summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ehci-hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-hub.c')
-rw-r--r--drivers/usb/host/ehci-hub.c25
1 files changed, 21 insertions, 4 deletions
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index e7d3d8d..796ea0c 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
}
static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
- bool suspending)
+ bool suspending, bool do_wakeup)
{
int port;
u32 temp;
@@ -117,8 +117,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
* when the controller is suspended or resumed. In all other
* cases they don't need to be changed.
*/
- if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup ||
- device_may_wakeup(ehci_to_hcd(ehci)->self.controller))
+ if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
return;
/* clear phy low-power mode before changing wakeup flags */
@@ -167,6 +166,10 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
}
}
+
+ /* Does the root hub have a port wakeup pending? */
+ if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
+ usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
}
static int ehci_bus_suspend (struct usb_hcd *hcd)
@@ -316,7 +319,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
spin_lock_irq (&ehci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
spin_unlock_irq(&ehci->lock);
return -ESHUTDOWN;
}
@@ -603,6 +606,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
u32 mask;
int ports, i, retval = 1;
unsigned long flags;
+ u32 ppcd = 0;
/* if !USB_SUSPEND, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
@@ -632,7 +636,15 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
/* port N changes (bit N)? */
spin_lock_irqsave (&ehci->lock, flags);
+
+ /* get per-port change detect bits */
+ if (ehci->has_ppcd)
+ ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
+
for (i = 0; i < ports; i++) {
+ /* leverage per-port change bits feature */
+ if (ehci->has_ppcd && !(ppcd & (1 << i)))
+ continue;
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
/*
@@ -790,6 +802,11 @@ static int ehci_hub_control (
status_reg);
break;
case USB_PORT_FEAT_C_CONNECTION:
+ if (ehci->has_lpm) {
+ /* clear PORTSC bits on disconnect */
+ temp &= ~PORT_LPM;
+ temp &= ~PORT_DEV_ADDR;
+ }
ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
status_reg);
break;
OpenPOWER on IntegriCloud