diff options
Diffstat (limited to 'drivers/usb/host/ehci-hcd.c')
| -rw-r--r-- | drivers/usb/host/ehci-hcd.c | 512 |
1 files changed, 226 insertions, 286 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 1d9401e..b05c686 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -30,8 +30,7 @@ #include <linux/vmalloc.h> #include <linux/errno.h> #include <linux/init.h> -#include <linux/timer.h> -#include <linux/ktime.h> +#include <linux/hrtimer.h> #include <linux/list.h> #include <linux/interrupt.h> #include <linux/usb.h> @@ -94,12 +93,6 @@ static const char hcd_name [] = "ehci_hcd"; */ #define EHCI_TUNE_FLS 1 /* (medium) 512-frame schedule */ -#define EHCI_IAA_MSECS 10 /* arbitrary */ -#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ -#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ -#define EHCI_SHRINK_JIFFIES (DIV_ROUND_UP(HZ, 200) + 1) - /* 5-ms async qh unlink delay */ - /* Initial IRQ latency: faster than hw default */ static int log2_irq_thresh = 0; // 0 to 6 module_param (log2_irq_thresh, int, S_IRUGO); @@ -130,41 +123,6 @@ MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us"); /*-------------------------------------------------------------------------*/ -static void -timer_action(struct ehci_hcd *ehci, enum ehci_timer_action action) -{ - /* Don't override timeouts which shrink or (later) disable - * the async ring; just the I/O watchdog. Note that if a - * SHRINK were pending, OFF would never be requested. - */ - if (timer_pending(&ehci->watchdog) - && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) - & ehci->actions)) - return; - - if (!test_and_set_bit(action, &ehci->actions)) { - unsigned long t; - - switch (action) { - case TIMER_IO_WATCHDOG: - if (!ehci->need_io_watchdog) - return; - t = EHCI_IO_JIFFIES; - break; - case TIMER_ASYNC_OFF: - t = EHCI_ASYNC_JIFFIES; - break; - /* case TIMER_ASYNC_SHRINK: */ - default: - t = EHCI_SHRINK_JIFFIES; - break; - } - mod_timer(&ehci->watchdog, t + jiffies); - } -} - -/*-------------------------------------------------------------------------*/ - /* * handshake - spin reading hc until handshake completes or fails * @ptr: address of hc register to be read @@ -203,29 +161,30 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr, /* check TDI/ARC silicon is in host mode */ static int tdi_in_host_mode (struct ehci_hcd *ehci) { - u32 __iomem *reg_ptr; u32 tmp; - reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE); - tmp = ehci_readl(ehci, reg_ptr); + tmp = ehci_readl(ehci, &ehci->regs->usbmode); return (tmp & 3) == USBMODE_CM_HC; } -/* force HC to halt state from unknown (EHCI spec section 2.3) */ +/* + * Force HC to halt state from unknown (EHCI spec section 2.3). + * Must be called with interrupts enabled and the lock not held. + */ static int ehci_halt (struct ehci_hcd *ehci) { - u32 temp = ehci_readl(ehci, &ehci->regs->status); + u32 temp; + + spin_lock_irq(&ehci->lock); /* disable any irqs left enabled by previous code */ ehci_writel(ehci, 0, &ehci->regs->intr_enable); - if (ehci_is_TDI(ehci) && tdi_in_host_mode(ehci) == 0) { + if (ehci_is_TDI(ehci) && !tdi_in_host_mode(ehci)) { + spin_unlock_irq(&ehci->lock); return 0; } - if ((temp & STS_HALT) != 0) - return 0; - /* * This routine gets called during probe before ehci->command * has been initialized, so we can't rely on its value. @@ -234,80 +193,20 @@ static int ehci_halt (struct ehci_hcd *ehci) temp = ehci_readl(ehci, &ehci->regs->command); temp &= ~(CMD_RUN | CMD_IAAD); ehci_writel(ehci, temp, &ehci->regs->command); - return handshake (ehci, &ehci->regs->status, - STS_HALT, STS_HALT, 16 * 125); -} - -#if defined(CONFIG_USB_SUSPEND) && defined(CONFIG_PPC_PS3) - -/* - * The EHCI controller of the Cell Super Companion Chip used in the - * PS3 will stop the root hub after all root hub ports are suspended. - * When in this condition handshake will return -ETIMEDOUT. The - * STS_HLT bit will not be set, so inspection of the frame index is - * used here to test for the condition. If the condition is found - * return success to allow the USB suspend to complete. - */ - -static int handshake_for_broken_root_hub(struct ehci_hcd *ehci, - void __iomem *ptr, u32 mask, u32 done, - int usec) -{ - unsigned int old_index; - int error; - - if (!firmware_has_feature(FW_FEATURE_PS3_LV1)) - return -ETIMEDOUT; - - old_index = ehci_read_frame_index(ehci); - - error = handshake(ehci, ptr, mask, done, usec); - - if (error == -ETIMEDOUT && ehci_read_frame_index(ehci) == old_index) - return 0; - - return error; -} - -#else - -static int handshake_for_broken_root_hub(struct ehci_hcd *ehci, - void __iomem *ptr, u32 mask, u32 done, - int usec) -{ - return -ETIMEDOUT; -} - -#endif -static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, - u32 mask, u32 done, int usec) -{ - int error; - - error = handshake(ehci, ptr, mask, done, usec); - if (error == -ETIMEDOUT) - error = handshake_for_broken_root_hub(ehci, ptr, mask, done, - usec); - - if (error) { - ehci_halt(ehci); - ehci->rh_state = EHCI_RH_HALTED; - ehci_err(ehci, "force halt; handshake %p %08x %08x -> %d\n", - ptr, mask, done, error); - } + spin_unlock_irq(&ehci->lock); + synchronize_irq(ehci_to_hcd(ehci)->irq); - return error; + return handshake(ehci, &ehci->regs->status, + STS_HALT, STS_HALT, 16 * 125); } /* put TDI/ARC silicon into EHCI mode */ static void tdi_reset (struct ehci_hcd *ehci) { - u32 __iomem *reg_ptr; u32 tmp; - reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE); - tmp = ehci_readl(ehci, reg_ptr); + tmp = ehci_readl(ehci, &ehci->regs->usbmode); tmp |= USBMODE_CM_HC; /* The default byte access to MMR space is LE after * controller reset. Set the required endian mode @@ -315,10 +214,13 @@ static void tdi_reset (struct ehci_hcd *ehci) */ if (ehci_big_endian_mmio(ehci)) tmp |= USBMODE_BE; - ehci_writel(ehci, tmp, reg_ptr); + ehci_writel(ehci, tmp, &ehci->regs->usbmode); } -/* reset a non-running (STS_HALT == 1) controller */ +/* + * Reset a non-running (STS_HALT == 1) controller. + * Must be called with interrupts enabled and the lock not held. + */ static int ehci_reset (struct ehci_hcd *ehci) { int retval; @@ -339,9 +241,8 @@ static int ehci_reset (struct ehci_hcd *ehci) if (ehci->has_hostpc) { ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS, - (u32 __iomem *)(((u8 *)ehci->regs) + USBMODE_EX)); - ehci_writel(ehci, TXFIFO_DEFAULT, - (u32 __iomem *)(((u8 *)ehci->regs) + TXFILLTUNING)); + &ehci->regs->usbmode_ex); + ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning); } if (retval) return retval; @@ -357,36 +258,40 @@ static int ehci_reset (struct ehci_hcd *ehci) return retval; } -/* idle the controller (from running) */ +/* + * Idle the controller (turn off the schedules). + * Must be called with interrupts enabled and the lock not held. + */ static void ehci_quiesce (struct ehci_hcd *ehci) { u32 temp; -#ifdef DEBUG if (ehci->rh_state != EHCI_RH_RUNNING) - BUG (); -#endif + return; /* wait for any schedule enables/disables to take effect */ temp = (ehci->command << 10) & (STS_ASS | STS_PSS); - if (handshake_on_error_set_halt(ehci, &ehci->regs->status, - STS_ASS | STS_PSS, temp, 16 * 125)) - return; + handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp, 16 * 125); /* then disable anything that's still active */ + spin_lock_irq(&ehci->lock); ehci->command &= ~(CMD_ASE | CMD_PSE); ehci_writel(ehci, ehci->command, &ehci->regs->command); + spin_unlock_irq(&ehci->lock); /* hardware can take 16 microframes to turn off ... */ - handshake_on_error_set_halt(ehci, &ehci->regs->status, - STS_ASS | STS_PSS, 0, 16 * 125); + handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, 0, 16 * 125); } /*-------------------------------------------------------------------------*/ static void end_unlink_async(struct ehci_hcd *ehci); +static void unlink_empty_async(struct ehci_hcd *ehci); static void ehci_work(struct ehci_hcd *ehci); +static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh); +static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh); +#include "ehci-timer.c" #include "ehci-hub.c" #include "ehci-lpm.c" #include "ehci-mem.c" @@ -396,68 +301,6 @@ static void ehci_work(struct ehci_hcd *ehci); /*-------------------------------------------------------------------------*/ -static void ehci_iaa_watchdog(unsigned long param) -{ - struct ehci_hcd *ehci = (struct ehci_hcd *) param; - unsigned long flags; - - spin_lock_irqsave (&ehci->lock, flags); - - /* Lost IAA irqs wedge things badly; seen first with a vt8235. - * So we need this watchdog, but must protect it against both - * (a) SMP races against real IAA firing and retriggering, and - * (b) clean HC shutdown, when IAA watchdog was pending. - */ - if (ehci->reclaim - && !timer_pending(&ehci->iaa_watchdog) - && ehci->rh_state == EHCI_RH_RUNNING) { - u32 cmd, status; - - /* If we get here, IAA is *REALLY* late. It's barely - * conceivable that the system is so busy that CMD_IAAD - * is still legitimately set, so let's be sure it's - * clear before we read STS_IAA. (The HC should clear - * CMD_IAAD when it sets STS_IAA.) - */ - cmd = ehci_readl(ehci, &ehci->regs->command); - - /* If IAA is set here it either legitimately triggered - * before we cleared IAAD above (but _way_ late, so we'll - * still count it as lost) ... or a silicon erratum: - * - VIA seems to set IAA without triggering the IRQ; - * - IAAD potentially cleared without setting IAA. - */ - status = ehci_readl(ehci, &ehci->regs->status); - if ((status & STS_IAA) || !(cmd & CMD_IAAD)) { - COUNT (ehci->stats.lost_iaa); - ehci_writel(ehci, STS_IAA, &ehci->regs->status); - } - - ehci_vdbg(ehci, "IAA watchdog: status %x cmd %x\n", - status, cmd); - end_unlink_async(ehci); - } - - spin_unlock_irqrestore(&ehci->lock, flags); -} - -static void ehci_watchdog(unsigned long param) -{ - struct ehci_hcd *ehci = (struct ehci_hcd *) param; - unsigned long flags; - - spin_lock_irqsave(&ehci->lock, flags); - - /* stop async processing after it's idled a bit */ - if (test_bit (TIMER_ASYNC_OFF, &ehci->actions)) - start_unlink_async (ehci, ehci->async); - - /* ehci could run by timer, without IRQs ... */ - ehci_work (ehci); - - spin_unlock_irqrestore (&ehci->lock, flags); -} - /* On some systems, leaving remote wakeup enabled prevents system shutdown. * The firmware seems to think that powering off is a wakeup event! * This routine turns off remote wakeup and everything else, on all ports. @@ -473,11 +316,14 @@ static void ehci_turn_off_all_ports(struct ehci_hcd *ehci) /* * Halt HC, turn off all ports, and let the BIOS use the companion controllers. - * Should be called with ehci->lock held. + * Must be called with interrupts enabled and the lock not held. */ static void ehci_silence_controller(struct ehci_hcd *ehci) { ehci_halt(ehci); + + spin_lock_irq(&ehci->lock); + ehci->rh_state = EHCI_RH_HALTED; ehci_turn_off_all_ports(ehci); /* make BIOS/etc use companion controller during reboot */ @@ -485,6 +331,7 @@ static void ehci_silence_controller(struct ehci_hcd *ehci) /* unblock posted writes */ ehci_readl(ehci, &ehci->regs->configured_flag); + spin_unlock_irq(&ehci->lock); } /* ehci_shutdown kick in for silicon on any bus (not just pci, etc). @@ -495,12 +342,15 @@ static void ehci_shutdown(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - del_timer_sync(&ehci->watchdog); - del_timer_sync(&ehci->iaa_watchdog); - spin_lock_irq(&ehci->lock); - ehci_silence_controller(ehci); + ehci->shutdown = true; + ehci->rh_state = EHCI_RH_STOPPING; + ehci->enabled_hrtimer_events = 0; spin_unlock_irq(&ehci->lock); + + ehci_silence_controller(ehci); + + hrtimer_cancel(&ehci->hrtimer); } static void ehci_port_power (struct ehci_hcd *ehci, int is_on) @@ -529,28 +379,33 @@ static void ehci_port_power (struct ehci_hcd *ehci, int is_on) */ static void ehci_work (struct ehci_hcd *ehci) { - timer_action_done (ehci, TIMER_IO_WATCHDOG); - /* another CPU may drop ehci->lock during a schedule scan while * it reports urb completions. this flag guards against bogus * attempts at re-entrant schedule scanning. */ - if (ehci->scanning) + if (ehci->scanning) { + ehci->need_rescan = true; return; - ehci->scanning = 1; - scan_async (ehci); - if (ehci->next_uframe != -1) - scan_periodic (ehci); - ehci->scanning = 0; + } + ehci->scanning = true; + + rescan: + ehci->need_rescan = false; + if (ehci->async_count) + scan_async(ehci); + if (ehci->intr_count > 0) + scan_intr(ehci); + if (ehci->isoc_count > 0) + scan_isoc(ehci); + if (ehci->need_rescan) + goto rescan; + ehci->scanning = false; /* the IO watchdog guards against hardware or driver bugs that * misplace IRQs, and should let us run completely without IRQs. * such lossage has been observed on both VT6202 and VT8235. */ - if (ehci->rh_state == EHCI_RH_RUNNING && - (ehci->async->qh_next.ptr != NULL || - ehci->periodic_sched != 0)) - timer_action (ehci, TIMER_IO_WATCHDOG); + turn_on_io_watchdog(ehci); } /* @@ -563,24 +418,22 @@ static void ehci_stop (struct usb_hcd *hcd) ehci_dbg (ehci, "stop\n"); /* no more interrupts ... */ - del_timer_sync (&ehci->watchdog); - del_timer_sync(&ehci->iaa_watchdog); spin_lock_irq(&ehci->lock); - if (ehci->rh_state == EHCI_RH_RUNNING) - ehci_quiesce (ehci); + ehci->enabled_hrtimer_events = 0; + spin_unlock_irq(&ehci->lock); + ehci_quiesce(ehci); ehci_silence_controller(ehci); ehci_reset (ehci); - spin_unlock_irq(&ehci->lock); + hrtimer_cancel(&ehci->hrtimer); remove_sysfs_files(ehci); remove_debug_files (ehci); /* root hub is shut down separately (first, when possible) */ spin_lock_irq (&ehci->lock); - if (ehci->async) - ehci_work (ehci); + end_free_itds(ehci); spin_unlock_irq (&ehci->lock); ehci_mem_cleanup (ehci); @@ -588,8 +441,8 @@ static void ehci_stop (struct usb_hcd *hcd) usb_amd_dev_put(); #ifdef EHCI_STATS - ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", - ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim, + ehci_dbg(ehci, "irq normal %ld err %ld iaa %ld (lost %ld)\n", + ehci->stats.normal, ehci->stats.error, ehci->stats.iaa, ehci->stats.lost_iaa); ehci_dbg (ehci, "complete %ld unlink %ld\n", ehci->stats.complete, ehci->stats.unlink); @@ -614,13 +467,10 @@ static int ehci_init(struct usb_hcd *hcd) * keep io watchdog by default, those good HCDs could turn off it later */ ehci->need_io_watchdog = 1; - init_timer(&ehci->watchdog); - ehci->watchdog.function = ehci_watchdog; - ehci->watchdog.data = (unsigned long) ehci; - init_timer(&ehci->iaa_watchdog); - ehci->iaa_watchdog.function = ehci_iaa_watchdog; - ehci->iaa_watchdog.data = (unsigned long) ehci; + hrtimer_init(&ehci->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); + ehci->hrtimer.function = ehci_hrtimer_func; + ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT; hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); @@ -635,6 +485,7 @@ static int ehci_init(struct usb_hcd *hcd) * periodic_size can shrink by USBCMD update if hcc_params allows. */ ehci->periodic_size = DEFAULT_I_TDPS; + INIT_LIST_HEAD(&ehci->intr_qh_list); INIT_LIST_HEAD(&ehci->cached_itd_list); INIT_LIST_HEAD(&ehci->cached_sitd_list); @@ -656,10 +507,6 @@ static int ehci_init(struct usb_hcd *hcd) else // N microframes cached ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params); - ehci->reclaim = NULL; - ehci->next_uframe = -1; - ehci->clock_frame = -1; - /* * dedicate a qh for the async ring head, since we couldn't unlink * a 'real' qh without stopping the async schedule [4.8]. use it @@ -672,7 +519,7 @@ static int ehci_init(struct usb_hcd *hcd) hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma); hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD); #if defined(CONFIG_PPC_PS3) - hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */ + hw->hw_info1 |= cpu_to_hc32(ehci, QH_INACTIVATE); #endif hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT); hw->hw_qtd_next = EHCI_LIST_END(ehci); @@ -813,7 +660,7 @@ static int ehci_run (struct usb_hcd *hcd) return 0; } -static int __maybe_unused ehci_setup (struct usb_hcd *hcd) +static int ehci_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; @@ -828,15 +675,18 @@ static int __maybe_unused ehci_setup (struct usb_hcd *hcd) ehci->sbrn = HCD_USB2; - retval = ehci_halt(ehci); + /* data structure init */ + retval = ehci_init(hcd); if (retval) return retval; - /* data structure init */ - retval = ehci_init(hcd); + retval = ehci_halt(ehci); if (retval) return retval; + if (ehci_is_TDI(ehci)) + tdi_reset(ehci); + ehci_reset(ehci); return 0; @@ -895,14 +745,28 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* complete the unlinking of some qh [4.15.2.3] */ if (status & STS_IAA) { + + /* Turn off the IAA watchdog */ + ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_IAA_WATCHDOG); + + /* + * Mild optimization: Allow another IAAD to reset the + * hrtimer, if one occurs before the next expiration. + * In theory we could always cancel the hrtimer, but + * tests show that about half the time it will be reset + * for some other event anyway. + */ + if (ehci->next_hrtimer_event == EHCI_HRTIMER_IAA_WATCHDOG) + ++ehci->next_hrtimer_event; + /* guard against (alleged) silicon errata */ if (cmd & CMD_IAAD) ehci_dbg(ehci, "IAA with IAAD still set?\n"); - if (ehci->reclaim) { - COUNT(ehci->stats.reclaim); + if (ehci->async_iaa) { + COUNT(ehci->stats.iaa); end_unlink_async(ehci); } else - ehci_dbg(ehci, "IAA with nothing to reclaim?\n"); + ehci_dbg(ehci, "IAA with nothing unlinked?\n"); } /* remote wakeup [4.3.1] */ @@ -956,15 +820,19 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) ehci_err(ehci, "fatal error\n"); dbg_cmd(ehci, "fatal", cmd); dbg_status(ehci, "fatal", status); - ehci_halt(ehci); dead: - ehci_reset(ehci); - ehci_writel(ehci, 0, &ehci->regs->configured_flag); usb_hc_died(hcd); - /* generic layer kills/unlinks all urbs, then - * uses ehci_stop to clean up the rest - */ - bh = 1; + + /* Don't let the controller do anything more */ + ehci->shutdown = true; + ehci->rh_state = EHCI_RH_STOPPING; + ehci->command &= ~(CMD_RUN | CMD_ASE | CMD_PSE); + ehci_writel(ehci, ehci->command, &ehci->regs->command); + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + ehci_handle_controller_death(ehci); + + /* Handle completions when the controller stops */ + bh = 0; } if (bh) @@ -1026,38 +894,6 @@ static int ehci_urb_enqueue ( } } -static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) -{ - /* failfast */ - if (ehci->rh_state != EHCI_RH_RUNNING && ehci->reclaim) - end_unlink_async(ehci); - - /* If the QH isn't linked then there's nothing we can do - * unless we were called during a giveback, in which case - * qh_completions() has to deal with it. - */ - if (qh->qh_state != QH_STATE_LINKED) { - if (qh->qh_state == QH_STATE_COMPLETING) - qh->needs_rescan = 1; - return; - } - - /* defer till later if busy */ - if (ehci->reclaim) { - struct ehci_qh *last; - - for (last = ehci->reclaim; - last->reclaim; - last = last->reclaim) - continue; - qh->qh_state = QH_STATE_UNLINK_WAIT; - last->reclaim = qh; - - /* start IAA cycle */ - } else - start_unlink_async (ehci, qh); -} - /* remove from hardware lists * completions normally happen asynchronously */ @@ -1084,7 +920,7 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) switch (qh->qh_state) { case QH_STATE_LINKED: case QH_STATE_COMPLETING: - unlink_async(ehci, qh); + start_unlink_async(ehci, qh); break; case QH_STATE_UNLINK: case QH_STATE_UNLINK_WAIT: @@ -1104,7 +940,7 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) switch (qh->qh_state) { case QH_STATE_LINKED: case QH_STATE_COMPLETING: - intr_deschedule (ehci, qh); + start_unlink_intr(ehci, qh); break; case QH_STATE_IDLE: qh_completions (ehci, qh); @@ -1152,11 +988,17 @@ rescan: * accelerate iso completions ... so spin a while. */ if (qh->hw == NULL) { - ehci_vdbg (ehci, "iso delay\n"); - goto idle_timeout; + struct ehci_iso_stream *stream = ep->hcpriv; + + if (!list_empty(&stream->td_list)) + goto idle_timeout; + + /* BUG_ON(!list_empty(&stream->free_list)); */ + kfree(stream); + goto done; } - if (ehci->rh_state != EHCI_RH_RUNNING) + if (ehci->rh_state < EHCI_RH_RUNNING) qh->qh_state = QH_STATE_IDLE; switch (qh->qh_state) { case QH_STATE_LINKED: @@ -1169,7 +1011,7 @@ rescan: * may already be unlinked. */ if (tmp) - unlink_async(ehci, qh); + start_unlink_async(ehci, qh); /* FALL THROUGH */ case QH_STATE_UNLINK: /* wait for hw to finish? */ case QH_STATE_UNLINK_WAIT: @@ -1181,7 +1023,7 @@ idle_timeout: if (qh->clearing_tt) goto idle_timeout; if (list_empty (&qh->qtd_list)) { - qh_put (qh); + qh_destroy(ehci, qh); break; } /* else FALL THROUGH */ @@ -1194,8 +1036,8 @@ idle_timeout: list_empty (&qh->qtd_list) ? "" : "(has tds)"); break; } + done: ep->hcpriv = NULL; -done: spin_unlock_irqrestore (&ehci->lock, flags); } @@ -1232,9 +1074,9 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) * re-linking will call qh_refresh(). */ if (eptype == USB_ENDPOINT_XFER_BULK) - unlink_async(ehci, qh); + start_unlink_async(ehci, qh); else - intr_deschedule(ehci, qh); + start_unlink_intr(ehci, qh); } } spin_unlock_irqrestore(&ehci->lock, flags); @@ -1247,6 +1089,104 @@ static int ehci_get_frame (struct usb_hcd *hcd) } /*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +/* suspend/resume, section 4.3 */ + +/* These routines handle the generic parts of controller suspend/resume */ + +static int __maybe_unused ehci_suspend(struct usb_hcd *hcd, bool do_wakeup) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + if (time_before(jiffies, ehci->next_statechange)) + msleep(10); + + /* + * Root hub was already suspended. Disable IRQ emission and + * mark HW unaccessible. The PM and USB cores make sure that + * the root hub is either suspended or stopped. + */ + ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); + + spin_lock_irq(&ehci->lock); + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + (void) ehci_readl(ehci, &ehci->regs->intr_enable); + + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + spin_unlock_irq(&ehci->lock); + + return 0; +} + +/* Returns 0 if power was preserved, 1 if power was lost */ +static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + if (time_before(jiffies, ehci->next_statechange)) + msleep(100); + + /* Mark hardware accessible again as we are back to full power by now */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + if (ehci->shutdown) + return 0; /* Controller is dead */ + + /* + * If CF is still set and we aren't resuming from hibernation + * then we maintained suspend power. + * Just undo the effect of ehci_suspend(). + */ + if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF && + !hibernated) { + int mask = INTR_MASK; + + ehci_prepare_ports_for_controller_resume(ehci); + + spin_lock_irq(&ehci->lock); + if (ehci->shutdown) + goto skip; + + if (!hcd->self.root_hub->do_remote_wakeup) + mask &= ~STS_PCD; + ehci_writel(ehci, mask, &ehci->regs->intr_enable); + ehci_readl(ehci, &ehci->regs->intr_enable); + skip: + spin_unlock_irq(&ehci->lock); + return 0; + } + + /* + * Else reset, to cope with power loss or resume from hibernation + * having let the firmware kick in during reboot. + */ + usb_root_hub_lost_power(hcd->self.root_hub); + (void) ehci_halt(ehci); + (void) ehci_reset(ehci); + + spin_lock_irq(&ehci->lock); + if (ehci->shutdown) + goto skip; + + ehci_writel(ehci, ehci->command, &ehci->regs->command); + ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ + + ehci->rh_state = EHCI_RH_SUSPENDED; + spin_unlock_irq(&ehci->lock); + + /* here we "know" root ports should always stay powered */ + ehci_port_power(ehci, 1); + + return 1; +} + +#endif + +/*-------------------------------------------------------------------------*/ + /* * The EHCI in ChipIdea HDRC cannot be a separate module or device, * because its registers (and irq) are shared between host/gadget/otg |
