* jumping right to B_IDLE...
*/
- otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
devctl &= ~MUSB_DEVCTL_SESSION;
@@ -148,14 +146,12 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
struct musb_hdrc_platform_data *pdata =
dev_get_platdata(musb->controller);
struct omap_musb_board_data *data = pdata->board_data;
- struct usb_otg *otg = musb->xceiv->otg;
pm_runtime_get_sync(musb->controller);
switch (glue->status) {
case MUSB_ID_GROUND:
dev_dbg(musb->controller, "ID GND\n");
- otg->default_a = true;
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
musb->xceiv->last_event = USB_EVENT_ID;
if (musb->gadget_driver) {
@@ -168,7 +164,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
case MUSB_VBUS_VALID:
dev_dbg(musb->controller, "VBUS Connect\n");
- otg->default_a = false;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
musb->xceiv->last_event = USB_EVENT_VBUS;
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
@@ -239,21 +234,15 @@ static int omap2430_musb_init(struct musb *musb)
* up through ULPI. TWL4030-family PMICs include one,
* which needs a driver, drivers aren't always needed.
*/
- if (dev->parent->of_node) {
- musb->phy = devm_phy_get(dev->parent, "usb2-phy");
-
- /* We can't totally remove musb->xceiv as of now because
- * musb core uses xceiv.state and xceiv.otg. Once we have
- * a separate state machine to handle otg, these can be moved
- * out of xceiv and then we can start using the generic PHY
- * framework
- */
- musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
- "usb-phy", 0);
- } else {
- musb->xceiv = devm_usb_get_phy_dev(dev, 0);
- musb->phy = devm_phy_get(dev, "usb");
- }
+ musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
+ /* We can't totally remove musb->xceiv as of now because
+ * musb core uses xceiv.state and xceiv.otg. Once we have
+ * a separate state machine to handle otg, these can be moved
+ * out of xceiv and then we can start using the generic PHY
+ * framework
+ */
+ musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0);
if (IS_ERR(musb->xceiv)) {
status = PTR_ERR(musb->xceiv);
@@ -391,8 +380,13 @@ static int omap2430_probe(struct platform_device *pdev)
struct omap2430_glue *glue;
struct device_node *np = pdev->dev.of_node;
struct musb_hdrc_config *config;
+ struct device_node *control_node;
+ struct platform_device *control_pdev;
int ret = -ENOMEM, val;
+ if (!np)
+ return -ENODEV;
+
glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
if (!glue)
goto err0;
@@ -412,47 +406,43 @@ static int omap2430_probe(struct platform_device *pdev)
glue->status = MUSB_UNKNOWN;
glue->control_otghs = ERR_PTR(-ENODEV);
- if (np) {
- struct device_node *control_node;
- struct platform_device *control_pdev;
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ goto err2;
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- goto err2;
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ goto err2;
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- goto err2;
+ config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
+ if (!config)
+ goto err2;
- config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
- if (!config)
+ of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
+ of_property_read_u32(np, "interface-type",
+ (u32 *)&data->interface_type);
+ of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
+ of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
+ of_property_read_u32(np, "power", (u32 *)&pdata->power);
+
+ ret = of_property_read_u32(np, "multipoint", &val);
+ if (!ret && val)
+ config->multipoint = true;
+
+ pdata->board_data = data;
+ pdata->config = config;
+
+ control_node = of_parse_phandle(np, "ctrl-module", 0);
+ if (control_node) {
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(&pdev->dev, "Failed to get control device\n");
+ ret = -EINVAL;
goto err2;
-
- of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
- of_property_read_u32(np, "interface-type",
- (u32 *)&data->interface_type);
- of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
- of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
- of_property_read_u32(np, "power", (u32 *)&pdata->power);
-
- ret = of_property_read_u32(np, "multipoint", &val);
- if (!ret && val)
- config->multipoint = true;
-
- pdata->board_data = data;
- pdata->config = config;
-
- control_node = of_parse_phandle(np, "ctrl-module", 0);
- if (control_node) {
- control_pdev = of_find_device_by_node(control_node);
- if (!control_pdev) {
- dev_err(&pdev->dev, "Failed to get control device\n");
- ret = -EINVAL;
- goto err2;
- }
- glue->control_otghs = &control_pdev->dev;
}
+ glue->control_otghs = &control_pdev->dev;
}
+
pdata->platform_ops = &omap2430_ops;
platform_set_drvdata(pdev, glue);
OpenPOWER on IntegriCloud