diff options
Diffstat (limited to 'drivers/usb/early/ehci-dbgp.c')
| -rw-r--r-- | drivers/usb/early/ehci-dbgp.c | 996 |
1 files changed, 996 insertions, 0 deletions
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c new file mode 100644 index 0000000..1206a26 --- /dev/null +++ b/drivers/usb/early/ehci-dbgp.c @@ -0,0 +1,996 @@ +/* + * Standalone EHCI usb debug driver + * + * Originally written by: + * Eric W. Biederman" <ebiederm@xmission.com> and + * Yinghai Lu <yhlu.kernel@gmail.com> + * + * Changes for early/late printk and HW errata: + * Jason Wessel <jason.wessel@windriver.com> + * Copyright (C) 2009 Wind River Systems, Inc. + * + */ + +#include <linux/console.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/pci_regs.h> +#include <linux/pci_ids.h> +#include <linux/usb/ch9.h> +#include <linux/usb/ehci_def.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/pci-direct.h> +#include <asm/fixmap.h> + +/* The code here is intended to talk directly to the EHCI debug port + * and does not require that you have any kind of USB host controller + * drivers or USB device drivers compiled into the kernel. + * + * If you make a change to anything in here, the following test cases + * need to pass where a USB debug device works in the following + * configurations. + * + * 1. boot args: earlyprintk=dbgp + * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set + * o kernel compiled with CONFIG_USB_EHCI_HCD=y + * 2. boot args: earlyprintk=dbgp,keep + * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set + * o kernel compiled with CONFIG_USB_EHCI_HCD=y + * 3. boot args: earlyprintk=dbgp console=ttyUSB0 + * o kernel has CONFIG_USB_EHCI_HCD=y and + * CONFIG_USB_SERIAL_DEBUG=y + * 4. boot args: earlyprintk=vga,dbgp + * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set + * o kernel compiled with CONFIG_USB_EHCI_HCD=y + * + * For the 4th configuration you can turn on or off the DBGP_DEBUG + * such that you can debug the dbgp device's driver code. + */ + +static int dbgp_phys_port = 1; + +static struct ehci_caps __iomem *ehci_caps; +static struct ehci_regs __iomem *ehci_regs; +static struct ehci_dbg_port __iomem *ehci_debug; +static int dbgp_not_safe; /* Cannot use debug device during ehci reset */ +static unsigned int dbgp_endpoint_out; + +struct ehci_dev { + u32 bus; + u32 slot; + u32 func; +}; + +static struct ehci_dev ehci_dev; + +#define USB_DEBUG_DEVNUM 127 + +#define DBGP_DATA_TOGGLE 0x8800 + +#ifdef DBGP_DEBUG +#define dbgp_printk printk +static void dbgp_ehci_status(char *str) +{ + if (!ehci_debug) + return; + dbgp_printk("dbgp: %s\n", str); + dbgp_printk(" Debug control: %08x", readl(&ehci_debug->control)); + dbgp_printk(" ehci cmd : %08x", readl(&ehci_regs->command)); + dbgp_printk(" ehci conf flg: %08x\n", + readl(&ehci_regs->configured_flag)); + dbgp_printk(" ehci status : %08x", readl(&ehci_regs->status)); + dbgp_printk(" ehci portsc : %08x\n", + readl(&ehci_regs->port_status[dbgp_phys_port - 1])); +} +#else +static inline void dbgp_ehci_status(char *str) { } +static inline void dbgp_printk(const char *fmt, ...) { } +#endif + +static inline u32 dbgp_pid_update(u32 x, u32 tok) +{ + return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff); +} + +static inline u32 dbgp_len_update(u32 x, u32 len) +{ + return (x & ~0x0f) | (len & 0x0f); +} + +/* + * USB Packet IDs (PIDs) + */ + +/* token */ +#define USB_PID_OUT 0xe1 +#define USB_PID_IN 0x69 +#define USB_PID_SOF 0xa5 +#define USB_PID_SETUP 0x2d +/* handshake */ +#define USB_PID_ACK 0xd2 +#define USB_PID_NAK 0x5a +#define USB_PID_STALL 0x1e +#define USB_PID_NYET 0x96 +/* data */ +#define USB_PID_DATA0 0xc3 +#define USB_PID_DATA1 0x4b +#define USB_PID_DATA2 0x87 +#define USB_PID_MDATA 0x0f +/* Special */ +#define USB_PID_PREAMBLE 0x3c +#define USB_PID_ERR 0x3c +#define USB_PID_SPLIT 0x78 +#define USB_PID_PING 0xb4 +#define USB_PID_UNDEF_0 0xf0 + +#define USB_PID_DATA_TOGGLE 0x88 +#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE) + +#define PCI_CAP_ID_EHCI_DEBUG 0xa + +#define HUB_ROOT_RESET_TIME 50 /* times are in msec */ +#define HUB_SHORT_RESET_TIME 10 +#define HUB_LONG_RESET_TIME 200 +#define HUB_RESET_TIMEOUT 500 + +#define DBGP_MAX_PACKET 8 +#define DBGP_TIMEOUT (250 * 1000) + +static int dbgp_wait_until_complete(void) +{ + u32 ctrl; + int loop = DBGP_TIMEOUT; + + do { + ctrl = readl(&ehci_debug->control); + /* Stop when the transaction is finished */ + if (ctrl & DBGP_DONE) + break; + udelay(1); + } while (--loop > 0); + + if (!loop) + return -DBGP_TIMEOUT; + + /* + * Now that we have observed the completed transaction, + * clear the done bit. + */ + writel(ctrl | DBGP_DONE, &ehci_debug->control); + return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl); +} + +static inline void dbgp_mdelay(int ms) +{ + int i; + + while (ms--) { + for (i = 0; i < 1000; i++) + outb(0x1, 0x80); + } +} + +static void dbgp_breath(void) +{ + /* Sleep to give the debug port a chance to breathe */ +} + +static int dbgp_wait_until_done(unsigned ctrl) +{ + u32 pids, lpid; + int ret; + int loop = 3; + +retry: + writel(ctrl | DBGP_GO, &ehci_debug->control); + ret = dbgp_wait_until_complete(); + pids = readl(&ehci_debug->pids); + lpid = DBGP_PID_GET(pids); + + if (ret < 0) { + /* A -DBGP_TIMEOUT failure here means the device has + * failed, perhaps because it was unplugged, in which + * case we do not want to hang the system so the dbgp + * will be marked as unsafe to use. EHCI reset is the + * only way to recover if you unplug the dbgp device. + */ + if (ret == -DBGP_TIMEOUT && !dbgp_not_safe) + dbgp_not_safe = 1; + return ret; + } + + /* + * If the port is getting full or it has dropped data + * start pacing ourselves, not necessary but it's friendly. + */ + if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET)) + dbgp_breath(); + + /* If I get a NACK reissue the transmission */ + if (lpid == USB_PID_NAK) { + if (--loop > 0) + goto retry; + } + + return ret; +} + +static inline void dbgp_set_data(const void *buf, int size) +{ + const unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = hi = 0; + for (i = 0; i < 4 && i < size; i++) + lo |= bytes[i] << (8*i); + for (; i < 8 && i < size; i++) + hi |= bytes[i] << (8*(i - 4)); + writel(lo, &ehci_debug->data03); + writel(hi, &ehci_debug->data47); +} + +static inline void dbgp_get_data(void *buf, int size) +{ + unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = readl(&ehci_debug->data03); + hi = readl(&ehci_debug->data47); + for (i = 0; i < 4 && i < size; i++) + bytes[i] = (lo >> (8*i)) & 0xff; + for (; i < 8 && i < size; i++) + bytes[i] = (hi >> (8*(i - 4))) & 0xff; +} + +static int dbgp_out(u32 addr, const char *bytes, int size) +{ + u32 pids, ctrl; + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_OUT); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + dbgp_set_data(bytes, size); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + return dbgp_wait_until_done(ctrl); +} + +static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, + const char *bytes, int size) +{ + int ret; + int loops = 5; + u32 addr; + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); +try_again: + if (loops--) { + ret = dbgp_out(addr, bytes, size); + if (ret == -DBGP_ERR_BAD) { + int try_loops = 3; + do { + /* Emit a dummy packet to re-sync communication + * with the debug device */ + if (dbgp_out(addr, "12345678", 8) >= 0) { + udelay(2); + goto try_again; + } + } while (try_loops--); + } + } + + return ret; +} + +static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, + int size) +{ + u32 pids, addr, ctrl; + int ret; + + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_IN); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl &= ~DBGP_OUT; + ctrl |= DBGP_GO; + + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + if (size > ret) + size = ret; + dbgp_get_data(data, size); + return ret; +} + +static int dbgp_control_msg(unsigned devnum, int requesttype, + int request, int value, int index, void *data, int size) +{ + u32 pids, addr, ctrl; + struct usb_ctrlrequest req; + int read; + int ret; + + read = (requesttype & USB_DIR_IN) != 0; + if (size > (read ? DBGP_MAX_PACKET:0)) + return -1; + + /* Compute the control message */ + req.bRequestType = requesttype; + req.bRequest = request; + req.wValue = cpu_to_le16(value); + req.wIndex = cpu_to_le16(index); + req.wLength = cpu_to_le16(size); + + pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP); + addr = DBGP_EPADDR(devnum, 0); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, sizeof(req)); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + /* Send the setup message */ + dbgp_set_data(&req, sizeof(req)); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + /* Read the result */ + return dbgp_bulk_read(devnum, 0, data, size); +} + + +/* Find a PCI capability */ +static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap) +{ + u8 pos; + int bytes; + + if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + PCI_STATUS_CAP_LIST)) + return 0; + + pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { + u8 id; + + pos &= ~3; + id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + if (id == 0xff) + break; + if (id == cap) + return pos; + + pos = read_pci_config_byte(num, slot, func, + pos+PCI_CAP_LIST_NEXT); + } + return 0; +} + +static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func) +{ + u32 class; + + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); + if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI) + return 0; + + return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG); +} + +static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc) +{ + u32 bus, slot, func; + + for (bus = 0; bus < 256; bus++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + unsigned cap; + + cap = __find_dbgp(bus, slot, func); + + if (!cap) + continue; + if (ehci_num-- != 0) + continue; + *rbus = bus; + *rslot = slot; + *rfunc = func; + return cap; + } + } + } + return 0; +} + +static int dbgp_ehci_startup(void) +{ + u32 ctrl, cmd, status; + int loop; + + /* Claim ownership, but do not enable yet */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_OWNER; + ctrl &= ~(DBGP_ENABLED | DBGP_INUSE); + writel(ctrl, &ehci_debug->control); + udelay(1); + + dbgp_ehci_status("EHCI startup"); + /* Start the ehci running */ + cmd = readl(&ehci_regs->command); + cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET); + cmd |= CMD_RUN; + writel(cmd, &ehci_regs->command); + + /* Ensure everything is routed to the EHCI */ + writel(FLAG_CF, &ehci_regs->configured_flag); + + /* Wait until the controller is no longer halted */ + loop = 10; + do { + status = readl(&ehci_regs->status); + if (!(status & STS_HALT)) + break; + udelay(1); + } while (--loop > 0); + + if (!loop) { + dbgp_printk("ehci can not be started\n"); + return -ENODEV; + } + dbgp_printk("ehci started\n"); + return 0; +} + +static int dbgp_ehci_controller_reset(void) +{ + int loop = 250 * 1000; + u32 cmd; + + /* Reset the EHCI controller */ + cmd = readl(&ehci_regs->command); + cmd |= CMD_RESET; + writel(cmd, &ehci_regs->command); + do { + cmd = readl(&ehci_regs->command); + } while ((cmd & CMD_RESET) && (--loop > 0)); + + if (!loop) { + dbgp_printk("can not reset ehci\n"); + return -1; + } + dbgp_ehci_status("ehci reset done"); + return 0; +} +static int ehci_wait_for_port(int port); +/* Return 0 on success + * Return -ENODEV for any general failure + * Return -EIO if wait for port fails + */ +int dbgp_external_startup(void) +{ + int devnum; + struct usb_debug_descriptor dbgp_desc; + int ret; + u32 ctrl, portsc, cmd; + int dbg_port = dbgp_phys_port; + int tries = 3; + int reset_port_tries = 1; + int try_hard_once = 1; + +try_port_reset_again: + ret = dbgp_ehci_startup(); + if (ret) + return ret; + + /* Wait for a device to show up in the debug port */ + ret = ehci_wait_for_port(dbg_port); + if (ret < 0) { + portsc = readl(&ehci_regs->port_status[dbg_port - 1]); + if (!(portsc & PORT_CONNECT) && try_hard_once) { + /* Last ditch effort to try to force enable + * the debug device by using the packet test + * ehci command to try and wake it up. */ + try_hard_once = 0; + cmd = readl(&ehci_regs->command); + cmd &= ~CMD_RUN; + writel(cmd, &ehci_regs->command); + portsc = readl(&ehci_regs->port_status[dbg_port - 1]); + portsc |= PORT_TEST_PKT; + writel(portsc, &ehci_regs->port_status[dbg_port - 1]); + dbgp_ehci_status("Trying to force debug port online"); + mdelay(50); + dbgp_ehci_controller_reset(); + goto try_port_reset_again; + } else if (reset_port_tries--) { + goto try_port_reset_again; + } + dbgp_printk("No device found in debug port\n"); + return -EIO; + } + dbgp_ehci_status("wait for port done"); + + /* Enable the debug port */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_CLAIM; + writel(ctrl, &ehci_debug->control); + ctrl = readl(&ehci_debug->control); + if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) { + dbgp_printk("No device in debug port\n"); + writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control); + return -ENODEV; + } + dbgp_ehci_status("debug ported enabled"); + + /* Completely transfer the debug device to the debug controller */ + portsc = readl(&ehci_regs->port_status[dbg_port - 1]); + portsc &= ~PORT_PE; + writel(portsc, &ehci_regs->port_status[dbg_port - 1]); + + dbgp_mdelay(100); + +try_again: + /* Find the debug device and make it device number 127 */ + for (devnum = 0; devnum <= 127; devnum++) { + ret = dbgp_control_msg(devnum, + USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0, + &dbgp_desc, sizeof(dbgp_desc)); + if (ret > 0) + break; + } + if (devnum > 127) { + dbgp_printk("Could not find attached debug device\n"); + goto err; + } + if (ret < 0) { + dbgp_printk("Attached device is not a debug device\n"); + goto err; + } + dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint; + + /* Move the device to 127 if it isn't already there */ + if (devnum != USB_DEBUG_DEVNUM) { + ret = dbgp_control_msg(devnum, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); + if (ret < 0) { + dbgp_printk("Could not move attached device to %d\n", + USB_DEBUG_DEVNUM); + goto err; + } + devnum = USB_DEBUG_DEVNUM; + dbgp_printk("debug device renamed to 127\n"); + } + + /* Enable the debug interface */ + ret = dbgp_control_msg(USB_DEBUG_DEVNUM, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0); + if (ret < 0) { + dbgp_printk(" Could not enable the debug device\n"); + goto err; + } + dbgp_printk("debug interface enabled\n"); + /* Perform a small write to get the even/odd data state in sync + */ + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1); + if (ret < 0) { + dbgp_printk("dbgp_bulk_write failed: %d\n", ret); + goto err; + } + dbgp_printk("small write doned\n"); + dbgp_not_safe = 0; + + return 0; +err: + if (tries--) + goto try_again; + return -ENODEV; +} +EXPORT_SYMBOL_GPL(dbgp_external_startup); + +static int __init ehci_reset_port(int port) +{ + u32 portsc; + u32 delay_time, delay; + int loop; + + dbgp_ehci_status("reset port"); + /* Reset the usb debug port */ + portsc = readl(&ehci_regs->port_status[port - 1]); + portsc &= ~PORT_PE; + portsc |= PORT_RESET; + writel(portsc, &ehci_regs->port_status[port - 1]); + + delay = HUB_ROOT_RESET_TIME; + for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT; + delay_time += delay) { + dbgp_mdelay(delay); + portsc = readl(&ehci_regs->port_status[port - 1]); + if (!(portsc & PORT_RESET)) + break; + } + if (portsc & PORT_RESET) { + /* force reset to complete */ + loop = 100 * 1000; + writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), + &ehci_regs->port_status[port - 1]); + do { + udelay(1); + portsc = readl(&ehci_regs->port_status[port-1]); + } while ((portsc & PORT_RESET) && (--loop > 0)); + } + + /* Device went away? */ + if (!(portsc & PORT_CONNECT)) + return -ENOTCONN; + + /* bomb out completely if something weird happend */ + if ((portsc & PORT_CSC)) + return -EINVAL; + + /* If we've finished resetting, then break out of the loop */ + if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) + return 0; + return -EBUSY; +} + +static int ehci_wait_for_port(int port) +{ + u32 status; + int ret, reps; + + for (reps = 0; reps < 300; reps++) { + status = readl(&ehci_regs->status); + if (status & STS_PCD) + break; + dbgp_mdelay(1); + } + ret = ehci_reset_port(port); + if (ret == 0) + return 0; + return -ENOTCONN; +} + +typedef void (*set_debug_port_t)(int port); + +static void __init default_set_debug_port(int port) +{ +} + +static set_debug_port_t __initdata set_debug_port = default_set_debug_port; + +static void __init nvidia_set_debug_port(int port) +{ + u32 dword; + dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x74); + dword &= ~(0x0f<<12); + dword |= ((port & 0x0f)<<12); + write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74, + dword); + dbgp_printk("set debug port to %d\n", port); +} + +static void __init detect_set_debug_port(void) +{ + u32 vendorid; + + vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x00); + + if ((vendorid & 0xffff) == 0x10de) { + dbgp_printk("using nvidia set_debug_port\n"); + set_debug_port = nvidia_set_debug_port; + } +} + +/* The code in early_ehci_bios_handoff() is derived from the usb pci + * quirk initialization, but altered so as to use the early PCI + * routines. */ +#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */ +#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ +static void __init early_ehci_bios_handoff(void) +{ + u32 hcc_params = readl(&ehci_caps->hcc_params); + int offset = (hcc_params >> 8) & 0xff; + u32 cap; + int msec; + + if (!offset) + return; + + cap = read_pci_config(ehci_dev.bus, ehci_dev.slot, + ehci_dev.func, offset); + dbgp_printk("dbgp: ehci BIOS state %08x\n", cap); + + if ((cap & 0xff) == 1 && (cap & EHCI_USBLEGSUP_BIOS)) { + dbgp_printk("dbgp: BIOS handoff\n"); + write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, + ehci_dev.func, offset + 3, 1); + } + + /* if boot firmware now owns EHCI, spin till it hands it over. */ + msec = 1000; + while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) { + mdelay(10); + msec -= 10; + cap = read_pci_config(ehci_dev.bus, ehci_dev.slot, + ehci_dev.func, offset); + } + + if (cap & EHCI_USBLEGSUP_BIOS) { + /* well, possibly buggy BIOS... try to shut it down, + * and hope nothing goes too wrong */ + dbgp_printk("dbgp: BIOS handoff failed: %08x\n", cap); + write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, + ehci_dev.func, offset + 2, 0); + } + + /* just in case, always disable EHCI SMIs */ + write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + offset + EHCI_USBLEGCTLSTS, 0); +} + +static int __init ehci_setup(void) +{ + u32 ctrl, portsc, hcs_params; + u32 debug_port, new_debug_port = 0, n_ports; + int ret, i; + int port_map_tried; + int playtimes = 3; + + early_ehci_bios_handoff(); + +try_next_time: + port_map_tried = 0; + +try_next_port: + + hcs_params = readl(&ehci_caps->hcs_params); + debug_port = HCS_DEBUG_PORT(hcs_params); + dbgp_phys_port = debug_port; + n_ports = HCS_N_PORTS(hcs_params); + + dbgp_printk("debug_port: %d\n", debug_port); + dbgp_printk("n_ports: %d\n", n_ports); + dbgp_ehci_status(""); + + for (i = 1; i <= n_ports; i++) { + portsc = readl(&ehci_regs->port_status[i-1]); + dbgp_printk("portstatus%d: %08x\n", i, portsc); + } + + if (port_map_tried && (new_debug_port != debug_port)) { + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + return -1; + } + + /* Only reset the controller if it is not already in the + * configured state */ + if (!(readl(&ehci_regs->configured_flag) & FLAG_CF)) { + if (dbgp_ehci_controller_reset() != 0) + return -1; + } else { + dbgp_ehci_status("ehci skip - already configured"); + } + + ret = dbgp_external_startup(); + if (ret == -EIO) + goto next_debug_port; + + if (ret < 0) { + /* Things didn't work so remove my claim */ + ctrl = readl(&ehci_debug->control); + ctrl &= ~(DBGP_CLAIM | DBGP_OUT); + writel(ctrl, &ehci_debug->control); + return -1; + } + return 0; + +next_debug_port: + port_map_tried |= (1<<(debug_port - 1)); + new_debug_port = ((debug_port-1+1)%n_ports) + 1; + if (port_map_tried != ((1<<n_ports) - 1)) { + set_debug_port(new_debug_port); + goto try_next_port; + } + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + + return -1; +} + +int __init early_dbgp_init(char *s) +{ + u32 debug_port, bar, offset; + u32 bus, slot, func, cap; + void __iomem *ehci_bar; + u32 dbgp_num; + u32 bar_val; + char *e; + int ret; + u8 byte; + + if (!early_pci_allowed()) + return -1; + + dbgp_num = 0; + if (*s) + dbgp_num = simple_strtoul(s, &e, 10); + dbgp_printk("dbgp_num: %d\n", dbgp_num); + + cap = find_dbgp(dbgp_num, &bus, &slot, &func); + if (!cap) + return -1; + + dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot, + func); + + debug_port = read_pci_config(bus, slot, func, cap); + bar = (debug_port >> 29) & 0x7; + bar = (bar * 4) + 0xc; + offset = (debug_port >> 16) & 0xfff; + dbgp_printk("bar: %02x offset: %03x\n", bar, offset); + if (bar != PCI_BASE_ADDRESS_0) { + dbgp_printk("only debug ports on bar 1 handled.\n"); + + return -1; + } + + bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); + dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset); + if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) { + dbgp_printk("only simple 32bit mmio bars supported\n"); + + return -1; + } + + /* double check if the mem space is enabled */ + byte = read_pci_config_byte(bus, slot, func, 0x04); + if (!(byte & 0x2)) { + byte |= 0x02; + write_pci_config_byte(bus, slot, func, 0x04, byte); + dbgp_printk("mmio for ehci enabled\n"); + } + + /* + * FIXME I don't have the bar size so just guess PAGE_SIZE is more + * than enough. 1K is the biggest I have seen. + */ + set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK); + ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE); + ehci_bar += bar_val & ~PAGE_MASK; + dbgp_printk("ehci_bar: %p\n", ehci_bar); + + ehci_caps = ehci_bar; + ehci_regs = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase)); + ehci_debug = ehci_bar + offset; + ehci_dev.bus = bus; + ehci_dev.slot = slot; + ehci_dev.func = func; + + detect_set_debug_port(); + + ret = ehci_setup(); + if (ret < 0) { + dbgp_printk("ehci_setup failed\n"); + ehci_debug = NULL; + + return -1; + } + dbgp_ehci_status("early_init_complete"); + + return 0; +} + +static void early_dbgp_write(struct console *con, const char *str, u32 n) +{ + int chunk, ret; + char buf[DBGP_MAX_PACKET]; + int use_cr = 0; + u32 cmd, ctrl; + int reset_run = 0; + + if (!ehci_debug || dbgp_not_safe) + return; + + cmd = readl(&ehci_regs->command); + if (unlikely(!(cmd & CMD_RUN))) { + /* If the ehci controller is not in the run state do extended + * checks to see if the acpi or some other initialization also + * reset the ehci debug port */ + ctrl = readl(&ehci_debug->control); + if (!(ctrl & DBGP_ENABLED)) { + dbgp_not_safe = 1; + dbgp_external_startup(); + } else { + cmd |= CMD_RUN; + writel(cmd, &ehci_regs->command); + reset_run = 1; + } + } + while (n > 0) { + for (chunk = 0; chunk < DBGP_MAX_PACKET && n > 0; + str++, chunk++, n--) { + if (!use_cr && *str == '\n') { + use_cr = 1; + buf[chunk] = '\r'; + str--; + n++; + continue; + } + if (use_cr) + use_cr = 0; + buf[chunk] = *str; + } + if (chunk > 0) { + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, + dbgp_endpoint_out, buf, chunk); + } + } + if (unlikely(reset_run)) { + cmd = readl(&ehci_regs->command); + cmd &= ~CMD_RUN; + writel(cmd, &ehci_regs->command); + } +} + +struct console early_dbgp_console = { + .name = "earlydbg", + .write = early_dbgp_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +int dbgp_reset_prep(void) +{ + u32 ctrl; + + dbgp_not_safe = 1; + if (!ehci_debug) + return 0; + + if (early_dbgp_console.index != -1 && + !(early_dbgp_console.flags & CON_BOOT)) + return 1; + /* This means the console is not initialized, or should get + * shutdown so as to allow for reuse of the usb device, which + * means it is time to shutdown the usb debug port. */ + ctrl = readl(&ehci_debug->control); + if (ctrl & DBGP_ENABLED) { + ctrl &= ~(DBGP_CLAIM); + writel(ctrl, &ehci_debug->control); + } + return 0; +} +EXPORT_SYMBOL_GPL(dbgp_reset_prep); |
