summaryrefslogtreecommitdiffstats
path: root/drivers/usb/core/hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r--drivers/usb/core/hub.c202
1 files changed, 155 insertions, 47 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 265c2f6..72c51cd 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -62,6 +62,8 @@ struct usb_hub {
resumed */
unsigned long removed_bits[1]; /* ports with a "removed"
device present */
+ unsigned long wakeup_bits[1]; /* ports that have signaled
+ remote wakeup */
#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
#error event_bits[] is too short!
#endif
@@ -411,6 +413,29 @@ void usb_kick_khubd(struct usb_device *hdev)
kick_khubd(hub);
}
+/*
+ * Let the USB core know that a USB 3.0 device has sent a Function Wake Device
+ * Notification, which indicates it had initiated remote wakeup.
+ *
+ * USB 3.0 hubs do not report the port link state change from U3 to U0 when the
+ * device initiates resume, so the USB core will not receive notice of the
+ * resume through the normal hub interrupt URB.
+ */
+void usb_wakeup_notification(struct usb_device *hdev,
+ unsigned int portnum)
+{
+ struct usb_hub *hub;
+
+ if (!hdev)
+ return;
+
+ hub = hdev_to_hub(hdev);
+ if (hub) {
+ set_bit(portnum, hub->wakeup_bits);
+ kick_khubd(hub);
+ }
+}
+EXPORT_SYMBOL_GPL(usb_wakeup_notification);
/* completion function, fires on port status changes and various faults */
static void hub_irq(struct urb *urb)
@@ -823,12 +848,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_ENABLE);
}
- if (portchange & USB_PORT_STAT_C_LINK_STATE) {
- need_debounce_delay = true;
- clear_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_C_PORT_LINK_STATE);
- }
-
if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
hub_is_superspeed(hub->hdev)) {
need_debounce_delay = true;
@@ -850,12 +869,19 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
set_bit(port1, hub->change_bits);
} else if (portstatus & USB_PORT_STAT_ENABLE) {
+ bool port_resumed = (portstatus &
+ USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_U0;
/* The power session apparently survived the resume.
* If there was an overcurrent or suspend change
* (i.e., remote wakeup request), have khubd
- * take care of it.
+ * take care of it. Look at the port link state
+ * for USB 3.0 hubs, since they don't have a suspend
+ * change bit, and they don't set the port link change
+ * bit on device-initiated resume.
*/
- if (portchange)
+ if (portchange || (hub_is_superspeed(hub->hdev) &&
+ port_resumed))
set_bit(port1, hub->change_bits);
} else if (udev->persist_enabled) {
@@ -1293,14 +1319,8 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
- /* Hubs have proper suspend/resume support. USB 3.0 device suspend is
- * different from USB 2.0/1.1 device suspend, and unfortunately we
- * don't support it yet. So leave autosuspend disabled for USB 3.0
- * external hubs for now. Enable autosuspend for USB 3.0 roothubs,
- * since that isn't a "real" hub.
- */
- if (!hub_is_superspeed(hdev) || !hdev->parent)
- usb_enable_autosuspend(hdev);
+ /* Hubs have proper suspend/resume support. */
+ usb_enable_autosuspend(hdev);
if (hdev->level == MAX_TOPO_LEVEL) {
dev_err(&intf->dev,
@@ -1842,6 +1862,37 @@ fail:
return err;
}
+static void set_usb_port_removable(struct usb_device *udev)
+{
+ struct usb_device *hdev = udev->parent;
+ struct usb_hub *hub;
+ u8 port = udev->portnum;
+ u16 wHubCharacteristics;
+ bool removable = true;
+
+ if (!hdev)
+ return;
+
+ hub = hdev_to_hub(udev->parent);
+
+ wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+
+ if (!(wHubCharacteristics & HUB_CHAR_COMPOUND))
+ return;
+
+ if (hub_is_superspeed(hdev)) {
+ if (hub->descriptor->u.ss.DeviceRemovable & (1 << port))
+ removable = false;
+ } else {
+ if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8)))
+ removable = false;
+ }
+
+ if (removable)
+ udev->removable = USB_DEVICE_REMOVABLE;
+ else
+ udev->removable = USB_DEVICE_FIXED;
+}
/**
* usb_new_device - perform initial device setup (usbcore-internal)
@@ -1900,6 +1951,15 @@ int usb_new_device(struct usb_device *udev)
announce_device(udev);
device_enable_async_suspend(&udev->dev);
+
+ /*
+ * check whether the hub marks this port as non-removable. Do it
+ * now so that platform-specific data can override it in
+ * device_add()
+ */
+ if (udev->parent)
+ set_usb_port_removable(udev);
+
/* Register the device. The device driver is responsible
* for configuring the device and invoking the add-device
* notifier chain (used by usbfs and possibly others).
@@ -2385,11 +2445,27 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
* we don't explicitly enable it here.
*/
if (udev->do_remote_wakeup) {
- status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
- USB_DEVICE_REMOTE_WAKEUP, 0,
- NULL, 0,
- USB_CTRL_SET_TIMEOUT);
+ if (!hub_is_superspeed(hub->hdev)) {
+ status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else {
+ /* Assume there's only one function on the USB 3.0
+ * device and enable remote wake for the first
+ * interface. FIXME if the interface association
+ * descriptor shows there's more than one function.
+ */
+ status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE,
+ USB_RECIP_INTERFACE,
+ USB_INTRF_FUNC_SUSPEND,
+ USB_INTRF_FUNC_SUSPEND_RW |
+ USB_INTRF_FUNC_SUSPEND_LP,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ }
if (status) {
dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
status);
@@ -2679,6 +2755,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev = hub->hdev;
unsigned port1;
+ int status;
/* Warn if children aren't already suspended */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -2691,6 +2768,17 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
return -EBUSY;
}
}
+ if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
+ /* Enable hub to send remote wakeup for all ports. */
+ for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+ status = set_port_feature(hdev,
+ port1 |
+ USB_PORT_FEAT_REMOTE_WAKE_CONNECT |
+ USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT |
+ USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT,
+ USB_PORT_FEAT_REMOTE_WAKE_MASK);
+ }
+ }
dev_dbg(&intf->dev, "%s\n", __func__);
@@ -3424,6 +3512,46 @@ done:
hcd->driver->relinquish_port(hcd, port1);
}
+/* Returns 1 if there was a remote wakeup and a connect status change. */
+static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
+ u16 portstatus, u16 portchange)
+{
+ struct usb_device *hdev;
+ struct usb_device *udev;
+ int connect_change = 0;
+ int ret;
+
+ hdev = hub->hdev;
+ udev = hdev->children[port-1];
+ if (!hub_is_superspeed(hdev)) {
+ if (!(portchange & USB_PORT_STAT_C_SUSPEND))
+ return 0;
+ clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND);
+ } else {
+ if (!udev || udev->state != USB_STATE_SUSPENDED ||
+ (portstatus & USB_PORT_STAT_LINK_STATE) !=
+ USB_SS_PORT_LS_U0)
+ return 0;
+ }
+
+ if (udev) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+
+ usb_lock_device(udev);
+ ret = usb_remote_wakeup(udev);
+ usb_unlock_device(udev);
+ if (ret < 0)
+ connect_change = 1;
+ } else {
+ ret = -ENODEV;
+ hub_port_disable(hub, port, 1);
+ }
+ dev_dbg(hub->intfdev, "resume on port %d, status %d\n",
+ port, ret);
+ return connect_change;
+}
+
static void hub_events(void)
{
struct list_head *tmp;
@@ -3436,7 +3564,7 @@ static void hub_events(void)
u16 portstatus;
u16 portchange;
int i, ret;
- int connect_change;
+ int connect_change, wakeup_change;
/*
* We restart the list every time to avoid a deadlock with
@@ -3515,8 +3643,9 @@ static void hub_events(void)
if (test_bit(i, hub->busy_bits))
continue;
connect_change = test_bit(i, hub->change_bits);
+ wakeup_change = test_and_clear_bit(i, hub->wakeup_bits);
if (!test_and_clear_bit(i, hub->event_bits) &&
- !connect_change)
+ !connect_change && !wakeup_change)
continue;
ret = hub_port_status(hub, i,
@@ -3557,31 +3686,10 @@ static void hub_events(void)
}
}
- if (portchange & USB_PORT_STAT_C_SUSPEND) {
- struct usb_device *udev;
+ if (hub_handle_remote_wakeup(hub, i,
+ portstatus, portchange))
+ connect_change = 1;
- clear_port_feature(hdev, i,
- USB_PORT_FEAT_C_SUSPEND);
- udev = hdev->children[i-1];
- if (udev) {
- /* TRSMRCY = 10 msec */
- msleep(10);
-
- usb_lock_device(udev);
- ret = usb_remote_wakeup(hdev->
- children[i-1]);
- usb_unlock_device(udev);
- if (ret < 0)
- connect_change = 1;
- } else {
- ret = -ENODEV;
- hub_port_disable(hub, i, 1);
- }
- dev_dbg (hub_dev,
- "resume on port %d, status %d\n",
- i, ret);
- }
-
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
u16 status = 0;
u16 unused;
OpenPOWER on IntegriCloud