diff options
Diffstat (limited to 'drivers/usb/host/ohci-omap3.c')
| -rw-r--r-- | drivers/usb/host/ohci-omap3.c | 584 |
1 files changed, 48 insertions, 536 deletions
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index a37d599..6048f2f 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -7,6 +7,7 @@ * Copyright (C) 2007-2010 Texas Instruments, Inc. * Author: Vikram Pandita <vikram.pandita@ti.com> * Author: Anand Gadiyar <gadiyar@ti.com> + * Author: Keshava Munegowda <keshava_mgowda@ti.com> * * Based on ehci-omap.c and some other ohci glue layers * @@ -24,150 +25,15 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Mar 10th, 2010): + * TODO (last updated Feb 27, 2011): * - add kernel-doc - * - Factor out code common to EHCI to a separate file - * - Make EHCI and OHCI coexist together - * - needs newer silicon versions to actually work - * - the last one to be loaded currently steps on the other's toes - * - Add hooks for configuring transceivers, etc. at init/exit - * - Add aggressive clock-management code */ #include <linux/platform_device.h> -#include <linux/clk.h> - #include <plat/usb.h> -/* - * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES - * Use ohci_omap_readl()/ohci_omap_writel() functions - */ - -/* TLL Register Set */ -#define OMAP_USBTLL_REVISION (0x00) -#define OMAP_USBTLL_SYSCONFIG (0x10) -#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_USBTLL_SYSSTATUS (0x14) -#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) - -#define OMAP_USBTLL_IRQSTATUS (0x18) -#define OMAP_USBTLL_IRQENABLE (0x1C) - -#define OMAP_TLL_SHARED_CONF (0x30) -#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) -#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) -#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) -#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) -#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) - -#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) -#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 -#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) -#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) -#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) -#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) -#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) -#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) - -#define OMAP_TLL_CHANNEL_COUNT 3 - -/* UHH Register Set */ -#define OMAP_UHH_REVISION (0x00) -#define OMAP_UHH_SYSCONFIG (0x10) -#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) -#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_UHH_SYSSTATUS (0x14) -#define OMAP_UHH_SYSSTATUS_UHHRESETDONE (1 << 0) -#define OMAP_UHH_SYSSTATUS_OHCIRESETDONE (1 << 1) -#define OMAP_UHH_SYSSTATUS_EHCIRESETDONE (1 << 2) -#define OMAP_UHH_HOSTCONFIG (0x40) -#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) -#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) -#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) -#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) -#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) -#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) -#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) -#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) -#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) - -#define OMAP_UHH_DEBUG_CSR (0x44) - /*-------------------------------------------------------------------------*/ -static inline void ohci_omap_writel(void __iomem *base, u32 reg, u32 val) -{ - __raw_writel(val, base + reg); -} - -static inline u32 ohci_omap_readl(void __iomem *base, u32 reg) -{ - return __raw_readl(base + reg); -} - -static inline void ohci_omap_writeb(void __iomem *base, u8 reg, u8 val) -{ - __raw_writeb(val, base + reg); -} - -static inline u8 ohci_omap_readb(void __iomem *base, u8 reg) -{ - return __raw_readb(base + reg); -} - -/*-------------------------------------------------------------------------*/ - -struct ohci_hcd_omap3 { - struct ohci_hcd *ohci; - struct device *dev; - - struct clk *usbhost_ick; - struct clk *usbhost2_120m_fck; - struct clk *usbhost1_48m_fck; - struct clk *usbtll_fck; - struct clk *usbtll_ick; - - /* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */ - enum ohci_omap3_port_mode port_mode[OMAP3_HS_USB_PORTS]; - void __iomem *uhh_base; - void __iomem *tll_base; - void __iomem *ohci_base; - - unsigned es2_compatibility:1; -}; - -/*-------------------------------------------------------------------------*/ - -static void ohci_omap3_clock_power(struct ohci_hcd_omap3 *omap, int on) -{ - if (on) { - clk_enable(omap->usbtll_ick); - clk_enable(omap->usbtll_fck); - clk_enable(omap->usbhost_ick); - clk_enable(omap->usbhost1_48m_fck); - clk_enable(omap->usbhost2_120m_fck); - } else { - clk_disable(omap->usbhost2_120m_fck); - clk_disable(omap->usbhost1_48m_fck); - clk_disable(omap->usbhost_ick); - clk_disable(omap->usbtll_fck); - clk_disable(omap->usbtll_ick); - } -} - static int ohci_omap3_init(struct usb_hcd *hcd) { dev_dbg(hcd->self.controller, "starting OHCI controller\n"); @@ -175,7 +41,6 @@ static int ohci_omap3_init(struct usb_hcd *hcd) return ohci_init(hcd_to_ohci(hcd)); } - /*-------------------------------------------------------------------------*/ static int ohci_omap3_start(struct usb_hcd *hcd) @@ -202,325 +67,6 @@ static int ohci_omap3_start(struct usb_hcd *hcd) /*-------------------------------------------------------------------------*/ -/* - * convert the port-mode enum to a value we can use in the FSLSMODE - * field of USBTLL_CHANNEL_CONF - */ -static unsigned ohci_omap3_fslsmode(enum ohci_omap3_port_mode mode) -{ - switch (mode) { - case OMAP_OHCI_PORT_MODE_UNUSED: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - return 0x0; - - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - return 0x1; - - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - return 0x2; - - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - return 0x3; - - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - return 0x4; - - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - return 0x5; - - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - return 0x6; - - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - return 0x7; - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - return 0xA; - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - return 0xB; - default: - pr_warning("Invalid port mode, using default\n"); - return 0x0; - } -} - -static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap) -{ - u32 reg; - int i; - - /* Program TLL SHARED CONF */ - reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF); - reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; - reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; - reg |= OMAP_TLL_SHARED_CONF_USB_DIVRATION; - reg |= OMAP_TLL_SHARED_CONF_FCLK_IS_ON; - ohci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); - - /* Program each TLL channel */ - /* - * REVISIT: Only the 3-pin and 4-pin PHY modes have - * actually been tested. - */ - for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { - - /* Enable only those channels that are actually used */ - if (omap->port_mode[i] == OMAP_OHCI_PORT_MODE_UNUSED) - continue; - - reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); - reg |= ohci_omap3_fslsmode(omap->port_mode[i]) - << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; - reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; - reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; - ohci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); - } -} - -/* omap3_start_ohci - * - Start the TI USBHOST controller - */ -static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - u32 reg = 0; - int ret = 0; - - dev_dbg(omap->dev, "starting TI OHCI USB Controller\n"); - - /* Get all the clock handles we need */ - omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick"); - if (IS_ERR(omap->usbhost_ick)) { - dev_err(omap->dev, "could not get usbhost_ick\n"); - ret = PTR_ERR(omap->usbhost_ick); - goto err_host_ick; - } - - omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck"); - if (IS_ERR(omap->usbhost2_120m_fck)) { - dev_err(omap->dev, "could not get usbhost_120m_fck\n"); - ret = PTR_ERR(omap->usbhost2_120m_fck); - goto err_host_120m_fck; - } - - omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck"); - if (IS_ERR(omap->usbhost1_48m_fck)) { - dev_err(omap->dev, "could not get usbhost_48m_fck\n"); - ret = PTR_ERR(omap->usbhost1_48m_fck); - goto err_host_48m_fck; - } - - omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck"); - if (IS_ERR(omap->usbtll_fck)) { - dev_err(omap->dev, "could not get usbtll_fck\n"); - ret = PTR_ERR(omap->usbtll_fck); - goto err_tll_fck; - } - - omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick"); - if (IS_ERR(omap->usbtll_ick)) { - dev_err(omap->dev, "could not get usbtll_ick\n"); - ret = PTR_ERR(omap->usbtll_ick); - goto err_tll_ick; - } - - /* Now enable all the clocks in the correct order */ - ohci_omap3_clock_power(omap, 1); - - /* perform TLL soft reset, and wait until reset is complete */ - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_SOFTRESET); - - /* Wait for TLL reset to complete */ - while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_dbg(omap->dev, "operation timed out\n"); - ret = -EINVAL; - goto err_sys_status; - } - } - - dev_dbg(omap->dev, "TLL reset done\n"); - - /* (1<<3) = no idle mode only for initial debugging */ - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | - OMAP_USBTLL_SYSCONFIG_SIDLEMODE | - OMAP_USBTLL_SYSCONFIG_CACTIVITY); - - - /* Put UHH in NoIdle/NoStandby mode */ - reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG); - reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP - | OMAP_UHH_SYSCONFIG_SIDLEMODE - | OMAP_UHH_SYSCONFIG_CACTIVITY - | OMAP_UHH_SYSCONFIG_MIDLEMODE); - reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; - reg &= ~OMAP_UHH_SYSCONFIG_SOFTRESET; - - ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); - - reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); - - /* setup ULPI bypass and burst configurations */ - reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); - reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; - - /* - * REVISIT: Pi_CONNECT_STATUS controls MStandby - * assertion and Swakeup generation - let us not - * worry about this for now. OMAP HWMOD framework - * might take care of this later. If not, we can - * update these registers when adding aggressive - * clock management code. - * - * For now, turn off all the Pi_CONNECT_STATUS bits - * - if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - */ - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - - if (omap->es2_compatibility) { - /* - * All OHCI modes need to go through the TLL, - * unlike in the EHCI case. So use UTMI mode - * for all ports for OHCI, on ES2.x silicon - */ - dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n"); - reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - } else { - dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n"); - if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - - if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - - if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - - } - ohci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); - dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg); - - ohci_omap3_tll_config(omap); - - return 0; - -err_sys_status: - ohci_omap3_clock_power(omap, 0); - clk_put(omap->usbtll_ick); - -err_tll_ick: - clk_put(omap->usbtll_fck); - -err_tll_fck: - clk_put(omap->usbhost1_48m_fck); - -err_host_48m_fck: - clk_put(omap->usbhost2_120m_fck); - -err_host_120m_fck: - clk_put(omap->usbhost_ick); - -err_host_ick: - return ret; -} - -static void omap3_stop_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(100); - - dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n"); - - /* Reset USBHOST for insmod/rmmod to work */ - ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, - OMAP_UHH_SYSCONFIG_SOFTRESET); - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_UHHRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_OHCIRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_EHCIRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); - - while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & (1 << 0))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ohci_omap3_clock_power(omap, 0); - - if (omap->usbtll_fck != NULL) { - clk_put(omap->usbtll_fck); - omap->usbtll_fck = NULL; - } - - if (omap->usbhost_ick != NULL) { - clk_put(omap->usbhost_ick); - omap->usbhost_ick = NULL; - } - - if (omap->usbhost1_48m_fck != NULL) { - clk_put(omap->usbhost1_48m_fck); - omap->usbhost1_48m_fck = NULL; - } - - if (omap->usbhost2_120m_fck != NULL) { - clk_put(omap->usbhost2_120m_fck); - omap->usbhost2_120m_fck = NULL; - } - - if (omap->usbtll_ick != NULL) { - clk_put(omap->usbtll_ick); - omap->usbtll_ick = NULL; - } - - dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); -} - -/*-------------------------------------------------------------------------*/ - static const struct hc_driver ohci_omap3_hc_driver = { .description = hcd_name, .product_desc = "OMAP3 OHCI Host Controller", @@ -580,107 +126,77 @@ static const struct hc_driver ohci_omap3_hc_driver = { */ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev) { - struct ohci_hcd_omap_platform_data *pdata = pdev->dev.platform_data; - struct ohci_hcd_omap3 *omap; - struct resource *res; - struct usb_hcd *hcd; - int ret = -ENODEV; - int irq; + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = NULL; + void __iomem *regs = NULL; + struct resource *res; + int ret = -ENODEV; + int irq; if (usb_disabled()) - goto err_disabled; + goto err_end; - if (!pdata) { - dev_dbg(&pdev->dev, "missing platform_data\n"); - goto err_pdata; + if (!dev->parent) { + dev_err(dev, "Missing parent device\n"); + return -ENODEV; } - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq_byname(pdev, "ohci-irq"); + if (irq < 0) { + dev_err(dev, "OHCI irq failed\n"); + return -ENODEV; + } - omap = kzalloc(sizeof(*omap), GFP_KERNEL); - if (!omap) { - ret = -ENOMEM; - goto err_disabled; + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, "ohci"); + if (!ret) { + dev_err(dev, "UHH OHCI get resource failed\n"); + return -ENOMEM; } - hcd = usb_create_hcd(&ohci_omap3_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) { - ret = -ENOMEM; - goto err_create_hcd; + regs = ioremap(res->start, resource_size(res)); + if (!regs) { + dev_err(dev, "UHH OHCI ioremap failed\n"); + return -ENOMEM; } - platform_set_drvdata(pdev, omap); - omap->dev = &pdev->dev; - omap->port_mode[0] = pdata->port_mode[0]; - omap->port_mode[1] = pdata->port_mode[1]; - omap->port_mode[2] = pdata->port_mode[2]; - omap->es2_compatibility = pdata->es2_compatibility; - omap->ohci = hcd_to_ohci(hcd); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, + dev_name(dev)); + if (!hcd) { + dev_err(dev, "usb_create_hcd failed\n"); + goto err_io; + } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); + hcd->regs = regs; - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "OHCI ioremap failed\n"); - ret = -ENOMEM; - goto err_ioremap; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - omap->uhh_base = ioremap(res->start, resource_size(res)); - if (!omap->uhh_base) { - dev_err(&pdev->dev, "UHH ioremap failed\n"); - ret = -ENOMEM; - goto err_uhh_ioremap; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - omap->tll_base = ioremap(res->start, resource_size(res)); - if (!omap->tll_base) { - dev_err(&pdev->dev, "TLL ioremap failed\n"); - ret = -ENOMEM; - goto err_tll_ioremap; - } - - ret = omap3_start_ohci(omap, hcd); + ret = omap_usbhs_enable(dev); if (ret) { - dev_dbg(&pdev->dev, "failed to start ohci\n"); - goto err_start; + dev_dbg(dev, "failed to start ohci\n"); + goto err_end; } - ohci_hcd_init(omap->ohci); + ohci_hcd_init(hcd_to_ohci(hcd)); ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_dbg(dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } return 0; err_add_hcd: - omap3_stop_ohci(omap, hcd); - -err_start: - iounmap(omap->tll_base); - -err_tll_ioremap: - iounmap(omap->uhh_base); - -err_uhh_ioremap: - iounmap(hcd->regs); + omap_usbhs_disable(dev); -err_ioremap: +err_end: usb_put_hcd(hcd); -err_create_hcd: - kfree(omap); -err_pdata: -err_disabled: +err_io: + iounmap(regs); + return ret; } @@ -699,24 +215,20 @@ err_disabled: */ static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev) { - struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ohci_to_hcd(omap->ohci); + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); - usb_remove_hcd(hcd); - omap3_stop_ohci(omap, hcd); iounmap(hcd->regs); - iounmap(omap->tll_base); - iounmap(omap->uhh_base); + usb_remove_hcd(hcd); + omap_usbhs_disable(dev); usb_put_hcd(hcd); - kfree(omap); return 0; } static void ohci_hcd_omap3_shutdown(struct platform_device *pdev) { - struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ohci_to_hcd(omap->ohci); + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); |
