diff options
Diffstat (limited to 'drivers/usb/gadget/udc/mv_u3d.h')
| -rw-r--r-- | drivers/usb/gadget/udc/mv_u3d.h | 320 |
1 files changed, 320 insertions, 0 deletions
diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h new file mode 100644 index 0000000..e32a787 --- /dev/null +++ b/drivers/usb/gadget/udc/mv_u3d.h @@ -0,0 +1,320 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#ifndef __MV_U3D_H +#define __MV_U3D_H + +#define MV_U3D_EP_CONTEXT_ALIGNMENT 32 +#define MV_U3D_TRB_ALIGNMENT 16 +#define MV_U3D_DMA_BOUNDARY 4096 +#define MV_U3D_EP0_MAX_PKT_SIZE 512 + +/* ep0 transfer state */ +#define MV_U3D_WAIT_FOR_SETUP 0 +#define MV_U3D_DATA_STATE_XMIT 1 +#define MV_U3D_DATA_STATE_NEED_ZLP 2 +#define MV_U3D_WAIT_FOR_OUT_STATUS 3 +#define MV_U3D_DATA_STATE_RECV 4 +#define MV_U3D_STATUS_STAGE 5 + +#define MV_U3D_EP_MAX_LENGTH_TRANSFER 0x10000 + +/* USB3 Interrupt Status */ +#define MV_U3D_USBINT_SETUP 0x00000001 +#define MV_U3D_USBINT_RX_COMPLETE 0x00000002 +#define MV_U3D_USBINT_TX_COMPLETE 0x00000004 +#define MV_U3D_USBINT_UNDER_RUN 0x00000008 +#define MV_U3D_USBINT_RXDESC_ERR 0x00000010 +#define MV_U3D_USBINT_TXDESC_ERR 0x00000020 +#define MV_U3D_USBINT_RX_TRB_COMPLETE 0x00000040 +#define MV_U3D_USBINT_TX_TRB_COMPLETE 0x00000080 +#define MV_U3D_USBINT_VBUS_VALID 0x00010000 +#define MV_U3D_USBINT_STORAGE_CMD_FULL 0x00020000 +#define MV_U3D_USBINT_LINK_CHG 0x01000000 + +/* USB3 Interrupt Enable */ +#define MV_U3D_INTR_ENABLE_SETUP 0x00000001 +#define MV_U3D_INTR_ENABLE_RX_COMPLETE 0x00000002 +#define MV_U3D_INTR_ENABLE_TX_COMPLETE 0x00000004 +#define MV_U3D_INTR_ENABLE_UNDER_RUN 0x00000008 +#define MV_U3D_INTR_ENABLE_RXDESC_ERR 0x00000010 +#define MV_U3D_INTR_ENABLE_TXDESC_ERR 0x00000020 +#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE 0x00000040 +#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE 0x00000080 +#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR 0x00000100 +#define MV_U3D_INTR_ENABLE_VBUS_VALID 0x00010000 +#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL 0x00020000 +#define MV_U3D_INTR_ENABLE_LINK_CHG 0x01000000 +#define MV_U3D_INTR_ENABLE_PRIME_STATUS 0x02000000 + +/* USB3 Link Change */ +#define MV_U3D_LINK_CHANGE_LINK_UP 0x00000001 +#define MV_U3D_LINK_CHANGE_SUSPEND 0x00000002 +#define MV_U3D_LINK_CHANGE_RESUME 0x00000004 +#define MV_U3D_LINK_CHANGE_WRESET 0x00000008 +#define MV_U3D_LINK_CHANGE_HRESET 0x00000010 +#define MV_U3D_LINK_CHANGE_VBUS_INVALID 0x00000020 +#define MV_U3D_LINK_CHANGE_INACT 0x00000040 +#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0 0x00000080 +#define MV_U3D_LINK_CHANGE_U1 0x00000100 +#define MV_U3D_LINK_CHANGE_U2 0x00000200 +#define MV_U3D_LINK_CHANGE_U3 0x00000400 + +/* bridge setting */ +#define MV_U3D_BRIDGE_SETTING_VBUS_VALID (1 << 16) + +/* Command Register Bit Masks */ +#define MV_U3D_CMD_RUN_STOP 0x00000001 +#define MV_U3D_CMD_CTRL_RESET 0x00000002 + +/* ep control register */ +#define MV_U3D_EPXCR_EP_TYPE_CONTROL 0 +#define MV_U3D_EPXCR_EP_TYPE_ISOC 1 +#define MV_U3D_EPXCR_EP_TYPE_BULK 2 +#define MV_U3D_EPXCR_EP_TYPE_INT 3 +#define MV_U3D_EPXCR_EP_ENABLE_SHIFT 4 +#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT 12 +#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT 16 +#define MV_U3D_USB_BULK_BURST_OUT 6 +#define MV_U3D_USB_BULK_BURST_IN 14 + +#define MV_U3D_EPXCR_EP_FLUSH (1 << 7) +#define MV_U3D_EPXCR_EP_HALT (1 << 1) +#define MV_U3D_EPXCR_EP_INIT (1) + +/* TX/RX Status Register */ +#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT 24 +#define MV_U3D_COMPLETE_INVALID 0 +#define MV_U3D_COMPLETE_SUCCESS 1 +#define MV_U3D_COMPLETE_BUFF_ERR 2 +#define MV_U3D_COMPLETE_SHORT_PACKET 3 +#define MV_U3D_COMPLETE_TRB_ERR 5 +#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK (0xFFFFFF) + +#define MV_U3D_USB_LINK_BYPASS_VBUS 0x8 + +#define MV_U3D_LTSSM_PHY_INIT_DONE 0x80000000 +#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE 0x40000000 + +#define MV_U3D_USB3_OP_REGS_OFFSET 0x100 +#define MV_U3D_USB3_PHY_OFFSET 0xB800 + +#define DCS_ENABLE 0x1 + +/* timeout */ +#define MV_U3D_RESET_TIMEOUT 10000 +#define MV_U3D_FLUSH_TIMEOUT 100000 +#define MV_U3D_OWN_TIMEOUT 10000 +#define LOOPS_USEC_SHIFT 4 +#define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) +#define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) + +/* ep direction */ +#define MV_U3D_EP_DIR_IN 1 +#define MV_U3D_EP_DIR_OUT 0 +#define mv_u3d_ep_dir(ep) (((ep)->ep_num == 0) ? \ + ((ep)->u3d->ep0_dir) : ((ep)->direction)) + +/* usb capability registers */ +struct mv_u3d_cap_regs { + u32 rsvd[5]; + u32 dboff; /* doorbell register offset */ + u32 rtsoff; /* runtime register offset */ + u32 vuoff; /* vendor unique register offset */ +}; + +/* operation registers */ +struct mv_u3d_op_regs { + u32 usbcmd; /* Command register */ + u32 rsvd1[11]; + u32 dcbaapl; /* Device Context Base Address low register */ + u32 dcbaaph; /* Device Context Base Address high register */ + u32 rsvd2[243]; + u32 portsc; /* port status and control register*/ + u32 portlinkinfo; /* port link info register*/ + u32 rsvd3[9917]; + u32 doorbell; /* doorbell register */ +}; + +/* control enpoint enable registers */ +struct epxcr { + u32 epxoutcr0; /* ep out control 0 register */ + u32 epxoutcr1; /* ep out control 1 register */ + u32 epxincr0; /* ep in control 0 register */ + u32 epxincr1; /* ep in control 1 register */ +}; + +/* transfer status registers */ +struct xferstatus { + u32 curdeqlo; /* current TRB pointer low */ + u32 curdeqhi; /* current TRB pointer high */ + u32 statuslo; /* transfer status low */ + u32 statushi; /* transfer status high */ +}; + +/* vendor unique control registers */ +struct mv_u3d_vuc_regs { + u32 ctrlepenable; /* control endpoint enable register */ + u32 setuplock; /* setup lock register */ + u32 endcomplete; /* endpoint transfer complete register */ + u32 intrcause; /* interrupt cause register */ + u32 intrenable; /* interrupt enable register */ + u32 trbcomplete; /* TRB complete register */ + u32 linkchange; /* link change register */ + u32 rsvd1[5]; + u32 trbunderrun; /* TRB underrun register */ + u32 rsvd2[43]; + u32 bridgesetting; /* bridge setting register */ + u32 rsvd3[7]; + struct xferstatus txst[16]; /* TX status register */ + struct xferstatus rxst[16]; /* RX status register */ + u32 ltssm; /* LTSSM control register */ + u32 pipe; /* PIPE control register */ + u32 linkcr0; /* link control 0 register */ + u32 linkcr1; /* link control 1 register */ + u32 rsvd6[60]; + u32 mib0; /* MIB0 counter register */ + u32 usblink; /* usb link control register */ + u32 ltssmstate; /* LTSSM state register */ + u32 linkerrorcause; /* link error cause register */ + u32 rsvd7[60]; + u32 devaddrtiebrkr; /* device address and tie breaker */ + u32 itpinfo0; /* ITP info 0 register */ + u32 itpinfo1; /* ITP info 1 register */ + u32 rsvd8[61]; + struct epxcr epcr[16]; /* ep control register */ + u32 rsvd9[64]; + u32 phyaddr; /* PHY address register */ + u32 phydata; /* PHY data register */ +}; + +/* Endpoint context structure */ +struct mv_u3d_ep_context { + u32 rsvd0; + u32 rsvd1; + u32 trb_addr_lo; /* TRB address low 32 bit */ + u32 trb_addr_hi; /* TRB address high 32 bit */ + u32 rsvd2; + u32 rsvd3; + struct usb_ctrlrequest setup_buffer; /* setup data buffer */ +}; + +/* TRB control data structure */ +struct mv_u3d_trb_ctrl { + u32 own:1; /* owner of TRB */ + u32 rsvd1:3; + u32 chain:1; /* associate this TRB with the + next TRB on the Ring */ + u32 ioc:1; /* interrupt on complete */ + u32 rsvd2:4; + u32 type:6; /* TRB type */ +#define TYPE_NORMAL 1 +#define TYPE_DATA 3 +#define TYPE_LINK 6 + u32 dir:1; /* Working at data stage of control endpoint + operation. 0 is OUT and 1 is IN. */ + u32 rsvd3:15; +}; + +/* TRB data structure + * For multiple TRB, all the TRBs' physical address should be continuous. + */ +struct mv_u3d_trb_hw { + u32 buf_addr_lo; /* data buffer address low 32 bit */ + u32 buf_addr_hi; /* data buffer address high 32 bit */ + u32 trb_len; /* transfer length */ + struct mv_u3d_trb_ctrl ctrl; /* TRB control data */ +}; + +/* TRB structure */ +struct mv_u3d_trb { + struct mv_u3d_trb_hw *trb_hw; /* point to the trb_hw structure */ + dma_addr_t trb_dma; /* dma address for this trb_hw */ + struct list_head trb_list; /* trb list */ +}; + +/* device data structure */ +struct mv_u3d { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + spinlock_t lock; /* device lock */ + struct completion *done; + struct device *dev; + int irq; + + /* usb controller registers */ + struct mv_u3d_cap_regs __iomem *cap_regs; + struct mv_u3d_op_regs __iomem *op_regs; + struct mv_u3d_vuc_regs __iomem *vuc_regs; + void __iomem *phy_regs; + + unsigned int max_eps; + struct mv_u3d_ep_context *ep_context; + size_t ep_context_size; + dma_addr_t ep_context_dma; + + struct dma_pool *trb_pool; /* for TRB data structure */ + struct mv_u3d_ep *eps; + + struct mv_u3d_req *status_req; /* ep0 status request */ + struct usb_ctrlrequest local_setup_buff; /* store setup data*/ + + unsigned int resume_state; /* USB state to resume */ + unsigned int usb_state; /* USB current state */ + unsigned int ep0_state; /* Endpoint zero state */ + unsigned int ep0_dir; + + unsigned int dev_addr; /* device address */ + + unsigned int errors; + + unsigned softconnect:1; + unsigned vbus_active:1; /* vbus is active or not */ + unsigned remote_wakeup:1; /* support remote wakeup */ + unsigned clock_gating:1; /* clock gating or not */ + unsigned active:1; /* udc is active or not */ + unsigned vbus_valid_detect:1; /* udc vbus detection */ + + struct mv_usb_addon_irq *vbus; + unsigned int power; + + struct clk *clk; +}; + +/* endpoint data structure */ +struct mv_u3d_ep { + struct usb_ep ep; + struct mv_u3d *u3d; + struct list_head queue; /* ep request queued hardware */ + struct list_head req_list; /* list of ep request */ + struct mv_u3d_ep_context *ep_context; /* ep context */ + u32 direction; + char name[14]; + u32 processing; /* there is ep request + queued on haredware */ + spinlock_t req_lock; /* ep lock */ + unsigned wedge:1; + unsigned enabled:1; + unsigned ep_type:2; + unsigned ep_num:8; +}; + +/* request data structure */ +struct mv_u3d_req { + struct usb_request req; + struct mv_u3d_ep *ep; + struct list_head queue; /* ep requst queued on hardware */ + struct list_head list; /* ep request list */ + struct list_head trb_list; /* trb list of a request */ + + struct mv_u3d_trb *trb_head; /* point to first trb of a request */ + unsigned trb_count; /* TRB number in the chain */ + unsigned chain; /* TRB chain or not */ +}; + +#endif |
