diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/Kconfig | 28 | ||||
| -rw-r--r-- | drivers/usb/host/Makefile | 3 | ||||
| -rw-r--r-- | drivers/usb/host/hwa-hc.c | 925 | ||||
| -rw-r--r-- | drivers/usb/host/whci/Kbuild | 11 | ||||
| -rw-r--r-- | drivers/usb/host/whci/asl.c | 367 | ||||
| -rw-r--r-- | drivers/usb/host/whci/hcd.c | 339 | ||||
| -rw-r--r-- | drivers/usb/host/whci/hw.c | 87 | ||||
| -rw-r--r-- | drivers/usb/host/whci/init.c | 188 | ||||
| -rw-r--r-- | drivers/usb/host/whci/int.c | 95 | ||||
| -rw-r--r-- | drivers/usb/host/whci/pzl.c | 398 | ||||
| -rw-r--r-- | drivers/usb/host/whci/qset.c | 567 | ||||
| -rw-r--r-- | drivers/usb/host/whci/whcd.h | 197 | ||||
| -rw-r--r-- | drivers/usb/host/whci/whci-hc.h | 416 | ||||
| -rw-r--r-- | drivers/usb/host/whci/wusb.c | 241 |
14 files changed, 3862 insertions, 0 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 228797e..72fb655 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -305,3 +305,31 @@ config SUPERH_ON_CHIP_R8A66597 help This driver enables support for the on-chip R8A66597 in the SH7366 and SH7723 processors. + +config USB_WHCI_HCD + tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on PCI && USB + select USB_WUSB + select UWB_WHCI + help + A driver for PCI-based Wireless USB Host Controllers that are + compliant with the WHCI specification. + + To compile this driver a module, choose M here: the module + will be called "whci-hcd". + +config USB_HWA_HCD + tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on USB + select USB_WUSB + select UWB_HWA + help + This driver enables you to connect Wireless USB devices to + your system using a Host Wire Adaptor USB dongle. This is an + UWB Radio Controller and WUSB Host Controller connected to + your machine via USB (specified in WUSB1.0). + + To compile this driver a module, choose M here: the module + will be called "hwa-hc". diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index f1edda2..23be222 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -8,6 +8,8 @@ endif isp1760-objs := isp1760-hcd.o isp1760-if.o +obj-$(CONFIG_USB_WHCI_HCD) += whci/ + obj-$(CONFIG_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o @@ -19,3 +21,4 @@ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o +obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c new file mode 100644 index 0000000..64be4d8 --- /dev/null +++ b/drivers/usb/host/hwa-hc.c @@ -0,0 +1,925 @@ +/* + * Host Wire Adapter: + * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * The HWA driver is a simple layer that forwards requests to the WAHC + * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host + * Controller) layers. + * + * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB + * Host Controller that is connected to your system via USB (a USB + * dongle that implements a USB host...). There is also a Device Wired + * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for + * transferring data (it is after all a USB host connected via + * Wireless USB), we have a common layer called Wire Adapter Host + * Controller that does all the hard work. The WUSBHC (Wireless USB + * Host Controller) is the part common to WUSB Host Controllers, the + * HWA and the PCI-based one, that is implemented following the WHCI + * spec. All these layers are implemented in ../wusbcore. + * + * The main functions are hwahc_op_urb_{en,de}queue(), that pass the + * job of converting a URB to a Wire Adapter + * + * Entry points: + * + * hwahc_driver_*() Driver initialization, registration and + * teardown. + * + * hwahc_probe() New device came up, create an instance for + * it [from device enumeration]. + * + * hwahc_disconnect() Remove device instance [from device + * enumeration]. + * + * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for + * starting/stopping/etc (some might be made also + * DWA). + */ +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/workqueue.h> +#include <linux/wait.h> +#include <linux/completion.h> +#include "../wusbcore/wa-hc.h" +#include "../wusbcore/wusbhc.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +struct hwahc { + struct wusbhc wusbhc; /* has to be 1st */ + struct wahc wa; + u8 buffer[16]; /* for misc usb transactions */ +}; + +/** + * FIXME should be wusbhc + * + * NOTE: we need to cache the Cluster ID because later...there is no + * way to get it :) + */ +static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id) +{ + int result; + struct wusbhc *wusbhc = &hwahc->wusbhc; + struct wahc *wa = &hwahc->wa; + struct device *dev = &wa->usb_iface->dev; + + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_CLUSTER_ID, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + cluster_id, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n", + cluster_id, result); + else + wusbhc->cluster_id = cluster_id; + dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id); + return result; +} + +static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_NUM_DNTS, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + interval << 8 | slots, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); +} + +/* + * Reset a WUSB host controller and wait for it to complete doing it. + * + * @usb_hcd: Pointer to WUSB Host Controller instance. + * + */ +static int hwahc_op_reset(struct usb_hcd *usb_hcd) +{ + int result; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + mutex_lock(&wusbhc->mutex); + wa_nep_disarm(&hwahc->wa); + result = __wa_set_feature(&hwahc->wa, WA_RESET); + if (result < 0) { + dev_err(dev, "error commanding HC to reset: %d\n", result); + goto error_unlock; + } + d_printf(3, dev, "reset: waiting for device to change state\n"); + result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0); + if (result < 0) { + dev_err(dev, "error waiting for HC to reset: %d\n", result); + goto error_unlock; + } +error_unlock: + mutex_unlock(&wusbhc->mutex); + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return result; +} + +/* + * FIXME: break this function up + */ +static int hwahc_op_start(struct usb_hcd *usb_hcd) +{ + u8 addr; + int result; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + /* Set up a Host Info WUSB Information Element */ + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + result = -ENOSPC; + mutex_lock(&wusbhc->mutex); + /* Start the numbering from the top so that the bottom + * range of the unauth addr space is used for devices, + * the top for HCs; use 0xfe - RC# */ + addr = wusb_cluster_id_get(); + if (addr == 0) + goto error_cluster_id_get; + result = __hwahc_set_cluster_id(hwahc, addr); + if (result < 0) + goto error_set_cluster_id; + + result = wa_nep_arm(&hwahc->wa, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "cannot listen to notifications: %d\n", result); + goto error_stop; + } + usb_hcd->uses_new_polling = 1; + usb_hcd->poll_rh = 1; + usb_hcd->state = HC_STATE_RUNNING; + result = 0; +out: + mutex_unlock(&wusbhc->mutex); + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return result; + +error_stop: + __wa_stop(&hwahc->wa); +error_set_cluster_id: + wusb_cluster_id_put(wusbhc->cluster_id); +error_cluster_id_get: + goto out; + +} + +/* + * FIXME: break this function up + */ +static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) +{ + int result; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + /* Set up a Host Info WUSB Information Element */ + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + result = -ENOSPC; + + result = __wa_set_feature(&hwahc->wa, WA_ENABLE); + if (result < 0) { + dev_err(dev, "error commanding HC to start: %d\n", result); + goto error_stop; + } + result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE); + if (result < 0) { + dev_err(dev, "error waiting for HC to start: %d\n", result); + goto error_stop; + } + result = 0; +out: + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return result; + +error_stop: + result = __wa_clear_feature(&hwahc->wa, WA_ENABLE); + goto out; +} + +static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__, + usb_hcd, hwahc, *(unsigned long *) &msg); + return -ENOSYS; +} + +static int hwahc_op_resume(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, hwahc); + return -ENOSYS; +} + +static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc) +{ + int result; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + /* Nothing for now */ + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return; +} + +/* + * No need to abort pipes, as when this is called, all the children + * has been disconnected and that has done it [through + * usb_disable_interface() -> usb_disable_endpoint() -> + * hwahc_op_ep_disable() - >rpipe_ep_disable()]. + */ +static void hwahc_op_stop(struct usb_hcd *usb_hcd) +{ + int result; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + struct device *dev = &wa->usb_iface->dev; + + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + mutex_lock(&wusbhc->mutex); + wusbhc_stop(wusbhc); + wa_nep_disarm(&hwahc->wa); + result = __wa_stop(&hwahc->wa); + wusb_cluster_id_put(wusbhc->cluster_id); + mutex_unlock(&wusbhc->mutex); + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return; +} + +static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, hwahc); + return -ENOSYS; +} + +static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, + gfp_t gfp) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp); +} + +static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, + int status) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + return wa_urb_dequeue(&hwahc->wa, urb); +} + +/* + * Release resources allocated for an endpoint + * + * If there is an associated rpipe to this endpoint, go ahead and put it. + */ +static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd, + struct usb_host_endpoint *ep) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + rpipe_ep_disable(&hwahc->wa, ep); +} + +/* + * Set the UWB MAS allocation for the WUSB cluster + * + * @stream_index: stream to use (-1 for cancelling the allocation) + * @mas: mas bitmap to use + */ +static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index, + const struct uwb_mas_bm *mas) +{ + int result; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + struct device *dev = &wa->usb_iface->dev; + u8 mas_le[UWB_NUM_MAS/8]; + + /* Set the stream index */ + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_STREAM_IDX, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + stream_index, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Cannot set WUSB stream index: %d\n", result); + goto out; + } + uwb_mas_bm_copy_le(mas_le, mas); + /* Set the MAS allocation */ + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_WUSB_MAS, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + mas_le, 32, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result); +out: + return result; +} + +/* + * Add an IE to the host's MMC + * + * @interval: See WUSB1.0[8.5.3.1] + * @repeat_cnt: See WUSB1.0[8.5.3.1] + * @handle: See WUSB1.0[8.5.3.1] + * @wuie: Pointer to the header of the WUSB IE data to add. + * MUST BE allocated in a kmalloc buffer (no stack or + * vmalloc). + * + * NOTE: the format of the WUSB IEs for MMCs are different to the + * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length + + * Id in WUSB IEs). Standards...you gotta love'em. + */ +static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval, + u8 repeat_cnt, u8 handle, + struct wuie_hdr *wuie) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_ADD_MMC_IE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + interval << 8 | repeat_cnt, + handle << 8 | iface_no, + wuie, wuie->bLength, 1000 /* FIXME: arbitrary */); +} + +/* + * Remove an IE to the host's MMC + * + * @handle: See WUSB1.0[8.5.3.1] + */ +static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_REMOVE_MMC_IE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, handle << 8 | iface_no, + NULL, 0, 1000 /* FIXME: arbitrary */); +} + +/* + * Update device information for a given fake port + * + * @port_idx: Fake port to which device is connected (wusbhc index, not + * USB port number). + */ +static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc, + struct wusb_dev *wusb_dev) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + struct hwa_dev_info *dev_info; + int ret; + + /* fill out the Device Info buffer and send it */ + dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL); + if (!dev_info) + return -ENOMEM; + uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability, + &wusb_dev->availability); + dev_info->bDeviceAddress = wusb_dev->addr; + + /* + * If the descriptors haven't been read yet, use a default PHY + * rate of 53.3 Mbit/s only. The correct value will be used + * when this will be called again as part of the + * authentication process (which occurs after the descriptors + * have been read). + */ + if (wusb_dev->wusb_cap_descr) + dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates; + else + dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53); + + ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_DEV_INFO, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, wusb_dev->port_idx << 8 | iface_no, + dev_info, sizeof(struct hwa_dev_info), + 1000 /* FIXME: arbitrary */); + kfree(dev_info); + return ret; +} + +/* + * Set host's idea of which encryption (and key) method to use when + * talking to ad evice on a given port. + * + * If key is NULL, it means disable encryption for that "virtual port" + * (used when we disconnect). + */ +static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *key, size_t key_size, + u8 key_idx) +{ + int result = -ENOMEM; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + struct usb_key_descriptor *keyd; + size_t keyd_len; + + keyd_len = sizeof(*keyd) + key_size; + keyd = kzalloc(keyd_len, GFP_KERNEL); + if (keyd == NULL) + return -ENOMEM; + + keyd->bLength = keyd_len; + keyd->bDescriptorType = USB_DT_KEY; + keyd->tTKID[0] = (tkid >> 0) & 0xff; + keyd->tTKID[1] = (tkid >> 8) & 0xff; + keyd->tTKID[2] = (tkid >> 16) & 0xff; + memcpy(keyd->bKeyData, key, key_size); + + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + USB_REQ_SET_DESCRIPTOR, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + USB_DT_KEY << 8 | key_idx, + port_idx << 8 | iface_no, + keyd, keyd_len, 1000 /* FIXME: arbitrary */); + + memset(keyd, 0, sizeof(*keyd)); /* clear keys etc. */ + kfree(keyd); + return result; +} + +/* + * Set host's idea of which encryption (and key) method to use when + * talking to ad evice on a given port. + * + * If key is NULL, it means disable encryption for that "virtual port" + * (used when we disconnect). + */ +static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *key, size_t key_size) +{ + int result = -ENOMEM; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + u8 encryption_value; + + /* Tell the host which key to use to talk to the device */ + if (key) { + u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK, + WUSB_KEY_INDEX_ORIGINATOR_HOST); + + result = __hwahc_dev_set_key(wusbhc, port_idx, tkid, + key, key_size, key_idx); + if (result < 0) + goto error_set_key; + encryption_value = wusbhc->ccm1_etd->bEncryptionValue; + } else { + /* FIXME: this should come from wusbhc->etd[UNSECURE].value */ + encryption_value = 0; + } + + /* Set the encryption type for commmunicating with the device */ + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + USB_REQ_SET_ENCRYPTION, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + encryption_value, port_idx << 8 | iface_no, + NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(wusbhc->dev, "Can't set host's WUSB encryption for " + "port index %u to %s (value %d): %d\n", port_idx, + wusb_et_name(wusbhc->ccm1_etd->bEncryptionType), + wusbhc->ccm1_etd->bEncryptionValue, result); +error_set_key: + return result; +} + +/* + * Set host's GTK key + */ +static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid, + const void *key, size_t key_size) +{ + u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, + WUSB_KEY_INDEX_ORIGINATOR_HOST); + + return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx); +} + +/* + * Get the Wire Adapter class-specific descriptor + * + * NOTE: this descriptor comes with the big bundled configuration + * descriptor that includes the interfaces' and endpoints', so + * we just look for it in the cached copy kept by the USB stack. + * + * NOTE2: We convert LE fields to CPU order. + */ +static int wa_fill_descr(struct wahc *wa) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + char *itr; + struct usb_device *usb_dev = wa->usb_dev; + struct usb_descriptor_header *hdr; + struct usb_wa_descriptor *wa_descr; + size_t itr_size, actconfig_idx; + + actconfig_idx = (usb_dev->actconfig - usb_dev->config) / + sizeof(usb_dev->config[0]); + itr = usb_dev->rawdescriptors[actconfig_idx]; + itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); + while (itr_size >= sizeof(*hdr)) { + hdr = (struct usb_descriptor_header *) itr; + d_printf(3, dev, "Extra device descriptor: " + "type %02x/%u bytes @ %zu (%zu left)\n", + hdr->bDescriptorType, hdr->bLength, + (itr - usb_dev->rawdescriptors[actconfig_idx]), + itr_size); + if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER) + goto found; + itr += hdr->bLength; + itr_size -= hdr->bLength; + } + dev_err(dev, "cannot find Wire Adapter Class descriptor\n"); + return -ENODEV; + +found: + result = -EINVAL; + if (hdr->bLength > itr_size) { /* is it available? */ + dev_err(dev, "incomplete Wire Adapter Class descriptor " + "(%zu bytes left, %u needed)\n", + itr_size, hdr->bLength); + goto error; + } + if (hdr->bLength < sizeof(*wa->wa_descr)) { + dev_err(dev, "short Wire Adapter Class descriptor\n"); + goto error; + } + wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; + /* Make LE fields CPU order */ + wa_descr->bcdWAVersion = le16_to_cpu(wa_descr->bcdWAVersion); + wa_descr->wNumRPipes = le16_to_cpu(wa_descr->wNumRPipes); + wa_descr->wRPipeMaxBlock = le16_to_cpu(wa_descr->wRPipeMaxBlock); + if (wa_descr->bcdWAVersion > 0x0100) + dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", + wa_descr->bcdWAVersion & 0xff00 >> 8, + wa_descr->bcdWAVersion & 0x00ff); + result = 0; +error: + return result; +} + +static struct hc_driver hwahc_hc_driver = { + .description = "hwa-hcd", + .product_desc = "Wireless USB HWA host controller", + .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd), + .irq = NULL, /* FIXME */ + .flags = HCD_USB2, /* FIXME */ + .reset = hwahc_op_reset, + .start = hwahc_op_start, + .pci_suspend = hwahc_op_suspend, + .pci_resume = hwahc_op_resume, + .stop = hwahc_op_stop, + .get_frame_number = hwahc_op_get_frame_number, + .urb_enqueue = hwahc_op_urb_enqueue, + .urb_dequeue = hwahc_op_urb_dequeue, + .endpoint_disable = hwahc_op_endpoint_disable, + + .hub_status_data = wusbhc_rh_status_data, + .hub_control = wusbhc_rh_control, + .bus_suspend = wusbhc_rh_suspend, + .bus_resume = wusbhc_rh_resume, + .start_port_reset = wusbhc_rh_start_port_reset, +}; + +static int hwahc_security_create(struct hwahc *hwahc) +{ + int result; + struct wusbhc *wusbhc = &hwahc->wusbhc; + struct usb_device *usb_dev = hwahc->wa.usb_dev; + struct device *dev = &usb_dev->dev; + struct usb_security_descriptor *secd; + struct usb_encryption_descriptor *etd; + void *itr, *top; + size_t itr_size, needed, bytes; + u8 index; + char buf[64]; + + /* Find the host's security descriptors in the config descr bundle */ + index = (usb_dev->actconfig - usb_dev->config) / + sizeof(usb_dev->config[0]); + itr = usb_dev->rawdescriptors[index]; + itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); + top = itr + itr_size; + result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], + le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), + USB_DT_SECURITY, (void **) &secd); + if (result == -1) { + dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); + return 0; + } + needed = sizeof(*secd); + if (top - (void *)secd < needed) { + dev_err(dev, "BUG? Not enough data to process security " + "descriptor header (%zu bytes left vs %zu needed)\n", + top - (void *) secd, needed); + return 0; + } + needed = le16_to_cpu(secd->wTotalLength); + if (top - (void *)secd < needed) { + dev_err(dev, "BUG? Not enough data to process security " + "descriptors (%zu bytes left vs %zu needed)\n", + top - (void *) secd, needed); + return 0; + } + /* Walk over the sec descriptors and store CCM1's on wusbhc */ + itr = (void *) secd + sizeof(*secd); + top = (void *) secd + le16_to_cpu(secd->wTotalLength); + index = 0; + bytes = 0; + while (itr < top) { + etd = itr; + if (top - itr < sizeof(*etd)) { + dev_err(dev, "BUG: bad host security descriptor; " + "not enough data (%zu vs %zu left)\n", + top - itr, sizeof(*etd)); + break; + } + if (etd->bLength < sizeof(*etd)) { + dev_err(dev, "BUG: bad host encryption descriptor; " + "descriptor is too short " + "(%zu vs %zu needed)\n", + (size_t)etd->bLength, sizeof(*etd)); + break; + } + itr += etd->bLength; + bytes += snprintf(buf + bytes, sizeof(buf) - bytes, + "%s (0x%02x) ", + wusb_et_name(etd->bEncryptionType), + etd->bEncryptionValue); + wusbhc->ccm1_etd = etd; + } + dev_info(dev, "supported encryption types: %s\n", buf); + if (wusbhc->ccm1_etd == NULL) { + dev_err(dev, "E: host doesn't support CCM-1 crypto\n"); + return 0; + } + /* Pretty print what we support */ + return 0; +} + +static void hwahc_security_release(struct hwahc *hwahc) +{ + /* nothing to do here so far... */ +} + +static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface) +{ + int result; + struct device *dev = &iface->dev; + struct wusbhc *wusbhc = &hwahc->wusbhc; + struct wahc *wa = &hwahc->wa; + struct usb_device *usb_dev = interface_to_usbdev(iface); + + wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ + wa->usb_iface = usb_get_intf(iface); + wusbhc->dev = dev; + wusbhc->uwb_rc = uwb_rc_get_by_grandpa(iface->dev.parent); + if (wusbhc->uwb_rc == NULL) { + result = -ENODEV; + dev_err(dev, "Cannot get associated UWB Host Controller\n"); + goto error_rc_get; + } + result = wa_fill_descr(wa); /* Get the device descriptor */ + if (result < 0) + goto error_fill_descriptor; + if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) { + dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB " + "adapter (%u ports)\n", wa->wa_descr->bNumPorts); + wusbhc->ports_max = USB_MAXCHILDREN; + } else { + wusbhc->ports_max = wa->wa_descr->bNumPorts; + } + wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs; + wusbhc->start = __hwahc_op_wusbhc_start; + wusbhc->stop = __hwahc_op_wusbhc_stop; + wusbhc->mmcie_add = __hwahc_op_mmcie_add; + wusbhc->mmcie_rm = __hwahc_op_mmcie_rm; + wusbhc->dev_info_set = __hwahc_op_dev_info_set; + wusbhc->bwa_set = __hwahc_op_bwa_set; + wusbhc->set_num_dnts = __hwahc_op_set_num_dnts; + wusbhc->set_ptk = __hwahc_op_set_ptk; + wusbhc->set_gtk = __hwahc_op_set_gtk; + result = hwahc_security_create(hwahc); + if (result < 0) { + dev_err(dev, "Can't initialize security: %d\n", result); + goto error_security_create; + } + wa->wusb = wusbhc; /* FIXME: ugly, need to fix */ + result = wusbhc_create(&hwahc->wusbhc); + if (result < 0) { + dev_err(dev, "Can't create WUSB HC structures: %d\n", result); + goto error_wusbhc_create; + } + result = wa_create(&hwahc->wa, iface); + if (result < 0) + goto error_wa_create; + return 0; + +error_wa_create: + wusbhc_destroy(&hwahc->wusbhc); +error_wusbhc_create: + /* WA Descr fill allocs no resources */ +error_security_create: +error_fill_descriptor: + uwb_rc_put(wusbhc->uwb_rc); +error_rc_get: + usb_put_intf(iface); + usb_put_dev(usb_dev); + return result; +} + +static void hwahc_destroy(struct hwahc *hwahc) +{ + struct wusbhc *wusbhc = &hwahc->wusbhc; + + d_fnstart(1, NULL, "(hwahc %p)\n", hwahc); + mutex_lock(&wusbhc->mutex); + __wa_destroy(&hwahc->wa); + wusbhc_destroy(&hwahc->wusbhc); + hwahc_security_release(hwahc); + hwahc->wusbhc.dev = NULL; + uwb_rc_put(wusbhc->uwb_rc); + usb_put_intf(hwahc->wa.usb_iface); + usb_put_dev(hwahc->wa.usb_dev); + mutex_unlock(&wusbhc->mutex); + d_fnend(1, NULL, "(hwahc %p) = void\n", hwahc); +} + +static void hwahc_init(struct hwahc *hwahc) +{ + wa_init(&hwahc->wa); +} + +static int hwahc_probe(struct usb_interface *usb_iface, + const struct usb_device_id *id) +{ + int result; + struct usb_hcd *usb_hcd; + struct wusbhc *wusbhc; + struct hwahc *hwahc; + struct device *dev = &usb_iface->dev; + + d_fnstart(4, dev, "(%p, %p)\n", usb_iface, id); + result = -ENOMEM; + usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa"); + if (usb_hcd == NULL) { + dev_err(dev, "unable to allocate instance\n"); + goto error_alloc; + } + usb_hcd->wireless = 1; + usb_hcd->flags |= HCD_FLAG_SAW_IRQ; + wusbhc = usb_hcd_to_wusbhc(usb_hcd); + hwahc = container_of(wusbhc, struct hwahc, wusbhc); + hwahc_init(hwahc); + result = hwahc_create(hwahc, usb_iface); + if (result < 0) { + dev_err(dev, "Cannot initialize internals: %d\n", result); + goto error_hwahc_create; + } + result = usb_add_hcd(usb_hcd, 0, 0); + if (result < 0) { + dev_err(dev, "Cannot add HCD: %d\n", result); + goto error_add_hcd; + } + result = wusbhc_b_create(&hwahc->wusbhc); + if (result < 0) { + dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result); + goto error_wusbhc_b_create; + } + d_fnend(4, dev, "(%p, %p) = 0\n", usb_iface, id); + return 0; + +error_wusbhc_b_create: + usb_remove_hcd(usb_hcd); +error_add_hcd: + hwahc_destroy(hwahc); +error_hwahc_create: + usb_put_hcd(usb_hcd); +error_alloc: + d_fnend(4, dev, "(%p, %p) = %d\n", usb_iface, id, result); + return result; +} + +static void hwahc_disconnect(struct usb_interface *usb_iface) +{ + struct usb_hcd *usb_hcd; + struct wusbhc *wusbhc; + struct hwahc *hwahc; + + usb_hcd = usb_get_intfdata(usb_iface); + wusbhc = usb_hcd_to_wusbhc(usb_hcd); + hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + d_fnstart(1, NULL, "(hwahc %p [usb_iface %p])\n", hwahc, usb_iface); + wusbhc_b_destroy(&hwahc->wusbhc); + usb_remove_hcd(usb_hcd); + hwahc_destroy(hwahc); + usb_put_hcd(usb_hcd); + d_fnend(1, NULL, "(hwahc %p [usb_iface %p]) = void\n", hwahc, + usb_iface); +} + +/** USB device ID's that we handle */ +static struct usb_device_id hwahc_id_table[] = { + /* FIXME: use class labels for this */ + { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, + {}, +}; +MODULE_DEVICE_TABLE(usb, hwahc_id_table); + +static struct usb_driver hwahc_driver = { + .name = "hwa-hc", + .probe = hwahc_probe, + .disconnect = hwahc_disconnect, + .id_table = hwahc_id_table, +}; + +static int __init hwahc_driver_init(void) +{ + int result; + result = usb_register(&hwahc_driver); + if (result < 0) { + printk(KERN_ERR "WA-CDS: Cannot register USB driver: %d\n", + result); + goto error_usb_register; + } + return 0; + +error_usb_register: + return result; + +} +module_init(hwahc_driver_init); + +static void __exit hwahc_driver_exit(void) +{ + usb_deregister(&hwahc_driver); +} +module_exit(hwahc_driver_exit); + + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/whci/Kbuild b/drivers/usb/host/whci/Kbuild new file mode 100644 index 0000000..26a3871 --- /dev/null +++ b/drivers/usb/host/whci/Kbuild @@ -0,0 +1,11 @@ +obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o + +whci-hcd-y := \ + asl.o \ + hcd.o \ + hw.o \ + init.o \ + int.o \ + pzl.o \ + qset.o \ + wusb.o diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c new file mode 100644 index 0000000..4d7078e5 --- /dev/null +++ b/drivers/usb/host/whci/asl.c @@ -0,0 +1,367 @@ +/* + * Wireless Host Controller (WHC) asynchronous schedule management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> +#include <linux/usb.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +#if D_LOCAL >= 4 +static void dump_asl(struct whc *whc, const char *tag) +{ + struct device *dev = &whc->umc->dev; + struct whc_qset *qset; + + d_printf(4, dev, "ASL %s\n", tag); + + list_for_each_entry(qset, &whc->async_list, list_node) { + dump_qset(qset, dev); + } +} +#else +static inline void dump_asl(struct whc *whc, const char *tag) +{ +} +#endif + + +static void qset_get_next_prev(struct whc *whc, struct whc_qset *qset, + struct whc_qset **next, struct whc_qset **prev) +{ + struct list_head *n, *p; + + BUG_ON(list_empty(&whc->async_list)); + + n = qset->list_node.next; + if (n == &whc->async_list) + n = n->next; + p = qset->list_node.prev; + if (p == &whc->async_list) + p = p->prev; + + *next = container_of(n, struct whc_qset, list_node); + *prev = container_of(p, struct whc_qset, list_node); + +} + +static void asl_qset_insert_begin(struct whc *whc, struct whc_qset *qset) +{ + list_move(&qset->list_node, &whc->async_list); + qset->in_sw_list = true; +} + +static void asl_qset_insert(struct whc *whc, struct whc_qset *qset) +{ + struct whc_qset *next, *prev; + + qset_clear(whc, qset); + + /* Link into ASL. */ + qset_get_next_prev(whc, qset, &next, &prev); + whc_qset_set_link_ptr(&qset->qh.link, next->qset_dma); + whc_qset_set_link_ptr(&prev->qh.link, qset->qset_dma); + qset->in_hw_list = true; +} + +static void asl_qset_remove(struct whc *whc, struct whc_qset *qset) +{ + struct whc_qset *prev, *next; + + qset_get_next_prev(whc, qset, &next, &prev); + + list_move(&qset->list_node, &whc->async_removed_list); + qset->in_sw_list = false; + + /* + * No more qsets in the ASL? The caller must stop the ASL as + * it's no longer valid. + */ + if (list_empty(&whc->async_list)) + return; + + /* Remove from ASL. */ + whc_qset_set_link_ptr(&prev->qh.link, next->qset_dma); + qset->in_hw_list = false; +} + +/** + * process_qset - process any recently inactivated or halted qTDs in a + * qset. + * + * After inactive qTDs are removed, new qTDs can be added if the + * urb queue still contains URBs. + * + * Returns any additional WUSBCMD bits for the ASL sync command (i.e., + * WUSBCMD_ASYNC_QSET_RM if a halted qset was removed). + */ +static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) +{ + enum whc_update update = 0; + uint32_t status = 0; + + while (qset->ntds) { + struct whc_qtd *td; + int t; + + t = qset->td_start; + td = &qset->qtd[qset->td_start]; + status = le32_to_cpu(td->status); + + /* + * Nothing to do with a still active qTD. + */ + if (status & QTD_STS_ACTIVE) + break; + + if (status & QTD_STS_HALTED) { + /* Ug, an error. */ + process_halted_qtd(whc, qset, td); + goto done; + } + + /* Mmm, a completed qTD. */ + process_inactive_qtd(whc, qset, td); + } + + update |= qset_add_qtds(whc, qset); + +done: + /* + * Remove this qset from the ASL if requested, but only if has + * no qTDs. + */ + if (qset->remove && qset->ntds == 0) { + asl_qset_remove(whc, qset); + update |= WHC_UPDATE_REMOVED; + } + return update; +} + +void asl_start(struct whc *whc) +{ + struct whc_qset *qset; + + qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); + + le_writeq(qset->qset_dma | QH_LINK_NTDS(8), whc->base + WUSBASYNCLISTADDR); + + whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, WUSBCMD_ASYNC_EN); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_ASYNC_SCHED, WUSBSTS_ASYNC_SCHED, + 1000, "start ASL"); +} + +void asl_stop(struct whc *whc) +{ + whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, 0); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_ASYNC_SCHED, 0, + 1000, "stop ASL"); +} + +void asl_update(struct whc *whc, uint32_t wusbcmd) +{ + whc_write_wusbcmd(whc, wusbcmd, wusbcmd); + wait_event(whc->async_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0); +} + +/** + * scan_async_work - scan the ASL for qsets to process. + * + * Process each qset in the ASL in turn and then signal the WHC that + * the ASL has been updated. + * + * Then start, stop or update the asynchronous schedule as required. + */ +void scan_async_work(struct work_struct *work) +{ + struct whc *whc = container_of(work, struct whc, async_work); + struct whc_qset *qset, *t; + enum whc_update update = 0; + + spin_lock_irq(&whc->lock); + + dump_asl(whc, "before processing"); + + /* + * Transerve the software list backwards so new qsets can be + * safely inserted into the ASL without making it non-circular. + */ + list_for_each_entry_safe_reverse(qset, t, &whc->async_list, list_node) { + if (!qset->in_hw_list) { + asl_qset_insert(whc, qset); + update |= WHC_UPDATE_ADDED; + } + + update |= process_qset(whc, qset); + } + + dump_asl(whc, "after processing"); + + spin_unlock_irq(&whc->lock); + + if (update) { + uint32_t wusbcmd = WUSBCMD_ASYNC_UPDATED | WUSBCMD_ASYNC_SYNCED_DB; + if (update & WHC_UPDATE_REMOVED) + wusbcmd |= WUSBCMD_ASYNC_QSET_RM; + asl_update(whc, wusbcmd); + } + + /* + * Now that the ASL is updated, complete the removal of any + * removed qsets. + */ + spin_lock(&whc->lock); + + list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { + qset_remove_complete(whc, qset); + } + + spin_unlock(&whc->lock); +} + +/** + * asl_urb_enqueue - queue an URB onto the asynchronous list (ASL). + * @whc: the WHCI host controller + * @urb: the URB to enqueue + * @mem_flags: flags for any memory allocations + * + * The qset for the endpoint is obtained and the urb queued on to it. + * + * Work is scheduled to update the hardware's view of the ASL. + */ +int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) +{ + struct whc_qset *qset; + int err; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + qset = get_qset(whc, urb, GFP_ATOMIC); + if (qset == NULL) + err = -ENOMEM; + else + err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); + if (!err) { + usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (!qset->in_sw_list) + asl_qset_insert_begin(whc, qset); + } + + spin_unlock_irqrestore(&whc->lock, flags); + + if (!err) + queue_work(whc->workqueue, &whc->async_work); + + return 0; +} + +/** + * asl_urb_dequeue - remove an URB (qset) from the async list. + * @whc: the WHCI host controller + * @urb: the URB to dequeue + * @status: the current status of the URB + * + * URBs that do yet have qTDs can simply be removed from the software + * queue, otherwise the qset must be removed from the ASL so the qTDs + * can be removed. + */ +int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status) +{ + struct whc_urb *wurb = urb->hcpriv; + struct whc_qset *qset = wurb->qset; + struct whc_std *std, *t; + int ret; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); + if (ret < 0) + goto out; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb == urb) + qset_free_std(whc, std); + else + std->qtd = NULL; /* so this std is re-added when the qset is */ + } + + asl_qset_remove(whc, qset); + wurb->status = status; + wurb->is_async = true; + queue_work(whc->workqueue, &wurb->dequeue_work); + +out: + spin_unlock_irqrestore(&whc->lock, flags); + + return ret; +} + +/** + * asl_qset_delete - delete a qset from the ASL + */ +void asl_qset_delete(struct whc *whc, struct whc_qset *qset) +{ + qset->remove = 1; + queue_work(whc->workqueue, &whc->async_work); + qset_delete(whc, qset); +} + +/** + * asl_init - initialize the asynchronous schedule list + * + * A dummy qset with no qTDs is added to the ASL to simplify removing + * qsets (no need to stop the ASL when the last qset is removed). + */ +int asl_init(struct whc *whc) +{ + struct whc_qset *qset; + + qset = qset_alloc(whc, GFP_KERNEL); + if (qset == NULL) + return -ENOMEM; + + asl_qset_insert_begin(whc, qset); + asl_qset_insert(whc, qset); + + return 0; +} + +/** + * asl_clean_up - free ASL resources + * + * The ASL is stopped and empty except for the dummy qset. + */ +void asl_clean_up(struct whc *whc) +{ + struct whc_qset *qset; + + if (!list_empty(&whc->async_list)) { + qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); + list_del(&qset->list_node); + qset_free(whc, qset); + } +} diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c new file mode 100644 index 0000000..ef3ad4d --- /dev/null +++ b/drivers/usb/host/whci/hcd.c @@ -0,0 +1,339 @@ +/* + * Wireless Host Controller (WHC) driver. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +/* + * One time initialization. + * + * Nothing to do here. + */ +static int whc_reset(struct usb_hcd *usb_hcd) +{ + return 0; +} + +/* + * Start the wireless host controller. + * + * Start device notification. + * + * Put hc into run state, set DNTS parameters. + */ +static int whc_start(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + u8 bcid; + int ret; + + mutex_lock(&wusbhc->mutex); + + le_writel(WUSBINTR_GEN_CMD_DONE + | WUSBINTR_HOST_ERR + | WUSBINTR_ASYNC_SCHED_SYNCED + | WUSBINTR_DNTS_INT + | WUSBINTR_ERR_INT + | WUSBINTR_INT, + whc->base + WUSBINTR); + + /* set cluster ID */ + bcid = wusb_cluster_id_get(); + ret = whc_set_cluster_id(whc, bcid); + if (ret < 0) + goto out; + wusbhc->cluster_id = bcid; + + /* start HC */ + whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN); + + usb_hcd->uses_new_polling = 1; + usb_hcd->poll_rh = 1; + usb_hcd->state = HC_STATE_RUNNING; + +out: + mutex_unlock(&wusbhc->mutex); + return ret; +} + + +/* + * Stop the wireless host controller. + * + * Stop device notification. + * + * Wait for pending transfer to stop? Put hc into stop state? + */ +static void whc_stop(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + + mutex_lock(&wusbhc->mutex); + + wusbhc_stop(wusbhc); + + /* stop HC */ + le_writel(0, whc->base + WUSBINTR); + whc_write_wusbcmd(whc, WUSBCMD_RUN, 0); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_HCHALTED, WUSBSTS_HCHALTED, + 100, "HC to halt"); + + wusb_cluster_id_put(wusbhc->cluster_id); + + mutex_unlock(&wusbhc->mutex); +} + +static int whc_get_frame_number(struct usb_hcd *usb_hcd) +{ + /* Frame numbers are not applicable to WUSB. */ + return -ENOSYS; +} + + +/* + * Queue an URB to the ASL or PZL + */ +static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + int ret; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_INTERRUPT: + ret = pzl_urb_enqueue(whc, urb, mem_flags); + break; + case PIPE_ISOCHRONOUS: + dev_err(&whc->umc->dev, "isochronous transfers unsupported\n"); + ret = -ENOTSUPP; + break; + case PIPE_CONTROL: + case PIPE_BULK: + default: + ret = asl_urb_enqueue(whc, urb, mem_flags); + break; + }; + + return ret; +} + +/* + * Remove a queued URB from the ASL or PZL. + */ +static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + int ret; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_INTERRUPT: + ret = pzl_urb_dequeue(whc, urb, status); + break; + case PIPE_ISOCHRONOUS: + ret = -ENOTSUPP; + break; + case PIPE_CONTROL: + case PIPE_BULK: + default: + ret = asl_urb_dequeue(whc, urb, status); + break; + }; + + return ret; +} + +/* + * Wait for all URBs to the endpoint to be completed, then delete the + * qset. + */ +static void whc_endpoint_disable(struct usb_hcd *usb_hcd, + struct usb_host_endpoint *ep) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + struct whc_qset *qset; + + qset = ep->hcpriv; + if (qset) { + ep->hcpriv = NULL; + if (usb_endpoint_xfer_bulk(&ep->desc) + || usb_endpoint_xfer_control(&ep->desc)) + asl_qset_delete(whc, qset); + else + pzl_qset_delete(whc, qset); + } +} + +static struct hc_driver whc_hc_driver = { + .description = "whci-hcd", + .product_desc = "Wireless host controller", + .hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd), + .irq = whc_int_handler, + .flags = HCD_USB2, + + .reset = whc_reset, + .start = whc_start, + .stop = whc_stop, + .get_frame_number = whc_get_frame_number, + .urb_enqueue = whc_urb_enqueue, + .urb_dequeue = whc_urb_dequeue, + .endpoint_disable = whc_endpoint_disable, + + .hub_status_data = wusbhc_rh_status_data, + .hub_control = wusbhc_rh_control, + .bus_suspend = wusbhc_rh_suspend, + .bus_resume = wusbhc_rh_resume, + .start_port_reset = wusbhc_rh_start_port_reset, +}; + +static int whc_probe(struct umc_dev *umc) +{ + int ret = -ENOMEM; + struct usb_hcd *usb_hcd; + struct wusbhc *wusbhc = NULL; + struct whc *whc = NULL; + struct device *dev = &umc->dev; + + usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci"); + if (usb_hcd == NULL) { + dev_err(dev, "unable to create hcd\n"); + goto error; + } + + usb_hcd->wireless = 1; + + wusbhc = usb_hcd_to_wusbhc(usb_hcd); + whc = wusbhc_to_whc(wusbhc); + whc->umc = umc; + + ret = whc_init(whc); + if (ret) + goto error; + + wusbhc->dev = dev; + wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent); + if (!wusbhc->uwb_rc) { + ret = -ENODEV; + dev_err(dev, "cannot get radio controller\n"); + goto error; + } + + if (whc->n_devices > USB_MAXCHILDREN) { + dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n", + whc->n_devices); + wusbhc->ports_max = USB_MAXCHILDREN; + } else + wusbhc->ports_max = whc->n_devices; + wusbhc->mmcies_max = whc->n_mmc_ies; + wusbhc->start = whc_wusbhc_start; + wusbhc->stop = whc_wusbhc_stop; + wusbhc->mmcie_add = whc_mmcie_add; + wusbhc->mmcie_rm = whc_mmcie_rm; + wusbhc->dev_info_set = whc_dev_info_set; + wusbhc->bwa_set = whc_bwa_set; + wusbhc->set_num_dnts = whc_set_num_dnts; + wusbhc->set_ptk = whc_set_ptk; + wusbhc->set_gtk = whc_set_gtk; + + ret = wusbhc_create(wusbhc); + if (ret) + goto error_wusbhc_create; + + ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "cannot add HCD: %d\n", ret); + goto error_usb_add_hcd; + } + + ret = wusbhc_b_create(wusbhc); + if (ret) { + dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret); + goto error_wusbhc_b_create; + } + + return 0; + +error_wusbhc_b_create: + usb_remove_hcd(usb_hcd); +error_usb_add_hcd: + wusbhc_destroy(wusbhc); +error_wusbhc_create: + uwb_rc_put(wusbhc->uwb_rc); +error: + whc_clean_up(whc); + if (usb_hcd) + usb_put_hcd(usb_hcd); + return ret; +} + + +static void whc_remove(struct umc_dev *umc) +{ + struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev); + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + + if (usb_hcd) { + wusbhc_b_destroy(wusbhc); + usb_remove_hcd(usb_hcd); + wusbhc_destroy(wusbhc); + uwb_rc_put(wusbhc->uwb_rc); + whc_clean_up(whc); + usb_put_hcd(usb_hcd); + } +} + +static struct umc_driver whci_hc_driver = { + .name = "whci-hcd", + .cap_id = UMC_CAP_ID_WHCI_WUSB_HC, + .probe = whc_probe, + .remove = whc_remove, +}; + +static int __init whci_hc_driver_init(void) +{ + return umc_driver_register(&whci_hc_driver); +} +module_init(whci_hc_driver_init); + +static void __exit whci_hc_driver_exit(void) +{ + umc_driver_unregister(&whci_hc_driver); +} +module_exit(whci_hc_driver_exit); + +/* PCI device ID's that we handle (so it gets loaded) */ +static struct pci_device_id whci_hcd_id_table[] = { + { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, + { /* empty last entry */ } +}; +MODULE_DEVICE_TABLE(pci, whci_hcd_id_table); + +MODULE_DESCRIPTION("WHCI Wireless USB host controller driver"); +MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c new file mode 100644 index 0000000..ac86e59 --- /dev/null +++ b/drivers/usb/host/whci/hw.c @@ -0,0 +1,87 @@ +/* + * Wireless Host Controller (WHC) hardware access helpers. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val) +{ + unsigned long flags; + u32 cmd; + + spin_lock_irqsave(&whc->lock, flags); + + cmd = le_readl(whc->base + WUSBCMD); + cmd = (cmd & ~mask) | val; + le_writel(cmd, whc->base + WUSBCMD); + + spin_unlock_irqrestore(&whc->lock, flags); +} + +/** + * whc_do_gencmd - start a generic command via the WUSBGENCMDSTS register + * @whc: the WHCI HC + * @cmd: command to start. + * @params: parameters for the command (the WUSBGENCMDPARAMS register value). + * @addr: pointer to any data for the command (may be NULL). + * @len: length of the data (if any). + */ +int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len) +{ + unsigned long flags; + dma_addr_t dma_addr; + int t; + + mutex_lock(&whc->mutex); + + /* Wait for previous command to complete. */ + t = wait_event_timeout(whc->cmd_wq, + (le_readl(whc->base + WUSBGENCMDSTS) & WUSBGENCMDSTS_ACTIVE) == 0, + WHC_GENCMD_TIMEOUT_MS); + if (t == 0) { + dev_err(&whc->umc->dev, "generic command timeout (%04x/%04x)\n", + le_readl(whc->base + WUSBGENCMDSTS), + le_readl(whc->base + WUSBGENCMDPARAMS)); + return -ETIMEDOUT; + } + + if (addr) { + memcpy(whc->gen_cmd_buf, addr, len); + dma_addr = whc->gen_cmd_buf_dma; + } else + dma_addr = 0; + + /* Poke registers to start cmd. */ + spin_lock_irqsave(&whc->lock, flags); + + le_writel(params, whc->base + WUSBGENCMDPARAMS); + le_writeq(dma_addr, whc->base + WUSBGENADDR); + + le_writel(WUSBGENCMDSTS_ACTIVE | WUSBGENCMDSTS_IOC | cmd, + whc->base + WUSBGENCMDSTS); + + spin_unlock_irqrestore(&whc->lock, flags); + + mutex_unlock(&whc->mutex); + + return 0; +} diff --git a/drivers/usb/host/whci/init.c b/drivers/usb/host/whci/init.c new file mode 100644 index 0000000..34a783c --- /dev/null +++ b/drivers/usb/host/whci/init.c @@ -0,0 +1,188 @@ +/* + * Wireless Host Controller (WHC) initialization. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +/* + * Reset the host controller. + */ +static void whc_hw_reset(struct whc *whc) +{ + le_writel(WUSBCMD_WHCRESET, whc->base + WUSBCMD); + whci_wait_for(&whc->umc->dev, whc->base + WUSBCMD, WUSBCMD_WHCRESET, 0, + 100, "reset"); +} + +static void whc_hw_init_di_buf(struct whc *whc) +{ + int d; + + /* Disable all entries in the Device Information buffer. */ + for (d = 0; d < whc->n_devices; d++) + whc->di_buf[d].addr_sec_info = WHC_DI_DISABLE; + + le_writeq(whc->di_buf_dma, whc->base + WUSBDEVICEINFOADDR); +} + +static void whc_hw_init_dn_buf(struct whc *whc) +{ + /* Clear the Device Notification buffer to ensure the V (valid) + * bits are clear. */ + memset(whc->dn_buf, 0, 4096); + + le_writeq(whc->dn_buf_dma, whc->base + WUSBDNTSBUFADDR); +} + +int whc_init(struct whc *whc) +{ + u32 whcsparams; + int ret, i; + resource_size_t start, len; + + spin_lock_init(&whc->lock); + mutex_init(&whc->mutex); + init_waitqueue_head(&whc->cmd_wq); + init_waitqueue_head(&whc->async_list_wq); + init_waitqueue_head(&whc->periodic_list_wq); + whc->workqueue = create_singlethread_workqueue(dev_name(&whc->umc->dev)); + if (whc->workqueue == NULL) { + ret = -ENOMEM; + goto error; + } + INIT_WORK(&whc->dn_work, whc_dn_work); + + INIT_WORK(&whc->async_work, scan_async_work); + INIT_LIST_HEAD(&whc->async_list); + INIT_LIST_HEAD(&whc->async_removed_list); + + INIT_WORK(&whc->periodic_work, scan_periodic_work); + for (i = 0; i < 5; i++) + INIT_LIST_HEAD(&whc->periodic_list[i]); + INIT_LIST_HEAD(&whc->periodic_removed_list); + + /* Map HC registers. */ + start = whc->umc->resource.start; + len = whc->umc->resource.end - start + 1; + if (!request_mem_region(start, len, "whci-hc")) { + dev_err(&whc->umc->dev, "can't request HC region\n"); + ret = -EBUSY; + goto error; + } + whc->base_phys = start; + whc->base = ioremap(start, len); + if (!whc->base) { + dev_err(&whc->umc->dev, "ioremap\n"); + ret = -ENOMEM; + goto error; + } + + whc_hw_reset(whc); + + /* Read maximum number of devices, keys and MMC IEs. */ + whcsparams = le_readl(whc->base + WHCSPARAMS); + whc->n_devices = WHCSPARAMS_TO_N_DEVICES(whcsparams); + whc->n_keys = WHCSPARAMS_TO_N_KEYS(whcsparams); + whc->n_mmc_ies = WHCSPARAMS_TO_N_MMC_IES(whcsparams); + + dev_dbg(&whc->umc->dev, "N_DEVICES = %d, N_KEYS = %d, N_MMC_IES = %d\n", + whc->n_devices, whc->n_keys, whc->n_mmc_ies); + + whc->qset_pool = dma_pool_create("qset", &whc->umc->dev, + sizeof(struct whc_qset), 64, 0); + if (whc->qset_pool == NULL) { + ret = -ENOMEM; + goto error; + } + + ret = asl_init(whc); + if (ret < 0) + goto error; + ret = pzl_init(whc); + if (ret < 0) + goto error; + + /* Allocate and initialize a buffer for generic commands, the + Device Information buffer, and the Device Notification + buffer. */ + + whc->gen_cmd_buf = dma_alloc_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, + &whc->gen_cmd_buf_dma, GFP_KERNEL); + if (whc->gen_cmd_buf == NULL) { + ret = -ENOMEM; + goto error; + } + + whc->dn_buf = dma_alloc_coherent(&whc->umc->dev, + sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, + &whc->dn_buf_dma, GFP_KERNEL); + if (!whc->dn_buf) { + ret = -ENOMEM; + goto error; + } + whc_hw_init_dn_buf(whc); + + whc->di_buf = dma_alloc_coherent(&whc->umc->dev, + sizeof(struct di_buf_entry) * whc->n_devices, + &whc->di_buf_dma, GFP_KERNEL); + if (!whc->di_buf) { + ret = -ENOMEM; + goto error; + } + whc_hw_init_di_buf(whc); + + return 0; + +error: + whc_clean_up(whc); + return ret; +} + +void whc_clean_up(struct whc *whc) +{ + resource_size_t len; + + if (whc->di_buf) + dma_free_coherent(&whc->umc->dev, sizeof(struct di_buf_entry) * whc->n_devices, + whc->di_buf, whc->di_buf_dma); + if (whc->dn_buf) + dma_free_coherent(&whc->umc->dev, sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, + whc->dn_buf, whc->dn_buf_dma); + if (whc->gen_cmd_buf) + dma_free_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, + whc->gen_cmd_buf, whc->gen_cmd_buf_dma); + + pzl_clean_up(whc); + asl_clean_up(whc); + + if (whc->qset_pool) + dma_pool_destroy(whc->qset_pool); + + len = whc->umc->resource.end - whc->umc->resource.start + 1; + if (whc->base) + iounmap(whc->base); + if (whc->base_phys) + release_mem_region(whc->base_phys, len); + + if (whc->workqueue) + destroy_workqueue(whc->workqueue); +} diff --git a/drivers/usb/host/whci/int.c b/drivers/usb/host/whci/int.c new file mode 100644 index 0000000..fce0117 --- /dev/null +++ b/drivers/usb/host/whci/int.c @@ -0,0 +1,95 @@ +/* + * Wireless Host Controller (WHC) interrupt handling. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +static void transfer_done(struct whc *whc) +{ + queue_work(whc->workqueue, &whc->async_work); + queue_work(whc->workqueue, &whc->periodic_work); +} + +irqreturn_t whc_int_handler(struct usb_hcd *hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 sts; + + sts = le_readl(whc->base + WUSBSTS); + if (!(sts & WUSBSTS_INT_MASK)) + return IRQ_NONE; + le_writel(sts & WUSBSTS_INT_MASK, whc->base + WUSBSTS); + + if (sts & WUSBSTS_GEN_CMD_DONE) + wake_up(&whc->cmd_wq); + + if (sts & WUSBSTS_HOST_ERR) + dev_err(&whc->umc->dev, "FIXME: host system error\n"); + + if (sts & WUSBSTS_ASYNC_SCHED_SYNCED) + wake_up(&whc->async_list_wq); + + if (sts & WUSBSTS_PERIODIC_SCHED_SYNCED) + wake_up(&whc->periodic_list_wq); + + if (sts & WUSBSTS_DNTS_INT) + queue_work(whc->workqueue, &whc->dn_work); + + /* + * A transfer completed (see [WHCI] section 4.7.1.2 for when + * this occurs). + */ + if (sts & (WUSBSTS_INT | WUSBSTS_ERR_INT)) + transfer_done(whc); + + return IRQ_HANDLED; +} + +static int process_dn_buf(struct whc *whc) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + struct dn_buf_entry *dn; + int processed = 0; + + for (dn = whc->dn_buf; dn < whc->dn_buf + WHC_N_DN_ENTRIES; dn++) { + if (dn->status & WHC_DN_STATUS_VALID) { + wusbhc_handle_dn(wusbhc, dn->src_addr, + (struct wusb_dn_hdr *)dn->dn_data, + dn->msg_size); + dn->status &= ~WHC_DN_STATUS_VALID; + processed++; + } + } + return processed; +} + +void whc_dn_work(struct work_struct *work) +{ + struct whc *whc = container_of(work, struct whc, dn_work); + int processed; + + do { + processed = process_dn_buf(whc); + } while (processed); +} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c new file mode 100644 index 0000000..8d62df0 --- /dev/null +++ b/drivers/usb/host/whci/pzl.c @@ -0,0 +1,398 @@ +/* + * Wireless Host Controller (WHC) periodic schedule management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> +#include <linux/usb.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +#if D_LOCAL >= 4 +static void dump_pzl(struct whc *whc, const char *tag) +{ + struct device *dev = &whc->umc->dev; + struct whc_qset *qset; + int period = 0; + + d_printf(4, dev, "PZL %s\n", tag); + + for (period = 0; period < 5; period++) { + d_printf(4, dev, "Period %d\n", period); + list_for_each_entry(qset, &whc->periodic_list[period], list_node) { + dump_qset(qset, dev); + } + } +} +#else +static inline void dump_pzl(struct whc *whc, const char *tag) +{ +} +#endif + +static void update_pzl_pointers(struct whc *whc, int period, u64 addr) +{ + switch (period) { + case 0: + whc_qset_set_link_ptr(&whc->pz_list[0], addr); + whc_qset_set_link_ptr(&whc->pz_list[2], addr); + whc_qset_set_link_ptr(&whc->pz_list[4], addr); + whc_qset_set_link_ptr(&whc->pz_list[6], addr); + whc_qset_set_link_ptr(&whc->pz_list[8], addr); + whc_qset_set_link_ptr(&whc->pz_list[10], addr); + whc_qset_set_link_ptr(&whc->pz_list[12], addr); + whc_qset_set_link_ptr(&whc->pz_list[14], addr); + break; + case 1: + whc_qset_set_link_ptr(&whc->pz_list[1], addr); + whc_qset_set_link_ptr(&whc->pz_list[5], addr); + whc_qset_set_link_ptr(&whc->pz_list[9], addr); + whc_qset_set_link_ptr(&whc->pz_list[13], addr); + break; + case 2: + whc_qset_set_link_ptr(&whc->pz_list[3], addr); + whc_qset_set_link_ptr(&whc->pz_list[11], addr); + break; + case 3: + whc_qset_set_link_ptr(&whc->pz_list[7], addr); + break; + case 4: + whc_qset_set_link_ptr(&whc->pz_list[15], addr); + break; + } +} + +/* + * Return the 'period' to use for this qset. The minimum interval for + * the endpoint is used so whatever urbs are submitted the device is + * polled often enough. + */ +static int qset_get_period(struct whc *whc, struct whc_qset *qset) +{ + uint8_t bInterval = qset->ep->desc.bInterval; + + if (bInterval < 6) + bInterval = 6; + if (bInterval > 10) + bInterval = 10; + return bInterval - 6; +} + +static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset) +{ + int period; + + period = qset_get_period(whc, qset); + + qset_clear(whc, qset); + list_move(&qset->list_node, &whc->periodic_list[period]); + qset->in_sw_list = true; +} + +static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset) +{ + list_move(&qset->list_node, &whc->periodic_removed_list); + qset->in_hw_list = false; + qset->in_sw_list = false; +} + +/** + * pzl_process_qset - process any recently inactivated or halted qTDs + * in a qset. + * + * After inactive qTDs are removed, new qTDs can be added if the + * urb queue still contains URBs. + * + * Returns the schedule updates required. + */ +static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) +{ + enum whc_update update = 0; + uint32_t status = 0; + + while (qset->ntds) { + struct whc_qtd *td; + int t; + + t = qset->td_start; + td = &qset->qtd[qset->td_start]; + status = le32_to_cpu(td->status); + + /* + * Nothing to do with a still active qTD. + */ + if (status & QTD_STS_ACTIVE) + break; + + if (status & QTD_STS_HALTED) { + /* Ug, an error. */ + process_halted_qtd(whc, qset, td); + goto done; + } + + /* Mmm, a completed qTD. */ + process_inactive_qtd(whc, qset, td); + } + + update |= qset_add_qtds(whc, qset); + +done: + /* + * If there are no qTDs in this qset, remove it from the PZL. + */ + if (qset->remove && qset->ntds == 0) { + pzl_qset_remove(whc, qset); + update |= WHC_UPDATE_REMOVED; + } + + return update; +} + +/** + * pzl_start - start the periodic schedule + * @whc: the WHCI host controller + * + * The PZL must be valid (e.g., all entries in the list should have + * the T bit set). + */ +void pzl_start(struct whc *whc) +{ + le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); + + whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED, + 1000, "start PZL"); +} + +/** + * pzl_stop - stop the periodic schedule + * @whc: the WHCI host controller + */ +void pzl_stop(struct whc *whc) +{ + whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_PERIODIC_SCHED, 0, + 1000, "stop PZL"); +} + +void pzl_update(struct whc *whc, uint32_t wusbcmd) +{ + whc_write_wusbcmd(whc, wusbcmd, wusbcmd); + wait_event(whc->periodic_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0); +} + +static void update_pzl_hw_view(struct whc *whc) +{ + struct whc_qset *qset, *t; + int period; + u64 tmp_qh = 0; + + for (period = 0; period < 5; period++) { + list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { + whc_qset_set_link_ptr(&qset->qh.link, tmp_qh); + tmp_qh = qset->qset_dma; + qset->in_hw_list = true; + } + update_pzl_pointers(whc, period, tmp_qh); + } +} + +/** + * scan_periodic_work - scan the PZL for qsets to process. + * + * Process each qset in the PZL in turn and then signal the WHC that + * the PZL has been updated. + * + * Then start, stop or update the periodic schedule as required. + */ +void scan_periodic_work(struct work_struct *work) +{ + struct whc *whc = container_of(work, struct whc, periodic_work); + struct whc_qset *qset, *t; + enum whc_update update = 0; + int period; + + spin_lock_irq(&whc->lock); + + dump_pzl(whc, "before processing"); + + for (period = 4; period >= 0; period--) { + list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { + if (!qset->in_hw_list) + update |= WHC_UPDATE_ADDED; + update |= pzl_process_qset(whc, qset); + } + } + + if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED)) + update_pzl_hw_view(whc); + + dump_pzl(whc, "after processing"); + + spin_unlock_irq(&whc->lock); + + if (update) { + uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB; + if (update & WHC_UPDATE_REMOVED) + wusbcmd |= WUSBCMD_PERIODIC_QSET_RM; + pzl_update(whc, wusbcmd); + } + + /* + * Now that the PZL is updated, complete the removal of any + * removed qsets. + */ + spin_lock(&whc->lock); + + list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { + qset_remove_complete(whc, qset); + } + + spin_unlock(&whc->lock); +} + +/** + * pzl_urb_enqueue - queue an URB onto the periodic list (PZL) + * @whc: the WHCI host controller + * @urb: the URB to enqueue + * @mem_flags: flags for any memory allocations + * + * The qset for the endpoint is obtained and the urb queued on to it. + * + * Work is scheduled to update the hardware's view of the PZL. + */ +int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) +{ + struct whc_qset *qset; + int err; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + qset = get_qset(whc, urb, GFP_ATOMIC); + if (qset == NULL) + err = -ENOMEM; + else + err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); + if (!err) { + usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (!qset->in_sw_list) + qset_insert_in_sw_list(whc, qset); + } + + spin_unlock_irqrestore(&whc->lock, flags); + + if (!err) + queue_work(whc->workqueue, &whc->periodic_work); + + return 0; +} + +/** + * pzl_urb_dequeue - remove an URB (qset) from the periodic list + * @whc: the WHCI host controller + * @urb: the URB to dequeue + * @status: the current status of the URB + * + * URBs that do yet have qTDs can simply be removed from the software + * queue, otherwise the qset must be removed so the qTDs can be safely + * removed. + */ +int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status) +{ + struct whc_urb *wurb = urb->hcpriv; + struct whc_qset *qset = wurb->qset; + struct whc_std *std, *t; + int ret; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); + if (ret < 0) + goto out; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb == urb) + qset_free_std(whc, std); + else + std->qtd = NULL; /* so this std is re-added when the qset is */ + } + + pzl_qset_remove(whc, qset); + wurb->status = status; + wurb->is_async = false; + queue_work(whc->workqueue, &wurb->dequeue_work); + +out: + spin_unlock_irqrestore(&whc->lock, flags); + + return ret; +} + +/** + * pzl_qset_delete - delete a qset from the PZL + */ +void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) +{ + qset->remove = 1; + queue_work(whc->workqueue, &whc->periodic_work); + qset_delete(whc, qset); +} + + +/** + * pzl_init - initialize the periodic zone list + * @whc: the WHCI host controller + */ +int pzl_init(struct whc *whc) +{ + int i; + + whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16, + &whc->pz_list_dma, GFP_KERNEL); + if (whc->pz_list == NULL) + return -ENOMEM; + + /* Set T bit on all elements in PZL. */ + for (i = 0; i < 16; i++) + whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); + + le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); + + return 0; +} + +/** + * pzl_clean_up - free PZL resources + * @whc: the WHCI host controller + * + * The PZL is stopped and empty. + */ +void pzl_clean_up(struct whc *whc) +{ + if (whc->pz_list) + dma_free_coherent(&whc->umc->dev, sizeof(u64) * 16, whc->pz_list, + whc->pz_list_dma); +} diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c new file mode 100644 index 0000000..0420037 --- /dev/null +++ b/drivers/usb/host/whci/qset.c @@ -0,0 +1,567 @@ +/* + * Wireless Host Controller (WHC) qset management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> +#include <linux/usb.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +void dump_qset(struct whc_qset *qset, struct device *dev) +{ + struct whc_std *std; + struct urb *urb = NULL; + int i; + + dev_dbg(dev, "qset %08x\n", (u32)qset->qset_dma); + dev_dbg(dev, " -> %08x\n", (u32)qset->qh.link); + dev_dbg(dev, " info: %08x %08x %08x\n", + qset->qh.info1, qset->qh.info2, qset->qh.info3); + dev_dbg(dev, " sts: %04x errs: %d\n", qset->qh.status, qset->qh.err_count); + dev_dbg(dev, " TD: sts: %08x opts: %08x\n", + qset->qh.overlay.qtd.status, qset->qh.overlay.qtd.options); + + for (i = 0; i < WHCI_QSET_TD_MAX; i++) { + dev_dbg(dev, " %c%c TD[%d]: sts: %08x opts: %08x ptr: %08x\n", + i == qset->td_start ? 'S' : ' ', + i == qset->td_end ? 'E' : ' ', + i, qset->qtd[i].status, qset->qtd[i].options, + (u32)qset->qtd[i].page_list_ptr); + } + dev_dbg(dev, " ntds: %d\n", qset->ntds); + list_for_each_entry(std, &qset->stds, list_node) { + if (urb != std->urb) { + urb = std->urb; + dev_dbg(dev, " urb %p transferred: %d bytes\n", urb, + urb->actual_length); + } + if (std->qtd) + dev_dbg(dev, " sTD[%td]: %zu bytes @ %08x\n", + std->qtd - &qset->qtd[0], + std->len, std->num_pointers ? + (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); + else + dev_dbg(dev, " sTD[-]: %zd bytes @ %08x\n", + std->len, std->num_pointers ? + (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); + } +} + +struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags) +{ + struct whc_qset *qset; + dma_addr_t dma; + + qset = dma_pool_alloc(whc->qset_pool, mem_flags, &dma); + if (qset == NULL) + return NULL; + memset(qset, 0, sizeof(struct whc_qset)); + + qset->qset_dma = dma; + qset->whc = whc; + + INIT_LIST_HEAD(&qset->list_node); + INIT_LIST_HEAD(&qset->stds); + + return qset; +} + +/** + * qset_fill_qh - fill the static endpoint state in a qset's QHead + * @qset: the qset whose QH needs initializing with static endpoint + * state + * @urb: an urb for a transfer to this endpoint + */ +static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) +{ + struct usb_device *usb_dev = urb->dev; + struct usb_wireless_ep_comp_descriptor *epcd; + bool is_out; + + is_out = usb_pipeout(urb->pipe); + + epcd = (struct usb_wireless_ep_comp_descriptor *)qset->ep->extra; + + if (epcd) { + qset->max_seq = epcd->bMaxSequence; + qset->max_burst = epcd->bMaxBurst; + } else { + qset->max_seq = 2; + qset->max_burst = 1; + } + + qset->qh.info1 = cpu_to_le32( + QH_INFO1_EP(usb_pipeendpoint(urb->pipe)) + | (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN) + | usb_pipe_to_qh_type(urb->pipe) + | QH_INFO1_DEV_INFO_IDX(wusb_port_no_to_idx(usb_dev->portnum)) + | QH_INFO1_MAX_PKT_LEN(usb_maxpacket(urb->dev, urb->pipe, is_out)) + ); + qset->qh.info2 = cpu_to_le32( + QH_INFO2_BURST(qset->max_burst) + | QH_INFO2_DBP(0) + | QH_INFO2_MAX_COUNT(3) + | QH_INFO2_MAX_RETRY(3) + | QH_INFO2_MAX_SEQ(qset->max_seq - 1) + ); + /* FIXME: where can we obtain these Tx parameters from? Why + * doesn't the chip know what Tx power to use? It knows the Rx + * strength and can presumably guess the Tx power required + * from that? */ + qset->qh.info3 = cpu_to_le32( + QH_INFO3_TX_RATE_53_3 + | QH_INFO3_TX_PWR(0) /* 0 == max power */ + ); +} + +/** + * qset_clear - clear fields in a qset so it may be reinserted into a + * schedule + */ +void qset_clear(struct whc *whc, struct whc_qset *qset) +{ + qset->td_start = qset->td_end = qset->ntds = 0; + qset->remove = 0; + + qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); + qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start)); + qset->qh.err_count = 0; + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); + qset->qh.scratch[0] = 0; + qset->qh.scratch[1] = 0; + qset->qh.scratch[2] = 0; + + memset(&qset->qh.overlay, 0, sizeof(qset->qh.overlay)); + + init_completion(&qset->remove_complete); +} + +/** + * get_qset - get the qset for an async endpoint + * + * A new qset is created if one does not already exist. + */ +struct whc_qset *get_qset(struct whc *whc, struct urb *urb, + gfp_t mem_flags) +{ + struct whc_qset *qset; + + qset = urb->ep->hcpriv; + if (qset == NULL) { + qset = qset_alloc(whc, mem_flags); + if (qset == NULL) + return NULL; + + qset->ep = urb->ep; + urb->ep->hcpriv = qset; + qset_fill_qh(qset, urb); + } + return qset; +} + +void qset_remove_complete(struct whc *whc, struct whc_qset *qset) +{ + list_del_init(&qset->list_node); + complete(&qset->remove_complete); +} + +/** + * qset_add_qtds - add qTDs for an URB to a qset + * + * Returns true if the list (ASL/PZL) must be updated because (for a + * WHCI 0.95 controller) an activated qTD was pointed to be iCur. + */ +enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset) +{ + struct whc_std *std; + enum whc_update update = 0; + + list_for_each_entry(std, &qset->stds, list_node) { + struct whc_qtd *qtd; + uint32_t status; + + if (qset->ntds >= WHCI_QSET_TD_MAX + || (qset->pause_after_urb && std->urb != qset->pause_after_urb)) + break; + + if (std->qtd) + continue; /* already has a qTD */ + + qtd = std->qtd = &qset->qtd[qset->td_end]; + + /* Fill in setup bytes for control transfers. */ + if (usb_pipecontrol(std->urb->pipe)) + memcpy(qtd->setup, std->urb->setup_packet, 8); + + status = QTD_STS_ACTIVE | QTD_STS_LEN(std->len); + + if (whc_std_last(std) && usb_pipeout(std->urb->pipe)) + status |= QTD_STS_LAST_PKT; + + /* + * For an IN transfer the iAlt field should be set so + * the h/w will automatically advance to the next + * transfer. However, if there are 8 or more TDs + * remaining in this transfer then iAlt cannot be set + * as it could point to somewhere in this transfer. + */ + if (std->ntds_remaining < WHCI_QSET_TD_MAX) { + int ialt; + ialt = (qset->td_end + std->ntds_remaining) % WHCI_QSET_TD_MAX; + status |= QTD_STS_IALT(ialt); + } else if (usb_pipein(std->urb->pipe)) + qset->pause_after_urb = std->urb; + + if (std->num_pointers) + qtd->options = cpu_to_le32(QTD_OPT_IOC); + else + qtd->options = cpu_to_le32(QTD_OPT_IOC | QTD_OPT_SMALL); + qtd->page_list_ptr = cpu_to_le64(std->dma_addr); + + qtd->status = cpu_to_le32(status); + + if (QH_STATUS_TO_ICUR(qset->qh.status) == qset->td_end) + update = WHC_UPDATE_UPDATED; + + if (++qset->td_end >= WHCI_QSET_TD_MAX) + qset->td_end = 0; + qset->ntds++; + } + + return update; +} + +/** + * qset_remove_qtd - remove the first qTD from a qset. + * + * The qTD might be still active (if it's part of a IN URB that + * resulted in a short read) so ensure it's deactivated. + */ +static void qset_remove_qtd(struct whc *whc, struct whc_qset *qset) +{ + qset->qtd[qset->td_start].status = 0; + + if (++qset->td_start >= WHCI_QSET_TD_MAX) + qset->td_start = 0; + qset->ntds--; +} + +/** + * qset_free_std - remove an sTD and free it. + * @whc: the WHCI host controller + * @std: the sTD to remove and free. + */ +void qset_free_std(struct whc *whc, struct whc_std *std) +{ + list_del(&std->list_node); + if (std->num_pointers) { + dma_unmap_single(whc->wusbhc.dev, std->dma_addr, + std->num_pointers * sizeof(struct whc_page_list_entry), + DMA_TO_DEVICE); + kfree(std->pl_virt); + } + + kfree(std); +} + +/** + * qset_remove_qtds - remove an URB's qTDs (and sTDs). + */ +static void qset_remove_qtds(struct whc *whc, struct whc_qset *qset, + struct urb *urb) +{ + struct whc_std *std, *t; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb != urb) + break; + if (std->qtd != NULL) + qset_remove_qtd(whc, qset); + qset_free_std(whc, std); + } +} + +/** + * qset_free_stds - free any remaining sTDs for an URB. + */ +static void qset_free_stds(struct whc_qset *qset, struct urb *urb) +{ + struct whc_std *std, *t; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb == urb) + qset_free_std(qset->whc, std); + } +} + +static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_flags) +{ + dma_addr_t dma_addr = std->dma_addr; + dma_addr_t sp, ep; + size_t std_len = std->len; + size_t pl_len; + int p; + + sp = ALIGN(dma_addr, WHCI_PAGE_SIZE); + ep = dma_addr + std_len; + std->num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE); + + pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); + std->pl_virt = kmalloc(pl_len, mem_flags); + if (std->pl_virt == NULL) + return -ENOMEM; + std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE); + + for (p = 0; p < std->num_pointers; p++) { + std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); + dma_addr = ALIGN(dma_addr + WHCI_PAGE_SIZE, WHCI_PAGE_SIZE); + } + + return 0; +} + +/** + * urb_dequeue_work - executes asl/pzl update and gives back the urb to the system. + */ +static void urb_dequeue_work(struct work_struct *work) +{ + struct whc_urb *wurb = container_of(work, struct whc_urb, dequeue_work); + struct whc_qset *qset = wurb->qset; + struct whc *whc = qset->whc; + unsigned long flags; + + if (wurb->is_async == true) + asl_update(whc, WUSBCMD_ASYNC_UPDATED + | WUSBCMD_ASYNC_SYNCED_DB + | WUSBCMD_ASYNC_QSET_RM); + else + pzl_update(whc, WUSBCMD_PERIODIC_UPDATED + | WUSBCMD_PERIODIC_SYNCED_DB + | WUSBCMD_PERIODIC_QSET_RM); + + spin_lock_irqsave(&whc->lock, flags); + qset_remove_urb(whc, qset, wurb->urb, wurb->status); + spin_unlock_irqrestore(&whc->lock, flags); +} + +/** + * qset_add_urb - add an urb to the qset's queue. + * + * The URB is chopped into sTDs, one for each qTD that will required. + * At least one qTD (and sTD) is required even if the transfer has no + * data (e.g., for some control transfers). + */ +int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, + gfp_t mem_flags) +{ + struct whc_urb *wurb; + int remaining = urb->transfer_buffer_length; + u64 transfer_dma = urb->transfer_dma; + int ntds_remaining; + + ntds_remaining = DIV_ROUND_UP(remaining, QTD_MAX_XFER_SIZE); + if (ntds_remaining == 0) + ntds_remaining = 1; + + wurb = kzalloc(sizeof(struct whc_urb), mem_flags); + if (wurb == NULL) + goto err_no_mem; + urb->hcpriv = wurb; + wurb->qset = qset; + wurb->urb = urb; + INIT_WORK(&wurb->dequeue_work, urb_dequeue_work); + + while (ntds_remaining) { + struct whc_std *std; + size_t std_len; + + std = kmalloc(sizeof(struct whc_std), mem_flags); + if (std == NULL) + goto err_no_mem; + + std_len = remaining; + if (std_len > QTD_MAX_XFER_SIZE) + std_len = QTD_MAX_XFER_SIZE; + + std->urb = urb; + std->dma_addr = transfer_dma; + std->len = std_len; + std->ntds_remaining = ntds_remaining; + std->qtd = NULL; + + INIT_LIST_HEAD(&std->list_node); + list_add_tail(&std->list_node, &qset->stds); + + if (std_len > WHCI_PAGE_SIZE) { + if (qset_fill_page_list(whc, std, mem_flags) < 0) + goto err_no_mem; + } else + std->num_pointers = 0; + + ntds_remaining--; + remaining -= std_len; + transfer_dma += std_len; + } + + return 0; + +err_no_mem: + qset_free_stds(qset, urb); + return -ENOMEM; +} + +/** + * qset_remove_urb - remove an URB from the urb queue. + * + * The URB is returned to the USB subsystem. + */ +void qset_remove_urb(struct whc *whc, struct whc_qset *qset, + struct urb *urb, int status) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + struct whc_urb *wurb = urb->hcpriv; + + usb_hcd_unlink_urb_from_ep(&wusbhc->usb_hcd, urb); + /* Drop the lock as urb->complete() may enqueue another urb. */ + spin_unlock(&whc->lock); + wusbhc_giveback_urb(wusbhc, urb, status); + spin_lock(&whc->lock); + + kfree(wurb); +} + +/** + * get_urb_status_from_qtd - get the completed urb status from qTD status + * @urb: completed urb + * @status: qTD status + */ +static int get_urb_status_from_qtd(struct urb *urb, u32 status) +{ + if (status & QTD_STS_HALTED) { + if (status & QTD_STS_DBE) + return usb_pipein(urb->pipe) ? -ENOSR : -ECOMM; + else if (status & QTD_STS_BABBLE) + return -EOVERFLOW; + else if (status & QTD_STS_RCE) + return -ETIME; + return -EPIPE; + } + if (usb_pipein(urb->pipe) + && (urb->transfer_flags & URB_SHORT_NOT_OK) + && urb->actual_length < urb->transfer_buffer_length) + return -EREMOTEIO; + return 0; +} + +/** + * process_inactive_qtd - process an inactive (but not halted) qTD. + * + * Update the urb with the transfer bytes from the qTD, if the urb is + * completely transfered or (in the case of an IN only) the LPF is + * set, then the transfer is complete and the urb should be returned + * to the system. + */ +void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd) +{ + struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); + struct urb *urb = std->urb; + uint32_t status; + bool complete; + + status = le32_to_cpu(qtd->status); + + urb->actual_length += std->len - QTD_STS_TO_LEN(status); + + if (usb_pipein(urb->pipe) && (status & QTD_STS_LAST_PKT)) + complete = true; + else + complete = whc_std_last(std); + + qset_remove_qtd(whc, qset); + qset_free_std(whc, std); + + /* + * Transfers for this URB are complete? Then return it to the + * USB subsystem. + */ + if (complete) { + qset_remove_qtds(whc, qset, urb); + qset_remove_urb(whc, qset, urb, get_urb_status_from_qtd(urb, status)); + + /* + * If iAlt isn't valid then the hardware didn't + * advance iCur. Adjust the start and end pointers to + * match iCur. + */ + if (!(status & QTD_STS_IALT_VALID)) + qset->td_start = qset->td_end + = QH_STATUS_TO_ICUR(le16_to_cpu(qset->qh.status)); + qset->pause_after_urb = NULL; + } +} + +/** + * process_halted_qtd - process a qset with a halted qtd + * + * Remove all the qTDs for the failed URB and return the failed URB to + * the USB subsystem. Then remove all other qTDs so the qset can be + * removed. + * + * FIXME: this is the point where rate adaptation can be done. If a + * transfer failed because it exceeded the maximum number of retries + * then it could be reactivated with a slower rate without having to + * remove the qset. + */ +void process_halted_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd) +{ + struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); + struct urb *urb = std->urb; + int urb_status; + + urb_status = get_urb_status_from_qtd(urb, le32_to_cpu(qtd->status)); + + qset_remove_qtds(whc, qset, urb); + qset_remove_urb(whc, qset, urb, urb_status); + + list_for_each_entry(std, &qset->stds, list_node) { + if (qset->ntds == 0) + break; + qset_remove_qtd(whc, qset); + std->qtd = NULL; + } + + qset->remove = 1; +} + +void qset_free(struct whc *whc, struct whc_qset *qset) +{ + dma_pool_free(whc->qset_pool, qset, qset->qset_dma); +} + +/** + * qset_delete - wait for a qset to be unused, then free it. + */ +void qset_delete(struct whc *whc, struct whc_qset *qset) +{ + wait_for_completion(&qset->remove_complete); + qset_free(whc, qset); +} diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h new file mode 100644 index 0000000..1d2a53b --- /dev/null +++ b/drivers/usb/host/whci/whcd.h @@ -0,0 +1,197 @@ +/* + * Wireless Host Controller (WHC) private header. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef __WHCD_H +#define __WHCD_H + +#include <linux/uwb/whci.h> +#include <linux/workqueue.h> + +#include "whci-hc.h" + +/* Generic command timeout. */ +#define WHC_GENCMD_TIMEOUT_MS 100 + + +struct whc { + struct wusbhc wusbhc; + struct umc_dev *umc; + + resource_size_t base_phys; + void __iomem *base; + int irq; + + u8 n_devices; + u8 n_keys; + u8 n_mmc_ies; + + u64 *pz_list; + struct dn_buf_entry *dn_buf; + struct di_buf_entry *di_buf; + dma_addr_t pz_list_dma; + dma_addr_t dn_buf_dma; + dma_addr_t di_buf_dma; + + spinlock_t lock; + struct mutex mutex; + + void * gen_cmd_buf; + dma_addr_t gen_cmd_buf_dma; + wait_queue_head_t cmd_wq; + + struct workqueue_struct *workqueue; + struct work_struct dn_work; + + struct dma_pool *qset_pool; + + struct list_head async_list; + struct list_head async_removed_list; + wait_queue_head_t async_list_wq; + struct work_struct async_work; + + struct list_head periodic_list[5]; + struct list_head periodic_removed_list; + wait_queue_head_t periodic_list_wq; + struct work_struct periodic_work; +}; + +#define wusbhc_to_whc(w) (container_of((w), struct whc, wusbhc)) + +/** + * struct whc_std - a software TD. + * @urb: the URB this sTD is for. + * @offset: start of the URB's data for this TD. + * @len: the length of data in the associated TD. + * @ntds_remaining: number of TDs (starting from this one) in this transfer. + * + * Queued URBs may require more TDs than are available in a qset so we + * use a list of these "software TDs" (sTDs) to hold per-TD data. + */ +struct whc_std { + struct urb *urb; + size_t len; + int ntds_remaining; + struct whc_qtd *qtd; + + struct list_head list_node; + int num_pointers; + dma_addr_t dma_addr; + struct whc_page_list_entry *pl_virt; +}; + +/** + * struct whc_urb - per URB host controller structure. + * @urb: the URB this struct is for. + * @qset: the qset associated to the URB. + * @dequeue_work: the work to remove the URB when dequeued. + * @is_async: the URB belongs to async sheduler or not. + * @status: the status to be returned when calling wusbhc_giveback_urb. + */ +struct whc_urb { + struct urb *urb; + struct whc_qset *qset; + struct work_struct dequeue_work; + bool is_async; + int status; +}; + +/** + * whc_std_last - is this sTD the URB's last? + * @std: the sTD to check. + */ +static inline bool whc_std_last(struct whc_std *std) +{ + return std->ntds_remaining <= 1; +} + +enum whc_update { + WHC_UPDATE_ADDED = 0x01, + WHC_UPDATE_REMOVED = 0x02, + WHC_UPDATE_UPDATED = 0x04, +}; + +/* init.c */ +int whc_init(struct whc *whc); +void whc_clean_up(struct whc *whc); + +/* hw.c */ +void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); +int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); + +/* wusb.c */ +int whc_wusbhc_start(struct wusbhc *wusbhc); +void whc_wusbhc_stop(struct wusbhc *wusbhc); +int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + u8 handle, struct wuie_hdr *wuie); +int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle); +int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm); +int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev); +int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots); +int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *ptk, size_t key_size); +int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, + const void *gtk, size_t key_size); +int whc_set_cluster_id(struct whc *whc, u8 bcid); + +/* int.c */ +irqreturn_t whc_int_handler(struct usb_hcd *hcd); +void whc_dn_work(struct work_struct *work); + +/* asl.c */ +void asl_start(struct whc *whc); +void asl_stop(struct whc *whc); +int asl_init(struct whc *whc); +void asl_clean_up(struct whc *whc); +int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); +int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status); +void asl_qset_delete(struct whc *whc, struct whc_qset *qset); +void scan_async_work(struct work_struct *work); + +/* pzl.c */ +int pzl_init(struct whc *whc); +void pzl_clean_up(struct whc *whc); +void pzl_start(struct whc *whc); +void pzl_stop(struct whc *whc); +int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); +int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status); +void pzl_qset_delete(struct whc *whc, struct whc_qset *qset); +void scan_periodic_work(struct work_struct *work); + +/* qset.c */ +struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags); +void qset_free(struct whc *whc, struct whc_qset *qset); +struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags); +void qset_delete(struct whc *whc, struct whc_qset *qset); +void qset_clear(struct whc *whc, struct whc_qset *qset); +int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, + gfp_t mem_flags); +void qset_free_std(struct whc *whc, struct whc_std *std); +void qset_remove_urb(struct whc *whc, struct whc_qset *qset, + struct urb *urb, int status); +void process_halted_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd); +void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd); +enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset); +void qset_remove_complete(struct whc *whc, struct whc_qset *qset); +void dump_qset(struct whc_qset *qset, struct device *dev); +void pzl_update(struct whc *whc, uint32_t wusbcmd); +void asl_update(struct whc *whc, uint32_t wusbcmd); + +#endif /* #ifndef __WHCD_H */ diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h new file mode 100644 index 0000000..bff1eb7 --- /dev/null +++ b/drivers/usb/host/whci/whci-hc.h @@ -0,0 +1,416 @@ +/* + * Wireless Host Controller (WHC) data structures. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef _WHCI_WHCI_HC_H +#define _WHCI_WHCI_HC_H + +#include <linux/list.h> + +/** + * WHCI_PAGE_SIZE - page size use by WHCI + * + * WHCI assumes that host system uses pages of 4096 octets. + */ +#define WHCI_PAGE_SIZE 4096 + + +/** + * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single + * qtd. + * + * This is 2^20 - 1. + */ +#define QTD_MAX_XFER_SIZE 1048575 + + +/** + * struct whc_qtd - Queue Element Transfer Descriptors (qTD) + * + * This describes the data for a bulk, control or interrupt transfer. + * + * [WHCI] section 3.2.4 + */ +struct whc_qtd { + __le32 status; /*< remaining transfer len and transfer status */ + __le32 options; + __le64 page_list_ptr; /*< physical pointer to data buffer page list*/ + __u8 setup[8]; /*< setup data for control transfers */ +} __attribute__((packed)); + +#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */ +#define QTD_STS_HALTED (1 << 30) /* transfer halted */ +#define QTD_STS_DBE (1 << 29) /* data buffer error */ +#define QTD_STS_BABBLE (1 << 28) /* babble detected */ +#define QTD_STS_RCE (1 << 27) /* retry count exceeded */ +#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */ +#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */ +#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */ +#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */ +#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */ +#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff) + +#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */ +#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */ + +/** + * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD) + * + * This describes the data and other parameters for an isochronous + * transfer. + * + * [WHCI] section 3.2.5 + */ +struct whc_itd { + __le16 presentation_time; /*< presentation time for OUT transfers */ + __u8 num_segments; /*< number of data segments in segment list */ + __u8 status; /*< command execution status */ + __le32 options; /*< misc transfer options */ + __le64 page_list_ptr; /*< physical pointer to data buffer page list */ + __le64 seg_list_ptr; /*< physical pointer to segment list */ +} __attribute__((packed)); + +#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */ +#define ITD_STS_DBE (1 << 5) /* data buffer error */ +#define ITD_STS_BABBLE (1 << 4) /* babble detected */ +#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */ + +#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */ +#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */ + +/** + * Page list entry. + * + * A TD's page list must contain sufficient page list entries for the + * total data length in the TD. + * + * [WHCI] section 3.2.4.3 + */ +struct whc_page_list_entry { + __le64 buf_ptr; /*< physical pointer to buffer */ +} __attribute__((packed)); + +/** + * struct whc_seg_list_entry - Segment list entry. + * + * Describes a portion of the data buffer described in the containing + * qTD's page list. + * + * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr + * + qtd->seg_list_ptr[seg].offset; + * + * Segments can't cross page boundries. + * + * [WHCI] section 3.2.5.5 + */ +struct whc_seg_list_entry { + __le16 len; /*< segment length */ + __u8 idx; /*< index into page list */ + __u8 status; /*< segment status */ + __le16 offset; /*< 12 bit offset into page */ +} __attribute__((packed)); + +/** + * struct whc_qhead - endpoint and status information for a qset. + * + * [WHCI] section 3.2.6 + */ +struct whc_qhead { + __le64 link; /*< next qset in list */ + __le32 info1; + __le32 info2; + __le32 info3; + __le16 status; + __le16 err_count; /*< transaction error count */ + __le32 cur_window; + __le32 scratch[3]; /*< h/w scratch area */ + union { + struct whc_qtd qtd; + struct whc_itd itd; + } overlay; +} __attribute__((packed)); + +#define QH_LINK_PTR_MASK (~0x03Full) +#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK) +#define QH_LINK_IQS (1 << 4) /* isochronous queue set */ +#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */ +#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */ + +#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */ +#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */ +#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */ +#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */ +#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */ +#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */ +#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */ +#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */ +#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */ +#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */ +#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */ + +#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */ +#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */ +#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */ +#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */ +#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */ +#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */ +#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */ +#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */ + +#define QH_INFO3_TX_RATE_53_3 (0 << 24) +#define QH_INFO3_TX_RATE_80 (1 << 24) +#define QH_INFO3_TX_RATE_106_7 (2 << 24) +#define QH_INFO3_TX_RATE_160 (3 << 24) +#define QH_INFO3_TX_RATE_200 (4 << 24) +#define QH_INFO3_TX_RATE_320 (5 << 24) +#define QH_INFO3_TX_RATE_400 (6 << 24) +#define QH_INFO3_TX_RATE_480 (7 << 24) +#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */ + +#define QH_STATUS_FLOW_CTRL (1 << 15) +#define QH_STATUS_ICUR(i) ((i) << 5) +#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) + +/** + * usb_pipe_to_qh_type - USB core pipe type to QH transfer type + * + * Returns the QH type field for a USB core pipe type. + */ +static inline unsigned usb_pipe_to_qh_type(unsigned pipe) +{ + static const unsigned type[] = { + [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC, + [PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT, + [PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL, + [PIPE_BULK] = QH_INFO1_TR_TYPE_BULK, + }; + return type[usb_pipetype(pipe)]; +} + +/** + * Maxiumum number of TDs in a qset. + */ +#define WHCI_QSET_TD_MAX 8 + +/** + * struct whc_qset - WUSB data transfers to a specific endpoint + * @qh: the QHead of this qset + * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt + * transfers) + * @itd: up to 8 iTDs (for qsets for isochronous transfers) + * @qset_dma: DMA address for this qset + * @whc: WHCI HC this qset is for + * @ep: endpoint + * @stds: list of sTDs queued to this qset + * @ntds: number of qTDs queued (not necessarily the same as nTDs + * field in the QH) + * @td_start: index of the first qTD in the list + * @td_end: index of next free qTD in the list (provided + * ntds < WHCI_QSET_TD_MAX) + * + * Queue Sets (qsets) are added to the asynchronous schedule list + * (ASL) or the periodic zone list (PZL). + * + * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate). + * Each TD may refer to at most 1 MiB of data. If a single transfer + * has > 8MiB of data, TDs can be reused as they are completed since + * the TD list is used as a circular buffer. Similarly, several + * (smaller) transfers may be queued in a qset. + * + * WHCI controllers may cache portions of the qsets in the ASL and + * PZL, requiring the WHCD to inform the WHC that the lists have been + * updated (fields changed or qsets inserted or removed). For safe + * insertion and removal of qsets from the lists the schedule must be + * stopped to avoid races in updating the QH link pointers. + * + * Since the HC is free to execute qsets in any order, all transfers + * to an endpoint should use the same qset to ensure transfers are + * executed in the order they're submitted. + * + * [WHCI] section 3.2.3 + */ +struct whc_qset { + struct whc_qhead qh; + union { + struct whc_qtd qtd[WHCI_QSET_TD_MAX]; + struct whc_itd itd[WHCI_QSET_TD_MAX]; + }; + + /* private data for WHCD */ + dma_addr_t qset_dma; + struct whc *whc; + struct usb_host_endpoint *ep; + struct list_head stds; + int ntds; + int td_start; + int td_end; + struct list_head list_node; + unsigned in_sw_list:1; + unsigned in_hw_list:1; + unsigned remove:1; + struct urb *pause_after_urb; + struct completion remove_complete; + int max_burst; + int max_seq; +}; + +static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target) +{ + if (target) + *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target); + else + *ptr = QH_LINK_T; +} + +/** + * struct di_buf_entry - Device Information (DI) buffer entry. + * + * There's one of these per connected device. + */ +struct di_buf_entry { + __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */ + __le32 addr_sec_info; /*< addressing and security info */ + __le32 reserved[7]; +} __attribute__((packed)); + +#define WHC_DI_SECURE (1 << 31) +#define WHC_DI_DISABLE (1 << 30) +#define WHC_DI_KEY_IDX(k) ((k) << 8) +#define WHC_DI_KEY_IDX_MASK 0x0000ff00 +#define WHC_DI_DEV_ADDR(a) ((a) << 0) +#define WHC_DI_DEV_ADDR_MASK 0x000000ff + +/** + * struct dn_buf_entry - Device Notification (DN) buffer entry. + * + * [WHCI] section 3.2.8 + */ +struct dn_buf_entry { + __u8 msg_size; /*< number of octets of valid DN data */ + __u8 reserved1; + __u8 src_addr; /*< source address */ + __u8 status; /*< buffer entry status */ + __le32 tkid; /*< TKID for source device, valid if secure bit is set */ + __u8 dn_data[56]; /*< up to 56 octets of DN data */ +} __attribute__((packed)); + +#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */ +#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */ + +#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry)) + +/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of + data. [WHCI] section 2.4.7. */ +#define WHC_GEN_CMD_DATA_LEN 256 + +/* + * HC registers. + * + * [WHCI] section 2.4 + */ + +#define WHCIVERSION 0x00 + +#define WHCSPARAMS 0x04 +# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff) +# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff) +# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f) + +#define WUSBCMD 0x08 +# define WUSBCMD_BCID(b) ((b) << 16) +# define WUSBCMD_BCID_MASK (0xff << 16) +# define WUSBCMD_ASYNC_QSET_RM (1 << 12) +# define WUSBCMD_PERIODIC_QSET_RM (1 << 11) +# define WUSBCMD_WUSBSI(s) ((s) << 8) +# define WUSBCMD_WUSBSI_MASK (0x7 << 8) +# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7) +# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6) +# define WUSBCMD_ASYNC_UPDATED (1 << 5) +# define WUSBCMD_PERIODIC_UPDATED (1 << 4) +# define WUSBCMD_ASYNC_EN (1 << 3) +# define WUSBCMD_PERIODIC_EN (1 << 2) +# define WUSBCMD_WHCRESET (1 << 1) +# define WUSBCMD_RUN (1 << 0) + +#define WUSBSTS 0x0c +# define WUSBSTS_ASYNC_SCHED (1 << 15) +# define WUSBSTS_PERIODIC_SCHED (1 << 14) +# define WUSBSTS_DNTS_SCHED (1 << 13) +# define WUSBSTS_HCHALTED (1 << 12) +# define WUSBSTS_GEN_CMD_DONE (1 << 9) +# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8) +# define WUSBSTS_DNTS_OVERFLOW (1 << 7) +# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6) +# define WUSBSTS_HOST_ERR (1 << 5) +# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4) +# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3) +# define WUSBSTS_DNTS_INT (1 << 2) +# define WUSBSTS_ERR_INT (1 << 1) +# define WUSBSTS_INT (1 << 0) +# define WUSBSTS_INT_MASK 0x3ff + +#define WUSBINTR 0x10 +# define WUSBINTR_GEN_CMD_DONE (1 << 9) +# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8) +# define WUSBINTR_DNTS_OVERFLOW (1 << 7) +# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6) +# define WUSBINTR_HOST_ERR (1 << 5) +# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4) +# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3) +# define WUSBINTR_DNTS_INT (1 << 2) +# define WUSBINTR_ERR_INT (1 << 1) +# define WUSBINTR_INT (1 << 0) +# define WUSBINTR_ALL 0x3ff + +#define WUSBGENCMDSTS 0x14 +# define WUSBGENCMDSTS_ACTIVE (1 << 31) +# define WUSBGENCMDSTS_ERROR (1 << 24) +# define WUSBGENCMDSTS_IOC (1 << 23) +# define WUSBGENCMDSTS_MMCIE_ADD 0x01 +# define WUSBGENCMDSTS_MMCIE_RM 0x02 +# define WUSBGENCMDSTS_SET_MAS 0x03 +# define WUSBGENCMDSTS_CHAN_STOP 0x04 +# define WUSBGENCMDSTS_RWP_EN 0x05 + +#define WUSBGENCMDPARAMS 0x18 +#define WUSBGENADDR 0x20 +#define WUSBASYNCLISTADDR 0x28 +#define WUSBDNTSBUFADDR 0x30 +#define WUSBDEVICEINFOADDR 0x38 + +#define WUSBSETSECKEYCMD 0x40 +# define WUSBSETSECKEYCMD_SET (1 << 31) +# define WUSBSETSECKEYCMD_ERASE (1 << 30) +# define WUSBSETSECKEYCMD_GTK (1 << 8) +# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0) + +#define WUSBTKID 0x44 +#define WUSBSECKEY 0x48 +#define WUSBPERIODICLISTBASE 0x58 +#define WUSBMASINDEX 0x60 + +#define WUSBDNTSCTRL 0x64 +# define WUSBDNTSCTRL_ACTIVE (1 << 31) +# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8) +# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0) + +#define WUSBTIME 0x68 +#define WUSBBPST 0x6c +#define WUSBDIBUPDATED 0x70 + +#endif /* #ifndef _WHCI_WHCI_HC_H */ diff --git a/drivers/usb/host/whci/wusb.c b/drivers/usb/host/whci/wusb.c new file mode 100644 index 0000000..66e4ddc --- /dev/null +++ b/drivers/usb/host/whci/wusb.c @@ -0,0 +1,241 @@ +/* + * Wireless Host Controller (WHC) WUSB operations. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/uwb/umc.h> +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +#if D_LOCAL >= 1 +static void dump_di(struct whc *whc, int idx) +{ + struct di_buf_entry *di = &whc->di_buf[idx]; + struct device *dev = &whc->umc->dev; + char buf[128]; + + bitmap_scnprintf(buf, sizeof(buf), (unsigned long *)di->availability_info, UWB_NUM_MAS); + + d_printf(1, dev, "DI[%d]\n", idx); + d_printf(1, dev, " availability: %s\n", buf); + d_printf(1, dev, " %c%c key idx: %d dev addr: %d\n", + (di->addr_sec_info & WHC_DI_SECURE) ? 'S' : ' ', + (di->addr_sec_info & WHC_DI_DISABLE) ? 'D' : ' ', + (di->addr_sec_info & WHC_DI_KEY_IDX_MASK) >> 8, + (di->addr_sec_info & WHC_DI_DEV_ADDR_MASK)); +} +#else +static inline void dump_di(struct whc *whc, int idx) +{ +} +#endif + +static int whc_update_di(struct whc *whc, int idx) +{ + int offset = idx / 32; + u32 bit = 1 << (idx % 32); + + dump_di(whc, idx); + + le_writel(bit, whc->base + WUSBDIBUPDATED + offset); + + return whci_wait_for(&whc->umc->dev, + whc->base + WUSBDIBUPDATED + offset, bit, 0, + 100, "DI update"); +} + +/* + * WHCI starts and stops MMCs based on there being a valid GTK so + * these need only start/stop the asynchronous and periodic schedules. + */ + +int whc_wusbhc_start(struct wusbhc *wusbhc) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + + asl_start(whc); + pzl_start(whc); + + return 0; +} + +void whc_wusbhc_stop(struct wusbhc *wusbhc) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + + pzl_stop(whc); + asl_stop(whc); +} + +int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + u8 handle, struct wuie_hdr *wuie) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 params; + + params = (interval << 24) + | (repeat_cnt << 16) + | (wuie->bLength << 8) + | handle; + + return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_ADD, params, wuie, wuie->bLength); +} + +int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 params; + + params = handle; + + return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_RM, params, NULL, 0); +} + +int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + + if (stream_index >= 0) + whc_write_wusbcmd(whc, WUSBCMD_WUSBSI_MASK, WUSBCMD_WUSBSI(stream_index)); + + return whc_do_gencmd(whc, WUSBGENCMDSTS_SET_MAS, 0, (void *)mas_bm, sizeof(*mas_bm)); +} + +int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + int idx = wusb_dev->port_idx; + struct di_buf_entry *di = &whc->di_buf[idx]; + int ret; + + mutex_lock(&whc->mutex); + + uwb_mas_bm_copy_le(di->availability_info, &wusb_dev->availability); + di->addr_sec_info &= ~(WHC_DI_DISABLE | WHC_DI_DEV_ADDR_MASK); + di->addr_sec_info |= WHC_DI_DEV_ADDR(wusb_dev->addr); + + ret = whc_update_di(whc, idx); + + mutex_unlock(&whc->mutex); + + return ret; +} + +/* + * Set the number of Device Notification Time Slots (DNTS) and enable + * device notifications. + */ +int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 dntsctrl; + + dntsctrl = WUSBDNTSCTRL_ACTIVE + | WUSBDNTSCTRL_INTERVAL(interval) + | WUSBDNTSCTRL_SLOTS(slots); + + le_writel(dntsctrl, whc->base + WUSBDNTSCTRL); + + return 0; +} + +static int whc_set_key(struct whc *whc, u8 key_index, uint32_t tkid, + const void *key, size_t key_size, bool is_gtk) +{ + uint32_t setkeycmd; + uint32_t seckey[4]; + int i; + int ret; + + memcpy(seckey, key, key_size); + setkeycmd = WUSBSETSECKEYCMD_SET | WUSBSETSECKEYCMD_IDX(key_index); + if (is_gtk) + setkeycmd |= WUSBSETSECKEYCMD_GTK; + + le_writel(tkid, whc->base + WUSBTKID); + for (i = 0; i < 4; i++) + le_writel(seckey[i], whc->base + WUSBSECKEY + 4*i); + le_writel(setkeycmd, whc->base + WUSBSETSECKEYCMD); + + ret = whci_wait_for(&whc->umc->dev, whc->base + WUSBSETSECKEYCMD, + WUSBSETSECKEYCMD_SET, 0, 100, "set key"); + + return ret; +} + +/** + * whc_set_ptk - set the PTK to use for a device. + * + * The index into the key table for this PTK is the same as the + * device's port index. + */ +int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *ptk, size_t key_size) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + struct di_buf_entry *di = &whc->di_buf[port_idx]; + int ret; + + mutex_lock(&whc->mutex); + + if (ptk) { + ret = whc_set_key(whc, port_idx, tkid, ptk, key_size, false); + if (ret) + goto out; + + di->addr_sec_info &= ~WHC_DI_KEY_IDX_MASK; + di->addr_sec_info |= WHC_DI_SECURE | WHC_DI_KEY_IDX(port_idx); + } else + di->addr_sec_info &= ~WHC_DI_SECURE; + + ret = whc_update_di(whc, port_idx); +out: + mutex_unlock(&whc->mutex); + return ret; +} + +/** + * whc_set_gtk - set the GTK for subsequent broadcast packets + * + * The GTK is stored in the last entry in the key table (the previous + * N_DEVICES entries are for the per-device PTKs). + */ +int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, + const void *gtk, size_t key_size) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + int ret; + + mutex_lock(&whc->mutex); + + ret = whc_set_key(whc, whc->n_devices, tkid, gtk, key_size, true); + + mutex_unlock(&whc->mutex); + + return ret; +} + +int whc_set_cluster_id(struct whc *whc, u8 bcid) +{ + whc_write_wusbcmd(whc, WUSBCMD_BCID_MASK, WUSBCMD_BCID(bcid)); + return 0; +} |
