summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc2
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc2')
-rw-r--r--drivers/usb/dwc2/Kconfig68
-rw-r--r--drivers/usb/dwc2/Makefile32
-rw-r--r--drivers/usb/dwc2/core.c10
-rw-r--r--drivers/usb/dwc2/core.h197
-rw-r--r--drivers/usb/dwc2/core_intr.c17
-rw-r--r--drivers/usb/dwc2/gadget.c387
-rw-r--r--drivers/usb/dwc2/hcd.c94
-rw-r--r--drivers/usb/dwc2/hcd.h10
-rw-r--r--drivers/usb/dwc2/pci.c7
-rw-r--r--drivers/usb/dwc2/platform.c44
10 files changed, 491 insertions, 375 deletions
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index f93807b..b323c4c 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -1,6 +1,6 @@
config USB_DWC2
- bool "DesignWare USB2 DRD Core Support"
- depends on USB
+ tristate "DesignWare USB2 DRD Core Support"
+ depends on USB || USB_GADGET
help
Say Y here if your system has a Dual Role Hi-Speed USB
controller based on the DesignWare HSOTG IP Core.
@@ -10,49 +10,61 @@ config USB_DWC2
bus interface module (if you have a PCI bus system) will be
called dwc2_pci.ko, and the platform interface module (for
controllers directly connected to the CPU) will be called
- dwc2_platform.ko. For gadget mode, there will be a single
- module called dwc2_gadget.ko.
-
- NOTE: The s3c-hsotg driver is now renamed to dwc2_gadget. The
- host and gadget drivers are still currently separate drivers.
- There are plans to merge the dwc2_gadget driver with the dwc2
- host driver in the near future to create a dual-role driver.
+ dwc2_platform.ko. For all modes(host, gadget and dual-role), there
+ will be an additional module named dwc2.ko.
if USB_DWC2
+choice
+ bool "DWC2 Mode Selection"
+ default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET)
+ default USB_DWC2_HOST if (USB && !USB_GADGET)
+ default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET)
+
config USB_DWC2_HOST
- tristate "Host only mode"
+ bool "Host only mode"
depends on USB
help
The Designware USB2.0 high-speed host controller
- integrated into many SoCs.
+ integrated into many SoCs. Select this option if you want the
+ driver to operate in Host-only mode.
-config USB_DWC2_PLATFORM
- bool "DWC2 Platform"
- depends on USB_DWC2_HOST
- default USB_DWC2_HOST
+comment "Gadget/Dual-role mode requires USB Gadget support to be enabled"
+
+config USB_DWC2_PERIPHERAL
+ bool "Gadget only mode"
+ depends on USB_GADGET=y || USB_GADGET=USB_DWC2
help
- The Designware USB2.0 platform interface module for
- controllers directly connected to the CPU. This is only
- used for host mode.
+ The Designware USB2.0 high-speed gadget controller
+ integrated into many SoCs. Select this option if you want the
+ driver to operate in Peripheral-only mode. This option requires
+ USB_GADGET to be enabled.
+
+config USB_DWC2_DUAL_ROLE
+ bool "Dual Role mode"
+ depends on (USB=y || USB=USB_DWC2) && (USB_GADGET=y || USB_GADGET=USB_DWC2)
+ help
+ Select this option if you want the driver to work in a dual-role
+ mode. In this mode both host and gadget features are enabled, and
+ the role will be determined by the cable that gets plugged-in. This
+ option requires USB_GADGET to be enabled.
+endchoice
+
+config USB_DWC2_PLATFORM
+ tristate "DWC2 Platform"
+ default USB_DWC2_HOST || USB_DWC2_PERIPHERAL
+ help
+ The Designware USB2.0 platform interface module for
+ controllers directly connected to the CPU.
config USB_DWC2_PCI
- bool "DWC2 PCI"
+ tristate "DWC2 PCI"
depends on USB_DWC2_HOST && PCI
default USB_DWC2_HOST
help
The Designware USB2.0 PCI interface module for controllers
connected to a PCI bus. This is only used for host mode.
-comment "Gadget mode requires USB Gadget support to be enabled"
-
-config USB_DWC2_PERIPHERAL
- tristate "Gadget only mode"
- depends on USB_GADGET
- help
- The Designware USB2.0 high-speed gadget controller
- integrated into many SoCs.
-
config USB_DWC2_DEBUG
bool "Enable Debugging Messages"
help
diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile
index b73d2a5..8f75267 100644
--- a/drivers/usb/dwc2/Makefile
+++ b/drivers/usb/dwc2/Makefile
@@ -1,28 +1,28 @@
ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG
ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG
-obj-$(CONFIG_USB_DWC2_HOST) += dwc2.o
+obj-$(CONFIG_USB_DWC2) += dwc2.o
dwc2-y := core.o core_intr.o
-dwc2-y += hcd.o hcd_intr.o
-dwc2-y += hcd_queue.o hcd_ddma.o
+
+ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
+ dwc2-y += hcd.o hcd_intr.o
+ dwc2-y += hcd_queue.o hcd_ddma.o
+endif
+
+ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
+ dwc2-y += gadget.o
+endif
# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to
# this location and renamed gadget.c. When building for dynamically linked
-# modules, dwc2_gadget.ko will get built for peripheral mode. For host mode,
-# the core module will be dwc2.ko, the PCI bus interface module will called
-# dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko.
-# At present the host and gadget driver will be separate drivers, but there
-# are plans in the near future to create a dual-role driver.
+# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role
+# mode. The PCI bus interface module will called dwc2_pci.ko and the platform
+# interface module will be called dwc2_platform.ko.
ifneq ($(CONFIG_USB_DWC2_PCI),)
- obj-$(CONFIG_USB_DWC2_HOST) += dwc2_pci.o
+ obj-$(CONFIG_USB_DWC2) += dwc2_pci.o
dwc2_pci-y := pci.o
endif
-ifneq ($(CONFIG_USB_DWC2_PLATFORM),)
- obj-$(CONFIG_USB_DWC2_HOST) += dwc2_platform.o
- dwc2_platform-y := platform.o
-endif
-
-obj-$(CONFIG_USB_DWC2_PERIPHERAL) += dwc2_gadget.o
-dwc2_gadget-y := gadget.o
+obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o
+dwc2_platform-y := platform.o
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index d926945..7605850b 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -458,16 +458,6 @@ int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq)
/* Clear the SRP success bit for FS-I2c */
hsotg->srp_success = 0;
- if (irq >= 0) {
- dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
- irq);
- retval = devm_request_irq(hsotg->dev, irq,
- dwc2_handle_common_intr, IRQF_SHARED,
- dev_name(hsotg->dev), hsotg);
- if (retval)
- return retval;
- }
-
/* Enable common interrupts */
dwc2_enable_common_interrupts(hsotg);
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 55c90c5..7a70a13 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -84,7 +84,7 @@ static const char * const s3c_hsotg_supply_names[] = {
*/
#define EP0_MPS_LIMIT 64
-struct s3c_hsotg;
+struct dwc2_hsotg;
struct s3c_hsotg_req;
/**
@@ -130,7 +130,7 @@ struct s3c_hsotg_req;
struct s3c_hsotg_ep {
struct usb_ep ep;
struct list_head queue;
- struct s3c_hsotg *parent;
+ struct dwc2_hsotg *parent;
struct s3c_hsotg_req *req;
struct dentry *debugfs;
@@ -155,67 +155,6 @@ struct s3c_hsotg_ep {
};
/**
- * struct s3c_hsotg - driver state.
- * @dev: The parent device supplied to the probe function
- * @driver: USB gadget driver
- * @phy: The otg phy transceiver structure for phy control.
- * @uphy: The otg phy transceiver structure for old USB phy control.
- * @plat: The platform specific configuration data. This can be removed once
- * all SoCs support usb transceiver.
- * @regs: The memory area mapped for accessing registers.
- * @irq: The IRQ number we are using
- * @supplies: Definition of USB power supplies
- * @phyif: PHY interface width
- * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
- * @num_of_eps: Number of available EPs (excluding EP0)
- * @debug_root: root directrory for debugfs.
- * @debug_file: main status file for debugfs.
- * @debug_fifo: FIFO status file for debugfs.
- * @ep0_reply: Request used for ep0 reply.
- * @ep0_buff: Buffer for EP0 reply data, if needed.
- * @ctrl_buff: Buffer for EP0 control requests.
- * @ctrl_req: Request for EP0 control packets.
- * @setup: NAK management for EP0 SETUP
- * @last_rst: Time of last reset
- * @eps: The endpoints being supplied to the gadget framework
- */
-struct s3c_hsotg {
- struct device *dev;
- struct usb_gadget_driver *driver;
- struct phy *phy;
- struct usb_phy *uphy;
- struct s3c_hsotg_plat *plat;
-
- spinlock_t lock;
-
- void __iomem *regs;
- int irq;
- struct clk *clk;
-
- struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
-
- u32 phyif;
- int fifo_mem;
- unsigned int dedicated_fifos:1;
- unsigned char num_of_eps;
- u32 fifo_map;
-
- struct dentry *debug_root;
- struct dentry *debug_file;
- struct dentry *debug_fifo;
-
- struct usb_request *ep0_reply;
- struct usb_request *ctrl_req;
- u8 ep0_buff[8];
- u8 ctrl_buff[8];
-
- struct usb_gadget gadget;
- unsigned int setup;
- unsigned long last_rst;
- struct s3c_hsotg_ep *eps;
-};
-
-/**
* struct s3c_hsotg_req - data transfer request
* @req: The USB gadget request
* @queue: The list of requests for the endpoint this is queued for.
@@ -229,6 +168,7 @@ struct s3c_hsotg_req {
unsigned char mapped;
};
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
#define call_gadget(_hs, _entry) \
do { \
if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
@@ -238,6 +178,9 @@ do { \
spin_lock(&_hs->lock); \
} \
} while (0)
+#else
+#define call_gadget(_hs, _entry) do {} while (0)
+#endif
struct dwc2_hsotg;
struct dwc2_host_chan;
@@ -495,11 +438,13 @@ struct dwc2_hw_params {
* struct dwc2_hsotg - Holds the state of the driver, including the non-periodic
* and periodic schedules
*
+ * These are common for both host and peripheral modes:
+ *
* @dev: The struct device pointer
* @regs: Pointer to controller regs
- * @core_params: Parameters that define how the core should be configured
* @hw_params: Parameters that were autodetected from the
* hardware registers
+ * @core_params: Parameters that define how the core should be configured
* @op_state: The operational State, during transitions (a_host=>
* a_peripheral and b_device=>b_host) this may not match
* the core, but allows the software to determine
@@ -508,6 +453,8 @@ struct dwc2_hw_params {
* - USB_DR_MODE_PERIPHERAL
* - USB_DR_MODE_HOST
* - USB_DR_MODE_OTG
+ * @lock: Spinlock that protects all the driver data structures
+ * @priv: Stores a pointer to the struct usb_hcd
* @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
* transfer are in process of being queued
* @srp_success: Stores status of SRP request in the case of a FS PHY
@@ -517,6 +464,9 @@ struct dwc2_hw_params {
* interrupt
* @wkp_timer: Timer object for handling Wakeup Detected interrupt
* @lx_state: Lx state of connected device
+ *
+ * These are for host mode:
+ *
* @flags: Flags for handling root port state changes
* @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule.
* Transfers associated with these QHs are not currently
@@ -585,11 +535,31 @@ struct dwc2_hw_params {
* @status_buf_dma: DMA address for status_buf
* @start_work: Delayed work for handling host A-cable connection
* @reset_work: Delayed work for handling a port reset
- * @lock: Spinlock that protects all the driver data structures
- * @priv: Stores a pointer to the struct usb_hcd
* @otg_port: OTG port number
* @frame_list: Frame list
* @frame_list_dma: Frame list DMA address
+ *
+ * These are for peripheral mode:
+ *
+ * @driver: USB gadget driver
+ * @phy: The otg phy transceiver structure for phy control.
+ * @uphy: The otg phy transceiver structure for old USB phy control.
+ * @plat: The platform specific configuration data. This can be removed once
+ * all SoCs support usb transceiver.
+ * @supplies: Definition of USB power supplies
+ * @phyif: PHY interface width
+ * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
+ * @num_of_eps: Number of available EPs (excluding EP0)
+ * @debug_root: Root directrory for debugfs.
+ * @debug_file: Main status file for debugfs.
+ * @debug_fifo: FIFO status file for debugfs.
+ * @ep0_reply: Request used for ep0 reply.
+ * @ep0_buff: Buffer for EP0 reply data, if needed.
+ * @ctrl_buff: Buffer for EP0 control requests.
+ * @ctrl_req: Request for EP0 control packets.
+ * @setup: NAK management for EP0 SETUP
+ * @last_rst: Time of last reset
+ * @eps: The endpoints being supplied to the gadget framework
*/
struct dwc2_hsotg {
struct device *dev;
@@ -601,6 +571,16 @@ struct dwc2_hsotg {
enum usb_otg_state op_state;
enum usb_dr_mode dr_mode;
+ struct phy *phy;
+ struct usb_phy *uphy;
+ struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
+
+ spinlock_t lock;
+ struct mutex init_mutex;
+ void *priv;
+ int irq;
+ struct clk *clk;
+
unsigned int queuing_high_bandwidth:1;
unsigned int srp_success:1;
@@ -609,6 +589,18 @@ struct dwc2_hsotg {
struct timer_list wkp_timer;
enum dwc2_lx_state lx_state;
+ struct dentry *debug_root;
+ struct dentry *debug_file;
+ struct dentry *debug_fifo;
+
+ /* DWC OTG HW Release versions */
+#define DWC2_CORE_REV_2_71a 0x4f54271a
+#define DWC2_CORE_REV_2_90a 0x4f54290a
+#define DWC2_CORE_REV_2_92a 0x4f54292a
+#define DWC2_CORE_REV_2_94a 0x4f54294a
+#define DWC2_CORE_REV_3_00a 0x4f54300a
+
+#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
union dwc2_hcd_internal_flags {
u32 d32;
struct {
@@ -655,19 +647,10 @@ struct dwc2_hsotg {
struct delayed_work start_work;
struct delayed_work reset_work;
- spinlock_t lock;
- void *priv;
u8 otg_port;
u32 *frame_list;
dma_addr_t frame_list_dma;
- /* DWC OTG HW Release versions */
-#define DWC2_CORE_REV_2_71a 0x4f54271a
-#define DWC2_CORE_REV_2_90a 0x4f54290a
-#define DWC2_CORE_REV_2_92a 0x4f54292a
-#define DWC2_CORE_REV_2_94a 0x4f54294a
-#define DWC2_CORE_REV_3_00a 0x4f54300a
-
#ifdef DEBUG
u32 frrem_samples;
u64 frrem_accum;
@@ -686,6 +669,31 @@ struct dwc2_hsotg {
u32 hfnum_other_samples_b;
u64 hfnum_other_frrem_accum_b;
#endif
+#endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+ /* Gadget structures */
+ struct usb_gadget_driver *driver;
+ struct s3c_hsotg_plat *plat;
+
+ u32 phyif;
+ int fifo_mem;
+ unsigned int dedicated_fifos:1;
+ unsigned char num_of_eps;
+ u32 fifo_map;
+
+ struct usb_request *ep0_reply;
+ struct usb_request *ctrl_req;
+ u8 ep0_buff[8];
+ u8 ctrl_buff[8];
+
+ struct usb_gadget gadget;
+ unsigned int enabled:1;
+ unsigned int connected:1;
+ unsigned int setup:1;
+ unsigned long last_rst;
+ struct s3c_hsotg_ep *eps;
+#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
};
/* Reasons for halting a host channel */
@@ -955,4 +963,43 @@ extern void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg);
*/
extern u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg);
+/* Gadget defines */
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+extern int s3c_hsotg_remove(struct dwc2_hsotg *hsotg);
+extern int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2);
+extern int s3c_hsotg_resume(struct dwc2_hsotg *dwc2);
+extern int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq);
+extern void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2);
+extern void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg);
+extern void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2);
+#else
+static inline int s3c_hsotg_remove(struct dwc2_hsotg *dwc2)
+{ return 0; }
+static inline int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2)
+{ return 0; }
+static inline int s3c_hsotg_resume(struct dwc2_hsotg *dwc2)
+{ return 0; }
+static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
+{ return 0; }
+static inline void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2) {}
+static inline void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
+static inline void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2) {}
+#endif
+
+#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
+extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
+extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
+#else
+static inline void dwc2_set_all_params(struct dwc2_core_params *params, int value) {}
+static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {}
+static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
+ const struct dwc2_core_params *params)
+{ return 0; }
+#endif
+
#endif /* __DWC2_CORE_H__ */
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index c93918b..ad43c5b 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -128,6 +128,9 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
dwc2_op_state_str(hsotg));
gotgctl = readl(hsotg->regs + GOTGCTL);
+ if (dwc2_is_device_mode(hsotg))
+ s3c_hsotg_disconnect(hsotg);
+
if (hsotg->op_state == OTG_STATE_B_HOST) {
hsotg->op_state = OTG_STATE_B_PERIPHERAL;
} else {
@@ -287,9 +290,11 @@ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
* Release lock before scheduling workq as it holds spinlock during
* scheduling.
*/
- spin_unlock(&hsotg->lock);
- queue_work(hsotg->wq_otg, &hsotg->wf_otg);
- spin_lock(&hsotg->lock);
+ if (hsotg->wq_otg) {
+ spin_unlock(&hsotg->lock);
+ queue_work(hsotg->wq_otg, &hsotg->wf_otg);
+ spin_lock(&hsotg->lock);
+ }
/* Clear interrupt */
writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
@@ -312,6 +317,12 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
/* Clear interrupt */
writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
+
+ /*
+ * Report disconnect if there is any previous session established
+ */
+ if (dwc2_is_device_mode(hsotg))
+ s3c_hsotg_disconnect(hsotg);
}
/*
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 8b5c079..200168e 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/debugfs.h>
+#include <linux/mutex.h>
#include <linux/seq_file.h>
#include <linux/delay.h>
#include <linux/io.h>
@@ -36,6 +37,7 @@
#include <linux/platform_data/s3c-hsotg.h>
#include "core.h"
+#include "hw.h"
/* conversion functions */
static inline struct s3c_hsotg_req *our_req(struct usb_request *req)
@@ -48,9 +50,9 @@ static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep)
return container_of(ep, struct s3c_hsotg_ep, ep);
}
-static inline struct s3c_hsotg *to_hsotg(struct usb_gadget *gadget)
+static inline struct dwc2_hsotg *to_hsotg(struct usb_gadget *gadget)
{
- return container_of(gadget, struct s3c_hsotg, gadget);
+ return container_of(gadget, struct dwc2_hsotg, gadget);
}
static inline void __orr32(void __iomem *ptr, u32 val)
@@ -64,7 +66,7 @@ static inline void __bic32(void __iomem *ptr, u32 val)
}
/* forward decleration of functions */
-static void s3c_hsotg_dump(struct s3c_hsotg *hsotg);
+static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg);
/**
* using_dma - return the DMA status of the driver.
@@ -85,7 +87,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg);
*
* Until this issue is sorted out, we always return 'false'.
*/
-static inline bool using_dma(struct s3c_hsotg *hsotg)
+static inline bool using_dma(struct dwc2_hsotg *hsotg)
{
return false; /* support is not complete */
}
@@ -95,7 +97,7 @@ static inline bool using_dma(struct s3c_hsotg *hsotg)
* @hsotg: The device state
* @ints: A bitmask of the interrupts to enable
*/
-static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
+static void s3c_hsotg_en_gsint(struct dwc2_hsotg *hsotg, u32 ints)
{
u32 gsintmsk = readl(hsotg->regs + GINTMSK);
u32 new_gsintmsk;
@@ -113,7 +115,7 @@ static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
* @hsotg: The device state
* @ints: A bitmask of the interrupts to enable
*/
-static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
+static void s3c_hsotg_disable_gsint(struct dwc2_hsotg *hsotg, u32 ints)
{
u32 gsintmsk = readl(hsotg->regs + GINTMSK);
u32 new_gsintmsk;
@@ -134,7 +136,7 @@ static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
* Set or clear the mask for an individual endpoint's interrupt
* request.
*/
-static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg,
unsigned int ep, unsigned int dir_in,
unsigned int en)
{
@@ -159,7 +161,7 @@ static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
* s3c_hsotg_init_fifo - initialise non-periodic FIFOs
* @hsotg: The device instance.
*/
-static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
{
unsigned int ep;
unsigned int addr;
@@ -283,7 +285,7 @@ static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep)
* This is the reverse of s3c_hsotg_map_dma(), called for the completion
* of a request to ensure the buffer is ready for access by the caller.
*/
-static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_unmap_dma(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req)
{
@@ -312,7 +314,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
*
* This routine is only needed for PIO
*/
-static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_write_fifo(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req)
{
@@ -517,7 +519,7 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
* Start the given request running by setting the endpoint registers
* appropriately, and writing any data to the FIFOs.
*/
-static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_start_req(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req,
bool continuing)
@@ -707,7 +709,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
* DMA memory, then we map the memory and mark our request to allow us to
* cleanup on completion.
*/
-static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_map_dma(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct usb_request *req)
{
@@ -736,7 +738,7 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
{
struct s3c_hsotg_req *hs_req = our_req(req);
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hs = hs_ep->parent;
+ struct dwc2_hsotg *hs = hs_ep->parent;
bool first;
dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
@@ -768,7 +770,7 @@ static int s3c_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req,
gfp_t gfp_flags)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hs = hs_ep->parent;
+ struct dwc2_hsotg *hs = hs_ep->parent;
unsigned long flags = 0;
int ret = 0;
@@ -799,7 +801,7 @@ static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
struct usb_request *req)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hsotg = hs_ep->parent;
+ struct dwc2_hsotg *hsotg = hs_ep->parent;
dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req);
@@ -814,7 +816,7 @@ static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
* Convert the given wIndex into a pointer to an driver endpoint
* structure, or return NULL if it is not a valid endpoint.
*/
-static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
+static struct s3c_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg,
u32 windex)
{
struct s3c_hsotg_ep *ep = &hsotg->eps[windex & 0x7F];
@@ -843,7 +845,7 @@ static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
* Create a request and queue it on the given endpoint. This is useful as
* an internal method of sending replies to certain control requests, etc.
*/
-static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_send_reply(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *ep,
void *buff,
int length)
@@ -884,7 +886,7 @@ static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg,
* @hsotg: The device state
* @ctrl: USB control request
*/
-static int s3c_hsotg_process_req_status(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
struct usb_ctrlrequest *ctrl)
{
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
@@ -955,7 +957,7 @@ static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep)
* @hsotg: The device state
* @ctrl: USB control request
*/
-static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
struct usb_ctrlrequest *ctrl)
{
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
@@ -1028,8 +1030,7 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
return 1;
}
-static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
-static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg);
+static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg);
/**
* s3c_hsotg_stall_ep0 - stall ep0
@@ -1037,7 +1038,7 @@ static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg);
*
* Set stall for ep0 as response for setup request.
*/
-static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_stall_ep0(struct dwc2_hsotg *hsotg)
{
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
u32 reg;
@@ -1076,7 +1077,7 @@ static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg)
* needs to work out what to do next (and whether to pass it on to the
* gadget driver).
*/
-static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_process_control(struct dwc2_hsotg *hsotg,
struct usb_ctrlrequest *ctrl)
{
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
@@ -1107,7 +1108,6 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
switch (ctrl->bRequest) {
case USB_REQ_SET_ADDRESS:
- s3c_hsotg_disconnect(hsotg);
dcfg = readl(hsotg->regs + DCFG);
dcfg &= ~DCFG_DEVADDR_MASK;
dcfg |= (le16_to_cpu(ctrl->wValue) <<
@@ -1161,7 +1161,7 @@ static void s3c_hsotg_complete_setup(struct usb_ep *ep,
struct usb_request *req)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hsotg = hs_ep->parent;
+ struct dwc2_hsotg *hsotg = hs_ep->parent;
if (req->status < 0) {
dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status);
@@ -1183,7 +1183,7 @@ static void s3c_hsotg_complete_setup(struct usb_ep *ep,
* Enqueue a request on EP0 if necessary to received any SETUP packets
* received from the host.
*/
-static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg)
{
struct usb_request *req = hsotg->ctrl_req;
struct s3c_hsotg_req *hs_req = our_req(req);
@@ -1226,7 +1226,7 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
*
* Note, expects the ep to already be locked as appropriate.
*/
-static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_complete_request(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req,
int result)
@@ -1291,7 +1291,7 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
* endpoint, so sort out whether we need to read the data into a request
* that has been made for that endpoint.
*/
-static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
+static void s3c_hsotg_rx_data(struct dwc2_hsotg *hsotg, int ep_idx, int size)
{
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx];
struct s3c_hsotg_req *hs_req = hs_ep->req;
@@ -1356,7 +1356,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
* currently believed that we do not need to wait for any space in
* the TxFIFO.
*/
-static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_send_zlp(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_req *req)
{
u32 ctrl;
@@ -1398,7 +1398,7 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
* transfer for an OUT endpoint has been completed, either by a short
* packet or by the finish of a transfer.
*/
-static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_handle_outdone(struct dwc2_hsotg *hsotg,
int epnum, bool was_setup)
{
u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum));
@@ -1471,7 +1471,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
*
* Return the current frame number
*/
-static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
+static u32 s3c_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
{
u32 dsts;
@@ -1498,7 +1498,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
* as the actual data should be sent to the memory directly and we turn
* on the completion interrupts to get notifications of transfer completion.
*/
-static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_handle_rx(struct dwc2_hsotg *hsotg)
{
u32 grxstsr = readl(hsotg->regs + GRXSTSP);
u32 epnum, status, size;
@@ -1590,7 +1590,7 @@ static u32 s3c_hsotg_ep0_mps(unsigned int mps)
* Configure the maximum packet size for the given endpoint, updating
* the hardware control registers to reflect this.
*/
-static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_set_ep_maxpacket(struct dwc2_hsotg *hsotg,
unsigned int ep, unsigned int mps)
{
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
@@ -1645,7 +1645,7 @@ bad_mps:
* @hsotg: The driver state
* @idx: The index for the endpoint (0..15)
*/
-static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx)
+static void s3c_hsotg_txfifo_flush(struct dwc2_hsotg *hsotg, unsigned int idx)
{
int timeout;
int val;
@@ -1681,7 +1681,7 @@ static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx)
* Check to see if there is a request that has data to send, and if so
* make an attempt to write data into the FIFO.
*/
-static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_trytx(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep)
{
struct s3c_hsotg_req *hs_req = hs_ep->req;
@@ -1714,7 +1714,7 @@ static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg,
* An IN transfer has been completed, update the transfer's state and then
* call the relevant completion routines.
*/
-static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_complete_in(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep)
{
struct s3c_hsotg_req *hs_req = hs_ep->req;
@@ -1791,7 +1791,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
*
* Process and clear any interrupt pending for an individual endpoint
*/
-static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
+static void s3c_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
int dir_in)
{
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx];
@@ -1916,7 +1916,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
* Handle updating the device settings after the enumeration phase has
* been completed.
*/
-static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_irq_enumdone(struct dwc2_hsotg *hsotg)
{
u32 dsts = readl(hsotg->regs + DSTS);
int ep0_mps = 0, ep_mps = 8;
@@ -1993,7 +1993,7 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
* Go through the requests on the given endpoint and mark them
* completed with the given result code.
*/
-static void kill_all_requests(struct s3c_hsotg *hsotg,
+static void kill_all_requests(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *ep,
int result, bool force)
{
@@ -2027,22 +2027,27 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
* transactions and signal the gadget driver that this
* has happened.
*/
-static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg)
+void s3c_hsotg_disconnect(struct dwc2_hsotg *hsotg)
{
unsigned ep;
+ if (!hsotg->connected)
+ return;
+
+ hsotg->connected = 0;
for (ep = 0; ep < hsotg->num_of_eps; ep++)
kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true);
call_gadget(hsotg, disconnect);
}
+EXPORT_SYMBOL_GPL(s3c_hsotg_disconnect);
/**
* s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler
* @hsotg: The device state:
* @periodic: True if this is a periodic FIFO interrupt
*/
-static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
+static void s3c_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic)
{
struct s3c_hsotg_ep *ep;
int epno, ret;
@@ -2076,7 +2081,7 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
*
* Issue a soft reset to the core, and await the core finishing it.
*/
-static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
+static int s3c_hsotg_corereset(struct dwc2_hsotg *hsotg)
{
int timeout;
u32 grstctl;
@@ -2124,7 +2129,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
*
* Issue a soft reset to the core, and await the core finishing it.
*/
-static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
+void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg)
{
s3c_hsotg_corereset(hsotg);
@@ -2241,12 +2246,23 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
readl(hsotg->regs + DOEPCTL0));
/* clear global NAKs */
- writel(DCTL_CGOUTNAK | DCTL_CGNPINNAK,
+ writel(DCTL_CGOUTNAK | DCTL_CGNPINNAK | DCTL_SFTDISCON,
hsotg->regs + DCTL);
/* must be at-least 3ms to allow bus to see disconnect */
mdelay(3);
+ hsotg->last_rst = jiffies;
+}
+
+static void s3c_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
+{
+ /* set the soft-disconnect bit */
+ __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
+}
+
+void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg)
+{
/* remove the soft-disconnect and let's go */
__bic32(hsotg->regs + DCTL, DCTL_SFTDISCON);
}
@@ -2258,7 +2274,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
*/
static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
{
- struct s3c_hsotg *hsotg = pw;
+ struct dwc2_hsotg *hsotg = pw;
int retry_count = 8;
u32 gintsts;
u32 gintmsk;
@@ -2273,31 +2289,11 @@ irq_retry:
gintsts &= gintmsk;
- if (gintsts & GINTSTS_OTGINT) {
- u32 otgint = readl(hsotg->regs + GOTGINT);
-
- dev_info(hsotg->dev, "OTGInt: %08x\n", otgint);
-
- writel(otgint, hsotg->regs + GOTGINT);
- }
-
- if (gintsts & GINTSTS_SESSREQINT) {
- dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__);
- writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
- }
-
if (gintsts & GINTSTS_ENUMDONE) {
writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS);
s3c_hsotg_irq_enumdone(hsotg);
- }
-
- if (gintsts & GINTSTS_CONIDSTSCHNG) {
- dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n",
- readl(hsotg->regs + DSTS),
- readl(hsotg->regs + GOTGCTL));
-
- writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
+ hsotg->connected = 1;
}
if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) {
@@ -2340,8 +2336,8 @@ irq_retry:
kill_all_requests(hsotg, &hsotg->eps[0],
-ECONNRESET, true);
- s3c_hsotg_core_init(hsotg);
- hsotg->last_rst = jiffies;
+ s3c_hsotg_core_init_disconnected(hsotg);
+ s3c_hsotg_core_connect(hsotg);
}
}
}
@@ -2380,25 +2376,6 @@ irq_retry:
s3c_hsotg_handle_rx(hsotg);
}
- if (gintsts & GINTSTS_MODEMIS) {
- dev_warn(hsotg->dev, "warning, mode mismatch triggered\n");
- writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
- }
-
- if (gintsts & GINTSTS_USBSUSP) {
- dev_info(hsotg->dev, "GINTSTS_USBSusp\n");
- writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
-
- call_gadget(hsotg, suspend);
- }
-
- if (gintsts & GINTSTS_WKUPINT) {
- dev_info(hsotg->dev, "GINTSTS_WkUpIn\n");
- writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
-
- call_gadget(hsotg, resume);
- }
-
if (gintsts & GINTSTS_ERLYSUSP) {
dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n");
writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS);
@@ -2450,7 +2427,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
const struct usb_endpoint_descriptor *desc)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hsotg = hs_ep->parent;
+ struct dwc2_hsotg *hsotg = hs_ep->parent;
unsigned long flags;
int index = hs_ep->index;
u32 epctrl_reg;
@@ -2593,7 +2570,7 @@ error:
static int s3c_hsotg_ep_disable(struct usb_ep *ep)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hsotg = hs_ep->parent;
+ struct dwc2_hsotg *hsotg = hs_ep->parent;
int dir_in = hs_ep->dir_in;
int index = hs_ep->index;
unsigned long flags;
@@ -2658,7 +2635,7 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
{
struct s3c_hsotg_req *hs_req = our_req(req);
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hs = hs_ep->parent;
+ struct dwc2_hsotg *hs = hs_ep->parent;
unsigned long flags;
dev_dbg(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
@@ -2684,7 +2661,7 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hs = hs_ep->parent;
+ struct dwc2_hsotg *hs = hs_ep->parent;
int index = hs_ep->index;
u32 epreg;
u32 epctl;
@@ -2748,7 +2725,7 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
static int s3c_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hs = hs_ep->parent;
+ struct dwc2_hsotg *hs = hs_ep->parent;
unsigned long flags = 0;
int ret = 0;
@@ -2777,7 +2754,7 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = {
* A wrapper for platform code responsible for controlling
* low-level USB code
*/
-static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_phy_enable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
@@ -2800,7 +2777,7 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
* A wrapper for platform code responsible for controlling
* low-level USB code
*/
-static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_phy_disable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
@@ -2818,7 +2795,7 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
* s3c_hsotg_init - initalize the usb core
* @hsotg: The driver state
*/
-static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_init(struct dwc2_hsotg *hsotg)
{
/* unmask subset of endpoint interrupts */
@@ -2868,7 +2845,8 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
- struct s3c_hsotg *hsotg = to_hsotg(gadget);
+ struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+ unsigned long flags;
int ret;
if (!hsotg) {
@@ -2889,6 +2867,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
return -EINVAL;
}
+ mutex_lock(&hsotg->init_mutex);
WARN_ON(hsotg->driver);
driver->driver.bus = NULL;
@@ -2905,11 +2884,22 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
goto err;
}
- hsotg->last_rst = jiffies;
+ s3c_hsotg_phy_enable(hsotg);
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ s3c_hsotg_init(hsotg);
+ s3c_hsotg_core_init_disconnected(hsotg);
+ hsotg->enabled = 0;
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
+
+ mutex_unlock(&hsotg->init_mutex);
+
return 0;
err:
+ mutex_unlock(&hsotg->init_mutex);
hsotg->driver = NULL;
return ret;
}
@@ -2921,16 +2911,17 @@ err:
*
* Stop udc hw block and stay tunned for future transmissions
*/
-static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
- struct usb_gadget_driver *driver)
+static int s3c_hsotg_udc_stop(struct usb_gadget *gadget)
{
- struct s3c_hsotg *hsotg = to_hsotg(gadget);
+ struct dwc2_hsotg *hsotg = to_hsotg(gadget);
unsigned long flags = 0;
int ep;
if (!hsotg)
return -ENODEV;
+ mutex_lock(&hsotg->init_mutex);
+
/* all endpoints should be shutdown */
for (ep = 1; ep < hsotg->num_of_eps; ep++)
s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
@@ -2939,13 +2930,18 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
hsotg->driver = NULL;
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+ hsotg->enabled = 0;
spin_unlock_irqrestore(&hsotg->lock, flags);
+ s3c_hsotg_phy_disable(hsotg);
+
regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
clk_disable(hsotg->clk);
+ mutex_unlock(&hsotg->init_mutex);
+
return 0;
}
@@ -2969,23 +2965,26 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
*/
static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
{
- struct s3c_hsotg *hsotg = to_hsotg(gadget);
+ struct dwc2_hsotg *hsotg = to_hsotg(gadget);
unsigned long flags = 0;
dev_dbg(hsotg->dev, "%s: is_on: %d\n", __func__, is_on);
+ mutex_lock(&hsotg->init_mutex);
spin_lock_irqsave(&hsotg->lock, flags);
if (is_on) {
- s3c_hsotg_phy_enable(hsotg);
clk_enable(hsotg->clk);
- s3c_hsotg_core_init(hsotg);
+ hsotg->enabled = 1;
+ s3c_hsotg_core_connect(hsotg);
} else {
+ s3c_hsotg_core_disconnect(hsotg);
+ hsotg->enabled = 0;
clk_disable(hsotg->clk);
- s3c_hsotg_phy_disable(hsotg);
}
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
spin_unlock_irqrestore(&hsotg->lock, flags);
+ mutex_unlock(&hsotg->init_mutex);
return 0;
}
@@ -3007,7 +3006,7 @@ static const struct usb_gadget_ops s3c_hsotg_gadget_ops = {
* creation) to give to the gadget driver. Setup the endpoint name, any
* direction information and other state that may be required.
*/
-static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_initep(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
int epnum)
{
@@ -3056,7 +3055,7 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
*
* Read the USB core HW configuration registers
*/
-static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_hw_cfg(struct dwc2_hsotg *hsotg)
{
u32 cfg2, cfg3, cfg4;
/* check hardware configuration */
@@ -3080,7 +3079,7 @@ static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg)
* s3c_hsotg_dump - dump state of the udc
* @param: The device state
*/
-static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg)
{
#ifdef DEBUG
struct device *dev = hsotg->dev;
@@ -3139,7 +3138,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
*/
static int state_show(struct seq_file *seq, void *v)
{
- struct s3c_hsotg *hsotg = seq->private;
+ struct dwc2_hsotg *hsotg = seq->private;
void __iomem *regs = hsotg->regs;
int idx;
@@ -3209,7 +3208,7 @@ static const struct file_operations state_fops = {
*/
static int fifo_show(struct seq_file *seq, void *v)
{
- struct s3c_hsotg *hsotg = seq->private;
+ struct dwc2_hsotg *hsotg = seq->private;
void __iomem *regs = hsotg->regs;
u32 val;
int idx;
@@ -3265,7 +3264,7 @@ static const char *decode_direction(int is_in)
static int ep_show(struct seq_file *seq, void *v)
{
struct s3c_hsotg_ep *ep = seq->private;
- struct s3c_hsotg *hsotg = ep->parent;
+ struct dwc2_hsotg *hsotg = ep->parent;
struct s3c_hsotg_req *req;
void __iomem *regs = hsotg->regs;
int index = ep->index;
@@ -3342,7 +3341,7 @@ static const struct file_operations ep_fops = {
* with the same name as the device itself, in case we end up
* with multiple blocks in future systems.
*/
-static void s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
{
struct dentry *root;
unsigned epidx;
@@ -3388,7 +3387,7 @@ static void s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
*
* Cleanup (remove) the debugfs files for use on module exit.
*/
-static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_delete_debug(struct dwc2_hsotg *hsotg)
{
unsigned epidx;
@@ -3403,27 +3402,21 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
}
/**
- * s3c_hsotg_probe - probe function for hsotg driver
- * @pdev: The platform information for the driver
+ * dwc2_gadget_init - init function for gadget
+ * @dwc2: The data structure for the DWC2 driver.
+ * @irq: The IRQ number for the controller.
*/
-
-static int s3c_hsotg_probe(struct platform_device *pdev)
+int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
{
- struct s3c_hsotg_plat *plat = dev_get_platdata(&pdev->dev);
+ struct device *dev = hsotg->dev;
+ struct s3c_hsotg_plat *plat = dev->platform_data;
struct phy *phy;
struct usb_phy *uphy;
- struct device *dev = &pdev->dev;
struct s3c_hsotg_ep *eps;
- struct s3c_hsotg *hsotg;
- struct resource *res;
int epnum;
int ret;
int i;
- hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL);
- if (!hsotg)
- return -ENOMEM;
-
/* Set default UTMI width */
hsotg->phyif = GUSBCFG_PHYIF16;
@@ -3431,14 +3424,14 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
* Attempt to find a generic PHY, then look for an old style
* USB PHY, finally fall back to pdata
*/
- phy = devm_phy_get(&pdev->dev, "usb2-phy");
+ phy = devm_phy_get(dev, "usb2-phy");
if (IS_ERR(phy)) {
uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
if (IS_ERR(uphy)) {
/* Fallback for pdata */
- plat = dev_get_platdata(&pdev->dev);
+ plat = dev_get_platdata(dev);
if (!plat) {
- dev_err(&pdev->dev,
+ dev_err(dev,
"no platform data or transceiver defined\n");
return -EPROBE_DEFER;
}
@@ -3455,43 +3448,24 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
hsotg->phyif = GUSBCFG_PHYIF8;
}
- hsotg->dev = dev;
-
- hsotg->clk = devm_clk_get(&pdev->dev, "otg");
+ hsotg->clk = devm_clk_get(dev, "otg");
if (IS_ERR(hsotg->clk)) {
- dev_err(dev, "cannot get otg clock\n");
- return PTR_ERR(hsotg->clk);
- }
-
- platform_set_drvdata(pdev, hsotg);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- hsotg->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hsotg->regs)) {
- ret = PTR_ERR(hsotg->regs);
- goto err_clk;
+ hsotg->clk = NULL;
+ dev_dbg(dev, "cannot get otg clock\n");
}
- ret = platform_get_irq(pdev, 0);
- if (ret < 0) {
- dev_err(dev, "cannot find IRQ\n");
- goto err_clk;
- }
-
- spin_lock_init(&hsotg->lock);
-
- hsotg->irq = ret;
-
- dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
-
hsotg->gadget.max_speed = USB_SPEED_HIGH;
hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
hsotg->gadget.name = dev_name(dev);
/* reset the system */
- clk_prepare_enable(hsotg->clk);
+ ret = clk_prepare_enable(hsotg->clk);
+ if (ret) {
+ dev_err(dev, "failed to enable otg clk\n");
+ goto err_clk;
+ }
+
/* regulators */
@@ -3509,7 +3483,7 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
hsotg->supplies);
if (ret) {
- dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret);
+ dev_err(dev, "failed to enable supplies: %d\n", ret);
goto err_supplies;
}
@@ -3520,14 +3494,14 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
s3c_hsotg_hw_cfg(hsotg);
s3c_hsotg_init(hsotg);
- ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0,
- dev_name(dev), hsotg);
+ ret = devm_request_irq(hsotg->dev, irq, s3c_hsotg_irq, IRQF_SHARED,
+ dev_name(hsotg->dev), hsotg);
if (ret < 0) {
s3c_hsotg_phy_disable(hsotg);
clk_disable_unprepare(hsotg->clk);
regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
- dev_err(dev, "cannot claim IRQ\n");
+ dev_err(dev, "cannot claim IRQ for gadget\n");
goto err_clk;
}
@@ -3573,11 +3547,11 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret) {
- dev_err(hsotg->dev, "failed to disable supplies: %d\n", ret);
+ dev_err(dev, "failed to disable supplies: %d\n", ret);
goto err_ep_mem;
}
- ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget);
+ ret = usb_add_gadget_udc(dev, &hsotg->gadget);
if (ret)
goto err_ep_mem;
@@ -3596,47 +3570,44 @@ err_clk:
return ret;
}
+EXPORT_SYMBOL_GPL(dwc2_gadget_init);
/**
* s3c_hsotg_remove - remove function for hsotg driver
* @pdev: The platform information for the driver
*/
-static int s3c_hsotg_remove(struct platform_device *pdev)
+int s3c_hsotg_remove(struct dwc2_hsotg *hsotg)
{
- struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
-
usb_del_gadget_udc(&hsotg->gadget);
-
s3c_hsotg_delete_debug(hsotg);
-
- if (hsotg->driver) {
- /* should have been done already by driver model core */
- usb_gadget_unregister_driver(hsotg->driver);
- }
-
clk_disable_unprepare(hsotg->clk);
return 0;
}
+EXPORT_SYMBOL_GPL(s3c_hsotg_remove);
-static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state)
+int s3c_hsotg_suspend(struct dwc2_hsotg *hsotg)
{
- struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
unsigned long flags;
int ret = 0;
- if (hsotg->driver)
+ mutex_lock(&hsotg->init_mutex);
+
+ if (hsotg->driver) {
+ int ep;
+
dev_info(hsotg->dev, "suspending usb gadget %s\n",
hsotg->driver->driver.name);
- spin_lock_irqsave(&hsotg->lock, flags);
- s3c_hsotg_disconnect(hsotg);
- s3c_hsotg_phy_disable(hsotg);
- hsotg->gadget.speed = USB_SPEED_UNKNOWN;
- spin_unlock_irqrestore(&hsotg->lock, flags);
+ spin_lock_irqsave(&hsotg->lock, flags);
+ if (hsotg->enabled)
+ s3c_hsotg_core_disconnect(hsotg);
+ s3c_hsotg_disconnect(hsotg);
+ hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ s3c_hsotg_phy_disable(hsotg);
- if (hsotg->driver) {
- int ep;
for (ep = 0; ep < hsotg->num_of_eps; ep++)
s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
@@ -3645,57 +3616,37 @@ static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state)
clk_disable(hsotg->clk);
}
+ mutex_unlock(&hsotg->init_mutex);
+
return ret;
}
+EXPORT_SYMBOL_GPL(s3c_hsotg_suspend);
-static int s3c_hsotg_resume(struct platform_device *pdev)
+int s3c_hsotg_resume(struct dwc2_hsotg *hsotg)
{
- struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
unsigned long flags;
int ret = 0;
+ mutex_lock(&hsotg->init_mutex);
+
if (hsotg->driver) {
dev_info(hsotg->dev, "resuming usb gadget %s\n",
hsotg->driver->driver.name);
clk_enable(hsotg->clk);
ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
- hsotg->supplies);
- }
+ hsotg->supplies);
- spin_lock_irqsave(&hsotg->lock, flags);
- hsotg->last_rst = jiffies;
- s3c_hsotg_phy_enable(hsotg);
- s3c_hsotg_core_init(hsotg);
- spin_unlock_irqrestore(&hsotg->lock, flags);
+ s3c_hsotg_phy_enable(hsotg);
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ s3c_hsotg_core_init_disconnected(hsotg);
+ if (hsotg->enabled)
+ s3c_hsotg_core_connect(hsotg);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ }
+ mutex_unlock(&hsotg->init_mutex);
return ret;
}
-
-#ifdef CONFIG_OF
-static const struct of_device_id s3c_hsotg_of_ids[] = {
- { .compatible = "samsung,s3c6400-hsotg", },
- { .compatible = "snps,dwc2", },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, s3c_hsotg_of_ids);
-#endif
-
-static struct platform_driver s3c_hsotg_driver = {
- .driver = {
- .name = "s3c-hsotg",
- .owner = THIS_MODULE,
- .of_match_table = of_match_ptr(s3c_hsotg_of_ids),
- },
- .probe = s3c_hsotg_probe,
- .remove = s3c_hsotg_remove,
- .suspend = s3c_hsotg_suspend,
- .resume = s3c_hsotg_resume,
-};
-
-module_platform_driver(s3c_hsotg_driver);
-
-MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c-hsotg");
+EXPORT_SYMBOL_GPL(s3c_hsotg_resume);
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 0a0e6f0..a0cd9db 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1371,6 +1371,8 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
hsotg->op_state = OTG_STATE_B_PERIPHERAL;
dwc2_core_init(hsotg, false, -1);
dwc2_enable_global_interrupts(hsotg);
+ s3c_hsotg_core_init_disconnected(hsotg);
+ s3c_hsotg_core_connect(hsotg);
} else {
/* A-Device connector (Host Mode) */
dev_dbg(hsotg->dev, "connId A\n");
@@ -1471,6 +1473,30 @@ static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
}
}
+static void dwc2_port_resume(struct dwc2_hsotg *hsotg)
+{
+ u32 hprt0;
+
+ /* After clear the Stop PHY clock bit, we should wait for a moment
+ * for PLL work stable with clock output.
+ */
+ writel(0, hsotg->regs + PCGCTL);
+ usleep_range(2000, 4000);
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_RES;
+ writel(hprt0, hsotg->regs + HPRT0);
+ hprt0 &= ~HPRT0_SUSP;
+ /* according to USB2.0 Spec 7.1.7.7, the host must send the resume
+ * signal for at least 20ms
+ */
+ usleep_range(20000, 25000);
+
+ hprt0 &= ~HPRT0_RES;
+ writel(hprt0, hsotg->regs + HPRT0);
+ hsotg->lx_state = DWC2_L0;
+}
+
/* Handles hub class-specific requests */
static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
u16 wvalue, u16 windex, char *buf, u16 wlength)
@@ -1516,17 +1542,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
case USB_PORT_FEAT_SUSPEND:
dev_dbg(hsotg->dev,
"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
- writel(0, hsotg->regs + PCGCTL);
- usleep_range(20000, 40000);
-
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_RES;
- writel(hprt0, hsotg->regs + HPRT0);
- hprt0 &= ~HPRT0_SUSP;
- usleep_range(100000, 150000);
-
- hprt0 &= ~HPRT0_RES;
- writel(hprt0, hsotg->regs + HPRT0);
+ dwc2_port_resume(hsotg);
break;
case USB_PORT_FEAT_POWER:
@@ -2299,6 +2315,55 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
usleep_range(1000, 3000);
}
+static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg->op_state == OTG_STATE_B_HOST) ||
+ (hsotg->op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ /* TODO: We get into suspend from 'on' state, maybe we need to do
+ * something if we get here from DWC2_L1(LPM sleep) state one day.
+ */
+ if (hsotg->lx_state != DWC2_L0)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if (hprt0 & HPRT0_CONNSTS) {
+ dwc2_port_suspend(hsotg, 1);
+ } else {
+ u32 pcgctl = readl(hsotg->regs + PCGCTL);
+
+ pcgctl |= PCGCTL_STOPPCLK;
+ writel(pcgctl, hsotg->regs + PCGCTL);
+ }
+
+ return 0;
+}
+
+static int _dwc2_hcd_resume(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ u32 hprt0;
+
+ if (!((hsotg->op_state == OTG_STATE_B_HOST) ||
+ (hsotg->op_state == OTG_STATE_A_HOST)))
+ return 0;
+
+ if (hsotg->lx_state != DWC2_L2)
+ return 0;
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ if ((hprt0 & HPRT0_CONNSTS) && (hprt0 & HPRT0_SUSP))
+ dwc2_port_resume(hsotg);
+ else
+ writel(0, hsotg->regs + PCGCTL);
+
+ return 0;
+}
+
/* Returns the current frame number */
static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd)
{
@@ -2669,6 +2734,9 @@ static struct hc_driver dwc2_hc_driver = {
.hub_status_data = _dwc2_hcd_hub_status_data,
.hub_control = _dwc2_hcd_hub_control,
.clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete,
+
+ .bus_suspend = _dwc2_hcd_suspend,
+ .bus_resume = _dwc2_hcd_resume,
};
/*
@@ -2778,6 +2846,9 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
int i, num_channels;
int retval;
+ if (usb_disabled())
+ return -ENODEV;
+
dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n");
/* Detect config values from hardware */
@@ -2839,7 +2910,6 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
hcd->has_tt = 1;
- spin_lock_init(&hsotg->lock);
((struct wrapper_priv_data *) &hcd->hcd_priv)->hsotg = hsotg;
hsotg->priv = hcd;
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index a12bb15..e69a843 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -668,9 +668,6 @@ extern irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg);
*/
extern void dwc2_hcd_stop(struct dwc2_hsotg *hsotg);
-extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
-extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
-
/**
* dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host,
* and 0 otherwise
@@ -680,13 +677,6 @@ extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
extern int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg);
/**
- * dwc2_hcd_get_frame_number() - Returns current frame number
- *
- * @hsotg: The DWC2 HCD
- */
-extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
-
-/**
* dwc2_hcd_dump_state() - Dumps hsotg state
*
* @hsotg: The DWC2 HCD
diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c
index c291fca..a4e724b 100644
--- a/drivers/usb/dwc2/pci.c
+++ b/drivers/usb/dwc2/pci.c
@@ -141,6 +141,13 @@ static int dwc2_driver_probe(struct pci_dev *dev,
pci_set_master(dev);
+ retval = devm_request_irq(hsotg->dev, dev->irq,
+ dwc2_handle_common_intr, IRQF_SHARED,
+ dev_name(hsotg->dev), hsotg);
+ if (retval)
+ return retval;
+
+ spin_lock_init(&hsotg->lock);
retval = dwc2_hcd_init(hsotg, dev->irq, &dwc2_module_params);
if (retval) {
pci_disable_device(dev);
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 121dbda..6a795aa 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -40,6 +40,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/of_device.h>
+#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/usb/of.h>
@@ -121,6 +122,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
dwc2_hcd_remove(hsotg);
+ s3c_hsotg_remove(hsotg);
return 0;
}
@@ -129,6 +131,7 @@ static const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
{ .compatible = "snps,dwc2", .data = NULL },
+ { .compatible = "samsung,s3c6400-hsotg", .data = NULL},
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
@@ -155,9 +158,6 @@ static int dwc2_driver_probe(struct platform_device *dev)
int retval;
int irq;
- if (usb_disabled())
- return -ENODEV;
-
match = of_match_device(dwc2_of_match_table, &dev->dev);
if (match && match->data) {
params = match->data;
@@ -194,6 +194,14 @@ static int dwc2_driver_probe(struct platform_device *dev)
return irq;
}
+ dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
+ irq);
+ retval = devm_request_irq(hsotg->dev, irq,
+ dwc2_handle_common_intr, IRQF_SHARED,
+ dev_name(hsotg->dev), hsotg);
+ if (retval)
+ return retval;
+
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
hsotg->regs = devm_ioremap_resource(&dev->dev, res);
if (IS_ERR(hsotg->regs))
@@ -204,6 +212,11 @@ static int dwc2_driver_probe(struct platform_device *dev)
hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);
+ spin_lock_init(&hsotg->lock);
+ mutex_init(&hsotg->init_mutex);
+ retval = dwc2_gadget_init(hsotg, irq);
+ if (retval)
+ return retval;
retval = dwc2_hcd_init(hsotg, irq, params);
if (retval)
return retval;
@@ -213,10 +226,35 @@ static int dwc2_driver_probe(struct platform_device *dev)
return retval;
}
+static int __maybe_unused dwc2_suspend(struct device *dev)
+{
+ struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (dwc2_is_device_mode(dwc2))
+ ret = s3c_hsotg_suspend(dwc2);
+ return ret;
+}
+
+static int __maybe_unused dwc2_resume(struct device *dev)
+{
+ struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (dwc2_is_device_mode(dwc2))
+ ret = s3c_hsotg_resume(dwc2);
+ return ret;
+}
+
+static const struct dev_pm_ops dwc2_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
+};
+
static struct platform_driver dwc2_platform_driver = {
.driver = {
.name = dwc2_driver_name,
.of_match_table = dwc2_of_match_table,
+ .pm = &dwc2_dev_pm_ops,
},
.probe = dwc2_driver_probe,
.remove = dwc2_driver_remove,
OpenPOWER on IntegriCloud