diff options
Diffstat (limited to 'drivers/usb/gadget/f_obex.c')
| -rw-r--r-- | drivers/usb/gadget/f_obex.c | 446 |
1 files changed, 446 insertions, 0 deletions
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c new file mode 100644 index 0000000..86241b2 --- /dev/null +++ b/drivers/usb/gadget/f_obex.c @@ -0,0 +1,446 @@ +/* + * f_obex.c -- USB CDC OBEX function driver + * + * Copyright (C) 2008 Nokia Corporation + * Contact: Felipe Balbi <felipe.balbi@nokia.com> + * + * Based on f_acm.c by Al Borchers and David Brownell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* #define VERBOSE_DEBUG */ + +#include <linux/kernel.h> +#include <linux/utsname.h> +#include <linux/device.h> + +#include "u_serial.h" +#include "gadget_chips.h" + + +/* + * This CDC OBEX function support just packages a TTY-ish byte stream. + * A user mode server will put it into "raw" mode and handle all the + * relevant protocol details ... this is just a kernel passthrough. + * + * REVISIT this driver shouldn't actually activate before that user mode + * server is ready to respond! When the "serial gadget" utility code + * adds open/close notifications, this driver should use them with new + * (TBS) composite gadget hooks that wrap usb_gadget_disconnect() and + * usb_gadget_connect() calls with refcounts ... disconnect() when we + * bind, then connect() when the user server code is ready to respond. + */ + +struct obex_ep_descs { + struct usb_endpoint_descriptor *obex_in; + struct usb_endpoint_descriptor *obex_out; +}; + +struct f_obex { + struct gserial port; + u8 ctrl_id; + u8 data_id; + u8 port_num; + + struct obex_ep_descs fs; + struct obex_ep_descs hs; +}; + +static inline struct f_obex *func_to_obex(struct usb_function *f) +{ + return container_of(f, struct f_obex, port.func); +} + +/*-------------------------------------------------------------------------*/ + +#define OBEX_CTRL_IDX 0 +#define OBEX_DATA_IDX 1 + +static struct usb_string obex_string_defs[] = { + [OBEX_CTRL_IDX].s = "CDC Object Exchange (OBEX)", + [OBEX_DATA_IDX].s = "CDC OBEX Data", + { }, /* end of list */ +}; + +static struct usb_gadget_strings obex_string_table = { + .language = 0x0409, /* en-US */ + .strings = obex_string_defs, +}; + +static struct usb_gadget_strings *obex_strings[] = { + &obex_string_table, + NULL, +}; + +/*-------------------------------------------------------------------------*/ + +static struct usb_interface_descriptor obex_control_intf __initdata = { + .bLength = sizeof(obex_control_intf), + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_OBEX, +}; + +static struct usb_interface_descriptor obex_data_nop_intf __initdata = { + .bLength = sizeof(obex_data_nop_intf), + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 1, + + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = USB_CLASS_CDC_DATA, +}; + +static struct usb_interface_descriptor obex_data_intf __initdata = { + .bLength = sizeof(obex_data_intf), + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 2, + + .bAlternateSetting = 1, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, +}; + +static struct usb_cdc_header_desc obex_cdc_header_desc __initdata = { + .bLength = sizeof(obex_cdc_header_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_HEADER_TYPE, + .bcdCDC = __constant_cpu_to_le16(0x0120), +}; + +static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = { + .bLength = sizeof(obex_cdc_union_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_UNION_TYPE, + .bMasterInterface0 = 1, + .bSlaveInterface0 = 2, +}; + +static struct usb_cdc_obex_desc obex_desc __initdata = { + .bLength = sizeof(obex_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_OBEX_TYPE, + .bcdVersion = __constant_cpu_to_le16(0x0100), +}; + +/* High-Speed Support */ + +static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16(512), +}; + +static struct usb_descriptor_header *hs_function[] __initdata = { + (struct usb_descriptor_header *) &obex_control_intf, + (struct usb_descriptor_header *) &obex_cdc_header_desc, + (struct usb_descriptor_header *) &obex_desc, + (struct usb_descriptor_header *) &obex_cdc_union_desc, + + (struct usb_descriptor_header *) &obex_data_nop_intf, + (struct usb_descriptor_header *) &obex_data_intf, + (struct usb_descriptor_header *) &obex_hs_ep_in_desc, + (struct usb_descriptor_header *) &obex_hs_ep_out_desc, + NULL, +}; + +/* Full-Speed Support */ + +static struct usb_endpoint_descriptor obex_fs_ep_in_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_endpoint_descriptor obex_fs_ep_out_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_descriptor_header *fs_function[] __initdata = { + (struct usb_descriptor_header *) &obex_control_intf, + (struct usb_descriptor_header *) &obex_cdc_header_desc, + (struct usb_descriptor_header *) &obex_desc, + (struct usb_descriptor_header *) &obex_cdc_union_desc, + + (struct usb_descriptor_header *) &obex_data_nop_intf, + (struct usb_descriptor_header *) &obex_data_intf, + (struct usb_descriptor_header *) &obex_fs_ep_in_desc, + (struct usb_descriptor_header *) &obex_fs_ep_out_desc, + NULL, +}; + +/*-------------------------------------------------------------------------*/ + +static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt) +{ + struct f_obex *obex = func_to_obex(f); + struct usb_composite_dev *cdev = f->config->cdev; + + if (intf == obex->ctrl_id) { + if (alt != 0) + goto fail; + /* NOP */ + DBG(cdev, "reset obex ttyGS%d control\n", obex->port_num); + + } else if (intf == obex->data_id) { + if (alt > 1) + goto fail; + + if (obex->port.in->driver_data) { + DBG(cdev, "reset obex ttyGS%d\n", obex->port_num); + gserial_disconnect(&obex->port); + } + + if (!obex->port.in_desc) { + DBG(cdev, "init obex ttyGS%d\n", obex->port_num); + obex->port.in_desc = ep_choose(cdev->gadget, + obex->hs.obex_in, obex->fs.obex_in); + obex->port.out_desc = ep_choose(cdev->gadget, + obex->hs.obex_out, obex->fs.obex_out); + } + + if (alt == 1) { + DBG(cdev, "activate obex ttyGS%d\n", obex->port_num); + gserial_connect(&obex->port, obex->port_num); + } + + } else + goto fail; + + return 0; + +fail: + return -EINVAL; +} + +static int obex_get_alt(struct usb_function *f, unsigned intf) +{ + struct f_obex *obex = func_to_obex(f); + + if (intf == obex->ctrl_id) + return 0; + + return obex->port.in->driver_data ? 1 : 0; +} + +static void obex_disable(struct usb_function *f) +{ + struct f_obex *obex = func_to_obex(f); + struct usb_composite_dev *cdev = f->config->cdev; + + DBG(cdev, "obex ttyGS%d disable\n", obex->port_num); + gserial_disconnect(&obex->port); +} + +/*-------------------------------------------------------------------------*/ + +static int __init +obex_bind(struct usb_configuration *c, struct usb_function *f) +{ + struct usb_composite_dev *cdev = c->cdev; + struct f_obex *obex = func_to_obex(f); + int status; + struct usb_ep *ep; + + /* allocate instance-specific interface IDs, and patch descriptors */ + + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + obex->ctrl_id = status; + + obex_control_intf.bInterfaceNumber = status; + obex_cdc_union_desc.bMasterInterface0 = status; + + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + obex->data_id = status; + + obex_data_nop_intf.bInterfaceNumber = status; + obex_data_intf.bInterfaceNumber = status; + obex_cdc_union_desc.bSlaveInterface0 = status; + + /* allocate instance-specific endpoints */ + + ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_in_desc); + if (!ep) + goto fail; + obex->port.in = ep; + ep->driver_data = cdev; /* claim */ + + ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_out_desc); + if (!ep) + goto fail; + obex->port.out = ep; + ep->driver_data = cdev; /* claim */ + + /* copy descriptors, and track endpoint copies */ + f->descriptors = usb_copy_descriptors(fs_function); + + obex->fs.obex_in = usb_find_endpoint(fs_function, + f->descriptors, &obex_fs_ep_in_desc); + obex->fs.obex_out = usb_find_endpoint(fs_function, + f->descriptors, &obex_fs_ep_out_desc); + + /* support all relevant hardware speeds... we expect that when + * hardware is dual speed, all bulk-capable endpoints work at + * both speeds + */ + if (gadget_is_dualspeed(c->cdev->gadget)) { + + obex_hs_ep_in_desc.bEndpointAddress = + obex_fs_ep_in_desc.bEndpointAddress; + obex_hs_ep_out_desc.bEndpointAddress = + obex_fs_ep_out_desc.bEndpointAddress; + + /* copy descriptors, and track endpoint copies */ + f->hs_descriptors = usb_copy_descriptors(hs_function); + + obex->hs.obex_in = usb_find_endpoint(hs_function, + f->descriptors, &obex_hs_ep_in_desc); + obex->hs.obex_out = usb_find_endpoint(hs_function, + f->descriptors, &obex_hs_ep_out_desc); + } + + DBG(cdev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n", + obex->port_num, + gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", + obex->port.in->name, obex->port.out->name); + + return 0; + +fail: + /* we might as well release our claims on endpoints */ + if (obex->port.out) + obex->port.out->driver_data = NULL; + if (obex->port.in) + obex->port.in->driver_data = NULL; + + ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status); + + return status; +} + +static void +obex_unbind(struct usb_configuration *c, struct usb_function *f) +{ + if (gadget_is_dualspeed(c->cdev->gadget)) + usb_free_descriptors(f->hs_descriptors); + usb_free_descriptors(f->descriptors); + kfree(func_to_obex(f)); +} + +/* Some controllers can't support CDC OBEX ... */ +static inline bool can_support_obex(struct usb_configuration *c) +{ + /* Since the first interface is a NOP, we can ignore the + * issue of multi-interface support on most controllers. + * + * Altsettings are mandatory, however... + */ + if (!gadget_supports_altsettings(c->cdev->gadget)) + return false; + + /* everything else is *probably* fine ... */ + return true; +} + +/** + * obex_bind_config - add a CDC OBEX function to a configuration + * @c: the configuration to support the CDC OBEX instance + * @port_num: /dev/ttyGS* port this interface will use + * Context: single threaded during gadget setup + * + * Returns zero on success, else negative errno. + * + * Caller must have called @gserial_setup() with enough ports to + * handle all the ones it binds. Caller is also responsible + * for calling @gserial_cleanup() before module unload. + */ +int __init obex_bind_config(struct usb_configuration *c, u8 port_num) +{ + struct f_obex *obex; + int status; + + if (!can_support_obex(c)) + return -EINVAL; + + /* maybe allocate device-global string IDs, and patch descriptors */ + if (obex_string_defs[OBEX_CTRL_IDX].id == 0) { + status = usb_string_id(c->cdev); + if (status < 0) + return status; + obex_string_defs[OBEX_CTRL_IDX].id = status; + + obex_control_intf.iInterface = status; + + status = usb_string_id(c->cdev); + if (status < 0) + return status; + obex_string_defs[OBEX_DATA_IDX].id = status; + + obex_data_nop_intf.iInterface = + obex_data_intf.iInterface = status; + } + + /* allocate and initialize one new instance */ + obex = kzalloc(sizeof *obex, GFP_KERNEL); + if (!obex) + return -ENOMEM; + + obex->port_num = port_num; + + obex->port.func.name = "obex"; + obex->port.func.strings = obex_strings; + /* descriptors are per-instance copies */ + obex->port.func.bind = obex_bind; + obex->port.func.unbind = obex_unbind; + obex->port.func.set_alt = obex_set_alt; + obex->port.func.get_alt = obex_get_alt; + obex->port.func.disable = obex_disable; + + status = usb_add_function(c, &obex->port.func); + if (status) + kfree(obex); + + return status; +} + +MODULE_AUTHOR("Felipe Balbi"); +MODULE_LICENSE("GPL"); |
