summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/pxa2xx_udc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/pxa2xx_udc.c')
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c43
1 files changed, 27 insertions, 16 deletions
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index b8b4524..6a0b957 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -1,6 +1,6 @@
/*
* linux/drivers/usb/gadget/pxa2xx_udc.c
- * Intel PXA2xx and IXP4xx on-chip full speed USB device controllers
+ * Intel PXA25x and IXP4xx on-chip full speed USB device controllers
*
* Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
* Copyright (C) 2003 Robert Schwebel, Pengutronix
@@ -63,7 +63,7 @@
/*
- * This driver handles the USB Device Controller (UDC) in Intel's PXA 2xx
+ * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
* series processors. The UDC for the IXP 4xx series is very similar.
* There are fifteen endpoints, in addition to ep0.
*
@@ -79,8 +79,8 @@
* pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
*/
-#define DRIVER_VERSION "14-Dec-2003"
-#define DRIVER_DESC "PXA 2xx USB Device Controller driver"
+#define DRIVER_VERSION "4-May-2005"
+#define DRIVER_DESC "PXA 25x USB Device Controller driver"
static const char driver_name [] = "pxa2xx_udc";
@@ -290,6 +290,7 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep,
static int pxa2xx_ep_disable (struct usb_ep *_ep)
{
struct pxa2xx_ep *ep;
+ unsigned long flags;
ep = container_of (_ep, struct pxa2xx_ep, ep);
if (!_ep || !ep->desc) {
@@ -297,6 +298,8 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep)
_ep ? ep->ep.name : NULL);
return -EINVAL;
}
+ local_irq_save(flags);
+
nuke (ep, -ESHUTDOWN);
#ifdef USE_DMA
@@ -313,6 +316,7 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep)
ep->desc = NULL;
ep->stopped = 1;
+ local_irq_restore(flags);
DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
return 0;
}
@@ -971,10 +975,10 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
kick_dma(ep, req);
#endif
/* can the FIFO can satisfy the request immediately? */
- } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0
- && (*ep->reg_udccs & UDCCS_BI_TFS) != 0
- && write_fifo(ep, req)) {
- req = NULL;
+ } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
+ if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0
+ && write_fifo(ep, req))
+ req = NULL;
} else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0
&& read_fifo(ep, req)) {
req = NULL;
@@ -1290,7 +1294,7 @@ udc_proc_read(char *page, char **start, off_t off, int count,
"%s version: %s\nGadget driver: %s\nHost %s\n\n",
driver_name, DRIVER_VERSION SIZE_STR DMASTR,
dev->driver ? dev->driver->driver.name : "(none)",
- is_usb_connected() ? "full speed" : "disconnected");
+ is_vbus_present() ? "full speed" : "disconnected");
size -= t;
next += t;
@@ -1339,7 +1343,7 @@ udc_proc_read(char *page, char **start, off_t off, int count,
next += t;
}
- if (!is_usb_connected() || !dev->driver)
+ if (!is_vbus_present() || !dev->driver)
goto done;
t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
@@ -1454,7 +1458,7 @@ static void udc_disable(struct pxa2xx_udc *dev)
UFNRH = UFNRH_SIM;
/* if hardware supports it, disconnect from usb */
- make_usb_disappear();
+ pullup_off();
udc_clear_mask_UDCCR(UDCCR_UDE);
@@ -1567,7 +1571,7 @@ static void udc_enable (struct pxa2xx_udc *dev)
UICR0 &= ~UICR0_IM0;
/* if hardware supports it, pullup D+ and wait for reset */
- let_usb_appear();
+ pullup_on();
}
@@ -2052,10 +2056,10 @@ pxa2xx_udc_irq(int irq, void *_dev, struct pt_regs *r)
if (unlikely(udccr & UDCCR_SUSIR)) {
udc_ack_int_UDCCR(UDCCR_SUSIR);
handled = 1;
- DBG(DBG_VERBOSE, "USB suspend%s\n", is_usb_connected()
+ DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present()
? "" : "+disconnect");
- if (!is_usb_connected())
+ if (!is_vbus_present())
stop_activity(dev, dev->driver);
else if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
@@ -2073,7 +2077,7 @@ pxa2xx_udc_irq(int irq, void *_dev, struct pt_regs *r)
if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
&& dev->driver->resume
- && is_usb_connected())
+ && is_vbus_present())
dev->driver->resume(&dev->gadget);
}
@@ -2509,7 +2513,7 @@ static int __init pxa2xx_udc_probe(struct device *_dev)
udc_disable(dev);
udc_reinit(dev);
- dev->vbus = is_usb_connected();
+ dev->vbus = is_vbus_present();
/* irq setup after old hardware state is cleaned up */
retval = request_irq(IRQ_USB, pxa2xx_udc_irq,
@@ -2555,6 +2559,12 @@ lubbock_fail0:
return 0;
}
+
+static void pxa2xx_udc_shutdown(struct device *_dev)
+{
+ pullup_off();
+}
+
static int __exit pxa2xx_udc_remove(struct device *_dev)
{
struct pxa2xx_udc *dev = dev_get_drvdata(_dev);
@@ -2624,6 +2634,7 @@ static struct device_driver udc_driver = {
.name = "pxa2xx-udc",
.bus = &platform_bus_type,
.probe = pxa2xx_udc_probe,
+ .shutdown = pxa2xx_udc_shutdown,
.remove = __exit_p(pxa2xx_udc_remove),
.suspend = pxa2xx_udc_suspend,
.resume = pxa2xx_udc_resume,
OpenPOWER on IntegriCloud