diff options
Diffstat (limited to 'drivers/usb/media/sn9c102_sensor.h')
| -rw-r--r-- | drivers/usb/media/sn9c102_sensor.h | 389 |
1 files changed, 0 insertions, 389 deletions
diff --git a/drivers/usb/media/sn9c102_sensor.h b/drivers/usb/media/sn9c102_sensor.h deleted file mode 100644 index 2afd9e9..0000000 --- a/drivers/usb/media/sn9c102_sensor.h +++ /dev/null @@ -1,389 +0,0 @@ -/*************************************************************************** - * API for image sensors connected to the SN9C10x PC Camera Controllers * - * * - * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the Free Software * - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - ***************************************************************************/ - -#ifndef _SN9C102_SENSOR_H_ -#define _SN9C102_SENSOR_H_ - -#include <linux/usb.h> -#include <linux/videodev.h> -#include <linux/device.h> -#include <linux/stddef.h> -#include <linux/errno.h> -#include <asm/types.h> - -struct sn9c102_device; -struct sn9c102_sensor; - -/*****************************************************************************/ - -/* - OVERVIEW. - This is a small interface that allows you to add support for any CCD/CMOS - image sensors connected to the SN9C10X bridges. The entire API is documented - below. In the most general case, to support a sensor there are three steps - you have to follow: - 1) define the main "sn9c102_sensor" structure by setting the basic fields; - 2) write a probing function to be called by the core module when the USB - camera is recognized, then add both the USB ids and the name of that - function to the two corresponding tables SENSOR_TABLE and ID_TABLE (see - below); - 3) implement the methods that you want/need (and fill the rest of the main - structure accordingly). - "sn9c102_pas106b.c" is an example of all this stuff. Remember that you do - NOT need to touch the source code of the core module for the things to work - properly, unless you find bugs or flaws in it. Finally, do not forget to - read the V4L2 API for completeness. -*/ - -/*****************************************************************************/ - -/* - Probing functions: on success, you must attach the sensor to the camera - by calling sn9c102_attach_sensor() provided below. - To enable the I2C communication, you might need to perform a really basic - initialization of the SN9C10X chip by using the write function declared - ahead. - Functions must return 0 on success, the appropriate error otherwise. -*/ -extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam); -extern int sn9c102_probe_mi0343(struct sn9c102_device* cam); -extern int sn9c102_probe_ov7630(struct sn9c102_device* cam); -extern int sn9c102_probe_pas106b(struct sn9c102_device* cam); -extern int sn9c102_probe_pas202bca(struct sn9c102_device* cam); -extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam); -extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam); -extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam); - -/* - Add the above entries to this table. Be sure to add the entry in the right - place, since, on failure, the next probing routine is called according to - the order of the list below, from top to bottom. -*/ -#define SN9C102_SENSOR_TABLE \ -static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = { \ - &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */ \ - &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ \ - &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ \ - &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ \ - &sn9c102_probe_pas202bca, /* detection mostly based on USB pid/vid */ \ - &sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */ \ - &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ \ - &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ \ - NULL, \ -}; - -/* Device identification */ -extern struct sn9c102_device* -sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id); - -/* Attach a probed sensor to the camera. */ -extern void -sn9c102_attach_sensor(struct sn9c102_device* cam, - struct sn9c102_sensor* sensor); - -/* - Each SN9C10x camera has proper PID/VID identifiers. - SN9C103 supports multiple interfaces, but we only handle the video class - interface. -*/ -#define SN9C102_USB_DEVICE(vend, prod, intclass) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ - USB_DEVICE_ID_MATCH_INT_CLASS, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = (intclass) - -#define SN9C102_ID_TABLE \ -static const struct usb_device_id sn9c102_id_table[] = { \ - { USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */ \ - { USB_DEVICE(0x0c45, 0x6005), }, /* TAS5110C1B */ \ - { USB_DEVICE(0x0c45, 0x6007), }, \ - { USB_DEVICE(0x0c45, 0x6009), }, /* PAS106B */ \ - { USB_DEVICE(0x0c45, 0x600d), }, /* PAS106B */ \ - { USB_DEVICE(0x0c45, 0x6024), }, \ - { USB_DEVICE(0x0c45, 0x6025), }, /* TAS5130D1B and TAS5110C1B */ \ - { USB_DEVICE(0x0c45, 0x6028), }, /* PAS202BCB */ \ - { USB_DEVICE(0x0c45, 0x6029), }, /* PAS106B */ \ - { USB_DEVICE(0x0c45, 0x602a), }, /* HV7131D */ \ - { USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */ \ - { USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */ \ - { USB_DEVICE(0x0c45, 0x602d), }, \ - { USB_DEVICE(0x0c45, 0x602e), }, /* OV7630 */ \ - { USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x6080, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x6082, 0xff), }, /* MI0343 & MI0360 */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x6083, 0xff), }, /* HV7131[D|E1] */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131/R */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60a2, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60a3, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60a8, 0xff), }, /* PAS106B */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x60aa, 0xff), }, /* TAS5130D1B */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x60ab, 0xff), }, /* TAS5110C1B */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x60ac, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60ae, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60af, 0xff), }, /* PAS202BCB */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x60b0, 0xff), }, /* OV7630 (?) */ \ - { SN9C102_USB_DEVICE(0x0c45, 0x60b2, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60b3, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60b8, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60ba, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60bb, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60bc, 0xff), }, \ - { SN9C102_USB_DEVICE(0x0c45, 0x60be, 0xff), }, \ - { } \ -}; - -/*****************************************************************************/ - -/* - Read/write routines: they always return -1 on error, 0 or the read value - otherwise. NOTE that a real read operation is not supported by the SN9C10X - chip for some of its registers. To work around this problem, a pseudo-read - call is provided instead: it returns the last successfully written value - on the register (0 if it has never been written), the usual -1 on error. -*/ - -/* The "try" I2C I/O versions are used when probing the sensor */ -extern int sn9c102_i2c_try_write(struct sn9c102_device*,struct sn9c102_sensor*, - u8 address, u8 value); -extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*, - u8 address); - -/* - These must be used if and only if the sensor doesn't implement the standard - I2C protocol. There are a number of good reasons why you must use the - single-byte versions of these functions: do not abuse. The first function - writes n bytes, from data0 to datan, to registers 0x09 - 0x09+n of SN9C10X - chip. The second one programs the registers 0x09 and 0x10 with data0 and - data1, and places the n bytes read from the sensor register table in the - buffer pointed by 'buffer'. Both the functions return -1 on error; the write - version returns 0 on success, while the read version returns the first read - byte. -*/ -extern int sn9c102_i2c_try_raw_write(struct sn9c102_device* cam, - struct sn9c102_sensor* sensor, u8 n, - u8 data0, u8 data1, u8 data2, u8 data3, - u8 data4, u8 data5); -extern int sn9c102_i2c_try_raw_read(struct sn9c102_device* cam, - struct sn9c102_sensor* sensor, u8 data0, - u8 data1, u8 n, u8 buffer[]); - -/* To be used after the sensor struct has been attached to the camera struct */ -extern int sn9c102_i2c_write(struct sn9c102_device*, u8 address, u8 value); -extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address); - -/* I/O on registers in the bridge. Could be used by the sensor methods too */ -extern int sn9c102_write_regs(struct sn9c102_device*, u8* buff, u16 index); -extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index); -extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index); - -/* - NOTE: there are no exported debugging functions. To uniform the output you - must use the dev_info()/dev_warn()/dev_err() macros defined in device.h, - already included here, the argument being the struct device '&usbdev->dev' - of the sensor structure. Do NOT use these macros before the sensor is - attached or the kernel will crash! However, you should not need to notify - the user about common errors or other messages, since this is done by the - master module. -*/ - -/*****************************************************************************/ - -enum sn9c102_i2c_sysfs_ops { - SN9C102_I2C_READ = 0x01, - SN9C102_I2C_WRITE = 0x02, -}; - -enum sn9c102_i2c_frequency { /* sensors may support both the frequencies */ - SN9C102_I2C_100KHZ = 0x01, - SN9C102_I2C_400KHZ = 0x02, -}; - -enum sn9c102_i2c_interface { - SN9C102_I2C_2WIRES, - SN9C102_I2C_3WIRES, -}; - -#define SN9C102_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10 - -struct sn9c102_sensor { - char name[32], /* sensor name */ - maintainer[64]; /* name of the mantainer <email> */ - - /* Supported operations through the 'sysfs' interface */ - enum sn9c102_i2c_sysfs_ops sysfs_ops; - - /* - These sensor capabilities must be provided if the SN9C10X controller - needs to communicate through the sensor serial interface by using - at least one of the i2c functions available. - */ - enum sn9c102_i2c_frequency frequency; - enum sn9c102_i2c_interface interface; - - /* - This identifier must be provided if the image sensor implements - the standard I2C protocol. - */ - u8 i2c_slave_id; /* reg. 0x09 */ - - /* - NOTE: Where not noted,most of the functions below are not mandatory. - Set to null if you do not implement them. If implemented, - they must return 0 on success, the proper error otherwise. - */ - - int (*init)(struct sn9c102_device* cam); - /* - This function will be called after the sensor has been attached. - It should be used to initialize the sensor only, but may also - configure part of the SN9C10X chip if necessary. You don't need to - setup picture settings like brightness, contrast, etc.. here, if - the corrisponding controls are implemented (see below), since - they are adjusted in the core driver by calling the set_ctrl() - method after init(), where the arguments are the default values - specified in the v4l2_queryctrl list of supported controls; - Same suggestions apply for other settings, _if_ the corresponding - methods are present; if not, the initialization must configure the - sensor according to the default configuration structures below. - */ - - struct v4l2_queryctrl qctrl[SN9C102_MAX_CTRLS]; - /* - Optional list of default controls, defined as indicated in the - V4L2 API. Menu type controls are not handled by this interface. - */ - - int (*get_ctrl)(struct sn9c102_device* cam, struct v4l2_control* ctrl); - int (*set_ctrl)(struct sn9c102_device* cam, - const struct v4l2_control* ctrl); - /* - You must implement at least the set_ctrl method if you have defined - the list above. The returned value must follow the V4L2 - specifications for the VIDIOC_G|C_CTRL ioctls. V4L2_CID_H|VCENTER - are not supported by this driver, so do not implement them. Also, - you don't have to check whether the passed values are out of bounds, - given that this is done by the core module. - */ - - struct v4l2_cropcap cropcap; - /* - Think the image sensor as a grid of R,G,B monochromatic pixels - disposed according to a particular Bayer pattern, which describes - the complete array of pixels, from (0,0) to (xmax, ymax). We will - use this coordinate system from now on. It is assumed the sensor - chip can be programmed to capture/transmit a subsection of that - array of pixels: we will call this subsection "active window". - It is not always true that the largest achievable active window can - cover the whole array of pixels. The V4L2 API defines another - area called "source rectangle", which, in turn, is a subrectangle of - the active window. The SN9C10X chip is always programmed to read the - source rectangle. - The bounds of both the active window and the source rectangle are - specified in the cropcap substructures 'bounds' and 'defrect'. - By default, the source rectangle should cover the largest possible - area. Again, it is not always true that the largest source rectangle - can cover the entire active window, although it is a rare case for - the hardware we have. The bounds of the source rectangle _must_ be - multiple of 16 and must use the same coordinate system as indicated - before; their centers shall align initially. - If necessary, the sensor chip must be initialized during init() to - set the bounds of the active sensor window; however, by default, it - usually covers the largest achievable area (maxwidth x maxheight) - of pixels, so no particular initialization is needed, if you have - defined the correct default bounds in the structures. - See the V4L2 API for further details. - NOTE: once you have defined the bounds of the active window - (struct cropcap.bounds) you must not change them.anymore. - Only 'bounds' and 'defrect' fields are mandatory, other fields - will be ignored. - */ - - int (*set_crop)(struct sn9c102_device* cam, - const struct v4l2_rect* rect); - /* - To be called on VIDIOC_C_SETCROP. The core module always calls a - default routine which configures the appropriate SN9C10X regs (also - scaling), but you may need to override/adjust specific stuff. - 'rect' contains width and height values that are multiple of 16: in - case you override the default function, you always have to program - the chip to match those values; on error return the corresponding - error code without rolling back. - NOTE: in case, you must program the SN9C10X chip to get rid of - blank pixels or blank lines at the _start_ of each line or - frame after each HSYNC or VSYNC, so that the image starts with - real RGB data (see regs 0x12, 0x13) (having set H_SIZE and, - V_SIZE you don't have to care about blank pixels or blank - lines at the end of each line or frame). - */ - - struct v4l2_pix_format pix_format; - /* - What you have to define here are: 1) initial 'width' and 'height' of - the target rectangle 2) the initial 'pixelformat', which can be - either V4L2_PIX_FMT_SN9C10X (for compressed video) or - V4L2_PIX_FMT_SBGGR8 3) 'priv', which we'll be used to indicate the - number of bits per pixel for uncompressed video, 8 or 9 (despite the - current value of 'pixelformat'). - NOTE 1: both 'width' and 'height' _must_ be either 1/1 or 1/2 or 1/4 - of cropcap.defrect.width and cropcap.defrect.height. I - suggest 1/1. - NOTE 2: The initial compression quality is defined by the first bit - of reg 0x17 during the initialization of the image sensor. - NOTE 3: as said above, you have to program the SN9C10X chip to get - rid of any blank pixels, so that the output of the sensor - matches the RGB bayer sequence (i.e. BGBGBG...GRGRGR). - */ - - int (*set_pix_format)(struct sn9c102_device* cam, - const struct v4l2_pix_format* pix); - /* - To be called on VIDIOC_S_FMT, when switching from the SBGGR8 to - SN9C10X pixel format or viceversa. On error return the corresponding - error code without rolling back. - */ - - /* - Do NOT write to the data below, it's READ ONLY. It is used by the - core module to store successfully updated values of the above - settings, for rollbacks..etc..in case of errors during atomic I/O - */ - struct v4l2_queryctrl _qctrl[SN9C102_MAX_CTRLS]; - struct v4l2_rect _rect; -}; - -/*****************************************************************************/ - -/* Private ioctl's for control settings supported by some image sensors */ -#define SN9C102_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE -#define SN9C102_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1 -#define SN9C102_V4L2_CID_RESET_LEVEL V4L2_CID_PRIVATE_BASE + 2 -#define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE V4L2_CID_PRIVATE_BASE + 3 -#define SN9C102_V4L2_CID_GAMMA V4L2_CID_PRIVATE_BASE + 4 -#define SN9C102_V4L2_CID_BAND_FILTER V4L2_CID_PRIVATE_BASE + 5 -#define SN9C102_V4L2_CID_BRIGHT_LEVEL V4L2_CID_PRIVATE_BASE + 6 - -#endif /* _SN9C102_SENSOR_H_ */ |
