diff options
Diffstat (limited to 'drivers/usb/gadget/zero.c')
| -rw-r--r-- | drivers/usb/gadget/zero.c | 78 |
1 files changed, 70 insertions, 8 deletions
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 361d965..2d77240 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -102,22 +102,32 @@ module_param(loopdefault, bool, S_IRUGO|S_IWUSR); #ifndef CONFIG_USB_ZERO_HNPTEST #define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ #define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ +#define DEFAULT_AUTORESUME 0 #else #define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ #define DRIVER_PRODUCT_NUM 0xbadd +#define DEFAULT_AUTORESUME 5 #endif +/* If the optional "autoresume" mode is enabled, it provides good + * functional coverage for the "USBCV" test harness from USB-IF. + * It's always set if OTG mode is enabled. + */ +unsigned autoresume = DEFAULT_AUTORESUME; +module_param(autoresume, uint, S_IRUGO); +MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup"); + /*-------------------------------------------------------------------------*/ static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16(0x0200), + .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_VENDOR_SPEC, - .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM), - .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM), + .idVendor = cpu_to_le16(DRIVER_VENDOR_NUM), + .idProduct = cpu_to_le16(DRIVER_PRODUCT_NUM), .bNumConfigurations = 2, }; @@ -212,6 +222,47 @@ void disable_endpoints(struct usb_composite_dev *cdev, /*-------------------------------------------------------------------------*/ +static struct timer_list autoresume_timer; + +static void zero_autoresume(unsigned long _c) +{ + struct usb_composite_dev *cdev = (void *)_c; + struct usb_gadget *g = cdev->gadget; + + /* unconfigured devices can't issue wakeups */ + if (!cdev->config) + return; + + /* Normally the host would be woken up for something + * more significant than just a timer firing; likely + * because of some direct user request. + */ + if (g->speed != USB_SPEED_UNKNOWN) { + int status = usb_gadget_wakeup(g); + INFO(cdev, "%s --> %d\n", __func__, status); + } +} + +static void zero_suspend(struct usb_composite_dev *cdev) +{ + if (cdev->gadget->speed == USB_SPEED_UNKNOWN) + return; + + if (autoresume) { + mod_timer(&autoresume_timer, jiffies + (HZ * autoresume)); + DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume); + } else + DBG(cdev, "%s\n", __func__); +} + +static void zero_resume(struct usb_composite_dev *cdev) +{ + DBG(cdev, "%s\n", __func__); + del_timer(&autoresume_timer); +} + +/*-------------------------------------------------------------------------*/ + static int __init zero_bind(struct usb_composite_dev *cdev) { int gcnum; @@ -239,17 +290,19 @@ static int __init zero_bind(struct usb_composite_dev *cdev) strings_dev[STRING_SERIAL_IDX].id = id; device_desc.iSerialNumber = id; + setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev); + /* Register primary, then secondary configuration. Note that * SH3 only allows one config... */ if (loopdefault) { - loopback_add(cdev); + loopback_add(cdev, autoresume != 0); if (!gadget_is_sh(gadget)) - sourcesink_add(cdev); + sourcesink_add(cdev, autoresume != 0); } else { - sourcesink_add(cdev); + sourcesink_add(cdev, autoresume != 0); if (!gadget_is_sh(gadget)) - loopback_add(cdev); + loopback_add(cdev, autoresume != 0); } gcnum = usb_gadget_controller_number(gadget); @@ -265,7 +318,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev) */ pr_warning("%s: controller '%s' not recognized\n", longname, gadget->name); - device_desc.bcdDevice = __constant_cpu_to_le16(0x9999); + device_desc.bcdDevice = cpu_to_le16(0x9999); } @@ -278,11 +331,20 @@ static int __init zero_bind(struct usb_composite_dev *cdev) return 0; } +static int zero_unbind(struct usb_composite_dev *cdev) +{ + del_timer_sync(&autoresume_timer); + return 0; +} + static struct usb_composite_driver zero_driver = { .name = "zero", .dev = &device_desc, .strings = dev_strings, .bind = zero_bind, + .unbind = zero_unbind, + .suspend = zero_suspend, + .resume = zero_resume, }; MODULE_AUTHOR("David Brownell"); |
