diff options
Diffstat (limited to 'drivers/usb/host/whci/whci-hc.h')
| -rw-r--r-- | drivers/usb/host/whci/whci-hc.h | 416 |
1 files changed, 416 insertions, 0 deletions
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h new file mode 100644 index 0000000..bff1eb7 --- /dev/null +++ b/drivers/usb/host/whci/whci-hc.h @@ -0,0 +1,416 @@ +/* + * Wireless Host Controller (WHC) data structures. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef _WHCI_WHCI_HC_H +#define _WHCI_WHCI_HC_H + +#include <linux/list.h> + +/** + * WHCI_PAGE_SIZE - page size use by WHCI + * + * WHCI assumes that host system uses pages of 4096 octets. + */ +#define WHCI_PAGE_SIZE 4096 + + +/** + * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single + * qtd. + * + * This is 2^20 - 1. + */ +#define QTD_MAX_XFER_SIZE 1048575 + + +/** + * struct whc_qtd - Queue Element Transfer Descriptors (qTD) + * + * This describes the data for a bulk, control or interrupt transfer. + * + * [WHCI] section 3.2.4 + */ +struct whc_qtd { + __le32 status; /*< remaining transfer len and transfer status */ + __le32 options; + __le64 page_list_ptr; /*< physical pointer to data buffer page list*/ + __u8 setup[8]; /*< setup data for control transfers */ +} __attribute__((packed)); + +#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */ +#define QTD_STS_HALTED (1 << 30) /* transfer halted */ +#define QTD_STS_DBE (1 << 29) /* data buffer error */ +#define QTD_STS_BABBLE (1 << 28) /* babble detected */ +#define QTD_STS_RCE (1 << 27) /* retry count exceeded */ +#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */ +#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */ +#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */ +#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */ +#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */ +#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff) + +#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */ +#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */ + +/** + * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD) + * + * This describes the data and other parameters for an isochronous + * transfer. + * + * [WHCI] section 3.2.5 + */ +struct whc_itd { + __le16 presentation_time; /*< presentation time for OUT transfers */ + __u8 num_segments; /*< number of data segments in segment list */ + __u8 status; /*< command execution status */ + __le32 options; /*< misc transfer options */ + __le64 page_list_ptr; /*< physical pointer to data buffer page list */ + __le64 seg_list_ptr; /*< physical pointer to segment list */ +} __attribute__((packed)); + +#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */ +#define ITD_STS_DBE (1 << 5) /* data buffer error */ +#define ITD_STS_BABBLE (1 << 4) /* babble detected */ +#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */ + +#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */ +#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */ + +/** + * Page list entry. + * + * A TD's page list must contain sufficient page list entries for the + * total data length in the TD. + * + * [WHCI] section 3.2.4.3 + */ +struct whc_page_list_entry { + __le64 buf_ptr; /*< physical pointer to buffer */ +} __attribute__((packed)); + +/** + * struct whc_seg_list_entry - Segment list entry. + * + * Describes a portion of the data buffer described in the containing + * qTD's page list. + * + * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr + * + qtd->seg_list_ptr[seg].offset; + * + * Segments can't cross page boundries. + * + * [WHCI] section 3.2.5.5 + */ +struct whc_seg_list_entry { + __le16 len; /*< segment length */ + __u8 idx; /*< index into page list */ + __u8 status; /*< segment status */ + __le16 offset; /*< 12 bit offset into page */ +} __attribute__((packed)); + +/** + * struct whc_qhead - endpoint and status information for a qset. + * + * [WHCI] section 3.2.6 + */ +struct whc_qhead { + __le64 link; /*< next qset in list */ + __le32 info1; + __le32 info2; + __le32 info3; + __le16 status; + __le16 err_count; /*< transaction error count */ + __le32 cur_window; + __le32 scratch[3]; /*< h/w scratch area */ + union { + struct whc_qtd qtd; + struct whc_itd itd; + } overlay; +} __attribute__((packed)); + +#define QH_LINK_PTR_MASK (~0x03Full) +#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK) +#define QH_LINK_IQS (1 << 4) /* isochronous queue set */ +#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */ +#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */ + +#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */ +#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */ +#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */ +#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */ +#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */ +#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */ +#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */ +#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */ +#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */ +#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */ +#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */ + +#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */ +#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */ +#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */ +#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */ +#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */ +#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */ +#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */ +#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */ + +#define QH_INFO3_TX_RATE_53_3 (0 << 24) +#define QH_INFO3_TX_RATE_80 (1 << 24) +#define QH_INFO3_TX_RATE_106_7 (2 << 24) +#define QH_INFO3_TX_RATE_160 (3 << 24) +#define QH_INFO3_TX_RATE_200 (4 << 24) +#define QH_INFO3_TX_RATE_320 (5 << 24) +#define QH_INFO3_TX_RATE_400 (6 << 24) +#define QH_INFO3_TX_RATE_480 (7 << 24) +#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */ + +#define QH_STATUS_FLOW_CTRL (1 << 15) +#define QH_STATUS_ICUR(i) ((i) << 5) +#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) + +/** + * usb_pipe_to_qh_type - USB core pipe type to QH transfer type + * + * Returns the QH type field for a USB core pipe type. + */ +static inline unsigned usb_pipe_to_qh_type(unsigned pipe) +{ + static const unsigned type[] = { + [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC, + [PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT, + [PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL, + [PIPE_BULK] = QH_INFO1_TR_TYPE_BULK, + }; + return type[usb_pipetype(pipe)]; +} + +/** + * Maxiumum number of TDs in a qset. + */ +#define WHCI_QSET_TD_MAX 8 + +/** + * struct whc_qset - WUSB data transfers to a specific endpoint + * @qh: the QHead of this qset + * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt + * transfers) + * @itd: up to 8 iTDs (for qsets for isochronous transfers) + * @qset_dma: DMA address for this qset + * @whc: WHCI HC this qset is for + * @ep: endpoint + * @stds: list of sTDs queued to this qset + * @ntds: number of qTDs queued (not necessarily the same as nTDs + * field in the QH) + * @td_start: index of the first qTD in the list + * @td_end: index of next free qTD in the list (provided + * ntds < WHCI_QSET_TD_MAX) + * + * Queue Sets (qsets) are added to the asynchronous schedule list + * (ASL) or the periodic zone list (PZL). + * + * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate). + * Each TD may refer to at most 1 MiB of data. If a single transfer + * has > 8MiB of data, TDs can be reused as they are completed since + * the TD list is used as a circular buffer. Similarly, several + * (smaller) transfers may be queued in a qset. + * + * WHCI controllers may cache portions of the qsets in the ASL and + * PZL, requiring the WHCD to inform the WHC that the lists have been + * updated (fields changed or qsets inserted or removed). For safe + * insertion and removal of qsets from the lists the schedule must be + * stopped to avoid races in updating the QH link pointers. + * + * Since the HC is free to execute qsets in any order, all transfers + * to an endpoint should use the same qset to ensure transfers are + * executed in the order they're submitted. + * + * [WHCI] section 3.2.3 + */ +struct whc_qset { + struct whc_qhead qh; + union { + struct whc_qtd qtd[WHCI_QSET_TD_MAX]; + struct whc_itd itd[WHCI_QSET_TD_MAX]; + }; + + /* private data for WHCD */ + dma_addr_t qset_dma; + struct whc *whc; + struct usb_host_endpoint *ep; + struct list_head stds; + int ntds; + int td_start; + int td_end; + struct list_head list_node; + unsigned in_sw_list:1; + unsigned in_hw_list:1; + unsigned remove:1; + struct urb *pause_after_urb; + struct completion remove_complete; + int max_burst; + int max_seq; +}; + +static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target) +{ + if (target) + *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target); + else + *ptr = QH_LINK_T; +} + +/** + * struct di_buf_entry - Device Information (DI) buffer entry. + * + * There's one of these per connected device. + */ +struct di_buf_entry { + __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */ + __le32 addr_sec_info; /*< addressing and security info */ + __le32 reserved[7]; +} __attribute__((packed)); + +#define WHC_DI_SECURE (1 << 31) +#define WHC_DI_DISABLE (1 << 30) +#define WHC_DI_KEY_IDX(k) ((k) << 8) +#define WHC_DI_KEY_IDX_MASK 0x0000ff00 +#define WHC_DI_DEV_ADDR(a) ((a) << 0) +#define WHC_DI_DEV_ADDR_MASK 0x000000ff + +/** + * struct dn_buf_entry - Device Notification (DN) buffer entry. + * + * [WHCI] section 3.2.8 + */ +struct dn_buf_entry { + __u8 msg_size; /*< number of octets of valid DN data */ + __u8 reserved1; + __u8 src_addr; /*< source address */ + __u8 status; /*< buffer entry status */ + __le32 tkid; /*< TKID for source device, valid if secure bit is set */ + __u8 dn_data[56]; /*< up to 56 octets of DN data */ +} __attribute__((packed)); + +#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */ +#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */ + +#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry)) + +/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of + data. [WHCI] section 2.4.7. */ +#define WHC_GEN_CMD_DATA_LEN 256 + +/* + * HC registers. + * + * [WHCI] section 2.4 + */ + +#define WHCIVERSION 0x00 + +#define WHCSPARAMS 0x04 +# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff) +# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff) +# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f) + +#define WUSBCMD 0x08 +# define WUSBCMD_BCID(b) ((b) << 16) +# define WUSBCMD_BCID_MASK (0xff << 16) +# define WUSBCMD_ASYNC_QSET_RM (1 << 12) +# define WUSBCMD_PERIODIC_QSET_RM (1 << 11) +# define WUSBCMD_WUSBSI(s) ((s) << 8) +# define WUSBCMD_WUSBSI_MASK (0x7 << 8) +# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7) +# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6) +# define WUSBCMD_ASYNC_UPDATED (1 << 5) +# define WUSBCMD_PERIODIC_UPDATED (1 << 4) +# define WUSBCMD_ASYNC_EN (1 << 3) +# define WUSBCMD_PERIODIC_EN (1 << 2) +# define WUSBCMD_WHCRESET (1 << 1) +# define WUSBCMD_RUN (1 << 0) + +#define WUSBSTS 0x0c +# define WUSBSTS_ASYNC_SCHED (1 << 15) +# define WUSBSTS_PERIODIC_SCHED (1 << 14) +# define WUSBSTS_DNTS_SCHED (1 << 13) +# define WUSBSTS_HCHALTED (1 << 12) +# define WUSBSTS_GEN_CMD_DONE (1 << 9) +# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8) +# define WUSBSTS_DNTS_OVERFLOW (1 << 7) +# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6) +# define WUSBSTS_HOST_ERR (1 << 5) +# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4) +# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3) +# define WUSBSTS_DNTS_INT (1 << 2) +# define WUSBSTS_ERR_INT (1 << 1) +# define WUSBSTS_INT (1 << 0) +# define WUSBSTS_INT_MASK 0x3ff + +#define WUSBINTR 0x10 +# define WUSBINTR_GEN_CMD_DONE (1 << 9) +# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8) +# define WUSBINTR_DNTS_OVERFLOW (1 << 7) +# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6) +# define WUSBINTR_HOST_ERR (1 << 5) +# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4) +# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3) +# define WUSBINTR_DNTS_INT (1 << 2) +# define WUSBINTR_ERR_INT (1 << 1) +# define WUSBINTR_INT (1 << 0) +# define WUSBINTR_ALL 0x3ff + +#define WUSBGENCMDSTS 0x14 +# define WUSBGENCMDSTS_ACTIVE (1 << 31) +# define WUSBGENCMDSTS_ERROR (1 << 24) +# define WUSBGENCMDSTS_IOC (1 << 23) +# define WUSBGENCMDSTS_MMCIE_ADD 0x01 +# define WUSBGENCMDSTS_MMCIE_RM 0x02 +# define WUSBGENCMDSTS_SET_MAS 0x03 +# define WUSBGENCMDSTS_CHAN_STOP 0x04 +# define WUSBGENCMDSTS_RWP_EN 0x05 + +#define WUSBGENCMDPARAMS 0x18 +#define WUSBGENADDR 0x20 +#define WUSBASYNCLISTADDR 0x28 +#define WUSBDNTSBUFADDR 0x30 +#define WUSBDEVICEINFOADDR 0x38 + +#define WUSBSETSECKEYCMD 0x40 +# define WUSBSETSECKEYCMD_SET (1 << 31) +# define WUSBSETSECKEYCMD_ERASE (1 << 30) +# define WUSBSETSECKEYCMD_GTK (1 << 8) +# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0) + +#define WUSBTKID 0x44 +#define WUSBSECKEY 0x48 +#define WUSBPERIODICLISTBASE 0x58 +#define WUSBMASINDEX 0x60 + +#define WUSBDNTSCTRL 0x64 +# define WUSBDNTSCTRL_ACTIVE (1 << 31) +# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8) +# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0) + +#define WUSBTIME 0x68 +#define WUSBBPST 0x6c +#define WUSBDIBUPDATED 0x70 + +#endif /* #ifndef _WHCI_WHCI_HC_H */ |
