summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci-ring.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-ring.c')
-rw-r--r--drivers/usb/host/xhci-ring.c68
1 files changed, 10 insertions, 58 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a0b248c..0ed64eb 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -307,13 +307,14 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
return 0;
}
- temp_64 = readq(&xhci->op_regs->cmd_ring);
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if (!(temp_64 & CMD_RING_RUNNING)) {
xhci_dbg(xhci, "Command ring had been stopped\n");
return 0;
}
xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
- writeq(temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+ xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+ &xhci->op_regs->cmd_ring);
/* Section 4.6.1.2 of xHCI 1.0 spec says software should
* time the completion od all xHCI commands, including
@@ -2864,8 +2865,9 @@ hw_died:
/* Clear the event handler busy flag (RW1C);
* the event ring should be empty.
*/
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
- writeq(temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB,
+ &xhci->ir_set->erst_dequeue);
spin_unlock(&xhci->lock);
return IRQ_HANDLED;
@@ -2877,7 +2879,7 @@ hw_died:
*/
while (xhci_handle_event(xhci) > 0) {}
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
/* If necessary, update the HW's version of the event ring deq ptr. */
if (event_ring_deq != xhci->event_ring->dequeue) {
deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
@@ -2892,7 +2894,7 @@ hw_died:
/* Clear the event handler busy flag (RW1C); event ring is empty. */
temp_64 |= ERST_EHB;
- writeq(temp_64, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
spin_unlock(&xhci->lock);
@@ -2965,58 +2967,8 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
}
while (1) {
- if (room_on_ring(xhci, ep_ring, num_trbs)) {
- union xhci_trb *trb = ep_ring->enqueue;
- unsigned int usable = ep_ring->enq_seg->trbs +
- TRBS_PER_SEGMENT - 1 - trb;
- u32 nop_cmd;
-
- /*
- * Section 4.11.7.1 TD Fragments states that a link
- * TRB must only occur at the boundary between
- * data bursts (eg 512 bytes for 480M).
- * While it is possible to split a large fragment
- * we don't know the size yet.
- * Simplest solution is to fill the trb before the
- * LINK with nop commands.
- */
- if (num_trbs == 1 || num_trbs <= usable || usable == 0)
- break;
-
- if (ep_ring->type != TYPE_BULK)
- /*
- * While isoc transfers might have a buffer that
- * crosses a 64k boundary it is unlikely.
- * Since we can't add NOPs without generating
- * gaps in the traffic just hope it never
- * happens at the end of the ring.
- * This could be fixed by writing a LINK TRB
- * instead of the first NOP - however the
- * TRB_TYPE_LINK_LE32() calls would all need
- * changing to check the ring length.
- */
- break;
-
- if (num_trbs >= TRBS_PER_SEGMENT) {
- xhci_err(xhci, "Too many fragments %d, max %d\n",
- num_trbs, TRBS_PER_SEGMENT - 1);
- return -EINVAL;
- }
-
- nop_cmd = cpu_to_le32(TRB_TYPE(TRB_TR_NOOP) |
- ep_ring->cycle_state);
- ep_ring->num_trbs_free -= usable;
- do {
- trb->generic.field[0] = 0;
- trb->generic.field[1] = 0;
- trb->generic.field[2] = 0;
- trb->generic.field[3] = nop_cmd;
- trb++;
- } while (--usable);
- ep_ring->enqueue = trb;
- if (room_on_ring(xhci, ep_ring, num_trbs))
- break;
- }
+ if (room_on_ring(xhci, ep_ring, num_trbs))
+ break;
if (ep_ring == xhci->cmd_ring) {
xhci_err(xhci, "Do not support expand command ring\n");
OpenPOWER on IntegriCloud