summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci.h')
-rw-r--r--drivers/usb/host/xhci.h65
1 files changed, 62 insertions, 3 deletions
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 34a60d9..93d3bf4 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -191,7 +191,7 @@ struct xhci_op_regs {
/* bits 4:6 are reserved (and should be preserved on writes). */
/* light reset (port status stays unchanged) - reset completed when this is 0 */
#define CMD_LRESET (1 << 7)
-/* FIXME: ignoring host controller save/restore state for now. */
+/* host controller save/restore state. */
#define CMD_CSS (1 << 8)
#define CMD_CRS (1 << 9)
/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
@@ -269,6 +269,10 @@ struct xhci_op_regs {
* A read gives the current link PM state of the port,
* a write with Link State Write Strobe set sets the link state.
*/
+#define PORT_PLS_MASK (0xf << 5)
+#define XDEV_U0 (0x0 << 5)
+#define XDEV_U3 (0x3 << 5)
+#define XDEV_RESUME (0xf << 5)
/* true: port has power (see HCC_PPC) */
#define PORT_POWER (1 << 9)
/* bits 10:13 indicate device speed:
@@ -353,6 +357,8 @@ struct xhci_op_regs {
#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
/* Bits 24:31 for port testing */
+/* USB2 Protocol PORTSPMSC */
+#define PORT_RWE (1 << 0x3)
/**
* struct xhci_intr_reg - Interrupt Register Set
@@ -510,6 +516,7 @@ struct xhci_slot_ctx {
#define MAX_EXIT (0xffff)
/* Root hub port number that is needed to access the USB device */
#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
+#define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff)
/* Maximum number of ports under a hub device */
#define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24)
@@ -731,6 +738,7 @@ struct xhci_virt_ep {
};
struct xhci_virt_device {
+ struct usb_device *udev;
/*
* Commands to the hardware are passed an "input context" that
* tells the hardware what to change in its data structures.
@@ -745,12 +753,15 @@ struct xhci_virt_device {
/* Rings saved to ensure old alt settings can be re-instated */
struct xhci_ring **ring_cache;
int num_rings_cached;
+ /* Store xHC assigned device address */
+ int address;
#define XHCI_MAX_RINGS_CACHED 31
struct xhci_virt_ep eps[31];
struct completion cmd_completion;
/* Status of the last command issued for this device */
u32 cmd_status;
struct list_head cmd_list;
+ u8 port;
};
@@ -881,6 +892,10 @@ struct xhci_event_cmd {
#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
+#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23)
+#define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23)
+#define LAST_EP_INDEX 30
+
/* Set TR Dequeue Pointer command TRB fields */
#define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16))
#define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16)
@@ -1115,6 +1130,17 @@ struct urb_priv {
#define XHCI_STOP_EP_CMD_TIMEOUT 5
/* XXX: Make these module parameters */
+struct s3_save {
+ u32 command;
+ u32 dev_nt;
+ u64 dcbaa_ptr;
+ u32 config_reg;
+ u32 irq_pending;
+ u32 irq_control;
+ u32 erst_size;
+ u64 erst_base;
+ u64 erst_dequeue;
+};
/* There is one ehci_hci structure per controller */
struct xhci_hcd {
@@ -1178,6 +1204,12 @@ struct xhci_hcd {
#endif
/* Host controller watchdog timer structures */
unsigned int xhc_state;
+
+ unsigned long bus_suspended;
+ unsigned long next_statechange;
+
+ u32 command;
+ struct s3_save s3;
/* Host controller is dying - not responding to commands. "I'm not dead yet!"
*
* xHC interrupts have been disabled and a watchdog timer will (or has already)
@@ -1199,6 +1231,10 @@ struct xhci_hcd {
#define XHCI_LINK_TRB_QUIRK (1 << 0)
#define XHCI_RESET_EP_QUIRK (1 << 1)
#define XHCI_NEC_HOST (1 << 2)
+ u32 port_c_suspend[8]; /* port suspend change*/
+ u32 suspended_ports[8]; /* which ports are
+ suspended */
+ unsigned long resume_done[MAX_HC_PORTS];
};
/* For testing purposes */
@@ -1369,6 +1405,15 @@ int xhci_init(struct usb_hcd *hcd);
int xhci_run(struct usb_hcd *hcd);
void xhci_stop(struct usb_hcd *hcd);
void xhci_shutdown(struct usb_hcd *hcd);
+
+#ifdef CONFIG_PM
+int xhci_suspend(struct xhci_hcd *xhci);
+int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
+#else
+#define xhci_suspend NULL
+#define xhci_resume NULL
+#endif
+
int xhci_get_frame(struct usb_hcd *hcd);
irqreturn_t xhci_irq(struct usb_hcd *hcd);
irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
@@ -1388,7 +1433,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
-int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
@@ -1406,7 +1451,7 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
int xhci_queue_vendor_command(struct xhci_hcd *xhci,
u32 field1, u32 field2, u32 field3, u32 field4);
int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
- unsigned int ep_index);
+ unsigned int ep_index, int suspend);
int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
int slot_id, unsigned int ep_index);
int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
@@ -1436,12 +1481,26 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state);
void xhci_stop_endpoint_command_watchdog(unsigned long arg);
+void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, unsigned int stream_id);
/* xHCI roothub code */
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+#ifdef CONFIG_PM
+int xhci_bus_suspend(struct usb_hcd *hcd);
+int xhci_bus_resume(struct usb_hcd *hcd);
+#else
+#define xhci_bus_suspend NULL
+#define xhci_bus_resume NULL
+#endif /* CONFIG_PM */
+
+u32 xhci_port_state_to_neutral(u32 state);
+int xhci_find_slot_id_by_port(struct xhci_hcd *xhci, u16 port);
+void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
+
/* xHCI contexts */
struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
OpenPOWER on IntegriCloud