summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ohci-au1xxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ohci-au1xxx.c')
-rw-r--r--drivers/usb/host/ohci-au1xxx.c102
1 files changed, 87 insertions, 15 deletions
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index db280ca..a1c8b3b 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -23,6 +23,8 @@
#include <asm/mach-au1x00/au1000.h>
+#ifndef CONFIG_SOC_AU1200
+
#define USBH_ENABLE_BE (1<<0)
#define USBH_ENABLE_C (1<<1)
#define USBH_ENABLE_E (1<<2)
@@ -37,21 +39,68 @@
#error not byte order defined
#endif
+#else /* Au1200 */
+
+#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG)
+#define USB_MCFG_PFEN (1<<31)
+#define USB_MCFG_RDCOMB (1<<30)
+#define USB_MCFG_SSDEN (1<<23)
+#define USB_MCFG_OHCCLKEN (1<<16)
+#define USB_MCFG_UCAM (1<<7)
+#define USB_MCFG_OBMEN (1<<1)
+#define USB_MCFG_OMEMEN (1<<0)
+
+#define USBH_ENABLE_CE USB_MCFG_OHCCLKEN
+#ifdef CONFIG_DMA_COHERENT
+#define USBH_ENABLE_INIT (USB_MCFG_OHCCLKEN \
+ | USB_MCFG_PFEN | USB_MCFG_RDCOMB \
+ | USB_MCFG_SSDEN | USB_MCFG_UCAM \
+ | USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
+#else
+#define USBH_ENABLE_INIT (USB_MCFG_OHCCLKEN \
+ | USB_MCFG_PFEN | USB_MCFG_RDCOMB \
+ | USB_MCFG_SSDEN \
+ | USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
+#endif
+#define USBH_DISABLE (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
+
+#endif /* Au1200 */
+
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
-static void au1xxx_start_hc(struct platform_device *dev)
+static void au1xxx_start_ohc(struct platform_device *dev)
{
printk(KERN_DEBUG __FILE__
": starting Au1xxx OHCI USB Controller\n");
/* enable host controller */
+
+#ifndef CONFIG_SOC_AU1200
+
au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
udelay(1000);
au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG);
udelay(1000);
+#else /* Au1200 */
+
+ /* write HW defaults again in case Yamon cleared them */
+ if (au_readl(USB_HOST_CONFIG) == 0) {
+ au_writel(0x00d02000, USB_HOST_CONFIG);
+ au_readl(USB_HOST_CONFIG);
+ udelay(1000);
+ }
+ au_writel(USBH_ENABLE_CE | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
+ au_readl(USB_HOST_CONFIG);
+ udelay(1000);
+ au_writel(USBH_ENABLE_INIT | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
+ au_readl(USB_HOST_CONFIG);
+ udelay(1000);
+
+#endif /* Au1200 */
+
/* wait for reset complete (read register twice; see au1500 errata) */
while (au_readl(USB_HOST_CONFIG),
!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
@@ -61,13 +110,25 @@ static void au1xxx_start_hc(struct platform_device *dev)
": Clock to USB host has been enabled \n");
}
-static void au1xxx_stop_hc(struct platform_device *dev)
+static void au1xxx_stop_ohc(struct platform_device *dev)
{
printk(KERN_DEBUG __FILE__
": stopping Au1xxx OHCI USB Controller\n");
+#ifndef CONFIG_SOC_AU1200
+
/* Disable clock */
au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
+
+#else /* Au1200 */
+
+ /* Disable mem */
+ au_writel(~USBH_DISABLE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
+ udelay(1000);
+ /* Disable clock */
+ au_writel(~USBH_ENABLE_CE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
+ au_readl(USB_HOST_CONFIG);
+#endif /* Au1200 */
}
@@ -78,7 +139,7 @@ static void au1xxx_stop_hc(struct platform_device *dev)
/**
- * usb_hcd_au1xxx_probe - initialize Au1xxx-based HCDs
+ * usb_ohci_au1xxx_probe - initialize Au1xxx-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
@@ -86,14 +147,25 @@ static void au1xxx_stop_hc(struct platform_device *dev)
* through the hotplug entry's driver_data.
*
*/
-int usb_hcd_au1xxx_probe (const struct hc_driver *driver,
+static int usb_ohci_au1xxx_probe(const struct hc_driver *driver,
struct platform_device *dev)
{
int retval;
struct usb_hcd *hcd;
- if(dev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug ("resource[1] is not IORESOURCE_IRQ");
+#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
+ /* Au1200 AB USB does not support coherent memory */
+ if (!(read_c0_prid() & 0xff)) {
+ pr_info("%s: this is chip revision AB !!\n",
+ dev->dev.name);
+ pr_info("%s: update your board or re-configure the kernel\n",
+ dev->dev.name);
+ return -ENODEV;
+ }
+#endif
+
+ if (dev->resource[1].flags != IORESOURCE_IRQ) {
+ pr_debug("resource[1] is not IORESOURCE_IRQ\n");
return -ENOMEM;
}
@@ -104,26 +176,26 @@ int usb_hcd_au1xxx_probe (const struct hc_driver *driver,
hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
- pr_debug("request_mem_region failed");
+ pr_debug("request_mem_region failed\n");
retval = -EBUSY;
goto err1;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
- pr_debug("ioremap failed");
+ pr_debug("ioremap failed\n");
retval = -ENOMEM;
goto err2;
}
- au1xxx_start_hc(dev);
+ au1xxx_start_ohc(dev);
ohci_hcd_init(hcd_to_ohci(hcd));
- retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+ retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT | SA_SHIRQ);
if (retval == 0)
return retval;
- au1xxx_stop_hc(dev);
+ au1xxx_stop_ohc(dev);
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -146,10 +218,10 @@ int usb_hcd_au1xxx_probe (const struct hc_driver *driver,
* context, normally "rmmod", "apmd", or something similar.
*
*/
-void usb_hcd_au1xxx_remove (struct usb_hcd *hcd, struct platform_device *dev)
+static void usb_ohci_au1xxx_remove(struct usb_hcd *hcd, struct platform_device *dev)
{
usb_remove_hcd(hcd);
- au1xxx_stop_hc(dev);
+ au1xxx_stop_ohc(dev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
@@ -235,7 +307,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
if (usb_disabled())
return -ENODEV;
- ret = usb_hcd_au1xxx_probe(&ohci_au1xxx_hc_driver, pdev);
+ ret = usb_ohci_au1xxx_probe(&ohci_au1xxx_hc_driver, pdev);
return ret;
}
@@ -243,7 +315,7 @@ static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
- usb_hcd_au1xxx_remove(hcd, pdev);
+ usb_ohci_au1xxx_remove(hcd, pdev);
return 0;
}
/*TBD*/
OpenPOWER on IntegriCloud