summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/zero.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/zero.c')
-rw-r--r--drivers/usb/gadget/zero.c1162
1 files changed, 94 insertions, 1068 deletions
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index fce4924..aa0bd4f 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1,8 +1,8 @@
/*
* zero.c -- Gadget Zero, for USB development
*
- * Copyright (C) 2003-2007 David Brownell
- * All rights reserved.
+ * Copyright (C) 2003-2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -30,12 +30,7 @@
*
* It supports two similar configurations. One sinks whatever the usb host
* writes, and in return sources zeroes. The other loops whatever the host
- * writes back, so the host can read it. Module options include:
- *
- * buflen=N default N=4096, buffer size used
- * qlen=N default N=32, how many buffers in the loopback queue
- * loopdefault default false, list loopback config first
- * autoresume=N default N=0, seconds before triggering remote wakeup
+ * writes back, so the host can read it.
*
* Many drivers will only have one configuration, letting them be much
* simpler if they also don't support high speed operation (like this
@@ -47,94 +42,35 @@
* work with low capability USB controllers without four bulk endpoints.
*/
+/*
+ * driver assumes self-powered hardware, and
+ * has no way for users to trigger remote wakeup.
+ */
+
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
#include <linux/utsname.h>
#include <linux/device.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
+#include "g_zero.h"
#include "gadget_chips.h"
/*-------------------------------------------------------------------------*/
-#define DRIVER_VERSION "Earth Day 2008"
+#define DRIVER_VERSION "Cinco de Mayo 2008"
-static const char shortname[] = "zero";
static const char longname[] = "Gadget Zero";
-static const char source_sink[] = "source and sink data";
-static const char loopback[] = "loop input to output";
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * driver assumes self-powered hardware, and
- * has no way for users to trigger remote wakeup.
- *
- * this version autoconfigures as much as possible,
- * which is reasonable for most "bulk-only" drivers.
- */
-static const char *EP_IN_NAME; /* source */
-static const char *EP_OUT_NAME; /* sink */
-
-/*-------------------------------------------------------------------------*/
-
-/* big enough to hold our biggest descriptor */
-#define USB_BUFSIZ 256
-
-struct zero_dev {
- spinlock_t lock;
- struct usb_gadget *gadget;
- struct usb_request *req; /* for control responses */
-
- /* when configured, we have one of two configs:
- * - source data (in to host) and sink it (out from host)
- * - or loop it back (out from host back in to host)
- */
- u8 config;
- struct usb_ep *in_ep, *out_ep;
-
- /* autoresume timer */
- struct timer_list resume;
-};
-
-#define DBG(d, fmt, args...) \
- dev_dbg(&(d)->gadget->dev , fmt , ## args)
-#define VDBG(d, fmt, args...) \
- dev_vdbg(&(d)->gadget->dev , fmt , ## args)
-#define ERROR(d, fmt, args...) \
- dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
- dev_warn(&(d)->gadget->dev , fmt , ## args)
-#define INFO(d, fmt, args...) \
- dev_info(&(d)->gadget->dev , fmt , ## args)
-
-/*-------------------------------------------------------------------------*/
-
-static unsigned buflen = 4096;
-static unsigned qlen = 32;
-static unsigned pattern = 0;
-
-module_param(buflen, uint, S_IRUGO);
-module_param(qlen, uint, S_IRUGO);
-module_param(pattern, uint, S_IRUGO|S_IWUSR);
-
-/*
- * if it's nonzero, autoresume says how many seconds to wait
- * before trying to wake up the host after suspend.
- */
-static unsigned autoresume = 0;
-module_param(autoresume, uint, 0);
+unsigned buflen = 4096;
+module_param(buflen, uint, 0);
/*
* Normally the "loopback" configuration is second (index 1) so
* it's not the default. Here's where to change that order, to
- * work better with hosts where config changes are problematic.
- * Or controllers (like superh) that only support one config.
+ * work better with hosts where config changes are problematic or
+ * controllers (like original superh) that only support one config.
*/
static int loopdefault = 0;
module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
@@ -156,24 +92,6 @@ module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
/*-------------------------------------------------------------------------*/
-/*
- * DESCRIPTORS ... most are static, but strings and (full)
- * configuration descriptors are built on demand.
- */
-
-#define STRING_MANUFACTURER 25
-#define STRING_PRODUCT 42
-#define STRING_SERIAL 101
-#define STRING_SOURCE_SINK 250
-#define STRING_LOOPBACK 251
-
-/*
- * This device advertises two configurations; these numbers work
- * on a pxa250 as well as more flexible hardware.
- */
-#define CONFIG_SOURCE_SINK 3
-#define CONFIG_LOOPBACK 2
-
static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
@@ -183,248 +101,64 @@ static struct usb_device_descriptor device_desc = {
.idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM),
.idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
- .iManufacturer = STRING_MANUFACTURER,
- .iProduct = STRING_PRODUCT,
- .iSerialNumber = STRING_SERIAL,
.bNumConfigurations = 2,
};
-static struct usb_config_descriptor source_sink_config = {
- .bLength = sizeof source_sink_config,
- .bDescriptorType = USB_DT_CONFIG,
-
- /* compute wTotalLength on the fly */
- .bNumInterfaces = 1,
- .bConfigurationValue = CONFIG_SOURCE_SINK,
- .iConfiguration = STRING_SOURCE_SINK,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, /* self-powered */
-};
-
-static struct usb_config_descriptor loopback_config = {
- .bLength = sizeof loopback_config,
- .bDescriptorType = USB_DT_CONFIG,
-
- /* compute wTotalLength on the fly */
- .bNumInterfaces = 1,
- .bConfigurationValue = CONFIG_LOOPBACK,
- .iConfiguration = STRING_LOOPBACK,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, /* self-powered */
-};
-
+#ifdef CONFIG_USB_OTG
static struct usb_otg_descriptor otg_descriptor = {
.bLength = sizeof otg_descriptor,
.bDescriptorType = USB_DT_OTG,
- .bmAttributes = USB_OTG_SRP,
-};
-
-/* one interface in each configuration */
-
-static const struct usb_interface_descriptor source_sink_intf = {
- .bLength = sizeof source_sink_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
- .iInterface = STRING_SOURCE_SINK,
-};
-
-static const struct usb_interface_descriptor loopback_intf = {
- .bLength = sizeof loopback_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
- .iInterface = STRING_LOOPBACK,
-};
-
-/* two full speed bulk endpoints; their use is config-dependent */
-
-static struct usb_endpoint_descriptor fs_source_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usb_endpoint_descriptor fs_sink_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_OUT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
-};
-
-static const struct usb_descriptor_header *fs_source_sink_function[] = {
- (struct usb_descriptor_header *) &otg_descriptor,
- (struct usb_descriptor_header *) &source_sink_intf,
- (struct usb_descriptor_header *) &fs_sink_desc,
- (struct usb_descriptor_header *) &fs_source_desc,
- NULL,
-};
-
-static const struct usb_descriptor_header *fs_loopback_function[] = {
- (struct usb_descriptor_header *) &otg_descriptor,
- (struct usb_descriptor_header *) &loopback_intf,
- (struct usb_descriptor_header *) &fs_sink_desc,
- (struct usb_descriptor_header *) &fs_source_desc,
- NULL,
-};
-
-/*
- * usb 2.0 devices need to expose both high speed and full speed
- * descriptors, unless they only run at full speed.
- *
- * that means alternate endpoint descriptors (bigger packets)
- * and a "device qualifier" ... plus more construction options
- * for the config descriptor.
- */
-
-static struct usb_endpoint_descriptor hs_source_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16(512),
-};
-
-static struct usb_endpoint_descriptor hs_sink_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16(512),
-};
-
-static struct usb_qualifier_descriptor dev_qualifier = {
- .bLength = sizeof dev_qualifier,
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-
- .bcdUSB = __constant_cpu_to_le16(0x0200),
- .bDeviceClass = USB_CLASS_VENDOR_SPEC,
-
- .bNumConfigurations = 2,
+ /* REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
};
-static const struct usb_descriptor_header *hs_source_sink_function[] = {
+const struct usb_descriptor_header *otg_desc[] = {
(struct usb_descriptor_header *) &otg_descriptor,
- (struct usb_descriptor_header *) &source_sink_intf,
- (struct usb_descriptor_header *) &hs_source_desc,
- (struct usb_descriptor_header *) &hs_sink_desc,
NULL,
};
+#endif
-static const struct usb_descriptor_header *hs_loopback_function[] = {
- (struct usb_descriptor_header *) &otg_descriptor,
- (struct usb_descriptor_header *) &loopback_intf,
- (struct usb_descriptor_header *) &hs_source_desc,
- (struct usb_descriptor_header *) &hs_sink_desc,
- NULL,
-};
+/* string IDs are assigned dynamically */
-/* maxpacket and other transfer characteristics vary by speed. */
-static inline struct usb_endpoint_descriptor *
-ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
- struct usb_endpoint_descriptor *fs)
-{
- if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
- return hs;
- return fs;
-}
+#define STRING_MANUFACTURER_IDX 0
+#define STRING_PRODUCT_IDX 1
+#define STRING_SERIAL_IDX 2
static char manufacturer[50];
/* default serial number takes at least two packets */
static char serial[] = "0123456789.0123456789.0123456789";
-
-/* static strings, in UTF-8 */
-static struct usb_string strings[] = {
- { STRING_MANUFACTURER, manufacturer, },
- { STRING_PRODUCT, longname, },
- { STRING_SERIAL, serial, },
- { STRING_LOOPBACK, loopback, },
- { STRING_SOURCE_SINK, source_sink, },
+static struct usb_string strings_dev[] = {
+ [STRING_MANUFACTURER_IDX].s = manufacturer,
+ [STRING_PRODUCT_IDX].s = longname,
+ [STRING_SERIAL_IDX].s = serial,
{ } /* end of list */
};
-static struct usb_gadget_strings stringtab = {
+static struct usb_gadget_strings stringtab_dev = {
.language = 0x0409, /* en-us */
- .strings = strings,
+ .strings = strings_dev,
};
-/*
- * config descriptors are also handcrafted. these must agree with code
- * that sets configurations, and with code managing interfaces and their
- * altsettings. other complexity may come from:
- *
- * - high speed support, including "other speed config" rules
- * - multiple configurations
- * - interfaces with alternate settings
- * - embedded class or vendor-specific descriptors
- *
- * this handles high speed, and has a second config that could as easily
- * have been an alternate interface setting (on most hardware).
- *
- * NOTE: to demonstrate (and test) more USB capabilities, this driver
- * should include an altsetting to test interrupt transfers, including
- * high bandwidth modes at high speed. (Maybe work like Intel's test
- * device?)
- */
-static int config_buf(struct usb_gadget *gadget,
- u8 *buf, u8 type, unsigned index)
-{
- int is_source_sink;
- int len;
- const struct usb_descriptor_header **function;
- int hs = 0;
-
- /* two configurations will always be index 0 and index 1 */
- if (index > 1)
- return -EINVAL;
- is_source_sink = loopdefault ? (index == 1) : (index == 0);
-
- if (gadget_is_dualspeed(gadget)) {
- hs = (gadget->speed == USB_SPEED_HIGH);
- if (type == USB_DT_OTHER_SPEED_CONFIG)
- hs = !hs;
- }
- if (hs)
- function = is_source_sink
- ? hs_source_sink_function
- : hs_loopback_function;
- else
- function = is_source_sink
- ? fs_source_sink_function
- : fs_loopback_function;
-
- /* for now, don't advertise srp-only devices */
- if (!gadget_is_otg(gadget))
- function++;
-
- len = usb_gadget_config_buf(is_source_sink
- ? &source_sink_config
- : &loopback_config,
- buf, USB_BUFSIZ, function);
- if (len < 0)
- return len;
- ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
- return len;
-}
+static struct usb_gadget_strings *dev_strings[] = {
+ &stringtab_dev,
+ NULL,
+};
/*-------------------------------------------------------------------------*/
-static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
+struct usb_request *alloc_ep_req(struct usb_ep *ep)
{
struct usb_request *req;
req = usb_ep_alloc_request(ep, GFP_ATOMIC);
if (req) {
- req->length = length;
- req->buf = kmalloc(length, GFP_ATOMIC);
+ req->length = buflen;
+ req->buf = kmalloc(buflen, GFP_ATOMIC);
if (!req->buf) {
usb_ep_free_request(ep, req);
req = NULL;
@@ -433,681 +167,73 @@ static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
return req;
}
-static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
+void free_ep_req(struct usb_ep *ep, struct usb_request *req)
{
kfree(req->buf);
usb_ep_free_request(ep, req);
}
-/*-------------------------------------------------------------------------*/
-
-/*
- * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripherals,
- * this just sinks bulk packets OUT to the peripheral and sources them IN
- * to the host, optionally with specific data patterns.
- *
- * In terms of control messaging, this supports all the standard requests
- * plus two that support control-OUT tests.
- *
- * Note that because this doesn't queue more than one request at a time,
- * some other function must be used to test queueing logic. The network
- * link (g_ether) is probably the best option for that.
- */
-
-/* optionally require specific source/sink data patterns */
-
-static int
-check_read_data(
- struct zero_dev *dev,
- struct usb_ep *ep,
- struct usb_request *req
-)
+static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
{
- unsigned i;
- u8 *buf = req->buf;
-
- for (i = 0; i < req->actual; i++, buf++) {
- switch (pattern) {
- /* all-zeroes has no synchronization issues */
- case 0:
- if (*buf == 0)
- continue;
- break;
- /* mod63 stays in sync with short-terminated transfers,
- * or otherwise when host and gadget agree on how large
- * each usb transfer request should be. resync is done
- * with set_interface or set_config.
- */
- case 1:
- if (*buf == (u8)(i % 63))
- continue;
- break;
- }
- ERROR(dev, "bad OUT byte, buf[%d] = %d\n", i, *buf);
- usb_ep_set_halt(ep);
- return -EINVAL;
+ int value;
+
+ if (ep->driver_data) {
+ value = usb_ep_disable(ep);
+ if (value < 0)
+ DBG(cdev, "disable %s --> %d\n",
+ ep->name, value);
+ ep->driver_data = NULL;
}
- return 0;
}
-static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
+void disable_endpoints(struct usb_composite_dev *cdev,
+ struct usb_ep *in, struct usb_ep *out)
{
- unsigned i;
- u8 *buf = req->buf;
-
- switch (pattern) {
- case 0:
- memset(req->buf, 0, req->length);
- break;
- case 1:
- for (i = 0; i < req->length; i++)
- *buf++ = (u8) (i % 63);
- break;
- }
-}
-
-/* if there is only one request in the queue, there'll always be an
- * irq delay between end of one request and start of the next.
- * that prevents using hardware dma queues.
- */
-static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
-{
- struct zero_dev *dev = ep->driver_data;
- int status = req->status;
-
- switch (status) {
-
- case 0: /* normal completion? */
- if (ep == dev->out_ep) {
- check_read_data(dev, ep, req);
- memset(req->buf, 0x55, req->length);
- } else
- reinit_write_data(ep, req);
- break;
-
- /* this endpoint is normally active while we're configured */
- case -ECONNABORTED: /* hardware forced ep reset */
- case -ECONNRESET: /* request dequeued */
- case -ESHUTDOWN: /* disconnect from host */
- VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
- req->actual, req->length);
- if (ep == dev->out_ep)
- check_read_data(dev, ep, req);
- free_ep_req(ep, req);
- return;
-
- case -EOVERFLOW: /* buffer overrun on read means that
- * we didn't provide a big enough
- * buffer.
- */
- default:
-#if 1
- DBG(dev, "%s complete --> %d, %d/%d\n", ep->name,
- status, req->actual, req->length);
-#endif
- case -EREMOTEIO: /* short read */
- break;
- }
-
- status = usb_ep_queue(ep, req, GFP_ATOMIC);
- if (status) {
- ERROR(dev, "kill %s: resubmit %d bytes --> %d\n",
- ep->name, req->length, status);
- usb_ep_set_halt(ep);
- /* FIXME recover later ... somehow */
- }
-}
-
-static struct usb_request *source_sink_start_ep(struct usb_ep *ep)
-{
- struct usb_request *req;
- int status;
-
- req = alloc_ep_req(ep, buflen);
- if (!req)
- return NULL;
-
- memset(req->buf, 0, req->length);
- req->complete = source_sink_complete;
-
- if (strcmp(ep->name, EP_IN_NAME) == 0)
- reinit_write_data(ep, req);
- else
- memset(req->buf, 0x55, req->length);
-
- status = usb_ep_queue(ep, req, GFP_ATOMIC);
- if (status) {
- struct zero_dev *dev = ep->driver_data;
-
- ERROR(dev, "start %s --> %d\n", ep->name, status);
- free_ep_req(ep, req);
- req = NULL;
- }
-
- return req;
-}
-
-static int set_source_sink_config(struct zero_dev *dev)
-{
- int result = 0;
- struct usb_ep *ep;
- struct usb_gadget *gadget = dev->gadget;
-
- gadget_for_each_ep(ep, gadget) {
- const struct usb_endpoint_descriptor *d;
-
- /* one endpoint writes (sources) zeroes in (to the host) */
- if (strcmp(ep->name, EP_IN_NAME) == 0) {
- d = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
- result = usb_ep_enable(ep, d);
- if (result == 0) {
- ep->driver_data = dev;
- if (source_sink_start_ep(ep) != NULL) {
- dev->in_ep = ep;
- continue;
- }
- usb_ep_disable(ep);
- result = -EIO;
- }
-
- /* one endpoint reads (sinks) anything out (from the host) */
- } else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
- d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
- result = usb_ep_enable(ep, d);
- if (result == 0) {
- ep->driver_data = dev;
- if (source_sink_start_ep(ep) != NULL) {
- dev->out_ep = ep;
- continue;
- }
- usb_ep_disable(ep);
- result = -EIO;
- }
-
- /* ignore any other endpoints */
- } else
- continue;
-
- /* stop on error */
- ERROR(dev, "can't start %s, result %d\n", ep->name, result);
- break;
- }
- if (result == 0)
- DBG(dev, "buflen %d\n", buflen);
-
- /* caller is responsible for cleanup on error */
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void loopback_complete(struct usb_ep *ep, struct usb_request *req)
-{
- struct zero_dev *dev = ep->driver_data;
- int status = req->status;
-
- switch (status) {
-
- case 0: /* normal completion? */
- if (ep == dev->out_ep) {
- /* loop this OUT packet back IN to the host */
- req->zero = (req->actual < req->length);
- req->length = req->actual;
- status = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
- if (status == 0)
- return;
-
- /* "should never get here" */
- ERROR(dev, "can't loop %s to %s: %d\n",
- ep->name, dev->in_ep->name,
- status);
- }
-
- /* queue the buffer for some later OUT packet */
- req->length = buflen;
- status = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
- if (status == 0)
- return;
-
- /* "should never get here" */
- /* FALLTHROUGH */
-
- default:
- ERROR(dev, "%s loop complete --> %d, %d/%d\n", ep->name,
- status, req->actual, req->length);
- /* FALLTHROUGH */
-
- /* NOTE: since this driver doesn't maintain an explicit record
- * of requests it submitted (just maintains qlen count), we
- * rely on the hardware driver to clean up on disconnect or
- * endpoint disable.
- */
- case -ECONNABORTED: /* hardware forced ep reset */
- case -ECONNRESET: /* request dequeued */
- case -ESHUTDOWN: /* disconnect from host */
- free_ep_req(ep, req);
- return;
- }
-}
-
-static int set_loopback_config(struct zero_dev *dev)
-{
- int result = 0;
- struct usb_ep *ep;
- struct usb_gadget *gadget = dev->gadget;
-
- gadget_for_each_ep(ep, gadget) {
- const struct usb_endpoint_descriptor *d;
-
- /* one endpoint writes data back IN to the host */
- if (strcmp(ep->name, EP_IN_NAME) == 0) {
- d = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
- result = usb_ep_enable(ep, d);
- if (result == 0) {
- ep->driver_data = dev;
- dev->in_ep = ep;
- continue;
- }
-
- /* one endpoint just reads OUT packets */
- } else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
- d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
- result = usb_ep_enable(ep, d);
- if (result == 0) {
- ep->driver_data = dev;
- dev->out_ep = ep;
- continue;
- }
-
- /* ignore any other endpoints */
- } else
- continue;
-
- /* stop on error */
- ERROR(dev, "can't enable %s, result %d\n", ep->name, result);
- break;
- }
-
- /* allocate a bunch of read buffers and queue them all at once.
- * we buffer at most 'qlen' transfers; fewer if any need more
- * than 'buflen' bytes each.
- */
- if (result == 0) {
- struct usb_request *req;
- unsigned i;
-
- ep = dev->out_ep;
- for (i = 0; i < qlen && result == 0; i++) {
- req = alloc_ep_req(ep, buflen);
- if (req) {
- req->complete = loopback_complete;
- result = usb_ep_queue(ep, req, GFP_ATOMIC);
- if (result)
- DBG(dev, "%s queue req --> %d\n",
- ep->name, result);
- } else
- result = -ENOMEM;
- }
- }
- if (result == 0)
- DBG(dev, "qlen %d, buflen %d\n", qlen, buflen);
-
- /* caller is responsible for cleanup on error */
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void zero_reset_config(struct zero_dev *dev)
-{
- if (dev->config == 0)
- return;
-
- DBG(dev, "reset config\n");
-
- /* just disable endpoints, forcing completion of pending i/o.
- * all our completion handlers free their requests in this case.
- */
- if (dev->in_ep) {
- usb_ep_disable(dev->in_ep);
- dev->in_ep = NULL;
- }
- if (dev->out_ep) {
- usb_ep_disable(dev->out_ep);
- dev->out_ep = NULL;
- }
- dev->config = 0;
- del_timer(&dev->resume);
-}
-
-/* change our operational config. this code must agree with the code
- * that returns config descriptors, and altsetting code.
- *
- * it's also responsible for power management interactions. some
- * configurations might not work with our current power sources.
- *
- * note that some device controller hardware will constrain what this
- * code can do, perhaps by disallowing more than one configuration or
- * by limiting configuration choices (like the pxa2xx).
- */
-static int zero_set_config(struct zero_dev *dev, unsigned number)
-{
- int result = 0;
- struct usb_gadget *gadget = dev->gadget;
-
- if (number == dev->config)
- return 0;
-
- if (gadget_is_sa1100(gadget) && dev->config) {
- /* tx fifo is full, but we can't clear it...*/
- ERROR(dev, "can't change configurations\n");
- return -ESPIPE;
- }
- zero_reset_config(dev);
-
- switch (number) {
- case CONFIG_SOURCE_SINK:
- result = set_source_sink_config(dev);
- break;
- case CONFIG_LOOPBACK:
- result = set_loopback_config(dev);
- break;
- default:
- result = -EINVAL;
- /* FALL THROUGH */
- case 0:
- return result;
- }
-
- if (!result && (!dev->in_ep || !dev->out_ep))
- result = -ENODEV;
- if (result)
- zero_reset_config(dev);
- else {
- char *speed;
-
- switch (gadget->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }
-
- dev->config = number;
- INFO(dev, "%s speed config #%d: %s\n", speed, number,
- (number == CONFIG_SOURCE_SINK)
- ? source_sink : loopback);
- }
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void zero_setup_complete(struct usb_ep *ep, struct usb_request *req)
-{
- if (req->status || req->actual != req->length)
- DBG((struct zero_dev *) ep->driver_data,
- "setup complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
-}
-
-/*
- * The setup() callback implements all the ep0 functionality that's
- * not handled lower down, in hardware or the hardware driver (like
- * device and endpoint feature flags, and their status). It's all
- * housekeeping for the gadget function we're implementing. Most of
- * the work is in config-specific setup.
- */
-static int
-zero_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
-{
- struct zero_dev *dev = get_gadget_data(gadget);
- struct usb_request *req = dev->req;
- int value = -EOPNOTSUPP;
- u16 w_index = le16_to_cpu(ctrl->wIndex);
- u16 w_value = le16_to_cpu(ctrl->wValue);
- u16 w_length = le16_to_cpu(ctrl->wLength);
-
- /* usually this stores reply data in the pre-allocated ep0 buffer,
- * but config change events will reconfigure hardware.
- */
- req->zero = 0;
- switch (ctrl->bRequest) {
-
- case USB_REQ_GET_DESCRIPTOR:
- if (ctrl->bRequestType != USB_DIR_IN)
- goto unknown;
- switch (w_value >> 8) {
-
- case USB_DT_DEVICE:
- value = min(w_length, (u16) sizeof device_desc);
- memcpy(req->buf, &device_desc, value);
- break;
- case USB_DT_DEVICE_QUALIFIER:
- if (!gadget_is_dualspeed(gadget))
- break;
- value = min(w_length, (u16) sizeof dev_qualifier);
- memcpy(req->buf, &dev_qualifier, value);
- break;
-
- case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget_is_dualspeed(gadget))
- break;
- // FALLTHROUGH
- case USB_DT_CONFIG:
- value = config_buf(gadget, req->buf,
- w_value >> 8,
- w_value & 0xff);
- if (value >= 0)
- value = min(w_length, (u16) value);
- break;
-
- case USB_DT_STRING:
- /* wIndex == language code.
- * this driver only handles one language, you can
- * add string tables for other languages, using
- * any UTF-8 characters
- */
- value = usb_gadget_get_string(&stringtab,
- w_value & 0xff, req->buf);
- if (value >= 0)
- value = min(w_length, (u16) value);
- break;
- }
- break;
-
- /* currently two configs, two speeds */
- case USB_REQ_SET_CONFIGURATION:
- if (ctrl->bRequestType != 0)
- goto unknown;
- if (gadget->a_hnp_support)
- DBG(dev, "HNP available\n");
- else if (gadget->a_alt_hnp_support)
- DBG(dev, "HNP needs a different root port\n");
- else
- VDBG(dev, "HNP inactive\n");
- spin_lock(&dev->lock);
- value = zero_set_config(dev, w_value);
- spin_unlock(&dev->lock);
- break;
- case USB_REQ_GET_CONFIGURATION:
- if (ctrl->bRequestType != USB_DIR_IN)
- goto unknown;
- *(u8 *)req->buf = dev->config;
- value = min(w_length, (u16) 1);
- break;
-
- /* until we add altsetting support, or other interfaces,
- * only 0/0 are possible. pxa2xx only supports 0/0 (poorly)
- * and already killed pending endpoint I/O.
- */
- case USB_REQ_SET_INTERFACE:
- if (ctrl->bRequestType != USB_RECIP_INTERFACE)
- goto unknown;
- spin_lock(&dev->lock);
- if (dev->config && w_index == 0 && w_value == 0) {
- u8 config = dev->config;
-
- /* resets interface configuration, forgets about
- * previous transaction state (queued bufs, etc)
- * and re-inits endpoint state (toggle etc)
- * no response queued, just zero status == success.
- * if we had more than one interface we couldn't
- * use this "reset the config" shortcut.
- */
- zero_reset_config(dev);
- zero_set_config(dev, config);
- value = 0;
- }
- spin_unlock(&dev->lock);
- break;
- case USB_REQ_GET_INTERFACE:
- if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
- goto unknown;
- if (!dev->config)
- break;
- if (w_index != 0) {
- value = -EDOM;
- break;
- }
- *(u8 *)req->buf = 0;
- value = min(w_length, (u16) 1);
- break;
-
- /*
- * These are the same vendor-specific requests supported by
- * Intel's USB 2.0 compliance test devices. We exceed that
- * device spec by allowing multiple-packet requests.
- */
- case 0x5b: /* control WRITE test -- fill the buffer */
- if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
- goto unknown;
- if (w_value || w_index)
- break;
- /* just read that many bytes into the buffer */
- if (w_length > USB_BUFSIZ)
- break;
- value = w_length;
- break;
- case 0x5c: /* control READ test -- return the buffer */
- if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
- goto unknown;
- if (w_value || w_index)
- break;
- /* expect those bytes are still in the buffer; send back */
- if (w_length > USB_BUFSIZ
- || w_length != req->length)
- break;
- value = w_length;
- break;
-
- default:
-unknown:
- VDBG(dev,
- "unknown control req%02x.%02x v%04x i%04x l%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- w_value, w_index, w_length);
- }
-
- /* respond with data transfer before status phase? */
- if (value >= 0) {
- req->length = value;
- req->zero = value < w_length;
- value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
- if (value < 0) {
- DBG(dev, "ep_queue --> %d\n", value);
- req->status = 0;
- zero_setup_complete(gadget->ep0, req);
- }
- }
-
- /* device either stalls (value < 0) or reports success */
- return value;
-}
-
-static void zero_disconnect(struct usb_gadget *gadget)
-{
- struct zero_dev *dev = get_gadget_data(gadget);
- unsigned long flags;
-
- spin_lock_irqsave(&dev->lock, flags);
- zero_reset_config(dev);
-
- /* a more significant application might have some non-usb
- * activities to quiesce here, saving resources like power
- * or pushing the notification up a network stack.
- */
- spin_unlock_irqrestore(&dev->lock, flags);
-
- /* next we may get setup() calls to enumerate new connections;
- * or an unbind() during shutdown (including removing module).
- */
-}
-
-static void zero_autoresume(unsigned long _dev)
-{
- struct zero_dev *dev = (struct zero_dev *) _dev;
- int status;
-
- /* normally the host would be woken up for something
- * more significant than just a timer firing...
- */
- if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
- status = usb_gadget_wakeup(dev->gadget);
- DBG(dev, "wakeup --> %d\n", status);
- }
+ disable_ep(cdev, in);
+ disable_ep(cdev, out);
}
/*-------------------------------------------------------------------------*/
-static void zero_unbind(struct usb_gadget *gadget)
+static int __init zero_bind(struct usb_composite_dev *cdev)
{
- struct zero_dev *dev = get_gadget_data(gadget);
-
- DBG(dev, "unbind\n");
-
- /* we've already been disconnected ... no i/o is active */
- if (dev->req) {
- dev->req->length = USB_BUFSIZ;
- free_ep_req(gadget->ep0, dev->req);
- }
- del_timer_sync(&dev->resume);
- kfree(dev);
- set_gadget_data(gadget, NULL);
-}
-
-static int __init zero_bind(struct usb_gadget *gadget)
-{
- struct zero_dev *dev;
- struct usb_ep *ep;
int gcnum;
+ struct usb_gadget *gadget = cdev->gadget;
+ int id;
- /* FIXME this can't yet work right with SH ... it has only
- * one configuration, numbered one.
+ /* Allocate string descriptor numbers ... note that string
+ * contents can be overridden by the composite_dev glue.
*/
- if (gadget_is_sh(gadget))
- return -ENODEV;
-
- /* Bulk-only drivers like this one SHOULD be able to
- * autoconfigure on any sane usb controller driver,
- * but there may also be important quirks to address.
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_dev[STRING_MANUFACTURER_IDX].id = id;
+ device_desc.iManufacturer = id;
+
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_dev[STRING_PRODUCT_IDX].id = id;
+ device_desc.iProduct = id;
+
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_dev[STRING_SERIAL_IDX].id = id;
+ device_desc.iSerialNumber = id;
+
+ /* Register primary, then secondary configuration. Note that
+ * SH3 only allows one config...
*/
- usb_ep_autoconfig_reset(gadget);
- ep = usb_ep_autoconfig(gadget, &fs_source_desc);
- if (!ep) {
-autoconf_fail:
- pr_err("%s: can't autoconfigure on %s\n",
- shortname, gadget->name);
- return -ENODEV;
+ if (loopdefault) {
+ loopback_add(cdev);
+ if (!gadget_is_sh(gadget))
+ sourcesink_add(cdev);
+ } else {
+ sourcesink_add(cdev);
+ if (!gadget_is_sh(gadget))
+ loopback_add(cdev);
}
- EP_IN_NAME = ep->name;
- ep->driver_data = ep; /* claim */
-
- ep = usb_ep_autoconfig(gadget, &fs_sink_desc);
- if (!ep)
- goto autoconf_fail;
- EP_OUT_NAME = ep->name;
- ep->driver_data = ep; /* claim */
gcnum = usb_gadget_controller_number(gadget);
if (gcnum >= 0)
@@ -1115,144 +241,44 @@ autoconf_fail:
else {
/* gadget zero is so simple (for now, no altsettings) that
* it SHOULD NOT have problems with bulk-capable hardware.
- * so warn about unrcognized controllers, don't panic.
+ * so just warn about unrcognized controllers -- don't panic.
*
* things like configuration and altsetting numbering
* can need hardware-specific attention though.
*/
pr_warning("%s: controller '%s' not recognized\n",
- shortname, gadget->name);
+ longname, gadget->name);
device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
}
- /* ok, we made sense of the hardware ... */
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
- spin_lock_init(&dev->lock);
- dev->gadget = gadget;
- set_gadget_data(gadget, dev);
-
- init_timer(&dev->resume);
- dev->resume.function = zero_autoresume;
- dev->resume.data = (unsigned long) dev;
-
- /* preallocate control response and buffer */
- dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
- if (!dev->req)
- goto enomem;
- dev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
- if (!dev->req->buf)
- goto enomem;
-
- dev->req->complete = zero_setup_complete;
-
- device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-
- if (gadget_is_dualspeed(gadget)) {
- /* assume ep0 uses the same value for both speeds ... */
- dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
-
- /* and that all endpoints are dual-speed */
- hs_source_desc.bEndpointAddress =
- fs_source_desc.bEndpointAddress;
- hs_sink_desc.bEndpointAddress =
- fs_sink_desc.bEndpointAddress;
- }
-
- if (gadget_is_otg(gadget)) {
- otg_descriptor.bmAttributes |= USB_OTG_HNP,
- source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- }
-
- usb_gadget_set_selfpowered(gadget);
-
- if (autoresume) {
- source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- }
-
- gadget->ep0->driver_data = dev;
-
- INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname);
- INFO(dev, "using %s, OUT %s IN %s\n", gadget->name,
- EP_OUT_NAME, EP_IN_NAME);
+ INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname);
snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
return 0;
-
-enomem:
- zero_unbind(gadget);
- return -ENOMEM;
}
-/*-------------------------------------------------------------------------*/
-
-static void zero_suspend(struct usb_gadget *gadget)
-{
- struct zero_dev *dev = get_gadget_data(gadget);
-
- if (gadget->speed == USB_SPEED_UNKNOWN)
- return;
-
- if (autoresume) {
- mod_timer(&dev->resume, jiffies + (HZ * autoresume));
- DBG(dev, "suspend, wakeup in %d seconds\n", autoresume);
- } else
- DBG(dev, "suspend\n");
-}
-
-static void zero_resume(struct usb_gadget *gadget)
-{
- struct zero_dev *dev = get_gadget_data(gadget);
-
- DBG(dev, "resume\n");
- del_timer(&dev->resume);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static struct usb_gadget_driver zero_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- .speed = USB_SPEED_HIGH,
-#else
- .speed = USB_SPEED_FULL,
-#endif
- .function = (char *) longname,
+static struct usb_composite_driver zero_driver = {
+ .name = "zero",
+ .dev = &device_desc,
+ .strings = dev_strings,
.bind = zero_bind,
- .unbind = __exit_p(zero_unbind),
-
- .setup = zero_setup,
- .disconnect = zero_disconnect,
-
- .suspend = zero_suspend,
- .resume = zero_resume,
-
- .driver = {
- .name = (char *) shortname,
- .owner = THIS_MODULE,
- },
};
MODULE_AUTHOR("David Brownell");
MODULE_LICENSE("GPL");
-
static int __init init(void)
{
- return usb_gadget_register_driver(&zero_driver);
+ return usb_composite_register(&zero_driver);
}
module_init(init);
static void __exit cleanup(void)
{
- usb_gadget_unregister_driver(&zero_driver);
+ usb_composite_unregister(&zero_driver);
}
module_exit(cleanup);
-
OpenPOWER on IntegriCloud