1 files changed, 165 insertions, 238 deletions

diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index a460e8c..b26c7d68 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -36,9 +36,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <linux/prefetch.h>
+#include <linux/io.h>
 
 #include <asm/byteorder.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
@@ -59,11 +59,6 @@
 #define	DRIVER_DESC	"OMAP UDC driver"
 #define	DRIVER_VERSION	"4 October 2004"
 
-#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
-
-#define OMAP2_DMA_CH(ch)	(((ch) - 1) << 1)
-#define OMAP24XX_DMA(name, ch)	(OMAP24XX_DMA_##name + OMAP2_DMA_CH(ch))
-
 /*
  * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
  * D+ pullup to allow enumeration.  That's too early for the gadget
@@ -87,14 +82,14 @@
 #ifdef	USE_ISO
 static unsigned fifo_mode = 3;
 #else
-static unsigned fifo_mode = 0;
+static unsigned fifo_mode;
 #endif
 
 /* "modprobe omap_udc fifo_mode=42", or else as a kernel
  * boot parameter "omap_udc:fifo_mode=42"
  */
-module_param (fifo_mode, uint, 0);
-MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
+module_param(fifo_mode, uint, 0);
+MODULE_PARM_DESC(fifo_mode, "endpoint configuration");
 
 #ifdef	USE_DMA
 static bool use_dma = 1;
@@ -102,8 +97,8 @@ static bool use_dma = 1;
 /* "modprobe omap_udc use_dma=y", or else as a kernel
  * boot parameter "omap_udc:use_dma=y"
  */
-module_param (use_dma, bool, 0);
-MODULE_PARM_DESC (use_dma, "enable/disable DMA");
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable DMA");
 #else	/* !USE_DMA */
 
 /* save a bit of code */
@@ -111,8 +106,8 @@ MODULE_PARM_DESC (use_dma, "enable/disable DMA");
 #endif	/* !USE_DMA */
 
 
-static const char driver_name [] = "omap_udc";
-static const char driver_desc [] = DRIVER_DESC;
+static const char driver_name[] = "omap_udc";
+static const char driver_desc[] = DRIVER_DESC;
 
 /*-------------------------------------------------------------------------*/
 
@@ -250,7 +245,7 @@ static int omap_ep_disable(struct usb_ep *_ep)
 
 	spin_lock_irqsave(&ep->udc->lock, flags);
 	ep->ep.desc = NULL;
-	nuke (ep, -ESHUTDOWN);
+	nuke(ep, -ESHUTDOWN);
 	ep->ep.maxpacket = ep->maxpacket;
 	ep->has_dma = 0;
 	omap_writew(UDC_SET_HALT, UDC_CTRL);
@@ -271,10 +266,11 @@ omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 	struct omap_req	*req;
 
 	req = kzalloc(sizeof(*req), gfp_flags);
-	if (req) {
-		req->req.dma = DMA_ADDR_INVALID;
-		INIT_LIST_HEAD (&req->queue);
-	}
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
 	return &req->req;
 }
 
@@ -283,8 +279,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req)
 {
 	struct omap_req	*req = container_of(_req, struct omap_req, req);
 
-	if (_req)
-		kfree (req);
+	kfree(req);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -292,6 +287,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req)
 static void
 done(struct omap_ep *ep, struct omap_req *req, int status)
 {
+	struct omap_udc		*udc = ep->udc;
 	unsigned		stopped = ep->stopped;
 
 	list_del_init(&req->queue);
@@ -301,22 +297,9 @@ done(struct omap_ep *ep, struct omap_req *req, int status)
 	else
 		status = req->req.status;
 
-	if (use_dma && ep->has_dma) {
-		if (req->mapped) {
-			dma_unmap_single(ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-			req->req.dma = DMA_ADDR_INVALID;
-			req->mapped = 0;
-		} else
-			dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-	}
+	if (use_dma && ep->has_dma)
+		usb_gadget_unmap_request(&udc->gadget, &req->req,
+				(ep->bEndpointAddress & USB_DIR_IN));
 
 #ifndef	USB_TRACE
 	if (status && status != -ESHUTDOWN)
@@ -364,10 +347,10 @@ write_packet(u8 *buf, struct omap_req *req, unsigned max)
 	return len;
 }
 
-// FIXME change r/w fifo calling convention
+/* FIXME change r/w fifo calling convention */
 
 
-// return:  0 = still running, 1 = completed, negative = errno
+/* return:  0 = still running, 1 = completed, negative = errno */
 static int write_fifo(struct omap_ep *ep, struct omap_req *req)
 {
 	u8		*buf;
@@ -429,7 +412,7 @@ read_packet(u8 *buf, struct omap_req *req, unsigned avail)
 	return len;
 }
 
-// return:  0 = still running, 1 = queue empty, negative = errno
+/* return:  0 = still running, 1 = queue empty, negative = errno */
 static int read_fifo(struct omap_ep *ep, struct omap_req *req)
 {
 	u8		*buf;
@@ -536,12 +519,8 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
 				: OMAP_DMA_SYNC_ELEMENT;
 	int		dma_trigger = 0;
 
-	if (cpu_is_omap24xx())
-		dma_trigger = OMAP24XX_DMA(USB_W2FC_TX0, ep->dma_channel);
-
 	/* measure length in either bytes or packets */
 	if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC)
-			|| (cpu_is_omap24xx() && length < ep->maxpacket)
 			|| (cpu_is_omap15xx() && length < ep->maxpacket)) {
 		txdma_ctrl = UDC_TXN_EOT | length;
 		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
@@ -600,28 +579,14 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
 	int dma_trigger = 0;
 	u16 w;
 
-	if (cpu_is_omap24xx())
-		dma_trigger = OMAP24XX_DMA(USB_W2FC_RX0, ep->dma_channel);
-
-	/* NOTE:  we filtered out "short reads" before, so we know
-	 * the buffer has only whole numbers of packets.
-	 * except MODE SELECT(6) sent the 24 bytes data in OMAP24XX DMA mode
-	 */
-	if (cpu_is_omap24xx() && packets < ep->maxpacket) {
-		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
-				packets, 1, OMAP_DMA_SYNC_ELEMENT,
-				dma_trigger, 0);
-		req->dma_bytes = packets;
-	} else {
-		/* set up this DMA transfer, enable the fifo, start */
-		packets /= ep->ep.maxpacket;
-		packets = min(packets, (unsigned)UDC_RXN_TC + 1);
-		req->dma_bytes = packets * ep->ep.maxpacket;
-		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
-				ep->ep.maxpacket >> 1, packets,
-				OMAP_DMA_SYNC_ELEMENT,
-				dma_trigger, 0);
-	}
+	/* set up this DMA transfer, enable the fifo, start */
+	packets /= ep->ep.maxpacket;
+	packets = min(packets, (unsigned)UDC_RXN_TC + 1);
+	req->dma_bytes = packets * ep->ep.maxpacket;
+	omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
+			ep->ep.maxpacket >> 1, packets,
+			OMAP_DMA_SYNC_ELEMENT,
+			dma_trigger, 0);
 	omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
 		OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
 		0, 0);
@@ -683,7 +648,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
 		}
 		omap_writew(UDC_TXN_DONE, UDC_IRQ_SRC);
 
-		if (!list_empty (&ep->queue)) {
+		if (!list_empty(&ep->queue)) {
 			req = container_of(ep->queue.next,
 					struct omap_req, queue);
 			next_in_dma(ep, req);
@@ -702,7 +667,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
 		}
 		omap_writew(UDC_RXN_EOT, UDC_IRQ_SRC);
 
-		if (!list_empty (&ep->queue)) {
+		if (!list_empty(&ep->queue)) {
 			req = container_of(ep->queue.next,
 					struct omap_req, queue);
 			next_out_dma(ep, req);
@@ -760,10 +725,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 	ep->dma_channel = channel;
 
 	if (is_in) {
-		if (cpu_is_omap24xx())
-			dma_channel = OMAP24XX_DMA(USB_W2FC_TX0, channel);
-		else
-			dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel;
+		dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel;
 		status = omap_request_dma(dma_channel,
 			ep->ep.name, dma_error, ep, &ep->lch);
 		if (status == 0) {
@@ -780,11 +742,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 				0, 0);
 		}
 	} else {
-		if (cpu_is_omap24xx())
-			dma_channel = OMAP24XX_DMA(USB_W2FC_RX0, channel);
-		else
-			dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel;
-
+		dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel;
 		status = omap_request_dma(dma_channel,
 			ep->ep.name, dma_error, ep, &ep->lch);
 		if (status == 0) {
@@ -808,7 +766,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 		omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ);
 
 		/* channel type P: hw synch (fifo) */
-		if (cpu_class_is_omap1() && !cpu_is_omap15xx())
+		if (!cpu_is_omap15xx())
 			omap_set_dma_channel_mode(ep->lch, OMAP_DMA_LCH_P);
 	}
 
@@ -928,13 +886,11 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 	/* this isn't bogus, but OMAP DMA isn't the only hardware to
 	 * have a hard time with partial packet reads...  reject it.
-	 * Except OMAP2 can handle the small packets.
 	 */
 	if (use_dma
 			&& ep->has_dma
 			&& ep->bEndpointAddress != 0
 			&& (ep->bEndpointAddress & USB_DIR_IN) == 0
-			&& !cpu_class_is_omap2()
 			&& (req->req.length % ep->ep.maxpacket) != 0) {
 		DBG("%s, no partial packet OUT reads\n", __func__);
 		return -EMSGSIZE;
@@ -944,26 +900,9 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	if (use_dma && ep->has_dma) {
-		if (req->req.dma == DMA_ADDR_INVALID) {
-			req->req.dma = dma_map_single(
-				ep->udc->gadget.dev.parent,
-				req->req.buf,
-				req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-			req->mapped = 1;
-		} else {
-			dma_sync_single_for_device(
-				ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-			req->mapped = 0;
-		}
-	}
+	if (use_dma && ep->has_dma)
+		usb_gadget_map_request(&udc->gadget, &req->req,
+				(ep->bEndpointAddress & USB_DIR_IN));
 
 	VDBG("%s queue req %p, len %d buf %p\n",
 		ep->ep.name, _req, _req->length, _req->buf);
@@ -984,7 +923,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		int	is_in;
 
 		if (ep->bEndpointAddress == 0) {
-			if (!udc->ep0_pending || !list_empty (&ep->queue)) {
+			if (!udc->ep0_pending || !list_empty(&ep->queue)) {
 				spin_unlock_irqrestore(&udc->lock, flags);
 				return -EL2HLT;
 			}
@@ -1011,7 +950,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 				 * always an IN ... even for IN transfers,
 				 * a weird case which seem to stall OMAP.
 				 */
-				omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+				omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+						UDC_EP_NUM);
 				omap_writew(UDC_CLR_EP, UDC_CTRL);
 				omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
 				omap_writew(UDC_EP_DIR, UDC_EP_NUM);
@@ -1023,7 +963,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 			/* non-empty DATA stage */
 			} else if (is_in) {
-				omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+				omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+						UDC_EP_NUM);
 			} else {
 				if (udc->ep0_setup)
 					goto irq_wait;
@@ -1071,7 +1012,7 @@ static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 	spin_lock_irqsave(&ep->udc->lock, flags);
 
 	/* make sure it's actually queued on this endpoint */
-	list_for_each_entry (req, &ep->queue, queue) {
+	list_for_each_entry(req, &ep->queue, queue) {
 		if (&req->req == _req)
 			break;
 	}
@@ -1178,8 +1119,8 @@ static struct usb_ep_ops omap_ep_ops = {
 	.dequeue	= omap_ep_dequeue,
 
 	.set_halt	= omap_ep_set_halt,
-	// fifo_status ... report bytes in fifo
-	// fifo_flush ... flush fifo
+	/* fifo_status ... report bytes in fifo */
+	/* fifo_flush ... flush fifo */
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1409,7 +1350,7 @@ static void udc_quiesce(struct omap_udc *udc)
 
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 	nuke(&udc->ep[0], -ESHUTDOWN);
-	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list)
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list)
 		nuke(ep, -ESHUTDOWN);
 }
 
@@ -1525,7 +1466,8 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
 				/* read next OUT packet of request, maybe
 				 * reactiviting the fifo; stall on errors.
 				 */
-				if (!req || (stat = read_fifo(ep0, req)) < 0) {
+				stat = read_fifo(ep0, req);
+				if (!req || stat < 0) {
 					omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
 					udc->ep0_pending = 0;
 					stat = 0;
@@ -1658,7 +1600,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
 				/* this has rude side-effects (aborts) and
 				 * can't really work if DMA-IN is active
 				 */
-				DBG("%s host set_halt, NYET \n", ep->name);
+				DBG("%s host set_halt, NYET\n", ep->name);
 				goto do_stall;
 			}
 			use_ep(ep, 0);
@@ -1749,7 +1691,7 @@ delegate:
 			 */
 			udc->ep0_setup = 1;
 			spin_unlock(&udc->lock);
-			status = udc->driver->setup (&udc->gadget, &u.r);
+			status = udc->driver->setup(&udc->gadget, &u.r);
 			spin_lock(&udc->lock);
 			udc->ep0_setup = 0;
 		}
@@ -1794,7 +1736,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
 				VDBG("connect\n");
 				if (!udc->transceiver)
 					pullup_enable(udc);
-				// if (driver->connect) call it
+				/* if (driver->connect) call it */
 			} else if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
 				udc->gadget.speed = USB_SPEED_UNKNOWN;
 				if (!udc->transceiver)
@@ -1826,7 +1768,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
 	}
 	if (change & UDC_SUS) {
 		if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
-			// FIXME tell isp1301 to suspend/resume (?)
+			/* FIXME tell isp1301 to suspend/resume (?) */
 			if (devstat & UDC_SUS) {
 				VDBG("suspend\n");
 				update_otg(udc);
@@ -2029,7 +1971,7 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
 	spin_lock_irqsave(&udc->lock, flags);
 
 	/* handle all non-DMA ISO transfers */
-	list_for_each_entry (ep, &udc->iso, iso) {
+	list_for_each_entry(ep, &udc->iso, iso) {
 		u16		stat;
 		struct omap_req	*req;
 
@@ -2088,15 +2030,11 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
 
 static inline int machine_without_vbus_sense(void)
 {
-	return (machine_is_omap_innovator()
+	return machine_is_omap_innovator()
 		|| machine_is_omap_osk()
-		|| machine_is_omap_apollon()
-#ifndef CONFIG_MACH_OMAP_H4_OTG
-		|| machine_is_omap_h4()
-#endif
 		|| machine_is_sx1()
-		|| cpu_is_omap7xx() /* No known omap7xx boards with vbus sense */
-		);
+		/* No known omap7xx boards with vbus sense */
+		|| cpu_is_omap7xx();
 }
 
 static int omap_udc_start(struct usb_gadget_driver *driver,
@@ -2110,7 +2048,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 	if (!udc)
 		return -ENODEV;
 	if (!driver
-			// FIXME if otg, check:  driver->is_otg
+			/* FIXME if otg, check:  driver->is_otg */
 			|| driver->max_speed < USB_SPEED_FULL
 			|| !bind || !driver->setup)
 		return -EINVAL;
@@ -2122,7 +2060,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 	}
 
 	/* reset state */
-	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
 		ep->irqs = 0;
 		if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
 			continue;
@@ -2160,7 +2098,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 		if (status < 0) {
 			ERR("can't bind to transceiver\n");
 			if (driver->unbind) {
-				driver->unbind (&udc->gadget);
+				driver->unbind(&udc->gadget);
 				udc->gadget.dev.driver = NULL;
 				udc->driver = NULL;
 			}
@@ -2168,9 +2106,9 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 		}
 	} else {
 		if (can_pullup(udc))
-			pullup_enable (udc);
+			pullup_enable(udc);
 		else
-			pullup_disable (udc);
+			pullup_disable(udc);
 	}
 
 	/* boards that don't have VBUS sensing can't autogate 48MHz;
@@ -2229,7 +2167,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver)
 static const char proc_filename[] = "driver/udc";
 
 #define FOURBITS "%s%s%s%s"
-#define EIGHTBITS FOURBITS FOURBITS
+#define EIGHTBITS "%s%s%s%s%s%s%s%s"
 
 static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 {
@@ -2251,12 +2189,21 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 		"\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n",
 		ep->name, buf,
 		ep->double_buf ? "dbuf " : "",
-		({char *s; switch(ep->ackwait){
-		case 0: s = ""; break;
-		case 1: s = "(ackw) "; break;
-		case 2: s = "(ackw2) "; break;
-		default: s = "(?) "; break;
-		} s;}),
+		({ char *s;
+		switch (ep->ackwait) {
+		case 0:
+			s = "";
+			break;
+		case 1:
+			s = "(ackw) ";
+			break;
+		case 2:
+			s = "(ackw2) ";
+			break;
+		default:
+			s = "(?) ";
+			break;
+		} s; }),
 		ep->irqs, stat_flg,
 		(stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "",
 		(stat_flg & UDC_MISS_IN) ? "miss_in " : "",
@@ -2272,10 +2219,10 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 		(stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "",
 		(stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : "");
 
-	if (list_empty (&ep->queue))
+	if (list_empty(&ep->queue))
 		seq_printf(s, "\t(queue empty)\n");
 	else
-		list_for_each_entry (req, &ep->queue, queue) {
+		list_for_each_entry(req, &ep->queue, queue) {
 			unsigned	length = req->req.actual;
 
 			if (use_dma && buf[0]) {
@@ -2293,11 +2240,16 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 static char *trx_mode(unsigned m, int enabled)
 {
 	switch (m) {
-	case 0:		return enabled ? "*6wire" : "unused";
-	case 1:		return "4wire";
-	case 2:		return "3wire";
-	case 3:		return "6wire";
-	default:	return "unknown";
+	case 0:
+		return enabled ? "*6wire" : "unused";
+	case 1:
+		return "4wire";
+	case 2:
+		return "3wire";
+	case 3:
+		return "6wire";
+	default:
+		return "unknown";
 	}
 }
 
@@ -2307,12 +2259,9 @@ static int proc_otg_show(struct seq_file *s)
 	u32		trans = 0;
 	char		*ctrl_name = "(UNKNOWN)";
 
-	/* XXX This needs major revision for OMAP2+ */
 	tmp = omap_readl(OTG_REV);
-	if (cpu_class_is_omap1()) {
-		ctrl_name = "tranceiver_ctrl";
-		trans = omap_readw(USB_TRANSCEIVER_CTRL);
-	}
+	ctrl_name = "tranceiver_ctrl";
+	trans = omap_readw(USB_TRANSCEIVER_CTRL);
 	seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
 		tmp >> 4, tmp & 0xf, ctrl_name, trans);
 	tmp = omap_readw(OTG_SYSCON_1);
@@ -2332,7 +2281,7 @@ static int proc_otg_show(struct seq_file *s)
 			" b_ase_brst=%d hmc=%d\n", tmp,
 		(tmp & OTG_EN) ? " otg_en" : "",
 		(tmp & USBX_SYNCHRO) ? " synchro" : "",
-		// much more SRP stuff
+		/* much more SRP stuff */
 		(tmp & SRP_DATA) ? " srp_data" : "",
 		(tmp & SRP_VBUS) ? " srp_vbus" : "",
 		(tmp & OTG_PADEN) ? " otg_paden" : "",
@@ -2399,14 +2348,12 @@ static int proc_udc_show(struct seq_file *s, void *_)
 		HMC,
 		udc->transceiver
 			? udc->transceiver->label
-			: ((cpu_is_omap1710() || cpu_is_omap24xx())
+			: (cpu_is_omap1710()
 				? "external" : "(none)"));
-	if (cpu_class_is_omap1()) {
-		seq_printf(s, "ULPD control %04x req %04x status %04x\n",
-			omap_readw(ULPD_CLOCK_CTRL),
-			omap_readw(ULPD_SOFT_REQ),
-			omap_readw(ULPD_STATUS_REQ));
-	}
+	seq_printf(s, "ULPD control %04x req %04x status %04x\n",
+		omap_readw(ULPD_CLOCK_CTRL),
+		omap_readw(ULPD_SOFT_REQ),
+		omap_readw(ULPD_STATUS_REQ));
 
 	/* OTG controller registers */
 	if (!cpu_is_omap15xx())
@@ -2422,7 +2369,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
 		(tmp & UDC_SELF_PWR) ? " self_pwr" : "",
 		(tmp & UDC_SOFF_DIS) ? " soff_dis" : "",
 		(tmp & UDC_PULLUP_EN) ? " PULLUP" : "");
-	// syscon2 is write-only
+	/* syscon2 is write-only */
 
 	/* UDC controller registers */
 	if (!(tmp & UDC_PULLUP_EN)) {
@@ -2506,7 +2453,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
 	if (tmp & UDC_ATT) {
 		proc_ep_show(s, &udc->ep[0]);
 		if (tmp & UDC_ADD) {
-			list_for_each_entry (ep, &udc->gadget.ep_list,
+			list_for_each_entry(ep, &udc->gadget.ep_list,
 					ep.ep_list) {
 				if (ep->ep.desc)
 					proc_ep_show(s, ep);
@@ -2557,7 +2504,7 @@ static inline void remove_proc_file(void) {}
  * UDC_SYSCON_1.CFG_LOCK is set can now work.  We won't use that
  * capability yet though.
  */
-static unsigned __init
+static unsigned __devinit
 omap_ep_setup(char *name, u8 addr, u8 type,
 		unsigned buf, unsigned maxp, int dbuf)
 {
@@ -2575,14 +2522,29 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 	/* chip setup ... bit values are same for IN, OUT */
 	if (type == USB_ENDPOINT_XFER_ISOC) {
 		switch (maxp) {
-		case 8:		epn_rxtx = 0 << 12; break;
-		case 16:	epn_rxtx = 1 << 12; break;
-		case 32:	epn_rxtx = 2 << 12; break;
-		case 64:	epn_rxtx = 3 << 12; break;
-		case 128:	epn_rxtx = 4 << 12; break;
-		case 256:	epn_rxtx = 5 << 12; break;
-		case 512:	epn_rxtx = 6 << 12; break;
-		default:	BUG();
+		case 8:
+			epn_rxtx = 0 << 12;
+			break;
+		case 16:
+			epn_rxtx = 1 << 12;
+			break;
+		case 32:
+			epn_rxtx = 2 << 12;
+			break;
+		case 64:
+			epn_rxtx = 3 << 12;
+			break;
+		case 128:
+			epn_rxtx = 4 << 12;
+			break;
+		case 256:
+			epn_rxtx = 5 << 12;
+			break;
+		case 512:
+			epn_rxtx = 6 << 12;
+			break;
+		default:
+			BUG();
 		}
 		epn_rxtx |= UDC_EPN_RX_ISO;
 		dbuf = 1;
@@ -2591,15 +2553,24 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 		 * and ignored for PIO-IN on newer chips
 		 * (for more reliable behavior)
 		 */
-		if (!use_dma || cpu_is_omap15xx() || cpu_is_omap24xx())
+		if (!use_dma || cpu_is_omap15xx())
 			dbuf = 0;
 
 		switch (maxp) {
-		case 8:		epn_rxtx = 0 << 12; break;
-		case 16:	epn_rxtx = 1 << 12; break;
-		case 32:	epn_rxtx = 2 << 12; break;
-		case 64:	epn_rxtx = 3 << 12; break;
-		default:	BUG();
+		case 8:
+			epn_rxtx = 0 << 12;
+			break;
+		case 16:
+			epn_rxtx = 1 << 12;
+			break;
+		case 32:
+			epn_rxtx = 2 << 12;
+			break;
+		case 64:
+			epn_rxtx = 3 << 12;
+			break;
+		default:
+			BUG();
 		}
 		if (dbuf && addr)
 			epn_rxtx |= UDC_EPN_RX_DB;
@@ -2639,7 +2610,7 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 	ep->ep.name = ep->name;
 	ep->ep.ops = &omap_ep_ops;
 	ep->ep.maxpacket = ep->maxpacket = maxp;
-	list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list);
+	list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 
 	return buf;
 }
@@ -2647,11 +2618,11 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 static void omap_udc_release(struct device *dev)
 {
 	complete(udc->done);
-	kfree (udc);
+	kfree(udc);
 	udc = NULL;
 }
 
-static int __init
+static int __devinit
 omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 {
 	unsigned	tmp, buf;
@@ -2665,13 +2636,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 	omap_writew(0, UDC_TXDMA_CFG);
 
 	/* UDC_PULLUP_EN gates the chip clock */
-	// OTG_SYSCON_1 |= DEV_IDLE_EN;
+	/* OTG_SYSCON_1 |= DEV_IDLE_EN; */
 
 	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
 	if (!udc)
 		return -ENOMEM;
 
-	spin_lock_init (&udc->lock);
+	spin_lock_init(&udc->lock);
 
 	udc->gadget.ops = &omap_gadget_ops;
 	udc->gadget.ep0 = &udc->ep[0].ep;
@@ -2701,13 +2672,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 		omap_writew(0, UDC_EP_TX(tmp));
 	}
 
-#define OMAP_BULK_EP(name,addr) \
+#define OMAP_BULK_EP(name, addr) \
 	buf = omap_ep_setup(name "-bulk", addr, \
 			USB_ENDPOINT_XFER_BULK, buf, 64, 1);
-#define OMAP_INT_EP(name,addr, maxp) \
+#define OMAP_INT_EP(name, addr, maxp) \
 	buf = omap_ep_setup(name "-int", addr, \
 			USB_ENDPOINT_XFER_INT, buf, maxp, 0);
-#define OMAP_ISO_EP(name,addr, maxp) \
+#define OMAP_ISO_EP(name, addr, maxp) \
 	buf = omap_ep_setup(name "-iso", addr, \
 			USB_ENDPOINT_XFER_ISOC, buf, maxp, 1);
 
@@ -2788,15 +2759,18 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 	return 0;
 }
 
-static int __init omap_udc_probe(struct platform_device *pdev)
+static int __devinit omap_udc_probe(struct platform_device *pdev)
 {
 	int			status = -ENODEV;
 	int			hmc;
 	struct usb_phy		*xceiv = NULL;
 	const char		*type = NULL;
 	struct omap_usb_config	*config = pdev->dev.platform_data;
-	struct clk		*dc_clk;
-	struct clk		*hhc_clk;
+	struct clk		*dc_clk = NULL;
+	struct clk		*hhc_clk = NULL;
+
+	if (cpu_is_omap7xx())
+		use_dma = 0;
 
 	/* NOTE:  "knows" the order of the resources! */
 	if (!request_mem_region(pdev->resource[0].start,
@@ -2816,16 +2790,6 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		udelay(100);
 	}
 
-	if (cpu_is_omap24xx()) {
-		dc_clk = clk_get(&pdev->dev, "usb_fck");
-		hhc_clk = clk_get(&pdev->dev, "usb_l4_ick");
-		BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
-		/* can't use omap_udc_enable_clock yet */
-		clk_enable(dc_clk);
-		clk_enable(hhc_clk);
-		udelay(100);
-	}
-
 	if (cpu_is_omap7xx()) {
 		dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
 		hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck");
@@ -2875,14 +2839,6 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 
 		hmc = HMC_1610;
 
-		if (cpu_is_omap24xx()) {
-			/* this could be transceiverless in one of the
-			 * "we don't need to know" modes.
-			 */
-			type = "external";
-			goto known;
-		}
-
 		switch (hmc) {
 		case 0:			/* POWERUP DEFAULT == 0 */
 		case 4:
@@ -2921,16 +2877,16 @@ bad_on_1710:
 			goto cleanup0;
 		}
 	}
-known:
+
 	INFO("hmc mode %d, %s transceiver\n", hmc, type);
 
 	/* a "gadget" abstracts/virtualizes the controller */
 	status = omap_udc_setup(pdev, xceiv);
-	if (status) {
+	if (status)
 		goto cleanup0;
-	}
+
 	xceiv = NULL;
-	// "udc" is now valid
+	/* "udc" is now valid */
 	pullup_disable(udc);
 #if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	udc->gadget.is_otg = (config->otg != 0);
@@ -2944,7 +2900,7 @@ known:
 
 	/* USB general purpose IRQ:  ep0, state changes, dma, etc */
 	status = request_irq(pdev->resource[1].start, omap_udc_irq,
-			IRQF_SAMPLE_RANDOM, driver_name, udc);
+			0, driver_name, udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[1].start, status);
@@ -2953,7 +2909,7 @@ known:
 
 	/* USB "non-iso" IRQ (PIO for all but ep0) */
 	status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
-			IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
+			0, "omap_udc pio", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[2].start, status);
@@ -2975,16 +2931,6 @@ known:
 		clk_disable(dc_clk);
 	}
 
-	if (cpu_is_omap24xx()) {
-		udc->dc_clk = dc_clk;
-		udc->hhc_clk = hhc_clk;
-		/* FIXME OMAP2 don't release hhc & dc clock */
-#if 0
-		clk_disable(hhc_clk);
-		clk_disable(dc_clk);
-#endif
-	}
-
 	create_proc_file();
 	status = device_add(&udc->gadget.dev);
 	if (status)
@@ -3006,14 +2952,14 @@ cleanup2:
 	free_irq(pdev->resource[1].start, udc);
 
 cleanup1:
-	kfree (udc);
+	kfree(udc);
 	udc = NULL;
 
 cleanup0:
 	if (xceiv)
 		usb_put_transceiver(xceiv);
 
-	if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) {
+	if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
 		clk_disable(hhc_clk);
 		clk_disable(dc_clk);
 		clk_put(hhc_clk);
@@ -3026,7 +2972,7 @@ cleanup0:
 	return status;
 }
 
-static int __exit omap_udc_remove(struct platform_device *pdev)
+static int __devexit omap_udc_remove(struct platform_device *pdev)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
 
@@ -3111,7 +3057,8 @@ static int omap_udc_resume(struct platform_device *dev)
 /*-------------------------------------------------------------------------*/
 
 static struct platform_driver udc_driver = {
-	.remove		= __exit_p(omap_udc_remove),
+	.probe		= omap_udc_probe,
+	.remove		= __devexit_p(omap_udc_remove),
 	.suspend	= omap_udc_suspend,
 	.resume		= omap_udc_resume,
 	.driver		= {
@@ -3120,27 +3067,7 @@ static struct platform_driver udc_driver = {
 	},
 };
 
-static int __init udc_init(void)
-{
-	/* Disable DMA for omap7xx -- it doesn't work right. */
-	if (cpu_is_omap7xx())
-		use_dma = 0;
-
-	INFO("%s, version: " DRIVER_VERSION
-#ifdef	USE_ISO
-		" (iso)"
-#endif
-		"%s\n", driver_desc,
-		use_dma ?  " (dma)" : "");
-	return platform_driver_probe(&udc_driver, omap_udc_probe);
-}
-module_init(udc_init);
-
-static void __exit udc_exit(void)
-{
-	platform_driver_unregister(&udc_driver);
-}
-module_exit(udc_exit);
+module_platform_driver(udc_driver);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");