diff options
Diffstat (limited to 'drivers/usb/host')
-rw-r--r-- | drivers/usb/host/ehci-mxc.c | 15 | ||||
-rw-r--r-- | drivers/usb/host/isp1362-hcd.c | 15 | ||||
-rw-r--r-- | drivers/usb/host/ohci-pxa27x.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/r8a66597-hcd.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/xhci-mem.c | 26 | ||||
-rw-r--r-- | drivers/usb/host/xhci-ring.c | 73 | ||||
-rw-r--r-- | drivers/usb/host/xhci.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/xhci.h | 2 |
8 files changed, 104 insertions, 33 deletions
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 544ccfd..a8ad8ac 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -182,7 +182,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) } clk_enable(priv->usbclk); - if (!cpu_is_mx35()) { + if (!cpu_is_mx35() && !cpu_is_mx25()) { priv->ahbclk = clk_get(dev, "usb_ahb"); if (IS_ERR(priv->ahbclk)) { ret = PTR_ERR(priv->ahbclk); @@ -207,10 +207,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) /* Initialize the transceiver */ if (pdata->otg) { pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET; - if (otg_init(pdata->otg) != 0) - dev_err(dev, "unable to init transceiver\n"); - else if (otg_set_vbus(pdata->otg, 1) != 0) + ret = otg_init(pdata->otg); + if (ret) { + dev_err(dev, "unable to init transceiver, probably missing\n"); + ret = -ENODEV; + goto err_add; + } + ret = otg_set_vbus(pdata->otg, 1); + if (ret) { dev_err(dev, "unable to enable vbus on transceiver\n"); + goto err_add; + } } priv->hcd = hcd; diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 20a0dfe0..0587ad4 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2224,12 +2224,9 @@ static void remove_debug_file(struct isp1362_hcd *isp1362_hcd) /*-------------------------------------------------------------------------*/ -static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) +static void __isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) { int tmp = 20; - unsigned long flags; - - spin_lock_irqsave(&isp1362_hcd->lock, flags); isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC); isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR); @@ -2240,6 +2237,14 @@ static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) } if (!tmp) pr_err("Software reset timeout\n"); +} + +static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) +{ + unsigned long flags; + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + __isp1362_sw_reset(isp1362_hcd); spin_unlock_irqrestore(&isp1362_hcd->lock, flags); } @@ -2418,7 +2423,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd) if (isp1362_hcd->board && isp1362_hcd->board->reset) isp1362_hcd->board->reset(hcd->self.controller, 1); else - isp1362_sw_reset(isp1362_hcd); + __isp1362_sw_reset(isp1362_hcd); if (isp1362_hcd->board && isp1362_hcd->board->clock) isp1362_hcd->board->clock(hcd->self.controller, 0); diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index a18debd..4181638 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -203,7 +203,7 @@ static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci) __raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR); } -#ifdef CONFIG_CPU_PXA27x +#ifdef CONFIG_PXA27x extern void pxa27x_clear_otgph(void); #else #define pxa27x_clear_otgph() do {} while (0) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 1a2bb4c..77be3c2 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1065,7 +1065,7 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port) else if (speed == LSMODE) rh->port |= USB_PORT_STAT_LOW_SPEED; - rh->port &= USB_PORT_STAT_RESET; + rh->port &= ~USB_PORT_STAT_RESET; rh->port |= USB_PORT_STAT_ENABLE; } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index fd9e03a..2eb658d 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -835,6 +835,27 @@ fail: return 0; } +void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, + struct usb_device *udev) +{ + struct xhci_virt_device *virt_dev; + struct xhci_ep_ctx *ep0_ctx; + struct xhci_ring *ep_ring; + + virt_dev = xhci->devs[udev->slot_id]; + ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0); + ep_ring = virt_dev->eps[0].ring; + /* + * FIXME we don't keep track of the dequeue pointer very well after a + * Set TR dequeue pointer, so we're setting the dequeue pointer of the + * host to our enqueue pointer. This should only be called after a + * configured device has reset, so all control transfers should have + * been completed or cancelled before the reset. + */ + ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue); + ep0_ctx->deq |= ep_ring->cycle_state; +} + /* Setup an xHCI virtual device for a Set Address command */ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev) { @@ -1002,7 +1023,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, return EP_INTERVAL(interval); } -/* The "Mult" field in the endpoint context is only set for SuperSpeed devices. +/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps. * High speed endpoint descriptors can define "the number of additional * transaction opportunities per microframe", but that goes in the Max Burst * endpoint context field. @@ -1010,7 +1031,8 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, static inline u32 xhci_get_endpoint_mult(struct usb_device *udev, struct usb_host_endpoint *ep) { - if (udev->speed != USB_SPEED_SUPER) + if (udev->speed != USB_SPEED_SUPER || + !usb_endpoint_xfer_isoc(&ep->desc)) return 0; return ep->ss_ep_comp.bmAttributes; } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9012098..bfc99a9 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -182,8 +182,12 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer * set, but other sections talk about dealing with the chain bit set. This was * fixed in the 0.96 specification errata, but we have to assume that all 0.95 * xHCI hardware can't handle the chain bit being cleared on a link TRB. + * + * @more_trbs_coming: Will you enqueue more TRBs before calling + * prepare_transfer()? */ -static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) +static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, + bool consumer, bool more_trbs_coming) { u32 chain; union xhci_trb *next; @@ -199,15 +203,28 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer while (last_trb(xhci, ring, ring->enq_seg, next)) { if (!consumer) { if (ring != xhci->event_ring) { - if (chain) { - next->link.control |= TRB_CHAIN; - - /* Give this link TRB to the hardware */ - wmb(); - next->link.control ^= TRB_CYCLE; - } else { + /* + * If the caller doesn't plan on enqueueing more + * TDs before ringing the doorbell, then we + * don't want to give the link TRB to the + * hardware just yet. We'll give the link TRB + * back in prepare_ring() just before we enqueue + * the TD at the top of the ring. + */ + if (!chain && !more_trbs_coming) break; + + /* If we're not dealing with 0.95 hardware, + * carry over the chain bit of the previous TRB + * (which may mean the chain bit is cleared). + */ + if (!xhci_link_trb_quirk(xhci)) { + next->link.control &= ~TRB_CHAIN; + next->link.control |= chain; } + /* Give this link TRB to the hardware */ + wmb(); + next->link.control ^= TRB_CYCLE; } /* Toggle the cycle bit after the last ring segment. */ if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { @@ -1707,9 +1724,12 @@ void xhci_handle_event(struct xhci_hcd *xhci) /* * Generic function for queueing a TRB on a ring. * The caller must have checked to make sure there's room on the ring. + * + * @more_trbs_coming: Will you enqueue more TRBs before calling + * prepare_transfer()? */ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, - bool consumer, + bool consumer, bool more_trbs_coming, u32 field1, u32 field2, u32 field3, u32 field4) { struct xhci_generic_trb *trb; @@ -1719,7 +1739,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, trb->field[1] = field2; trb->field[2] = field3; trb->field[3] = field4; - inc_enq(xhci, ring, consumer); + inc_enq(xhci, ring, consumer, more_trbs_coming); } /* @@ -1988,6 +2008,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, int trb_buff_len, this_sg_len, running_total; bool first_trb; u64 addr; + bool more_trbs_coming; struct xhci_generic_trb *start_trb; int start_cycle; @@ -2073,7 +2094,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, + if (num_trbs > 1) + more_trbs_coming = true; + else + more_trbs_coming = false; + queue_trb(xhci, ep_ring, false, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -2124,6 +2149,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, int num_trbs; struct xhci_generic_trb *start_trb; bool first_trb; + bool more_trbs_coming; int start_cycle; u32 field, length_field; @@ -2212,7 +2238,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, + if (num_trbs > 1) + more_trbs_coming = true; + else + more_trbs_coming = false; + queue_trb(xhci, ep_ring, false, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -2291,7 +2321,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Queue setup TRB - see section 6.4.1.2.1 */ /* FIXME better way to translate setup_packet into two u32 fields? */ setup = (struct usb_ctrlrequest *) urb->setup_packet; - queue_trb(xhci, ep_ring, false, + queue_trb(xhci, ep_ring, false, true, /* FIXME endianness is probably going to bite my ass here. */ setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16, setup->wIndex | setup->wLength << 16, @@ -2307,7 +2337,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) field |= TRB_DIR_IN; - queue_trb(xhci, ep_ring, false, + queue_trb(xhci, ep_ring, false, true, lower_32_bits(urb->transfer_dma), upper_32_bits(urb->transfer_dma), length_field, @@ -2324,7 +2354,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field = 0; else field = TRB_DIR_IN; - queue_trb(xhci, ep_ring, false, + queue_trb(xhci, ep_ring, false, false, 0, 0, TRB_INTR_TARGET(0), @@ -2350,18 +2380,21 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4, bool command_must_succeed) { int reserved_trbs = xhci->cmd_ring_reserved_trbs; + int ret; + if (!command_must_succeed) reserved_trbs++; - if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) { - if (!in_interrupt()) - xhci_err(xhci, "ERR: No room for command on command ring\n"); + ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING, + reserved_trbs, GFP_ATOMIC); + if (ret < 0) { + xhci_err(xhci, "ERR: No room for command on command ring\n"); if (command_must_succeed) xhci_err(xhci, "ERR: Reserved TRB counting for " "unfailable commands failed.\n"); - return -ENOMEM; + return ret; } - queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, + queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3, field4 | xhci->cmd_ring->cycle_state); return 0; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 27345cd..3998f72 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2134,6 +2134,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* If this is a Set Address to an unconfigured device, setup ep 0 */ if (!udev->config) xhci_setup_addressable_virt_dev(xhci, udev); + else + xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev); /* Otherwise, assume the core has the device configured how it wants */ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8b4b7d3..6c7e343 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1292,6 +1292,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags); void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id); int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags); int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev); +void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, + struct usb_device *udev); unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc); unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc); unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index); |