summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci.h')
-rw-r--r--drivers/usb/host/xhci.h72
1 files changed, 61 insertions, 11 deletions
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index dbda41e..be9048e 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -29,6 +29,8 @@
#include <linux/kernel.h>
#include <linux/usb/hcd.h>
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
/* Code sharing between pci-quirks and xhci hcd */
#include "xhci-ext-caps.h"
#include "pci-quirks.h"
@@ -56,6 +58,7 @@
* @hcc_params: HCCPARAMS - Capability Parameters
* @db_off: DBOFF - Doorbell array offset
* @run_regs_off: RTSOFF - Runtime register space offset
+ * @hcc_params2: HCCPARAMS2 Capability Parameters 2, xhci 1.1 only
*/
struct xhci_cap_regs {
__le32 hc_capbase;
@@ -65,6 +68,7 @@ struct xhci_cap_regs {
__le32 hcc_params;
__le32 db_off;
__le32 run_regs_off;
+ __le32 hcc_params2; /* xhci 1.1 */
/* Reserved up to (CAPLENGTH - 0x1C) */
};
@@ -134,6 +138,21 @@ struct xhci_cap_regs {
/* run_regs_off bitmask - bits 0:4 reserved */
#define RTSOFF_MASK (~0x1f)
+/* HCCPARAMS2 - hcc_params2 - bitmasks */
+/* true: HC supports U3 entry Capability */
+#define HCC2_U3C(p) ((p) & (1 << 0))
+/* true: HC supports Configure endpoint command Max exit latency too large */
+#define HCC2_CMC(p) ((p) & (1 << 1))
+/* true: HC supports Force Save context Capability */
+#define HCC2_FSC(p) ((p) & (1 << 2))
+/* true: HC supports Compliance Transition Capability */
+#define HCC2_CTC(p) ((p) & (1 << 3))
+/* true: HC support Large ESIT payload Capability > 48k */
+#define HCC2_LEC(p) ((p) & (1 << 4))
+/* true: HC support Configuration Information Capability */
+#define HCC2_CIC(p) ((p) & (1 << 5))
+/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */
+#define HCC2_ETC(p) ((p) & (1 << 6))
/* Number of registers per port */
#define NUM_PORT_REGS 4
@@ -269,7 +288,11 @@ struct xhci_op_regs {
/* CONFIG - Configure Register - config_reg bitmasks */
/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
#define MAX_DEVS(p) ((p) & 0xff)
-/* bits 8:31 - reserved and should be preserved */
+/* bit 8: U3 Entry Enabled, assert PLC when root port enters U3, xhci 1.1 */
+#define CONFIG_U3E (1 << 8)
+/* bit 9: Configuration Information Enable, xhci 1.1 */
+#define CONFIG_CIE (1 << 9)
+/* bits 10:31 - reserved and should be preserved */
/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
/* true: device connected */
@@ -306,11 +329,16 @@ struct xhci_op_regs {
#define XDEV_LS (0x2 << 10)
#define XDEV_HS (0x3 << 10)
#define XDEV_SS (0x4 << 10)
+#define XDEV_SSP (0x5 << 10)
#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
+#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP)
+#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS)
+#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f)
+
/* Bits 20:23 in the Slot Context are the speed for the device */
#define SLOT_SPEED_FS (XDEV_FS << 10)
#define SLOT_SPEED_LS (XDEV_LS << 10)
@@ -394,6 +422,9 @@ struct xhci_op_regs {
#define PORT_L1DS(p) (((p) & 0xff) << 8)
#define PORT_HLE (1 << 16)
+/* USB3 Protocol PORTLI Port Link Information */
+#define PORT_RX_LANES(p) (((p) >> 16) & 0xf)
+#define PORT_TX_LANES(p) (((p) >> 20) & 0xf)
/* USB2 Protocol PORTHLPMC */
#define PORT_HIRDM(p)((p) & 3)
@@ -519,9 +550,23 @@ struct xhci_protocol_caps {
};
#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff)
+#define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f)
#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
+#define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f)
+#define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03)
+#define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03)
+#define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01)
+#define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03)
+#define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff)
+
+#define PLT_MASK (0x03 << 6)
+#define PLT_SYM (0x00 << 6)
+#define PLT_ASYM_RX (0x02 << 6)
+#define PLT_ASYM_TX (0x03 << 6)
+
/**
* struct xhci_container_ctx
* @type: Type of context. Used to calculated offsets to contained contexts.
@@ -1136,6 +1181,8 @@ enum xhci_setup_dev {
/* Normal TRB fields */
/* transfer_len bitmasks - bits 0:16 */
#define TRB_LEN(p) ((p) & 0x1ffff)
+/* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31) */
+#define TRB_TD_SIZE(p) (min((p), (u32)31) << 17)
/* Interrupter Target - which MSI-X vector to target the completion event at */
#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
@@ -1448,6 +1495,14 @@ static inline unsigned int hcd_index(struct usb_hcd *hcd)
return 1;
}
+struct xhci_hub {
+ u8 maj_rev;
+ u8 min_rev;
+ u32 *psi; /* array of protocol speed ID entries */
+ u8 psi_count;
+ u8 psi_uid_count;
+};
+
/* There is one xhci_hcd structure per controller */
struct xhci_hcd {
struct usb_hcd *main_hcd;
@@ -1465,6 +1520,7 @@ struct xhci_hcd {
__u32 hcs_params2;
__u32 hcs_params3;
__u32 hcc_params;
+ __u32 hcc_params2;
spinlock_t lock;
@@ -1586,6 +1642,8 @@ struct xhci_hcd {
unsigned int num_usb3_ports;
/* Array of pointers to USB 2.0 PORTSC registers */
__le32 __iomem **usb2_ports;
+ struct xhci_hub usb2_rhub;
+ struct xhci_hub usb3_rhub;
unsigned int num_usb2_ports;
/* support xHCI 0.96 spec USB2 software LPM */
unsigned sw_lpm_support:1;
@@ -1651,20 +1709,12 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
__le64 __iomem *regs)
{
- __u32 __iomem *ptr = (__u32 __iomem *) regs;
- u64 val_lo = readl(ptr);
- u64 val_hi = readl(ptr + 1);
- return val_lo + (val_hi << 32);
+ return lo_hi_readq(regs);
}
static inline void xhci_write_64(struct xhci_hcd *xhci,
const u64 val, __le64 __iomem *regs)
{
- __u32 __iomem *ptr = (__u32 __iomem *) regs;
- u32 val_lo = lower_32_bits(val);
- u32 val_hi = upper_32_bits(val);
-
- writel(val_lo, ptr);
- writel(val_hi, ptr + 1);
+ lo_hi_writeq(val, regs);
}
static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
OpenPOWER on IntegriCloud