summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/fotg210.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/fotg210.h')
-rw-r--r--drivers/usb/host/fotg210.h750
1 files changed, 0 insertions, 750 deletions
diff --git a/drivers/usb/host/fotg210.h b/drivers/usb/host/fotg210.h
deleted file mode 100644
index 8920f9d..0000000
--- a/drivers/usb/host/fotg210.h
+++ /dev/null
@@ -1,750 +0,0 @@
-#ifndef __LINUX_FOTG210_H
-#define __LINUX_FOTG210_H
-
-/* definitions used for the EHCI driver */
-
-/*
- * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
- * __leXX (normally) or __beXX (given FOTG210_BIG_ENDIAN_DESC), depending on
- * the host controller implementation.
- *
- * To facilitate the strongest possible byte-order checking from "sparse"
- * and so on, we use __leXX unless that's not practical.
- */
-#define __hc32 __le32
-#define __hc16 __le16
-
-/* statistics can be kept for tuning/monitoring */
-struct fotg210_stats {
- /* irq usage */
- unsigned long normal;
- unsigned long error;
- unsigned long iaa;
- unsigned long lost_iaa;
-
- /* termination of urbs from core */
- unsigned long complete;
- unsigned long unlink;
-};
-
-/* fotg210_hcd->lock guards shared data against other CPUs:
- * fotg210_hcd: async, unlink, periodic (and shadow), ...
- * usb_host_endpoint: hcpriv
- * fotg210_qh: qh_next, qtd_list
- * fotg210_qtd: qtd_list
- *
- * Also, hold this lock when talking to HC registers or
- * when updating hw_* fields in shared qh/qtd/... structures.
- */
-
-#define FOTG210_MAX_ROOT_PORTS 1 /* see HCS_N_PORTS */
-
-/*
- * fotg210_rh_state values of FOTG210_RH_RUNNING or above mean that the
- * controller may be doing DMA. Lower values mean there's no DMA.
- */
-enum fotg210_rh_state {
- FOTG210_RH_HALTED,
- FOTG210_RH_SUSPENDED,
- FOTG210_RH_RUNNING,
- FOTG210_RH_STOPPING
-};
-
-/*
- * Timer events, ordered by increasing delay length.
- * Always update event_delays_ns[] and event_handlers[] (defined in
- * ehci-timer.c) in parallel with this list.
- */
-enum fotg210_hrtimer_event {
- FOTG210_HRTIMER_POLL_ASS, /* Poll for async schedule off */
- FOTG210_HRTIMER_POLL_PSS, /* Poll for periodic schedule off */
- FOTG210_HRTIMER_POLL_DEAD, /* Wait for dead controller to stop */
- FOTG210_HRTIMER_UNLINK_INTR, /* Wait for interrupt QH unlink */
- FOTG210_HRTIMER_FREE_ITDS, /* Wait for unused iTDs and siTDs */
- FOTG210_HRTIMER_ASYNC_UNLINKS, /* Unlink empty async QHs */
- FOTG210_HRTIMER_IAA_WATCHDOG, /* Handle lost IAA interrupts */
- FOTG210_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
- FOTG210_HRTIMER_DISABLE_ASYNC, /* Wait to disable async sched */
- FOTG210_HRTIMER_IO_WATCHDOG, /* Check for missing IRQs */
- FOTG210_HRTIMER_NUM_EVENTS /* Must come last */
-};
-#define FOTG210_HRTIMER_NO_EVENT 99
-
-struct fotg210_hcd { /* one per controller */
- /* timing support */
- enum fotg210_hrtimer_event next_hrtimer_event;
- unsigned enabled_hrtimer_events;
- ktime_t hr_timeouts[FOTG210_HRTIMER_NUM_EVENTS];
- struct hrtimer hrtimer;
-
- int PSS_poll_count;
- int ASS_poll_count;
- int died_poll_count;
-
- /* glue to PCI and HCD framework */
- struct fotg210_caps __iomem *caps;
- struct fotg210_regs __iomem *regs;
- struct fotg210_dbg_port __iomem *debug;
-
- __u32 hcs_params; /* cached register copy */
- spinlock_t lock;
- enum fotg210_rh_state rh_state;
-
- /* general schedule support */
- bool scanning:1;
- bool need_rescan:1;
- bool intr_unlinking:1;
- bool async_unlinking:1;
- bool shutdown:1;
- struct fotg210_qh *qh_scan_next;
-
- /* async schedule support */
- struct fotg210_qh *async;
- struct fotg210_qh *dummy; /* For AMD quirk use */
- struct fotg210_qh *async_unlink;
- struct fotg210_qh *async_unlink_last;
- struct fotg210_qh *async_iaa;
- unsigned async_unlink_cycle;
- unsigned async_count; /* async activity count */
-
- /* periodic schedule support */
-#define DEFAULT_I_TDPS 1024 /* some HCs can do less */
- unsigned periodic_size;
- __hc32 *periodic; /* hw periodic table */
- dma_addr_t periodic_dma;
- struct list_head intr_qh_list;
- unsigned i_thresh; /* uframes HC might cache */
-
- union fotg210_shadow *pshadow; /* mirror hw periodic table */
- struct fotg210_qh *intr_unlink;
- struct fotg210_qh *intr_unlink_last;
- unsigned intr_unlink_cycle;
- unsigned now_frame; /* frame from HC hardware */
- unsigned next_frame; /* scan periodic, start here */
- unsigned intr_count; /* intr activity count */
- unsigned isoc_count; /* isoc activity count */
- unsigned periodic_count; /* periodic activity count */
- /* max periodic time per uframe */
- unsigned uframe_periodic_max;
-
-
- /* list of itds completed while now_frame was still active */
- struct list_head cached_itd_list;
- struct fotg210_itd *last_itd_to_free;
-
- /* per root hub port */
- unsigned long reset_done[FOTG210_MAX_ROOT_PORTS];
-
- /* bit vectors (one bit per port) */
- unsigned long bus_suspended; /* which ports were
- already suspended at the start of a bus suspend */
- unsigned long companion_ports; /* which ports are
- dedicated to the companion controller */
- unsigned long owned_ports; /* which ports are
- owned by the companion during a bus suspend */
- unsigned long port_c_suspend; /* which ports have
- the change-suspend feature turned on */
- unsigned long suspended_ports; /* which ports are
- suspended */
- unsigned long resuming_ports; /* which ports have
- started to resume */
-
- /* per-HC memory pools (could be per-bus, but ...) */
- struct dma_pool *qh_pool; /* qh per active urb */
- struct dma_pool *qtd_pool; /* one or more per qh */
- struct dma_pool *itd_pool; /* itd per iso urb */
-
- unsigned random_frame;
- unsigned long next_statechange;
- ktime_t last_periodic_enable;
- u32 command;
-
- /* SILICON QUIRKS */
- unsigned need_io_watchdog:1;
- unsigned fs_i_thresh:1; /* Intel iso scheduling */
-
- u8 sbrn; /* packed release number */
-
- /* irq statistics */
-#ifdef FOTG210_STATS
- struct fotg210_stats stats;
-# define COUNT(x) ((x)++)
-#else
-# define COUNT(x)
-#endif
-
- /* debug files */
-#ifdef DEBUG
- struct dentry *debug_dir;
-#endif
-};
-
-/* convert between an HCD pointer and the corresponding FOTG210_HCD */
-static inline struct fotg210_hcd *hcd_to_fotg210(struct usb_hcd *hcd)
-{
- return (struct fotg210_hcd *)(hcd->hcd_priv);
-}
-static inline struct usb_hcd *fotg210_to_hcd(struct fotg210_hcd *fotg210)
-{
- return container_of((void *) fotg210, struct usb_hcd, hcd_priv);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct fotg210_caps {
- /* these fields are specified as 8 and 16 bit registers,
- * but some hosts can't perform 8 or 16 bit PCI accesses.
- * some hosts treat caplength and hciversion as parts of a 32-bit
- * register, others treat them as two separate registers, this
- * affects the memory map for big endian controllers.
- */
- u32 hc_capbase;
-#define HC_LENGTH(fotg210, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
- (fotg210_big_endian_capbase(fotg210) ? 24 : 0)))
-#define HC_VERSION(fotg210, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \
- (fotg210_big_endian_capbase(fotg210) ? 0 : 16)))
- u32 hcs_params; /* HCSPARAMS - offset 0x4 */
-#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
-
- u32 hcc_params; /* HCCPARAMS - offset 0x8 */
-#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
- u8 portroute[8]; /* nibbles for routing - offset 0xC */
-};
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct fotg210_regs {
-
- /* USBCMD: offset 0x00 */
- u32 command;
-
-/* EHCI 1.1 addendum */
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK (1<<11) /* enable "park" on async qh */
-#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
-#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
-#define CMD_ASE (1<<5) /* async schedule enable */
-#define CMD_PSE (1<<4) /* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET (1<<1) /* reset HC not bus */
-#define CMD_RUN (1<<0) /* start/stop HC */
-
- /* USBSTS: offset 0x04 */
- u32 status;
-#define STS_ASS (1<<15) /* Async Schedule Status */
-#define STS_PSS (1<<14) /* Periodic Schedule Status */
-#define STS_RECL (1<<13) /* Reclamation */
-#define STS_HALT (1<<12) /* Not running (any reason) */
-/* some bits reserved */
- /* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA (1<<5) /* Interrupted on async advance */
-#define STS_FATAL (1<<4) /* such as some PCI access errors */
-#define STS_FLR (1<<3) /* frame list rolled over */
-#define STS_PCD (1<<2) /* port change detect */
-#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
-#define STS_INT (1<<0) /* "normal" completion (short, ...) */
-
- /* USBINTR: offset 0x08 */
- u32 intr_enable;
-
- /* FRINDEX: offset 0x0C */
- u32 frame_index; /* current microframe number */
- /* CTRLDSSEGMENT: offset 0x10 */
- u32 segment; /* address bits 63:32 if needed */
- /* PERIODICLISTBASE: offset 0x14 */
- u32 frame_list; /* points to periodic list */
- /* ASYNCLISTADDR: offset 0x18 */
- u32 async_next; /* address of next async queue head */
-
- u32 reserved1;
- /* PORTSC: offset 0x20 */
- u32 port_status;
-/* 31:23 reserved */
-#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
-#define PORT_RESET (1<<8) /* reset port */
-#define PORT_SUSPEND (1<<7) /* suspend port */
-#define PORT_RESUME (1<<6) /* resume it */
-#define PORT_PEC (1<<3) /* port enable change */
-#define PORT_PE (1<<2) /* port enable */
-#define PORT_CSC (1<<1) /* connect status change */
-#define PORT_CONNECT (1<<0) /* device connected */
-#define PORT_RWC_BITS (PORT_CSC | PORT_PEC)
- u32 reserved2[19];
-
- /* OTGCSR: offet 0x70 */
- u32 otgcsr;
-#define OTGCSR_HOST_SPD_TYP (3 << 22)
-#define OTGCSR_A_BUS_DROP (1 << 5)
-#define OTGCSR_A_BUS_REQ (1 << 4)
-
- /* OTGISR: offset 0x74 */
- u32 otgisr;
-#define OTGISR_OVC (1 << 10)
-
- u32 reserved3[15];
-
- /* GMIR: offset 0xB4 */
- u32 gmir;
-#define GMIR_INT_POLARITY (1 << 3) /*Active High*/
-#define GMIR_MHC_INT (1 << 2)
-#define GMIR_MOTG_INT (1 << 1)
-#define GMIR_MDEV_INT (1 << 0)
-};
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console. (nonstandard enumeration.)
- */
-struct fotg210_dbg_port {
- u32 control;
-#define DBGP_OWNER (1<<30)
-#define DBGP_ENABLED (1<<28)
-#define DBGP_DONE (1<<16)
-#define DBGP_INUSE (1<<10)
-#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
-# define DBGP_ERR_BAD 1
-# define DBGP_ERR_SIGNAL 2
-#define DBGP_ERROR (1<<6)
-#define DBGP_GO (1<<5)
-#define DBGP_OUT (1<<4)
-#define DBGP_LEN(x) (((x)>>0)&0x0f)
- u32 pids;
-#define DBGP_PID_GET(x) (((x)>>16)&0xff)
-#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
- u32 data03;
- u32 data47;
- u32 address;
-#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
-};
-
-#ifdef CONFIG_EARLY_PRINTK_DBGP
-#include <linux/init.h>
-extern int __init early_dbgp_init(char *s);
-extern struct console early_dbgp_console;
-#endif /* CONFIG_EARLY_PRINTK_DBGP */
-
-struct usb_hcd;
-
-static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd)
-{
- return 1; /* Shouldn't this be 0? */
-}
-
-static inline int xen_dbgp_external_startup(struct usb_hcd *hcd)
-{
- return -1;
-}
-
-#ifdef CONFIG_EARLY_PRINTK_DBGP
-/* Call backs from fotg210 host driver to fotg210 debug driver */
-extern int dbgp_external_startup(struct usb_hcd *);
-extern int dbgp_reset_prep(struct usb_hcd *hcd);
-#else
-static inline int dbgp_reset_prep(struct usb_hcd *hcd)
-{
- return xen_dbgp_reset_prep(hcd);
-}
-static inline int dbgp_external_startup(struct usb_hcd *hcd)
-{
- return xen_dbgp_external_startup(hcd);
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#define QTD_NEXT(fotg210, dma) cpu_to_hc32(fotg210, (u32)dma)
-
-/*
- * EHCI Specification 0.95 Section 3.5
- * QTD: describe data transfer components (buffer, direction, ...)
- * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
- *
- * These are associated only with "QH" (Queue Head) structures,
- * used with control, bulk, and interrupt transfers.
- */
-struct fotg210_qtd {
- /* first part defined by EHCI spec */
- __hc32 hw_next; /* see EHCI 3.5.1 */
- __hc32 hw_alt_next; /* see EHCI 3.5.2 */
- __hc32 hw_token; /* see EHCI 3.5.3 */
-#define QTD_TOGGLE (1 << 31) /* data toggle */
-#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
-#define QTD_IOC (1 << 15) /* interrupt on complete */
-#define QTD_CERR(tok) (((tok)>>10) & 0x3)
-#define QTD_PID(tok) (((tok)>>8) & 0x3)
-#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
-#define QTD_STS_HALT (1 << 6) /* halted on error */
-#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
-#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
-#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
-#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
-#define QTD_STS_STS (1 << 1) /* split transaction state */
-#define QTD_STS_PING (1 << 0) /* issue PING? */
-
-#define ACTIVE_BIT(fotg210) cpu_to_hc32(fotg210, QTD_STS_ACTIVE)
-#define HALT_BIT(fotg210) cpu_to_hc32(fotg210, QTD_STS_HALT)
-#define STATUS_BIT(fotg210) cpu_to_hc32(fotg210, QTD_STS_STS)
-
- __hc32 hw_buf[5]; /* see EHCI 3.5.4 */
- __hc32 hw_buf_hi[5]; /* Appendix B */
-
- /* the rest is HCD-private */
- dma_addr_t qtd_dma; /* qtd address */
- struct list_head qtd_list; /* sw qtd list */
- struct urb *urb; /* qtd's urb */
- size_t length; /* length of buffer */
-} __aligned(32);
-
-/* mask NakCnt+T in qh->hw_alt_next */
-#define QTD_MASK(fotg210) cpu_to_hc32(fotg210, ~0x1f)
-
-#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
-
-/*-------------------------------------------------------------------------*/
-
-/* type tag from {qh,itd,fstn}->hw_next */
-#define Q_NEXT_TYPE(fotg210, dma) ((dma) & cpu_to_hc32(fotg210, 3 << 1))
-
-/*
- * Now the following defines are not converted using the
- * cpu_to_le32() macro anymore, since we have to support
- * "dynamic" switching between be and le support, so that the driver
- * can be used on one system with SoC EHCI controller using big-endian
- * descriptors as well as a normal little-endian PCI EHCI controller.
- */
-/* values for that type tag */
-#define Q_TYPE_ITD (0 << 1)
-#define Q_TYPE_QH (1 << 1)
-#define Q_TYPE_SITD (2 << 1)
-#define Q_TYPE_FSTN (3 << 1)
-
-/* next async queue entry, or pointer to interrupt/periodic QH */
-#define QH_NEXT(fotg210, dma) \
- (cpu_to_hc32(fotg210, (((u32)dma)&~0x01f)|Q_TYPE_QH))
-
-/* for periodic/async schedules and qtd lists, mark end of list */
-#define FOTG210_LIST_END(fotg210) \
- cpu_to_hc32(fotg210, 1) /* "null pointer" to hw */
-
-/*
- * Entries in periodic shadow table are pointers to one of four kinds
- * of data structure. That's dictated by the hardware; a type tag is
- * encoded in the low bits of the hardware's periodic schedule. Use
- * Q_NEXT_TYPE to get the tag.
- *
- * For entries in the async schedule, the type tag always says "qh".
- */
-union fotg210_shadow {
- struct fotg210_qh *qh; /* Q_TYPE_QH */
- struct fotg210_itd *itd; /* Q_TYPE_ITD */
- struct fotg210_fstn *fstn; /* Q_TYPE_FSTN */
- __hc32 *hw_next; /* (all types) */
- void *ptr;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * EHCI Specification 0.95 Section 3.6
- * QH: describes control/bulk/interrupt endpoints
- * See Fig 3-7 "Queue Head Structure Layout".
- *
- * These appear in both the async and (for interrupt) periodic schedules.
- */
-
-/* first part defined by EHCI spec */
-struct fotg210_qh_hw {
- __hc32 hw_next; /* see EHCI 3.6.1 */
- __hc32 hw_info1; /* see EHCI 3.6.2 */
-#define QH_CONTROL_EP (1 << 27) /* FS/LS control endpoint */
-#define QH_HEAD (1 << 15) /* Head of async reclamation list */
-#define QH_TOGGLE_CTL (1 << 14) /* Data toggle control */
-#define QH_HIGH_SPEED (2 << 12) /* Endpoint speed */
-#define QH_LOW_SPEED (1 << 12)
-#define QH_FULL_SPEED (0 << 12)
-#define QH_INACTIVATE (1 << 7) /* Inactivate on next transaction */
- __hc32 hw_info2; /* see EHCI 3.6.2 */
-#define QH_SMASK 0x000000ff
-#define QH_CMASK 0x0000ff00
-#define QH_HUBADDR 0x007f0000
-#define QH_HUBPORT 0x3f800000
-#define QH_MULT 0xc0000000
- __hc32 hw_current; /* qtd list - see EHCI 3.6.4 */
-
- /* qtd overlay (hardware parts of a struct fotg210_qtd) */
- __hc32 hw_qtd_next;
- __hc32 hw_alt_next;
- __hc32 hw_token;
- __hc32 hw_buf[5];
- __hc32 hw_buf_hi[5];
-} __aligned(32);
-
-struct fotg210_qh {
- struct fotg210_qh_hw *hw; /* Must come first */
- /* the rest is HCD-private */
- dma_addr_t qh_dma; /* address of qh */
- union fotg210_shadow qh_next; /* ptr to qh; or periodic */
- struct list_head qtd_list; /* sw qtd list */
- struct list_head intr_node; /* list of intr QHs */
- struct fotg210_qtd *dummy;
- struct fotg210_qh *unlink_next; /* next on unlink list */
-
- unsigned unlink_cycle;
-
- u8 needs_rescan; /* Dequeue during giveback */
- u8 qh_state;
-#define QH_STATE_LINKED 1 /* HC sees this */
-#define QH_STATE_UNLINK 2 /* HC may still see this */
-#define QH_STATE_IDLE 3 /* HC doesn't see this */
-#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on unlink q */
-#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
-
- u8 xacterrs; /* XactErr retry counter */
-#define QH_XACTERR_MAX 32 /* XactErr retry limit */
-
- /* periodic schedule info */
- u8 usecs; /* intr bandwidth */
- u8 gap_uf; /* uframes split/csplit gap */
- u8 c_usecs; /* ... split completion bw */
- u16 tt_usecs; /* tt downstream bandwidth */
- unsigned short period; /* polling interval */
- unsigned short start; /* where polling starts */
-#define NO_FRAME ((unsigned short)~0) /* pick new start */
-
- struct usb_device *dev; /* access to TT */
- unsigned is_out:1; /* bulk or intr OUT */
- unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* description of one iso transaction (up to 3 KB data if highspeed) */
-struct fotg210_iso_packet {
- /* These will be copied to iTD when scheduling */
- u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
- __hc32 transaction; /* itd->hw_transaction[i] |= */
- u8 cross; /* buf crosses pages */
- /* for full speed OUT splits */
- u32 buf1;
-};
-
-/* temporary schedule data for packets from iso urbs (both speeds)
- * each packet is one logical usb transaction to the device (not TT),
- * beginning at stream->next_uframe
- */
-struct fotg210_iso_sched {
- struct list_head td_list;
- unsigned span;
- struct fotg210_iso_packet packet[0];
-};
-
-/*
- * fotg210_iso_stream - groups all (s)itds for this endpoint.
- * acts like a qh would, if EHCI had them for ISO.
- */
-struct fotg210_iso_stream {
- /* first field matches fotg210_hq, but is NULL */
- struct fotg210_qh_hw *hw;
-
- u8 bEndpointAddress;
- u8 highspeed;
- struct list_head td_list; /* queued itds */
- struct list_head free_list; /* list of unused itds */
- struct usb_device *udev;
- struct usb_host_endpoint *ep;
-
- /* output of (re)scheduling */
- int next_uframe;
- __hc32 splits;
-
- /* the rest is derived from the endpoint descriptor,
- * trusting urb->interval == f(epdesc->bInterval) and
- * including the extra info for hw_bufp[0..2]
- */
- u8 usecs, c_usecs;
- u16 interval;
- u16 tt_usecs;
- u16 maxp;
- u16 raw_mask;
- unsigned bandwidth;
-
- /* This is used to initialize iTD's hw_bufp fields */
- __hc32 buf0;
- __hc32 buf1;
- __hc32 buf2;
-
- /* this is used to initialize sITD's tt info */
- __hc32 address;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * EHCI Specification 0.95 Section 3.3
- * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
- *
- * Schedule records for high speed iso xfers
- */
-struct fotg210_itd {
- /* first part defined by EHCI spec */
- __hc32 hw_next; /* see EHCI 3.3.1 */
- __hc32 hw_transaction[8]; /* see EHCI 3.3.2 */
-#define FOTG210_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
-#define FOTG210_ISOC_BUF_ERR (1<<30) /* Data buffer error */
-#define FOTG210_ISOC_BABBLE (1<<29) /* babble detected */
-#define FOTG210_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
-#define FOTG210_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
-#define FOTG210_ITD_IOC (1 << 15) /* interrupt on complete */
-
-#define ITD_ACTIVE(fotg210) cpu_to_hc32(fotg210, FOTG210_ISOC_ACTIVE)
-
- __hc32 hw_bufp[7]; /* see EHCI 3.3.3 */
- __hc32 hw_bufp_hi[7]; /* Appendix B */
-
- /* the rest is HCD-private */
- dma_addr_t itd_dma; /* for this itd */
- union fotg210_shadow itd_next; /* ptr to periodic q entry */
-
- struct urb *urb;
- struct fotg210_iso_stream *stream; /* endpoint's queue */
- struct list_head itd_list; /* list of stream's itds */
-
- /* any/all hw_transactions here may be used by that urb */
- unsigned frame; /* where scheduled */
- unsigned pg;
- unsigned index[8]; /* in urb->iso_frame_desc */
-} __aligned(32);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * EHCI Specification 0.96 Section 3.7
- * Periodic Frame Span Traversal Node (FSTN)
- *
- * Manages split interrupt transactions (using TT) that span frame boundaries
- * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
- * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
- * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
- */
-struct fotg210_fstn {
- __hc32 hw_next; /* any periodic q entry */
- __hc32 hw_prev; /* qh or FOTG210_LIST_END */
-
- /* the rest is HCD-private */
- dma_addr_t fstn_dma;
- union fotg210_shadow fstn_next; /* ptr to periodic q entry */
-} __aligned(32);
-
-/*-------------------------------------------------------------------------*/
-
-/* Prepare the PORTSC wakeup flags during controller suspend/resume */
-
-#define fotg210_prepare_ports_for_controller_suspend(fotg210, do_wakeup) \
- fotg210_adjust_port_wakeup_flags(fotg210, true, do_wakeup);
-
-#define fotg210_prepare_ports_for_controller_resume(fotg210) \
- fotg210_adjust_port_wakeup_flags(fotg210, false, false);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Some EHCI controllers have a Transaction Translator built into the
- * root hub. This is a non-standard feature. Each controller will need
- * to add code to the following inline functions, and call them as
- * needed (mostly in root hub code).
- */
-
-static inline unsigned int
-fotg210_get_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
-{
- return (readl(&fotg210->regs->otgcsr)
- & OTGCSR_HOST_SPD_TYP) >> 22;
-}
-
-/* Returns the speed of a device attached to a port on the root hub. */
-static inline unsigned int
-fotg210_port_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
-{
- switch (fotg210_get_speed(fotg210, portsc)) {
- case 0:
- return 0;
- case 1:
- return USB_PORT_STAT_LOW_SPEED;
- case 2:
- default:
- return USB_PORT_STAT_HIGH_SPEED;
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-#define fotg210_has_fsl_portno_bug(e) (0)
-
-/*
- * While most USB host controllers implement their registers in
- * little-endian format, a minority (celleb companion chip) implement
- * them in big endian format.
- *
- * This attempts to support either format at compile time without a
- * runtime penalty, or both formats with the additional overhead
- * of checking a flag bit.
- *
- */
-
-#define fotg210_big_endian_mmio(e) 0
-#define fotg210_big_endian_capbase(e) 0
-
-static inline unsigned int fotg210_readl(const struct fotg210_hcd *fotg210,
- __u32 __iomem *regs)
-{
- return readl(regs);
-}
-
-static inline void fotg210_writel(const struct fotg210_hcd *fotg210,
- const unsigned int val, __u32 __iomem *regs)
-{
- writel(val, regs);
-}
-
-/* cpu to fotg210 */
-static inline __hc32 cpu_to_hc32(const struct fotg210_hcd *fotg210, const u32 x)
-{
- return cpu_to_le32(x);
-}
-
-/* fotg210 to cpu */
-static inline u32 hc32_to_cpu(const struct fotg210_hcd *fotg210, const __hc32 x)
-{
- return le32_to_cpu(x);
-}
-
-static inline u32 hc32_to_cpup(const struct fotg210_hcd *fotg210,
- const __hc32 *x)
-{
- return le32_to_cpup(x);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline unsigned fotg210_read_frame_index(struct fotg210_hcd *fotg210)
-{
- return fotg210_readl(fotg210, &fotg210->regs->frame_index);
-}
-
-#define fotg210_itdlen(urb, desc, t) ({ \
- usb_pipein((urb)->pipe) ? \
- (desc)->length - FOTG210_ITD_LENGTH(t) : \
- FOTG210_ITD_LENGTH(t); \
-})
-/*-------------------------------------------------------------------------*/
-
-#ifndef DEBUG
-#define STUB_DEBUG_FILES
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*/
-
-#endif /* __LINUX_FOTG210_H */
OpenPOWER on IntegriCloud