summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/Kconfig')
-rw-r--r--drivers/usb/musb/Kconfig176
1 files changed, 176 insertions, 0 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
new file mode 100644
index 0000000..faca433
--- /dev/null
+++ b/drivers/usb/musb/Kconfig
@@ -0,0 +1,176 @@
+#
+# USB Dual Role (OTG-ready) Controller Drivers
+# for silicon based on Mentor Graphics INVENTRA designs
+#
+
+comment "Enable Host or Gadget support to see Inventra options"
+ depends on !USB && USB_GADGET=n
+
+# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
+config USB_MUSB_HDRC
+ depends on (USB || USB_GADGET) && HAVE_CLK
+ select TWL4030_USB if MACH_OMAP_3430SDP
+ tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
+ help
+ Say Y here if your system has a dual role high speed USB
+ controller based on the Mentor Graphics silicon IP. Then
+ configure options to match your silicon and the board
+ it's being used with, including the USB peripheral role,
+ or the USB host role, or both.
+
+ Texas Instruments parts using this IP include DaVinci 644x,
+ OMAP 243x, OMAP 343x, and TUSB 6010.
+
+ If you do not know what this is, please say N.
+
+ To compile this driver as a module, choose M here; the
+ module will be called "musb_hdrc".
+
+config USB_MUSB_SOC
+ boolean
+ depends on USB_MUSB_HDRC
+ default y if ARCH_DAVINCI
+ default y if ARCH_OMAP2430
+ default y if ARCH_OMAP34XX
+ help
+ Use a static <asm/arch/hdrc_cnf.h> file to describe how the
+ controller is configured (endpoints, mechanisms, etc) on the
+ current iteration of a given system-on-chip.
+
+comment "DaVinci 644x USB support"
+ depends on USB_MUSB_HDRC && ARCH_DAVINCI
+
+comment "OMAP 243x high speed USB support"
+ depends on USB_MUSB_HDRC && ARCH_OMAP2430
+
+comment "OMAP 343x high speed USB support"
+ depends on USB_MUSB_HDRC && ARCH_OMAP34XX
+
+config USB_TUSB6010
+ boolean "TUSB 6010 support"
+ depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+ default y
+ help
+ The TUSB 6010 chip, from Texas Instruments, connects a discrete
+ HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
+ (a high speed serial link). It can use system-specific external
+ DMA controllers.
+
+choice
+ prompt "Driver Mode"
+ depends on USB_MUSB_HDRC
+ help
+ Dual-Role devices can support both host and peripheral roles,
+ as well as a the special "OTG Device" role which can switch
+ between both roles as needed.
+
+# use USB_MUSB_HDRC_HCD not USB_MUSB_HOST to #ifdef host side support;
+# OTG needs both roles, not just USB_MUSB_HOST.
+config USB_MUSB_HOST
+ depends on USB
+ bool "USB Host"
+ help
+ Say Y here if your system supports the USB host role.
+ If it has a USB "A" (rectangular), "Mini-A" (uncommon),
+ or "Mini-AB" connector, it supports the host role.
+ (With a "Mini-AB" connector, you should enable USB OTG.)
+
+# use USB_GADGET_MUSB_HDRC not USB_MUSB_PERIPHERAL to #ifdef peripheral
+# side support ... OTG needs both roles
+config USB_MUSB_PERIPHERAL
+ depends on USB_GADGET
+ bool "USB Peripheral (gadget stack)"
+ select USB_GADGET_MUSB_HDRC
+ help
+ Say Y here if your system supports the USB peripheral role.
+ If it has a USB "B" (squarish), "Mini-B", or "Mini-AB"
+ connector, it supports the peripheral role.
+ (With a "Mini-AB" connector, you should enable USB OTG.)
+
+config USB_MUSB_OTG
+ depends on USB && USB_GADGET && PM && EXPERIMENTAL
+ bool "Both host and peripheral: USB OTG (On The Go) Device"
+ select USB_GADGET_MUSB_HDRC
+ select USB_OTG
+ help
+ The most notable feature of USB OTG is support for a
+ "Dual-Role" device, which can act as either a device
+ or a host. The initial role choice can be changed
+ later, when two dual-role devices talk to each other.
+
+ At this writing, the OTG support in this driver is incomplete,
+ omitting the mandatory HNP or SRP protocols. However, some
+ of the cable based role switching works. (That is, grounding
+ the ID pin switches the controller to host mode, while leaving
+ it floating leaves it in peripheral mode.)
+
+ Select this if your system has a Mini-AB connector, or
+ to simplify certain kinds of configuration.
+
+ To implement your OTG Targeted Peripherals List (TPL), enable
+ USB_OTG_WHITELIST and update "drivers/usb/core/otg_whitelist.h"
+ to match your requirements.
+
+endchoice
+
+# enable peripheral support (including with OTG)
+config USB_GADGET_MUSB_HDRC
+ bool
+ depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+# default y
+# select USB_GADGET_DUALSPEED
+# select USB_GADGET_SELECTED
+
+# enables host support (including with OTG)
+config USB_MUSB_HDRC_HCD
+ bool
+ depends on USB_MUSB_HDRC && (USB_MUSB_HOST || USB_MUSB_OTG)
+ select USB_OTG if USB_GADGET_MUSB_HDRC
+ default y
+
+
+config MUSB_PIO_ONLY
+ bool 'Disable DMA (always use PIO)'
+ depends on USB_MUSB_HDRC
+ default y if USB_TUSB6010
+ help
+ All data is copied between memory and FIFO by the CPU.
+ DMA controllers are ignored.
+
+ Do not select 'n' here unless DMA support for your SOC or board
+ is unavailable (or unstable). When DMA is enabled at compile time,
+ you can still disable it at run time using the "use_dma=n" module
+ parameter.
+
+config USB_INVENTRA_DMA
+ bool
+ depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+ default ARCH_OMAP2430 || ARCH_OMAP34XX
+ help
+ Enable DMA transfers using Mentor's engine.
+
+config USB_TI_CPPI_DMA
+ bool
+ depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+ default ARCH_DAVINCI
+ help
+ Enable DMA transfers when TI CPPI DMA is available.
+
+config USB_TUSB_OMAP_DMA
+ bool
+ depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+ depends on USB_TUSB6010
+ depends on ARCH_OMAP
+ default y
+ help
+ Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
+
+config USB_MUSB_LOGLEVEL
+ depends on USB_MUSB_HDRC
+ int 'Logging Level (0 - none / 3 - annoying / ... )'
+ default 0
+ help
+ Set the logging level. 0 disables the debugging altogether,
+ although when USB_DEBUG is set the value is at least 1.
+ Starting at level 3, per-transfer (urb, usb_request, packet,
+ or dma transfer) tracing may kick in.
OpenPOWER on IntegriCloud