diff options
Diffstat (limited to 'drivers/usb/misc')
| -rw-r--r-- | drivers/usb/misc/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/usb/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/usb/misc/ezusb.c | 38 | ||||
| -rw-r--r-- | drivers/usb/misc/usb3503.c | 325 | ||||
| -rw-r--r-- | drivers/usb/misc/usbtest.c | 19 |
5 files changed, 372 insertions, 18 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index a8f0523..3b1a3f4 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -246,6 +246,13 @@ config USB_YUREX config USB_EZUSB_FX2 tristate "Functions for loading firmware on EZUSB chips" + depends on USB help Say Y here if you need EZUSB device support. (Cypress FX/FX2/FX2LP microcontrollers) + +config USB_HSIC_USB3503 + tristate "USB3503 HSIC to USB20 Driver" + depends on I2C + help + This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 3e99a64..3e1bd70 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -26,5 +26,6 @@ obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o obj-$(CONFIG_USB_USS720) += uss720.o obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o obj-$(CONFIG_USB_YUREX) += yurex.o +obj-$(CONFIG_USB_HSIC_USB3503) += usb3503.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c index 6589268..e712afe 100644 --- a/drivers/usb/misc/ezusb.c +++ b/drivers/usb/misc/ezusb.c @@ -15,6 +15,7 @@ #include <linux/usb.h> #include <linux/firmware.h> #include <linux/ihex.h> +#include <linux/usb/ezusb.h> struct ezusb_fx_type { /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ @@ -22,21 +23,16 @@ struct ezusb_fx_type { unsigned short max_internal_adress; }; -struct ezusb_fx_type ezusb_fx1 = { +static struct ezusb_fx_type ezusb_fx1 = { .cpucs_reg = 0x7F92, .max_internal_adress = 0x1B3F, }; -struct ezusb_fx_type ezusb_fx2 = { - .cpucs_reg = 0xE600, - .max_internal_adress = 0x3FFF, -}; - /* Commands for writing to memory */ #define WRITE_INT_RAM 0xA0 #define WRITE_EXT_RAM 0xA3 -int ezusb_writememory(struct usb_device *dev, int address, +static int ezusb_writememory(struct usb_device *dev, int address, unsigned char *data, int length, __u8 request) { int result; @@ -58,10 +54,9 @@ int ezusb_writememory(struct usb_device *dev, int address, kfree(transfer_buffer); return result; } -EXPORT_SYMBOL_GPL(ezusb_writememory); -int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg, - unsigned char reset_bit) +static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg, + unsigned char reset_bit) { int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM); if (response < 0) @@ -76,12 +71,6 @@ int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit) } EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset); -int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit) -{ - return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit); -} -EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset); - static int ezusb_ihex_firmware_download(struct usb_device *dev, struct ezusb_fx_type fx, const char *firmware_path) @@ -151,11 +140,28 @@ int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, } EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download); +#if 0 +/* + * Once someone one needs these fx2 functions, uncomment them + * and add them to ezusb.h and all should be good. + */ +static struct ezusb_fx_type ezusb_fx2 = { + .cpucs_reg = 0xE600, + .max_internal_adress = 0x3FFF, +}; + +int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit) +{ + return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit); +} +EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset); + int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, const char *firmware_path) { return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path); } EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download); +#endif MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c new file mode 100644 index 0000000..f713f6a --- /dev/null +++ b/drivers/usb/misc/usb3503.c @@ -0,0 +1,325 @@ +/* + * Driver for SMSC USB3503 USB 2.0 hub controller driver + * + * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/platform_data/usb3503.h> + +#define USB3503_VIDL 0x00 +#define USB3503_VIDM 0x01 +#define USB3503_PIDL 0x02 +#define USB3503_PIDM 0x03 +#define USB3503_DIDL 0x04 +#define USB3503_DIDM 0x05 + +#define USB3503_CFG1 0x06 +#define USB3503_SELF_BUS_PWR (1 << 7) + +#define USB3503_CFG2 0x07 +#define USB3503_CFG3 0x08 +#define USB3503_NRD 0x09 + +#define USB3503_PDS 0x0a +#define USB3503_PORT1 (1 << 1) +#define USB3503_PORT2 (1 << 2) +#define USB3503_PORT3 (1 << 3) + +#define USB3503_SP_ILOCK 0xe7 +#define USB3503_SPILOCK_CONNECT (1 << 1) +#define USB3503_SPILOCK_CONFIG (1 << 0) + +#define USB3503_CFGP 0xee +#define USB3503_CLKSUSP (1 << 7) + +struct usb3503 { + enum usb3503_mode mode; + struct i2c_client *client; + int gpio_intn; + int gpio_reset; + int gpio_connect; +}; + +static int usb3503_write_register(struct i2c_client *client, + char reg, char data) +{ + return i2c_smbus_write_byte_data(client, reg, data); +} + +static int usb3503_read_register(struct i2c_client *client, char reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int usb3503_set_bits(struct i2c_client *client, char reg, char req) +{ + int err; + + err = usb3503_read_register(client, reg); + if (err < 0) + return err; + + err = usb3503_write_register(client, reg, err | req); + if (err < 0) + return err; + + return 0; +} + +static int usb3503_clear_bits(struct i2c_client *client, char reg, char req) +{ + int err; + + err = usb3503_read_register(client, reg); + if (err < 0) + return err; + + err = usb3503_write_register(client, reg, err & ~req); + if (err < 0) + return err; + + return 0; +} + +static int usb3503_reset(int gpio_reset, int state) +{ + if (gpio_is_valid(gpio_reset)) + gpio_set_value(gpio_reset, state); + + /* Wait RefClk when RESET_N is released, otherwise Hub will + * not transition to Hub Communication Stage. + */ + if (state) + msleep(100); + + return 0; +} + +static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode) +{ + struct i2c_client *i2c = hub->client; + int err = 0; + + switch (mode) { + case USB3503_MODE_HUB: + usb3503_reset(hub->gpio_reset, 1); + + /* SP_ILOCK: set connect_n, config_n for config */ + err = usb3503_write_register(i2c, USB3503_SP_ILOCK, + (USB3503_SPILOCK_CONNECT + | USB3503_SPILOCK_CONFIG)); + if (err < 0) { + dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err); + goto err_hubmode; + } + + /* PDS : Port2,3 Disable For Self Powered Operation */ + err = usb3503_set_bits(i2c, USB3503_PDS, + (USB3503_PORT2 | USB3503_PORT3)); + if (err < 0) { + dev_err(&i2c->dev, "PDS failed (%d)\n", err); + goto err_hubmode; + } + + /* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */ + err = usb3503_set_bits(i2c, USB3503_CFG1, USB3503_SELF_BUS_PWR); + if (err < 0) { + dev_err(&i2c->dev, "CFG1 failed (%d)\n", err); + goto err_hubmode; + } + + /* SP_LOCK: clear connect_n, config_n for hub connect */ + err = usb3503_clear_bits(i2c, USB3503_SP_ILOCK, + (USB3503_SPILOCK_CONNECT + | USB3503_SPILOCK_CONFIG)); + if (err < 0) { + dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err); + goto err_hubmode; + } + + hub->mode = mode; + dev_info(&i2c->dev, "switched to HUB mode\n"); + break; + + case USB3503_MODE_STANDBY: + usb3503_reset(hub->gpio_reset, 0); + + hub->mode = mode; + dev_info(&i2c->dev, "switched to STANDBY mode\n"); + break; + + default: + dev_err(&i2c->dev, "unknown mode is request\n"); + err = -EINVAL; + break; + } + +err_hubmode: + return err; +} + +static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + struct usb3503_platform_data *pdata = i2c->dev.platform_data; + struct device_node *np = i2c->dev.of_node; + struct usb3503 *hub; + int err = -ENOMEM; + u32 mode = USB3503_MODE_UNKNOWN; + + hub = kzalloc(sizeof(struct usb3503), GFP_KERNEL); + if (!hub) { + dev_err(&i2c->dev, "private data alloc fail\n"); + return err; + } + + i2c_set_clientdata(i2c, hub); + hub->client = i2c; + + if (pdata) { + hub->gpio_intn = pdata->gpio_intn; + hub->gpio_connect = pdata->gpio_connect; + hub->gpio_reset = pdata->gpio_reset; + hub->mode = pdata->initial_mode; + } else if (np) { + hub->gpio_intn = of_get_named_gpio(np, "connect-gpios", 0); + if (hub->gpio_intn == -EPROBE_DEFER) + return -EPROBE_DEFER; + hub->gpio_connect = of_get_named_gpio(np, "intn-gpios", 0); + if (hub->gpio_connect == -EPROBE_DEFER) + return -EPROBE_DEFER; + hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0); + if (hub->gpio_reset == -EPROBE_DEFER) + return -EPROBE_DEFER; + of_property_read_u32(np, "initial-mode", &mode); + hub->mode = mode; + } + + if (gpio_is_valid(hub->gpio_intn)) { + err = gpio_request_one(hub->gpio_intn, + GPIOF_OUT_INIT_HIGH, "usb3503 intn"); + if (err) { + dev_err(&i2c->dev, + "unable to request GPIO %d as connect pin (%d)\n", + hub->gpio_intn, err); + goto err_out; + } + } + + if (gpio_is_valid(hub->gpio_connect)) { + err = gpio_request_one(hub->gpio_connect, + GPIOF_OUT_INIT_HIGH, "usb3503 connect"); + if (err) { + dev_err(&i2c->dev, + "unable to request GPIO %d as connect pin (%d)\n", + hub->gpio_connect, err); + goto err_gpio_connect; + } + } + + if (gpio_is_valid(hub->gpio_reset)) { + err = gpio_request_one(hub->gpio_reset, + GPIOF_OUT_INIT_LOW, "usb3503 reset"); + if (err) { + dev_err(&i2c->dev, + "unable to request GPIO %d as reset pin (%d)\n", + hub->gpio_reset, err); + goto err_gpio_reset; + } + } + + usb3503_switch_mode(hub, hub->mode); + + dev_info(&i2c->dev, "%s: probed on %s mode\n", __func__, + (hub->mode == USB3503_MODE_HUB) ? "hub" : "standby"); + + return 0; + +err_gpio_reset: + if (gpio_is_valid(hub->gpio_connect)) + gpio_free(hub->gpio_connect); +err_gpio_connect: + if (gpio_is_valid(hub->gpio_intn)) + gpio_free(hub->gpio_intn); +err_out: + kfree(hub); + + return err; +} + +static int usb3503_remove(struct i2c_client *i2c) +{ + struct usb3503 *hub = i2c_get_clientdata(i2c); + + if (gpio_is_valid(hub->gpio_intn)) + gpio_free(hub->gpio_intn); + if (gpio_is_valid(hub->gpio_connect)) + gpio_free(hub->gpio_connect); + if (gpio_is_valid(hub->gpio_reset)) + gpio_free(hub->gpio_reset); + + kfree(hub); + + return 0; +} + +static const struct i2c_device_id usb3503_id[] = { + { USB3503_I2C_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, usb3503_id); + +#ifdef CONFIG_OF +static const struct of_device_id usb3503_of_match[] = { + { .compatible = "smsc,usb3503", }, + {}, +}; +MODULE_DEVICE_TABLE(of, usb3503_of_match); +#endif + +static struct i2c_driver usb3503_driver = { + .driver = { + .name = USB3503_I2C_NAME, + .of_match_table = of_match_ptr(usb3503_of_match), + }, + .probe = usb3503_probe, + .remove = usb3503_remove, + .id_table = usb3503_id, +}; + +static int __init usb3503_init(void) +{ + return i2c_add_driver(&usb3503_driver); +} + +static void __exit usb3503_exit(void) +{ + i2c_del_driver(&usb3503_driver); +} + +module_init(usb3503_init); +module_exit(usb3503_exit); + +MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>"); +MODULE_DESCRIPTION("USB3503 USB HUB driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 055b84a..8b4ca1c 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -13,6 +13,12 @@ /*-------------------------------------------------------------------------*/ +static int override_alt = -1; +module_param_named(alt, override_alt, int, 0644); +MODULE_PARM_DESC(alt, ">= 0 to override altsetting selection"); + +/*-------------------------------------------------------------------------*/ + /* FIXME make these public somewhere; usbdevfs.h? */ struct usbtest_param { /* inputs */ @@ -103,6 +109,10 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf) iso_in = iso_out = NULL; alt = intf->altsetting + tmp; + if (override_alt >= 0 && + override_alt != alt->desc.bAlternateSetting) + continue; + /* take the first altsetting with in-bulk + out-bulk; * ignore other endpoints and altsettings. */ @@ -144,6 +154,7 @@ try_iso: found: udev = testdev_to_usbdev(dev); + dev->info->alt = alt->desc.bAlternateSetting; if (alt->desc.bAlternateSetting != 0) { tmp = usb_set_interface(udev, alt->desc.bInterfaceNumber, @@ -423,6 +434,9 @@ alloc_sglist(int nents, int max, int vary) unsigned i; unsigned size = max; + if (max == 0) + return NULL; + sg = kmalloc_array(nents, sizeof *sg, GFP_KERNEL); if (!sg) return NULL; @@ -2176,7 +2190,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) if (dev->out_pipe == 0 || !param->length || param->sglen < 4) break; retval = 0; - dev_info(&intf->dev, "TEST 17: unlink from %d queues of " + dev_info(&intf->dev, "TEST 24: unlink from %d queues of " "%d %d-byte writes\n", param->iterations, param->sglen, param->length); for (i = param->iterations; retval == 0 && i > 0; --i) { @@ -2277,7 +2291,7 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id) wtest = " intr-out"; } } else { - if (info->autoconf) { + if (override_alt >= 0 || info->autoconf) { int status; status = get_endpoints(dev, intf); @@ -2386,6 +2400,7 @@ static struct usbtest_info gz_info = { .name = "Linux gadget zero", .autoconf = 1, .ctrl_out = 1, + .iso = 1, .alt = 0, }; |
