diff options
Diffstat (limited to 'drivers/usb/host')
-rw-r--r-- | drivers/usb/host/Kconfig | 9 | ||||
-rw-r--r-- | drivers/usb/host/Makefile | 4 | ||||
-rw-r--r-- | drivers/usb/host/xhci-mtk-sch.c | 415 | ||||
-rw-r--r-- | drivers/usb/host/xhci-mtk.c | 763 | ||||
-rw-r--r-- | drivers/usb/host/xhci-mtk.h | 162 | ||||
-rw-r--r-- | drivers/usb/host/xhci-ring.c | 16 | ||||
-rw-r--r-- | drivers/usb/host/xhci.c | 19 | ||||
-rw-r--r-- | drivers/usb/host/xhci.h | 1 |
8 files changed, 1383 insertions, 6 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 3bb0887..daa563f 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -41,6 +41,15 @@ config USB_XHCI_PLATFORM If unsure, say N. +config USB_XHCI_MTK + tristate "xHCI support for Mediatek MT65xx" + select MFD_SYSCON + depends on ARCH_MEDIATEK || COMPILE_TEST + ---help--- + Say 'Y' to enable the support for the xHCI host controller + found in Mediatek MT65xx SoCs. + If unsure, say N. + config USB_XHCI_MVEBU tristate "xHCI support for Marvell Armada 375/38x" select USB_XHCI_PLATFORM diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index e7558ab..65a06b4 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -13,6 +13,9 @@ fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o xhci-hcd-y := xhci.o xhci-mem.o xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o xhci-hcd-y += xhci-trace.o +ifneq ($(CONFIG_USB_XHCI_MTK), ) + xhci-hcd-y += xhci-mtk-sch.o +endif xhci-plat-hcd-y := xhci-plat.o ifneq ($(CONFIG_USB_XHCI_MVEBU), ) @@ -64,6 +67,7 @@ obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o +obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c new file mode 100644 index 0000000..c30de7c --- /dev/null +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -0,0 +1,415 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: + * Zhigang.Wei <zhigang.wei@mediatek.com> + * Chunfeng.Yun <chunfeng.yun@mediatek.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include "xhci.h" +#include "xhci-mtk.h" + +#define SS_BW_BOUNDARY 51000 +/* table 5-5. High-speed Isoc Transaction Limits in usb_20 spec */ +#define HS_BW_BOUNDARY 6144 +/* usb2 spec section11.18.1: at most 188 FS bytes per microframe */ +#define FS_PAYLOAD_MAX 188 + +/* mtk scheduler bitmasks */ +#define EP_BPKTS(p) ((p) & 0x3f) +#define EP_BCSCOUNT(p) (((p) & 0x7) << 8) +#define EP_BBM(p) ((p) << 11) +#define EP_BOFFSET(p) ((p) & 0x3fff) +#define EP_BREPEAT(p) (((p) & 0x7fff) << 16) + +static int is_fs_or_ls(enum usb_device_speed speed) +{ + return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW; +} + +/* +* get the index of bandwidth domains array which @ep belongs to. +* +* the bandwidth domain array is saved to @sch_array of struct xhci_hcd_mtk, +* each HS root port is treated as a single bandwidth domain, +* but each SS root port is treated as two bandwidth domains, one for IN eps, +* one for OUT eps. +* @real_port value is defined as follow according to xHCI spec: +* 1 for SSport0, ..., N+1 for SSportN, N+2 for HSport0, N+3 for HSport1, etc +* so the bandwidth domain array is organized as follow for simplification: +* SSport0-OUT, SSport0-IN, ..., SSportX-OUT, SSportX-IN, HSport0, ..., HSportY +*/ +static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct xhci_virt_device *virt_dev; + int bw_index; + + virt_dev = xhci->devs[udev->slot_id]; + + if (udev->speed == USB_SPEED_SUPER) { + if (usb_endpoint_dir_out(&ep->desc)) + bw_index = (virt_dev->real_port - 1) * 2; + else + bw_index = (virt_dev->real_port - 1) * 2 + 1; + } else { + /* add one more for each SS port */ + bw_index = virt_dev->real_port + xhci->num_usb3_ports - 1; + } + + return bw_index; +} + +static void setup_sch_info(struct usb_device *udev, + struct xhci_ep_ctx *ep_ctx, struct mu3h_sch_ep_info *sch_ep) +{ + u32 ep_type; + u32 ep_interval; + u32 max_packet_size; + u32 max_burst; + u32 mult; + u32 esit_pkts; + + ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2)); + ep_interval = CTX_TO_EP_INTERVAL(le32_to_cpu(ep_ctx->ep_info)); + max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); + max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2)); + mult = CTX_TO_EP_MULT(le32_to_cpu(ep_ctx->ep_info)); + + sch_ep->esit = 1 << ep_interval; + sch_ep->offset = 0; + sch_ep->burst_mode = 0; + + if (udev->speed == USB_SPEED_HIGH) { + sch_ep->cs_count = 0; + + /* + * usb_20 spec section5.9 + * a single microframe is enough for HS synchromous endpoints + * in a interval + */ + sch_ep->num_budget_microframes = 1; + sch_ep->repeat = 0; + + /* + * xHCI spec section6.2.3.4 + * @max_burst is the number of additional transactions + * opportunities per microframe + */ + sch_ep->pkts = max_burst + 1; + sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; + } else if (udev->speed == USB_SPEED_SUPER) { + /* usb3_r1 spec section4.4.7 & 4.4.8 */ + sch_ep->cs_count = 0; + esit_pkts = (mult + 1) * (max_burst + 1); + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { + sch_ep->pkts = esit_pkts; + sch_ep->num_budget_microframes = 1; + sch_ep->repeat = 0; + } + + if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) { + if (esit_pkts <= sch_ep->esit) + sch_ep->pkts = 1; + else + sch_ep->pkts = roundup_pow_of_two(esit_pkts) + / sch_ep->esit; + + sch_ep->num_budget_microframes = + DIV_ROUND_UP(esit_pkts, sch_ep->pkts); + + if (sch_ep->num_budget_microframes > 1) + sch_ep->repeat = 1; + else + sch_ep->repeat = 0; + } + sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; + } else if (is_fs_or_ls(udev->speed)) { + + /* + * usb_20 spec section11.18.4 + * assume worst cases + */ + sch_ep->repeat = 0; + sch_ep->pkts = 1; /* at most one packet for each microframe */ + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { + sch_ep->cs_count = 3; /* at most need 3 CS*/ + /* one for SS and one for budgeted transaction */ + sch_ep->num_budget_microframes = sch_ep->cs_count + 2; + sch_ep->bw_cost_per_microframe = max_packet_size; + } + if (ep_type == ISOC_OUT_EP) { + + /* + * the best case FS budget assumes that 188 FS bytes + * occur in each microframe + */ + sch_ep->num_budget_microframes = DIV_ROUND_UP( + max_packet_size, FS_PAYLOAD_MAX); + sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; + sch_ep->cs_count = sch_ep->num_budget_microframes; + } + if (ep_type == ISOC_IN_EP) { + /* at most need additional two CS. */ + sch_ep->cs_count = DIV_ROUND_UP( + max_packet_size, FS_PAYLOAD_MAX) + 2; + sch_ep->num_budget_microframes = sch_ep->cs_count + 2; + sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; + } + } +} + +/* Get maximum bandwidth when we schedule at offset slot. */ +static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw, + struct mu3h_sch_ep_info *sch_ep, u32 offset) +{ + u32 num_esit; + u32 max_bw = 0; + int i; + int j; + + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; + for (i = 0; i < num_esit; i++) { + u32 base = offset + i * sch_ep->esit; + + for (j = 0; j < sch_ep->num_budget_microframes; j++) { + if (sch_bw->bus_bw[base + j] > max_bw) + max_bw = sch_bw->bus_bw[base + j]; + } + } + return max_bw; +} + +static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, + struct mu3h_sch_ep_info *sch_ep, int bw_cost) +{ + u32 num_esit; + u32 base; + int i; + int j; + + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; + for (i = 0; i < num_esit; i++) { + base = sch_ep->offset + i * sch_ep->esit; + for (j = 0; j < sch_ep->num_budget_microframes; j++) + sch_bw->bus_bw[base + j] += bw_cost; + } +} + +static int check_sch_bw(struct usb_device *udev, + struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) +{ + u32 offset; + u32 esit; + u32 num_budget_microframes; + u32 min_bw; + u32 min_index; + u32 worst_bw; + u32 bw_boundary; + + if (sch_ep->esit > XHCI_MTK_MAX_ESIT) + sch_ep->esit = XHCI_MTK_MAX_ESIT; + + esit = sch_ep->esit; + num_budget_microframes = sch_ep->num_budget_microframes; + + /* + * Search through all possible schedule microframes. + * and find a microframe where its worst bandwidth is minimum. + */ + min_bw = ~0; + min_index = 0; + for (offset = 0; offset < esit; offset++) { + if ((offset + num_budget_microframes) > sch_ep->esit) + break; + + /* + * usb_20 spec section11.18: + * must never schedule Start-Split in Y6 + */ + if (is_fs_or_ls(udev->speed) && (offset % 8 == 6)) + continue; + + worst_bw = get_max_bw(sch_bw, sch_ep, offset); + if (min_bw > worst_bw) { + min_bw = worst_bw; + min_index = offset; + } + if (min_bw == 0) + break; + } + sch_ep->offset = min_index; + + bw_boundary = (udev->speed == USB_SPEED_SUPER) + ? SS_BW_BOUNDARY : HS_BW_BOUNDARY; + + /* check bandwidth */ + if (min_bw + sch_ep->bw_cost_per_microframe > bw_boundary) + return -ERANGE; + + /* update bus bandwidth info */ + update_bus_bw(sch_bw, sch_ep, sch_ep->bw_cost_per_microframe); + + return 0; +} + +static bool need_bw_sch(struct usb_host_endpoint *ep, + enum usb_device_speed speed, int has_tt) +{ + /* only for periodic endpoints */ + if (usb_endpoint_xfer_control(&ep->desc) + || usb_endpoint_xfer_bulk(&ep->desc)) + return false; + + /* + * for LS & FS periodic endpoints which its device don't attach + * to TT are also ignored, root-hub will schedule them directly + */ + if (is_fs_or_ls(speed) && !has_tt) + return false; + + return true; +} + +int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk) +{ + struct mu3h_sch_bw_info *sch_array; + int num_usb_bus; + int i; + + /* ss IN and OUT are separated */ + num_usb_bus = mtk->num_u3_ports * 2 + mtk->num_u2_ports; + + sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL); + if (sch_array == NULL) + return -ENOMEM; + + for (i = 0; i < num_usb_bus; i++) + INIT_LIST_HEAD(&sch_array[i].bw_ep_list); + + mtk->sch_array = sch_array; + + return 0; +} +EXPORT_SYMBOL_GPL(xhci_mtk_sch_init); + +void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk) +{ + kfree(mtk->sch_array); +} +EXPORT_SYMBOL_GPL(xhci_mtk_sch_exit); + +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); + struct xhci_hcd *xhci; + struct xhci_ep_ctx *ep_ctx; + struct xhci_slot_ctx *slot_ctx; + struct xhci_virt_device *virt_dev; + struct mu3h_sch_bw_info *sch_bw; + struct mu3h_sch_ep_info *sch_ep; + struct mu3h_sch_bw_info *sch_array; + unsigned int ep_index; + int bw_index; + int ret = 0; + + xhci = hcd_to_xhci(hcd); + virt_dev = xhci->devs[udev->slot_id]; + ep_index = xhci_get_endpoint_index(&ep->desc); + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); + sch_array = mtk->sch_array; + + xhci_dbg(xhci, "%s() type:%d, speed:%d, mpkt:%d, dir:%d, ep:%p\n", + __func__, usb_endpoint_type(&ep->desc), udev->speed, + GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)), + usb_endpoint_dir_in(&ep->desc), ep); + + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) + return 0; + + bw_index = get_bw_index(xhci, udev, ep); + sch_bw = &sch_array[bw_index]; + + sch_ep = kzalloc(sizeof(struct mu3h_sch_ep_info), GFP_NOIO); + if (!sch_ep) + return -ENOMEM; + + setup_sch_info(udev, ep_ctx, sch_ep); + + ret = check_sch_bw(udev, sch_bw, sch_ep); + if (ret) { + xhci_err(xhci, "Not enough bandwidth!\n"); + kfree(sch_ep); + return -ENOSPC; + } + + list_add_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list); + sch_ep->ep = ep; + + ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts) + | EP_BCSCOUNT(sch_ep->cs_count) | EP_BBM(sch_ep->burst_mode)); + ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset) + | EP_BREPEAT(sch_ep->repeat)); + + xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n", + sch_ep->pkts, sch_ep->cs_count, sch_ep->burst_mode, + sch_ep->offset, sch_ep->repeat); + + return 0; +} +EXPORT_SYMBOL_GPL(xhci_mtk_add_ep_quirk); + +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); + struct xhci_hcd *xhci; + struct xhci_slot_ctx *slot_ctx; + struct xhci_virt_device *virt_dev; + struct mu3h_sch_bw_info *sch_array; + struct mu3h_sch_bw_info *sch_bw; + struct mu3h_sch_ep_info *sch_ep; + int bw_index; + + xhci = hcd_to_xhci(hcd); + virt_dev = xhci->devs[udev->slot_id]; + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); + sch_array = mtk->sch_array; + + xhci_dbg(xhci, "%s() type:%d, speed:%d, mpks:%d, dir:%d, ep:%p\n", + __func__, usb_endpoint_type(&ep->desc), udev->speed, + GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)), + usb_endpoint_dir_in(&ep->desc), ep); + + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) + return; + + bw_index = get_bw_index(xhci, udev, ep); + sch_bw = &sch_array[bw_index]; + + list_for_each_entry(sch_ep, &sch_bw->bw_ep_list, endpoint) { + if (sch_ep->ep == ep) { + update_bus_bw(sch_bw, sch_ep, + -sch_ep->bw_cost_per_microframe); + list_del(&sch_ep->endpoint); + kfree(sch_ep); + break; + } + } +} +EXPORT_SYMBOL_GPL(xhci_mtk_drop_ep_quirk); diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c new file mode 100644 index 0000000..c9ab6a4 --- /dev/null +++ b/drivers/usb/host/xhci-mtk.c @@ -0,0 +1,763 @@ +/* + * MediaTek xHCI Host Controller Driver + * + * Copyright (c) 2015 MediaTek Inc. + * Author: + * Chunfeng Yun <chunfeng.yun@mediatek.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> + +#include "xhci.h" +#include "xhci-mtk.h" + +/* ip_pw_ctrl0 register */ +#define CTRL0_IP_SW_RST BIT(0) + +/* ip_pw_ctrl1 register */ +#define CTRL1_IP_HOST_PDN BIT(0) + +/* ip_pw_ctrl2 register */ +#define CTRL2_IP_DEV_PDN BIT(0) + +/* ip_pw_sts1 register */ +#define STS1_IP_SLEEP_STS BIT(30) +#define STS1_XHCI_RST BIT(11) +#define STS1_SYS125_RST BIT(10) +#define STS1_REF_RST BIT(8) +#define STS1_SYSPLL_STABLE BIT(0) + +/* ip_xhci_cap register */ +#define CAP_U3_PORT_NUM(p) ((p) & 0xff) +#define CAP_U2_PORT_NUM(p) (((p) >> 8) & 0xff) + +/* u3_ctrl_p register */ +#define CTRL_U3_PORT_HOST_SEL BIT(2) +#define CTRL_U3_PORT_PDN BIT(1) +#define CTRL_U3_PORT_DIS BIT(0) + +/* u2_ctrl_p register */ +#define CTRL_U2_PORT_HOST_SEL BIT(2) +#define CTRL_U2_PORT_PDN BIT(1) +#define CTRL_U2_PORT_DIS BIT(0) + +/* u2_phy_pll register */ +#define CTRL_U2_FORCE_PLL_STB BIT(28) + +#define PERI_WK_CTRL0 0x400 +#define UWK_CTR0_0P_LS_PE BIT(8) /* posedge */ +#define UWK_CTR0_0P_LS_NE BIT(7) /* negedge for 0p linestate*/ +#define UWK_CTL1_1P_LS_C(x) (((x) & 0xf) << 1) +#define UWK_CTL1_1P_LS_E BIT(0) + +#define PERI_WK_CTRL1 0x404 +#define UWK_CTL1_IS_C(x) (((x) & 0xf) << 26) +#define UWK_CTL1_IS_E BIT(25) +#define UWK_CTL1_0P_LS_C(x) (((x) & 0xf) << 21) +#define UWK_CTL1_0P_LS_E BIT(20) +#define UWK_CTL1_IDDIG_C(x) (((x) & 0xf) << 11) /* cycle debounce */ +#define UWK_CTL1_IDDIG_E BIT(10) /* enable debounce */ +#define UWK_CTL1_IDDIG_P BIT(9) /* polarity */ +#define UWK_CTL1_0P_LS_P BIT(7) +#define UWK_CTL1_IS_P BIT(6) /* polarity for ip sleep */ + +enum ssusb_wakeup_src { + SSUSB_WK_IP_SLEEP = 1, + SSUSB_WK_LINE_STATE = 2, +}; + +static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk) +{ + struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; + u32 value, check_val; + int ret; + int i; + + /* power on host ip */ + value = readl(&ippc->ip_pw_ctr1); + value &= ~CTRL1_IP_HOST_PDN; + writel(value, &ippc->ip_pw_ctr1); + + /* power on and enable all u3 ports */ + for (i = 0; i < mtk->num_u3_ports; i++) { + value = readl(&ippc->u3_ctrl_p[i]); + value &= ~(CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS); + value |= CTRL_U3_PORT_HOST_SEL; + writel(value, &ippc->u3_ctrl_p[i]); + } + + /* power on and enable all u2 ports */ + for (i = 0; i < mtk->num_u2_ports; i++) { + value = readl(&ippc->u2_ctrl_p[i]); + value &= ~(CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS); + value |= CTRL_U2_PORT_HOST_SEL; + writel(value, &ippc->u2_ctrl_p[i]); + } + + /* + * wait for clocks to be stable, and clock domains reset to + * be inactive after power on and enable ports + */ + check_val = STS1_SYSPLL_STABLE | STS1_REF_RST | + STS1_SYS125_RST | STS1_XHCI_RST; + + ret = readl_poll_timeout(&ippc->ip_pw_sts1, value, + (check_val == (value & check_val)), 100, 20000); + if (ret) { + dev_err(mtk->dev, "clocks are not stable (0x%x)\n", value); + return ret; + } + + return 0; +} + +static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk) +{ + struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; + u32 value; + int ret; + int i; + + /* power down all u3 ports */ + for (i = 0; i < mtk->num_u3_ports; i++) { + value = readl(&ippc->u3_ctrl_p[i]); + value |= CTRL_U3_PORT_PDN; + writel(value, &ippc->u3_ctrl_p[i]); + } + + /* power down all u2 ports */ + for (i = 0; i < mtk->num_u2_ports; i++) { + value = readl(&ippc->u2_ctrl_p[i]); + value |= CTRL_U2_PORT_PDN; + writel(value, &ippc->u2_ctrl_p[i]); + } + + /* power down host ip */ + value = readl(&ippc->ip_pw_ctr1); + value |= CTRL1_IP_HOST_PDN; + writel(value, &ippc->ip_pw_ctr1); + + /* wait for host ip to sleep */ + ret = readl_poll_timeout(&ippc->ip_pw_sts1, value, + (value & STS1_IP_SLEEP_STS), 100, 100000); + if (ret) { + dev_err(mtk->dev, "ip sleep failed!!!\n"); + return ret; + } + return 0; +} + +static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk) +{ + struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; + u32 value; + + /* reset whole ip */ + value = readl(&ippc->ip_pw_ctr0); + value |= CTRL0_IP_SW_RST; + writel(value, &ippc->ip_pw_ctr0); + udelay(1); + value = readl(&ippc->ip_pw_ctr0); + value &= ~CTRL0_IP_SW_RST; + writel(value, &ippc->ip_pw_ctr0); + + /* + * device ip is default power-on in fact + * power down device ip, otherwise ip-sleep will fail + */ + value = readl(&ippc->ip_pw_ctr2); + value |= CTRL2_IP_DEV_PDN; + writel(value, &ippc->ip_pw_ctr2); + + value = readl(&ippc->ip_xhci_cap); + mtk->num_u3_ports = CAP_U3_PORT_NUM(value); + mtk->num_u2_ports = CAP_U2_PORT_NUM(value); + dev_dbg(mtk->dev, "%s u2p:%d, u3p:%d\n", __func__, + mtk->num_u2_ports, mtk->num_u3_ports); + + return xhci_mtk_host_enable(mtk); +} + +static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk) +{ + int ret; + + ret = clk_prepare_enable(mtk->sys_clk); + if (ret) { + dev_err(mtk->dev, "failed to enable sys_clk\n"); + goto sys_clk_err; + } + + if (mtk->wakeup_src) { + ret = clk_prepare_enable(mtk->wk_deb_p0); + if (ret) { + dev_err(mtk->dev, "failed to enable wk_deb_p0\n"); + goto usb_p0_err; + } + + ret = clk_prepare_enable(mtk->wk_deb_p1); + if (ret) { + dev_err(mtk->dev, "failed to enable wk_deb_p1\n"); + goto usb_p1_err; + } + } + return 0; + +usb_p1_err: + clk_disable_unprepare(mtk->wk_deb_p0); +usb_p0_err: + clk_disable_unprepare(mtk->sys_clk); +sys_clk_err: + return -EINVAL; +} + +static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk) +{ + if (mtk->wakeup_src) { + clk_disable_unprepare(mtk->wk_deb_p1); + clk_disable_unprepare(mtk->wk_deb_p0); + } + clk_disable_unprepare(mtk->sys_clk); +} + +/* only clocks can be turn off for ip-sleep wakeup mode */ +static void usb_wakeup_ip_sleep_en(struct xhci_hcd_mtk *mtk) +{ + u32 tmp; + struct regmap *pericfg = mtk->pericfg; + + regmap_read(pericfg, PERI_WK_CTRL1, &tmp); + tmp &= ~UWK_CTL1_IS_P; + tmp &= ~(UWK_CTL1_IS_C(0xf)); + tmp |= UWK_CTL1_IS_C(0x8); + regmap_write(pericfg, PERI_WK_CTRL1, tmp); + regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E); + + regmap_read(pericfg, PERI_WK_CTRL1, &tmp); + dev_dbg(mtk->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n", + __func__, tmp); +} + +static void usb_wakeup_ip_sleep_dis(struct xhci_hcd_mtk *mtk) +{ + u32 tmp; + + regmap_read(mtk->pericfg, PERI_WK_CTRL1, &tmp); + tmp &= ~UWK_CTL1_IS_E; + regmap_write(mtk->pericfg, PERI_WK_CTRL1, tmp); +} + +/* +* for line-state wakeup mode, phy's power should not power-down +* and only support cable plug in/out +*/ +static void usb_wakeup_line_state_en(struct xhci_hcd_mtk *mtk) +{ + u32 tmp; + struct regmap *pericfg = mtk->pericfg; + + /* line-state of u2-port0 */ + regmap_read(pericfg, PERI_WK_CTRL1, &tmp); + tmp &= ~UWK_CTL1_0P_LS_P; + tmp &= ~(UWK_CTL1_0P_LS_C(0xf)); + tmp |= UWK_CTL1_0P_LS_C(0x8); + regmap_write(pericfg, PERI_WK_CTRL1, tmp); + regmap_read(pericfg, PERI_WK_CTRL1, &tmp); + regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_0P_LS_E); + + /* line-state of u2-port1 */ + regmap_read(pericfg, PERI_WK_CTRL0, &tmp); + tmp &= ~(UWK_CTL1_1P_LS_C(0xf)); + tmp |= UWK_CTL1_1P_LS_C(0x8); + regmap_write(pericfg, PERI_WK_CTRL0, tmp); + regmap_write(pericfg, PERI_WK_CTRL0, tmp | UWK_CTL1_1P_LS_E); +} + +static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk) +{ + u32 tmp; + struct regmap *pericfg = mtk->pericfg; + + /* line-state of u2-port0 */ + regmap_read(pericfg, PERI_WK_CTRL1, &tmp); + tmp &= ~UWK_CTL1_0P_LS_E; + regmap_write(pericfg, PERI_WK_CTRL1, tmp); + + /* line-state of u2-port1 */ + regmap_read(pericfg, PERI_WK_CTRL0, &tmp); + tmp &= ~UWK_CTL1_1P_LS_E; + regmap_write(pericfg, PERI_WK_CTRL0, tmp); +} + +static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk) +{ + if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP) + usb_wakeup_ip_sleep_en(mtk); + else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE) + usb_wakeup_line_state_en(mtk); +} + +static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk) +{ + if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP) + usb_wakeup_ip_sleep_dis(mtk); + else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE) + usb_wakeup_line_state_dis(mtk); +} + +static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk, + struct device_node *dn) +{ + struct device *dev = mtk->dev; + + /* + * wakeup function is optional, so it is not an error if this property + * does not exist, and in such case, no need to get relative + * properties anymore. + */ + of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src); + if (!mtk->wakeup_src) + return 0; + + mtk->wk_deb_p0 = devm_clk_get(dev, "wakeup_deb_p0"); + if (IS_ERR(mtk->wk_deb_p0)) { + dev_err(dev, "fail to get wakeup_deb_p0\n"); + return PTR_ERR(mtk->wk_deb_p0); + } + + mtk->wk_deb_p1 = devm_clk_get(dev, "wakeup_deb_p1"); + if (IS_ERR(mtk->wk_deb_p1)) { + dev_err(dev, "fail to get wakeup_deb_p1\n"); + return PTR_ERR(mtk->wk_deb_p1); + } + + mtk->pericfg = syscon_regmap_lookup_by_phandle(dn, + "mediatek,syscon-wakeup"); + if (IS_ERR(mtk->pericfg)) { + dev_err(dev, "fail to get pericfg regs\n"); + return PTR_ERR(mtk->pericfg); + } + + return 0; +} + +static int xhci_mtk_setup(struct usb_hcd *hcd); +static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = { + .extra_priv_size = sizeof(struct xhci_hcd), + .reset = xhci_mtk_setup, +}; + +static struct hc_driver __read_mostly xhci_mtk_hc_driver; + +static int xhci_mtk_phy_init(struct xhci_hcd_mtk *mtk) +{ + int i; + int ret; + + for (i = 0; i < mtk->num_phys; i++) { + ret = phy_init(mtk->phys[i]); + if (ret) + goto exit_phy; + } + return 0; + +exit_phy: + for (; i > 0; i--) + phy_exit(mtk->phys[i - 1]); + + return ret; +} + +static int xhci_mtk_phy_exit(struct xhci_hcd_mtk *mtk) +{ + int i; + + for (i = 0; i < mtk->num_phys; i++) + phy_exit(mtk->phys[i]); + + return 0; +} + +static int xhci_mtk_phy_power_on(struct xhci_hcd_mtk *mtk) +{ + int i; + int ret; + + for (i = 0; i < mtk->num_phys; i++) { + ret = phy_power_on(mtk->phys[i]); + if (ret) + goto power_off_phy; + } + return 0; + +power_off_phy: + for (; i > 0; i--) + phy_power_off(mtk->phys[i - 1]); + + return ret; +} + +static void xhci_mtk_phy_power_off(struct xhci_hcd_mtk *mtk) +{ + unsigned int i; + + for (i = 0; i < mtk->num_phys; i++) + phy_power_off(mtk->phys[i]); +} + +static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk) +{ + int ret; + + ret = regulator_enable(mtk->vbus); + if (ret) { + dev_err(mtk->dev, "failed to enable vbus\n"); + return ret; + } + + ret = regulator_enable(mtk->vusb33); + if (ret) { + dev_err(mtk->dev, "failed to enable vusb33\n"); + regulator_disable(mtk->vbus); + return ret; + } + return 0; +} + +static void xhci_mtk_ldos_disable(struct xhci_hcd_mtk *mtk) +{ + regulator_disable(mtk->vbus); + regulator_disable(mtk->vusb33); +} + +static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) +{ + struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); + + /* + * As of now platform drivers don't provide MSI support so we ensure + * here that the generic code does not try to make a pci_dev from our + * dev struct in order to setup MSI + */ + xhci->quirks |= XHCI_PLAT; + xhci->quirks |= XHCI_MTK_HOST; + /* + * MTK host controller gives a spurious successful event after a + * short transfer. Ignore it. + */ + xhci->quirks |= XHCI_SPURIOUS_SUCCESS; + if (mtk->lpm_support) + xhci->quirks |= XHCI_LPM_SUPPORT; +} + +/* called during probe() after chip reset completes */ +static int xhci_mtk_setup(struct usb_hcd *hcd) +{ + struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); + int ret; + + if (usb_hcd_is_primary_hcd(hcd)) { + ret = xhci_mtk_ssusb_config(mtk); + if (ret) + return ret; + ret = xhci_mtk_sch_init(mtk); + if (ret) + return ret; + } + + return xhci_gen_setup(hcd, xhci_mtk_quirks); +} + +static int xhci_mtk_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct xhci_hcd_mtk *mtk; + const struct hc_driver *driver; + struct xhci_hcd *xhci; + struct resource *res; + struct usb_hcd *hcd; + struct phy *phy; + int phy_num; + int ret = -ENODEV; + int irq; + + if (usb_disabled()) + return -ENODEV; + + driver = &xhci_mtk_hc_driver; + mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); + if (!mtk) + return -ENOMEM; + + mtk->dev = dev; + mtk->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(mtk->vbus)) { + dev_err(dev, "fail to get vbus\n"); + return PTR_ERR(mtk->vbus); + } + + mtk->vusb33 = devm_regulator_get(dev, "vusb33"); + if (IS_ERR(mtk->vusb33)) { + dev_err(dev, "fail to get vusb33\n"); + return PTR_ERR(mtk->vusb33); + } + + mtk->sys_clk = devm_clk_get(dev, "sys_ck"); + if (IS_ERR(mtk->sys_clk)) { + dev_err(dev, "fail to get sys_ck\n"); + return PTR_ERR(mtk->sys_clk); + } + + mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable"); + + ret = usb_wakeup_of_property_parse(mtk, node); + if (ret) + return ret; + + mtk->num_phys = of_count_phandle_with_args(node, + "phys", "#phy-cells"); + if (mtk->num_phys > 0) { + mtk->phys = devm_kcalloc(dev, mtk->num_phys, + sizeof(*mtk->phys), GFP_KERNEL); + if (!mtk->phys) + return -ENOMEM; + } else { + mtk->num_phys = 0; + } + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + device_enable_async_suspend(dev); + + ret = xhci_mtk_ldos_enable(mtk); + if (ret) + goto disable_pm; + + ret = xhci_mtk_clks_enable(mtk); + if (ret) + goto disable_ldos; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + goto disable_clk; + + /* Initialize dma_mask and coherent_dma_mask to 32-bits */ + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); + if (ret) + goto disable_clk; + + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + else + dma_set_mask(dev, DMA_BIT_MASK(32)); + + hcd = usb_create_hcd(driver, dev, dev_name(dev)); + if (!hcd) { + ret = -ENOMEM; + goto disable_clk; + } + + /* + * USB 2.0 roothub is stored in the platform_device. + * Swap it with mtk HCD. + */ + mtk->hcd = platform_get_drvdata(pdev); + platform_set_drvdata(pdev, mtk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(hcd->regs)) { + ret = PTR_ERR(hcd->regs); + goto put_usb2_hcd; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + mtk->ippc_regs = devm_ioremap_resource(dev, res); + if (IS_ERR(mtk->ippc_regs)) { + ret = PTR_ERR(mtk->ippc_regs); + goto put_usb2_hcd; + } + + for (phy_num = 0; phy_num < mtk->num_phys; phy_num++) { + phy = devm_of_phy_get_by_index(dev, node, phy_num); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto put_usb2_hcd; + } + mtk->phys[phy_num] = phy; + } + + ret = xhci_mtk_phy_init(mtk); + if (ret) + goto put_usb2_hcd; + + ret = xhci_mtk_phy_power_on(mtk); + if (ret) + goto exit_phys; + + device_init_wakeup(dev, true); + + xhci = hcd_to_xhci(hcd); + xhci->main_hcd = hcd; + xhci->shared_hcd = usb_create_shared_hcd(driver, dev, + dev_name(dev), hcd); + if (!xhci->shared_hcd) { + ret = -ENOMEM; + goto power_off_phys; + } + + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) + goto put_usb3_hcd; + + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); + if (ret) + goto dealloc_usb2_hcd; + + return 0; + +dealloc_usb2_hcd: + usb_remove_hcd(hcd); + +put_usb3_hcd: + xhci_mtk_sch_exit(mtk); + usb_put_hcd(xhci->shared_hcd); + +power_off_phys: + xhci_mtk_phy_power_off(mtk); + device_init_wakeup(dev, false); + +exit_phys: + xhci_mtk_phy_exit(mtk); + +put_usb2_hcd: + usb_put_hcd(hcd); + +disable_clk: + xhci_mtk_clks_disable(mtk); + +disable_ldos: + xhci_mtk_ldos_disable(mtk); + +disable_pm: + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + return ret; +} + +static int xhci_mtk_remove(struct platform_device *dev) +{ + struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev); + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + usb_remove_hcd(xhci->shared_hcd); + xhci_mtk_phy_power_off(mtk); + xhci_mtk_phy_exit(mtk); + device_init_wakeup(&dev->dev, false); + + usb_remove_hcd(hcd); + usb_put_hcd(xhci->shared_hcd); + usb_put_hcd(hcd); + xhci_mtk_sch_exit(mtk); + xhci_mtk_clks_disable(mtk); + xhci_mtk_ldos_disable(mtk); + pm_runtime_put_sync(&dev->dev); + pm_runtime_disable(&dev->dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int xhci_mtk_suspend(struct device *dev) +{ + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + + xhci_mtk_host_disable(mtk); + xhci_mtk_phy_power_off(mtk); + xhci_mtk_clks_disable(mtk); + usb_wakeup_enable(mtk); + return 0; +} + +static int xhci_mtk_resume(struct device *dev) +{ + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + + usb_wakeup_disable(mtk); + xhci_mtk_clks_enable(mtk); + xhci_mtk_phy_power_on(mtk); + xhci_mtk_host_enable(mtk); + return 0; +} + +static const struct dev_pm_ops xhci_mtk_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) +}; +#define DEV_PM_OPS (&xhci_mtk_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + +#ifdef CONFIG_OF +static const struct of_device_id mtk_xhci_of_match[] = { + { .compatible = "mediatek,mt8173-xhci"}, + { }, +}; +MODULE_DEVICE_TABLE(of, mtk_xhci_of_match); +#endif + +static struct platform_driver mtk_xhci_driver = { + .probe = xhci_mtk_probe, + .remove = xhci_mtk_remove, + .driver = { + .name = "xhci-mtk", + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(mtk_xhci_of_match), + }, +}; +MODULE_ALIAS("platform:xhci-mtk"); + +static int __init xhci_mtk_init(void) +{ + xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides); + return platform_driver_register(&mtk_xhci_driver); +} +module_init(xhci_mtk_init); + +static void __exit xhci_mtk_exit(void) +{ + platform_driver_unregister(&mtk_xhci_driver); +} +module_exit(xhci_mtk_exit); + +MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); +MODULE_DESCRIPTION("MediaTek xHCI Host Controller Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h new file mode 100644 index 0000000..7da677c --- /dev/null +++ b/drivers/usb/host/xhci-mtk.h @@ -0,0 +1,162 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: + * Zhigang.Wei <zhigang.wei@mediatek.com> + * Chunfeng.Yun <chunfeng.yun@mediatek.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _XHCI_MTK_H_ +#define _XHCI_MTK_H_ + +#include "xhci.h" + +/** + * To simplify scheduler algorithm, set a upper limit for ESIT, + * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, + * round down to the limit value, that means allocating more + * bandwidth to it. + */ +#define XHCI_MTK_MAX_ESIT 64 + +/** + * struct mu3h_sch_bw_info: schedule information for bandwidth domain + * + * @bus_bw: array to keep track of bandwidth already used at each uframes + * @bw_ep_list: eps in the bandwidth domain + * + * treat a HS root port as a bandwidth domain, but treat a SS root port as + * two bandwidth domains, one for IN eps and another for OUT eps. + */ +struct mu3h_sch_bw_info { + u32 bus_bw[XHCI_MTK_MAX_ESIT]; + struct list_head bw_ep_list; +}; + +/** + * struct mu3h_sch_ep_info: schedule information for endpoint + * + * @esit: unit is 125us, equal to 2 << Interval field in ep-context + * @num_budget_microframes: number of continuous uframes + * (@repeat==1) scheduled within the interval + * @bw_cost_per_microframe: bandwidth cost per microframe + * @endpoint: linked into bandwidth domain which it belongs to + * @ep: address of usb_host_endpoint struct + * @offset: which uframe of the interval that transfer should be + * scheduled first time within the interval + * @repeat: the time gap between two uframes that transfers are + * scheduled within a interval. in the simple algorithm, only + * assign 0 or 1 to it; 0 means using only one uframe in a + * interval, and 1 means using @num_budget_microframes + * continuous uframes + * @pkts: number of packets to be transferred in the scheduled uframes + * @cs_count: number of CS that host will trigger + * @burst_mode: burst mode for scheduling. 0: normal burst mode, + * distribute the bMaxBurst+1 packets for a single burst + * according to @pkts and @repeat, repeate the burst multiple + * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets + * according to @pkts and @repeat. normal mode is used by + * default + */ +struct mu3h_sch_ep_info { + u32 esit; + u32 num_budget_microframes; + u32 bw_cost_per_microframe; + struct list_head endpoint; + void *ep; + /* + * mtk xHCI scheduling information put into reserved DWs + * in ep context + */ + u32 offset; + u32 repeat; + u32 pkts; + u32 cs_count; + u32 burst_mode; +}; + +#define MU3C_U3_PORT_MAX 4 +#define MU3C_U2_PORT_MAX 5 + +/** + * struct mu3c_ippc_regs: MTK ssusb ip port control registers + * @ip_pw_ctr0~3: ip power and clock control registers + * @ip_pw_sts1~2: ip power and clock status registers + * @ip_xhci_cap: ip xHCI capability register + * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used + * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used + * @u2_phy_pll: usb2 phy pll control register + */ +struct mu3c_ippc_regs { + __le32 ip_pw_ctr0; + __le32 ip_pw_ctr1; + __le32 ip_pw_ctr2; + __le32 ip_pw_ctr3; + __le32 ip_pw_sts1; + __le32 ip_pw_sts2; + __le32 reserved0[3]; + __le32 ip_xhci_cap; + __le32 reserved1[2]; + __le64 u3_ctrl_p[MU3C_U3_PORT_MAX]; + __le64 u2_ctrl_p[MU3C_U2_PORT_MAX]; + __le32 reserved2; + __le32 u2_phy_pll; + __le32 reserved3[33]; /* 0x80 ~ 0xff */ +}; + +struct xhci_hcd_mtk { + struct device *dev; + struct usb_hcd *hcd; + struct mu3h_sch_bw_info *sch_array; + struct mu3c_ippc_regs __iomem *ippc_regs; + int num_u2_ports; + int num_u3_ports; + struct regulator *vusb33; + struct regulator *vbus; + struct clk *sys_clk; /* sys and mac clock */ + struct clk *wk_deb_p0; /* port0's wakeup debounce clock */ + struct clk *wk_deb_p1; + struct regmap *pericfg; + struct phy **phys; + int num_phys; + int wakeup_src; + bool lpm_support; +}; + +static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd) +{ + return dev_get_drvdata(hcd->self.controller); +} + +#if IS_ENABLED(CONFIG_USB_XHCI_MTK) +int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk); +void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk); +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep); +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep); + +#else +static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, + struct usb_device *udev, struct usb_host_endpoint *ep) +{ + return 0; +} + +static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, + struct usb_device *udev, struct usb_host_endpoint *ep) +{ +} + +#endif + +#endif /* _XHCI_MTK_H_ */ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 6c5e813..8fab758 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -68,6 +68,7 @@ #include <linux/slab.h> #include "xhci.h" #include "xhci-trace.h" +#include "xhci-mtk.h" /* * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA @@ -3074,17 +3075,22 @@ static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred, { u32 maxp, total_packet_count; - if (xhci->hci_version < 0x100) + /* MTK xHCI is mostly 0.97 but contains some features from 1.0 */ + if (xhci->hci_version < 0x100 && !(xhci->quirks & XHCI_MTK_HOST)) return ((td_total_len - transferred) >> 10); - maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc)); - total_packet_count = DIV_ROUND_UP(td_total_len, maxp); - /* One TRB with a zero-length data packet. */ if (num_trbs_left == 0 || (transferred == 0 && trb_buff_len == 0) || trb_buff_len == td_total_len) return 0; + /* for MTK xHCI, TD size doesn't include this TRB */ + if (xhci->quirks & XHCI_MTK_HOST) + trb_buff_len = 0; + + maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc)); + total_packet_count = DIV_ROUND_UP(td_total_len, maxp); + /* Queueing functions don't count the current TRB into transferred */ return (total_packet_count - ((transferred + trb_buff_len) / maxp)); } @@ -3472,7 +3478,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field |= 0x1; /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */ - if (xhci->hci_version >= 0x100) { + if ((xhci->hci_version >= 0x100) || (xhci->quirks & XHCI_MTK_HOST)) { if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) field |= TRB_TX_TYPE(TRB_DATA_IN); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ac25e90..887f308 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -31,6 +31,7 @@ #include "xhci.h" #include "xhci-trace.h" +#include "xhci-mtk.h" #define DRIVER_AUTHOR "Sarah Sharp" #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" @@ -634,7 +635,11 @@ int xhci_run(struct usb_hcd *hcd) "// Set the interrupt modulation register"); temp = readl(&xhci->ir_set->irq_control); temp &= ~ER_IRQ_INTERVAL_MASK; - temp |= (u32) 160; + /* + * the increment interval is 8 times as much as that defined + * in xHCI spec on MTK's controller + */ + temp |= (u32) ((xhci->quirks & XHCI_MTK_HOST) ? 20 : 160); writel(temp, &xhci->ir_set->irq_control); /* Set the HCD state before we enable the irqs */ @@ -1698,6 +1703,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); + if (xhci->quirks & XHCI_MTK_HOST) + xhci_mtk_drop_ep_quirk(hcd, udev, ep); + xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", (unsigned int) ep->desc.bEndpointAddress, udev->slot_id, @@ -1793,6 +1801,15 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, return -ENOMEM; } + if (xhci->quirks & XHCI_MTK_HOST) { + ret = xhci_mtk_add_ep_quirk(hcd, udev, ep); + if (ret < 0) { + xhci_free_or_cache_endpoint_ring(xhci, + virt_dev, ep_index); + return ret; + } + } + ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8b46296..9be7348 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1630,6 +1630,7 @@ struct xhci_hcd { /* For controllers with a broken beyond repair streams implementation */ #define XHCI_BROKEN_STREAMS (1 << 19) #define XHCI_PME_STUCK_QUIRK (1 << 20) +#define XHCI_MTK_HOST (1 << 21) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ |