summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/isp116x-hcd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/isp116x-hcd.c')
-rw-r--r--drivers/usb/host/isp116x-hcd.c88
1 files changed, 33 insertions, 55 deletions
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 75128c3..41bbae8 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -83,7 +83,7 @@
#include "../core/hcd.h"
#include "isp116x.h"
-#define DRIVER_VERSION "08 Apr 2005"
+#define DRIVER_VERSION "05 Aug 2005"
#define DRIVER_DESC "ISP116x USB Host Controller Driver"
MODULE_DESCRIPTION(DRIVER_DESC);
@@ -629,14 +629,12 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs)
ERR("Unrecoverable error\n");
/* What should we do here? Reset? */
}
- if (intstat & HCINT_RHSC) {
- isp116x->rhstatus =
- isp116x_read_reg32(isp116x, HCRHSTATUS);
- isp116x->rhport[0] =
- isp116x_read_reg32(isp116x, HCRHPORT1);
- isp116x->rhport[1] =
- isp116x_read_reg32(isp116x, HCRHPORT2);
- }
+ if (intstat & HCINT_RHSC)
+ /* When root hub or any of its ports is going
+ to come out of suspend, it may take more
+ than 10ms for status bits to stabilize. */
+ mod_timer(&hcd->rh_timer, jiffies
+ + msecs_to_jiffies(20) + 1);
if (intstat & HCINT_RD) {
DBG("---- remote wakeup\n");
schedule_work(&isp116x->rh_resume);
@@ -925,20 +923,27 @@ static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
int ports, i, changed = 0;
+ unsigned long flags;
if (!HC_IS_RUNNING(hcd->state))
return -ESHUTDOWN;
- ports = isp116x->rhdesca & RH_A_NDP;
+ /* Report no status change now, if we are scheduled to be
+ called later */
+ if (timer_pending(&hcd->rh_timer))
+ return 0;
- /* init status */
+ ports = isp116x->rhdesca & RH_A_NDP;
+ spin_lock_irqsave(&isp116x->lock, flags);
+ isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
if (isp116x->rhstatus & (RH_HS_LPSC | RH_HS_OCIC))
buf[0] = changed = 1;
else
buf[0] = 0;
for (i = 0; i < ports; i++) {
- u32 status = isp116x->rhport[i];
+ u32 status = isp116x->rhport[i] =
+ isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1);
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
| RH_PS_OCIC | RH_PS_PRSC)) {
@@ -947,6 +952,7 @@ static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf)
continue;
}
}
+ spin_unlock_irqrestore(&isp116x->lock, flags);
return changed;
}
@@ -1463,10 +1469,6 @@ static int isp116x_sw_reset(struct isp116x *isp116x)
return ret;
}
-/*
- Reset. Tries to perform platform-specific hardware
- reset first; falls back to software reset.
-*/
static int isp116x_reset(struct usb_hcd *hcd)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
@@ -1474,17 +1476,7 @@ static int isp116x_reset(struct usb_hcd *hcd)
u16 clkrdy = 0;
int ret = 0, timeout = 15 /* ms */ ;
- if (isp116x->board && isp116x->board->reset) {
- /* Hardware reset */
- isp116x->board->reset(hcd->self.controller, 1);
- msleep(10);
- if (isp116x->board->clock)
- isp116x->board->clock(hcd->self.controller, 1);
- msleep(1);
- isp116x->board->reset(hcd->self.controller, 0);
- } else
- ret = isp116x_sw_reset(isp116x);
-
+ ret = isp116x_sw_reset(isp116x);
if (ret)
return ret;
@@ -1501,10 +1493,7 @@ static int isp116x_reset(struct usb_hcd *hcd)
ERR("Clock not ready after 20ms\n");
/* After sw_reset the clock won't report to be ready, if
H_WAKEUP pin is high. */
- if (!isp116x->board || !isp116x->board->reset)
- ERR("The driver does not support hardware wakeup.\n");
- ERR("Please make sure that the H_WAKEUP pin "
- "is pulled low!\n");
+ ERR("Please make sure that the H_WAKEUP pin is pulled low!\n");
ret = -ENODEV;
}
return ret;
@@ -1527,15 +1516,7 @@ static void isp116x_stop(struct usb_hcd *hcd)
isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
spin_unlock_irqrestore(&isp116x->lock, flags);
- /* Put the chip into reset state */
- if (isp116x->board && isp116x->board->reset)
- isp116x->board->reset(hcd->self.controller, 0);
- else
- isp116x_sw_reset(isp116x);
-
- /* Stop the clock */
- if (isp116x->board && isp116x->board->clock)
- isp116x->board->clock(hcd->self.controller, 0);
+ isp116x_sw_reset(isp116x);
}
/*
@@ -1561,6 +1542,9 @@ static int isp116x_start(struct usb_hcd *hcd)
return -ENODEV;
}
+ /* To be removed in future */
+ hcd->uses_new_polling = 1;
+
isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE);
isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE);
@@ -1569,7 +1553,7 @@ static int isp116x_start(struct usb_hcd *hcd)
if (board->sel15Kres)
val |= HCHWCFG_15KRSEL;
/* Remote wakeup won't work without working clock */
- if (board->clknotstop || board->remote_wakeup_enable)
+ if (board->remote_wakeup_enable)
val |= HCHWCFG_CLKNOTSTOP;
if (board->oc_enable)
val |= HCHWCFG_ANALOG_OC;
@@ -1580,16 +1564,13 @@ static int isp116x_start(struct usb_hcd *hcd)
isp116x_write_reg16(isp116x, HCHWCFG, val);
/* ----- Root hub conf */
- val = 0;
- /* AN10003_1.pdf recommends NPS to be always 1 */
- if (board->no_power_switching)
- val |= RH_A_NPS;
- if (board->power_switching_mode)
- val |= RH_A_PSM;
- if (board->potpg)
- val |= (board->potpg << 24) & RH_A_POTPGT;
- else
- val |= (25 << 24) & RH_A_POTPGT;
+ val = (25 << 24) & RH_A_POTPGT;
+ /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to
+ be always set. Yet, instead, we request individual port
+ power switching. */
+ val |= RH_A_PSM;
+ /* Report overcurrent per port */
+ val |= RH_A_OCPM;
isp116x_write_reg32(isp116x, HCRHDESCA, val);
isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA);
@@ -1619,9 +1600,6 @@ static int isp116x_start(struct usb_hcd *hcd)
/* Go operational */
val = HCCONTROL_USB_OPER;
- /* Remote wakeup connected - NOT SUPPORTED */
- /* if (board->remote_wakeup_connected)
- val |= HCCONTROL_RWC; */
if (board->remote_wakeup_enable)
val |= HCCONTROL_RWE;
isp116x_write_reg32(isp116x, HCCONTROL, val);
@@ -1670,7 +1648,7 @@ static int __init_or_module isp116x_remove(struct device *dev)
struct platform_device *pdev;
struct resource *res;
- if(!hcd)
+ if (!hcd)
return 0;
isp116x = hcd_to_isp116x(hcd);
pdev = container_of(dev, struct platform_device, dev);
OpenPOWER on IntegriCloud